AQUAVOLT 3500 取扱説明書
Contents
1. Subtle lighting with light intensity dial which can be adjusted by 2 increments available Various information displayed on back light installed LCD panel makes visual confirmation easy Overpressure relief valve equipped With lithium ion batteries discharging or refreshing not necessary Batteries are removable so quickly changing to a second set of batteries allows second dive while first battery set recharges The battery is removable so it is available to take on a plane When the battery charge becomes low it automatically switches the light to low power mode to save enough light source for divers to rise to the surface safely In hot temperatures it automatically switches the light to low power mode to prevent heat generation Remote controller ready Option Lamp Type Color Temperature Light Output Battery Type Charge Time Continuous Burn Times Usability in Air Beam Angle Depth Rating Lamp Life Materials Dimensions Weight Included Items 1 2W high intensity white LED diodes x 24 6 500K 7 000K 3 900 lumen maximum Li Ion 180 min maximum 60 min max output 20 min 20 low output Not useable Approx 115 degrees 100 meters 300 feet Approx 35 000 hours Corrosion resistant aluminum alloy Diameter 65 5 mm x 152 6 mm 498 grams In air with battery 295 grams Underwater with battery Rechargable Li Ion Battery Multi volt AC Cable Charging Cradle YS Adapter Hand Grip B2. and prevent water leakage 1 Using the included O ring removal tool remove the light body rear O ring that the rear body fits over Never use metal or sharp objects to remove the O ring such as scissors needles box cutter blades etc 2 As you remove each O ring place on a clean surface in the order removed 3 To prevent wear and damage to the O ring lightly coat it with a thin film of the included O ring grease Be careful that no hair lint dust sand etc adheres to the greased O ring or water will leak If there are any such contaminants on the O ring wash off first and then grease up Also don t put too much grease on the O ring or it will attract more contaminants possibly causing water leakage Just a thin film spread with your fingertips is fine Check the O ring surface for cracks or cuts and always replace with a new O ring if you see any such damage Check the groove where the O ring seats and the water sealing O ring contact surface for sand hair dirt etc and wipe clean as necessary using a cotton tipped swab for example Also when inspecting the O ring groove and contact surface carefully check for scratches or cracks which will cause water leakage Do not use product if you find such damage Once you have checked above points install the correct lightly greased O ring onto the Battery Box Lid groove making sure it is uniform with no twists or bulges Always perform this O
3. ring O ring contact groove amp contact surface inspection and O ring grease up every time you open the light Recommendation for Overhaul Regular overhaul is recommended once every 1 2 years regardless of the frequency of use of the product Waterproof O rings that cannot be exchanged by customers are used inside of the product Please ask our customer service for overhaul after a certain period of time to exchange and maintain these to prevent accidents and extend the life of the product 25 Pre diving Check Leakage check is recommended before using the product Submerge the product by horizontally lowering in a tub or bowl filled with water Take out of the water at 3 second 30 second and 3 minute intervals open the rear case and make sure that there is no sign of leakage inside the body After use and storage After use in salt water before opening rear cap loosen arm fixing screw and soak in fresh water for 10 20 minutes While in the water manipulate and rotate the Power Light Output Adjustment Dial and arm fixing screw to work out salt deposits O HINT Using salt damage inhibitor SALT AWAY included in FIX maintenance kit sold separately is even more effective body After use in salt water if salt deposits are allowed to remain and dry in small crystals will wear crack and damage rubber O rings or compromise O ring seal gaps salt crystals will form which will not subsequently di
4. FLYIAP IF RIVES SOO FIX AQUAVOLT 3500 Mines PRODUCT MANUAL Jisheye CONTENTS lt Introduction gt For Safety 17 Product Characteristics Specifications PUNA AAA 19 Name of Parts twee 90 O Display on the LCD Panel gt nennen nen nn nn 20 lt Use Method Howto Operate On mm no mm Hi mi mm 22 Installation of YS adapter ttn mm mm mm mm min min m 22 Disconnecting the Battery 23 Charging Battery sa 24 lt Maintenance gt 0 ring Check osa 25 O Recommendation for Overhaul h th nh nh mm hi n 25 Pre diving Check Css 26 O After use and storage Css 26 O Spare O ring diagram eee eee eee 27 Options AAA 28 O Warranty Conditions Oh mm non mm mm non mon H min n Hi H 29 Warranty Card rara 39 About this product manual Contents of this Manual subject to change without notice If this Manual has errors omissions mistakes or unclear content please contact Fisheye or your local supplier for clarification This Manual may not be copied transmitted or otherwise used in whole or part for any reason except personal use 16 INTRODUCTION For Safety Thank you for purchasing the Fisheye FIX AQUAVOLT3500 To ensure proper use please read and understand this Manual fully and keep in convenient place for future reference Improper use of this product may cause un repairable damage or water leakage Use this product in accordance with this Manual and always perform indicated pre dive chec
5. attery Protect Cover x2 O ring removal tool Spare O ring set O ring Grease User Manual Warranty Card printed on back page 19 Name of Parts Be Rear Body Front Body Optical Fiber Connector for optional Remote Controller el co _ Power Light Output Adjustment Button LCD Panel I Overpressure relief valve han Light Output Adjustment Dial Display on the LCD Panel Lighting display Inside temperature display ze 100 25C ull 27 Remaining battery charge display M Lighting display Current irradiation lighting is displayed in 2 increments M Inside temperature display Current inside temperature is displayed in 1 C increments M Remaining battery charge display Current remaining battery charge is displayed in 5 level bars i M Remaining lighting time display Current remaining lighting time is displayed in second increments 7 i A Remaining lighting time display on the LCD panel Remaining lighting time displayed on the LCD panel is the theoretical value calculated by remaining battery charge and irradiation lighting Please note that there may be a difference between this value and the actual lighting time depending on the battery condition or usage environments such as surrounding water temperature Safety mode refer to page 6 automatically engages when the battery voltage becomes lower than a certain level irrespective of the LCD panel display 20 Protec
6. design alter price etc without prior notification 29 Memo 30 MEMO 31 Warranty Information BA Bill Customer Name EP Address EEES Tel Email 9 Warranty Period One year from purchase date AB Purchase Date Product Name En TIGRE An Model Name FIX AQUAVOLT3500 HERB Serial Number Dealer Name AS ARTE A AHL T PSL PARSE hea EDIT RBA AIORA t aE HARESEIIHHIERNDETNDT Ebc ARNO NTE CHALE ARES BE ITMLECN OC MALEWLIAWICREL CES Dealer Fill your company name amp contact information purchase date model name and serial number Customer Copy and Send the above information when returning the housing for services Not valid unless all information provided above Contact your dealer immediately if any information is missing AASI 317 T171 0052 5 29 7 TEL 03 5996 5637 FAX 03 5996 7202 Www fisheye jp com E mail info fisheve ip com CBABOIITITI TZIEESIEHLSHUTTYYITTITRDET 2x 171AZ W A 03 5988 0191 LJ cs fisheye jp com International Distribution amp Service 5 29 7 Minami Nagasaki Toshima ku Tokyo 171 0052 JAPAN Fisheye Co Lid TEL 81 3 5996 5637 FAX 81 3 5996 7202 www fisheye jp com E mail info fisheye In com
7. ds may be released causing safety hazards Do not shine the light into your own or any other person s eyes Vision loss or damage may occur Only use the lithium ion batteries specified for this product Use of other batteries may damage light or cause emission of gas leading to dangerous condition x Do not touch or handle battery battery charger or AC adapter with wet or moist hands to avoid electric shock Always thoroughly dry hands first Do not eat provided O ring or O ring grease This product is for underwater use only Do not turn on the light in air Heat build up may cause injury Rapid thermal change may cause glass lens and parts to break injury may result 1 amp caution This product is designed to withstand depths of 100 meters 330 feet Using this product at greater depths or even shallower depths strong impact shock combined with depth pressure may cause water leakage Use caution to monitor depth and protect product from shock To prevent water leakage and damage first read and understand this Manual thoroughly inspect product before and after use and perform necessary maintenance at appropriate intervals This product is for underwater use only Do not turn on the light in air Heat build up may cause glass lens and parts to break or light body to deform This product can be used above water in air However extended use in air will cause front body to become very hot so use caution whe
8. ks inspections and maintenance Fisheye and its agents are not responsible for any damages including personal physical or material caused by improper use not in accordance with this user manual or when product is repaired modified or disassembled by any unauthorized person or facility When the following marks are shown it means there could be serious consequence Very important information regarding safety is noted which must be fully understood before using this product a DANGER Ignoring this mark and misusing product can likely lead to death or severe injury O WARNING Ignoring this mark and misusing product may possibly lead to death or severe injury a CAUTION Ignoring this mark and misusing product may lead to injury and property damage oancer To prevent electric shock fire and explosion absolutely do not disassemble or modify this product To prevent electric shock fire and explosion absolutely do not disassemble or modify this product For night cave or any other low light diving environments always carry a backup light to help prevent panic or trouble in the event a battery becomes exhausted a lamp burns out or the primary light stops operating etc a WARNING Do not store or leave this product in the presence of infants children or others unable to understand potential dangers of using this product Store out of reach of children Do not store this product with battery installed Gas or liqui
9. n handling Do not place or store the light in areas of extremely high or low temperatures or areas where there is extreme temperature fluctuation Doing so may cause components to degrade causing possibility of water leakage and damage Absolutely do not open rear body or front body in areas with much sand mud lint dust or other contaminants Opening is such areas may cause such contaminants to stick to waterproofing parts damaging watertight integrity leading to water leakage When traveling by aircraft remove main O ring so rear cap does not become difficult to remove due to air pressure change Not doing so may lead to damage when rear body must be forcibly removed If this product emits unusual noise or smell or smoke or appears to have burnt or melted immediately remove batteries and contact your supplier for advice and service Do not expose this product to alcohol benzene thinner or any other organic solvents to prevent deformation of plastic In the event flooding occurs or is suspected immediately turn power OFF stop using and remove battery When opening rear cap water and air pressure may cause the rear cap to fly off with high force so use caution when opening 18 PRODUCT CHARACTERISTICS SPECIFICATIONS With 24 high intensity white LEDs emitting 3500 lumens From center to edge uniform wide beam without waves or hotspots Excellent for digital camera video and general diving applications
10. r from purchase when used in accordance with this User Manual However this Warranty does not cover any losses damage or water intrusion to any other equipment for any reason Please obtain insurance for all your equipment Also this Warranty does not cover any losses resulting from use of product or malfunction of this product including but not limited to travel expenses or unattained profits from inability to use product User shall bear shipping expense to Fisheye s designated repair facility both during and after warranty period During warranty period the following cases are not free of charge Any authorized repairs will be charged at normal rates 1 Damage caused by improper use not in accordance with User Manual 2 When repaired modified or disassembled by an unauthorized person or facility 3 After purchase if damaged during transport if dropped or if subject to strong impact shock 4 If damaged in fire or natural disaster such as earthquake flood lightning etc 5 If stored in area of high temperature or humidity fluctuation or in area with fumes organic solvents or other chemicals 6 When damaged due to operation when covered with sand mud etc 7 When returned for warranty service not accompanied with Warranty Card or if Warranty Card is altered 8 When User Registration Card is not returned within 14 days of purchase Fisheye Co Ltd reserves the right to modify product change specifications change
11. r wet circumstances as it may result in electric shock or damage Perform O ring check for O ring O ring groove and O ring contact surface for contaminants like dust sand etc and grease O ring before assembling the rear cap Be careful not to drop the battery It may result in not only damaging the battery but also personal injury etc J ge AA a Q HINT Battery can be loaded from either side 4 Q CAUTION Please put the battery protection cap to prevent any short circuit while keeping the battery autside 23 Charging Battery insert the plug into a power outlet The indicator lamp on the right side will become red become green The lamp on the right side will flash depending on the recharge level be green Recharging time about 3 hours maximum Take the battery out of the light Connect the AC adapter to the recharging cradle and Set the battery in the cradle The ind icator lamp will When recharging is complete all the indicator lamps will Remove the battery from the cradle Q DANGER 0 WARNING caution Do not charge on paper carpet or anything potentially flammable as battery and charger may become hot during use Do not charge with coiled cables as heat build up may result in fire Do not handle charging work with wet hands or charge under wet circumstances to avoid electric shock Do not charge batteries that have been flooded or are suspected of having water in
12. ses Light Output Adjustment Dial Turning on the light The light turns on 100 when Power Light Intensity Button is pressed once when it is fully recharged Q HINT G D Fisheye logo will be displayed on the LCD panel for about G ei J 2 seconds after it is turned on Light intensity with Power Light Intensity Button Every time the Power Light Intensity Button is pressed the lighting intensity changes in the order of 80 50 gt 30 100 Light intensity with Light Intensity Dial When the Light Intensity Dial is rotated clockwise the lighting increases by 2 increments When the Light Intensity Dial is rotated anti clockwise the lighting decreases by 2 increments Q HINT When the Light Intensity Dial is rotated about 180 degrees clockwise the lighting status becomes 0 The power does not turn off Turning off the light When the Power Light Intensity Button is pressed and held for about 2 seconds it flashes 3 times and the light turns off Installation of YS Adapter YS adapter fixed screw 1 Attach the YS adapter to the adapter holder insertion direction 2 Tighten up the screw to fix O HINT Direct Base from Ultralight Control Systems optional can also be attached Disconnecting Battery 1 Hold the front body firmly and rotate the rear body anticlockwise with the other hand to remove 2 Tilt the front body and take out the battery I i CAUTION Do not work with wet hands or unde
13. ssolve These salt causing water leakage Always rinse thoroughly with fresh water J After removing from rinse tank rinse with slow flowing running water Do not use high pressure water which will compromise O ring seal and cause water leakage After rinsing wipe off remaining water with a soft dry cloth Do not dry in direct sunlight and do not dry in a dryer or oven or parts may deform or be damaged Then lightly grease up and install O rings and store light Install a new O ring once per year even if the current O ring shows no signs of wear or damage For long term storage avoid areas of extreme high temperature and humidity extreme cold environments and direct sunlight Do not store in areas having chemical fumes organic solvents or strong cleaning agents which can cause deformation and other damage 26 Spare O ring Diagram C O E LL gt O O m x E 20 Inner diameter 49 5mm Light Body Rear Inner diameter 49 5mm 21 OPTIONS FIX AQUAVOLT3500 Li Ion Battery FIX AQUAVOLT3500 Battery Protection Cap FIX AQUAVOLT3500 Remote Controller FIX AQUAVOLT3500 Cradle FIX AQUAVOLT3500 AC Adapter FIX AQUAVOLT3500 Spare O ring set Ultralight Control Systems Direct Base FIX Maintenance Kit FIX Maintenance Kit Light 28 WARRANTY CONDITIONS Fisheye Co Ltd warrants and will repair or replace the product free of charge for one yea
14. tion mode at high temperature When the light head goes over 60 C during use the protection mode engages and reduces the lighting to 20 maximum High temperature mark Hot will be displayed on the LCD panel If the protection mode at high temperature engages turn off the power switch and cool down the light head Also be aware of handling the light head with bare hands as the temperature is high Normal mode is reset when the temperature goes under 55 C A CAUTION This product is designed on the assumption of underwater usage Please be aware that the light emitting part gets hot and may become a cause of burns if it is left on for a long time on land Please be aware that the light emitting part gets hot and the glass may break or the body case may become distorted and lead to leakage if it is left on for a long time on land 00 20 54 A When the remaining battery charge bar reaches one the lighting is reduced to 20 maximum It will remain lit on this condition for 20 minutes and then turn off automatically A CAUTION Please surface immediately after it switches to automatic lighting reduction mode for your safety A Remote control optional fz D A When the optional remote control is connected remote control mark A will be displayed on the LCD panel Please refer to the remote control manual for details 21 USE METHOD How to operate Power Light Output Adjustment Button be
15. trusion Charger is multi volt compatible 100 240V but using on a resort or a cruise ship with in house power generation may cause highly unstable voltage output and result in damage to the charger It is recommended to use a converter with a built in safety circuit Do not charge in temperatures above 30 degrees C 86F or in direct sunlight Charge in a stable position to avoid the plug being disconnected from vibration impact shock or dropping In case of the plug being disconnected during charge do not charge again while the battery is hot Cool it to room temperature before recharging as the temperature sensor may not allow it to take a full charge Do not unplug the AC adapter from the plug socket while the charging plug is still inserted Doing so may cause over discharge and may not allow the battery to take a subsequent charge HINT When the battery is set in the recharging cradle without connecting the AC adapter an estimate of the remaining charge can be gauged by the indicator displayed However do not leave it as it is for a long time The battery may overdischarge and lead to deterioration Displayed in 5 levels by indicator lamp m gt 24 MAINTENANCE O ring Check The FIX AQUAVOLT 3500 is waterproof due to an O ring seal There is one user serviceable O ring A CAUTIO N Regarding O ring care amp maintenance pay attention to the following points to ensure the O ring s waterproof integrity
Download Pdf Manuals
Related Search