Samsung ERV Plus System Structure User Manual
Contents
1. Take care not to attach the nozzle too close It may damage the heat exchange element 5 Reassemble the heat exchange elements and maintenance cover gt Ifthe heat exchange element is damaged purchase it individually in a customer care center or an agency that you bought the product gt Make sure to turn off the sub power supply CAUTION Do not wash the heat exchange element It may decrease its efficiency RHFO25ETE IB E 30611A 5 indd 9 2014 08 24 9 seh 5 Final Checks amp User Tips Checking Up the Sub Power Supply The sub power supply is a device to prevent electric leakage due to the over current Install the sub power supply separately near the ventilator and turn it off when you clean the ventilator or you do not use the ventilator for a long period of time Turnon the sub power supply which is installed separately The sub power supply is not supplied with the ventilator Purchase the sub power supply individually gt Ifthe circuit breaker MCCB ELB is installed the sub power supply does not need to be installed mandatorily Recommended Operation Condition Install and operate the ventilator in between 15 C and 40 C If the ventilator is operated under the condition other than are indicated it may not operate due to the protective device in the vent2. the product warranty gt All of the manufacturing and packaging material used for your new appliance are compatible with the environment and can be recycled gt This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance 2014 08 24 S5 3 48 13 Name of Each Part h Body 3xx025 Exhaust Air i Return Air Body 035 050 080 100 Exhaust Air Dust filter Maintenance cover Heat exchange element b gt Outdoor Air Dust filter A iz Return Air Supply Air Electrical component box Maintenance cover Heat exchange element Inspection hole There is an inspection hole for cleaning and maintaining the dust filter and heat exchange element Lack of installation and maintenance space may cause injury or malfunction RHFO25ETE IB E 30611A 5 indd 5 P Inspection hole 025 f X S Inspection hole 660mm x 600mm S 3 035 050 080 100 9 a SN SE D N NX Jd t Inspection hole Model N mm 035 050 450 X 450 080 100 550 X 550 2014 08 24 Q seh 3 Cle
3. QUESTIONS OR COMMENTS COUNTRY CALL OR VISIT US ONLINE AT 1800 3000 8282 Toll Free INDIA 1800 266 8282 Toll Free www samsung com in support 30308282 Non Toll Free This product is RoHS compliant RHFO25ETE IB E 30611A 5 indd 12 2014 08 24 9 3 48 15 RHFO25ETE Series RHFO35ETE Series RHFOSOETE Series RHFO80ETE Series RHF100ETE Series 100 Recycled Paper imagine the possibilities Thank you for purchasing this Samsung product CN DB98 3061 1A 5 RHFO25ETE B E 30611A 5 indd 13 2014 08 24 25 3 48 16 RHFO25ETE_IB_E_30611A 5 indd 2 Contents PREPARATION m Safety Precautions 2 3 m Name of Each Part 5 RECOMMENDATIONS FOR USE m Cleaning the Dust Filter 6 m Cleaning the Heat Exchange Element m Final Checks amp User Tips a 10 Wires diferente M 11 This product has been determined to be in compliance with the Low Voltage Directive 2006 95 EC and the Electromagnetic Compatibility Directive 2004 108 EC of the European Union X Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environm
4. aning the Dust Filter Dust filter RHFO25ETE IB E 30611A 5 indd 6 J o25 Clean the dust filters at least twice a year However the cleaning frequency may vary according to the used period and condition of the ventilator Clean the dust filters more frequently in dusty place Make sure that the power supply is disconnected before cleaning the ventilator 1 Remove 3 screws on the maintenance cover 2 Take off the maintenance cover from the ventilator 3 Detach the dust filters by pulling them forward There are totally 2 dust filters on both sides of the heat exchange element 4 Remove all dust on the dust filters with a vacuum cleaner or a brush 5 Reassemble the dust filters and the maintenance cover Make sure to insert the dust filters correctly If not dust may accumulate on the heat exchange element decreasing the efficiency gt Change the dust filters in every two years However changing frequency may vary according to the used period and condition gt Ifthe dust filter is damaged purchase it individually in a customer care center or an agency that you bought the product gt Make sure to turn off the sub power supply 2014 08 24 95 3 48 14 B 035 050 080 100 Clean the dust filters at least twice a year However the cleaning frequency may vary according to the used period and condition of the ventilator Clean the dust filters more frequently in dusty place Ma
5. e electric shock the unit falling etc gt Do not spray inflammable gas or insecticides on the product It may cause fire or malfunction gt Do not let the discharged air from the product go directly to a burner because it may cause imperfect combustion Do not install the product in a place where it is exposed to inflammable gas leakage Contact the customer care center if the product is under water gt The first installation or reinstallation as well must be carried out by a licensed installer or qualified personnel Use the rated current fuse Please recycle or dispose of the packaging material for this product in an environmentally responsible manner Contact the customer care center or manufacturer if you want to repair the product Do not connect the electric heater to the product gt The manufacturer declines any liability for damage resulting from modifications or errors in the electrical or hydraulic connections 2014 08 24 9 seh 3 RHFO25ETE IB E 30611A 5 indd 4 gt If the power cable is damaged replace it by the manufacturer or qualified personnel to avoid the risk gt Turn the power off before repairing the product Do not let the coming air reach to a pet or plant directly for a long period of time gt Turn off the product and clean after it stops operating Do not use substances such as benzene thinner or alcohol to clean the surface of
6. e MCCB and ELB electric shock or fire may occur Disconnect the circuit breaker when you don t use the product for a long period of time to save energy gt Do not install the electric wire to get tension to avoid a hazard gt Do not handle the wired remote control with wet hands There is a risk of electric shock In case of gas leakage from another burner open the window and ventilate the room If not there may be a risk of explosion or fire Do not insert anything in the air intake or outlet gt Keep children away from the product RHFO25ETE IB E 30611A 5 indd 3 gt Never spill any kind of liquid into the product If this happen unplug or turn the main switch of the product off and contact an authorized customer care center gt Do not let the discharged air go back to the indoor through its air suction hole It can contaminate indoor air gt If strange noises burning smell or smoke come from the product disconnect the power supply immediately and consult an authorized service personnel gt Do not use the product as a ventilator for a burner If you use a burner with gas or gasoline you need to have separate ventilation system for the combustible apparatus gt Do not give excessive shock to the product Make sure to use the part provided or specified parts for the installation work The use of defective parts could cause an injury or leakage of water due to fir
7. e element by pulling it upward The heat exchange element is heavy Take care not to drop it Heat exchange 4 Remove all dust and particles on the heat exchange element with a nozzle element of a vacuum cleaner Take care not to attach the nozzle too close It may damage the heat exchange element 5 Reassemble the heat exchange element and the maintenance cover gt Ifthe heat exchange element is damaged purchase it individually in a customer care center or an agency that you bought the product J gt Make sure to turn off the sub power supply CAUTTION Do not wash the heat exchange element It may decrease its efficiency RHFO25ETE IB E 30611A 5 indd 8 2014 08 24 95 3 48 15 B 035 050 080 100 Clean the heat exchange element at least twice a year However the cleaning frequency may vary according to the used period and condition of the ventilator Clean the heat exchange element more frequently in dusty place Make sure that the power supply is disconnected before cleaning the ventilator 1 Remove 2 screws on the maintenance cover 2 Take off the maintenance cover from the ventilator 3 Detach the 2 heat exchange elements in order The heat exchange element is heavy Take care not to drop it There are 2 heat exchange elements in the ventilator Make sure clean them at once 4 Remove all dust and particles on the heat exchange elements with a nozzle of a vacuum cleaner
8. ent or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal 2014 08 24 2 3 48 18 Register your product at www samsung com global register Safety Precautions The following safety precautions are provided to protect the users safety and prevent property damage Make sure to read the followings and use the ventilator properly P Keep this user s manual together with the installation manual in a handy place so that you can find it whenever you need to see it after reading this manual thoroughly WARNING This indicates the possibility of serious injury or death Install the cables with supplied cables firmly Fix them securely so that external force is not to exerted to the terminal board If the connection or fixing is incomplete heat generation electric shock or fire may occur gt Install separate MCCB and ELB when installing the power cable If you do not install th
9. ilator Especially if outside temperature is under 15 C the ventilator does not operate at all Do not operate the ventilator when typhoon comes Water may get in the room through the ventilator due to the rain and heavy winds Avoid operating the ventilator in indoor or outdoor with high temperature and humidity since dew may form on the internal part of the product including the heat exchanger Especially avoid using it during the long rainy period in the summer Install condition Outdoor air condition Indoor air condition 0 40 C 80 RH below 15 40 C 80 RH below 0 40 C 80 RH below RHFO25ETE IB E 30611A 5 indd 10 2014 08 24 95 38 48 15 Troubleshooting Problem Explanation Solution The ventilator does not operate Check a power failure Check the sub power supply is on The air does not come out from the Check whether dust filter or heat exchange element is blocked by dust air outlet In case of dust accumulation it may decrease the efficiency of the ventilator Clean the dust filter and the heat exchange element frequently Check whether the air intake or outlet is blocked by dust Remove all dust in the air intake Water drops from the air intake Check whether the ventilator is operated in By Pass mode during heating RHFO25ETE IB E 30611A 5 indd 11 When heating make sure to operate the ventilator in Heat EX mode 2014 08 24 9 seh 5
10. ke sure that the power supply is disconnected before cleaning the ventilator 1 Remove 2 screws on the maintenance cover 2 Take off the maintenance cover from the ventilator 3 Detach the dust filters by pulling them forward There are totally 4 dust filters on both sides of the heat exchange element 4 Remove all dust on the dust filters with a vacuum cleaner or a brush 5 Reassemble the dust filters and maintenance cover Make sure to insert the dust filters correctly If not dust may accumulate on the heat exchange element decreasing the efficiency Change the dust filters in every two years However changing frequency may vary according to the used period and condition gt Ifthe dust filter is damaged purchase it individually in a customer care center or an agency that you bought the product gt Make sure to turn off the sub power supply RHFO25ETE IB E 30611A 5 indd 7 2014 08 24 9 seh 4 Cleaning the Heat Exchange Element J o25 Clean the heat exchange element at least twice a year However the cleaning frequency may vary according to the used period and condition of the ventilator Clean the heat exchange element more frequently in dusty place Make sure that the power supply is disconnected before cleaning the ventilator Screw 1 Remove 3 screws on the maintenance cover 2 Take off the maintenance cover from the ventilator 3 Detach the heat exchang
11. the product gt When you need to dispose of the unit consult your dealer gt Be sure that the dust filter is not exposed to direct sunlight gt Do not attempt to repair move modify or reinstall the product on your own Make sure that these installations are carried out by qualified personnel to avoid electric shock or fire Do not use the product to maintain machine food pet plant or cosmetics It may cause loss of property gt Be sure to insert the dust filter and clean the filter at least twice a year If dust accumulates in the filter it may decrease the efficiency of the product gt Put gloves on when you clean the dust filter or heat exchange element You may get hurt Do not pull the electric wire or touch the power plug with wet hands Do not touch the pipes connected to the product Dispose of the packaging material in accordance with the local requirements The maximum input power and current is measured according to the IEC Standard and the input power and current is measured according to ISO standard CAUTION This indicates the possibility of serious injury or damage to environments when operated incorrectly Do not clean the product by spraying water directly or with benzene thinner or alcohol Failure to observe the installation instruction or use of the unit under conditions other than those indicated in the manual will immediately invalidate
Download Pdf Manuals
Related Search