Home

assembly

1. SECTION 1 ASSEMBLY STEP 4 PARTS AND TOOLS REQUIRED TO COMPLETE STEP FROM STEP 3 M4 ALLEN WRENCH 2 SUPPLIED H MATTRESS SUPPORT x 1 M6 x15 mm BOLT x 4 PART 21149 ATTACH THE MATTRESS SUPPORT PART H INALL CORNERS USING 1 M6x15 mm BOLT PART IN EACH CORNER TIGHTEN WITH THE 4 ALLEN WRENCH THE A WARNINGS PRINTED ON THE POUCH ATTACHED UP 21 FTIT 4 THE MATTRESS SUPPORT MUST FACE UP THE SPRINGS MUST FACE UP THIS CRIB HAS 3 ADJUSTMENT POSITIONS USE THE HIGHEST ONLY FOR NEW BORNS MOVE THE MATTRESS DOWN AS THE CHILD GROWS A WARNING FALL HAZARD WHEN CHILD IS ABLE TO PULL TO A STANDING POSITION SET MATTRESS TO LOWEST POSITION AND REMOVE BUMPER PADS LARGE TOVS AND OTHER OBJECTS THAT COULD SERVE AS STEPS FOR CLIMBING OUT CAUTION WHEN ATTACHING THE MATTRESS SUPPORT IN THE LOWEST POSITION ONLY USE THE HOLE INDICATED THE LOWER HOLE MUST NOT BE USED N WARNINGS ON POUCH MUST FACE UP SECTION 1 CRIB ASSEMBLY STEP 5 PARTS AND TOOLS REQU
2. FROM STEP 1 J M6 x 80 mm BOLT x 4 ATTACH 1 BACK RAIL PART E TO THE ASSEMBLIES FROM STEP 1 USING 4 M6x80 mm BOLTS PART J AND 4 BARREL NUTS PART TIGHTEN WITH THE 4 ALLEN WRENCH USE THE FLAT HEAD SCREWDRIVER TO HOLD THE BARREL NUT IN THE PROPER ALIGNMENT SECTION 1 CRIB ASSEMBLY STEP 3 PARTS AND TOOLS REQUIRED TO COMPLETE STEP O 4 30 mm METAL PIN x 4 2 2 1 1 M6 x 60 mm BOLT x 2 PART 21145 FROM STEP 2 M4 ALLEN WRENCH SUPPLIED ATTACH 1 STABILIZER BAR PART G TO THE ASSEMBLY FROM STEP 2 USING 4 4 30 METAL PINS PART P AND 2 M6x60 mm BOLTS PART K TIGHTEN WITH THE M4 ALLEN WRENCH NOTE DO NOT TIGHTEN AT THIS TIME BOTH ENDS
3. M4 ALLEN WRENCH FINISHED CRIB SUPPLIED REMOVE THE FRONT RAIL INSTALLED IN STEP 5 OF SECTION 1 CRIB ASSEMBLY SECTION 2 TODDLER BED CONVERSION STEP 2 A WARNING SEE PAGE 3 FOR TODDLER BED WARNINGS THE MATTRESS SUPPORT MUST BE IN THE LOWEST POSITION STORE ALL HARDWARE SAFELY READ ALL WARNINGS ON PAGE 3 AS SHOWN USE AS DAY BED OR LOVE SEAT SOFA DO NOT USE WITHOUT STABILIZER BAR INSTALLED N STABILIZER BAR MUST BE USED WHEN CONVERTED TOA TODDLER BED
4. A TODDLER BED GUARDRAIL IS AVAILABLE FOR THIS CRIB PLEASE SEE YOUR CRIB RETAILER VISIT WWW DELTACHILDRENSPRODUCTS COM OR CONTACT DELTA CONSUMER CARE FOR MORE INFORMATION THIS CRIB USES DELTA STYLE GUARDRAIL SECTION 3 FULL SIZE BED CONVERSION STEP 1 PARTS AND TOOLS REQUIRED COMPLETE STEP M4 ALLEN WRENCH SUPPLIED YOU HAVE THE OPTION TO CONVERT THE CRIB TO A FULL SIZE BED SIMPLY FOLLOW STEPS IN REVERSE ORDER TO DISASSEMBLE THE CRIB THEN REMOVE THE REAR LEGS FROM THE LEFT CRIB END AND RIGHT CRIB END WITH THE M4 ALLEN WRENCH AS SHOWN STORE ALL PARTS AND HARDWARE INA SAFE PLACE SECTION 3 FULL SIZE BED CONVERSION 6 15 mm BOLT x 4 PARTS AND TOOLS REQUIRED TO COMPLETE STEP
5. FROM SECTION 3 STEP 1 M4 ALLEN WRENCH SUPPLIED ATTACH BED FRAME TO THE HEADBOARD FROM SECTION 3 STEP 1 USING 4 M6x15mm BOLTS PART M FOLLOW ALL INSTRUCTIONSSUPPLIED WITH THE BEDFRAME NOTE BED FRAME SYSTEM IS NOT INCLUDED SEE YOU FURNITURE OR MATTRESS RETAILER CONTACT DELTA CHILDREN S PRODUCTS FOR INFORMATION OR WITH QUESTIONS Children s Products Customer Service Web Site www deltachildrensproducts com Delta Children s Products 114 West 26th Street New 10001 Tele 212 645 9033 Warranty This Delta Crib is warranted to be free from defects for a period of 1 vear from the date of purchase under normal use This warrantv extends oniv to the original retail purchaser and is valid when supplied with proof of purchase or if received as a gift when the registration is on file with Delta To register vour product for important safetv alerts and updates to vour product please visit http deltaenterprise com register asp Please do not return this item to the store before contacting us about missing parts or with anv questions To report a problem please log on to www deltachildrensproducts com and click the Customer Service log on to www deltaenterprise com customer_service asp contact us bv phone at 212 645 9033 In the eve
6. Stabilizer bar must be used when converted to a toddler bed NOTES ON ASSEMBLY During the assembly process whenever using screws or bolts check each by placing the screw bolt on the diagram of the item which is drawn actual size and design Be sure to use the proper size and shape specified in the instructions To assemble this unit you may be required to place the unit on it s side and face It is strongly recommended that assembly is done on a soft non abrasive surface to avoid damaging the finish NOTES ON USE Keep children and others safe by following these simple rules Do not allow any child to play on furniture Do not allow climbing on any piece of furniture Do not allow hanging from any piece of furniture Always monitor your child s activity when in the nursery NOTES ON CARE AND MAINTENANCE Do not scratch or chip the finish Inspect the product periodically contact delta children s products for replacement parts or questions Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a damp cold basement These extremes can cause a loss of structural integrity To preserve the luster of the high quality finish on your product it is recommended to place a doily or felt pad under any items you place on the finish Clean with a damp cloth then a dry cloth to preserve the original luster and beauty of this fine finish Do not use abrasive chemicals Do n
7. ARN DO USE THIS CRIB IF THE ENCLOSED OR ATTACHED INSTRUC TIONS CANNOT BE STRICTLY ADHERED TO DO NOT USE THIS CRIB IF THE CHILD IS ABLE TO CLIMB OUT UNAIDED OR IS TALLER THAN 90 CM DO NOT PLACE CORDS STRAPS OR SIMILAR ITEMS THAT COULD BECOME WOUND AROUND THE CHILD S NECK IN OR NEAR THIS CRIB ENSURE THAT THE SIDES ARE PROPERLY LATCHED OR LOCKED IN PLACE WHEN THE CRIB IS OCCUPIED THE MATTRESS USED WITH THIS CRIB SHOULD NOT BE MORE THAN 15 CM THICK AND SHOULD BE OF SUCH LENGTH AND WIDTH THAT THE GAP BETWEEN THE MATTRESS AND THE SIDES OF THE CRIB IS NOT MORE THAN 3 CM WHEN THE MATTRESS IS PUSHED INTO THE CORNER OF THE CRIB TODDLER BED WARNING ENTRAPMENT STRANGULATION HAZARD INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT AND STRANGULATION Failure to follow these warnings and the assembly instructions could result in serious injury or death Never use bed with children under 15 months Never place bed near windows where cords from blinds or drapes may strangle a child Do not place items with a string cord or ribbon around child s neck such as hood strings or pacifier cords not suspend strings over a toddler bed for any reason users maximum weight shall not be greater than 50 Ib 22 7kg mattress intended for use on the bed shall be a full size crib mattress having minimum dimensions of 51 5 8 in 1310 mm in length 27 1 4 in 690 mm in width and 4 in 100 mm in thickness
8. BE AT LEAST 27 1 4 INCHES BY 51 5 8 INCHES WITH A THICKNESS NOT EXCEEDING 6 INCHES AWARNING CRIB Infants can suffocate on soft bedding Never add a pillow or comforter Never place additional padding under an infant Failure to follow these warnings and the assembly instructions could result in serious injury or death To reduce the risk of SIDS pediatricians recommend healthy infants be placed on their backs to sleep unless otherwise advised by your physician ADULT ASSEMBLY REQUIRED DUE TO SMALL PARTS Read all instructions before assembling crib KEEP INSTRUCTIONS FOR FUTURE USE Strangulation Hazard STRINGS CAN CAUSE STRANGULATION Do not place items with a string around a child s neck such as hood strings or pacifier cords Do not suspend strings over a crib or attach strings to toys Strangulation Hazard To help prevent strangulation tighten all fasteners A child can trap parts of the body or clothing on loose fasteners Strangulation Hazard Do not place crib near window where cords from blinds or drapes may strangle a child Fall Hazard When child is able to pull to a standing position set mattress to lowest position and remove bumper pads large toys and other objects that could serve as steps for climbing out This crib has an adjustable mattress support For the convenience of the parent when the baby is very small the mattress support may be used in the highest position Important with the mattress support and mattress
9. IRED TO COMPLETE STEP FRONT RAIL x 1 PART 21146 N BARREL NUT x 4 4 M4 ALLEN WRENCH SUPPLIED O P 4 30 mm METAL PIN x 2 J M6 x 80 mm BOLT x 4 ATTACH THE FRONT RAIL PART F TO THE ASSEMBLY FROM STEP 4 USING 2 4 30 mm METAL PINS PART P 4 80 BOLTS PART J AND 4 BARREL NUTS PART TIGHTEN ALL BOLTS WITH THE M4 ALLEN WRENCH USE THE FLAT HEAD SCREWDRIVER TO HOLD THE BARREL NUT IN THE PROPER ALIGNMENT SECTION 1 CRIB ASSEMBLV STEP 6 PARTS AND TOOLS REQUIRED TO COMPLETE STEP ASSEMBLY INSTRUCTION OOKLET M4 ALLEN WRENCH SUPPLIED STORE THE ASSEMBLY INSTRUCTION BOOKLET AND THE ALLEN WRENCH IN THE POUCH ATTACHED TO THE MATTRESS SUPPORT STORE ALL UNUSED HARDWARE SAFELY A WARNING SEE PAGE 2 FOR INFORMATION SECTION 2 TODDLER BED CONVERSION STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP
10. READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE KEEP INSTRUCTIONS FOR FUTURE USE A ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS DURING ASSEMBLV KEEP OUT OF REACH OF 2 1 CHILDREN UNTIL ASSEMBLY IS COMPLETE Safetv Standards wwwjpma org Customer Service Web Site www deltachildrensproducts com Delta Children s Products TM 114 West 26th Street New 10001 Children s Products Tele 212 645 9033 STVLE No 7025 COLOR REV FTV THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE If vou have anv questions or missing parts contact us DO NOT return product parts to the store from where it was purchased before contacting Delta Children s Products Customer Service Make sure that all preassemble parts are tight The appearance of vour product mav be different from that pictured in this booklet To register vour product for important safetv alerts and updates to vour product please visit http deltaenterprise com register asp SEPTEMBER 7 2010 7025 R4 62010 DELTA ENTERPRISE CORP ANY MATTRESS USED IN THIS CRIB MUST
11. in the highest position be absolutely sure that the top of the front crib side is at least 3 inches higher then the top surface of the mattress If it is not lower the mattress support and the mattress to the next highest position Fall Hazard Stop using crib when child begins to climb out or reaches a height of 35in 90cm whichever occurs first The child should be placed in a youth or regular bed Check this product for damaged hardware loose joints missing parts or sharp edges before and after assembly and frequently during use Do not use crib if any parts are missing damaged or broken Contact Delta Children s Products for replacement parts and instructional literature if needed Do not substitute parts Follow warnings on all products in a crib not use a water mattress with this crib If refinishing use a non toxic finish specified for children s products use plastic shipping bags or other plastic film as mattress covers because thev cause suffocation Infants can suffocate gaps between crib sides and a mattress that is too small Ensure a safe environment for the child by checking regularly before placing the child in the crib that component is and securelv in place avoid head injury do not allow child to play underneath the crib add accessorv such as bassinet or changing table that extends over the sleeping area AW
12. nt that vou need to contact our customer service department please have the Stvle Number and Lot Number available Use the space below to make note of those numbers Thev can be found on the label on the Crib End bottom rail Style No Lot No Pack Date Date of Purchase you should also keep your receipt
13. ot spray cleaners directly onto furniture Lift slightly when moving on carpeting to prevent leg breakage Use of a vaporizer near furniture will cause wood to swell and finish to peel PARTS MAKE SURE THAT ALL PRE ASSEMBLED PARTS ARE TIGHT LEFT REAR LEG x 1 PART 21142 D RIGHT REAR LEG x 1 A LEFT CRIB END x 1 B RIGHT CRIB END x 1 PART 21143 PART 21140 PART 21141 G STABILIZER BAR x 1 PART 21145 BACK RAIL 1 PART 21144 H MATTRESS SUPPORT x 1 PART 21149 POUCH ATTACHED TO MATTRESS SUPPORT KEEP INSTRUCTIONS AND ANY EXTRA HARDWARE AND TOOLS IN THIS POUCH AFTER ASSEMBLY F FRONT RAIL x 1 WARNINGS RELATED TO THE SAFE USE OF PART 21146 THIS CRIB ARE PRINTED ON THE POUCH WARNING LABEL 4 PARTS HARDWARE KIT PART 21147 J M6 x 80 mm BOLT x 8 7 M6 x 60 mm BOLT x 2 L M6x 55 mm BOLT x 4 mp 2 M6 x15 BOLT x 4 N BARREL NUT x 12 ea P b4x30 mm METAL PIN x 6 gt Flat Head Sc
14. rewdriver M4 ALLEN WRENCH SUPPLIED not supplied SECTION 1 CRIB ASSEMBLY STEP 1 PARTS AND TOOLS REQUIRED COMPLETE STEP LEFT REAR LEG x 1 PART 21142 D L M6 x 55 mm BOLT x 4 PRODUCT LABE A LEFT CRIB END x 1 RIGHT REAR LEG 1 M4 ALLEN WRENCH RIGHT CRIB ENDx1 PART 21143 SUPPLIED PART 21141 ATTACH 1 LEFT CRIB END PART A 1 LEFT REAR LEG PART USING 2 M6x55mm BOLTS PART L AND 2 BARREL NUTS PART N TIGHTEN WITH THE M4 ALLEN WRENCH USE THE FLAT HEAD SCREWDRIVER TO HOLD THE BARREL NUT IN THE PROPER ALIGNMENT REPEAT ON THE RIGHT CRIB END PART B NOTE AFTER ASSEMBLY THE STEPPED HOLES IN BOTH POSTS ARE ON THE SAME SIDE en BAN LEFT CRIB END SECTION 1 CRIB ASSEMBLY STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP BACK RAIL x 1 PART 21144 M4 ALLEN WRENCH SUPPLIED si N BARREL NUT x 4

assembly

Contents

Download Pdf Manuals

Related Search

Related Contents