perforateur 1500w ttb278sds ttb279sds - Free-Instruction
Contents
1. 247 SAFETY AND OPERATING MANUAL Original instructions ROTARY HAMMER 1500W TTB278SDS TTB279SDS TITAN Congratulations on your purchase of a TITAN power tool from Titan Power Tools UK Ltd We want you to continue getting the best performance from it so this handbook includes information on safety handling and care Please retain this handbook in case you need to refer to any of the information in the future Your TITAN power tool comes with a 24 month guarantee so should it develop a fault within this period contact your retailer GUARANTEE This TITAN product carries a guarantee of 24 months If your product develops a fault within this period you should in the first instance contact the retailer where the item was purchased This guarantee specifically excludes losses caused due to Fair wear and tear Misuse or abuse Lack of routine maintenance Failure of consumable items such as batteries Accidental dammage Cosmetic damage Failure to follow manufacturer s guidelines Loss of use of the goods This guarantee does not affect your statutory rights This guarantee is only valid in the UK For any enquiries relating to the guarantee please refer to your retailer CAUTION This is a very powerful Drill When using this drill it is essential that the following rules for use are followed 1 When drilling it is common that the core drill bit jams in the mate2. ONLY FOR TTB279SDS SDS masnory drill bits 6 8 10 12 14 16 18 20mm 8pcs Drill bits coated TI 5 6 8 10 12mm 5pcs Diamond cores 65 80mm 2pcs Chisels U Flat Point 3pcs Fig 3 Fig 4 OPERATIONS INSTRUCTIONS Note Before using the tool read the instruction book carefully INTENDED USE This rotary hammer shall be used for drilling metal or wood or similar materials and for hammer drilling of concrete and masonry and similar materials Other uses for the tool will lead to the damage of the tool and a series of dangers to the operator This tool is intended for DIY home use or occasional professional use 1 INSTALLING THE AUXILIARY HANDLE Fig 1 Loosen the handgrip anti clockwise then slide the handle on the head of the hammer Rotate the handgrip clockwise to clamp the handle and tighten fully Fig 2 Warning For reasons of safety only use the tool when it is fitted with the auxiliary handle making sure the auxiliary handle is sufficiently tightened to stop movement in use 2 INSTALLING THE DEPTH GAUGE Fig 2 Rotate the small knob on the handle anti clockwise Insert the depth gauge through hole in handle to required depth The depth gauge can be used to set a constant depth to hammer Rotate the knob clockwise to clamp the depth gauge and tighten fully 3 INSERTING SDS TOOLS OR CHUCK Fig 3 amp Fig 4 The hammer is equipped with an SDS plus attachment system The chuck
3. area safety a Keep work area clean and well lit Cluttered or dark areas invite accidents b Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes c Keep children and bystanders away while operating a power tool Distractions can cause you to lose control Electrical safety a Power tool plugs must match the outlet Never modify the plug in any way Do not use any adapter plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce risk of electric shock b Avoid body contact with earthed or grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded c Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock d Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of electric shock e When operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock f If operating a power tool in a damp location is unavoidable use a residual current device RCD protected supply Use of an RCD reduces the ris
4. to be performed Use of the power tool for operations different from those intended could result in a hazardous situation Service a Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained ROTARY HAMMER 1500W TTB278SDS TTB279SDS ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR HAMMER 1 Always wear ear protectors Exposure to noise can cause hearing loss 2 Always use auxiliary handles supplied with the tool Loss of control can cause personal injury 3 Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord Cutting accessory contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock 4 Safety boots are recommended at all times especially when using the chisel actions 5 Proper safety gloves are also recommended 6 When using chisel a dust mask is necessary because of the cement dust created by the action 7 Always check walls and ceiling to avoid hidden power cables and pipes A metal detector can be obtained from any good DIY store for this purpose 8 Use clamps or a vice to hold workpiece if possible 9 This heavy duty high torque machine should not be used while standing on a ladder 10 Before starting to work always check that the chisel or drill bit is properl
5. IBRATION The European Physical Agents Vibration Directive has been brought in to help reduce hand arm vibration syndrome injuries to power tool users The directive requires power tool manufacturers and suppliers to provide indicative vibration test results to enable users to make informed decisions as to the period of time a power tool can be used safely on a daily basis and the choice of tool Further Advice can be found at www hse gov uk For TTB278SDS Vibration total values triax vector sum description determined according to EN 60745 For hammer drilling into concrete 18 067m s 1 5m s For chiselling 16 878m s K 1 5m s For TTB279SDS Vibration total values triax vector sum determined according to EN 60745 For hammer drilling into concrete a 18 067m s2 K 1 5m s For chiselling a cheq 16 878m s K 1 5m s The declared vibration emission value should be used as a minimum level and should be used with the current guidance on vibration Calculating the actual period of the actual period off use can be difficult and the HSE website has further information The declared vibration emission has been measured in accordance with a standardised test stated above and may be used to compare one tool with another The declared vibration emission value may also be used in a preliminary assessment of exposure Warning The vibrat
6. SDS tools have slots in the shank These locate with tabs in the rotary hammer Hold the rotary hammer with one hand facing away from you Grip and pull back the fastening sleeve and insert the chuck SDS tool Push inwards until a resistance is felt Once you are satisfied it has seated release the black fastening sleeve This should lock the chuck into position ROTARY HAMMER 1500W TTB278SDS TTB279SDS 4 REMOVE SDS TOOLS OR CHUCK To remove the SDS tools chuck pull back fastening sleeve hold and remove tool 5 USING THE KEY CHUCK Fig 5 The hammer comes supplied with a drill chuck with a SDS adaptor This drill chuck is used for drilling on wood or steel Do not use this drill chuck for hammer drilling or chiselling on any work piece Fit the drill chuck to the SDS chuck holder as section 3 Turning the chuck key at the three positions will loose or tighten the chuck Turning the key anti clockwise to loosen the chuck Insert the drill bit into the chuck holder then turning the key clockwise firmly to tighten the drill bit Warning DO NOT use the key chuck for hammer drilling action or chiselling action Remove the key from the chuck befroe starting the tool 6 VARIABLE SPEED SWITCH Fig 6 The speed increases as you turn the switch towards the higher number and decreases on the lower number 7 HAMMER DRILL FUNCTION Fig 7 amp Fig 8 Adjust the dial selector to position a T to provide rotation of the chuck Adj
7. TB279SDS 0 VT 14 15 1 c T E 9 ONLY FOR TTB278SDS ONLY FOR TTB279SDS i 1 FASTENING SLEEVE 2 DEPTH GAUGE 3 DEPTH GAUGE LOCK 4 DIAL SELECTOR WITH LOCK BUTTON 5 GEAR BOX COVER 6 ON OFF SWITCH 7 LEVER SELECTOR 8 MAINS POWER CABLE 9 VARIABLE SPEED SWITCH 10 AUXILIARY HANDLE 11 DUST COVER 12 KEY CHUCK AND ADAPTOR 13 CHUCK KEY 14 SDS DRILL BITS 6 8 10 12 14mm 15 SDS CHISEL BITS FLAT POINT 16 DRILL BITS COATED TI 5 6 8 10 12mm 17 SDS DRILL BITS 6 8 10 12 14 16 18 20mm 18 SDS CHISEL BITS U FLAT POINT 19 DIAMOND CORES 65 80mm TECHNICAL DATA Voltage 230 240V 50Hz Input power 1500W No load speed 200 750 min Impact rate 800 3000bpm Drilling capacity Masonry 32mm Steel 13mm Wood 40mm Chuck type SDS plus Protection class Machine weight 6 1kg ROTARY HAMMER 1500W TTB278SDS TTB279SDS NOISE DATA A weighted sound pressure 93 8dB A KpA 3dB A A weighted sound power 104 8dB A KwA 3dB A Wear ear protection when sound pressure is over 80dB ACCESSORIES Auxiliary handle 1 Metal depth gauge 1pc Dust cap 1pc Keyed chuck with SDS adaptor amp chuck key 1pc ONLY FOR TTB278SDS SDS masnory drill bits 6 8 10 12 14mm 5 Chisels Flat Point 2pcs
8. ion emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used dependant on the following examples and other variations on how the tool is used How the tool is used and the materials being drilled The tool being in good condition and well maintained The use the correct accessory for the tool and ensuring it is sharp and in good condition The tightness of the grip on the handles And the tool is being used as intended by its design and these instructions ROTARY HAMMER 1500W TTB278SDS TTB279SDS This tool may cause hand arm vibration syndrome if its use is not adequately managed Warning identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time Note The use of other tools will reduce the users total working period on this tool Helping to minimise your vibration exposure risk ALWAYS use sharp drill bits or chisels Maintain this tool in accordance with these instructions and keep well lubricated where appropriate Avoid using tools in temperatures of 10 C or less Plan your work schedule to spread any high vibration tool use across a number of days Health Surveillance All employees should be part of an employer s health su
9. k of electric shock Personal safety a Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool while you are tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury b Use personal protective equipment Always wear eye protection Protective equipment such as dust mask non skid safety shoes hard hat or hearing protection used for appropriate conditions will reduce personal injuries c Prevent unintentional starting Ensure the switch is in the off position before connecting to power source and or battery pack picking up or carrying the tool Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents d Remove any adjusting key or wrench before turning the power tool on A wrench or a key left attached to a rotating part of the power tool may result in personal injury e Do not overreach Keep proper footing and balance at all times This enables better control of the power tool in unexpected situations f Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from moving parts Loose clothes jewellery or long hair can be caught in moving parts g If devices are provided for the connection of dust extraction and collection facilities ensure these are connected and properly used U
10. rial being drilled This will result in the drill trying to rotate around the drill bit and potentially come out of your grip This SDS Drill has a safety clutch mechanism This safety clutch mechanism will be activated and stop the drive to the drill bit BUT only if you resist the initial forces caused by the jamming by securely holding the drill with both hands As this is a very powerful drill these forces are significant 2 ALWAYS ensure that the front handle is firmly affixed and secure 3 The Front and rear handle must be firmly held to resist any movement of the drill when the core drill or drill bit becomes jammed 4 ALWAYS use this drill when standing on a firm and secure platform or the ground DO NOT USE ON LADDERS OR STEPS 5 NEVER Start the Drill with the core or drill jammed in position 6 DO NOT stretch to hold the drill Do not drill above shoulder height or below Knee height as the drill cannot be securely held ROTARY HAMMER 1500W TTB278SDS TTB279SDS GENERAL SAFETY INSTRUCTIONS WARNING Read all safety warnings designated by the symbol VY and all instructions WARNING Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric shock fire and or serious injury Save all warnings and instructions for future reference The term power tool in the warnings refers to your mains operated corded power tool or battery operated cordless power tool Work
11. rveillance scheme to help identity any vibration related diseases at an early stage prevent disease progression and help employees stay in work Double insulation ci The tool is double insulated This means that all the external metal parts are electrically insulated from the mains power supply This is done by placing insulation barriers between the electrical and mechanical components making it unnecessary for the tool to be earthed Important note Be sure the supply is the same as the voltage given on the rating plate The tool is fitted with a two core cable and plug Remove the mains plug from socket before carrying out any adjustment or servicing Torque limiter There is a clutch in your hammer drill The torque limiter will actuate when a certain torque level is reached The motor will disengage from the output shaft When this happens the bit will stop turning As soon as the torque limiter actuates release the trigger and remove the tool and bit immediately This will help prevent premature wear of the tool o e o Read the manual Warning Waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check with your Local Authority or retailer for recycling advice Wear ear protection Wear dust mask 900 ptm Wear eye protection Double insulation Iu Conformity to CE directive oN ROTARY HAMMER 1500W TTB278SDS T
12. s and chisels The performance of the drill is dependant on the quality of the bits used Reduce the pressure on the drill bit when it is about to break through This will prevent the drill from jamming When drilling a large hole first drill a pilot hole using a smaller drill bit Always apply pressure to your drill bit in a straight line and if possible at right angles to the workpiece When drilling holes into walls floors etc always make sure that there are no live electrical wires or pipe work in the path of the bit Always operate your drill using both the handle and the front handle Never change the operating mode whilst the drill is running When using the product in the hammer only mode or when chiselling masonry make sure that you wear safety glasses and protective gloves Do not apply excessive pressure to the tool when chiselling Excessive force does not speed up the work MAINTENANCE Remove the plug from the socket before carrying out any adjustment servicing or maintenance Your power tool requires no additional lubrication or maintenance There are no user serviceable parts in your power tool Never use water or chemical cleaners to clean your power tool Wipe clean with a dry cloth Always store your power tool in a dry place Keep the motor ventilation slots clean Keep all working controls free of dust Occasionally you may see sparks through the ventilation slots This is normal If the supply cord i
13. s damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste Please recycle where mmm facilities exist Check with your Local Authority or retailer for recycling advice For further information visit www recyclemore co uk UK PLUG REPLACEMENT The fuse in the main plug of your power tool should always be replaced with one of identical rating Check the voltage given on your power tool matches the supply voltage The power tool is supplied with a fitted plug however if you should need to fit a new plug follows the instruction below IMPORTANT The wire in the mains lead are coloured in accordance with the following code Blue Neutral Brown Live The wire that is coloured blue must be connected to the terminal that is marked with the letter The wire that is coloured brown must be connected to the terminal that is marked with the letter L A 13AMP BS1363 or BS1363 A plug must be used and a 13 AMP fuse must be fitted T N NEUTRAL BROWN L LIVE OUTER SLEEVE CABLE GRIP ROTARY HAMMER 1500W TTB278SDS TTB279SDS TITAN Declaration of Conformity We Importer Titan Power Tools UK Ltd Trade house Mead Avenue BA22 8RT Declare that the product Designation ROTARY HAMMER 1500W Model TTB278SDS amp TTB279SDS Complies with
14. se of dust collection can reduce dust related hazards Power tool use and care a Do not force the power tool Use the correct power tool for your application The correct power tool will do the job better and safer at the rate for which it was designed b Do not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired c Disconnect the plug from the power source and or the battery pack from the power tool before making any adjustments changing accessories or storing power tools Such preventive safety measures reduce the risk of starting the power tool accidentally d Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users e Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tool s operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools f Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control g the power tool accessories and tool bits etc in accordance with these instructions taking into account the working conditions and the work
15. the following Directives 2004 108 EC Electromagnetic Compatibility Directive 2006 42 EC Machinery Directive 2006 95 EC Low Voltage Directive 2002 95 EC Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment 2002 96 EC and 2003 108 EC Waste Electrical and Electronic Equipment WEEE Standards and technical specifications referred to EN 60745 1 2009 EN 60745 2 6 2003 A1 2006 A1 1 2007 A2 2009 A12 2009 EN 55014 1 2006 A1 2009 EN 55014 2 1997 A1 2001 A2 2008 EN 61000 3 2 2006 EN 61000 3 3 2008 Authorised Signatory and technical file holder Date 07 07 2010 Signature Pekhan Name title Peter Harries Quality Manager Titan Power Tools UK Ltd Trade House Mead Avenue BA22 8RT
16. ust the lever selector to position a T to provide the hammer action You are now set up for hammer drilling into masonry or concrete etc Note Press the lock button a before adjusting the dial selector If the selector switch can t go into the required position switch on your hammer a little then adjust the selector again 8 DRILLING FUNCTION Adjust the dial selector to position T to provide rotation of the chuck Adjust the lever selector to position to stop the hammer action You are now set up for drilling into wood or metal 9 HAMMER FUNCTION Adjust the dial selector to position T to stop rotation of the chuck Adjust the lever selector to position 2 T to provide the hammer action You are now set up for chisel work using hammer action 10 DUST COVER Fig 9 The dust cover shall be used to protect the user and the tool from dust in particular when drilling into the ceiling Slide the dust cover on the drilling accessory down to the chuck 11 LUBRICATION OF THE TOOL Fig 10 Always check there is sufficient grease in the grease box before usage Check every 5 hrs of use Open the grease box lid at the top of the hammer by removing the four Screws with a screwdriver Then top up the grease box capacity 20gms max using general purpose lithium based grease ROTARY HAMMER 1500W TTB278SDS TTB279SDS WORKING HINTS Always use sharp good quality drill bit
17. y locked in the chuck 11 Hold the tool firmly with both hands while working and provide for secure footing The tool is more securely guided with both hands 12 Wait until the machine has come to a standstill before placing it down The insertion tool can be come caught and lead to loss of control over the machine 13 The screw of machine can come loose easily and causing a breakdown or accident Check tightness of screw carefully before operation 14 Do not touch the bit or parts close to the bit immediately after operation They may be extremely hot and could burn your skin 15 In cold weather or when the tool has not been used for a long time Let the tool warm up for a while by operating it under no load This will loosen up the lubrication 16 Some material contains chemicals which may be toxic Take caution to prevent dust inhalation and skin contact Follow material supplier safety data HEALTH ADVICE WARNING When drilling sanding sawing or grinding dust particles will be produced In some instances depending on the materials you are working with this dust can be particularly harmful to you e g lead from old gloss paint You are advised to consider the risks associated with the materials you are working with and to reduce the risk of exposure You should Work in a well ventilated area Work with approved safety equipment such as those dust masks that are specially designed to filter microscopic particles V
Download Pdf Manuals
Related Search