Installation manual
Contents
1. C Input External Alarm 24h 7 White blue lt Signalizaton LED diode Input External Alarm Y N S DEVICE PLACEMENT IN VEHICLE place the device under the cockpit board or under middle column released itself use tightening tapes as well as bilateral tapes included in packaging do not place device very close to upper part of cockpit board extremely high temperatures could be reached there device must be placed to fixed part of vehicle and cabling must be completely taped over do not place device to places where it could be exposed to pressure WARNING Tools service manual a technical expertise is required for installation Before you stick on alarm parts always clean certain point by cleaner and let it dry for 10 minutes Do not touch that place anymore GSM ANTENNA PLACEMENT N Clean the point where to stick antenna do not stick on the GSM antenna on metallic part do not place it close to cabled distribution loud speakers nether to the area of RFID antenna connect the antenna to relevant connector WARNING Fix the cable harness of alarm with tightening tapes in the way that it could not be damaged and it would not causeany interference noise while driving antenna should not be seen from outside and should not be easy accessible g GPS ANTENNA PLACEMENT place the GPS antenna the way that it can reach the best signal towards the sky2. antenna can not by shadowed by metallic parts of vehicle plastic parts of car body do not make antenna signal worse window with anti freeze device or electroplated glass can make antenna signal worse connect it to relevant connector Upper side GPS antenna a LED PILOT LAMP PLACEMENT place the LED pilot lamp to relevant point on windscreen or to panel put the cable through under the fascia board RFID ANTENNA PLACEMENT Stick on the RFID antenna under the fascia board next to the ignition cables it can not be placed close to metallic parts do not place it around the ignition key point RFID antenna must be placed at least 40 cm from GSM antenna connect it to relevant connector its range is at least 8 cm RFID antenna Above mentioned information are informative only and that is why it is necessary to control signals before connection of wires The manufacturer is allowed to modify this information anytime Company ZADAKO is not responsible for any damages caused to the vehicle in case of wrong installation zadako wireless solutions Car alarm Z1 INSTALLATION MANUAL version 1 1 Warning Car alarm Z1 is dedicated to proffesional installation in authorized service only While work follow the safety regulation for work with electric appliences Follow this manual at installation Service man is not allowed to destroy safety
3. TECHNICAL FEATURES Disconnect the battery Power supply Operational temperatures Consumption Max consumption Max amperage of built in relay o 40 to 85 lt 12mA 12V 600 mA 12V E S 3A 24V GSM GPRS 900 1800 1900MHz 137x62x32 mm EHK 97 01 STN 30 4002 EMC E27 97RA 01 1039 00 oY GSM frequency Device size Conforms to a Homologization number in rest that means that the vehicle stands without moving for more than N 3 minutes GPS is not active POWER SUPPLY Positive terminal Extension from fuse case Negative terminal Ground point to be attached to original screw CONTROL 15 Device control to be attached to conductor from ignition box A Pull out the SIM card holder by pushing the yellow button placed next to the SIM card holder before you insert SIM card to device make sere that SIM card s PIN code protection is turned off insert SIM card to device only SIM card dedicated to this device with a different one device will not work connect conductors according to following picture RFID antenna GPS antenn GSM antenna Ground 4 plus auto battery 12V pae plus backup battery 6 9V F l Green red switching contact RELAY no ignition key Green blue break contact RELAY NC Green black e common contact RELAY
4. stickers and to take apart device or its parts neither he is allowed to make any modifications of device or its parts Manufacturer is not responsible for any damages caused to the vehicle in case of wrong installation or relevant accessories Car alarm is dedicated for installation into vehicle interior under dash board into cargo or luggage space of vehicle Attention it is necessary to install the car alarm on save and dry place No liquids neither water can get into the device Car alarm is suitable for vehicles with a dashboard voltage supply of 12V and with negative ground connection For correct use of service abroad it is necessary to have the roaming or any other suitable program activated on the SIM card installed in device Telephone numbers must be saved with international preset 421 for example 421911223344 X After the life time of device we recommend to give the device to electric waste disposal
Download Pdf Manuals
Related Search