E-スイッチ D N NEM-C72A (表).ai
Contents
1. A A O O O TEL 06 6732 0200 9 00 13 00 14 00 17 30 http www jrpropo co jp jpn support E D A Deans Ultra Plug2. 3 577 0809 2 2 12 DR 25 30 NEM C72A JR PROPO www jrpropo co jp E SWITCH operation manual Electronic switch E Switch D With W S Deans Ultra Plug E Switch N With standerd JR connectors Thank you for purchasing this JR product To allow correct and safe use of this product Please be certain to read this operation manual Features e The electronic switch avoids problems with faulty switch contacts Fail safe design removing the switch plug powers up your radio system e Two choices of connector available Deans Ultra Plug or standerd JR connectors Specifications Product number E Switch D E Switch N Size 40 x 14 8 x 25 mm without cable Weight E Switch D 33 gram with cable E Switch N 23 gram with cable Operating voltage 4 0V 8 5V Please note this is not a voltage regulator When using voltages above 6 0V use JR Wide voltage or JR High Voltage servos For your safety be sure to observe the following points Configuration and Installation E E Switch D To the battery To the receiver Power supply harness A Connect to BIND BATT SENS Deans Ultra Plug a
3. Power supply harness B Female connector for binding To provide dual redundant power feeds insert this ON OFF Switch plug connector into a free Removing the switch plug turns power ON receiver slot Note The plug is not sensitive to insertion direction PLUG J E E Switch N To the battery Power supply harness A Standerd female JR connector Connect to BIND BATT SENS Female connector for binding To the receiver ON OFF Switch plug swrcn PLUG Removing the switch plug turns power ON Note The plug is not sensitive to insertion direction In order to protect against injury to users or third parties or damage to property please observe the following The informtion is divided and explained using the following symbols Caution Items are explained using this indication Obligatory Items are explained using this indication Prohibited Items are explained using this indication A If the product is used with a voltage other than the rated voltage it will be damage A Pay adequate attention to the remaining battery capacity during flights OQ Be sure to securely mount the switch to the airframe amp Do not disassemble or modify this product Do not get the product wet or damage may occur Do not use the product in environments where condensation occurs Do n
4. Eeg A 0 B ON OFF ON E N A BIND BATT SENS Con ON OFF ON 1 C sencer ll 2 P
5. JR PROPO www jrpropo co jp EAtvyF kis D Deans Ultra Plug N JR ie R 100 Deans Ultra plug D N 2 m E D E N 40 x 14 8 x 25 mm E D 33 g E N 23 g 4 0V 8 5V 6V Wide Voltage High Voltage
6. ot use any component which has been damaged included wires or connectors Be sure to disconnect the battery from switch unit between flying sessions Leaving the battery connected even with the switch plug inserted results in a small residual current draw that will eventually flatten the receiver battery and potentially damage it 1 Be sure to close the switch hatch to avoid damage from water or oil or other substances which may affect the operation of the switch Be sure to completely close the cover when flying 2 Securely mount the switch to the aircraft using the supplied screws and switch cover Main switch unit Switch cover Screws mec 3 Please be sure to respect connector polarity Reverce connection will damage the switch The switch may be mounted in any direction so long as it is secure http www jrpropo co jp english index html hi Fs
Download Pdf Manuals
Related Search