Home

Samsung 2232MW User Manual

1. L When you drop the product or the case is broken turn the power off and disconnect the power cord Contact a Service Center e Otherwise this may result in electric shock or fire 3 If thunder or lightening is occurring do not touch the power cord or antenna cable e Otherwise this may result in electric shock or fire L Do not try to move the monitor by pulling only the wire or the signal cable e Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable L Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables e Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable L Make sure that the ventilating opening is not blocked by a table or curtain e Otherwise it may result in fire due to an increase in the internal tem perature CJ Do not place any containers containing water vases flowerpots med icines as well as any metal on the product e If water or a foreign material enters the product disconnect the power cord and contact a Service Center e This may result in a product malfunction electric shock or fire L Do not use or keep combustible spray or flammable material near the product e Otherwise this may result in an explosion or fire LJ Do not insert any metal such as chopsticks coins pins and steels or inflammable obje
2. Name the input device connected to the input jacks to make your input source selection easier 1 PC 2 DVI 3 AV 4 S Video 5 Component 6 HDMI 36 Adjusting the Monitor Picture Available Modes DpPc DVI itv El Aav El s video 5 Component e HDMI Note The default setting may different depending on the selected Input Mode input signal source selected in External Input List and the selected resolution PC DVI Mode MagicBright MagicBright is a new feature providing the optimum viewing environment depending on the contents of the image you are watching Currently five different modes are available Entertain Internet Text Dynamic Contrast and Custom Each mode has its own pre configured brightness value You can easily select one of five settings by simply pressing the MagicBright control button 1 Entertain High Brightness For watching motion pictures such as a DVD or VCD 2 Internet Medium Brightness 37 Custom Adjusting the Monitor For working with a mixture of images such as texts and graphics Text Normal Brightness For documentations or works involving heavy text Dynamic Contrast Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If
3. Safety Instructions Notational Power Note These safety instructions must be followed to ensure your safety and prevent property damage Make sure to read the instructions carefully and use the product in the correct manner o Warning Caution N _ Otherwise it may result in death or personal injury Otherwise it may result in personal injury or property damage O Notational Conventions Important to read and under Prohibited stand at all times Do not disassemble Do not touch Disconnect the plug from the outlet Ground to prevent an electric shock GAS A When not used for extended period of time set your computer to DPM If using screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions L Do not use a damaged power cord or plug or a damaged or loose power outlet e Otherwise this may result in electric shock or fire F L Do not touch the power plug with wet hands when removing or plug i ging the plug into the outlet Q R e Otherwise this may result in electric shock po LJ Make sure to connect the power cord to a grounded power outlet v AN e Otherwise it may result in electric shock or personal injury Installation AG LT Ka ki daga Safety Instructions L Ensure that the power plug is plugged into the power outlet
4. clock speed 40 Adjusting the Monitor 3 Sharpness When the SOURCE is set to DVI only this function operates Adjusts the picture sharpness 4 Position Adjusts the screen location horizontally and vertically 41 Adjusting the Monitor The values of Fine Coarse Position are adjusted automatically By changing the resolution in the control panel auto function is performed Available in PC Mode Only 42 Adjusting the Monitor Size LJ You can switch the Size 1 Wide 2 4 3 PIP Picture You can adjust the PIP Screen Settings 1 Contrast Adjusts the Contrast of the PIP window on the screen 2 Brightness Adjusts the Brightness of the PIP window on the screen 43 Adjusting the Monitor 3 Sharpness Adjusts the Sharpness of the PIP window on the screen 4 Colour Adjusts the Colour of the PIP window on the screen Available PIP ON TV AV S Video Component HDMI Mode Available Modes DpPc DVI filtv Elav H S Video 6 Component HDMI Note The default setting may be different depending on the selected Input Mode input signal SOURCE selected in External Input List and the selected resolution Mode Uc Eis The Monitor has four automatic picture settings Dynamic Standard Movie and Custom that are preset at the factory You can activate either Dynamic Standard Movie or Custom You can select Custom w
5. http www samsung com TURKEY 444 77 11 http www samsung com U A E 800 SAMSUNG 726 7864 http www samsung com 8000 4726 Terms Sync Signal Sync Synchronized Signals refer to the standard signals that are required to display desired colors on the monitor They are divided into Vertical and Horizontal Sync Signals These signals display normal color images by the set resolution and frequency Types of Sync Signals Separate This is ascheme of transmitting individual vertical and hori sync signals to the monitor Composite This is a scheme of combining vertical and horizontal syr nals into one composite signal and transmitting it to the mi The monitor displays the color signals by separating the c site signal into original color signals Dot Pitch The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The distance be tween two dots of the same color is called the Dot Pitch Unit mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per second this is regarded as 60 Hz Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle The in verse number of th
6. Not available in all loca tions Cables D Sub Cable DVI Cable Power Cord Introduction Others TI Remote Control Batteries AAA X 2 Cleaning Cloth Not available in all loca tions Sold separately Earphones Headphones RCA Cable Video Yellow TV Antenna Cable Component Pp Pp Y Cable Audio Red and White Coaxial Cable RCA to stereo for PC cable S VIDEO Cable 10 Introduction Your Monitor Front MENU Activates a highlighted menu item 1 SOURCE Push the SOURCE button to change the input signal source Changing the source is only allowed for external devices connected to the product at the time To switch Screen modes PC gt DVI gt TV gt AV gt S Video gt Component gt HDMI gt gt Click here to see an animation clip 2 MENU Use this button for open the on screen menu and exits from the menu screen or closes screen adjustment menu voL Moves from one menu item to another horizontally or adjusts selected menu val ues Adjusts the audio volume actv Moves from one menu item to another vertically or adjusts selected menu values In TV mode selects TV channels Remote Control Sensor Aim the remote control towards this spot on the monitor O Power button 5 Power indicator Use this button for turning the product on and off 11 Introduction This will enable you to see the overall power status of the system For
7. choose your monitor model in the model list and click the Next button insta ii From Disk Hardware Update Wizard Select the devier diver you want bo inaladi bor thie hardisaan iiser Ihe manu schuter s metalation dak and then mane sue thal the conect dive t selected below Lx ao Sohn the marula a oda of pour hadaa reson ad an h Ht IN pi have a dak that contend ih darai pau sard bo imba chek Hawa Dok Modi Samsung sax Copy manulachuner s flies Hom iy This driver ix mot digitally signed Tal ma eh duyan marina ik moaalari DN Cas CEJ Coe If you can see following message window then click the Continue Anyway button Then click OK button Hardware Installation A The software pou sre installing few this hardware Samsung sara has not passed windows Loge beating lo wenly its compabbdiy sath inoa PP Tal ms wake thee belie te reper Continuing your installation of this sofware may impair or destabilize the corect operashon of your system ether immediately of m the hatune Hierosol shoongly commends thal pou Hop this inttallalbon now and contact th hardware vendo for software thal has passed Windows Loge testing Continue Arpwsy STOP Installation Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage 28 10 Using the Software http www samsung com Click the Clo
8. firmly and correctly e Otherwise this may result in fire L Do not forcefully bend or pull the power plug and do not place any heavy material on it e Otherwise this may result in fire 3 Do not connect multiple appliances to the same power outlet e Otherwise this may cause fire due to overheating L Do not disconnect the power cord while using the product e Otherwise this may result in damage to the product due to electric shock L To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily op erable e This may cause electric shock or fire J Use only the power cord provided by our company Do not use the provided power cord of another product e Otherwise this may result in fire or electric shock Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust high or low temperatures high humidity and exposed to chemical substances and where it operates for 24 hours such as at airports train stations etc Failure to do so may cause serious damage to your monitor L Do not drop the monitor when moving it e This may cause damage to the product or the person carrying it E a L Ensure that at least two persons lift and move the product e Otherwise it may be dropped and cause personal injury and or dam age the product L When installing the product in a cabinet or rack make s
9. fit of ciare driver on my computer Peon fied amdi een reali ime emer pea eel Ror abren r aed all arre eee m an a bangang m Ban Aa 8 Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK make gure Ghat the come dhee a misdied bakra Skert she dinaan drr you anal tan drial fee thas harhar Pa aria dr Sjaj pi piy Paanan a Pr chee Feel Fy apr pal Sorters Pa Soar pie wares el aimh Fares emt inte aren Fl Marian 9 Select the model that matches your monitor from the list of monitor models on the screen and click Next Select the device driver you want to intall few this hardware ami Pa ge haha pl piar Paglia aro Paes fle tae Pope aii Paa ie Kal Pei Ere ping ad la be Hera ian 10 Click Close gt Close gt OK gt OK on the following screens displayed in sequence Aiea haa subo dh uplod your dhe solar LS Sateueg eee Ta ran in pail FP even Hag Tip kaaa a ae aa a a Diba daraga Alis pe Pa ere acl bach be peal ma an a pried deren Taal Pa jae rare 26 Using the Software o Drag the cent to match your monitor tide modes that his monitor cannot cesplay tarara rsa hr nile eee ath ges G7 This os my main monitor i E Extend the desktop onto thet mansar anced Settings PETTINE ere Peres i me Ca Microsoft Windows XP Operating System 1 Insert CD into the CD ROM drive 2 Click Start g
10. for a long time This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention E3 Warranty Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty 68 Information What is Image retention During normal operation of a LCD panel pixel image retention doesn t occur However if the same image is displayed for a long time a slight difference in electric charge accumu lates between the two electrodes which encase the liquid crystal This may cause the liquid crystal to build up in a certain areas of the display Thus the previous image is retained when switching to a new video image All display products including LCD are subject to image retention This is not a product defect Please follow the suggestions below to protect your LCD from image retention o Power Off Screen Saver or Power Save Mode Ex e Turn the power off when using a stationary pattern e Turn the power off for 4 hours after 20 hours in use e Turn the power off for 2 hours after 12 hours in use e Use a Screen saver if possible e Screen saver in one color or a moving image 1s recommended e Set the Monitor to power off with the PC Display Properties Power Scheme Suggestions for specific applications Ex Airports Transit Stations Stock Markets Banks and Controlling Systems We recom mend that you follow set up of your display system program as below ba Disp
11. inconsistent Color image is distorted with dark shadows White color is poor Adjust color using Custom under OSD Color Adjustment menu Power Indicator blinks green The monitor is currently saving the changes made in settings to the OSD memory Screen is blank and power indicator light is steady green or blinks every 0 5 or 1 seconds The monitor is using its power management system press a key on the keyboard The screen is blank and is blinking 62 A Troubleshooting If you see the TEST GOOD message on the screen when you press the MENU button check the cable connection between the monitor and the computer to ensure that the connector is properly connected 3 Problems related to Audio Note Problems related to audio signals and their solutions are listed below Q A No sound Ensure that the audio cable is firmly connected to both the audio in port on your monitor and the audio out port on your sound card Refer to the Connecting the monitor Check the volume level Refer to the Volume The sound level is too low Check the volume level Refer to the Volume If the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software program Sound is too high pitched or too low pitched Adjust the Treble and Bassto appropriate level 4 Problems related to Remote Control Note Problems related to the remote control and their solutio
12. returned for recycling purposes The customer is responsible for returning the used or rechargeable batteries for recycling purposes as the consumer e The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery L When lifting up or moving the monitor do not lift the monitor upside down while holding only the stand e This may cause your monitor to fall and become damaged or cause personal injury 3 Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater e This may reduce the lifetime of the product and may result in fire L Do not drop any objects onto the product or cause any impact to the product e Otherwise this may result in electric shock or fire L Do not use a humidifier or kitchen table near the product e Otherwise this may result in electric shock or fire LJ When there is a gas leak do not touch the product or the power plug but ventilate immediately e Ifa spark occurs it may cause an explosion or fire J If the product has been turned on for a long time the display panel becomes hot Do not touch it e Keep the small accessories in a location out of the reach of children Safety Instructions L Be careful when adjusting the angle of the product or the height of the stand e This may result in personal injury as your hand or finger
13. standard factory settings 2 Music Choose Music when watching music videos or concerts 3 Movie 47 Adjusting the Monitor Choose Movie when viewing movies Speech Choose Speech when watching a show that is mostly dialogue 1 e news Custom Choose Custom if you want to adjust the settings according to personal preference Custom all Fi The sound settings can be adjusted to suit your personal preference L Bass Emphasize low frequency audio Treble Emphasize high frequency audio Balance Allows you to adjust the sound balance between the left and right speakers You can hear the sound even when the sound value is set to 0 48 Adjusting the Monitor Auto Volume Lai Eis Reduces the differences in volume level among broadcasters Off e On Sound Select Li You can select either Main or Sub when PIP is On 1 Main 2 Sub Available PIP ON 49 Adjusting the Monitor Channel Available Modes pPc DVI fitv Blav El s video 6 Component HDMI Note The default setting may different depending on the selected Input Mode input signal source selected in External Input List and the selected resolution Auto Store You can scan the frequency ranges available on your television in your area and store all the channels found automatically 50 Adjusting the Monitor Manual Store You can scan the frequency ranges available on your television in you
14. the best operating conditions and monitor settings In most cases the monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with preci sion of Ippm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 5 292 000 Note Design and specifications are subject to change without prior notice pa Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor to low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM com
15. the known drivers for this device so that I can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click the Open button then click OK button 29 10 Using the Software Choose your monitor model and click the Next button then click Next button Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button Microsoft Windows Millennium Operating System l 2 10 11 Click Start Setting Control Panel Double click the Display icon Select the Settings tab and click Advanced Properties button Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A D driver then click OK button Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dia logue box Microsoft Windows NT Operating System l Pi Click Start Settings Control Panel and then double click Display icon In Display Registration Information wind
16. www samsung com n1l 0 10 Min 815 56 480 0 801 801 881 022 607 93 33 80820 SAMSUNG 726 7864 0800 SAMSUNG 726 7864 902 10 11 30 0771 400 200 0800 SAMSUNG 726 7864 0845 SAMSUNG 7267864 CIS 800 7267 800 7267 8 800 77777 8 10 800 500 55 500 00 800 500 55 500 8 800 555 55 55 8 10 800 500 55 500 8 800 502 0000 8 10 800 500 55 500 Asia Pacific 1300 362 603 800 810 5858 010 6475 1880 3698 4698 3030 8282 1800 110011 0800 112 8888 0120 327 527 1800 88 9999 0800 SAMSUNG 726 7864 http www samsung com no http www samsung com pl http www samsung com pt http www samsung com sk http www samsung com http www samsung com se http www samsung com ch http www samsung com http www samsung ee http www samsung com lv http www samsung It http www samsung kz http www samsung ru http www samsung com http www samsung uz http www samsung com http www samsung com http www samsung com hk http www samsung com http www samsung com http www samsung com jp http www samsung com my http www samsung com nz 1800 10 SAMSUNG 726 7864 http www samsung com ph 1800 SAMSUNG 726 7864 1800 29 3232 02 689 3232 73 http www samsung com http www samsung com Appendix Asia Pacific TAIWAN 0800 329 999 http www samsung com tw VIETNAM 1 800 588 889 http www samsung com Middle East amp Africa SOUTH AFRICA 0860 SAMSUNG 726 7864
17. 29 78 75 VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 VESA 1280 x 1050 64 674 59 883 119 000 VESA 1680 x 1050 64 674 59 883 119 000 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz 67 Information For Better Display 63 Adjust the computer resolution and screen injection rate refresh rate on the computer as described below to enjoy the best picture quality You can have an uneven picture quality on screen 1f the best picture quality 1s not provided for TFT LCD e Resolution 1680 x 1050 e Vertical frequency refresh rate 60 Hz TFT LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm one millionth and above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without any problems e For
18. V Devices Connecting Headphone The monitor has AV connection terminals to connect AV input devices like DVDs VCRs or Cam corders You may enjoy AV signals as long as the monitor is turned on You may connect your headphones to the monitor aag Id 1 Input devices suchas DVD VCR or Camcorder are connected to the VIDEO or S VIDEO terminal of the monitor using the Video or S Video cable 2 Connect the port of the DVD VCR DVD DTV Set Top Box to the R AUDIO L port of the monitor 19 Connections 3 Connect your headphones to the Headphone connection terminal 4 Then start the DVD VCR or Camcorders with a DVD disc or tape inserted 5 Select AV or S Video using the SOURCE Connecting TV Note You may view television programs on the monitor if it is connected to an antenna or CATV cable without installing any separate TV reception hardware or software on your computer 1 Connect the CATV cable or TV antenna cable to the ANT IN port on the rear side of the monitor Make sure to use a TV antenna cable sold separately as the antenna cable e When using an interior antenna terminal Check the antenna terminal on the wall first and connect the antenna cable e When using an outdoor antenna If you are using an outdoor antenna use a professional for installation if possible e To connect the RF cable to the antenna input terminal Keep the copper wire portion of the RF cable straight 2 Turn on the moni
19. a skocilova 4 14000 Praha 4 DENMARK EIRE FINLAND FRANCE 70 70 19 70 0818 717 100 030 6227 515 3260 SAMSUNG 0 15 Min 08 25 08 65 65 0 15 Min T2 http www samsung com http www samsung com ca http www samsung com http www samsung com ar http www samsung com http www samsung com cl http www samsung com co http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com at http www samsung com be http www samsung com cz http www samsung com dk http www samsung com ie http www samsung com fi http www samsung com GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN SWITZERLAND U K ESTONIA LATVIA LITHUANIA KAZAKHSTAN KYRGYZSTAN RUSSIA TADJIKISTAN UKRAINE UZBEKISTAN AUSTRALIA CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA NEW ZEALAND PHILIPPINES SINGAPORE THAILAND Appendix Europe 01805 SAMSUNG 726 7864 http www samsung com 0 14 Min 06 80 SAMSUNG 726 7864 800 SAMSUNG 726 7864 0035 0 2 261 03 710 http www samsung com http www samsung com http www samsung com be 0900 SAMSUNG 726 7864 http
20. ay result in electric shock or fire r Q CJ Ensure that children do not hang onto the product or climb up onto the UDN product SSM m5 e The product may fall and cause personal injury or death L If you do not use the product for a long period of time disconnect the Hi power cord from the power outlet Si Otherwise this may result in overheating or fire due to dust and may result in fire due to electric shock or leakage L Do not place any heavy items or toys or confectionery such as cookies etc that may attract the attentions of children onto the product pA e Your children may hang onto the product causing it to fall and this may result in personal injury or death Safety Instructions O When removing batteries from the remote control ensure that the children do not swallow the batteries Keep the batteries out of children s reach e Ifthe batteries are swallowed see a doctor immediately When replacing batteries place the batteries in the correct polarity position as indicated on the battery holder e The incorrect polarity may cause a battery to break or leak and may cause fire injury or contamination damage J Use only specified standard batteries Do not use new and used bat teries together e This may cause a battery to break or leak and may cause fire injury or contamination damage J The batteries and rechargeable batteries are not ordinary refuse and must be
21. benefits of CD and LD to implement a high resolution quality which en ables the user to enjoy clearer images An enhanced broadcasting technology to process digital video signals using a set top box which implements a high resolution and clearer digital images on the screen This derives from artificial satellite technology that amplifies weak signals even in poor reception areas for sharper images A connection part that is used to link a Wide antenna cable feeder cable to the TV 13 English Caption Caption Set ting Multiplex Broadcasting A2 BTSC EIAJ Correct Disposal Appendix A kind of language selection feature that provides English subti tles caption or character information services from broadcasting services ex AFKN or video tapes marked CC and which are especially useful for studying English This enables the user to enjoy the broadcasting service in both Korean and foreign original language as well as in stereo mode This system uses two carriers to transmit voice data Countries such as South Korea and Germany use this system Broadcast Television System CommitteeThe stereo broadcasting system that is used in most of the countries that have adopted the NTSC system including the United States Canada Chile Vene zuela and Taiwan It also refers to the organization that has been organized to promote its development and management Electronic Industries Association of Japan Corr
22. cts such as matches or paper inside the product through the ventilating openings input and output terminals etc e If water or foreign material enters the product disconnect the power cord and contact a Service Center e Otherwise this may result in electric shock or fire Safety Instructions a LI When using a fixed screen for a long time an afterimage or stain may Q occur e If you are not using your product for a long period of time put it into sleep mode or use a moving screen saver 3 Set a resolution and frequency appropriate to the product e Otherwise your eyesight may be damaged L Keep the volume at a comfortable level when using the headphones Rj Fy T PIN sa e Excessively loud volume level may damage hearing o L If you continually move closer to the product screen your eyesight may be failing LJ To ease eye strain take at least a five minute break after every hour of using the monitor i O Do not install it in an unstable location such as an unstable rack or Bp uneven surface or a location exposed to vibrations L e Otherwise it may fall and cause personal injury and or damage the product e If you use the product in a location exposed to vibrations it may damage the product and result in fire EF LJ When moving the product turn the power off and disconnect the power Le plug antenna cable and all the cables connected to the product as e Otherwise it m
23. e Horizontal Cycle is called Horizontal Fre quency Unit kHz Interlace and Non Interlace Showing the horizontal lines of the screen from the top to the bot Methods tom sequentially is called the Non Interlace method while show ing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Interlace method is the same as that used in TVs Plug amp Play This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange informa tion automatically This monitor follows the international standard VESA DDC for the Plug amp Play function Resolution The number of horizontal and vertical dots used to compose the screen image 1s called the resolution This number shows the ac 74 RF Cable Satellite Broadcasting Sound Balance Cable TV CATV S Video VHF UHF Channel Fine Tuning External Device Input DVD DTV Broadcasting Digital TV Broadcasting LNA Low Noise Amplifier Antenna Converter Appendix curacy of the display A high resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1680 1920 x 1050 1200 this means the screen is composed of 1680 1920 horizontal dots horizontal resolution and 1050 1200 vertical lines vertical resolution A round signal cable gene
24. e power cord and clean it softly with a dry cloth e Do not use chemicals such as wax benzene alcohol thinner mos quito repellant lubricant or cleaner These may change the appear ance of the product surface and peel off the indication labels on the product J Since the product housing is easily scratched make sure to use the specified cloth only e Use the specified cloth adding only a little water As the product may be scratched if there is any foreign material on the cloth make sure to shake it thoroughly before using it L When cleaning the product do not spray water directly onto the main body of the product e Ensure that water does not enter the product and that it is not wet e Otherwise this may result in electric shock fire or a malfunction LJ The product is a high voltage product Ensure that users do not disas semble repair or modify the product themselves e Otherwise this may result in electric shock or fire If the product needs to be repaired contact a Service Center oy SB Y Q15 s KUA Mp Safety Instructions J If there is a strange smell or a strange sound or smoke is coming from the product disconnect the power plug immediately and contact a Service Center e Otherwise this may result in electric shock or fire 3 Do not place this product in a location exposed to moisture dust smoke water or in a car e Otherwise this may result in electric shock or fire
25. ect Disposal of This Product Waste Electrical amp Electronic Equipment Europe only aT X4 lt O Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indi cates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrol led waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustaina ble reuse of material resources CT Household users should contact either the retailer where they purchased this product or their local government of fice for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This prod uct should not be mixed with other commercial wastes for disposal Authority Information in this document is subject to change without notice 2008 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or con sequential damages in connection with the furnishing performance or use of this mater
26. ect the opposite Jack to the HDMI PC DVI AUDIO IN terminal of the monitor 3 Then start the DVD with a DVD disc inserted 4 Select HDMI using the SOURCF button Using the Stand Folding the base You can tilt the monitor upwards at an angle of 0 to 18 22 Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown here Internet web site http www samsung com Worldwide Installing the Monitor Driver Automatic 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button a SAMSUNG monitor installer Select the display sdapter on which you wand lo intel te monte EDH 9520 Plug and Pim Monica Sale the mordar ahich you Nani bo inatali 4 If you can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP 2000 Operating System Hardware Installation a The software pou are installing for this hardware Samsung sasa has not passed Windows Logo testing to wenly ite compahbdiy wath Windows P Tell ma why thes besting 15 imputari Continui
27. example the number of TFT LCD sub pixels contained in this product are 5 292 000 ka When cleaning the monitor and the panel outside please apply the recommended small amount of cleaner by using a soft cloth to polish Do not force the LCD area but rub softly If excessive force is applied you may stain it If you are not satisfied with the picture quality you can get better quality of picture by performing the Auto Adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after the automatic adjustment use the Fine Coarse adjustment func tion Ga When viewing a fixed screen for an extended period of time a residual image or blur riness may appear Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time G3 Do not display a still image such as on a video game or when hooking up a DVD to this LCD TV on the Color TFT LCD Thin Film Transister Liquid Crystal Display panel for a long time as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention reduce the degree of brightness and con trast of this screen when displaying a still image PRODUCT INFORMATION Image Retention Free LCD Monitors and TVs may have image retention when switching from one image to another espe cially after displaying a stationary image
28. he warning message below appears and disappears after one minute The user must adjust the frequency within that one minute Not Optimum Mode Recommended Mode zzz Wars HZ Note Refer to Specifications gt Preset Timing Modes for the resolutions or frequencies that are supported by the monitor 3 Display Adapter Driver Note Display adapter refers to the computer video card driver 59 Troubleshooting If the adapter is not properly set you cannot adjust resolution frequency or color and you cannot install the monitor driver 1 Checking Adapter Driver Click Start gt Settings gt Control Panel gt Display gt Settings gt Advanced gt Adapter If Default or a wrong product model is indicated it means that the adapter driver is not properly installed Install the adapter driver again according to the information provided by the computer or video card manufacturers 2 Installing Adapter Driver Note The instructions given below are for general circumstances For specific issues contact the relevant computer or video card manufacturers 1 Click Start gt Settings gt Control Panel gt Display gt Settings gt Advanced gt Adapter 5 Update Driver gt Next gt Display a list of the known drivers for this device so that I can choose a specific driver gt Next gt Have Disk Insert Video Card Driver diskette gt OK gt Next gt Next gt Finish 2 Incase you have Adap
29. hich automatically recalls your personalized picture settings The direct button on the remote control is the button 44 Adjusting the Monitor 1 Dynamic 2 Standard 3 Movie 4 Custom Custom Lf EAs You can use the on screen menus to change the contrast and brightness according to personal prefer ence 1 Contrast Adjusts the contrast 2 Brightness Adjusts the brightness 3 Sharpness Adjusts the picture sharpness 4 Colour Adjusts the picture colour 45 Adjusting the Monitor Colour Tone lf E25 The tone of the colour can be changed The individual colour components are also user adjustable 1 Cool2 2 Cooll 3 Normal 4 Warmi 5 Warm2 Size LE EAS You can switch the Size The direct button on the remote control is button 46 Adjusting the Monitor e TV AV S Video mode Auto Wide Wide 16 9 Zoom1 Zoom 4 3 e Component HDMI mode Wide 16 9 Zoom1 Zoom 4 3 Sound Available Modes J Pc DVI Ty EJ av H S Video 5 Component HDMI Note The default setting may different depending on the selected Input Mode input signal source selected in External Input List and the selected resolution Mode te 2t j E er i pi j ko pe J F r Tiia i Val 8 Agi mi 4 ZA w GA KAT e ae Mi JP a The Monitor has a built in high fidelity stereo amplifier 1 Standard Choose Standard for the
30. ial Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Win dows NT are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are reg 76 Appendix istered trademarks of the U S Environmental Protection Agency EPA AIl other product names mentioned herein may be the trademarks or registered trademarks of their respective owners TI
31. lay Information together with Logo or Moving image cycle Ex Cycle Display Information for 1 hour followed by a Display Logo or moving image for 1 minute Change the Color Information periodically Use 2 different colors Ex Rotate the Color Information with 2 colors every 30 minutes Type 1 TIME FLGHT TIME OZ348 20 30 lt lt gt BSL 20 30 UA102 21 10 UA102 21 10 Avoid using a combination of characters and background color with large difference in luminance Avoid using Grey colors which can cause Image retention easily e Avoid Colors with big difference in luminance Black amp White Grey Ex 69 Information SYSTEM 245 e Recommended settings Bright colors with little difference in luminance e Change the characters color and background color every 30 minutes Ex SYSTEM 245 SYSTEM 245 STATUS OK STATUS OK e Every 30 minutes change the characters with movement Ex FPAPAWUWAL an FATTI UA0110 13 30 NAMAN AA0002 14 00 FA7777 14 15 ba The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it Image retention may not occur when a LCD panel is operated under normal conditions Normal conditions are defined as continuously changing video patterns When the LCD panel 1s operated for a long time with a fixed pattern over 12 hours there may be slight difference in vo
32. ltage between electrodes that work the liquid crystal LC in a pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased 70 Information Common Electrode ITO Black Matrix Color F ilter Data Gate TFT Pixel Electrode Storage Capacitor Bus Line Pisa ni Our LCD Monitor satisfies ISO13406 2 Pixel fault Class II 71 Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center U S A CANADA MEXICO ARGENTINE BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PUERTO RICO REP DOMINICA TRINIDAD amp TO BAGO VENEZUELA AUSTRIA BELGIUM CZECH REPUBLIC North America 1 800 SAMSUNG 726 7864 1 800 SAMSUNG 726 7864 01 800 SAMSUNG 726 7864 Latin America 0800 333 3733 0800 124 421 4004 0000 800 SAMSUNG 726 7864 01 8000112112 0 800 507 7267 1 800 10 7267 800 6225 1 800 299 0013 800 7919267 1 800 234 7267 00 1800 5077267 800 7267 1 800 682 3180 1 800 751 2676 1 800 SAMSUNG 726 7864 0 800 100 5303 Europe 0800 SAMSUNG 726 7864 0032 0 2 201 24 18 844 000 844 Distributor pro Ceskou republiku Samsung Zit Ceska organizacni slo k
33. ment system Monitor Color Cal amp Profiling Preference Copyright 2003 Samsung Electrenics Ca Ltd One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor The Natural Color S W is the very solution for this problem It is a color administration system de veloped by Samsung Electronics in association with Korea Electronics amp Telecommunications Research Institute ETRI This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images For more information refer to Help F1 in the software program How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD ROM Drive Then the initial screen of the program Natural Color will be executed Click Natural Color on the initial screen to install the Natural Color software To install the program manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Start button of Windows and then select Run Enter D color NCProSetup exe and then press the Enter key If the drive where the CD is inserted is not D enter the applicable drive 31 Using the Software How to delete the Natural Color software program Select Setting Control Panel on the Start menu and then d
34. more in formation see the PowerSaver section 7 Speaker You can hear sound by connecting the soundcard of your PC to the monitor Rear Note See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The configuration at the back of the monitor may vary from product to product POWER row POWER Connect the power cord for your monitor to the POWER on the back of the monitor This product may be used with 100 240VAC 10 DVI PC IN HDMI PC DVI D AUDIO IN 12 DVI DVI D _ a H COMPONENT IN ANTIN HDMI IN T wi Kensington Lock Introduction l PC Connect the signal cable to the PC port on the back of your monitor 2 DVI D Connect the DVI cable to the DVI D port on the back of your monitor 3 HDMI PC DVI D AUDIO IN Connect the HDMI PC DVI D AUDIO IN terminal at the back of your monitor to your computer s sound card O R AUDIO L Connect the port of the DVD VCR DVD DTV Set Top Box to the R AUDIO L port of the product B Pr Pg Y Connect the VIDEO OUT port of the DVD DTV Set Top Box to the Pp Pp Y input ports using a component video cable PR Pg Y Connect the CATV cable or TV antenna cable to the ANT IN port on the rear side of the m
35. nals or an incorrect antenna configuration some of the channels may not be tuned correctly Setup Available Modes Glpc DvI TV Blav H S video 5 Component gt J HDMI Note The default setting may different depending on the selected Input Mode input signal source selected in External Input List and the selected resolution 54 Adjusting the Monitor Language LAF Fi You can choose one of 2 languages English PE Note The language chosen affects only the language of the OSD It has no effect on any software running on the computer Sleep Time LAL Fi Turns the monitor off after a pre determined period of time 1 Off 2 30 55 Adjusting the Monitor 3 60 4 90 5 120 6 150 7 180 The direct button on the remote control is the button Transparency Changes the opaqueness of the background of the OSD l pA High Medium Low Opaque 56 Adjusting the Monitor Blue Screen wif Fi If no signal is being received or the signal is very weak a blue screen automatically replaces the noisy picture background If you wish to continue viewing the poor picture you must set the Blue screen mode to Off 1 Off 2 On Reset L Picture parameters are replaced with the factory default values 1 Image Reset 2 Colour Reset oF Adjusting the Monitor HDMI Black Level When a DVD or set top box is connected to your TV
36. ng your installation of this software may impair or destabilize the comect operation of your system either immediately of in the future Microsoll strongly recommends that pou stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing Conlinue Arpa 23 Using the Software Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Installing the Monitor Driver Manual Note When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown here Internet web site http www samsung com Worldwide Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click GX Start and Control Panel Then double click on Appearance and Personalization 3 ka gs AA E a in ta a eee ee ee ee 4 Click Advanced Settings 24 5 6 I Using the Software Dang ee Kara bo makeh piu aai Click Properties in the Monitor tab If the Properties button is deactivated it means the configura
37. ns are listed Q amp A Q A The remote control buttons do not respond Check the battery polarities Check if the batteries have been exhausted Check if the power is on Check if the power cord is securely connected Check if a special fluorescent or neon lamp is on in the vicinity How can I change the frequency The frequency can be changed by reconfiguring the video card Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can I adjusts the resolution Windows XP Set the resolution in the Control Panel gt Appearance and Themes gt Display gt Settings Windows ME 2000 63 Troubleshooting Set the resolution in the Control Panel Display Settings Contact the video card manufacturer for details How can I set the Power Saving function Windows XP Set the resolution in the Control Panel Appearance and Themes Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Man ual Windows ME 2000 Set the resolution at the Control Panel gt Display gt Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Man ual How can I clean the outer case LCD Panel Disconnect the power cord and then clean the monitor with a soft cloth using either a cleaning solution or plain water Do not leave an
38. o change channels when PIP is selected and the PIP SOURCE ss set to TV One Two Digit channel selection Use to select a channel numbered ten or over Press this button and the symbol is displayed Enter the two digit channel number Adjusts the audio volume Opens the on screen menu and exits from the menu or closes the adjustment menu Press to mute the sound temporarily Displayed on the bottom left of the screen Press the MUTE button again to cancel the Mute function Alternatively press the i buttons to cancel the Mute function 15 Yaa DOOUU OO UU 11 OQ 2v 0p A 13 5 14 N00 TV AV S Video Compo nent HDMI P MODE PC DVI Mode M B Magic Bright 15 JOO 16 O O O O Operates only for the CVBS S Video and RF Signal SOURCES 17 OQ Introduction Moves from one menu item to another horizontally vertically or adjusts selected menu values Activates a highlighted menu item Current picture information is displayed on the upper left corner of the screen Press the button to change the input signal SOURCE Changing the SOURCE is only allowed for external devices that are con nected to the monitor at the time This button is used to return to the immediately previous channel In TV mode selects TV channels Exits from the menu screen Press to select a pre defined Picture Mode of the monitor or to change the picture atmosphere as required When you press this but
39. on itor Make sure to use a TV antenna cable sold separately as the antenna cable Connect the HDMI IN terminal at the back of your monitor to the HDMI terminal of your digital output device using a HDMI cable 13 Introduction 2 The Kensington lock is a device used to phys ically fix the system when using it in a public place The locking device has to be purchased sepa rately For using a locking device contact where you purchase it S VIDEO VIDEO R AU pio 1 42 1 S VIDEO VIDEO Input devices such as DVD VCR or Camcorder are connected to the VIDEO or S VIDEO terminal of the monitor using the Video or S Video cable 2 R AUDIO L Connect the port of the DVD VCR DVD DTV Set Top Box to the R AUDIO L port of the monitor G Connect your headphones to the Headphone connection terminal Note See Connecting the monitor for further information regarding cable connections Remote Control The performance of the remote control may be affected by a TV or other electronic device operated near the monitor causing malfunction due to interference with frequency 14 SAMSUNG 1 0 ng 2 HOO0 3 sllllnn 6 8k 00 Introduction Onn 0000 O O Woo pp Tado 0000 0000 O p00 o On eJooo 0c E YIDA Ao 0000 G 0000 0000 G 00 G 000 00000 C0 000 2 00 Turns the monitor On Off Selects TV channels in the TV mode Used t
40. ouble click Add Delete a program Select Natural Color from the list and then click the Add Delete button 32 Adjusting the Monitor Input Available Modes e LJ Pc DvI Wry gt EJ av EF s video 4 Component gt CJHDMI P Note The default setting may different depending on the selected Input Mode input signal source selected in External Input List and the selected resolution Source List Ci Eas Use to select PC TV or other external input source connected to the Monitor Use to select the screen of your choice The direct button on the remote control is button 1 PC 2 DVI 3 TV 4 AV 33 Adjusting the Monitor 5 S Video 6 Component 7 HDMI PIP When external AV devices such as VCRs or DVDs are connected to the monitor PIP allows you to watch video from those devices in a small window super imposed on the PC Video signal Off On 1 PIP Turn the PIP Screen on or off The direct button on the remote control is button e Off On 2 Source Select the input SOURCE for the PIP The direct button on the remote control is button e PC DVI TV AV S Video 34 Adjusting the Monitor 3 Size Change the Size of the PIP window o m EE If you select EE Size Position will not be activated 4 Position Change the Position of the PIP window e Ce EF 35 Adjusting the Monitor t ia NG j j BAN Nagin CA CA Gf e
41. ow click Settings Tab and then click All Display Modes Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency Note If there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file l 2 Press Enter at the first and the second screen after executing the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard 30 Using the Software 5 Set a Keyboard for your computer 6 The next screen is for setting your monitor 7 First of all set a horizontal frequency for your monitor You can enter the frequency directly 8 Seta vertical frequency for your monitor You can enter the frequency directly 9 Enter the model name of your monitor This information will not affect the actual execution of X Window 10 You have finished setting up your monitor Execute X Window after setting other requested hardware Natural Color Natural Color Software Program Natural Color Pro color manage
42. pa pou naal nose bor Dirves bato GASO Plug and Play Moree Dina Yam 1 20017 Digtal Sigrar IM ect Vacca HP Pub shaor 1 bey if pour heden come milh an mabalihon CO EEA or Napag diak inani it niw Fo whas eiai allel Has hive doa iwat cho pou yaar kas aad ID do ib mia the ilia makamatay Recommended j F IP ije devoe Fede alter upang tee dive roll ail Belifech Giver Le ete re ny ae i a mta hom a ist of pecie locaton iedvanced Dirata i Teo urera theo hie Adhere ed Dii Meat Ip Continue CE JC Cum To alaha jm kian duy thee dayi a Select Don t search I will then click Next and then click Have disk Hardware Update Wizard Mar dvearo Update Wizard Fisa choste pug poarch and inclallaioon options a rn Selent the dovide dive pou wam ba inalall hoa this hardware D Gesch iy tha bes diea in these beskri in Tokeni the mamula are modal of pour hadaa deve and then chek Nasi ou H 3 hare a dak that panang tha disas agu want bo inated cho Hawa Dik Uss iha thak barat bakya ko lend cn pard the deial seach which riiet kaa pahi and acnonrabie mada The bett drea hand wil be inated ino gampahbls hedra Mita PN Phap and Pay Morton Choose thes option ko select the devane drea homai Widow does mot guarentee hat ha das po chases mall ba ha beret matoh for pour heres E Thin dre tt iay aral Talma win din amina i she WC tists C Cno Click the Browse button then choose A D Driver and
43. pliant video card installed in your computer Use the software utility installed on your computer to set up this feature State Normal Operation Power saving mode Power off Power button EPA ENERGY 2000 Power Indicator Blue Blue blinking black Power Consump Less than 45 watts Less than 2 watts Less than 2 watts tion Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjusts the screen as follows Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V kHz IBM 640 x 350 31 469 70 086 25 175 66 Specifications Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V kHz IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 0
44. r area and store all the channels found manually 1 Programme Inputting the appropriate program number on the screen 2 Colour System Adjusts repeatedly until the colour 1s of the best quality Auto lt gt PAL lt gt SECAM lt gt NTSC4 43 lt gt NTSC3 58 3 Sound System Adjusts repeatedly until the sound is of the best quality BG lt gt DK lt gt I lt gt M 4 Channel Choosing the air channel through the adjustment of up down under the current frequency 5 Search The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen 6 Store It s used to restore the number user inputs Add Delete 1 Channel List You can add or delete a channel so only channels you want are displayed NG a i 1s active when Child Lock is selected to On 51 Adjusting the Monitor 2 Child Lock Protects children from viewing inappropriate programs by blocking certain broadcast or video programs The Child Lock feature can be selected only from the remote 52 Adjusting the Monitor Sort It s used to exchange the numbers of two channels Name If channel name information is broadcast when you store the channels either manually or automatically the names are assigned to the channels directly You can however change these names or assign new names as required 3 Adjusting the Monitor Fine Tune Due to weak sig
45. rally used for TV antennas Balances the levels of the sound coming from each speaker in televisions with two speakers Balances the levels of the sound coming from each speaker in televisions with two speakers Whereas the terrestrial broadcasting is delivered via frequency signals through the air cable broadcasting is transmitted via a ca ble network In order to view cable TV one must purchase a cable receiver and hook it up to the cable network CATV refers to the broadcasting service offered at hotels schools and other buildings through their own broadcasting sys tem apart from VHF or UHF broadcasting by terrestrial broad casters The CATV programs may include movies ment and educational programs Different from cable TV CATV can be viewed only within the area in which the CATV service 1s offered Short for Super Video S Video allows up to 800 lines of hori zontal resolution enabling high quality video VHE indicates TV channels 2 to 13 and UHF indicates channels 14 through 69 This feature allows the viewer to fine tune the TV channel to ob tain the best viewing conditions The Samsung LCD TV has both automatic and manual channel fine tuning features to enable the viewer to adjust their desired settings External device input refers to video input from such external vid eo devices as VCRs camcorders and DVD players separate from a TV broadcast A type of digital disk technology that takes up only the
46. s may be come caught e Also if you tilt the product too far it may fall and cause personal injury L Do not install the product in a location low enough for children to reach e Otherwise it may fall and result in personal injury e Since the front part of the product is heavy install the product on a level and stable surface L Do not put any heavy objects on the product e This may result in personal injury and or damage to the product t When using the product use it in the correct position e Keep your back straight while looking at the product e The distance between your eyes and the screen should be between 45 to 50 cm Look at the screen from a slightly higher location than the height of the screen e When using the product use it in the correct position e Adjust the angle so that light is not reflected on the screen e Place your arms perpendicular to your sides and allow your arms to be level with the back of the hand e Keep your elbow at 90 degrees e Keep your knees at greater than 90 degrees and keep your heels firmly on the floor Keep your arms lower than your heart Introduction Package Contents Wu Note Please make sure the following items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items Unpacking Without stand With stand Manuals 7 Quick Setup Guide Warranty Card User s Guide Monitor Driver
47. se button then click OK button continually Hardware Update Wizard Completing the Hardware Update Wirand The vazad kar Arah erthalieg the saba for l Samgung tiii Divas Dake a Pran mi Diya Ye xr TOO Digdal G iginest Bot degiak ore Dre Daai Ta amay deimh abad ho dre hilo Zz z ii tho doo bada aitor up the haa poll Ji Back Bod Back Driver back bo ihe paviou bribe diwa ik Frith lo dirba the acaad L Lreires tal To umimnal tha deve bidean Choo Pong and Play Monitor and A Prophet IN i roporiies Monitor driver installation is completed Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps l pA 3 Choose OK button on the Insert disk window Click the Browse button on the File Needed window Choose A D Driver then click the Open button and then click OK button How to install Click Start Setting Control Panel Double click the Display icon Select the Settings tab and click Advanced Properties button Choose Monitor Casel If the Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button is active click the Properties button then follow next steps continually Click Driver and then click on Update Driver then click on the Next button Choose Display a list of
48. t Control Panel then click the Appearance and Themes icon park al vbr E gt py Chou PA Intermot Cepioer wo a ae E mail E5 Ph Recent prre i match Epress Ei Piy Fire a ror i0 gt Pee Pusi af Potopa is Piy aa re r W Paint E Conn Pana ee Se DD wrens Media Mayer oo b MSH THp SEA Hac snd Support a TE Se pa a dentin ra Co NG a Woa PN 23 mun a Tate ee Aij rage er 3 Click Display icon and choose the Settings tab then click Advanced lagay Poe peer Lion Ee LE ee Fete be ii Guo DB Lae Bren T ee ee issa et Be eo dee a wr see ee 2 naga ee ee aE Dagdag if pick a Control Panel ito Pang ad Play Foret cers IC Pelt F r Sen dete a y Enka cali Lase Mas graa 37 ba Se ER ae TOD by FGG pinole 4 za Pha arni Play Mondor Davisa ippa Mordess Marulachuer Bharelord montor types Location an 30 Prophet iii gt Device taun aa Thin ehana ia marbre peerk ren ee i ie md OH Ii you aro hating peablens wih iha device cick Troubleshoot to recent conect This lad depis Ganr j may ko an i k Dawca ube Lea tree davon ereabial Coe cast 21 Using the Software Click Update Driver and select Install from a list or then click Next button Plug and Play Montlor Pio peer ties sma Dersa Diwar i Welcome lo Iho Hardware Update aa Phag aral Play Hioni vi ig Wizard Thin waz f Divas Pra hi nagana Then azad he
49. ter video driver and the monitor driver 4 Check if the scanning ratio of the video screen is set at 56 Hz 75 Hz Do not exceed 60 Hz when using the maximum resolution 5 If you have problems in installing the adapter video driver boot the computer in Safe Mode remove the Display Adapter at the Control Panel System Device Administrator and then reboot the computer to reinstall the adapter video driver Check List E note Before calling for assistance check the information in this section to see if you can remedy any prob lems yourself If you do need assistance please call the phone number on the Information section or contact your dealer Installation Screen Audio Remote Control 1 Problems related to Installation Note Problems related to the monitor installation and their solutions are listed PC Mode Q It appears the PC does not function normally A Check if the Display Adapter Driver VGA Driver is properly installed Refer to Installing Driver Q The monitor screen flickers Check if the signal cable between the computer and the monitor is securely connected and tight ened Refer to Connecting the monitor TV Mode Q TV screen is blurred or shows noise signals Check if the TV antenna connector is securely connected to the external antenna Refer to Connecting TV TV signal is not received Select Auto Store to configure the channel system automatically Refer to the A
50. ter Driver Setup file on your computer Run Setup exe or Install exe which is found in the Adapter Driver Setup file 4 Maintenance and Cleaning 1 Maintaining the Monitor Case Clean with a soft cloth after disconnecting the power cord e Do not use benzene thinner or other flammable substan ces or a wet cloth e We recommend a Samsung cleansing agent is used to pre vent damage to the screen 2 Maintaining the Flat Panel Display Screen Clean with a soft cloth cotton flannel smoothly e Never use acetone benzene or thinner ts pa They may cause flaws or deformation of the screen sur ka a face e The user will be required to pay costs and related expenses for repair of damages caused by him her 5 Symptoms and Recommended Actions Note A monitor recreates visual signals received from the computer Therefore if there is trouble with the computer or the video card this can cause the monitor to become blank have poor coloring noise Video mode not supported etc In this case first check the SOURCE of the problem and then contact a service center or your dealer 60 Troubleshooting 1 Check if the power cord and the video cables are properly connected to the computer 2 Check if the computer beeps more than 3 times when booting If it does request an after service for the main board of the computer 3 If you installed a new video card or if you assembled the PC check if you installed the adap
51. this is the case adjust the Brightness and Contrast by using the OSD menu You can use the on screen menus to change the contrast and brightness according to personal prefer ence 1 2 Contrast Adjust the Contrast Brightness Adjust the Brightness Note If you adjust the picture by using Custom function MagicBright will turn to the Custom mode 38 Adjusting the Monitor Colour Tone Li The tone of the colour can be changed The individual colour DTVs are also user adjustable 1 PC Cool Normal Warm Custom 2 DVI Cool Normal Warm Colour Control L3 Adjusts the individual R G B Colour Controls 1 Red 2 Green 3 Blue 39 Adjusting the Monitor Available in PC Mode Only Note If you adjust picture by using Colour Control function Colour Tone will turn to the Custom mode Image Lock Image Lock 1s used to fine tune and get the best image by removing noise that creates unstable images with jitter and shimmer If satisfactory results are not obtained using the Fine adjustment use the Coarse adjustment and then use Fine again Available in PC Mode Only 1 Coarse Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the Horizontal Control menu 2 Fine Removes noise such as horizontal stripes If the noise persists even after Fine tuning repeat it after adjusting the frequency
52. tion for your monitor is completed The monitor can be used as is If the message Windows needs is displayed as shown in the figure below click Continue Mar tee Tyee a al Mania Leone Morton Settee Soren naina rate 60 Her a Hae a Pal Pri enter cance chara masatge cannot dagliy comectiy The muy lead Ko an urash Japar andor Gama hardware Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage Click Update Driver in the Driver tab Ganang PnP Mondce Properties Ss S Si ne Pa en sE aes A Tere Pri Motor a Ganen Pri Lordz Kamag rata CUA Cesar orm KO KONO ee Diga yr ete erari Har sehen Seared pie fatal Let ater aa PADA ett BED LE Bala Tawa Pha device waking proved Ta veer Cam cad Sha ia Bea To aala a Greer pote Oar ha diga i Fe device ieh oe a aa roll heck bo ak piy Palaka deer Diass Ta paka danica To urira Fa deve ET a Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer 25 Using the Software Hirer do ju ware fo Hoa Th toe cere pofwaeret I s Tart m den paaa Bye Paar Search dytomatically tee plated driver pathar Ee isapa andl peer Bye cere mia Be Pierer Poe Dlr LAr Gees re ai sara WF fretted nalink et eve pick dro a
53. to rainwater it may cause electric shock or fire between the antenna and any electric wires nearby so that they do not Nf come into with each other if the antenna is knocked over by strong wind or any other accident e RE LJ When using an outdoor antenna ensure that there is sufficient distance e A knocked over antenna may cause injury or electric shock J Keep the plastic packaging bag out of children s reach The plastic packaging bag may cause suffocation if children play ay with it 3 If the height of your monitor is adjustable do not place any object or part of your body on the stand when lowering it Clean Others Safety Instructions When cleaning the monitor case or the surface of the TFT LCD screen wipe with a slightly moistened and soft fabric L Do not spray cleaner directly onto the surface of the product e Otherwise this may result in the discoloration and distortion of the structure and the screen surface may peel off L Clean the product using a soft cloth with a monitor cleaner only If you must use a cleaner other than the monitor cleaner dilute it with water at a ratio of 1 10 LI When cleaning the power plug pins or dusting the power outlet clean it with a dry cloth e Otherwise it may result in fire LJ When cleaning the product make sure to disconnect the power cord e Otherwise it may result in electric shock or fire L When cleaning the product disconnect th
54. ton current mode is displayed on the lower center of the screen The monitor has four automatic picture settings that are preset at the factory Then press the button again to circle through available preconfig ured modes Dynamic gt Standard gt Movie gt Custom MagicBright is a new feature providing the optimum viewing en vironment depending on the contents of the image you are watch ing Then press the button again to circle through available preconfig ured modes Entertain gt Internet gt Text gt Dynamic Contrast gt Custom When you press this button current mode is displayed on the lower center of the screen The monitor has a built in high fidelity stereo amplifier Then press the button again to circle through available preconfig ured modes Standard gt Music gt Movie gt Speech gt Custom Press the button once to freeze the screen Press it again to un freeze Press to change the screen size PC DVI mode Wide 4 3 TV Ext AV S Video mode Auto Wide Wide 16 9 Zoomi Zoom 4 3 16 18 O O O Adjustable when the PIP function is ON 19 QVOUU0 20 OU 21 O O O Available in PC DVI Mode 22 OD O Available In PC mode Only Introduction Component HDMI Wide 16 9 Zoom1 Zoom2 4 3 Selects the Video SOURCE STEREO MONO DUAL 1 DUAL Il and MONO NICAM MONO NICAM STEREO can be operated depending on broad casting type by
55. tor 3 Select TV using the SOURCE 4 Select a desired TV channel Note Is weak signal causing poor reception Purchase and install a signal amplifier for better reception Connecting DVD DTV Set Top Box P note Connect to the DVD DTV Set Top Box input 1f the device has a COMPONENT IN connector You can watch Component simply by hooking up the Component with the monitor as long as the power is on 20 Connections y aaa AUDIO OUT viGEO OUT COMPONENT WED OUT AC O si a am 1 i n ig 1 Connect the port of the DVD VCR DVD DTV Set Top Box to the R AUDIO L port of the monitor 2 Connect the VIDEO OUT port of the DVD DTV Set Top Box to the Pp Pp Y input ports using a component video cable Pp Pp Y 3 Select Component using the SOURCE Connecting HDMI P Note You cannot connect a PC to the HDMI IN terminal 1 Input devices such as digital DVD are connected to the HDMI IN terminal of the monitor using the HDMI cable 2 Then start the DVD with a DVD disc inserted 3 Select HDMI using the SOURCE button 21 Connections Connecting Using a DVI to HDMI Cable 1 O Connect the DVI output terminal of a digital output device to the HDMI IN terminal of the monitor using a DVI to HDMI cable Connect the red and white jacks of an RCA to stereo for PC cable to the same colored audio output terminals of the digital output device and conn
56. ure that the front end of the bottom of the product does not project out e Otherwise it may fall or cause personal injury e Use a cabinet or rack of a size appropriate to the product Safety Instructions L DO NOT PLACE CANDLES MOSQUITO REPELLANT CIGA RETTES AND ANY HEATING APPLIANCES NEAR TNE PROD UCT e Otherwise this may cause fire Keep heating appliances as far away from the power cord or the prod uct as possible e Otherwise this may result in electric shock or fire 3 Do not install it in a badly ventilated location such as a bookcase or closet e Otherwise this may result in fire due to an increase in the internal temperature CJ Put down the monitor carefully e Failing to do so may damage the monitor L Do not place the front of the product on the floor e Otherwise this may result in damage to the screen display J Ensure that an authorized installation company installs the wall mount e Otherwise it may fall and cause personal injury e Make sure to install the specified wall mount J Install your product in a well ventilated location Ensure that there is a clearance of more than 10 cm from the wall e Otherwise it may result in fire due to an increase in the internal tem perature L To prevent rainwater from running along the outdoor antenna cable and into the house ensure that the outdoor portion of the cable is hanging below the point of entry e If the product is exposed
57. using DUAL button on the remote control while watching TV Turns the monitor off after a pre determined period of time Push the L button to turn PIP screen On Off Adjusts the screen display automatically 17 Connections Connecting the monitor 1 Connecting to a Computer 1 Connect the power cord for your monitor to the power port on the back of the monitor Plug the power cord for the monitor into a nearby outlet O Use a connection appropriate for your computer Using the D sub Analog connector on the video card e Connect the signal cable to the PC port on the back of your monitor Using the DVI Digital connector on the video card e Connect the DVI Cable to the DVI D Port on the back of your Monitor J aes DVI D 9 Connect the HDMI PC DVI D AUDIO IN port on the rear side of the monitor to the sound card of the PC O Turn on both your computer and the monitor 18 Connections 2 Connecting to a Macintosh 1 Using the D sub Analog connector on the video card e Connect the signal cable to the D SUB port on the back of your monitor 2 Turn on the monitor and Macintosh Connecting to Other devices Note This monitor allows the user to connect it to such input devices as a DVD player a VCR or camcorder or a DTV or TV without disconnecting the PC The configuration at the back of the monitor may vary from product to product Connecting A
58. uto Store 2 Problems related to Screen Note Problems related to the monitor screen and their solutions are listed 61 ym QR F O Troubleshooting Screen is blank and power indicator is off Ensure that the power cord is firmly connected and the LCD monitor is on Refer to the Con necting the monitor Check Signal Cable message Ensure that the signal cable is firmly connected to the PC or video SOURCEs Refer to the Connecting the monitor Ensure that the PC or video SOURCES are turned on Not Optimum Mode message Check the maximum resolution and the frequency of the video adapter Compare these values with the data in the Preset Timing Modes Chart Picture rolls vertically Check if the signal cable is securely connected Connect it again securely Refer to Connecting the monitor Image is not clear Picture is blurred Run Frequency Coarse and Fine tuning Turn on again after removing all accessories video extension cable etc Set resolution and frequency to the recommended ranges Picture image is unstable and vibrates Ghost images are shown in the picture Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor If not reset them referring to the current Information under the monitor menu and Preset Timing Modes The image is too light or too dark Adjust the Brightness and Contrast Refer to the Brightness Contrast Screen color 1s
59. via HDMI it may cause a degradation in the screen quality such as an increase in the black level a low contrast or discoloration etc depending on the external device connected In this case adjust the screen quality of your TV by configuring the HDMI black level 1 Normal 2 Low 58 Troubleshooting Self Test Feature Check Note Check the following items yourself before calling for service Contact the service center for problems that you cannot solve by yourself Self Test Feature Check Not Optimum Mode Display Adapter Driver Maintenance and Cleaning Symptoms and Recommended Actions 1 Self Test Feature Check 1 Turn off both your computer and the monitor 2 Unplug the video cable from the back of the computer 3 Turn on the monitor The figure shown below Check Signal Cable appears on a black background when the mon itor is in its normal working condition though it does not sense any video signal While in the Self Test mode the LED power indicator remains green and the figure moves around on the screen ee Check signal cable PC 4 Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous procedure check your video controller and computer system your monitor is functioning properly 2 Not Optimum Mode If the vertical resolution is not optimum mode you can still see the display but t
60. y detergent or scratches on the case Do not let any water enter the monitor 64 Specifications General General Model Name SyncMaster 2232MW LCD Panel Size 22 inch 56 cm Display area 473 76 mm H x 296 1 mm V Pixel Pitch 0 282 H x 0 282 V Synchronization Horizontal 30 81 kHz Vertical 56 75 Hz Display Color 16 7M Resolution Optimum resolution 1680x1050 60Hz Maximum resolution 1680x1050 60Hz Input Signal Terminated RGB Analog DVI Digital Visual Interface Compliant Digital RGB 0 7 Vp p 5 Yo Separate H V sync Composite SOG TTL level V high 2 0 V V low S 0 8 V Maximum Pixel Clock 146 250MHz Analog Digital Power Supply AC 100 240 V 4 10 Yo 50 60 Hz 3 Hz Signal Cable 15pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions W x H x D Weight Simple Stand 531 5 x 390 9 x 69 mm 20 93 x 15 39 x 2 72 inch Without Stand 531 5 x 438 9 x 209 mm 20 93 x 17 28 x 8 23 inch With Stand 5 6kg 12 35 Ibs Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C 65 Specifications Environmental considerations Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system The interaction of the monitor and the computer systems will provide

Samsung 2232MW User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents