KA 046
Contents
1. ADJUSTMENTS A Warning Before riding always make sure that the basic settings made by Ohlins are according to recommended Set up Data Read about adjustments and setting up in the Ohlins Owner s Manual before you make any adjustments Contact an Ohlins dealer if you have any questions about setting up Spring Preload Adjuster SET UP DATA Recommended set up Gas fill screw Rebound damping adjuster Rebound ccceererscneeeetee 16 clicks Shock absorber data Lengths iidsed 330 mm Spring SIOK naear 63 mm Patt NOs ciecessevtecesdeiscccteetess 01091 31 Spring Rate 95 N mm Spring Preload 15mm Ohlins products are subject to continuous improvement and development therefore although these instructions include the most up to date information available at the time of printing minor updates may occur Ohlins Racing AB All rights reserved Any reprinting or unauthorized use without the written permission of Ohlins Racing AB is prohibited To find the latest information contact an Ohlins distributor Please contact Ohlins if you have any questions regarding the contents in this document Part no MI_KA046_1 Issued 2011 12 09 Ohlins Racing AB Box 722 S 194 27 Upplands Vasby Sweden Phone 46 8 590 025 00 fax 46 8 590 025 80 ADVANCED SUSPENSION TECHNOLOGY www ohlins com Note Please note that this imag2. e Ohlins shock absorber using the screws from the original attachments The gas fill screw should point backwards Do not tighten yet Note Lower the vehicle so that the suspension is slightly compressed before tightening the screws 4 Tighten all screws W Caution Ensure that all screws are tightened to the correct torque and that nothing fouls or restricts movement of the shock absorber front fork steering damper when the suspension is fully compressed or extended
3. e is a general representation of the product and may differ slightly from your product Note Please note that during storage and transportation especially at high ambient temperature some of the oil and grease used for assembling may leak and stain the packaging This is in no way detrimental to the product wipe off the excessive oil grease with a cloth Product for Kawasaki ZZR1400 Before installing this product check the contents of the kit If anything is missing please contact an Ohlins dealer Kit Contents Part No Pcs Shock absorber KA046 1 Ohlins sticker 00192 01 2 C spanner 00710 02 1 Memo notes sticker 01180 01 1 Owners manual 07241 02 1 A Warning Before installing this product read the Ohlins Owner s Manual The shock absorber front fork steering damper is an important part of your vehicle and will affect the stability KA O46 Mounting Instructions ADVANCED SUSPENSION TECHNOLOGY A Warning lt is advisable to have an Ohlins dealer install the shock absorber front fork steering damper A Warning If working on a raised vehicle ensure it is securely supported so that it will not tip Note Before mounting this product clean the vehicle thoroughly Note When working on this product always see the Vehicle Service Manual for vehicle specific procedures and important data 1 Remove the original shock absorber 2 Install th
Download Pdf Manuals
Related Search