Instruction Manual
Contents
1. Part Names CymDal L Rod L Memory Lock E Memory Lock C C Memory Lock B BB Cymbal Mate Upper Felt Washer Protection Sleeve Bottom Felt Washer Stopper Bolt Fig 1 1 Memory Lock D D Boom Arm T bolt A T A Memory Lock A A HC103BW Stopper Bolt Fig 2 2 HOSHINO GAKKI CO LID 461 8717 3 22 http Www tama com fhis manual is current as of ADril 2014 Because we are always WOrking to Improve our DrOducts some features may change without notice 2014 42. 2 1 L T E L T D L T D L 2
3. A T A A 2 T BC T B C B C 3 T D T D D 4 T E L T E E L 5
4. STAR HARDWARE Cymbal Stand HC103BW Instruction Manual Please read through this instruction manual before starting to use Thank you for your purchase of this TAMA STAR HC103BW Boom Stand To ensure safe and efficient use please read through this manual before beginning assembly Store this manual in a convenient place for future reference Assembly 1 Loosen T bolt A and open the tripod to stand the bottom section upright Tighten T bolt A to secure in place Memory lock A can be used for consistent setup in your preferred position 2 Loosen T nuts B and C Insert the middle and upper section then tighten T nuts B and C Memory locks B and C can be used for consistent setup in your preferred position 3 Loosen T nut D and insert the boom arm After setting the angle direction and length of boom arm to your desired preferences tighten T nut D Memory lock D can be used for consistent setup in your preferred position 4 Loosen T nut E to adjust the position of the cymbal L rod To secure the cymbal in place tighten T nut E Memory lock E can be used for consistent setup in your preferred position 5 To attach the cymbal remove the Cymbal Mate and the upper felt washer Position the cymbal so the L rod goes through the center hole with the cymbal coming to rest on the bottom felt washer Place upper felt washer back on top of the cymbal and secure in place using the Cymbal Mate Th
5. e protection sleeve should be placed in cymbal hole to avoid any metal on metal contact between cymbal and stand Fig 1 Straight Cymbal Stand This boom cymbal stand can also be used as a straight cymbal stand if desired Toreconfigure the stand loosen and remove the stopper bolt on the cymbal L rod Next loosen the T nut E and remove the cymbal L rod from the boom arm Then loosen the T nut D and remove the boom arm from the upper section Attach the cymbal L rod in place of the boom arm and tighten the nut D Finally the stopper bolt of the cymbal L rod Should be reattached and secured Fig 2 Cymbal Felt STAR cymbal felts are designed so the outer white felt ring contacts the cymbal surface This lesser contact with the cymbal allows for increased cymbal resonance However it is also reversible in which case the larger gray Dortion contacts the cymbal for containment of overtones if desired TAMA STAR 1
Download Pdf Manuals
Related Search