Samsung Built in with anydish zone (CTN464NC01) User Manual
Contents
1. Induction HOO user manual 100 Recycled Paper ial is made with 100 recycled pay imagine the possibilities ENGLISH Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Sie CTN464NC01_XSA_DG68 00348A 01 EN indd 1 D 13 10 2555 18 06 35 a SSE ee using this manual Please take the time to read this owner s manual paying particular attention o the safety information contained in the following section before using your appliance Keep this manual for future reference If transferring ownership of the appliance please remember to pass the manual on to he new owner IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS The following symbols are used in the text of this Owner s Manual A Hazards or unsafe practices that may result in severe personal WARNING injury or death A Hazards or unsafe practices that may result in minor personal CAUTION injury or property damage gt To reduce the risk of fire explosion electric shock or personal injury CAUTION when using your hob follow these basic safety precaution Do NOT attempt Do NOT disassemble Do NOT touch Follow directions explicitly Unplug the power plug from the wall socket Make sure the machine is grounded to prevent electric shock Call the service center for help Note C2. overheated NEVER heat a babys bottle with the teat on as the bottle may explode if overheated Do not immerse the power cable or plug in water and keep the power cable away from heated surfaces Do not operate this appliance if it has a damaged power cable or plug WARNING Liquids and other foods must not be heated in sealed containers since they are liable to explode Do not attempt to repair disassemble or modify the appliance yourself Do not use any fuse such as cooper steel wire etc other than the standard fuse When repairing or reinstalling the appliance is required contact your nearest service centre Failure to do so may result in electric shock fire problems with the product or injury If any foreign substance such as water has entered the appliance unplug the power plug and contact your nearest service centre Failure to do so may result in electric shock or fire If the appliance is flooded please contact your nearest service centre Failure to do so may result in electric shock or fire If the appliance generates a strange noise a burning smell or smoke unplug the power plug immediately and contact your nearest service centre Failing to do so may result in electric shock or fire CAUTION SIGNS FOR USING Take care as beverages or food may be very hot after heating Especially when feeding a child check that it has cooled sufficiently Take care when heat
3. 30cm from induction cooking zones when turned on If in doubt you should consult the manufacturer of your device or your doctor wave SAFETY WHEN CLEANING Always turn the appliance off before cleaning For safety reasons do not clean the appliance with a steam jet or high pressure cleaner Clean the hob in accordance with the cleaning and care instructions contained in this manual 4_ safety instructions CTN464NC01_XSA_DG68 00348A 01 EN indd 4 D 13 10 2555 18 06 35 a SSE ee way SEVERE WARNING SIGNS FOR INSTALLATION The installation of this appliance must be performed by a qualified hob service technician trained by the manufacturer Please see the section Installing your Hob Plug the power cord into the proper wall socket or higher and use the socket for this appliance only Plug the power plug into the wall socket firmly In addition do not use an extension cord Appliance should allow to disconnection of the appliance from the supply after installation The disconnection may be achieved by having the plug accessible or by incorporating a switch in the fixed wiring in accordance with the wiring rules Failure to do so and sharing a wall socket with other appliances using a power strip or 2 extending the power cord may result in electric shock or fire m Do not use an electric transformer It may result in electric shock or fire z The installation of this appliance must be performed by a qualified t
4. AND FEATURES BEFORE YOU BEGIN HOB USE CLEANING AND CARE WARRANTY AND SERVICE TECHNICAL DATA CTN464NC01_XSA_DG68 00348A 01 EN indd 11 D 12 12 13 14 16 16 17 18 19 19 20 20 20 21 21 22 22 23 23 23 24 24 25 26 26 27 28 28 29 30 30 31 32 33 33 Re gulations and compliance Safety instructions for the installer Connecting to the mains power supply Installing into the countertop Cooking zones Control panel Components Induction heating The key features of your appliance Safety shutoff Re sidual heat indicator Temperature detection Initial cleaning SLNALNOO Cookware for induction cooking zones Sui tability test Size of pans Operating noises Us Us ing suitable cookware Switching the appliance on Se Switching the appliance off Switching a cooking zone off Us ing the child safety lock Timer Power boost control Bri dge Control Water boiling Power Management Suggested settings for cooking specific foods Hob Hob frame option ing the touch control sensors lect cooking zone and heat setting To avoid damaging your appliance FAQs and troubleshooting Se rvice Technical data Cooking zones Contents _11 13 10 2555 18 06 35 a SSE ee installing the hob Z Be sure the new appliance is installed and grounded only by qualified personnel warne Please observe this instruction The warrant
5. children should be supervised to ensure that they do not play with the appliance The cooking zones will become hot when you cook Always keep small children away from the appliance safety instructions _3 CTN464NC01_XSA_DG68 00348A 01 EN indd 3 D 13 10 2555 18 06 35 L SSE ee A SAFETY DURING USE This appliance is to be used only for normal cooking and frying in the home It is not designed for commercial or industrial use Never use the hob for heating the room Take care when plugging electrical appliances into mains sockets near the hob Mains leads must not come into contact with the hob Overheated fat and oil can catch fire quickly Never leave surface units unattended when preparing foods in fat or oil for example when cooking chips Turn the cooking zones off after use Always keep the control panels clean and dry Never place combustible items on the hob It may cause fire Do not use the hob to heat aluminium foil products wrapped in aluminium foil or frozen foods packaged in aluminium cookware There is the risk of burns from the appliance if used carelessly Cables from electrical appliances must not touch the hot surface of the hob or hot cookware Do not use the hob to dry clothes Never store flammable materials such as aerosols and detergents in draws or cupboards under the hob WARNING Users with Pacemakers and Active Heart Implants must keep their upper body at a minimum distance of
6. scraper 30_ cleaning and care CTN464NC01_XSA_DG68 00348A 01 EN indd 30 D 13 10 2555 18 06 39 a SSE ee warranty and service FAQS AND TROUBLESHOOTING A fault may result from a minor error that you can correct yourself with the help of the following instructions Do not attempt any further repairs if the following instructions do not help in each specific case Z Repairs to the appliance are to be performed only by a qualified service technician wanne Mporoperly effected repairs may result in considerable risk to the user If your appliance needs repair please contact your customer service centre What should do if the cooking zones are not functioning Check for the following possibilities e The fuse in the house wiring fuse box is intact If the fuses trip a number of times call an authorised electrician The appliance is properly switched on The control indicators in the control panel are illuminated The cooking zone is switched on The cooking zones are set at the desired heat settings What should do if the cooking zones will not switch on Check for the following possibilities e A period of more than 10 seconds has elapsed between when the On Off button was actuated and the desired cooking zone switches on see the section Switching the appliance on e The control panel is partially covered by a damp cloth or liquid What should do if the display except for the residual
7. the hazards of improper use 6_ safety instructions CTN464NC01_XSA_DG68 00348A 01 EN indd 6 D 13 10 2555 18 06 35 a SSE ee The appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety WARNING Accessible parts may become hot during use To avoid burns young children should be kept away WARNING If the surface is cracked switch off the appliance to avoid the possibility of electric shock Do not use your hob until the glass surface has been replaced Metallic objects such as knives forks spoons and lids should not be placed on the hob surface since they can get hot WARNING Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock N Do not touch the power plug with wet hands This may result in electric shock Do not turn the appliance off by unplugging the power plug while an operation is in progress Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire Keep all packaging materials well out of the reach of children as packaging materials can be dangerous to children Ifa child places a bag over its head it may result in suffocation Failing to do so may result in el
8. 06 35 a SSE ee e CAUTION SIGNS FOR CLEANING The hob should be cleaned regularly and any food deposits removed Failure to maintain the hob in a clean condition could lead to deterioration of the surface that could adversely affect the life of the appliance and possibly result in a hazardous situation Take care not to hurt yourself when cleaning the appliance external internal You may hurt yourself on the sharp edges of the appliance Do not clean the appliance with a steam cleaner This may result in corrosion disposal instructions DISPOSING OF THE PACKAGING MATERIAL All materials used to package the appliance are fully recyclable Sheet and hard foam parts are appropriately marked Please dispose of packaging materials and old appliances with due regard to safety and the environment A PROPER DISPOSAL OF YOUR OLD APPLIANCE WARNING Before disposing of your old appliance make it inoperable so that it cannot be a source of danger To do this have a qualified technician disconnect the appliance from the mains supply and remove the mains lead The appliance may not be disposed of in the household rubbish Information about collection dates and public refuse disposal sites is available from your local refuse department or council 10_ disposal instructions CTN464NC01_XSA_DG68 00348A 01 EN indd 10 D 13 10 2555 18 06 35 a SSE contents INSTALLING THE HOB PARTS
9. 3 10 2555 18 06 37 a SSE ee USING SUITABLE COOKWARE Better pans produce better results e You can recognise good pans by their bases The base should be as thick and flat as possible e When buying new pans pay particular attention to the diameter of the base Manufacturers often give only the diameter of the upper rim e Do not use pans which have damaged bases with rough edges or burrs Permanent scratching can occur if these pan are slid across the surface e When cold pan bases are normally bowed slightly inwards concave They should never be bowed outwards convex e f you wish to use a special type of pan for example a pressure cooker a simmering pan or a wok please observe the manufacturer s instructions Energy saving tips You can save valuable energy by observing the following points e Always position pots and pans before switching on the cooking zone Right e Dirty cooking zones and pan bases increase power consumption e When possible position the lids firmly on the pots and pans to cover completely Wrong e Switch the cooking zones off before the end of the cooking time to use the residual heat for keeping foods warm or for thawing USING THE TOUCH CONTROL SENSORS To operate the touch control sensors touch the desired panel with the tip of your pointed finger until the relevant displays illuminate or go out or until the desired function is activated Ensure that y
10. 8 00348A 01 EN indd 13 D 13 10 2555 18 06 36 ee INSTALLING INTO THE COUNTERTOP Make a note of the serial number on the appliance rating plate prior to installation This number will be required in the case of requests for service and is no longer accessible after installation as it is on the original rating plate on the underside of the appliance Pay special attention to the minimum space and clearance requirements Secure the brackets at both sides with the provided screws before mounting the hob onto the brackets C Min 50 mm Min 5 mm mm Y a t a p 4 gt C 560 mm J A N min 20 50 W A d N Induction Hob min 5 mm 20 mm t Insulation Panel ventilation gap Oven 14_ installing the hob CTN464NC01_XSA_DG68 00348A 01 EN indd 14 13 10 2555 18 06 36 a gt 2 u n gt i zZ Q ae m ma O uu q J CTN464NC01_XSA_DG68 00348A 01 EN indd 15 installing the hob _15 13 10 2555 18 06 36 ee parts and features COOKING ZONES e s ESES e2 s lninivitiiie Induction cooking zone 1400 W with Power Boost 2000 W Induction cooking zone 2200 W with Power Boost 3200 W Induction rear Bridge zone 1800 W with Power Boost 2600 W Induction front Brid
11. NEW ZEALAND 0800 SAMSUNG 0800 726 786 www samsung com CHINA 400 810 5858 HONG KONG 852 3698 4698 www samsung com hk Chinese www samsung com hk_en English 1800 1100 11 3030 8282 INDIA 1800 3000 8282 1800 266 8282 0800 112 8888 INDONESIA 021 5699 7777 JAPAN 0120 327 527 MALAYSIA 1800 88 9999 1 800 10 SAMSUNG 726 7864 for PLDT www samsung com 1 800 3 SAMSUNG 726 7864 for Digitel PHILIPPINES 1 800 8 SAMSUNG 726 7864 for Globe 02 5805777 SINGAPORE 1800 SAMSUNG 726 7864 1800 29 3232 TEEN 02 689 3232 0800 329 999 TAIWAN 0266 026 066 VIETNAM 1 800 588 889 CTN464NC01_XSA_DG68 00348A 01 EN indd 36 D Code No DG68 00348A 01 13 10 2555 18 06 39
12. No Glass Ceramic Porcelain No Cookware for induction hob is labelled as suitable by the manufacturer Certain cookware can make noise when being used on induction cooking zones These noise are not a fault in the appliance and do not affect operation in any way 20_ before you begin CTN464NC01_XSA_DG68 00348A 01 EN indd 20 D 13 10 2555 18 06 37 a SSE SUITABILITY TEST Cookware is suitable for induction cooking if a magnet sticks to the bottom of the cookware and cookware is labelled as suitable by the cookware manufacturer tt SIZE OF PANS Induction cooking zones adapt automatically to the size of the bottom of the cookware up to a cerain limit However the magnetic part of the bottom of the cookware must have a minimum diameter depending upon the size of the cooking zone 3SN JOH Diameter of cooking zones Minimum diameter of the bottom of the cookware 210 mm 140 mm 160 mm 100 mm Front or Rear Bridge 120 mm Complete Bridge 180mm oval fish kettle OPERATING NOISES If you can hear e Cracking noise cookware is made of different materials e Whistling you use more than two cooking zones and the cookware is made of different materials e Humming you use high power levels e Clicking electric switching occurs e Hissing Buzzing the fan operates The noise are normal and do not refer to any defects hob use _21 CTN464NC01_XSA_DG68 00348A 01 EN indd 21 D 1
13. OHUSHR OSC COMICS 4074 Important 2_ using this manual CTN464NC01_XSA_DG68 00348A 01 EN indd 2 D 13 10 2555 18 06 35 a SSE ee Safety Instructions The safety aspects of this appliance comply with all accepted technical and safety standards However as manufacturers we also believe it is our responsibility to familiarize you with the following safety instructions A ELECTRICAL SAFETY Be sure the appliance is properly installed and grounded by a qualified technician The appliance should be serviced only by qualified service personnel Repairs carried out by unqualified individuals may cause injury or serious malfunction If your appliance is in need of repair contact your local service centre Failure to follow these instructions may result in damage and void the warranty SNOILONYLSNI ALSAVS Flush mounted appliances may be operated only after they have been installed in cabinets and workplaces that conform to the relevant standards This ensures sufficient protection against contact for electrical units as required by the essential safety standards If your appliance malfunctions or if fractures cracks or splits appear switch off all cooking zones disconnect the hob from the mains supply and contact your local service centre A CHILD SAFETY This appliance is not intended for use by young children or infirm persons without the adequate supervision of a responsible adult Young
14. ales watermarks fat drippings and metallic discolouration with the use of a commercially available ceramic glass or stainless steel cleaner Light Soiling 1 Wipe the ceramic glass surface with a damp cloth 2 Rub dry with a clean cloth Remnants of cleaning agent must not be left on the surface 3 Thoroughly clean the entire ceramic glass cooking surface once a week with a commercially available ceramic glass or stainless steel cleaner 4 Wipe the ceramic glass surface using adequate amounts of clean water and rub dry with a clean lint free cloth Stubborn Soiling 1 To remove food that has boiled over and stubborn splashes use a glass scraper 2 Place the glass scraper at an angle to the ceramic glass surface 3 Remove soiling by scraping with the blade Glass scrapers and ceramic glass cleaners are available from specialty retailers AYVO ANY ONINVATO cleaning and care _29 CTN464NC01_XSA_DG68 00348A 01 EN indd 29 D 13 10 2555 18 06 39 a SSE ee Problem Dirt 1 Remove burnt on sugar melted plastic aluminium foil or other materials with a glass scraper immediately and while still hot A There is a risk of burning yourself when the glass scraper is used on a hot warna cooking zone 2 Clean the hob as normal when it has cooled down If the cooking zone on which something has melted has been allowed to cool warm it up again for cleaning l4 Scratches or dark bl
15. atically switches itself off an acoustic signal sounds as confirmation and the timer display indicates To make the settings more quickly touch any of the G or O control sensors until the desired value is reached If the O control sensor is touched first the time setting will begin at 99 minutes if the control sensor is touched first the time setting will begin at 1 minute hob use _25 CTN464NC01_XSA_DG68 00348A 01 EN indd 25 D 13 10 2555 18 06 38 ee Countdown timer For the countdown timer to be used the appliance must be switched on but all the cooking zones must be switched off 1 Touch the Timer control amp sensor B will appear in the timer display 2 Set the desired period of time using the Timer setting selectors or The countdown timer function is now activated and the remaining time appears in the timer display To adjust the remaining time touch the Timer control Y sensor and change the setting using the Timer setting selectors or POWER BOOST CONTROL The power boost function g makes additional power available to the each cooking zones example bring a large volume of water to the boil The power boost function is activated for maximum 10 minutes for each cooking zones After these times the cooking zones automatically return to power level B In certain circumstances the Power boost function may be deactivated automatically to protect the internal electron
16. e is a risk of burns WARNING A Ifthe power supply is interrupted the H symbol will go out and information about wanuna residual heat will no longer be available However it may still be possible to burn yourself This can be avoided by always taking care when near the hob parts and features _19 CTN464NC01_XSA_DG68 00348A 01 EN indd 19 D 13 10 2555 18 06 37 a SSE ee TEMPERATURE DETECTION If for any reason the temperatures on any of the cooking zones were to exceed the safety levels should this happen then the cooking zone will automatically reduce to a lower power level When you have finished using the hob the cooling fan will continue to run until the hob s electronics has cooled down And the cooling fan switched itself on and off depending upon the termperature of the electronics before you_beagin INITIAL CLEANING Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass cleaner A Do not use caustic or abrasive cleaners The surface could be damaged WARNING nob use COOKWARE FOR INDUCTION COOKING ZONES The induction hob can only be turned on when a cookware with a magnetic base is placed on one of the cooking zones You can use the following suitable cookware Cookware material Cookware material Suitable Steel Enamelled steel Yes Cast iron Yes Stainless steel If appropriately labelled by the manufacturer Aluminium Copper Brass
17. echnician or service Ss company o Failing to do so may result in electric shock fire an explosion problems with the product or injury a O Z n N Do not install this appliance near a heater inflammable material Do not install this appliance in a humid oily or dusty location in a location exposed to direct sunlight and water rain drops Do not install this appliance in a location where gas may leak This may result in electric shock or fire The appliance is not intended for installing in road vehicles caravans and similar vehicles etc a This appliance must be properly grounded Do not ground the appliance to a gas pipe plastic water pipe or telephone line This may result in electric shock fire an explosion or problems with the product Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes CAUTION SIGNS FOR INSTALLATION This appliance should be positioned in such a way that it is accessible to the power plug Failure to do so may result in electric shock or fire due to electric leakage Install your appliance on a level and hard floor that can support its weight Failure to do so may result in abnormal vibrations noise or problems with the product Install the appliance while maintaining the proper distance from the wall Failure to do so may result in fire due to overheating The minimum heigh
18. ectric shock burns or injury Never use this appliance for purposes other than cooking Failure to do so may result in fire Never heat plastic or paper containers and do not use them with the hob function SNOILONUYLSNI ALSAVS Failure to do so may result in fire Do not over heat food This may result in fire Do not heat food wrapped in paper such as magazines or newspaper This may result in fire Do not use or place inflammable sprays or objects near the hob This may result in fire or an explosion To heat beverages such as coffee tea liquor or water or dishes such as curry soup or stew use a low power setting and make sure to stir the contents while heating them Using a high power setting can cause the contents to boil over without warning and cause serious burns safety instructions _7 CTN464NC01_XSA_DG68 00348A 01 EN indd 7 D 13 10 2555 18 06 35 a SSE ee N Do not insert fingers foreign substances or metal objects such as pins or needles into the inlet outlet and holes If foreign substances are inserted into any of these holes unplug the power plug from the wall socket and contact your product provider or nearest service centre Failure to do so may result in electric shock or injury NEVER fill the container to the top and choose a container that is wider at the top than at the bottom to prevent the liquid from boiling over Bottles with narrow necks may also explode if
19. emishes on the ceramic a glass surface caused for example by a pan with sharp edges cannot be removed However they do not impair the function of the hob wm HOB FRAME OPTION A Do not use vinegar lemon juice or scale remover on the hob frame otherwise dull waenlns blemishes will appear 1 Wipe the frame with a damp cloth 2 Moisten dried debris with a wet cloth Wipe and rub dry TO AVOID DAMAGING YOUR APPLIANCE e Do not use the hob as a work surface or for storage e Do not operate a cooking zone if there is no pan on the hob or if the pan is empty e Ceramic glass is very tough and resistant to temperature shock but it is not unbreakable It can be damaged by a particularly sharp or hard object dropping onto the hob e Do not place pans on the hob frame Scratching and damage to the finish may occur e Avoid spilling acidic liquids for example vinegar lemon juice and descaling agents onto the hob frame since such liquids can cause dull spots e f sugar or a preparation containing sugar comes into contact with a hot cooking zone and melts it should be cleaned off immediately with a kitchen scraper while it is still hot If allowed to cool it may damage the surface when removed e Keep all items and materials that could melt for example plastics aluminium foil and oven foils away from the ceramic glass surface If something of this nature melts onto the hob it must be removed immediately with a
20. est service centre CAUTION SIGNS FOR ELECTRIC Unplug the power plug when the appliance is not being used for long periods of time or during a thunder lightning storm Failure to do so may result in electric shock or fire Unplug the power plug when the appliance is not being used for long periods of time or during a thunder lightning storm Failure to do so may result in electric shock or fire a SEVERE WARNING SIGNS FOR USING In the event of a gas leak such as propane gas LP gas etc ventilate immediately without touching the power plug Do not touch the appliance or power cord Do not use a ventilating fan A spark may result in an explosion or fire During use the appliance becomes hot Care should be taken to avoid touching heating elements inside the hob ALWAYS use hob gloves when removing a dish from the hob to avoid unintentional burn WARNING The contents of feeding bottles and baby food jars shall be stirred or shaken and the temperature checked before consumption in order to avoid burns If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard Children should be supervised to ensure that they do not play with the appliance WARNING Only allow children to use the hob without supervision when adequate instructions have been given so that the child is able to use the hob in a safe way and understands
21. ey show the following information B the appliance has been switched on Bio B selected heat settings residual heat Bthe child lock is activated and E eror message the touch sensor button has been touched for longer than 8 seconds error message when the hob is overheated because of abnormal operation example operation with empty cookware E error message cookware is unsuitable or too small or no cookware has been placed on the cooking zone e Keep warm Use this function to keep warm cooked food The display will show PA e a i Use this fuction to boil water The display will show p After completion cooking zone will automatically reduce to a lower power level Use Water boiling fuction only to heat water warnine Never leave the hob unattended when in use This may result in fire e Complete Bridge zone selector z Use this function to expand cooking zone into complete right side 18_ parts and features CTN464NC01_XSA_DG68 00348A 01 EN indd 18 D 13 10 2555 18 06 36 a SSE ee SAFETY SHUTOFF If one of the cooking zones is not switched off or the heat setting is not adjusted after an extended period of time that particular cooking zone will automatically switch itself off Any residual warmth will be indicated with H for hot in the digital displays corresponding to the particular cooking zones The cooking zones switch themselves off at the
22. f food being cooked Switch Setting Cookingmethod Examples for Use Warming Warming large amounts of liquid boiling noodles 14 15 Saut ing ea Frying searing meat browning goulash braising meat 10 13 Intensive Steak sirloin hash browns sausages pancakes Frying griddle cakes 8 9 Frying Schnitzel chops liver fish rissoles fried eggs 6 7 Boiling Cooking up to 1 5 liquid potatoes vegetables steaming Steaming and stewing of small amounts of 3 5 Stewing eae area vegetables boiling rice and milk dishes Boiling 1 2 Melting Melting butter dissolving gelatine melting chocolate The heat settings indicated in the table above are provided only as guidelines for your reference You will need to adjust the heat settings according to specific cookware and foods 28_ hob use CTN464NC01_XSA_DG68 00348A 01 EN indd 28 D 13 10 2555 18 06 39 ee cleaning and care HOB A Cleaning agents must not come into contact with a heated ceramic glass surface WARNING AJ Cleaning agents must be removed with adequate amounts of clean water after cleaning because they can have a caustic effect when the surface becomes hot Do not use any aggressive cleaners such as grill or oven sprays scouring pads or abrasive pan cleaners Clean the ceramic glass surface after each use when it is still warm to the touch This will prevent spillage from becoming burnt onto the surface Remove sc
23. f you use suitable cookware displayed message will automatically disapear mas should do if the cooling fan runs after the hob is turned off Check for the following e When you have finished using the hob the cooling fan runs by itself for cooling down e After the hob s electronics has cooled down the cooling fan will be turned off If you request a service call because of an error made in operating the appliance the visit from the customer service technician may incur a charge even during the warranty period SERVICE Before calling for assistance or service please check the section Troubleshooting If you still need help follow the instructions below Is it a technical fault If so please contact your customer service centre Always prepare in advance for the discussion This will ease the process of diagnosing the problem and also make it easier to decide if a customer service visit is necessary Please take note of the following information e What form does the problem take e Under what circumstances does the problem occur When calling please Know the model and serial number of your appliance This information is provided on the rating plate as follows e Model description e S N code 15 digits We recommend that you record the information here for easy reference Model Serial number When do you incur costs even during the warranty period e if you could have remedied the prob
24. following times J D Heat setting Switch off T 1 3 After 6 hours 5 4 6 After 5 hours z 7 9 After 4 hours u 10 15 After 1 5 hours S m n If the Hob is overheated because of abnormal operation will be displayed And the Hob will be switched off If cookware is unsuitable or too small or no cookware has been placed on the cooking zone g will be displayed And after 1 minute the corresponding cooking zone will be switched off Should one or more of the cooking zones switch off before the indicated time has elapsed see the section Troubleshooting Other reasons why a cooking zone will switch itself off All cooking zones will immediately switch themselves off if liquid boils over and lands on the control panel The automatic shutoff will also be activated if you place a damp cloth on the control panel In both of these instances the appliance will need to be switched on again using the main On Off control sensor after the liquid or the cloth has been removed RESIDUAL HEAT INDICATOR When an individual cooking zone or the hob is turned off the presence of residual heat is shown with an H for hot in the digital display of the appropriate cooking zones Even after the cooking zone has been switched off the residual heat indicator goes out only after the cooking zone has cooled You can use the residual heat for thawing or keeping food warm AN As long as the residual heat indicator is illuminated ther
25. ge zone 1800 W with Power Boost 2600 W Induction complete Bridge zone 3600 W with Power Boost 4600 W Control panel CONTROL PANEL DARON ee ey ea e i TMI a Cooking zone selectors Heat setting selectors Lock control sensor On Off control sensor Timer control sensor Indicators for heat settings and residual heat Keep warm Water boiling Complete Bridge zone selector PONOARON gt 16_ parts and features CTN464NC01_XSA_DG68 00348A 01 EN indd 16 D 13 10 2555 18 06 36 COMPONENTS LNI gt B Induction hob Installation brackets Screws o gt INDUCTION HEATING T e The Principle of Induction Heating When you place your cookware on a cooking zone and you turn it on the electronic circuits in your induction hob produce 5 induced currents in the bottom of the cookware which instantly raise cookware s mi temperature a gt Induced currents Induction coil ra oe Electronic circuits Ne P e Greater speed in cooking and frying As the pan is heated directly and not the glass the efficiency is greater than in other systems because no heat is lost Most of the energy absorbed is transformed into heat CTN464NC01_XSA_DG68 00348A 01 EN indd 17 parts and features _17 13 10 2555 18 06 36 a SSE ee THE KEY FEATURES OF YOUR APPLIANCE e Ceramic glass cooking surface The appliance has a ceramic glass cooking surface and fou
26. ic components of the hob BRIDGE CONTROL The bridge function can operate complete right side cooking zone for using large size cookware example oval cookware fish kettle 1 Touch the complete Bridge zone sensor key 2 Touch the heat setting selectors or Heat setting display of right side front rear will be changed together 26_ hob use CTN464NC01_XSA_DG68 00348A 01 EN indd 26 D 13 10 2555 18 06 38 a SSE ee WATER BOILING 1 Touch the corresponding cooking zone s key Asn JOH 2 Touch the Water boiling sensor 3 Set the desired power level which will be used after water boiling After water boiling the cooking zone will automatically reduce to this power level and an acoustic signal sounds Use Water boiling fuction only to heat water wanna Never leave the hob unattended when in use This may result in fire This is not available in the Complete Bridge zone The amount of water available for each cooking zone is as follows Cooking zone Amount of water 160 mm 1 Liter 2 Liters 210mm 1 Liter 3 Liters Front or Rear Bridge 1 Liter 3 Liters Use only water at room temperature The boiling temperature and time may differ depending on the amount of water the water temperature and the bottom type of the container Do not touch or remove the cookware while the Water boiling function is in progress However this function
27. ing liquids such as water or other beverages Avoid using a slippery container with a narrow neck Failing to do so may result in an abrupt overflow of the contents and cause burns Do not hold food or any part thereof during or immediately after cooking Use cooking gloves because it may be very hot and you could burn yourself When the surface is cracked turn the power switch of the appliance off Failure to do so may result in electric shock 8_ safety instructions CTN464NC01_XSA_DG68 00348A 01 EN indd 8 D 13 10 2555 18 06 35 a SSE ee Small amounts of food require shorter cooking or heating time If normal times are allowed they may overheat and burn Children should be supervised to ensure that they do not play with the appliance Any spillage should be removed from the lid before opening and the hob surface should be allowed to cool before closing the lid Model which has lid only N Do not stand on top of the appliance or place objects such as laundry hob cover lighted candles lighted cigarettes dishes chemicals metal objects etc on the appliance This may result in electric shock fire problems with the product or injury Do not operate the appliance with wet hands This may result in electric shock Do not spray volatile material such as insecticide onto the surface of the appliance As well as being harmful to humans it may also result in electric shock fire or problems with the
28. is AC 230 V The appliance also works perfectly on networks with AC 220 V or AC 240 V The hob is to be connected to the mains using a device that allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm eg automatic line protecting cut out earth leakage trips or fuse A The cable connections must be made in accordance with regulations and waama the terminal screws tightened securely GOH SHL ONITIVLSNI Once the hob is connected to the mains supply check that all cooking zones are warnins ready for use by briefly switching each on in turn at the maximum setting with suit able cookware When the hob is powered on for the first time all displays light and the child safety lock is activated A Pay attention conformity to phase and neutral allocation of house connection and warme appliance Connection schemes otherwise components can be damaged Warranty does not cover damage resulting from improper installation A Ifthe supply cord is damaged it must be replaced by a special cord or assembly wanne available from the manufacturer or its service agent e 1N e 2N Separate the 2 phase wires L1 and L2 before connection 220 240V 220 240N 380 415V Green Yellow Black i e Brown L N N For correct supply connection follow the wiring diagram attached near the warnine terminals D installing the hob _13 CTN464NC01_XSA_DG6
29. lem yourself by applying one of the solutions provided in the section Troubleshooting e if the customer service technician has to make several service calls because he was not provided with all of the relevant information before his visit and as a result for example has to make additional trips for parts Preparing for your phone call as described above will save you the cost of these trips 32_ warranty and service CTN464NC01_XSA_DG68 00348A 01 EN indd 32 D 13 10 2555 18 06 39 a SSE ee technical cata TECHNICAL DATA Width 575 mm g Appliance dimensions Depth 505 mm Height 56 mm g Width 560 mm 5 Worktop cut out dimensions Depth 490 mm Corner radius 3mm Connection voltage 220 240 V 50 60 Hz Maximum connected load power 7 2 KW Net 11 3 kg Weight Gross 14 2 kg COOKING ZONES Position Diameter Power Rear left 160 mm 1400 W Boost 2000 W Front left 210mm 2200 W Boost 3200 W Front Bridge 1800W Boost 2600W Rear Bridge 1800W Boost 2600W Complete Bridge 3600W Boost 4600W technical data _33 CTN464NC01_XSA_DG68 00348A 01 EN indd 33 D 13 10 2555 18 06 39 CTN464NC01_XSA_DG68 00348A 01 EN indd 34 13 10 2555 18 06 39 CTN464NC01_XSA_DG68 00348A 01 EN indd 35 13 10 2555 18 06 39 QUESTIONS OR COMMENTS COUNTRY CALL OR VISIT US ONLINE AT AUSTRALIA 1300 362 603
30. m of an H for hot hob use _23 CTN464NC01_XSA_DG68 00348A 01 EN indd 23 D 13 10 2555 18 06 37 SWITCHING A COOKING ZONE OFF To switch off a cooking zone return the setting to by using the control panel s control sensor To switch off more quickly touch the corresponding cooking zone s key twice USING THE CHILD SAFETY LOCK You can use the child safety lock to safeguard against unintentionally turning on a cooking zone and activating the cooking surface Also the control panel with the exception of the On Off control sensor can be locked in order to prevent the settings from being changed unintentionally for example by wiping over the panel with a cloth Switching the child safety lock on off 1 Touch the Lock control Fj sensor for approximately 3 seconds aes Garo i j i H i 7 9 11 13 15 P An acoustic signal will sound as confirmation Mn e 2 Touch any control sensor L will appear in the displays indicating the child safety lock has been activated 3 For switching the child safety lock off touch the Lock control A sensor again for 3 seconds An acoustic signal will sound as confirmation After switching off the appliance child safety lock will be activated automatically within some minutes for safety reasons 24_ hob use CTN464NC01_XSA_DG68 00348A 01 EN indd 24 D 13 10 2555 18 06 38 a SSE ee TIMER There are two ways to use the
31. may not operate properly when the cooking zone is already hot hob use _27 CTN464NC01_XSA_DG68 00348A 01 EN indd 27 D 13 10 2555 18 06 38 a SSE POWER MANAGEMENT The cooking zones have a maximum power available to them If this power range is exceeded by switching on the power boost function Power Management automatically reduced the heat setting of paired another cooking zone e Left side No 1 and No 2 is paired cooking zone e Right side No 3 and No 4 is paired cooking zone The indicator for this cooking zone changes from the heat setting set to maximum possible heat setting e Example Last heat setting of cooking Paired another cooking zone s heat setting No 4 zone No 3 original heat setting automatically changed heat setting Power Boost 15 level 13 level l4 When the complete Bridge zone function is activated Power Management automatically reduce the heat setting of left side No 1 and No 2 If the all left side No 1 and No 2 cooking zones are used maximum possible heat setting of complete Bridge zone is 15 i To use the power boost function g for complete Bridge zone switch off one of the left side cooking zone SUGGESTED SETTINGS FOR COOKING SPECIFIC FOODS The figures in the table below are guidelines The heat settings required for various cooking methods depend on a number of variables including the quality of the cookware being used and the type and amount o
32. nit in which the appliance is fitted must satisfy the stability requirements of DIN 68930 e For protection against moisture all cut surfaces are to be sealed with a suitable sealant e On tiled work surfaces the joints in the area where the hob sits must be completely filled with grout e On natural artificial stone or ceramic tops the snap action springs must be bonded in place with a suitable artificial resin or mixed adhesive e Ensure that the seal is correctly seated against the work surface without any gaps Additional silicon sealant must not be applied this would make removal more difficult when servicing e The hob must be pressed out from below when removed e Aboard is to be installed underneath the hob e The ventilation gap between the worktop and front of the unit underneath it must not be covered A The surface temperature on the underside of the electric hob may exceeds 95 C sation TO avoid hazard under bench access must be restricted 12_ installing the hob CTN464NC01_XSA_DG68 00348A 01 EN indd 12 D 13 10 2555 18 06 35 L SSE ee CONNECTING TO THE MAINS POWER SUPPLY Before connecting check that the nominal voltage of the appliance that is the voltage stated on the rating plate corresponds to the available supply voltage The rating plate is located on the lower casing of the hob Shutoff power to circuit before connecting wires to circuit WARNING The heating element voltage
33. ou are touching only one sensor panel when operating the appliance If your finger is too flat on the panel an adjacent sensor may be actuated as well 22 hob use CTN464NC01_XSA_DG68 00348A 01 EN indd 22 D 13 10 2555 18 06 37 SWITCHING THE APPLIANCE ON 1 Touch the Lock control aA sensor for approximately 3 seconds 2 The appliance is switched on using the On Off approx control Q sensor 1 sec Touch the On Off control C sensor for 1 second The digital displays will show B Asn JOH After the On Off control Q sensor has been actuated to switch on your appliance a heat setting must be selected within approximately 10 seconds Otherwise the appliance will switch itself off for safety reasons SELECT COOKING ZONE AND HEAT SETTING 1 For selecting the cooking zone touch the corresponding cooking zone s key 2 For setting and adjusting the power level touch the Heat setting selectors If more than one sensor is pressed for longer than 8 seconds fj amp will show in the heat setting display To reset touch the On Off control sensor SWITCHING THE APPLIANCE OFF To completely switch off the appliance use the On Off control Q sensor Touch the On Off control C sensor After switching off a single cooking zone or the entire cooking surface the presence of residual heat will be indicated in the digital displays of the corresponding cooking zones in the for
34. product Do not place the appliance over a fragile object such as a sink or glass object This may result in damage to the sink or glass object Take care when removing the wrapping from food that has just been taken out of the appliance Ifthe food is hot hot steam may be emitted abruptly when removing the wrapping and you may burn yourself Do not unplug the appliance by pulling at the power cord always grip plug firmly and pull straight out from the outlet Damage to the cord may cause short circuit fire and or electric shock Appliances are not intended to be operated by means of an external timer or separate remote control system SNOILONYLSNI ALJJVS Do not stare at the hob elements Model which was installed halogen lamp only After use switch off the hob element by its control and do not rely on the pan detector Model which was installed pan detector only way SEVERE WARNING SIGNS FOR CLEANING Do not clean the appliance by spraying water directly onto it Do not use benzene thinner or alcohol to clean the appliance This may result in discoloration deformation damage electric shock or fire Before cleaning or performing maintenance unplug the appliance from the wall socket Failure to do so may result in electric shock or fire For your safety do not use high pressure water cleaners or steam jet cleaners safety instructions _9 CTN464NC01_XSA_DG68 00348A 01 EN indd 9 D 13 10 2555 18
35. r rapid response cooking zones e Touch control sensors Your appliance is operated using touch control sensors e Easy cleaning The advantage of the ceramic glass cooking surface and the control sensors is their accessibility for cleaning The smooth flat surface is easy to clean e On Off sensor The On Off control sensor provides the appliance with a separate mains switch Touching this sensor switches the power supply on or off completely e Control and function indicators Digital displays and indicator lights provide information about settings and activated functions as well as the presence of residual heat in the various cooking zones e Safety shutoff A safety shutoff ensures that cooking zones switch off automatically after a period of time if the setting has not been changed e Residual heat indicator An icon for residual heat appears in the display if the cooking zone is so hot that there is a risk of burning e Power Boost P Use this function to heat up the contents of the pan faster than maximum power level B The display will show p e Auto Pan Detection Each cooking zone incorporates an automatic pan detection system the system is calibrated in order to recognize pans of a diameter just slightly smaller than the cooking zone Pans must always be placed centrally on each cooking zone And you should use suitable cookware e Digital displays The four display fields are assigned to the four cooking zones Th
36. t of free space necessary above the top surface of the hob Se SEVERE WARNING SIGNS FOR ELECTRIC Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis Unplug the power plug and clean it with a dry cloth Failure to do so may result in electric shock or fire safety instructions _5 CTN464NC01_XSA_DG68 00348A 01 EN indd 5 D 13 10 2555 18 06 35 a SSE ee Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor If you plug the power plug into the socket in the opposite direction the electric wires within the cable may be damaged and this may result in electric shock or fire N Plug the power plug into the wall socket firmly Do not use a damaged power plug damaged power cord or loose wall socket This may result in electric shock or fire Do not pull or excessively bend the power cord Do not twist or tie the power cord Do not hook the power cord over a metal object place a heavy object on the power cord insert the power cord between objects or push the power cord into the space behind the appliance This may result in electric shock or fire Do not pull the power cord when unplugging the power plug Unplug the power plug by holding the plug Failure to do so may result in electric shock or fire When the appliance or the cord is damaged contact your near
37. timer Using the timer as a safety shutoff If a specific time is set for a cooking zone the cooking zone will shut itself off once this period of time has elapsed This function can be used for multiple cooking zones simultaneously Using the timer to count down The countdown timer cannot be used if a cooking zone has been switched on Setting the safety shutoff The cooking zone s for which you want to apply the safety shutoff must be switched on 1 Using the Timer control sensor select the cooking zone for which the safety shutoff time is to be set After the first active cooking zone is selected touching the timer s control sensor will cause the corresponding indicator to flash slowly For example the front left indicator corresponds to the front left cooking zone H will appear in the timer display The next active cooking zone is selected by touching the Timer control 5 sensor again ASN JOH 2 Use the Timer setting selectors or to set the desired amount of time for example 15 minutes after which the cooking zone will automatically switch itself off The safety shutoff is now activated To display the time remaining for any of the cooking zones use the Timer control 1 sensor The corresponding control indicator will begin to blink slowly The settings are reset using the Timer setting selectors or O After the set period of time has elapsed the cooking zone autom
38. warmth indicator suddenly disappears This could be a result of one of two possibilities e The On Off sensor was accidentally actuated e The control panel is partially covered by a damp cloth or liquid What should do if after the cooking zones have been switched off residual warmth is not indicated in the display Check for the following possibility e The cooking zone was only briefly used and therefore did not become hot enough If the cooking zone is hot please call the customer service centre What should do if the cooking zone will not switch on or off This could be due to one of the following possibilities e The control panel is partially covered by a damp cloth or liquid e The child safety lock is on What should do if the A display is illuminated Check for the following e The control panel is partially covered by a damp cloth or liquid To reset press the On Off control sensor ASIAYSS ANY ALNVYYVM warranty and service _31 CTN464NC01_XSA_DG68 00348A 01 EN indd 31 D 13 10 2555 18 06 39 a SSE ee What should do if the display is illuminated Check for the following e The hob is overheated because of abnormal operation e After hob is cooled down press the On Off control sensor for resetting What should do if the display is illuminated Check for the following e Cookware is unsuitable or too small or no cookware has been placed on the cooking zone e I
39. y will not cover any damage that may occur as a result of improper installation Technical data is provided at the end of this manual REGULATIONS AND COMPLIANCE This appliance meets the following standards N 60835 1 and EN 60835 2 6 relating to the safety of electrical appliances for ousehold use and similar purposes N 60350 or DIN 44546 44547 44548 relating to the operating features of electric cookers hobs ovens and grills for household use N 55011 N 55014 2 N 61000 3 2 and N 61000 3 3 relating to basic requirements for electromagnetic compatibility EMC C This appliance complies with the following EU Directives e a Em R e o o o m m m m e 2006 95 EC Low Voltage Directive e 2004 108 EEC Electromagnetic Compatibility Directive SAFETY INSTRUCTIONS FOR THE INSTALLER e A device must be provided in the electrical installation that allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm Suitable isolation devices include line protecting cut outs fuses Screw type fuses are to be removed from the holder earth leakage trips and contactors e With respect to fire protection this appliance corresponds to EN 60335 2 6 This type of appliance may be installed with a high cupboard or wall on one side e Drawers may not be fitted underneath the hob e The installation must guarantee shock protection e The kitchen u
Download Pdf Manuals
Related Search