System Board D2509 for TX200 S4
Contents
1. Super VO 07 DIMM3B ac DIMM2B 25 Bc DIMM1B pci DIMM3A pci DIMM2A 19 DIMM1A CPU 1 O O MCH CPU 2 ger 24 In TL ell 23 E LAN E Gaal PCI X 64 Bit 133 MHz IOOP L 3 y El U 7 Hm PCI X 64 Bit 133 MHz IOOP Lt Ll m PCI 32 Bit 33 MHz L 1 e RMC PCle x8 gt 1 a PCle x8 3 E prole OBE LLI i N 21 20 19 1817 16 al Rhu0nNn 0O0 OO NO Figure 5 Schematic view of the system board D2509 1 Printer optional 14 Intrusion 2 Power supply PWR1 15 Floppy disk drive 3 Power supply PWR3 16 SATA MLC1 4 Slots for main memory modules 17 SATA 5 5 Power supply PWR2 18 SATA 6 6 USB stick 19 Battery 7 System fan 1 20 System fan 2 8 PC98 21 RAID key SATA SW RAID 9 Front panel 22 PCI slots 24 Technical Manual D2509 TX200 S4 Features Interfaces and connectors 10 USB Front 23 System fan 3 11 DIP switch see page 27 24 Redundant system fan 4 12 USB1 AUX 25 External ports 13 USB2 AUX RAID key The SATA SW RAID 5 functionality will be activated by installing a license key2. or 2xPCle x4 slots and 1x PCle x8 slot optional or 2x PCle x8 slots optional 1x PCI slot 32 bit 33 MHz 14 Technical Manual D2509 TX200 S4 Features Overview BIOS features Phoenix System BlOS V 4 06 Rompilot SMBIOS 2 4 DMI MultiProcessor Specification 1 4 Server Hardware Design Guide 3 0 WIM 2 0 ACPI 2 0 support USB keyboard mouse boot possible from 120 MB floppy disk drive CD ROM DVD hard disk LAN console redirection support OEM logo CPU memory disable hotspare memory support Environmental protection battery in holder Form factor SSI EEB Baseboard 304 8 x 330 2 mm 12 x 13 inch CSS Customer Self Service This system board supports the CSS functionality You will find a description of CSS functionality in the operating manual of your server D2509 TX200 S4 Technical Manual 15 Main memory Features 3 2 Main memory The system board supports up to 16 Gbyte main memory 6 slots 8 memory banks with 2 modules are available for the main memory Each memory bank can be populated with two 512 Mbyte 1 Gbyte 2 Gbyte or 4 Gbyte FBD533 PC2 4200F or FDB667 PC2 5300F fully buffered DIMM memory modules As in the basic configuration memory bank 1 is populated the memory exten sions can be performed up to two times for memory bank 2 and 3 ECC with memory scrubbing and with the Single Device Data Correction
3. 20 3 5 Temperature system monitoring 20 3 6 LEDS 2222222252224 eae eee 22 3 7 Interfaces and connectors s 24 3 7 1 External pols a resar 22486648 8d bee Rok RO 25 3 8 Settings with switches 27 4 Replacing the lithium battery 29 ABDIGVIAIONS ra SES FER ETE SUR REGUM eee 31 D2509 TX200 S4 Technical Manual 1 Introduction This technical manual describes the system board D2509 which can be equipped with one or two Intel XEON processors Further information about drivers is provided in the readme files on the hard disk on the supplied ServerStart or Update CDs You will find further information in the BIOS description Notational conventions The meanings of the symbols and fonts used in this manual are as follows italics indicates commands menu items file and path names or software programs fixed font indicate system output on the monitor semi bold fixed indicates values to be entered through the keyboard font Key symbol indicates keys according to their representation on the keyboard If capital letters are to be entered explicitly then the Shift key is shown e g SHIFT A for A If two keys need to be pressed at the same time then this is shown by placing a hyphen between the two key symbols quotation marks indicates names and terms that are being empha sized indicates an oper
4. ECC Error Correction Code EEPROM Electrical Erasable Programmable Read Only Memory EPROM Erasable Programmable Read Only Memory EMRL Embedded RAID Logic EVRD Enterprise VRD HPC Hot plug Controller ICE In Circuit Emulation IDE Integrated intelligent Drive Electronics IME Integrated Mirror Enhanced IOOP Intelligent Organization Of PCI IPMB Intelligent Plattorm Management Bus 32 Technical Manual D2509 TX200 S4 Abbreviations IPMI Intelligent Platform Management Interface iRMC integrated Remote Management Controller LAN Local Area Network LED Light Emitting Diode MPS Multi Processor Specification NMI Non Maskable Interrupt OEM Original Equipment Manufacturer OHCI Open Host Controller Interface OS Operating System PCI Peripheral Components Interconnect PDA Prefailure Detection and Analyzing PIO Programmed Input Output PLD Programmable Logic Device PS U Power Supply Unit D2509 TX200 S4 Technical Manual 33 Abbreviations PWM Puls Wide Modulation PXE Preboot eXecution Environment RAID Redundant Array of Inexpensive Disks RSB Remote Service Board RST ReSeT RTC Real Time Clock SAS Serial Attached SCSI SATA Serial ATA SCSI Small Computer Systems Interface SDDC Single Device Data Correction SDRAM Synchronous Dynamic Random Access Memory SHDG Server Hardware Design Guide SMB System Management Bus SMM Server
5. LAN connector single channel Gigabit LAN controller 1 LAN transfer rate green off transfer rate 10 Mbit s yellow green on transfer rate 100 Mbit s yellow jon transfer rate 1000 Mbit s 2 LAN link activity green on LAN connection off no LAN connection flashing LAN transfer 26 Technical Manual D2509 TX200 S4 Features Settings with switches EXEI Figure 8 LAN connector service LAN controller 1 LAN transfer rate green off transfer rate 10 Mbit s green on transfer rate 100 Mbit s 2 LAN link activity green on LAN connection off no LAN connection flashing LAN transfer 3 8 Settings with switches ON 99 M Figure 9 DIP switch il Preset for switches 1 to 4 Off Recovering System BIOS switch 1 Switch 1 enables recovery of the old system BIOS after an attempt to update has failed To restore the old system BIOS you need a Flash BIOS Diskette please call our customer service centre on The system boots from the Flash BIOS floppy disk from drive A and reprograms the system BIOS on the board off The System BIOS is started with the system BIOS from the system board default setting D2509 TX200 S4 Technical Manual Settings with switches Features Skipping the password query switch 2 Switch 2 is
6. Management Mode 34 Technical Manual D2509 TX200 S4 Abbreviations SMP Symmetrically Multi Processing UHCI Unified Host Controller Interface USB Universal Serial Bus VGA Video Graphics Adapter VRD Voltage Regulator Down VRM Voltage Regulator Module WfM Wired for Management WOL Wake up On LAN D2509 TX200 S4 Technical Manual 35 co FUJITSU Information on this document On April 1 2009 Fujitsu became the sole owner of Fujitsu Siemens Compu ters This new subsidiary of Fujitsu has been renamed Fujitsu Technology So lutions This document from the document archive refers to a product version which was released a considerable time ago or which is no longer marketed Please note that all company references and copyrights in this document have been legally transferred to Fujitsu Technology Solutions Contact and support addresses will now be offered by Fujitsu Technology So lutions and have the format ts fujitsu com The Internet pages of Fujitsu Technology Solutions are available at http ts fujitsu com and the user documentation at hrrp manuals ts fujitsu com Copyright Fujitsu Technology Solutions 2009 Hinweise zum vorliegenden Dokument Zum 1 April 2009 ist Fujitsu Siemens Computers in den alleinigen Besitz von Fujitsu bergegangen Diese neue Tochtergesellschaft von Fujitsu tr gt seit dem den Namen Fujitsu Technology Solutions Das vorliegende Dokument aus dem Dokume
7. TX200 S4 Technical Manual 17 PCI slots Features PCI slots The following table shows an overview of the PCI slots PCI slot Type Function mechanical 1 PCle x8 PCle x4 or PCle x8 slot optional 2 PCle x8 PCle x4 slot or not available if slot 1 x8 optional 3 PCI 32 32 bit PCI slot PCI X 64 64 bit PCI X slot PCI X 64 133 MHz if only one card has been populated in slot 4 or 5 100 MHz for population with 2 cards PCle x8 PCle x4 or PCle x8 slot optional 7 PCle x8 PCle x4 slot or not available if slot 6 x8 optional IOOP M PCI bus speed optimization The hardware of the system board optimizes the PCI bus speed of the slots 4 and 5 depending on the slots population the PCI bus speed is 133 MHz if only one of the two slots or no slot is populated the PCI bus speed is 100 MHz for all other population variants for slot 4 and 5 PCI PCI X PCI Express interrupts Each device connected to a PCI bus a PCI X bus or PCI Express can use up to four interrupt signals depending on the functionality PCI and PCI X buses use four lines named INTA to INTD typically connected to all devices on the bus in order to periodically balance interrupt load An interrupt signal may thereby be used simultaneously by multiple devices interrupt sharing PCI Express devices send their interrupts through messages The interrupts are defined by the system design 18 Technica
8. To return your used device please use the return and collection systems available to you You will find further information on this at www fujitsu siemens com recycling For details on returning and reuse of devices and consumables within Europe refer to the Returning used devices manual or contact your Fujitsu Siemens Computers branch office subsidiary or our recycling centre in Paderborn Fujitsu Siemens Computers Recycling Center D 33106 Paderborn Tel 49 5251 8 18010 Fax 49 5251 8 18015 12 Technical Manual D2509 TX200 S4 3 Features 3 1 Overview Processors 1or2 Intel Xeon processors with socket LGA771 supported processors quad core Intel Xeon 5400 series quad core Intel Xeon 5300 series dual core Intel Xeon 5200 series dual core Intel Xeon 5100 series 2x VRM 11 0 onboard EVRD Main memory 6 slots for main memory FBD533 PC2 4200F or FDB533 PC2 5300F Fully Buffered DIMM memory modules with 512 MB 1 Gbyte 2 Gbyte and 4 Gbyte Maximum 24 Gbyte of memory 6 memory modules Minimum 1 Gbyte 2 memory modules Maximum 12 5 or 16 Gbyte s bandwidth Supports 2 way interleaved memory subsystems 2 identical memory modules have to installed at the same time ECC multiple bit error detection and single bit error correction Memory scrubbing function Single Device Data Correction SDDC function Chipkill Chips on the system boa
9. expansions that are allowed for the system board If you install other expansions you may damage the requirements and rules governing safety and electromagnetic compatibility or your system Information on which system expansions are suitable can be obtained from the customer service centre or your sales outlet e The warranty expires if the device is damaged during the installation or replacement of system expansions D2509 TX200 S4 Technical Manual 7 Notes on safety Important notes N Batteries Components can become very hot during operation Ensure you do not touch components when making extensions to the system board There is a danger of burns Transmission lines to peripheral devices must be adequately shielded To the LAN wiring the requirements apply in accordance with the standards EN 50173 and EN 50174 1 2 As minimum requirement the use of a protected LAN line of category 5 for 10 100 MBps Ethernet and or of category 5e for Gigabit Ethernet is considered The requirements of the specification ISO IEC 11801 are to be considered Never connect or disconnect data transmission lines during a storm lightning hazard CAUTION Incorrect replacement of lithium battery may lead to a risk of explosion The batteries may only be replaced with identical batteries or with a type recommended by the manufacturer It is essential to observe the instructions in chapter Replacing the lithium battery Tec
10. RAID key 3 7 1 External ports 3 4 a BE OJO SITE 330 O 4 OJO O pa 10 9 8 76 5 Figure 6 External ports of the system board D2509 1 CSS LED yellow 6 USB port Global Error LED orange Identifications LED blue 2 PS 2 mouse connector 7 USB port 3 serial interface COM2 8 VGA port 4 LAN connector 1 service LAN 9 serial interface COM1 5 LAN connector 2 10 PS 2 keyboard connector The serial interface COM1 can be used as default interface or to communicate with the iRMC D2509 TX200 S4 Technical Manual 25 Interfaces and connectors Features LAN connectors On this system board you will find two LAN controllers a single channel Gigabit LAN controller and a service LAN controller The single channel Gigabit LAN controller supports the transfer rates of 10 Mbit s 100 Mbit s and 1 Gbit s The Service LAN controller supports the transfer rates of 10 Mbit s and 100 Mbit s The LAN controllers support WOL function through Magic Packet It is also possible to boot a device without its own boot hard disk via LAN Intel PXE or iSCSI Boot can be used The LAN1 port serves as management interface and is prepared for RemoteView The LAN connectors are equipped each with two LEDs light emitting diode indicating the transfer rate and the activity Figure 7
11. SDDC function is supported You will find the descriptions how to install memory modules in the Options Guide of your server Module population DIMM 3B DIMM 2B DIMM 1B DIMM 3A DIMM 2A DIMM 1A Figure 2 Main memory The memory modules have to be based on x4 or x8 organized single or dual ranked FBD533 PC2 4200F or FDB667 PC2 5300 fully buffered DIMM modules and must be populated in pairs It is only allowed you use memory modules released by Fujitsu Siemens Computers Each pair must consist of identical memory modules 2 way interleaved mode The module capacity between pairs can differ pair 1A 1B can be populated with two 512 Mbyte modules and pair 2A 2B with two 1 Gbyte modules 16 Technical Manual D2509 TX200 S4 Features PCI slots Following table shows the mandatory population order module pair 1A 1B black module pair 2A 2B blue module pair 3A 3B blue populated empty empty populated populated empty populated populated populated 3 3 PCI slots Slot 7 PCle x8 Slot 6 PCle x8 Slot 5 PCI X 64 Bit 133 MHz loop Slot 4 PCI X 64 Bit 133 MHz IOOP Slot 3 PCI 32 Bit 33 MHz Slot 2 PCle x8 Slot 1 PCle x8 Figure 3 Mechanical PCI slots D2509
12. ation that to be performed gt CAUTION indicates warnings which if ignored will endanger your health destroy the system or lead to the loss of data Li indicates additional information notes and tips Table 1 Notational conventions D2509 TX200 S4 Technical Manual 2 Important notes In this chapter you will find essential information regarding safety when working with your server CAUTION With the system board installed you must open the system to access the system board How to access the system board of your system is described in the appropriate service supplement When handling the system board refer to the specific notes on safety in the operating manual and or service supplement for the respective server 2 1 Notes on safety CAUTION e The actions described in these instructions should only be performed by authorized qualified personnel Equipment repairs should only be performed by qualified staff Any failure to observe the guidelines in this manual and any unauthorized openings and improper repairs could expose the user to risks electric shock fire hazards and could also damage the equipment Please note that any unauthorized openings of the device will result in the invalidation of the warranty and exclusion from all liability e Transport the device only in the antistatic original packaging or in packaging that protects it from knocks and jolts e Only install
13. be switched on until they need to be used and should be switched off during long breaks and on completion of work Notes on packaging Please do not throw away the packaging We recommend that you do not throw away the original packaging in case you need it later for transporting Notes on dealing with consumables Please dispose batteries in accordance with local government regulations Do not throw batteries and accumulators into the household waste They must be disposed of in accordance with local regulations concerning special waste All batteries containing pollutants are marked with a symbol a crossed out rubbish bin on wheels In addition the marking is provided with the chemical symbol of the heavy metal decisive for the classification as a pollutant Cd Cadmium Hg Mercury Pb Lead Notes on labeling plastic housing parts Please avoid attaching your own labels to plastic housing parts wherever possible since this makes it difficult to recycle them D2509 TX200 S4 Technical Manual 11 Environmental Protection Important notes Returning recycling and disposal The device may not be disposed of with household rubbish This appliance is labelled in accordance with European Directive 2002 96 EC concerning used electrical and electronic appliances waste electrical and electronic equipment WEEE The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU
14. ected it is possible to indicate the faulty component by pressing the indicate CSS button 22 Technical Manual D2509 TX200 S4 Features LEDs The LEDs have the following meaning Global Error LED LED Indicator Meaning A Identification blue server is identified via ServerView B CSS yellow indicates a prefailure Customer Self Yellow flashing indicates a failure Service C GEL orange indicates a prefailure orange flashing indicates a failure Reasons for a failure may be overheating of one of the sensors sensor defect fan defect CPU error Software detected an error D1 board yellow aux voltage available D2 board green system running D3 board red configuration error The system board will be held in reset Possible configuration errors are e g old CPU populated CPUs with different FSB requirements populated CPU1 not populated D4 board green flashing iRMC server management controller is ok off iRMC not alive E memory off memory module running orange memory module failure F system off fan running fans orange fan failure G CPU fans off fan running orange fan failure H PCI card off PCI card okay orange PCI card failure D2509 TX200 S4 Technical Manual 23 Interfaces and connectors Features 3 7 Interfaces and connectors N wo gt a
15. event damage to the system board the components and conductors on it please take great care when you insert or remove boards Take great care to ensure that extension boards are slotted in straight without damaging components or conductors on the system board or any other components for example EMI spring contacts Be careful with the locking mechanisms catches centring pins etc when you replace the system board or components on it for example memory modules or processors Never use sharp objects screwdrivers for leverage 2 2 CE Certificate The shipped version of this board complies with the requirements C ofthe EEC directive 89 336 EEC Electromagnetic compatibility Compliance was tested in a typical PRIMERGY configuration 10 Technical Manual D2509 TX200 S4 Important notes Environmental Protection 2 3 Environmental Protection Environmentally friendly product design and development This product has been designed in accordance with standards for environmen tally friendly product design and development This means that the designers have taken into account important criteria such as durability selection of materials and coding emissions packaging the ease with which the product can be dismantled and the extent to which it can be recycled This saves resources and thus reduces the harm done to the environment Notes on saving energy Devices that do not have to be on permanently should not
16. hnical Manual D2509 TX200 S4 Important notes Notes on safety Modules with electrostatic sensitive components Systems and components that might be damaged by electrostatic discharge ESD are marked with the following label A AteS When you handle components fitted with ESDs you must observe the following points under all circumstances Figure 1 ESD label e You must always discharge yourself of static charges e g by touching a grounded object before working e The equipment and tools you use must be free of static charges e Remove the power plug from the power socket before inserting or removing boards containing ESDs e Always hold boards with ESDs by their edges e Never touch pins or conductors on boards fitted with ESDs e Use a grounding cable designed for this purpose to connect yourself to the system unit as you install deinstall the board e Place all components on a static safe base You will find a detailed description for handling ESD components in the relevant European or international standards EN 61340 5 1 ANSI ESD S20 20 D2509 TX200 S4 Technical Manual 9 CE Certificate Important notes Notes about boards During installation deinstallation of the system board observe the specific instructions described in the service manual for the server Remove the plug from the mains outlet so that system and system board are totally disconnected from the mains voltage To pr
17. l Manual D2509 TX200 S4 Features PCI slots The following interrupt signals are used in the system Slot device Property Interrupt signal VGA iRMC graphic PCI INTA LAN BCM5708c Single Channel PCI INTB Slot 7 PCle x8 PCI_INTA PCI_INTB PCI_INTC PCI_INTD Slot 6 PCle x8 PCI_INTA PCI_INTB PCI_INTC PCI_INTD Slot 5 PCI X 133 MHz PCI X INTC PCI X INTD PCI X INTA PCI X INTB Slot 4 PCI X 133 MHz PCI X INTA PCI X INTB PCI X INTC PCI X INTD Slot 3 PCI 33 MHz PCI INTC PCI INTD PCI INTA PCI INTB Slot 2 PCle x8 PCI_INTA PCI_INTB PCI_INTC PCI_INTD Slot 1 PCle x8 PCI_INTA PCI_INTB PCI_INTC PCI_INTD Assignment of the PCI interrupts If you select Auto in the BIOS setup the interrupts are assigned automatically and no further settings are required D2509 TX200 S4 Technical Manual 19 Screen resolution Features 3 4 Screen resolution Depending on the operating system used the screen resolutions in the following table refer to the graphic controller on the system board The graphic controller is integrated in the iRMC integrated Remote Management Controller Screen resolution Supported colors 640x480 8 bit 16 bit 24 bit 800x600 8 bit 16 bit 24 bit 1024x768 8 bit 16 bit 24 bit 1152x864 8 bit 16 bit 24 bit 1280x1024 8 bit 16 bit 24 bit 1600x1200 8 bit 16 bit If you are using an external graphic co
18. ntenarchiv bezieht sich auf eine bereits vor l ngerer Zeit freigegebene oder nicht mehr im Vertrieb befindliche Produktversion Bitte beachten Sie dass alle Firmenbez ge und Copyrights im vorliegenden Dokument rechtlich auf Fujitsu Technology Solutions bergegangen sind Kontakt und Supportadressen werden nun von Fujitsu Technology Solutions angeboten und haben die Form ts fujitsu com Die Internetseiten von Fujitsu Technology Solutions finden Sie unter http de ts fujitsu com und unter Attp manuals ts fujitsu com finden Sie die Benutzerdokumentation Copyright Fujitsu Technology Solutions 2009
19. ntroller you will find details of supported screen resolutions in the operating manual or technical manual supplied with the graphic controller 3 5 Temperature system monitoring Temperature and system monitoring aim to reliably protect the computer hardware against damage caused by overheating In addition any unnecessary noise is also prevented by reducing the fan speed and information is provided about the system status The following functions are supported Temperature monitoring Measurement of the processor and the system internal temperature by an onboard temperature sensor measurement of the ambient temperature by a 12C temperature sensor Fan monitoring The CPU power supply unit and system fans are monitored Fans that are no longer available blocked or sticky fans are detected 20 Technical Manual D2509 TX200 S4 Features Temperature system monitoring Fan control The fans are regulated according to temperature Sensor monitoring The removal of or a fault in a temperature sensor is detected Should this happen all fans monitored by this sensor run at maximum speed to achieve the greatest possible protection of the hardware Voltage monitoring When voltage exceeds warning level high or falls below warning level low an alert will be generated Cover monitoring Unauthorized opening of the cover is detected even when the system is switched off However this will only be indicated when the
20. rd Intel 5000Z chip set Single channel Gigabit LAN controller Broadcom 5708C Service LAN controller 10 100 PHY SMSC 8700 Super I O controller SMSC 47M107 1 MB Flash BIOS Server Management with FSC iRMC VGA controller integrated in iRMC 8MBx16 Flash for iRMC 512KBx16 SRAM for iRMC Thermal and system management controller ADT7462 D2509 TX200 S4 Technical Manual 13 Overview Features Internal connectors 1 floppy disk connector 34 pin 1IDE primary 6 Serial ATA PC signaling connector SAS activity connector HD LED ATX power connector 24 pin 12V 12V 5V 3 3V and 5V auxiliary ATX power connector 8 pin 2x 12V ATX power connector 4 pin 1x 12V PC98 connector front panel dual USB type C for USB port on front side 2 USB connectors for optical drives 1USB connector for internal USB stick S connectors for system fans 4 pin 1 connector for system fan 5 pin intrusion connector 1RAID key External connectors 2serial ports COM1 COM2 1 parallel port optional 2 PS 2 interfaces for keyboard and mouse 2 USB 2 0 ports with 480 Mbits s rear side 1 VGA port 2 RJ45 LAN ports PCI slots 2x PCI X slots 64 bit 133 MHz IOOP 4xPCI Express slots Gen1 mechanical PCle x8 the slots can be switched in different ways 4x PCIe x4 slots standard
21. system Board D2509 for TX200 S4 Technical Manual Edition October 2007 Comments Suggestions Corrections The User Documentation Department would like to know your opinion of this manual Your feedback helps us optimize our documentation to suit your individual needs Feel free to send us your comments by e mail to manuals fujtsu siemens com Certified documentation according to DIN EN ISO 9001 2000 To ensure a consistently high quality standard and user friendliness this documentation was created to meet the regulations of a quality management system which complies with the requirements of the standard DIN EN ISO 9001 2000 cognitas Gesellschaft f r Technik Dokumentation mbH www cognitas de Copyright and Trademarks Copyright 2007 Fujitsu Siemens Computers GmbH All rights reserved Delivery subject to availability right of technical modifications reserved All hardware and software names used are trademarks of their respective manufacturers Contents 1 atro eT IBI us 22 20 8 Boo e 5 2 Important notes lt as case kee e ee ween RR an 7 2 1 Notes ONSAIEN uu rum oo Re a Soe ns 7 2 2 CECOIHIGaIe anao mw Heese a E Rer mme s 10 2 3 Environmental Protection 11 3 a j i p erregen 13 3 1 OwvervigW 1 2 232 932x2222xR3c4RRRERG 13 3 2 Mail IBembrV 64645544 e d ox ee RO YR nen 16 3 3 PCISIGIS zn ss gEe3JGccqNSREE GN XE Rex BE 17 3 4 Screen resolution
22. system is switched on again System Event Log SEL All monitored events of the system board are signalized via the Global Error LED and recorded in the System Event Log They could be retrieved in the BIOS Setup or via ServerView PRIMERGY Diagnostic LEDs Optical signaling through the LEDs on the system board identifies defective modules and components as well as gaining information on the PDA D2509 TX200 S4 Technical Manual 21 LEDs Features Super G VO DIMM3B DIMM2B DIMM1B DIMM3A DIMM2A DIMM1A UU CPU 1 Ej A FF MCH CPU 2 F PCle x8 EI LAN H PCle x8 II m ON PCI X 64 Bit 133 MHz IOOP L 1 Fir H 7234 4 PCI X 64 Bit 133 MHz IOOP a PCI 32 Bit 33 MHz L__ oO iRMC Hi PClex8 DI O 4 Y I PCle x8 II Figure 4 LEDs LED s A B and C are visible from outside on the rear of the server All the other LEDs are only visible if the cover of the server has been opened If the server has been powered off power plugs must be disconn
23. tery or a battery type recommended by the manufacturer CR2450 Do not throw lithium batteries into the trash can It must be disposed of in accordance with local regulations concerning special waste Make sure that you insert the battery the right way round The plus pole must be on the top P oom Figure 10 Replacing the lithium battery gt Press the locking spring into direction of the arrow 1 so that the lithium battery jumps out of its socket Remove the battery 2 gt Insert a new lithium battery of the same type into the socket 3 and 4 D2509 TX200 S4 Technical Manual 29 Abbreviations The technical terms and abbreviations given below represent only a selection of the full list of common technical terms and abbreviations Not all technical terms and abbreviations listed here are valid for the described system board ACPI Advanced Configuration and Power Interface ASR amp R Automatic Server Recovery and Restart ATA Advanced Technology Attachment BBU Battery Backup Unit BIOS Basic Input Output System BMC Baseboard Management Controller CMOS Complementary Metal Oxide Semiconductor COM COMmunication port CPU Central Processing Unit DDR Double Data Rate DIMM Dual In line Memory Module D2509 TX200 S4 Technical Manual 31 Abbreviations DIP Dual In line Package DMI Desktop Management Interface DRAM Dynamic Random Access Memory
24. used to define whether the password is queried at system startup if the password protection is enabled in BIOS Setup in Security menu the Password field must be set to Enabled on The password query is skipped Passwords are deleted off The password query is effective default setting Write protection for Flash BIOS switch 3 Switch 3 is used to define whether the System BIOS is write protected or not on The System BIOS can neither be written to nor deleted Flash BIOS update from floppy disk is not possible off The System BIOS can be written or deleted Flash BIOS update from floppy disk is possible default setting Write protection for floppy disks switch 4 Switch 4 is used to define whether floppy disks can be written or deleted in the floppy disk drive To write and delete floppy disks the write protection in BIOS Setup must be disabled in menu Security the field Diskette Write must be set to Enabled on The floppy disk drive is write protected off Floppy disks can be read written and deleted default setting 28 Technical Manual D2509 TX200 S4 4 Replacing the lithium battery In order to save the system information permanently a lithium battery is installed to provide the CMOS memory with a current When the charge is too low or the battery is empty a corresponding error message is provided The lithium battery must then be replaced The lithium battery must be replaced with an identical bat
Download Pdf Manuals
Related Search