Home

INSYS Powerline GP

image

Contents

1. A Das INSYS Powerline GP ist nun von der Netzleitung getrennt 27 Montage INSYS Powerline GP Spannungsversorgung trennen gt gt 1 Das Ger t ist auf der Hutschiene montiert Die Spannungsversorgung ist angeklemmt und abgeschaltet Trennen Sie das Massekabel der Spannungsversorgung von der Klemme GND Trennen Sie den Pluspol der Spannungsversorgung von der Klemme f r die Spannungsversorgung A Das INSYS Powerline GP ist von der Spannungsversorgung getrennt Ger t von Hutschiene demontieren So demontieren Sie das INSYS Powerline GP von einer DIN Hutschiene in einem Schaltschrank Sie ben tigen einen Schlitzschraubendreher mit 4 5 mm Klingenbreite Die Spannungsversorgung des Schaltschranks ist abgestellt und gegen versehentliches Wiedereinschalten gesichert Alle Kabel am INSYS Powerline GP sind abgeklemmt 7 28 Offen liegende elektrische Komponenten Lebensgefahr durch Stromschlag Vor der Montage die Spannungsversorgung des Schaltschranks abschalten und gegen Wiedereinschalten sichern Fuhren Sie den Schlitzschraubendreher wie in der folgenden Abbildung gezeigt in die Rille hinten im Boden des INSYS Powerline GP ein INSYS Powerline GP Montage 2 Bewegen Sie den Schlitzschraubendreher wie in der folgenden Abbildung gezeigt zum INSYS Powerline GP hin e 4 V Die Kunststofffeder mit den unteren Rasthaken wird aus
2. INSYS PEV GP STA p line GP HLE Communication between HLE and PEV System State Matched b System State Unmatched Informs the HLE that the D D_LINK_TERMINATE REQ Resetup no current association Is terminated D LINK TERMINATE CHE Resetup no The Powerline GP will not fa S gt listen for SLAC Requests ge 6 from a PEV a SYS_SET_NMK i lt D_LINK_READY IND no link Abbildung 8 Sequenzdiagramm SLAC beenden mit D_LINK_TERMINATE REO Resetup no 40 INSYS Powerline GP Funktion Mit dem Kommando D_LINK_TERMINATE request RESETUP yes beendet das IN SYS Powerline GP eine ggf bestehende Verbindung und lasst eine neue SLAC Assoziierung zu INSYS PEV GP STA Powerline GP Communication between HLE and PEV System State Matched L be System State Unmatched ntorms the that the D LINK TERMINATE REA Resetup yes current association Is E terminated D LINK TERMINATE CNF Resetup yes From this point the ff ET gt Powerline GP will listen for No 20s for SLAC Requests 5 s from a PEV i SYS_SET_NMK i lt D_LINK_READY IND no link Abbildung 9 Sequenzdiagramm SLAC beenden mit D_LINK_TERMINATE REO Resetup yes 41 Funktion INSYS Powerline GP 9 4 1 3 Status Meldungen Die folgenden Statusmeldungen sind Ereignis basiert und werde
3. 4 2 Technologische Merkmale Technologische Eigenschaft Beschreibung Kompatibilitat HomePlug Green PHY 1 1 Ubertragungsraten Bis zu 10 Mbps auf der Powerline die tatsachlich nutzbare Datenrate ist durch die in den HomePlug Spezifikationen geforderte Koexistenz mit HomePlug AV niedriger Ankopplung an das Pilotsignal Gem ISO IEC 15118 3 FDIS Die Aufkoppelschaltung und Filter gegen Ruckwirkung auf das Ladesteuergerat sind im INSYS Powerline GP bereits integriert Tabelle 2 Technologische Eigenschaften 4 3 Zulassungen Das INSYS Powerline GP ist nach folgenden Richtlinien und Normen entwickelt e DIN EN 55022 Class B e DIN EN 61000 6 2 e DIN EN 60950 1 16 INSYS Powerline GP Anzeige und Bedienelemente 5 Anzeige und Bedienelemente 00000000 INSYS Powerline GP OOOOOOOO Abbildung 1 LEDs auf der Ger tevorderseite Position Bezeichnung 1 Status LED f r Ethernet Anschluss gelb 2 Status LED f r Ethernet Anschluss gr n 3 Link LED 4 Power LED 5 Pilot LED Status der Pilot Ankopplung Tabelle 3 Beschreibung der LEDs auf der Ger tevorderseite 17 Anzeige und Bedienelemente INSYS Powerline GP 5 1 Bedeutung der Anzeigen Bezeichnung Anzeige Bedeutung Status LED gelb LED an 100 MBit s Verbindung LED aus Keine Verbindung oder Verbindung mit 10 MBit s Status LED gr n LED an Verbunden LED blinkt Datenverkehr LED aus Nicht verbunde
4. AGB 1 2 Feedback Wir verbessern unsere Produkte und die zugeh rige Technische Dokumentation st ndig Dazu sind Ihre R ckmeldungen sehr hilfreich Bitte teilen Sie uns mit was Ihnen an unseren Produkten und Publikationen besonders gefallen hat und was wir Ihrer Meinung nach noch verbessern k nnen Wir sch tzen Ihre Anregungen sehr und werden diese in unsere Arbeit einflie en lassen um Ihnen und all unseren Kunden zu helfen Wir freuen uns ber jede Ihrer R ckmeldungen Schreiben Sie uns eine E Mail an support insys tec de Gerne erfahren wir welche Anwendungen Sie haben Schreiben Sie uns bitte ein paar Stichpunkte damit wir wissen welche Anforderungen Sie mit Produkten von INSYS icom l sen INSYS Powerline GP Allgemeines 1 3 Kennzeichnung von Warnungen und Hinweisen Symbole und Signalworter Schwere gesundheitliche Sch den Lebensgefahr Eines dieser Symbole in Verbindung mit dem Signalwort Gefahr kennzeichnet eine unmittelbare drohende Gefahr Bei Missachtung sind Tod oder schwerste Verletzungen die Folge gt gt Schwere gesundheitliche Schaden Lebensgefahr m glich Dieses Symbol in Verbindung mit dem Signalwort Warnung kennzeichnet eine m glicherweise gefahrliche Situation Bei Missachtung k nnen Tod oder schwerste Verletzungen die Folge sein gt Leichte Verletzungen und oder Sachschaden Dieses Symbol in Verbindung mit dem Signalwort Vorsicht kennzeichnet eine moglicherwe
5. Gl Fl E T E Gl INSYS Powerline GP Lizenzen dLAN SDK Terms of Use The software included in this package forms the dLAN SDK Copyright c 2013 devolo AG Aachen Germany All rights reserved Usage of the dLAN SDK and redistribution in binary form are permitted provided that the following conditions are met 1 Usage is subject to a current end user license agreement with the devolo AG 2 Neither the name of the devolo AG nor the names of its contributors may be used to endorse or promote products derived from this software without specif ic prior written permission 3 Redistribution is limited to binary form and exclusive usage related to devolo dLAN devices 4 Redistribution in binary form must reproduce the above copyright notice and the following disclaimer in the documentation and or other materials provided with the distribution DISLAIMER THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBU TORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT NESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT IN DIRECT INCIDENTAL SPECIAL EXE
6. DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Gl T T E Gl Gl T Gl E T T This file is part of the lwIP TCP IP stack Author Adam Dunkels lt adam sics se gt xA 64 INSYS Powerline GP Lizenzen Adam Dunkels a Copyrigh All righ Redistribution and use in source and binary forms modifica are met 1 Redis notice 2 Redis t c 2001 2003 Adam Dunkels ts reserved with or without tion are permitted provided that the following conditions tributions of source code must retain the above copyright this list of conditions and the following disclaimer tributions in binary form must reproduce the above copyright notice document 3 The n products this list of conditions and the following disclaimer in the ation and or other materials provided with the distribution used to endors ame of the author may not b or promote derived from this software without specific prio
7. Lebensgefahr durch Stromschlag bei Ber hrung Die fur die Kommunikation verwendete Netzleitung muss eine leicht zug ngliche fest installierte Trennvorrichtung und einen Leitungsschutzschalter aufweisen Der Leitungsschutzschalter darf maximal f r einen Nennstrom von 16A ausgelegt sein Bei ungeerdeten Versorgungsnetzen z B IT Netz oder DC Versorgung ohne PE Bezug muss die Trennvorrichtung zweipolig ausgef hrt sein 23 Montage INSYS Powerline GP N sse und Fl ssigkeiten aus der Umgebung k nnen ins Innere des INSYS Powerline GP gelangen Lebensgefahr durch Stromschlag bei Ber hrung sowie Brandgefahr und Besch digung des Produkts Das INSYS Powerline GP darf nicht in nassen oder feuchten Umgebungen oder direkt in der N he von Gew ssern eingesetzt werden Installieren Sie das INSYS Powerline GP an einem trockenen vor Spritzwasser gesch tzten Ort Schalten Sie die Spannung ab bevor Sie Arbeiten an einem INSYS Powerline GP durchf hren der mit Feuchtigkeit in Ber hrung kam Kurzschl sse und Besch digung durch unsachgem e Installation Feuer Funktionsausfall und Verletzungsgefahr Das INSYS Powerline GP sollte wie alle elektronischen Ger te mit besonderer Vorsicht behandelt werden Eine Montage darf nur durch eine Person die aufgrund ihrer fachlichen Ausbildung Kenntnisse und Erfahrungen sowie Kenntnis der einschl gigen Normen und Bestimmungen in der Lage ist Arbeiten an elektrischen An
8. l Abbildung 13 Sequenzdiagramm Status Meldung Timeout_TT_EVSE_match_join 45 Funktion INSYS Powerline GP 9 4 1 4 Status Abfrage Mit dem Kommando HC STATUS REO Req_DLinkStatus kann berpr ft werden ob zwischen dem INSYS Powerline GP und einem PEV ein AVLN besteht 46 PEV GP STA Abbildung 14 Sequenzdiagramm Status Abfrage HC_STATUS REO INSYS Powerline GP HC_STATUS REQ Reg DLinkStatus IRC STATUS CNF Reg DLinkStatus 0x00 gt HLE The Powerline GP response is 0x00 H there is no other device in the same AVLN Otherwise if there is one device in the AVLN the response is 0x01 INSYS Powerline GP Funktion 9 4 2 Befehle Die Befehle werden in Basic Ethernet Frames nach IEEE 802 3 bertragen und sind wie folgt aufgebaut 9 4 2 1 HC_LISTEN_FOR_SLAC_ASSN System State auf Unmatched setzen Das Ger t empf ngt SLAC Requests Vorbedingung System State ist Unoccupied Field Field size Definition octets Dest MAC 6 Powerline GP MAC Source MAC 6 HLE MAC Ethertype 2 Ethertype Oxabba Reserved 1 Reserved 0x00 Type 2 HC_LISTEN_FOR_SLAC_ASSN IND Type 0x0b01 AttenRxEVSE 58 Rx attenuation of the charging station see AttenRxEVSE Tabelle 12 HC LISTEN FOR SLAC ASSN IND Nachricht Best tigung von HC LISTEN FOR SLAC ASSN IND Ergebnis ist ein Fehler wenn System State nicht Unoccupied ist Field Field size Definiti
9. text provided below The FreeRTOS download also includes demo ap plication source code some of which is provided by third parties AND IS LICENSED SEPARATELY FROM FREERTOS ORG For the avoidance of any doubt refer to the comment included at the top of each source and header file for license and copyright information This is a list of files for which Real Time Engineers Ltd are not the copyright owner and are NOT COVERED BY THE GPL 1 Various header files provided by silicon manufacturers and tool vendors that define processor specific memory addresses and utility macros Permission has been granted by the various copyright holders for these files to be included in the FreeRTOS download Users must ensure license conditions are adhered to for any use other than compilation of the FreeRTOS demo applications 2 The ulP TCP IP stack the copyright of which is held by Adam Dunkels Users must ensure the open source license conditions stated at the top of each ulP source file is understood and adhered to The IwIP TCP IP stack the copyright of which is held by the Swedish Institute of Computer Science Users must ensure the open source license conditions stat ed at the top of each IwIP source file is understood and adhered to Various peripheral driver source files and binaries provided by silicon manufac turers and tool vendors Permission has been granted by the various copyright holders for these files to be included in the FreeRTOS downlo
10. IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LI ABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CON TRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Portions Copyright c 1996 Juniper Networks Inc All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that 1 source code distributions retain the above copyright notice and this paragraph in its entirety 2 distributions including binary code include the above copyright notice and this paragraph in its entirety in the documentation or other materials provided with the distribution The name of Juniper Networks may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED AS IS AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE Portio
11. INSYS Powerline GP sind folgende Dateien erforderlich verf gbar unter www insys icom de software e Kommandozeilenprogramm dlancontrol extended exe e Kommandozeilenprogramm cfgcontrol_extended exe e PIB Datei wird vom Ger t heruntergeladen 30 INSYS Powerline GP Funktion Folgende grundlegende Befehle stehen fur das Kommandozeilenprogramm zur Ver fugung dlancontrol extended device get info a lt DestMAC gt n lt NICMAC gt lt DestMAC gt MAC Adresse des Ger ts siehe Typenschild oder Statusinformationen lt NICMAC gt MAC Adresse der Netzwerk Schnittstelle ber Kommandozeilenbefehl getmac auslesbar Auslesen der Statusinformationen des Ger ts dlancontrol extended config get a lt DestMAC gt n lt NICMAC gt f lt OldPIB gt lt DestMAC gt MAC Adresse des Ger ts siehe Typenschild oder Statusinformationen lt NICMAC gt MAC Adresse der Netzwerk Schnittstelle ber Kommandozeilenbefehl getmac auslesbar lt OldPIB gt Dateiname unter dem die aktuelle PIB Datei abgelegt wird Auslesen der PIB Datei aus dem Ger t dlancontrol extended config set a lt DestMAC gt n lt NICMAC gt f lt NewPIB gt lt DestMAC gt MAC Adresse des Ger ts siehe Typenschild oder Statusinformationen lt NICMAC gt MAC Adresse der Netzwerk Schnittstelle ber Kommandozeilenbefehl getmac auslesbar lt NewPIB gt Dateiname der geanderten PIB Datei Schreiben der PIB Datei auf das Gerat d
12. SLAC ASSN CNF Nachricht 48 INSYS Powerline GP Funktion 9 4 2 3 HC_ATTEN_CALC_RESULT Statusmeldung die ein Attenuation Profile enthalt Jedes Mal wenn das Gerat ein Attenuation Profile an ein PEV sendet wird das selbe Profil auch an die HLE ge sendet Field Field size Definition octets Dest MAC 6 HLE MAC Source MAC 6 Powerline GP MAC Ethertype 2 Ethertype Oxabba Reserved 1 Reserved 0x00 Type 2 HC_ATTEN_CALC_RESULT IND Type 0x0b05 EV MAC 6 EV MAC RUN ID 8 RUN ID M Sound 1 Number of M Sound messages used for the calculation of the Atten uation Profile Attn 58 Attenuation Profile Tabelle 16 HC_ATTEN_CALC_RESULT IND Nachricht 9 4 2 4 D_LINK_READY Statusmeldung die eine erfolgreiche abgeschlossene SLAC Association angibt Field Field size Definition octets Dest MAC 6 HLE MAC Source MAC 6 Powerline GP MAC Ethertype 2 Ethertype Oxabba Reserved 1 Reserved 0x00 Type 2 D_LINK_READY IND Type 0x0b06 Result 1 Result of D LINK READY IND 0x00 link established 0x01 no link Tabelle 17 D LINK READY IND Nachricht Funktion INSYS Powerline GP 9 4 2 5 D LINK TERMINATE Beendet eine aktuelle SLAC Association Wenn Resetup yes ist empf ngt das Ge r t wieder SLAC Reguests Wenn Resetup noist bleibt das Ger t im Zustand Un matched Vorbedingung System State ist Matched oder Unmatched Fie
13. der Umschaltung auf Netzleitung 36 INSYS Powerline GP Funktion 9 3 2 Umschaltung auf Pilotleitung Mit folgendem Ethernet Paket wird auf Pilotleitung umgeschaltet Field Field size Definition octets Dest MAC 6 Powerline GP MAC Source MAC 6 Sender MAC Ethertype 2 Ethertype Oxcafe Reserved 1 Reserved 0x00 Command ID 2 Ox0f0e 58 Fill up to 60 bytes Tabelle 10 Nachricht zum Umschalten auf Pilotleitung Die Umschaltung wird mit folgendem Paket best tigt Field Field size Definition octets Dest MAC 6 Sender MAC from request Source MAC 6 Powerline GP MAC Ethertype 2 Ethertype Oxcafe Reserved 1 Reserved 0x00 Command ID 2 Ox0f0e Status Oxaaaa error 0x5555 success Status message text string of variable length Tabelle 11 Nachricht zur Bestatigung der Umschaltung auf Pilotleitung 9 4 SLAC Protokoll Das Modem INSYS Powerline GP implementiert das SLAC Protokoll nach ISO IEC15118 3 FDIS fur die Ladesaulen Seite EVSE Ziel des SLAC Protokolls ist die Assoziierung zwischen PEV Plug In Electronic Vehicle und EVSE Nach einer erfolgreichen Assoziierung stellen PEV und EVSE ein AVLN AV Logical Network her Der einfachste Fall f r einen erfolgreichen Ablauf des SLAC Protokoll ware wie folgt 1 Das Modem ist korrekt konfiguriert und mit einem Control Pilot Signal ver bunden 2 Ein PEV ist ebenfalls mit dem Control Pilot Signal
14. distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License c If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print 57 Lizenzen INSYS Powerline GP 58 such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If identifiable sec tions of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as sepa rate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the en tire whole and thus to each and every part regardless
15. e oa 10 Pflichten des Betreibers 10 PUSELED NA LE 17 POWER EDS seerd en aeei nenns 17 Qualifikation eegene eege edd 10 Reparatur 13 53 Heser Emgang 20 enga 16 Schaltschrank u a 28 Schulzklasse n a 15 era 9 Signalwort Aa 7 Spannungsversorgung 20 Klang na 12 24 SVM Ob EE 7 8 1021451 POM hee 10 Uberspannung 13 15 berspannungsschutZ 13 15 berstreni eitada alto kliki 13 Umgebung ti kaani dkar nated kat 12 24 Umgebungstemperatur 15 Umweltschutz mnmmenneea 11 Verwertung EE 54 Vorbedmgungen een 8 Zus tzliche Informationen 8 75
16. of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or dis tribution medium does not bring the other work under the scope of this License You may copy and distribute the Program or a work based on it under Sec tion 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommer cial distribution and only if you rec
17. und 8 Pilot Out Pilot Out kann dabei direkt mit dem Pin CP der Ladesteckdose und Pilot Out mit dem PE Anschluss der Ladesteckdose verbunden werden A Das INSYS Powerline GP ist nun an die Pilotleitung angeschlossen INSYS Powerline GP Montage Pilotleitung trennen gt gt 1 Das Ger t ist auf der Hutschiene montiert Die Spannungsversorgung ist angeklemmt und abgeschaltet Trennen Sie die Pilotsignalquelle von den Klemmen 5 Pilot In und 6 Pilot In Trennen Sie die Ladesteckdose von den Klemmen 7 Pilot Out und 8 Pilot Out A Das INSYS Powerline GP ist nun von der Pilotleitung getrennt Netzleitung anklemmen bei Bedarf gt gt gt Das Ger t ist bereits auf der Hutschiene montiert Die Spannungsversorgung ist angeklemmt und abgeschaltet Die Netzleitung ist spannungslos Klemmen Sie den Neutralleiter der Netzleitung an die Klemme 14 N an Klemmen Sie den Phasenleiter der Netzleitung an die Klemme 16 L an A Das INSYS Powerline GP ist nun an die Netzleitung angeschlossen Netzleitung trennen bei Bedarf gt gt gt Das Ger t ist auf der Hutschiene montiert Die Spannungsversorgung ist angeklemmt und abgeschaltet Die Netzleitung ist spannungslos Trennen Sie den Neutralleiter der Netzleitung von der Klemme 15 N Trennen Sie den Phasenleiter der Netzleitung von der Klemme 16 GET
18. 2 1 Bestimmungsgem Be Verwendung ENEE 9 2 2 Technische Grenzwerte nenne 9 2 3 Pflichten des Betreibers 10 2 4 Qualifikation des Personals 10 2 5 Hinweise zu Transport und Lagerung 10 2 6 Kennzeichnungen auf dem Produkt 11 217 OPAWEGITSCIUEZ 2 escceccccscisaivcscavececece TTT TTT 11 2 8 Sicherheitshinweise zur elektrischen Installaton 12 2 9 Grundlegende Sicherheitshinweise ue 12 UT TOTALING EE 14 Technische Daten unten 15 4 1 Physikalische Merkmale ccssssserccccsseceecsseeeeecsneeeecusneeeeessueseeassuseesaseeseeaasss 15 4 2 Technologische Merkmiale ccccccssssssseeeeeecceeeeesseeecceeeeeeeeauseeeceeeeesesasseeeess 16 4 3 Zulassungen REISTE reine 16 Anzeige und Bedienelemente Au 17 5 1 Bedeutung der Anzeigen ee nn 18 TEE 19 6 1 Anschl sse Vorderseite kee 19 6 2 Klemmanschl sse Unterseite uuuuuuesnnnennnnnnnnnnnnnnnnnnnnnnsnnunnnnnnnnnnnnnnnnnnnnnnnnennnnnnn 20 6 3 Klemmanschl sse Oberseite uuususnunnennnnnnnnnunnnnnnnnnnnnnnnunnnnnnnnnnnnnnnnnnnnnnnnennnnnnn 21 Funktishstibersicht Age geg E 22 ein le CEET 23 Jan 14 Contents Jan 14 10 11 12 13 14 15 Funktion zus 30 9 1 Firmware Updat8 E 30 9 2 Konfiguration EEN 30 9 2 1 Setzen des NMK Network Membership Key cccccccsccsseecseeeeeeeeees 33 9 2 2 SLAC f r EVSE akttvieren eE E E E ELER ERETI E ATE EES 34 9 2 3 SLAC f r EVSE deaktivieren 35 9 3 Umschaltung zwischen Pilotl
19. 2 3 Pflichten des Betreibers Der Betreiber muss grundsatzlich die in seinem Land geltenden nationalen Vor schriften bezuglich Betrieb Funktionsprufung Reparatur und Wartung von elektro nischen Geraten beachten 2 4 Qualifikation des Personals Die Installation Inbetriebnahme und Wartung des Produkts darf nur durch ausge bildetes Fachpersonal erfolgen das vom Anlagenbetreiber dazu autorisiert wurde Das Fachpersonal muss diese Dokumentation gelesen und verstanden haben und die Anweisungen befolgen Der elektrische Anschluss und die Inbetriebnahme des Produkts darf nur durch eine Person erfolgen die aufgrund ihrer fachlichen Ausbildung Kenntnisse und Erfah rungen sowie Kenntnis der einschlagigen Normen und Bestimmungen in der Lage ist Arbeiten an elektrischen Anlagen auszuf hren und mogliche Gefahren selb standig zu erkennen und zu vermeiden 2 5 Hinweise zu Transport und Lagerung Die folgenden Hinweise sind zu beachten e Das Produkt wahrend des Transports und der Lagerung keiner Feuchtigkeit und keinen anderen moglicherweise schadlichen Umweltbedingungen Einstrahlung Gase usw aussetzen Produkt entsprechend verpacken e Das Produkt so verpacken dass es vor Erschutterungen beim Transport und bei der Lagerung geschutzt ist z B durch luftgepolsterte Verpackung Produkt vor Installation auf m gliche Besch digungen berpr fen die durch un sachgem en Transport oder unsachgem e Lagerung entstanden sein k nnte
20. ERCHANTABILITY AND FIT NESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUD ING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SER VICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEV ER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This product includes software developed by the University of California Lawrence Berkeley Laboratory and its contributors This product includes software developed by the Kungliga Tekniska H gskolan and its contribu tors This product includes software developed by Yen Yen Lim and North Dakota State University Portions Copyright c 1990 1991 1992 1993 1994 1995 1996 1997 The Regents of the University of California All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of condi tions and the following disclaimer in the documentation a
21. MPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CON TRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 67 Lizenzen INSYS Powerline GP Copyright c 1999 2005 NetGroup Politecnico di Torino Italy Copyright c 2005 2010 CACE Technologies Davis California All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of condi tions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of the Politecnico di Torino CACE Technologies nor the names of its con tributors may be used to endorse or promote products derived from this software without specif ic prior written permission THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBU TORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF M
22. Nicom Industrielle Datenkommunikation INSYS Powerline GP md 22222008 INSYS Powerline GP O Q bink Power Pilot D N 99 d a O an Copyright January 14 INSYS MICROELECTRONICS GmbH Jede Vervielfaltigung dieses Handbuchs ist nicht erlaubt Alle Rechte an dieser Do kumentation und an den Ger ten liegen bei INSYS MICROELECTRONICS GmbH Regensburg Warenzeichen und Firmenzeichen Die Verwendung eines hier nicht aufgefuhrten Waren oder Firmenzeichens ist kein Hinweis auf die freie Verwendbarkeit desselben MNP ist ein eingetragenes Warenzeichen von Microcom Inc IBM PC AT XT sind Warenzeichen von International Business Machine Corporati on INSYS e Mobility LSG und e Mobility PLC sind eingetragene Warenzeichen der INSYS MICROELECTRONICS GmbH Windows ist ein Warenzeichen von Microsoft Corporation Linux ist ein eingetragenes Warenzeichen von Linus Torvalds Herausgeber INSYS MICROELECTRONICS GmbH Hermann K hl Str 22 93049 Regensburg Telefon 49 941 58692 0 Telefax 49 941 58692 45 E Mail info insys icom de Internet http www insys icom de Datum Jan 14 Artikelnummer 10015596 Version 1 1 Sprache DE Inhalt PIG E Te 6 1 1 Gew hleistungsbestrmmungen ENEE 6 L Feedback EEE geess geg gen ebessen Seeerei EH 6 1 3 Kennzeichnung von Warnungen und Hinweisen EEN 7 1 4 Symbole und Formatierungen dieser Anleitung 8 Set 9
23. P Modem l sends an Attenuation Profile to a PEV Worst case timer for the whole SLAC Process 25s HC_ATTEN_CALC_RESULT IND IN System State I Matched j b 1 I 1 SLAC association successfully D_LINK_READY IND link established Communication between HLE and PEV Abbildung 6 Sequenzdiagramm SLAC starten 38 INSYS Powerline GP Funktion 9 4 1 2 SLAC beenden Eine bestehende Verbindung kann auf folgende Arten beendet werden Mit dem Kommando HC_STOP_LISTEN_FOR_SLAC_ASSN IND nimmt das INSYS Powerline GP an keiner SLAC Assoziierung mehr teil und terminiert ggf eine be stehende Verbindung INSYS PEV GP STA Powerline GP A System State Unoccupied Communication between HLE and PEV lt DC STOP LISTEN FOR SLAC ASSN IND L SYS_SET_NMK j D LINK READY IND no link 2 UT JI HC_STOP_LISTEN_FOR_SLAC_ASSN CNF EE gt o 5s Informs the HLE that the current association is terminated and a new SLAC ASSN could be started Be aware that you have to wait for this signal before you send again a HC_LISTEN_FOR_SLAC_ ASSN IND request Abbildung 7 Sequenzdiagramm SLAC beenden mit HC_STOP_LISTEN_FOR_SLAC_ASSN IND 39 Funktion INSYS Powerline GP Mit dem Kommando D_LINK_TERMINATE request RESETUP no nimmt das INSYS Powerline GP an keiner SLAC Assoziierung mehr teil und terminiert ggf eine be stehende Verbindung
24. ad Users must ensure license conditions are adhered to for any use other than compilation of the FreeRTOS demo applications 5 The files contained within Fre eRTOS Demo WizNET_DEMO_TERN_186 tern_code which are slightly modified versions of code provided by and copyright to Tern Inc Errors and omissions should be reported to Richard Barry contact details for whom can be obtained from http www FreeRTOS org 3 4 The GPL license text follows A special exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the source code for any proprietary components See the licensing section of http www FreeRTOS org for full details The exception text is also included at the bottom of this file 56 INSYS Powerline GP Lizenzen GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License applies to any program or other work which contains a notice 2 placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Pro gram or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included w
25. dem Namen new pib auf ein Ger t Die MAC Adresse des Ger ts ist bekannt hier 00 05 B6 01 2F FC Die MAC Adresse der Schnittstelle an der das Ger t angeschlossen ist ist bekannt hier 00 1B 21 A0 90 E0 1 Geben Sie den Befehl wie folgt in die Kommandozeile ein c gt dlancontrol_extended config set a 00 05 B6 01 2F FC n 00 1B 21 A0 90 E0 f new pib A Die PIB Datei wird auf das Ger t hochgeladen e Zur cksetzen des Ger ts So setzen Sie ein INSYS Powerline GP zur ck Die MAC Adresse des Ger ts ist bekannt hier 00 05 B6 01 2F FC Die MAC Adresse der Schnittstelle an der das Ger t angeschlossen ist ist bekannt hier 00 1B 21 A0 90 E0 1 Geben Sie den Befehl wie folgt in die Kommandozeile ein c gt dlancontrol_extended device reset a 00 05 B6 01 2F FC n 00 1B 21 A0 90 E0 A Das Ger t wird zur ckgesetzt 32 INSYS Powerline GP Funktion 9 2 1 Setzen des NMK Network Membership Key Die Teilnehmer im Powerline Netzwerk mussen Uber einen gemeinsamen Network Membership Key Netzwerkmitgliedsschlussel verfugen Dieser kann aus einem Netzwerkpasswort erzeugt und ber die PIB Datei auf einen INSYS Powerline GP hochgeladen werden Dafur sind folgende Dateien erforderlich e Kommandozeilenprogramm dlancontrol_extended exe e Kommandozeilenprogramm cfgcontrol_extended exe e PIB Datei wird vom Ger t heruntergeladen Folgende grundlegende Befehle stehen fur das Kommandozeilenprogramm zur Ver f
26. dlungsschritt Dieser sagt Ihnen was Sie an dieser Stelle tun m ssen Zur besseren Orientierung sind die Schritte nummeriert A Ein Ergebnis das Sie nach Ausf hren eines Schrittes bekommen ist mit einem H kchen gekennzeichnet Hier k nnen Sie kontrollieren ob die zuvor gemachten Schritte erfolgreich waren Zus tzliche Informationen die an dieser Stelle Ihre Beachtung finden sollten sind mit einem eingekreisten i gekennzeichnet Hier werden Sie auf m gliche Fehlerquellen und deren Vermeidung hingewiesen gt Alternative Ergebnisse und Handlungsschritte sind mit einem Pfeil gekennzeichnet Hier erfahren Sie wie Sie auf einem anderen Weg zum gleichen Ergebnis kommen oder was Sie tun k nnen falls Sie an dieser Stelle nicht das erwartete Ergebnis bekommen haben INSYS Powerline GP Sicherheit 2 Sicherheit Der Abschnitt Sicherheit verschafft einen berblick ber die f r den Betrieb des Produkts zu beachtenden Sicherheitshinweise Das Produkt ist nach den derzeit g ltigen Regeln der Technik gebaut und betriebs sicher Es wurde gepr ft und hat das Werk in sicherheitstechnisch einwandfreiem Zustand verlassen Um diesen Zustand ber die Betriebszeit zu erhalten sind die Angaben der geltenden Publikationen und Zertifikate zu beachten und zu befolgen Die grundlegenden Sicherheitshinweise sind beim Betrieb des Produkts unbedingt einzuhalten Uber die grundlegenden Sicherheitshinweise hinaus sind in den ein zelne
27. document or software without specific written prior permission THE SOFTWARE IS PROVIDED AS IS AND DIGITAL EQUIPMENT CORP DIS CLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS IN NO EVENT SHALL DIGITAL EQUIPMENT CORPORATION BE LIABLE FOR ANY SPECIAL DI 70 INSYS Powerline GP Lizenzen RECT INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSO EVER RESULTING FROM LOSS OF USE DATA OR PROFITS WHETHER IN AN AC TION OF CONTRACT NEGLIGENCE OR OTHER TORTIOUS ACTION ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE Portions Copyright C 1995 1996 1997 1998 and 1999 WIDE Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of condi tions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of the project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS AS IS AND ANY EXPRESS OR
28. e A Sa HC_LISTEN_FOR_SLAC_ASSN IND Powerline GP will listen for 20s for SLAC Requests from a PEV EE 4 He elle FOR_SLAC_ASSN C Sx i This status messages indicates that no PEV has established a link during the 20s timer To start the timer again you have to use D_LINK_TERMINATE REO Resetup yes wait for D_LINK_READY IND no link 20s HC_STOPLISTEN_FOR_SLAC_ASSN IND wait for D LINK READY IND no link HC_LISTEN_FOR_SLAC_ASSN IND l l l l l D or l l l l l l l 7 IC STATUS IND Timeout_TT_EVSE_SLAC_init 7 Abbildung 11 Sequenzdiagramm Status Meldung Timeout_TT_EVSE_SLAC_init 43 Funktion INSYS Powerline GP Mit der Statusmeldung Timeout_TT_EVSE_match_session teilt das INSYS Powerli ne GP der HLE mit dass es ein Attenuation Profile an ein PEV gesendet hat von diesem aber keine Antwort erhalten hat INSYS PEV GP STA Powerline GP HLE I A I I System State A Unmatched System State Unoccupied lt N k ae Wi Ke KW rom this point the A NS HC_LISTEN_FOR_SLAC_ASSN IND Powerline GP will listen VT nS i for 20s for SLAC HC_LISTEN_FOR_SLAC_ASSN CNF J l Ki l Requests from a PEV ee ee ee HC_ATTEN_CALC_RESULT IND SLAC association in process Timeout_TT_EVSE_match_session A Systemstate Unmatched This status message indicates that the Powerline GP has sent a
29. e GP bieten Ihnen die folgenden Funktionen e Kommunikation ber den Powerline Standard HomePlug GreenPHY e Einkopplung des Powerline Signals auf den Pilotleiter e Einkopplung des Powerline Signals auf die Netzleitung e SLAC Protokoll gem ISO IEC 15118 3 FDIS INSYS Powerline GP Montage 8 Montage Dieses Kapitel erklart wie Sie das INSYS Powerline GP auf einer Hutschiene monteren die Spannungsversorgung anklemmen die Kommunikationsleitung anklemmen und wie Sie es wieder demontieren k nnen Beachten Sie dazu unbedingt die Anweisungen im Abschnitt Sicherheit dieses Handbuchs insbesondere die Sicherheitshinweise zur elektrischen Installation Offen liegende elektrische Komponenten Lebensgefahr durch Stromschlag Vor der Montage die Spannungsversorgung des Schaltschranks abschalten und gegen Wiedereinschalten sichern Lebensgefahrliche Betriebsspannung Lebensgefahr durch Stromschlag bei Ber hrung Das INSYS Powerline GP ist ein elektronisches Gerat das ausschlie lich zur festen Installation zu nutzen ist Das INSYS Powerline GP muss so eingebaut werden dass es nach dem Einbau nicht mehr durch den Benutzer beruhrbar ist Ein Zugang zum eingebauten Gerat darf nur mittels Werkzeug Schlussel oder Entfernen einer internen Verblendung moglich sein AuBerdem muss ein Warnschild angebracht sein dass vor moglicherweise beruhrbaren spannungsfuhrenden Teilen warnt Lebensgefahrliche Betriebsspannung
30. e die Verbindung zwischen PE und dem negativen Pilotleitersignal an der Ladesteckdose d h an der Seite von Pilot Out erfolgen Die beiden Signale Pilot In und Pilot In sollten ohne PE Bezug direkt an die Pilotsignalquelle angeschlossen werden Siehe Abbildung 4 20 INSYS Powerline GP Anschl sse 1 3 4 5 6 7 8 Abbildung 4 Anschluss des Pilotsignals 6 3 Klemmanschl sse Oberseite sojes uoddns woddns E 5 g 3 1 zz SS O 33 EE ao ao SS 33 a eo S a lt P e EI 3 a max 240VAC 50Hz 0 02A au Su 3v Abbildung 5 Anschl sse auf der Ger teoberseite Klemme Bezeichnung Beschreibung 9 13 nicht beschaltet 14 N Powerline Anschluss 15 nicht beschaltet 16 L Powerline Anschluss Tabelle 7 Anschl sse auf der Ger teoberseite 21 Fun ktions bersicht INSYS Powerline GP 22 7 Funktions bersicht Gem der ISO IEC 15118 FDIS kommunizieren Ladestation EVSE und Elektrofahrzeug PEV Uber den Powerline Standard HomePlug GreenPHY 1 1 Die Anforderungen hierzu sind in der ISO IEC 15118 3 FDIS beschrieben Das INSYS Powerline GP stellt die Kommunikationsverbindung zwischen dem EVSE Controller nach ISO IEC 15118 2 FDIS und dem Elektrofahrzeug PEV zur Verf gung Dabei wird der Datenstrom gem ISO IEC 15118 3 FDIS auf dem Pilotleiter des Ladekabels oder auf der Netzleitung aufmoduliert Das INSYS Powerlin
31. e distributed by you under the terms of the GNU General Public License plus this exception An independent module is a mod ule which is not derived from or based on FreeRTOS Clause 1 Linking FreeRTOS statically or dynamically with other modules is making a com bined work based on FreeRTOS Thus the terms and conditions of the GNU Gen eral Public License cover the whole combination As a special exception the copyright holder of FreeRTOS gives you permission to link FreeRTOS with independent modules that communicate with FreeRTOS solely through the FreeRTOS API interface regardless of the license terms of these inde pendent modules and to copy and distribute the resulting combined work under terms of your choice provided that e Every copy of the combined work is accompanied by a written statement that details to the recipient the version of FreeRTOS used and an offer by yourself to provide the FreeRTOS source code including any modifications you may have made should the recipient request it e The combined work is not itself an RTOS scheduler kernel or related product e The independent modules add significant and primary functionality to FreeRTOS and do not merely extend the existing functionality already present in FreeRTOS Clause 2 FreeRTOS may not be used for any competitive or comparative purpose including the publication of any form of run time or compile time metric without the express permission of Real Time En
32. einandergezogen 3 W hrend Sie die Kunststofffeder mit den unteren Rasthaken gespannt halten klappen Sie das INSYS Powerline GP von der Hutschiene weg 4 Haken Sie das INSYS Powerline GP aus und nehmen Sie es senkrecht zur Hutschiene ab v Das INSYS Powerline GP ist nun von der Hutschiene demontiert 29 Funktion INSYS Powerline GP 9 Funktion Das Firmware Update und die Konfiguration erfordern dass auf dem dafur ver wendeten Computer die Programmbibliothek WinPcap installiert ist Die Pro grammbibliothek ist Freeware und unter www winpcap org erhaltlich 9 1 Firmware Update Eine Beschreibung des Firmware Updates und die dazu erforderlichen Dateien er halten Sie auf Anfrage von support insys tec de 9 2 Konfiguration Die Konfiguration des INSYS Powerline GP erfolgt grundsatzlich auf Kommandozei lenebene ber das Bearbeiten der PIB Datei nach folgendem Schema 1 PIB Datei aus dem Gerat auslesen und lokal ablegen 2 Neue Konfiguration in die PIB Datei eintragen 3 PIB Datei auf das Gerat hochladen 4 Ger t zur cksetzen um die Anderungen zu bernehmen Bei einer Konfiguration von mehreren Ger ten muss immer die PIB Datei des jeweiligen Ger ts ausgelesen und nach der nderung wieder hochgeladen werden Es darf keine PIB Datei eines anderen Ger ts verwendet werden Vor jeglichen nderungen sollte immer eine Sicherheitskopie der aktuellen PIB Datei angelegt werden F r die Konfiguration des
33. eitung und Netzletung AE 36 9 3 1 Umschaltung auf Netzletung 36 9 3 2 Umschaltung auf Pilotlertung 37 9 4 SLAC Protokoll KORPRRRBERETRRRANERSEERRTEFEERLGERAURERERRTEREREETTSERFEEEREREEORETFERTENFERLELEFTEELTETEFERLETFTITR 37 9 4 1 Ree 38 9 4 2 eelere 47 Wartung Reparatur und Storungsbeseitigung ssssccecesesseeeeeeeeees 53 10 1 Wart ng RE 53 10 2 St rungsbessitigung seinen abe 53 10 3 TEE 53 Seele UI e EE 54 11 1 R cknahme der Altger td 5 5x44 54 t didte ristuvat kate nrev nee hiiah nik 54 Konformit tserkl rung a we 55 RE 21 8743 EE 56 Tabellen amp Abbiddungen kk 73 ENEE Ee E 73 14 2 Abbidungsverzeichnts been 74 elle Ee Ten TE 75 Allgemeines INSYS Powerline GP 1 Allgemeines Diese Anleitung ermoglicht den sicheren und effizienten Umgang mit dem Produkt Die Anleitung ist Bestandteil des Produkts und muss fur Installations Inbetrieb nahme und Bedienpersonal jederzeit zuganglich aufbewahrt werden 1 1 Gew hrleistungsbestimmungen Eine nicht bestimmungsgem e Verwendung ein Nichtbeachten dieser Dokumen tation der Einsatz von unzureichend gualifiziertem Personal sowie eigenm chtige Ver nderungen schlie en die Haftung des Herstellers f r daraus resultierende Sch den aus Die Gew hrleistung des Herstellers erlischt Es gelten die Bestimmungen unserer Liefer und Einkaufsbedingungen AGB Die se finden Sie auf unserer Webseite www insys icom de impressum unter
34. eived the program in object code or exe cutable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the execut able However as a special exception the source code distributed need not in clude anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the exe cutable INSYS Powerline GP Lizenzen If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as ex pressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have the
35. erlangt werden angemessene MaBnahmen durchzuf hren Ger t auf Hutschiene montieren So montieren Sie das INSYS Powerline GP auf einer DIN Hutschiene 1 Setzen Sie das Ger t wie in der folgenden Abbildung gezeigt an der Hutschiene an An der oberen und der unteren Aussenkante der Hutschienennut des INSYS Powerline GP befinden sich jeweils zwei Rasthaken Haken Sie die oberen beim Ansetzen hinter der Oberkante der Hutschiene ein 25 Montage INSYS Powerline GP 26 2 Klappen Sie das INSYS Powerline GP senkrecht zur Hutschiene bis die zwei unteren beweglichen Rasthaken unten in der Hutschiene einrasten A Eeer A Das INSYS Powerline GP ist nun fertig montiert Spannungsversorgung anklemmen gt gt 1 Das Ger t ist bereits auf der Hutschiene montiert Die Spannungsversorgung steht bereit und ist abgeschaltet Klemmen Sie das Massekabel der Spannungsversorgung an der Klemme GND an Klemmen Sie den Pluspol der Spannungsversorgung an der Klemme f r die Spannungsversorgung an A Das INSYS Powerline GP ist nun an die Spannungsversorgung angeschlossen Pilotleitung anklemmen gt gt 1 Das Ger t ist bereits auf der Hutschiene montiert Die Spannungsversorgung ist angeklemmt und abgeschaltet Verbinden Sie die Pilotsignalquelle mit den Klemmen 5 Pilot In und 6 Pilot In Verbinden Sie die Ladesteckdose mit den Klemmen 7 Pilot Out
36. es the original copyright holder who places the Program under this License may add an explicit geographical distri bution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our deci sion will be guided by the two goals of preserving the free status of all deriva tives of our free software and of p
37. et werden Diese Einstellungen erfolgen uber die PIB Datei Dafur sind folgende Dateien erforderlich e Kommandozeilenprogramm cfgcontrol_extended exe e PIB Datei wird vom Ger t heruntergeladen Folgende grundlegende Befehle stehen fur das Kommandozeilenprogramm zur Ver fugung e cfgcontrol_extended cco get i lt PIBFile gt lt PIBFile gt Name der auszulesenden PIB Datei Auslesen der CCo Einstellung in der PIB Datei e cfgcontrol_extended cco set i lt PIBFile gt M Always lt PIBFile gt Name der zu bearbeitenden PIB Datei CCo in der PIB Datei auf CCo always einstellen e cfgcontrol_extended slac set mode i lt PIBFile gt M EVSE lt PIBFile gt Name der zu bearbeitenden DI Date SLAC fur EVSE aktivieren Gehen Sie wie folgt vor um die entsprechenden Vorg nge durchzuf hren e CCo in PIB Datei auf CCo always einstellen So stellen Sie die CCo in der PIB Datei auf CCo always 1 Geben Sie den Befehl wie folgt in die Kommandozeile ein c gt cfgcontrol_extended cco set i new pib M Always A CCo always wird in die PIB Datei geschrieben e SLAC in PIB Datei f r EVSE aktivieren So aktivieren Sie SLAC in der PIB Datei f r EVSE 1 Geben Sie den Befehl wie folgt in die Kommandozeile ein c gt cfgcontrol_extended slac set_mode i new pib M EVSE vV SLAC wird in der PIB Datei f r EVSE aktiviert 34 INSYS Powerline GP Funktion 9 2 3 SLAC fur EVSE deaktivieren SLAC Signal Leve
38. ew hrleistet werden dass das PEV einen korrekten D mpfungswert erh lt Charging station AttnRxEVSE Pilot out INSYS Powerline GP Modem 1S015118 3 LAN Abbildung 15 AttenRxEVSE INSYS Powerline GP Wartung Reparatur und Storungsbeseitigung 10 Wartung Reparatur und Storungsbeseitigung 10 1 Wartung Das Produkt ist wartungsfrei und erfordert keine besondere regelm ige Wartung 10 2 _St rungsbeseitigung Sollten w hrend des Betriebs des Produkts eine St rung auftreten finden Sie Hin weise zur St rungsbeseitigung in der Knowledge Base auf unserer Webseite http www insys icom de knowledge Falls Sie weitere Unterst tzung ben tigen setzen Sie sich mit dem Support von INSYS icom in Verbindung Sie erreichen un sere Support Abteilung per E Mail unter support insys tec de und per Telefon un ter 49 941 58692 0 10 3 Reparatur Senden Sie defekte Produkte mit detaillierter Fehlerbeschreibung an die Bezugs quelle Ihres Ger ts Falls Sie das Ger t direkt von INSYS icom bezogen haben sen den Sie das Ger t bitte an INSYS MICROELECTRONICS GmbH Hermann K hl Str 22 93049 Regensburg Kurzschl sse und Besch digung durch unsachgem e Reparaturen und Modifikationen sowie Offnen von Produkten Brandgefahr und Besch digung des Produkts Das ffnen des Produkts f r Reparaturarbeiten oder Modifikationen ist nicht erlaubt 53 Entsorgung INSYS Powerline GP 11 Entsor
39. ff V SLAC wird in der PIB Datei deaktiviert 35 Funktion INSYS Powerline GP 9 3 Umschaltung zwischen Pilotleitung und Netzleitung Das INSYS Powerline GP ist standardm ig fur eine Aufmodulierung des Powerli ne Signals auf die Pilotleitung konfiguriert Die Umschaltung fur eine Aufmodulie rung des Powerline Signals auf die Netzleitung erfolgt durch ein Ethernet Kommando Diese Umschaltung ist fluchtig d h nach einem Neustart ist das IN SYS Powerline GP wieder f r eine Aufmodulierung des Powerline Signals auf die Pilotleitung konfiguriert Fur die Umschaltung werden Basic Ethernet Frames nach IEEE 802 3 mit folgen dem Aufbau verwendet 9 3 1 Umschaltung auf Netzleitung Mit folgendem Ethernet Paket wird auf Netzleitung umgeschaltet Field Field size Definition octets Dest MAC 6 Powerline GP MAC Source MAC 6 Sender MAC Ethertype 2 Ethertype Oxcafe Reserved 1 Reserved 0x00 Command ID 2 0x0f10 58 Fill up to 60 bytes Tabelle 8 Nachricht zum Umschalten auf Netzleitung Die Umschaltung wird mit folgendem Paket best tigt Field Field size Definition octets Dest MAC 6 Sender MAC from request Command ID Source MAC 6 Powerline GP MAC Ethertype 2 Ethertype Oxcafe Reserved 1 Reserved 0x00 2 0x0f10 Status Oxaaaa error 0x5555 success Status message text string of variable length Tabelle 9 Nachricht zur Best tigung
40. gineers Ltd this is the norm within the industry and is intended to ensure information accuracy 63 Lizenzen INSYS Powerline GP Swedish Institute of Computer Science Copyright c 2001 Swedish Institute of Computer Science All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of the Institute nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS AG IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSI ARE DISCLAIMED IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE
41. gung 11 1 R cknahme der Altger te Gem den Vorschriften der WEEE ist die R cknahme und Verwertung von INSYS Altgeraten fur unsere Kunden wie folgt geregelt Bitte senden Sie Ihre Altger te frachtfrei an folgende Adresse Frankenberg Metalle G rtnersleite 8 96450 Coburg Deutschland Diese Vorschrift gilt f r Ger te aus Lieferungen ab dem 13 08 2005 Bitte denken Sie vor der der Entsorgung des Ger ts auch an evtl gespeicherte Passw rter oder Sicherheitszertifikate Es ist empfehlenswert evtl vorhandene Zug nge f r das Ger t z B auf Ihrem VPN Server zu sperren und das Ger t falls m glich auf Werkseinstellungen zur ckzusetzen bevor Sie es weitergeben oder entsorgen 54 INSYS Powerline GP Konformitatserklarung 12 Konformitatserklarung Dieses Gerat entspricht den Anforderungen der Richtlinie des Rats uber die Anglei chung von Rechtsvorschriften der Mitgliedsstaaten Uber die elektromagnetische Vertraglichkeit 2004 108 EC und der Niederspannungsrichtlinie 2006 95 EC Eine aktuelle Konformitatserklarung dieses Produkts finden Sie auf der beiliegen den Support CD im Abschnitt Dokumentation Wir senden Ihnen eine Kopie der Konformitatserklarung auch gerne auf Anfrage zu 55 Lizenzen INSYS Powerline GP 13 Lizenzen Der Quellcode der Firmware dieses Gerats unterliegt verschiedenen Lizenzen FreeRTOS The FreeRTOS org source code is licensed by the modified GNU General Public Li cense GPL
42. hricht zur Best tigung der Umschaltung auf Pilotleitung 37 Tabelle 12 HC LISTEN FOR SLAC AGGN IND Nachrcht 47 Tabelle 13 HC LISTEN FOR SLAC ASSN CNF Nachricht e 47 Tabelle 14 HC STOP LISTEN FOR SLAC ASSN IND Nachricht 48 Tabelle 15 HC STOP LISTEN FOR SLAC ASSN CNF Nachricht 48 Tabelle 16 HC ATTEN CALCRESULT IND Nachecht ne 49 Tabelle 17 D LINK READY IND Nachricht ne aaa 49 Tabelle 18 D LINK TERMINATEREONachncht nennen 50 Tabelle 19 D LINK TERMINATECNENachncht Henne 50 Tabelle 20 HC STATUS IND Nachricht aa 51 Tabelle 21 HC_STATUS REQ Nachricht aa 51 Tabelle 22 HC_STATUS CNF geb Ee deeg Ss 51 73 Tabellen amp Abbildungen INSYS Powerline GP 14 2 Abbildungsverzeichnis Abbildung 1 LEDs auf der Ger tevorderseite 00vnrnneennnnennnnnnnnnene 17 Abbildung 2 Anschl sse auf der Ger tevorderseite e 19 Abbildung 3 Anschl sse auf der Ger teunterseite en 20 Abbildung 4 Anschluss des bilorsonals nennen nennen nenn 21 Abbildung 5 Anschl sse auf der Ger teoberseite seen nnnneenn en 21 Abbildung 6 Seguenzdiagramm SLAC starten 38 Abbildung 7 Sequenzdiagramm SLAC beenden mit HC STOP LISTEN FOR SLAC ASSNUIND ae le 39 Abbildung 8 Sequenzdiagramm SLAC beenden mit D LINK TERMINATEREO FRO SEU UID EE 40 Abbildung 9 Sequenzdiagramm SLAC beenden mit D LINK TERMINATE REOA PRES te EE 41 Abbildung 10 Seque
43. ir licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it How ever nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Pro gram or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy dis tribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third par ties to this License 7 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the condi tions of this License they do not excuse you from the conditions of this Li cense If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a c
44. ise gefahrliche oder schadliche Situation Bei Missachtung konnen leichte oder geringfugige Verletzungen die Folge sein oder das Produkt oder etwas in seiner Umgebung beschadigt werden gt Hinweis Optimierung der Anwendung Dieses Symbol in Verbindung mit dem Signalwort Hinweis kennzeichnet Anwendungstipps oder besonders n tzliche Informationen Diese Informationen helfen bei Installation Einrichtung und Betrieb des Produkts zur Sicherstellung eines st rungsfreien Betriebs Allgemeines INSYS Powerline GP 1 4 Symbole und Formatierungen dieser Anleitung Im Folgenden werden die Festlegungen Formatierungen und Symbole erklart die in diesem Handbuch verwendet werden Die unterschiedlichen Symbole sollen Ihnen das Lesen und Auffinden der fur Sie wichtigen Information erleichtern Der folgende Text entspricht in seiner Struktur den Handlungsanweisungen dieses Handbuchs Fett gedruckt Das Handlungsziel Hier erfahren Sie was Sie mit den folgenden Schritten erreichen Nach der Nennung des Handlungsziels wird detaillierter erklart was mit der Handlungsanweisung erreicht werden soll So k nnen Sie entscheiden ob der Abschnitt berhaupt f r Sie relevant ist Vorbedingungen die erf llt sein m ssen damit die nachfolgenden Schritte sinnvoll abgearbeitet werden k nnen sind mit einem Pfeil gekennzeichnet Hier erfahren Sie zum Beispiel welche Software oder welches Zubeh r Sie ben tigen 1 Ein einzelner Han
45. ision version 69 Copyright C year name of author Gno movision comes with ABSOLUTELY NO WARRANTY for details type show wi This is free software and you are welcome to redis tribute it under certain conditions type show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course the commands you use may be called something other than show w and show c they could even be mouse clicks or menu items whatever suits your program You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the program if necessary Here is a sam ple alter the names Yoyodyne Inc hereby disclaims all copyright interest in the program Gnomovision which makes passes at compilers written by James Hacker Signature of Ty Coon 1 April 1989 Ty Coon President of Vice This General Public License does not permit incorporating your program into pro prietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is what you want to do use the GNU Lesser General Public License instead of this License 62 INSYS Powerline GP Lizenzen The FreeRTOS GPL Exception Text Any FreeRTOS source code whether modified or in it s original release form or whether in whole or in part can only b
46. ithout fee is hereby granted provided that this copyright and permission notice appear on all copies and sup porting documentation the name of Carnegie Mellon not be used in advertising or publicity per taining to distribution of the program without specific prior permission and notice be given in supporting documentation that copying and distribution is by permission of Carnegie Mellon and Stanford University Carnegie Mellon makes no representations about the suitability of this software for any purpose It is provided as is without express or implied warranty 72 INSYS Powerline GP Tabellen amp Abbildungen 14 14 1 Tabelle 1 Tabelle 2 Tabelle 3 Tabelle 4 Tabelle 5 Tabelle 6 Tabelle 7 Tabellen amp Abbildungen Tabellenverzeichnis Physikalische Eigenschaften u een 15 Technologische Eigenschaften 16 Beschreibung der LEDs auf der Ger tevorderseite 00nnnnn00011100111 17 Bedeutung der TED Anzegen nenne nenne nennen 18 Anschl sse auf der Ger tevorderseite 00nnnnrnnnnnnnnnenneea 19 Anschl sse auf der Ger teunterseite enne nene 20 Anschl sse auf der Ger teoberseite nnrnnnrnnnennnnnennnea 21 Tabelle 8 Nachricht zum Umschalten auf Netzleitung sen 36 Tabelle 9 Nachricht zur Best tigung der Umschaltung auf Netzleitung 36 Tabelle 10 Nachricht zum Umschalten auf Pilotleitung nn 37 Tabelle 11 Nac
47. ithout limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents con stitute a work based on the Program independent of having been made by run ning the Program Whether that is true depends on what the Program does You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriate ly publish on each copy an appropriate copyright notice and disclaimer of war ranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this Li cense along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifica tions or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you
48. l Attenuation Characterization wird deaktiviert indem der Cen tral Coordinator auf CCo automatic eingestellt und SLAC deaktiviert wird SLAC disable Diese Einstellungen erfolgen uber die PIB Datei Dafur sind folgende Dateien erforderlich e Kommandozeilenprogramm cfgcontrol_extended exe e PIB Datei wird vom Ger t heruntergeladen Folgende grundlegende Befehle stehen fur das Kommandozeilenprogramm zur Ver fugung e cfgcontrol_extended cco get i lt PIBFile gt lt PIBFile gt Name der auszulesenden PIB Datei Auslesen der CCo Einstellung in der PIB Datei e cfgcontrol_extended cco set i lt PIBFile gt M Auto lt PIBFile gt Name der zu bearbeitenden PIB Datei CCo in der PIB Datei auf CCo automatic einstellen e cfgcontrol_extended slac set mode i lt PIBFile gt M off lt PIBFile gt Name der zu bearbeitenden PIB Datei SLAC in der PIB Datei deaktivieren Gehen Sie wie folgt vor um die entsprechenden Vorg nge durchzuf hren e CCo in PIB Datei auf CCo automatic einstellen So stellen Sie die CCo in der PIB Datei auf CCo automatic 1 Geben Sie den Befehl wie folgt in die Kommandozeile ein c gt cfgcontrol_extended cco set i new pib M Auto A CCo automatic wird in die PIB Datei geschrieben e SLAC in PIB Datei deaktivieren So deaktivieren Sie SLAC in der PIB Datei 1 Geben Sie den Befehl wie folgt in die Kommandozeile ein c gt cfgcontrol_extended slac set_mode i new pib M o
49. lagen auszuf hren und m gliche Gefahren selbst ndig zu erkennen und zu vermeiden nach den allgemein anerkannten Regeln der Technik und den Bestimmungen die f r das Errichten von Fernmeldeeinrichtungen bzw endger ten ma gebend sind durchgef hrt werden Ger tezerst rung durch falsche Spannungsquelle Wenn das INSYS Powerline GP mit einer Spannungsquelle betrieben wird die eine gr ere Spannung als die zul ssige Betriebspannung des INSYS Powerline GP liefert wird das Ger t zerst rt Sorgen Sie f r eine geeignete Spannungsversorgung Den richtigen Spannungsbereich f r das INSYS Powerline GP finden Sie im Abschnitt Technische Daten 24 INSYS Powerline GP Montage Ger tezerst rung durch Transportsch den und falsche Anschlussbedingungen Wenn ein INSYS Powerline GP mit Transportsch den verwendet wird oder falsche Anschlussbedingungen vorliegen wird das Ger t zerst rt berpr fen Sie bitte vor der Montage das Ger t auf u erlich erkennbare Transportsch den sowie die Anschlussbedingungen vor Ort mit den Erfordernissen des Ger ts Der Anschluss darf nur mit geeignetem Werkzeug erfolgen und darf nicht unter Spannung vorgenommen werden Hinweis Funkst rungen im Kurzwellenbereich Das INSYS Powerline GP kann den Empfang von Kurzwellenfunk im unmittelbaren Nahbereich einschr nken Das INSYS Powerline GP kann im Wohnbereich Funkstorungen verursachen in diesem Fall kann vom Betreiber v
50. lancontrol extended device reset a lt DestMAC gt n lt NICMAC gt lt DestMAC gt MAC Adresse des Ger ts siehe Typenschild oder Statusinformationen lt NICMAC gt MAC Adresse der Netzwerk Schnittstelle ber Kommandozeilenbefehl getmac auslesbar Zurucksetzen des Gerats Gehen Sie wie folgt vor um die entsprechenden Vorg nge durchzuf hren 1 Auslesen der Statusinformationen So lesen Sie die Statusinformationen eines INSYS Powerline GP aus Die MAC Adresse des Ger ts ist bekannt hier 00 05 B6 01 2F FC Die MAC Adresse der Schnittstelle an der das Ger t angeschlossen ist ist bekannt hier 00 1B 21 A0 90 E0 Geben Sie den Befehl wie folgt in die Kommandozeile ein c gt dlancontrol_extended device get_info a 00 05 B6 01 2F FC n 00 1B 21 A0 90 E0 A Die Statusinformationen des Ger ts werden angezeigt 31 Funktion INSYS Powerline GP e Auslesen der PIB Datei So lesen Sie die PIB Datei eines Ger ts aus und legen Sie sie unter dem Namen old pib ab Die MAC Adresse des Gerats ist bekannt hier 00 05 B6 01 2F FC Die MAC Adresse der Schnittstelle an der das Gerat angeschlossen ist ist bekannt hier 00 1B 21 A0 90 E0 1 Geben Sie den Befehl wie folgt in die Kommandozeile ein c gt dlancontrol_extended config get a 00 05 B6 01 2F FC n 00 1B 21 A0 90 E0 f old pib A Die PIB Datei wird unter dem angegebenen Namen abgelegt e Schreiben der PIB Datei So laden Sie die PIB Datei mit
51. ld Field size Definition octets Dest MAC 6 Powerline GP MAC Source MAC 6 HLE MAC Ethertype 2 Ethertype Oxabba Reserved 1 Reserved 0x00 Type 2 D_LINK_TERMINATE REO Type 0x0b07 Request 1 0x00 Resetup yes 0x01 Resetup no AttenRxEVSE 58 Rx attenuation of the charging station see AttenRxEVSE Tabelle 18 D LINK TERMINATE REA Nachricht Best tigung von D LINK TERMINATE REOA Ergebnis ist ein Fehler wenn System State Unoccupied ist Field Field size Definition octets Dest MAC 6 HLE MAC Source MAC Powerline GP MAC Reserved 0x00 D_LINK_TERMINATE CNF Type 0x0b08 Request type of the previously received HC_ATTEN_CALC_RESULT IND message 0x00 Resetup yes 0x01 Resetup no Status 1 0x00 failure 0x01 success Tabelle 19 D_LINK_TERMINATE CNF Nachricht Reserved Type Previous req 6 Ethertype 2 Ethertype Oxabba 1 2 1 50 INSYS Powerline GP Funktion 9 4 2 6 HC_STATUS Indication Gibt mehrere Statusinformationen an Field Field size Definition octets Dest MAC 6 HLE MAC Source MAC 6 Powerline GP MAC Ethertype 2 Ethertype Oxabba Reserved 1 Reserved 0x00 Type 2 HC_STATUS IND Type 0x0b09 HC_Status 1 0x00 Timeout TT EVSE SLAC init type 0x01 System Ready 0x02 Timeout TT EVSE match MNBC 0x03 Timeout TT EVSE match session 0x04 Timeout TT match join 0x05 Timeout TT match seguence 0x06 Timeout TT
52. llowing conditions are met 1 Usage in source form is subject to a current end user license agreement with the devolo AG 2 Neither the name of the devolo AG nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission 3 Redistribution in binary form is limited to the usage on the GreenPHY module of the devolo AG 4 Redistribution in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution T THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS D LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF TH POSSIBILITY OF SUCH DAMAGE Gl Gl E
53. match response 0x07 System init Failed Tabelle 20 HC STATUS IND Nachricht 9 4 2 7 HC STATUS Reguest Fordert eine Statusinformation von einem Ger t an Field Field size Definition octets Dest MAC 6 Powerline GP MAC Source MAC 6 HLE MAC Ethertype 2 Ethertype Oxabba Reserved 1 Reserved 0x00 Type 2 HC_STATUS REO Type 0x0b0a Request 1 0x00 Reg DLinkStatus Tabelle 21 HC STATUS REO Nachricht Best tigung von HC STATUS REO Statusinformation vom Ger t Field Field size Definition octets Dest MAC 6 Source MAC of HC_STATUS REQ Source MAC 6 Powerline GP MAC Ethertype 2 Ethertype Oxabba Reserved 1 Reserved 0x00 Type 2 HC STATUS CNF Type 0x0b0b Previous reg 1 Request type of the previously received HC STATUS REO message 0x00 Reg DLinkStatus Reg status Number of GreenPHY stations in the AVLN 0x00 no link with PEV 0x01 existing link with one PEV Tabelle 22 HC STATUS CNF Nachricht Funktion INSYS Powerline GP 52 9 4 2 8 AttenRxEVSE Dieser Wert steht f r die D mpfung in der Lades ule zwischen der Ladekupplung und dem Pilot Out des INSYS Powerline GP ohne Ladekabel AttenRxEVSE hat dasselbe Format wie ein Attenuation Profile welches in der Homeplug GreenPHY Spezifikation 1 1 ATTEN_PROFILE beschrieben ist Das w hrend des SLAC Protokolls berechnete Attenuation Profile wird um diesen Wert korrigiert So kann g
54. n Link LED LED an Mit AVLN AV Logical Network verbunden LED aus Nicht mit AVLN verbunden Power LED LED an Versorgungsspannung vorhanden LED aus Keine Versorgungsspannung Pilot LED LED an Powerline Signal ist auf die Pilotleitung ge koppelt LED aus Powerline Signal ist auf die Netzleitung Mains gekoppelt Tabelle 4 Bedeutung der LED Anzeigen 18 INSYS Powerline GP Anschl sse 6 Anschl sse 6 1 Anschl sse Vorderseite 00000000 INSYS Powerline GP OOOOOOOO Abbildung 2 Anschl sse auf der Ger tevorderseite Position Bezeichnung 1 Ethernet Anschluss Tabelle 5 Anschl sse auf der Ger tevorderseite 19 Anschl sse INSYS Powerline GP 6 2 Klemmanschl sse Unterseite GND 10 60 VDC max 0 3A Pilot Pilot Pilot Abbildung 3 Anschl sse auf der Ger teunterseite Klemme Bezeichnung Beschreibung on O Om BR W N oN O Om A UU N 1 Reset Reset Eingang 2 GND Ground Masse 3 10 60 VDC Spannungsversorgung 10 V 60 V DC 4 nicht beschaltet 5 Pilot In Eingangssignal Pilotleitung von der Pilotquelle 6 Pilot In Eingangssignal Pilotleitung von der Pilotquelle 7 Pilot Out Ausgangssignal Pilotleitung zur Ladesteckdose 8 Pilot Out Ausgangssignal Pilotleitung zur Ladesteckdose Tabelle 6 Anschl sse auf der Ger teunterseite Um Verschleppungen des Powerline Signals zu minimieren sollt
55. n Transportsch den m ssen auf den Frachtpapieren festgehalten werden Alle Scha densersatzanspr che unverz glich und vor der Installation gegen ber dem Spedi teur dem f r die Lagerung verantwortlichen Unternehmen geltend machen 10 INSYS Powerline GP Sicherheit 2 6 Kennzeichnungen auf dem Produkt Das Typenschild des Produkts befindet sich entweder als Aufdruck oder Aufkleber auf einer Flache des Produkts Es kann unter anderem folgende Kennzeichnungen enthalten die hier naher erlautert sind Handbuch beachten Dieses Symbol weist darauf hin dass das Handbuch des Produkts essentielle Sicherheitshinweise enthalt die unbedingt zu beachten sind Altgerate umweltgerecht entsorgen Dieses Symbol weist darauf hin dass Altgerate getrennt vom Restm ll Uber geeignete Sammelstellen zu entsorgen sind Siehe auch Abschnitt Entsorgung in diesem Handbuch CE Kennzeichnung C Durch die Anbringung der CE Kennzeichnung best tigt der Hersteller dass das Produkt den produktspezifisch geltenden europ ischen Richtlinien entspricht Schutzklasse II Schutzisolierung Dieses Symbol weist darauf hin dass das Produkt der Schutzklasse II entspricht 2 7 Umweltschutz Entsorgen Sie das Produkt sowie die Verpackung gem den entsprechenden Umweltschutzvorschriften Im Abschnitt Entsorgung dieses Handbuchs finden Sie Hinweise zur Entsorgung des Produkts Trennen Sie die Verpackungsbestandteile aus Karton und Papier sowie Ku
56. n Abschnitten der Dokumentation die Beschreibungen von Vorg ngen und Handlungsanweisungen mit konkreten Sicherheitshinweisen versehen Dar ber hinaus gelten die rtlichen Unfallverh tungsvorschriften und allgemeine Sicherheitsbestimmungen f r den Einsatzbereich des Ger ts Erst die Beachtung aller Sicherheitshinweise erm glicht den optimalen Schutz des Personals und der Umwelt vor Gef hrdungen sowie den sicheren und st rungsfrei en Betrieb des Produkts 2 1 Bestimmungsgem e Verwendung Das Produkt dient ausschlie lich zu den aus der Funktions bersicht hervorgehen den Einsatzzwecken Zus tzlich darf das Ger t f r die folgenden Zwecke eingesetzt werden e Einsatz und Montage in einer Ladestation f r Elektrofahrzeuge 2 2 Technische Grenzwerte Das Produkt ist ausschlie lich f r die Verwendung innerhalb der in den Datenbl t tern angegebenen technischen Grenzwerte bestimmt Folgende Grenzwerte sind einzuhalten e Die Umgebungstemperaturgrenzen d rfen nicht unter bzw berschritten werden e Der Versorgungsspannungsbereich darf nicht unter bzw berschritten werden e Die maximale Luftfeuchtigkeit darf nicht berschritten werden und Kondensatbildung muss vermieden werden e Die maximale Schaltspannung und die maximale Schaltstrombelastung d rfen nicht berschritten werden e Die maximale Eingangsspannung und der maximale Eingangsstrom d rfen nicht berschritten werden Sicherheit INSYS Powerline GP
57. n Attenuation Profile to a PEV but the PEV didn t send a Match Request Although another PEV could send a SLAC request until the status message HC STATUS IND Timeout TT EVSE SLAC init i HC STATUS IND Timeout TT EVSE SLAC init CS Abbildung 12 Sequenzdiagramm Status Meldung Timeout TT EVSE match session 44 INSYS Powerline GP Funktion Mit der Statusmeldung Timeout_TT_EVSE_match_join teilt das INSYS Powerline GP der HLE mit dass zwar eine Assoziierung zwischen PEV und EVSE durchgefuhrt wurde aber kein AVLN aufgebaut werden konnte INSYS PEV GP STA Powerline GP HLE I A i System State A Unmatched System State Unoccupied el Ki K ae Ki Ke Pm rom this point the A gt HC_LISTEN_FOR_SLAC_ASSN IND Powerline GP will listen ko for 20s for SLAC Requests froma PEV O HO USTEN FOR SLAC ASSN CNF J l l l l I I l l s I l l l I I Worst case 25s I HC_ATTEN_CALC_RESULT IND SLAC association in process Timeout_TT_EVSE_match_join A System State Unmatched This status message indicates that a PEV wants to establish a link and the Powerline GP already sends the network informations to the PEV However the link AVLN could not be established l I l r l I l I I l I I I l l l
58. n bei dem entspre chenden Ereignis an die HLE gesendet Mit der Statusmeldung HC_STATUS IND System Ready teilt das INSYS Powerline GP der HLE mit dass es bereit ist eine SLAC Assoziierung durchzuf hren Bevor eine SLAC Assoziierung durchgefuhrt werden kann erstellt es einen zufalligen NMK Network Membership Key und setzt somit die Zugangsdaten fur das nachs te AVLN INSYS A Powerline GP Systemstart i Informs the HLE that the System is ready N After this signal you are able to start a SLAC ASSN with the 6 HC_LISTEN_FOR_SLAC_ASSN IND command PEN SEENEN UL SYS_SET_NMK N SET System State Uoccupied HC_STATUS IND System_Ready Pi l l l l l 4 l l l l l l l l l l l l I I I I I I I I I I I I I I j I I I I I i Abbildung 10 Seguenzdiagramm Status Meldung System Ready 42 INSYS Powerline GP Funktion Mit der Statusmeldung Timeout_TT_EVSE_SLAC_ init teilt das INSYS Powerline GP der HLE mit dass keine SLAC Assoziierung zustande kam Nach diesem Timeout reagiert es auf keine SLAC Anfragen mehr INSYS rae Powerline GP HLE I l I N I System State N I Unmatched System State I Unoccupied SN l l I l N Sn N rom this point th
59. n der N he von Gew ssern eingesetzt werden Installieren Sie das INSYS Powerline GP an einem trockenen vor Spritzwasser gesch tzten Ort Schalten Sie die Spannung ab bevor Sie Arbeiten an einem INSYS Powerline GP durchf hren der mit Feuchtigkeit in Ber hrung kam 12 INSYS Powerline GP Sicherheit Kurzschl sse und Besch digung durch unsachgem e Reparaturen und Modifikationen sowie Offnen von Wartungsbereichen gt Brandgefahr und Besch digung des Produkts Das ffnen des Produkts f r Reparaturarbeiten oder Modifikationen ist nicht erlaubt berstrom in der Ger teversorgung Brandgefahr und Besch digung des Produkts durch berstrom gt Sichern Sie den INSYS Powerline GP mit einer geeigneten Sicherung gegen Str me h her als 1 6 A ab berspannung und Spannungsspitzen aus dem Stromnetz Brandgefahr und Besch digung des Ger tes durch Uberspannung gt Installieren Sie einen geeigneten berspannungsschutz Besch digung durch Chemikalien Ketone und chlorierte Kohlenwasserstoffe l sen den Kunststoff des Geh uses und besch digen die Oberfl che des Ger ts gt Bringen Sie das Ger t auf keinen Fall mit Ketonen z B Aceton und chlorierten Kohlenwasserstoffen z B Dichlormethan in Ber hrung 13 Lieferumfang INSYS Powerline GP 3 Lieferumfang Der Lieferumfang fur das INSYS Powerline GP umfasst die im Folgenden aufgef hrten Zubeh rteile Bitte kont
60. nd or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the follow ing acknowledgement This product includes software developed by the University of Califor 68 INSYS Powerline GP Lizenzen nia Berkeley and its contributors 4 Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAM AGE Portions Copyright c 1983 Regents of the University of California All rights reserved Redistribution and use in source and binary forms are permitted provided that the above copy right notice and this paragraph are d
61. ns Copyright c 2001 Daniel Hartmeier All rights reserved 71 Lizenzen INSYS Powerline GP Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of condi tions and the following disclaimer in the documentation and or other materials provided with the distribution THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBU TOR AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE COP YRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUD ING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SER VICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEV ER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Portions Copyright 1989 by Carnegie Mellon Permission to use copy modify and distribute this program for any purpose and w
62. nststoff und f hren Sie sie ber die entsprechen den Sammelsysteme dem Recycling zu 11 Sicherheit INSYS Powerline GP 2 8 Sicherheitshinweise zur elektrischen Installation Der elektrische Anschluss darf nur von autorisiertem Fachpersonal gem den Elektropl nen vorgenommen werden Die Hinweise zum elektrischen Anschluss in der Anleitung beachten ansonsten kann die elektrische Schutzart beeintr chtigt werden Die sichere Trennung von ber hrungsgef hrlichen Stromkreisen ist nur gew hrleis tet wenn die angeschlossenen Ger te die Anforderungen der VDE 0106 T 101 Grundanforderungen f r sichere Trennung erf llen F r die sichere Trennung die Zuleitungen getrennt von ber hrungsgef hrlichen Stromkreisen f hren oder zus tzlich isolieren 2 9 Grundlegende Sicherheitshinweise Lebensgef hrliche Betriebsspannung Lebensgefahr durch Stromschlag Vor der Montage die Spannungsversorgung des Schaltschranks abschalten und gegen Wiedereinschalten sichern Offen liegende elektrische Komponenten Lebensgefahr durch Stromschlag Vor der Montage die Spannungsversorgung des Schaltschranks abschalten und gegen Wiedereinschalten sichern N sse und Fl ssigkeiten aus der Umgebung k nnen ins Innere des INSYS Powerline GP gelangen Lebensgefahr durch Stromschlag bei Ber hrung sowie Brandgefahr und Besch digung des Produkts Das INSYS Powerline GP darf nicht in nassen oder feuchten Umgebungen oder direkt i
63. nzdiagramm Status Meldung System Ready 42 Abbildung 11 Seguenzdiagramm Status Meldung Timeout TT EVSE SLAC init 43 Abbildung 12 Seguenzdiagramm Status Meldung Timeout TEVSE Mmaten 8888lon 22 2 Haan 44 Abbildung 13 Sequenzdiagramm Status Meldung Timeout_TT_EVSE_match_join Ze 45 Abbildung 14 Sequenzdiagramm Status Abfrage HC STATUS REO 46 Abbildung 15 AttenRXEVSE eristamatu tatt au an 52 74 INSYS Powerline GP Stichwortverzeichnis 15 Stichwortverzeichnis Allgemenes een 6 Alternative Ergebnisse aensnaaann 8 Altgerates sais tras GER 54 ANKIEM MENG uksi aka 23 Bestimmungsgem e Verwendung 9 Betriebsspannung s sssssssseesrrreenereee 12 Brand Geraint EE 13 Demontieren nnnmmmannnena 23 DIN Hutschiene 25 28 Eingangsspannung 15 le EE 9 Elektrische Installation 12 Ethernet Anschluss 19 Fl ssigkeiten m 12 24 Formatierungen sssessesrreenrrreerree ree 8 GENAUSO s orena See deed geg Gees 13 Gew hrleistungsbestimmungen 6 GON ZW E 9 Grundlegende Sicherheitshinweise 12 ee SS ks 8 H tschiene aan 26 Installation sta 24 Kennzechnung ree 7 Kurzschluss erence en 13 24 53 LNK CED EE 17 Masse ee 20 Mod kant ash 13 53 leie ME EE 23 KEE 12 24 Normen 222er 16 Oberflache 13 Personali rctra
64. on octets Dest MAC 6 Source MAC of HC_LISTEN_FOR_SLAC_ASSN IND Source MAC 6 Powerline GP MAC Ethertype 2 Ethertype Oxabba Reserved 1 Reserved 0x00 Type 2 HC_LISTEN_FOR_SLAC_ASSN CNF Type 0x0b02 Result 1 Result of HC_LISTEN_FOR_SLAC_ASSN IND 0x00 failure 0x01 success Tabelle 13 HC_LISTEN_FOR_SLAC_ASSN CNF Nachricht Funktion INSYS Powerline GP 9 4 2 2 HC_STOP_LISTEN_FOR_SLAC_ASSN System State auf Unoccupied setzen und alle moglicherweise laufenden Associa tions stoppen Vorbedingung System State darf nicht Unoccupied sein Field Field size Definition octets Dest MAC 6 Powerline GP MAC Source MAC 6 HLE MAC Ethertype 2 Ethertype Oxabba Reserved 1 Reserved 0x00 Type 2 HC_STOP_LISTEN_FOR_SLAC_ASSN IND Type 0x0b03 Reserved 1 Reserved 0x00 Tabelle 14 HC_STOP_LISTEN_FOR_SLAC_ASSN IND Nachricht Bestatigung von HC_STOP_LISTEN_FOR_SLAC_ASSN IND Ergebnis ist ein Fehler wenn System State bereits Unoccupied ist Field Field size Definition octets Dest MAC 6 Source MAC of HC_STOP_LISTEN_FOR_SLAC_ASSN IND Source MAC 6 Powerline GP MAC Ethertype 2 Ethertype Oxabba Reserved 1 Reserved 0x00 Type 2 HC_STOP_LISTEN_FOR_SLAC_ASSN CNF Type 0x0b04 Result 1 Result of HC_STOP_LISTEN_FOR_SLAC_ASSN IND 0x00 failure 0x01 success 0x02 System State is already Unoccupied Tabelle 15 HC STOP LISTEN FOR
65. onsequence you may not distribute the Program at all For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Pro gram If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances 59 Lizenzen INSYS Powerline GP It is not the purpose of this section to induce you to infringe any patents or oth er property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution sys tem which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the au thor donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a con sequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries ei ther by patents or by copyrighted interfac
66. ors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE INSTITUTE 69 Lizenzen INSYS Powerline GP OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPE CIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIM ITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Portions Copyright c 1997 Yen Yen Lim and North Dakota State University All rights re served Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of condi tions and the following disclaimer in the documentation and or other materials provided with the dist
67. r written permission THIS SOF OR IMPLI WARRANT I ARE DISC Ka ED WARRANTI TWARE T IS PROVIDED BY THE AUTHOR AS IS AND ANY EX ES INCLUDING BUT NOT LIMITED TO THE IM T PRESS PLIE Gl ES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR AIMED IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY POS E DIRECT DAMAGE GOODS INTERR WHETHE R Daonr PTION bal INDIRECT INCIDENTAL SPECIA EXEMPLARY OR CONSEQUENTIA INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTI SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY IN CONTRACT STRICT LIABILITY OR TORT INCLUDING Ir Gl U NEG IGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This file is part of the uIP TC P IP stack 65 Lizenzen INSYS Powerline GP devolo AG Ay 66 Copyright c 2012 devolo AG Aachen Germany All rights reserved This Software is part of the devolo GreenPHY SDK Usage in source form and redistribution in binary form with or without modification are permitted provided that the fo
68. ribution 3 All advertising materials mentioning features or use of this software must display the follow ing acknowledgement This product includes software developed by Yen Yen Lim and North Dakota State University 4 The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WAR RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DI RECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTER RUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHER WISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF AD VISED OF THE POSSIBILITY OF SUCH DAMAGE Portions Copyright c 1993 by Digital Equipment Corporation Permission to use copy modify and distribute this software for any purpose with or without fee is hereby granted provided that the above copyright notice and this permission notice appear in all copies and that the name of Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the
69. rollieren Sie ob alle angegebenen Zubeh rteile in Ihrem Karton enthalten sind Sollte ein Teil fehlen oder besch digt sein so wenden Sie sich bitte an Ihren Distributor gt INSYS Powerline GP gt INSYS Support CD mit Benutzerhandbuch 14 INSYS Powerline GP Technische Daten 4 Technische Daten 4 1 Physikalische Merkmale Lebensgefahrliche Betriebsspannung Lebensgefahr durch Stromschlag Vor handwerklichen Arbeiten am INSYS Powerline GP die Spannungsversorgung abschalten und gegen Wiedereinschalten sichern Uberspannung und Spannungsspitzen aus dem Stromnetz Brandgefahr und Besch digung des Ger tes durch Uberspannung Installieren Sie einen geeigneten Uberspannungsschutz Die angegebenen Daten wurden bei nominaler Eingangsspannung unter Volllast und einer Umgebungstemperatur von 25 C gemessen Die Grenzwerttoleranzen unterliegen den blichen Schwankungen Physikalische Eigenschaft Betriebsspannung Wert minimal 10 V DC maximal 60 V DC Spannung am Powerline Anschluss 0 240 V 50 Hz Leistungsaufnahme Ruhe 1 5 W Leistungsaufnahme Verbindung 2 W Gewicht 160 g Abmessungen Breite x Tiefe x Hohe 45 x 110 x 75 mm Temperaturbereich 20 C 55 C Maximale zulassige Luftfeuchtigkeit 95 nicht kondensierend Schutzklasse Gehause IP40 Schraubklemmen IP20 Tabelle 1 Physikalische Eigenschaften 15 Technische Daten INSYS Powerline GP
70. romoting the sharing and reuse of software generally 60 INSYS Powerline GP Lizenzen NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICA BLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITH OUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUD ING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABIL ITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCI DENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INA BILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the grea
71. test possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the program s name and an idea of what it does Copyright C yyyy name of author This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 2 of the License or at your option any later version 61 Lizenzen INSYS Powerline GP This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public Li cense along with this program if not write to the Free Soft ware Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail If the program is interactive make it output a short notice like this when it starts in an interactive mode Gnomov
72. ugung e dlancontrol extended security npw to nmk P lt NetworkPassword gt lt NetworkPassword gt Netzwerkpasswort Erzeugen eines hexadezimalen NMK aus einem Netzwerkpasswort e cfgcontrol extended security set nmk i lt PIBFile gt k lt NMK gt lt PIBFile gt Name der zu bearbeitenden PIB Datei lt NMK gt NMK als hexadezimaler Wert Schreiben eines NMK in eine PIB Datei Gehen Sie wie folgt vor um die entsprechenden Vorg nge durchzuf hren e Erzeugen des NMK aus dem Netzwerkpasswort So erzeugen Sie einen NMK aus einem Netzwerkpasswort gt Das Netzwerkpasswort ist bekannt hier emobility 1 Geben Sie den Befehl wie folgt in die Kommandozeile ein C gt dlancontrol_extended security npw_to_nmk P emobility v Der NMK wird in hexadezimaler Form angezeigt 2440fe29048823c333dd2c7aee2c8e86 A Damit haben Sie den NMK erzeugt e Schreiben des NMK in die PIB Datei So schreiben Sie einen NMK in eine PIB Datei Der NMK ist bekannt hier 24d0fe29048823c333dd2c7aee2c8e86 1 Geben Sie den Befehl wie folgt in die Kommandozeile ein c gt cfgcontrol_extended security set_nmk i new pib k 24d0fe29048823c333dd2c7aee2c8e86 A Der NMK wird in die PIB Datei geschrieben 33 Funktion INSYS Powerline GP 9 2 2 SLAC f r EVSE aktivieren SLAC Signal Level Attenuation Characterization kann durch Einstellung des Cent ral Coordinators auf CCo always und die Aktivierung von SLAC SLAC enable for EVSE verwend
73. uplicated in all such forms and that any documentation ad vertising materials and other materials related to such distribution and use acknowledge that the software was developed by the University of California Berkeley The name of the University may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED AS IS AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE Portions Copyright c 1995 1996 1997 Kungliga Tekniska H gskolan Royal Institute of Technology Stockholm Sweden All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of condi tions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the follow ing acknowledgement This product includes software developed by the Kungliga Tekniska H gskolan and its contributors 4 Neither the name of the University nor the names of its contribut
74. verbunden und sendet SLAC Parameter Requests 3 Kommando HC LISTEN FOR SLAC ASSN IND an das Modem senden Wurde das SLAC Protokoll erfolgreich durchlaufen wird das durch die Aktivierung der Link LED auf der Front angezeigt Der Erhalt einer Validation Request Nachricht vom PEV BCB Toggle wird vom Modem immer mit not required beantwortet Funktion INSYS Powerline GP 9 4 1 SLAC Interface Das INSYS Powerline GP ist in der Lage Kommandos ber die Ethernet Schnittstelle entgegen zu nehmen Ausgehende Nachrichten werden ebenfalls uber die Ethernet Schnittstelle gesendet Der Empfanger ausgehender Nachrichten wird im Weiteren als Higher level Entity HLE bezeichnet 9 4 1 1 SLAC starten Das Kommando HC_LISTEN_FOR_SLAC_ASSN IND versetzt das INSYS Powerline GP in die Bereitschaft eine SLAC Assoziierung durchzuf hren INSYS i i PEV GP STA Pi line GP HLE The time until a link is established depends mostly on the connected PEV With the right settings on the PEV side itis possible to run the SLAC Process in 2 3s System State Unmatched H System State Unoccupied I e From this point the PLC Rx AR HC_LISTEN_FOR_SLAC_ASSN IND l l l l l sy S N a l s 1 l l l I l GP listens 20s for SLAC Requests from a PEV ee HC_LISTEN_FOR_SLAC_ASSN CNF This status message is produced every time the I Powerline G

Download Pdf Manuals

image

Related Search

Related Contents

Guide de sélection des projets e  Model 5220 User`s Manual  Getting Started with Your GPIB-PCII/IIA and the GPIB Software for    リモート・レプリケーションに完全労ざ応  取扱説明書  OXID OIL  CLC Genomics Server      

Copyright © All rights reserved.
Failed to retrieve file