Home

Samsung 13.3" Series 5 Slim Notebook 500GB HDD NP535U3C User Manual (Windows 7)

1. Samsung Recovery Solution Optional Samsung Recovery Solution is a program that enables restoring or backing up the hard disk drive for when a problem occurs with the computer If the computer fails to boot up you can restore the computer by pressing the key in the booting screen s If the default storage device of the product is an SSD do not add a partition If you add a partition the recovery function will not work Samsung Recovery Solution may not be provided or the version may differ depending on the model In addition some functions may not be provided or may differ depending on the version For more information on using Samsung Recovery Solution please refer to the online help of the program The screen images in this document may differ from actual product If your computer does not have an internal ODD you need an external ODD connected to your computer to use the Backup Function or Restore Function using DVDs The System Software function may not be provided depending on the program version Chapter 4 Backup Restore Samsung Recovery Solution Functions Backup Restore Functions Complete Backup Backs up drive C A problem occurs Backup Function Backs up drive C or required folders and files e Data Backup Backs up important folders and files Restore Function Restores major Windows files drive C or folders and files to the previous state Basic Restor
2. pe Correct disposal of batteries in this product Pb Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material re use please separate batteries from other types of waste and recycle them through your local free battery return system USA ONLY This Perchlorate warning applies only to primary CR Maganese Dioxide Lithium coin cells in the product sold or distributed ONLY in California USA Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect Or call 877 278 0799 For battery recycling go to call2recycle org or call 1 877 723 1297 Product Specifications The system specifications may differ depending on the derived models For detailed system specifications refer to the prod
3. Media Power Options and Support Connecting an External Display Device gt For AMD graphics cards 1 Right click on the Desktop and select Graphics Properties gt Desktops and Displays gt My Digital Flat Panels gt Scaling Options Digital Flat Panel Adjust the size to the edges of the TV screen using the resize bar and click Apply Chapter 2 Using the computer RADEON GRAPHICS Catalyst Control Center Preferences Desktops and Displays My Digital Flar Panels Scaling Options Digital Flat Panel Scaling Options Digital Flat Panel Adjust the edges of your display area to better fit your digital flat panel Scaling Options Use the scaling values instead of the customized settin when the desktop resolution does not match your DFP resolution Connecting an External Display Device Setting up HDMI TV audio Optional You can configure the sound of the computer to be played through the HDMI TV You have to configure the sound device in the Control Panel whenever you connect the HDMI TV in order to hear sound from the computer on the TV 5 The screen images and terms may differ from actual product depending on the computer model 1 Right click over the Volume Control icon in the notification area at the bottom right of the Desktop and select Playback Devices Alternatively click the Control Panel gt Hardware and Sound gt Sound Chapter 2 Using the compu
4. If you place two fingers over the Touchpad and move them up down left or right the screen is scrolled up down left or right accordingly Or Zoom Functions If you place two fingers over the Touchpad together or apart the current image or text is Zoomed in or out Chapter 2 Using the computer You can move to the previous or next page when you are looking at a photo or surfing the Internet Page Move Function For example if you lightly brush three fingers to the left while you are looking at a web site you will return to the previous page Chapter 2 To u ch pad Using the computer Q Setting the Touchpad Sensitivity P PEUR ORNE he EIAN driver Click Start gt Control Panel gt Hardware and Sound gt Mouse If the touchpad reacts too sensitively or the pointer moves gt ELAN gt Options gt PalmTracking and then adjust the unintentionally please adjust the touchpad pointer speed and sensitivity sensitivity gt When using the Synaptics driver Adjusting the Touchpad Pointer Speed Click Start gt Control Panel gt Hardware and Sound gt Mouse oo gt Device Settings gt Settings gt SmartSense and then adjust Click Start gt Control Panel gt Hardware and Sound gt Mouse gt the sensitivity Pointer Options and then adjust the pointer speed When the touchpad pointer does not move smoothly Adjusting the Touchpad Palm Detection Function Slide the bar appropriately in the
5. TPM Status to Clear 1 Restart the computer When the Samsung logo screen appears press the F2 key ES ET ecurity repeatedly TPM Configuration TPM Support Enabled INo HT Security Chip State Disabled and Deactivated No Chanae Clear Enable and Activate Disable and Deactivate Press the F10 key to save the changes Using the TPM Security Device Optional seen hanna 5 If the system automatically restarts the PHYSICAL PRESENCE Q Press the F10 key to save the changes SCREEN appears Enter Y Q If the system automatically restarts the PHYSICAL PRESENCE PHYSICAL PRESENCE SCREEN SCREEN appears Enter Y TPM State has requested to change to Clear De you want to accept it PHYSICAL PRESENCE SCREEN Y Yes N No TPM State has requested to change to Enable and Activate Do you want to accept it Y Yes N No 6 When the computer restarts automatically and the Samsung logo screen appears press the F2 key repeatedly 1 Press the F10 key to save the changes The computer 7 Select the Security gt TPM Configuration gt Change TPM automatically restarts Initialization of the TPM chip has been Status item and set the item to Enable and Activate completed Now install the TPM program and register the TPM program Security TPM Configuration TPM Support Enabled NCA rer Security Chip State Disabled and Deactivated No Change Clear Enable and Activat
6. 2 or less Black dot 4 or less Combination of Bright and Dark 4 or less EL Instructions for Cleaning the LCD Clean the LCD panel with a soft cloth lightly moistened with computer cleansing detergent moving in one direction Cleaning the LCD panel with excessive force can damage the LCD Chapter 3 Settings and Upgrade Easy Settings Optional The Easy Settings is the integrated Samsung software control program that allows users to configure various settings gt This description is for models that support this function running on Windows 7 e The screen image and terminology may change depending on the model e Depending on the program version some functions may not be provided or different functions may be provided Press the key combination to launch the Easy Settings 2 Select an item to configure the corresponding function g Boot Optimization Power button settings Chapter 3 Settings and Upgrade You can configure Boot Optimization Power Button settings Lid Open Action Boot Management Optional If you select Samsung Fast Boot PARIS mode your PC will be optimized for the fastest booting time You can configure USB Charging Battery Life Extender Silent Mode Keyboard General backlit User Account Control Intel Rapid Start Technology You can configure Power Plan high performance power saving Samsung optimal mode Eco Mode the power saving settings
7. Directive 1999 5 EC Por medio de la presente Samsung declara que el Notebook PC cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999 5 CE Regulatory Compliance Statements it EAANVIKh Greek Francais French Italiano Italian Latviski Latvian Lietuvi Lithuanian Nederlands Dutch Malti Maltese ME THN MAPOY2A Samsung AHAONEI OTI Notebook PC 2YMMOPOONETAI MPO2 TIX OY2IQAEIZ ATAITHZEIZ KAI TIZ AOINED gt XETIKEZ AIATA EI2 TH OAHTIAZ 1999 5 EK Par la pr sente Samsung d clare que l appareil Notebook PC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999 5 CE Con la presente Samsung dichiara che questo Notebook PC conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999 5 CE Ar o Samsung deklar ka Notebook PC atbilst Direktivas 1999 5 EK butiskajam prasibam un citiem ar to saistitajiem noteikumiem iuo Samsung deklaruoja kad is Notebook PC atitinka esminius reikalavimus ir kitas 1999 5 EB Direktyvos nuostatas Hierbij verklaart Samsung dat het toestel Notebook PC in overeenstemming is met de essenti le eisen en de andere relevante bepalingen van richtlijn 1999 5 EG Hawnhekk Samsung jiddikjara li dan Notebook PC jikkonforma mal fti ijiet essenzjali u ma provvedimenti o rajn relevanti li hemm fid Dirrettiva
8. For Guadeloupe Martinique St Pierre et Miquelon Mayotte 2 400 2 4835 GHz for indoor and outdoor use For Reunion Guyane 2 400 2 4835 GHz for indoor use 2 420 2 4835 GHz for outdoor use channels 5 to 13 The low band 5 15 5 35 GHz is for indoor use only Regulatory Compliance Statements European Telecommunication Information for products fitted with EU approved modems Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999 5 EC Such marking is indicative that this equipment meets or exceeds the following technical standards CTR 21 Attachment requirements for pan European approval for connection to the analogue Public Switched Telephone Networks PSTNs of TE excluding TE supporting voice telephony services in which network addressing if provided is by means of Dual Tone Multi Frequency DTMF signaling E Although this equipment can use either loop disconnect pulse or DTMF tone signaling only the performance of the DTMF signaling is subject to regulatory requirements for correct operation It is therefore strongly recommended that the equipment is set to use DTMF signaling for access to public or private emergency services DTMF signaling also provides faster call setup Chapter 5 Appendix This equipment has been approved to Council Decision 98 482 EEC CTR 21 for Pan European single terminal connection to the
9. Plays CD or DVD titles Since an ODD Optical Disk Drive is optional the installed drive depends on the computer model You can secure the computer by connecting a lock and cable to the Security Slot Overview gt For 13 3 inch models e What is a chargeable USB port USB device accessing and charging functions are supported The USB charging function is supported regardless of whether the power is turned on or off Charging a device through a chargeable USB port may take longer than general charging Using the Chargeable USB function when the computer is running on battery power reduces the battery usage time The user cannot evaluate the charging status of the USB device from the computer This may not be supported for some USB devices You can turn the Chargeable USB function ON OFF by selecting the Easy Settings gt General gt USB Charging option Optional DC Jack oe Wired LAN Port as USB 3 0 Port Ss lt or Chargeable USB 3 0 Port SS Optional Digital Video Audio Port HDMI Hom Optional Ear set headset Jack A Monitor Port O Chapter 1 Getting Started A jack to connect the AC adapter that supplies power to the computer Connect the Ethernet cable to this port USB ports to which you can connect USB devices as well as a chargeable USB port are provided Using a chargeable USB port you can access or charge a USB device Ze The port can be disti
10. gt Advanced Mode Finely tuned 25 presets are arranged on a square according to their relative sound characteristics gt User Mode You can control a variety of sound effects Using the computer Wired Network prance A wired network is a network environment used for a company network or broadband internet connection at home Connecting to a Wired LAN through Windows 1 Open the wired LAN port cover and connect the LAN cable to Ze e Since these descriptions are written on the basis of the the LAN port latest operating system Windows 7 some of the content and the figures of the descriptions may differ depending on the operating system Since the procedures for other Windows operating systems are similar use the computer referring to these descriptions The figures used for the description are of a representative model Therefore the figures may differ from the real ones Click Start gt Control Panel gt Network and Internet gt Network and Sharing Center and click on Change adapter settings in the left menu pane gO SE Control Panel Network and Internet Network and Sharing Center a n Control Panel Home View your basic network information and set uy Manage wireless networks L x Change adapter settings SAMSUNG PC a ange advanced sharing This computer settings View your active networks You are currently not connectec Change your networking settings ET S
11. l tiquette d Industrie Canada identifie un quipement autoris Cette autorisation signifie que l quipement satisfait certaines exigences pour la s curit fonctionnement et protection des r seaux t l phoniques Le d partement ne garantie pas que l quipement fonctionne comme le d sirerait l utilisateur Avant d installer l quipement les utilisateurs doivent s assurer que leur connexion aux installations de la compagnie de t l communication locale soit permise L quipement doit tre galement install selon une m thode acceptable de connexion Dans certains cas l installation lectrique associ e un service de ligne individuel peut tre rallong par un connecteur homologu Le client doit savoir que Chapter 5 Appendix la conformit aux conditions pr c dentes ne garantit pas un fonctionnement parfait dans toutes les situations Les r parations de l quipement homologu doivent tre effectu es dans les installations de maintenance canadiennes autoris es par le fournisseur Les r parations ou modifications effectu es par l utilisateur sur cet quipement ou anomalies de l quipement peuvent faire que la compagnie de t l communication demande la d connexion de l quipement Les utilisateurs doivent s assurer pour leur propre protection que les raccordements lectriques la terre les lignes de t l phone et l infrastructure de la conduite d eau si il y en a sont connect s e
12. or warranty information please contact your local distributor If the equipment is causing harm to the telephone network the telephone company may request that you disconnect the equipment until the problem is resolved The user must use the accessories and cables supplied by the manufacturer to get optimum performance from the product No repairs may be done by the customer This equipment cannot be used on public coin phone service provided by the telephone company Connection to party line service is subject to state tariffs The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device including fax machines to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the date and time it is sent and an identification of the business or other entity or other individual sending the message and the telephone number of the sending machine or such business other entity or individual The telephone number provided may not be any number for which charges exceed local or long distance transmission charges In order to program this information into your fax machine refer to your communications software user manual Regulatory Compliance Statements Unintentional Emitter per ICES 003 This digital apparatus does not exceed the Class B limits for radio noise emissions fr
13. with a Notified Body Registration Number and the Alert Symbol is on the system label The power output of the wireless device or devices that may be embedded in you notebook is well below the RF exposure limits as set by the European Commission through the R amp TTE directive The low band 5 15 5 35 GHz is for indoor use only See 802 11b and 802 119 restrictions for specific countries or regions within countries under the heading European Economic Area Restrictions below Chapter 5 Appendix EU R amp TTE Compliance Statements Cesky Czech Dansk Danish Deutsch German Eesti Estonian English Espanol Spanish Samsung timto prohlasuje ze tento Notebook PC je ve shod se zakladnimi pozadavky a dalsimi prislusnymi ustanovenimi smernice 1999 5 ES Undertegnede Samsung erkl rer herved at f lgende udstyr Notebook PC overholder de v sentlige krav og vrige relevante krav i direktiv 1999 5 EF Hiermit erkl rt Samsung dass sich das Ger t Notebook PC in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschl gigen Bestimmungen der Richtlinie 1999 5 EG befindet K esolevaga kinnitab Samsung seadme Notebook PC vastavust direktiivi 1999 5 EU p hin uetele ja nimetatud direktiivist tulenevatele teistele asjakohastele s tetele Hereby Samsung declares that this Notebook PC is in compliance with the essential requirements and other relevant provisions of
14. zZ The location of the Emergency Battery Hole may differ depending on the model A device used to generate sound Turning the Computer On and Off Turning the computer on 1 Connect the AC adapter 2 Lift the LCD panel up 3 Press the Power button to turn the computer on Chapter 1 Getting Started When you turn the computer on for the first time the Windows activation screen appears About Windows Activation Follow the activation procedures according to the instructions on the screen to use the computer Adjusting the screen brightness When the computer runs on battery power the LCD brightness is automatically set to low Press the key combination to increase the screen brightness Turning the computer off Since the procedures to turn the computer off may differ sf depending on the installed operating system please turn the computer off according to the procedures for the purchased operating system e Save all your data before clicking on Shut down If Easy Settings is installed the system shutdown location may differ Turning the Computer On and Off Click Start gt Shut down mode EMEA to shutdown the computer Help and Support gt All Pro grams or e7 Magnifier 4 Solitaire Switch user Log off Lock gt All Programs Hibernate Quickly turning the computer on and off Optional Using the Samsung Fast On o
15. AC adapter that supplies power to the computer Connect the Ethernet cable to this port USB ports to which you can connect USB devices as well as a chargeable USB port are provided Using a chargeable USB port you can access or charge a USB device Ze The port can be distinguished by the 7 figure ss or 88 printed on the port of the product The USB 3 0 feature is optimized for Windows 7 For Windows XP the USB 3 0 feature may be restricted A port used to connect a monitor TV or projector supporting a 15pin D SUB interface p You can connect a VGA adapter optional a a You can connect an HDMI cable to this port Using this port you can enjoy digital video and audio on the TV This is the jack for connecting an ear set or headset Overview Bottom View gt For 13 3 inch models mn QI eee z AH G I iow Memory Compartment Cover Battery Emergency Hole Speaker Chapter 1 Getting Started The main memory is installed inside the cover This hole is to cut the power supply to the battery Insert and press one end of an unfolded paper clip into the hole it to cut the power to the battery For more information refer to About the function to cut the power supply to the internal battery in the Safety Precautions For more information refer to About the function to cut the power supply to the internal battery in the Safety Precautions
16. If the Infineon Security Platform message appears click No Click the Start gt Computer gt Organize gt Folder and Search Options gt View gt Hidden files and folders item select Show hidden files and folders and click OK Click the Start gt Computer gt Drive C gt ProgramData folder and delete the Infineon folder 6 Now the TPM Program has been deleted To use the TPM function please repeat the procedures of the TPM chipinitialization process Software Launcher Optional Using the Desktop management program you can quickly access frequently used programs and documents gt Method 1 Click Software Launcher in the taskbar gt Method 2 Click Start gt All Programs gt Samsung gt Software Launcher Using the Software Launcher you can register frequently used programs and launch them quickly gt The registered program may differ depending on the model Close Drag and drop 7 temis here Settings Chapter 2 Using the computer Adding a program Drag a program to be added from the Desktop or start menu path to the Drag and drop item s here area of the launcher gt Removing a program ji Drag a program to be removed from the launcher to the Desktop Setting a Boot Password Changing the Boot ad Fo or 14 4inchr n Le nod LCD Brightness Control Settings rec Q You can adjust the LCD brightness in 8 levels gt Maintaining the changed LCD brightness ev
17. If you press the Fn Lock key you can use the hot key functions without pressing the Fn key Lock If the Fn Lock function is On You can use the hot key functions without pressing the Fn key If the Fn Lock function is Off You can use a hot key function by pressing the Fn key the hot key at the same time Other Function Keys Optional If the hot keys do not work properly you have to install the Easy Settings Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse To use the touchpad the touchpad driver is required A built in Windows driver and a driver provided by the manufacturer are provided For a better performance using the driver provided by the touchpad manufacturer is recommended The driver provided by the touchpad manufacturer is already installed in this product by default when you purchase this product When you reinstall Windows or change the operating system using the driver provided by the corresponding manufacturer is recommended 4 e Touch the touchpad with your fingers only Anything other than your fingers such as a ball point pen will not be recognized by the touchpad e If you touch the Touchpad or press the Touchpad buttons while booting up the Windows boot time may be extended e Checking the touchpad manufacturer Click the Start gt Control Panel gt Hardware an
18. a moment the computer boots up in Restoration mode and the Samsung Recovery Solution screen appears For computers supporting the touch screen function the touch screen function does not work during Restore Mode In this case please use the touchpad or mouse Chapter 4 Backup Restore 2 If the initial menu screen appears click Restore zZ jae Samsung Recovery Solution mc PA Samsung x 7 Recovery Solution To view the troubleshooting method for each symptom click Select by Symptom Select by Symptom 2 If you click Select by Symptom the Select by Symptom menu appears If you select a symptom a recommended restoration option will blink Click the restoration option to continue Samsung Recovery Solution Optional Chapter 4 ns SS Backup Restore Select either Basic Restore or Complete Restore from the In the Advanced menu you can change the size of the hard Restore menu drive partitions e g C and D To restore the computer to the initial state click Computer Initial State and perform the restoration process according to the instructions that appear on the screen e Make sure to backup your data in advance as all data will be deleted after the partition size is changed The Advanced menu is only activated when the computer boots up in the restoration area by pressing the key during the booting sequence S
19. adding the balloon talk or frame effect Overview Status Indicators Tab Wray W E ii Y U Caps Lock A S G H J K L Shift Z x c V lt gt Shift N M End af i af ES ES 4 g i OT i EJ HDD ODD O Wireless LAN J ef ie Charge Status Chapter 1 Getting Started This turns on when the hard disk is or ODD being accessed This turns on when the wireless LAN is operating This shows the power source and the battery charge status Green When the battery is fully charged or the battery is not installed Red or orange When the battery is being charged Off When the computer is running on battery power without being connected to AC adapter This shows the computer operating status On When the computer is operating Blinks When the computer is in Sleep mode Overview Right View gt For 13 3 inch models gt For 14 inch models USB Port lt Optional Multi Card Slot J Optional Multi Card Slot 3 Optional USB Port lt gt Optional CD Drive ODD Optional Security Slot Chapter 1 Getting Started You can connect USB devices to the USB port such as a keyboard mouse digital camera etc A card slot supports multi cards A card slot supports multi cards You can connect USB devices to the USB port such as a keyboard mouse digital camera etc
20. and the User Password is also automatically disabled e The screen images and terms may differ from actual product depending on the computer model and driver version Setting a Supervisor Password If you set a Supervisor Password you need to enter the password when you turn the computer on or enter the BIOS Setup Setting only the Supervisor Password and User Password is not very secure You can use an HDD Password as well to increase the security level Chapter 3 Settings and Upgrade 1 Select the Security menu in the BIOS Setup 2 In the Set Supervisor Password item press lt Enter gt Supervisor Password Clear User Password Clear HDD Password Clear et User Passwore Enter Set HDD Password Enter Password on boot Disabled Enter a password press lt Enter gt re enter the password for confirmation and press lt Enter gt again The password can be up to 8 alohanumeric characters Special characters are not allowed The supervisor password has been set The supervisor password is required to turn the computer on or to enter the BIOS Setup e For some models if the password entered message appears in the Setup Notice window the settings are not complete until the lt Enter gt key is pressed Setting a Boot Password Chapter 3 Settings and Upgrade Setting a User Password Setting up a Hard Disk Drive Password Optional Using the User Password you can turn the computer o
21. and the display settings You can configure whether to use the Bluetooth and Wi Fi options Power Management Wireless Network Wired Network You can select automatic or fixed IP settings You can configure external display devices and the screen brightness color Desktop Background You can configure the Desktop Display Screen Saver background and the screen saver You can configure the sound mode Music SoundAlive Classic Concert Hall Movie 3D Depth Sound Mode Advanced etc EA Express cache Optional This solution improves the system boot and application loading performance A Fast Start function is only provided for models that support the Express Cache function Take care not to delete the Express Cache area BIOS Setup Chapter 3 Settings and Upgrade The BIOS Setup enables you to configure your computer hardware according to your needs Entering the BIOS Setup gt Use the BIOS setup to define a boot password change the 1 Turn the computer on booting priority or add a new device e Since incorrect settings may cause your system to 2 When the booting screen SAMSUNG logo appears press the malfunction or crash take care when configuring the BIOS F2 key to enter the BIOS Setup e The functions of the BIOS setup are subject to change for product function enhancement purposes e The BIOS Setup menus and items may differ depending on your computer model EA Turbo Control for
22. at utstyret Notebook PC er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999 5 EF Norsk Norwegian Bu belge ile Samsung bu Notebook PC nin T rkiye 1999 5 EC Y netmeli inin temel gerekliliklerine T rk e ve ilgili h k mlerine uygun oldu unu beyan eder To view the EU Declaration of Conformity for this product in English only go to http www samsung com uk support download supportDownMain do then search the model number of the product If the Declaration of Conformity for the model you are interested in is not available on our web site please contact your distributor Chapter 5 Appendix European Economic Area Restrictions Local Restriction of 802 11b 802 11g Radio Usage Note to integrator The following statements on local restrictions must be published in all end user documentation provided with the system or product incorporating the wireless product E Due to the fact that the frequencies used by 802 11b 802 11g wireless LAN devices may not yet be harmonized in all countries 802 11b 802 11g products are designed for use only in specific countries or regions and are not allowed to be operated in countries or regions other than those of designated use As a user of these products you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection
23. by means of a certified connector assembly The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment Users should make sure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas Regulatory Compliance Statements i To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself Contact the appropriate inspection authority or an electrician as appropriate The Ringer Equivalence Number REN assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5 D clarations sur les t l communications selon DOC pour des produits munis d un modem homologu par la IC
24. depending on your country The following mainly describes the shortcut keys Shortcut Keys Press both the Fn key and hot key at the same time Alternatively press the Fn Lock key as well as a hot key to use the hot key functions more easily gt Method 1 Shortcut Keys gt Method 2 1 Je Pete Shortcut Keys Keyboa rd Using niet Easy Settings The Samsung software control program the Easy Settings is launched Screen Brightness Control Controls the screen brightness FA CRT LCD Switches the screen output to the LCD or external monitor when an external monitor or TV is connected to the computer O F5 Turns the Touchpad function on or off Touchpad When using an external mouse only you can turn the Touchpad off F 7 6 q ute Press this button to turn the audio on or off Volume Control Controls the volume Silent Mode Reduces the Fan noise so that users can use the computer without hearing noise You can turn the wireless network device on or off Only for models with a wireless network device F q 8 q F TI p 11 rie Wireless network Keyboard Numeric Key For 15 6 inch models If you press the Num Lock key you can use the numeric keys Num Lock Chapter 2 Using the computer Performs the right click mouse function touchpad ot
25. direction of Minimum The palm detection function is to avoid malfunctions when the 5 palm touches the touchpad by mistake This function is provided by the touchpad driver provided by ARR the manufacturer When the touchpad pointer moves unintentionally excessively Slide the bar appropriately in the direction of Maximum Touchpad Touchpad On Off Function Locking with shortcut keys If you want to use the mouse only without using the touchpad you can turn the touchpad off To lock the touchpad function press the keys You can set the touchpad and touchpad button settings in the tabs that appear when clicking Start gt Control Panel gt Hardware and Sound gt Mouse Chapter 2 Using the computer Auto locking when connecting USB mouse gt When using the Elan driver Click Start gt Control Panel gt Hardware and Sound gt Mouse gt ELAN and check the Disable When external USB mouse plug in option This will turn the touchpad off when a USB mouse is connected gt When using the Synaptics driver Click Start gt Control Panel gt Hardware and Sound gt Mouse gt Device Settings and check the Disable internal pointing device when external USB pointing device is attached in option This will turn the touchpad off when a USB mouse is connected EA This auto locking function is not provided for some models CD Drive ODD Optional An optical disk drive is optional and
26. general system files must not be deleted or moved Chapter 5 Appendix TCP IPv4 This is a 4 byte 32 bit address system separated into each byte 8 bits by a dot and each byte is represented as a decimal number USB Universal Serial Bus This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS 2 The data transmission specifications are one of the interface Standards used to connect a computer to peripheral devices These specifications include USB 1 0 1 1 2 0 and 3 0 It is appropriate to support peripheral devices that require high data rates such as an AV device secondary HDD or CD RW The higher the version e g USB 3 0 the higher the data rate provided Windows Media Player A multimedia program included with Windows Using this program you can play a media file create an audio CD listen to a radio broadcast search and manage media files and copy files to a portable device etc Index AP Battery BIOS Setup Booting Priority C CD Drive Charge Click D Double Click Drag Dual View 64 90 81 86 43 90 38 38 38 49 L LCD Brightness M Memory Monitor Connection Output Multi Card Slot O Overview P Password Product Specifications R Recorder 78 87 48 45 25 83 131 58 S Safety Precautions Samsung Recovery Solution Scroll Security Slot Shortcut
27. is provided with this equipment This equipment is designed to be connected to the telephone network or promises wiring using a compatible modular jack which is Part 68 compliant See Installation Instructions for details The REN is used to determine the quantity of devices which may be connected to telephone line Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call In most but not all areas the sum of RENs should not exceed five 5 0 To be certain of the number of devices that may be connected to a line as determined by total RENs contact the local telephone company to determine the maximum REN for the calling area If the terminal equipment causes harm to the telephone network the Teleohone Company will notify you in advance that temporary discontinuance of service may be required But if advance notice is not practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary The telephone company may make changes in its facilities Chapter 5 Appendix oO equipment operations or procedures that could affect the operation of the equipment If this happens the telephone company will provide advanced notice in order for you to make necessary modifications to maintain uninterrupted service If trouble is experienced with this equipment Modem for repair
28. is turned off while running a program e Sudden impact or movement to the computer while the hard disk drive is operating may cause files to be corrupted or bad sectors on the hard disk To prevent data loss due to damage to the hard disk drive please backup your data frequently Safety Precautions Chapter 1 Getting Started Using the power supply in an airplane When using the AC power plug Connect the power plug pins perpendicular into the center of the Since the power outlet type differs depending on the type of power outlet airplane connect the power appropriately 2 Since the representative figures of the power plug and e If the plug pins are not inserted into the center of the holes the the auto adapter are used they may differ from the actual plug pins are only inserted up to half their length In this case parts reconnect the power plug e You have to insert the power plug into the outlet when the power indicator LED of the power outlet is lit green If the power is connected properly the power indicator LED remains green Otherwise the power indicator LED is turned off In this case unplug the power check if the power indicator LED is green and then reconnect the power plug Power Indicator LED 220V Power Plug 110V Power Plug Good Example Wrong Example X Safety Precautions abated When using the auto adapter When the cigar socket is provided you have to use the
29. must be turned on e You have to additionally purchase the USB cable necessary to connect the computer and the device Chapter 2 Using the computer 2 The Auto run window appears Click Open folder and view files If the window does not appear click Start gt Computer _ Removable Disk F Mixed content options Play using Windows Media Player Import pictures el using Windows View pictures using Windows View pictures using Windows Media Center FEN Speed up my system mae using Windows ReadyBoost Set AutoPlay defaults in Control Panel 3 Double click the corresponding drive You can then save move or delete data Devices with Removable Storage 2 DVD Drive E Removable Disk F The device name of the card drive may differ depending on the model Adjusting the Volume You can adjust the volume using the keyboard and the volume control program Adjusting the Volume using the Keyboard Alternatively press the key combination to turn the volume on or Off Adjusting the Volume using the Volume Adjustment Program Click the Volume icon lion the taskbar and slide the volume control bar to adjust the volume Mute Chapter 2 Using the computer The procedures to record sound using the Windows Recorder are described below Using the Sound Recorder 1 Connect a microphone to the microphone jack You can also use the internal MIC
30. of frequency and channel for the country or region of use Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such Regulatory Compliance Statements The European variant is intended for use throughout the European Economic Area However authorization for use is further restricted in particular countries or regions within countries as follows General European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power EIRP and the frequency range 2400 2483 5 MHz The low band 5 15 5 35 GHz is for indoor use only Belgium The product may be used outdoors but for outdoor transmissions over a distance of 300m or more a license from the BIPT is required This restriction should be indicated in the manual as follows Dans le cas d une utilisation priv e l ext rieur d un b timent au dessus d un espace public aucun enregistrement n est n cessaire pour une distance de moins de 300m Pour une distance sup rieure a 300m un enregistrement aupr s de l IBPT est requise Pour une utilisation publique l ext rieur de b timents une licence de l IBPT est requise Pour les enregistrements et licences veuillez contacter l IBPT Chapter 5 Appendix France For Metropolitan departments 2 400 2 4835 GHz for indoor use 2 400 2 454 GHz channels 1 to 7 for outdoor use
31. pas provoquer d interf rences nuisibles et 2 2 ce dispositif doit accepter toute interf rence re ue y compris les interf rences qui peuvent provoquer des anomalies dans le syst me Afin de pr venir des interf rences de radio au service autoris ce dispositif est pr vu pour tre utilis l int rieur et loign des fen tres pour fournir une protection maximum Un quipement ou son antenne de transmission qui est install l ext rieur est sujet une autorisation i Les dispositifs sans fil ne peuvent pas tre r par s par l utilisateur Ne les modifiez en aucune fa on La modification d un dispositif sans fil annulera votre autorisation son utilisation Contactez le fabricant pour la r paration Chapter 5 Appendix Telecommunications per DOC notice for products fitted with an IC compliant modem The Industry Canada label identifies certified equipment This certification means that the equipment meets certain telecommunications network protective operation and safety requirements The Department does not guarantee the equipment will operate to the users satisfaction Before installing this equipment users should make sure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection In some cases the inside wiring associated with a single line individual service may be extended
32. power output Before a new model is available for sale to the public it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC Tests for each model are performed in positions and locations e g at the bottom on the body as required by the FCC For body worn operation this model has been tested and meets the FCC RF exposure guidelines when used with a Samsung accessory designated for this product Non compliance with the above restrictions may result in violation of FCC RF exposure guidelines SAR information on this and other model can be viewed on line at http www fcc gov oet ea fccid This site uses this product FCC ID number on the outside of the product Sometimes it may be necessary to remove the battery pack to find the number Once you have the FCC ID number for a particular product follow the instructions on the website and it should provide values for typical or maximum SAR for a particular product Regulatory Compliance Statements FCC Part 68 If fitted with a modem device This equipment complies with part of the FCC rules On the back of this equipment is a label that contains among other information the FCC registration number and ringer equivalence number REN for this equipment If requested this information must be provided to the telephone company This equipment uses the following USOC jacks RJ11C An FCC compliant telephone cord and modular plug
33. use these descriptions for reference Example SD Card Multi Card Slot Optional The card drive appears Click Open folder and view files If the window does not appear click Start gt Computer _ Removable Disk F gt Mixed content options Play using Windows Media Player le Si Import pictures J using Windows View pictures using Windows View pictures using Windows Media Center General options Open folder to view files using Windows Explorer Speed up my system ame using Windows ReadyBoost Set AutoPlay defaults in Control Panel If a window asking to scan and change appears click Continue Without Scanning This will proceed to Step 2 above Chapter 2 Using the computer You can save move and delete data by double clicking the corresponding drive You can only use the card after formatting it Devices with Removable Storage 2 DVD Drive E Dr Removable Disk F The device name of the card drive may differ depending on your computer model Using a Mini SD Since the above cards are too small you cannot insert the cards into the slot directly Insert the card into the dedicated adapter available from most electronic retailers and then insert the adapter into the multi card Slot Multi Card Slot Optional To remove a memory card Take hold of the end of the card and remove the card To format a memory card When u
34. 1999 5 EC Magyar Hungarian Polski Polish Portugu s Portuguese Slovensko Slovenian Slovensky Slovak Suomi Finnish Svenska Swedish Chapter 5 Appendix Alul rott Samsung nyilatkozom hogy a Notebook PC megfelel a vonatkoz alapveto k vetelm nyeknek s az 1999 5 EC ir nyelv egy b eldirasainak Niniejszym Samsung o wiadcza Se Notebook PC jest zgodny z zasadniczymi wymogami oraz pozosta ymi stosownymi postanowieniami Dyrektywy 1999 5 EC Samsung declara que este Notebook PC est conforme com os requisitos essenciais e outras disposi es da Directiva 1999 5 CE Samsung izjavlja da je ta Notebook PC v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolo ili direktive 1999 5 ES Samsung t mto vyhlasuje e Notebook PC spina z kladn po iadavky a v etky pr slu n ustanovenia Smernice 1999 5 ES Samsung vakuuttaa t ten ett Notebook PC tyyppinen laite on direktiivin 1999 5 EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen H rmed intygar Samsung att denna Notebook PC star verensst mmelse med de v sentliga egenskapskrav och vriga relevanta best mmelser som framgar av direktiv 1999 5 EG Regulatory Compliance Statements H r me l sir Samsung yfir v a Notebook PC er samr mi vi grunnkr fur og a rar kr fur sem ger ar eru tilskipun 1999 5 EC slenska Icelandic Samsung erkl rer herved
35. 2 Right click over the Volume icon fi on the taskbar and select Recording Device 3 Check if the microphone is set as the default recording device If this is the case it is already set as the default device If not right click over the microphone and select Set default Click Start gt All Programs gt Accessories gt Sound Recorder and click Start recording to start a recording Adjusting the Volume Using SoundAlive Optional The SoundAlive function enables you to experience more stereophonic sound using stereo speakers e SoundAlive is only supported in Windows 7 e The software programs provider may vary depending on your computer model e In addition some pictures may differ from actual product depending on the computer model and software version 1 Right click over the Volume Control icon in the notification area at the bottom right of the Desktop and select Playback Devices Alternatively click the Control Panel gt Hardware and Sound gt Sound 2 Right click over the Speakers and select Properties 3 Select the SoundAlive tab and select one of the modes Chapter 2 Using the computer gt Basic Mode Music Select this mode to listen to music Movie Select this mode to watch a movie Speech Emphasizes voice over other sounds Silver Silver mode is for people who have difficulty in hearing 3D Depth Provides 3D depth perception for movie and Sound Mode game sounds
36. D video is digital unlike VHS analog video and supports MPEG2 compression and digital audio To play a DVD a DVD drive is required Firewall A security system used to protect an internal network or intranet from external networks through an authentication procedure HDMI This is a digital video audio interface specification that transmits video and audio signals over a single cable Hibernation Mode A power mode that saves all data in memory to the hard disk and turns the CPU and hard disk off When canceling Hibernation Mode all application programs that were running are restored to their last State Icon This refers to a small image that represents a file that users can use IEEE802 XX This is a set fo specifications developed by the 802 committee of IEEE for the LAN connection method called XX LAN Local Area Network A communications network connecting computers printers and other devices within a local area such as within a building A LAN enables all connected devices to interact with other devices on the network The current LAN uses the Ethernet media access control method developed in the early 1980s To connect to an Ethernet a network card called a LAN card Ethernet card or network interface card is required To exchange data between computers a protocol is required besides the hardware equipment Windows Vista uses TCP IP as the default protocol LCD Liquid Crystal Display There are Passive Matr
37. Do not heat the product or battery or expose it to heat e g inside a vehicle during the summer There is a danger of explosion or fire Safety Precautions ED Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product Usage Related Do not place a candle light cigar etc over or on the product There is a danger of fire Use a wall outlet or multi plug with a grounding part Failure to do so may cause electric shock hazard Make sure to have the product tested by a safety service engineer after repairing the product Authorized Samsung Repair Centers will carry out safety checks after a repair Using a repaired product without testing it for safety may cause an electric shock or fire In case of lightning immediately turn the system off disconnect the power cord from the wall outlet and phone line from modem Do not use a modem or phone There is a danger of electric shock or fire Do not use your computer and AC Adapter on your lap or soft surfaces If the computer temperature increases there is a danger of burning yourself Chapter 1 Getting Started Connect only permitted devices to the connectors or ports of the computer Failure to do so may cause electric shock and fire Close the LCD panel only after checking if the notebook computer is turned off The temperature may rise and it may cause overheating and deformation of the prod
38. KB 1 024 Bytes and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity This is due to the difference in capacity calculation and does not mean the installed HDD is different from the product specifications e The capacity representation in Windows may be smaller than the actual capacity because some programs occupy a certain area of the HDD outside of Windows e For models with Samsung Recovery Solution the HDD capacity representation in Windows may be smaller than the actual capacity because Samsung Recovery Solution uses a hidden area of about 5 20GB of the HDD to save the recovery image and that hidden area is not counted towards the total size available to Windows The size of Samsung Recovery Solution varies by models because of the different size of applied programs Chapter 5 Appendix Q amp A Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE Symbol Information Product Specifications Glossary Index Q amp A Q What is the Intel Rapid Start technology The Intel Rapid Start technology allows you to create a disk partition in max power saving mode so that the system boots up faster which decreases the wakeup time from max power saving mode In the Easy Settings go to General gt Intel Rapid Start and select On It will be active immediately after you press the Power button while the system is in max po
39. Key Status Indicators Supervisor Password T Touchpad U User Password V Volume Control W Wired Network Wireless Network Chapter 5 Appendix 96 40 94 34 26 83 37 84 58 60 64
40. Public Switched Telephone Network PSTN However due to differences between the individual PSTNs provided in different countries the approval does not of itself give an unconditional assurance of successful operation on every PSTN termination point In the event of problems you should contact manufacturer Technical Support WEEE Symbol Information Correct disposal of this product wee Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Chapter 5 Appendix
41. SATA HDD XXXXXXXXXXXX 3 USB CD N A 4 USB FDD N A 5 USB HDD N A 6 NETWORK N A Press the F10 key to save the settings and exit Setup The highest boot priority device is now set to the Hard Drive e If you need to boot to DOS using a USB device enter the BIOS Setup select the Advanced menu and set the Fast BIOS Mode item to Disabled Upgrading Memory PR true One or more memory modules are installed on the computer Adding or Replacing Memory Modules Users can replace the memory modules or add new memory modules using 1 of the slots 1 Disconnect the AC power adapter after turning off the computer Ze Replace or install a new memory module only after 2 Insert an object such as a paper clip into the Emergency i shutting the computer down completely and separating Hole at the bottom of the computer to cut the battery power If the Power button does not work anymore that means you e Itis recommended that you add a memory module with successfully shut the power off the same specification the same manufacturer and the same capacity the AC adapter from the computer If you proceed without pressing the Emergency Hole the e The images used for the illustration are of a representative main board and the memory module may be damaged model therefore the images may differ from the the actual product Emergency Hole e The location of the Emergency Battery Hole may differ depend
42. Un am ed Authentication Using the TPM Security Device Optional 5 lf the status not initialized message appears click Yes If you backup the emergency recovery file to an external storage device according to the instructions of the Initialization Wizard you can use the TPM security device more Safely 3 Select a Security Platform Feature and set a basic user password The Security Platform is now ready for construction Click Next to start constructing the Security Platform If the Initialization Wizard completion window appears click Finish Chapter 2 Using the computer The user registration for the TPM program has been completed You can encrypt files and folders by using the encryption file system and use files and folders to be encrypted by creating or copying them to the virtual drive The virtual drive is created in the following location Owe jM gt Computer gt v gt I Search Ca Organize System properties gt gt aa B Downloads T E Recent Places Libraries Ga a Documents Local Disk a Music Pictures E Videos Hard Disk Drives 2 4 Devices with Removable Storage 2 amp Local Disk C DVD RW USBDrive T USBDrive T4 E _ ca Personal Secure M Computer hi Network Tr SAMSUNG PC Workgroup WORKGROUP a Processor Intel R Core TM i5 CPU M520 2 40GHz Using the TPM Security Device Optional Us
43. User Guic Z Getting Started 92 Using the Computer SN 1T 4 Settings and Upgrade 3 3 Backup Restore _ Contents oe lt SI SPAT Contents Chapter 3 Settings and Upgrade 3 Tips 78 LCD Brightness Control 4 Before You Start 80 Easy Settings Optional 7 Safety Precautions 81 BIOS Setup 22 Proper Posture During Computer Use 83 Setting a Boot Password 25 Overview 86 Changing the Boot Priority 31 Turning the Computer On and Off 87 Upgrading Memory 90 Battery 94 Using the Security Slot For 14 inch models optional Chapter 2 Using the Computer 34 Keyboard 37 Touchpad Chapter 4 Backup Restore 43 CD Drive ODD Optional 45 Multi Card Slot Optional 96 Samsung Recovery Solution Optional 48 Connecting an External Display Device 57 Connecting an External Digital Device Chapter 5 Appendix 58 Adjusting the Volume 60 Wired Network 109 Q amp A 64 Wireless Network Optional 110 Important Safety Information 67 Using the TPM Security Device Optional 112 Replacement Parts and Accessories 76 Software Launcher Optional 114 Regulatory Compliance Statements 130 WEEE Symbol Information 131 Product Specifications 133 Glossary 137 Index Before You Start Safety Precautions Tips Q lt u The computer is not turning on or does not respond and displays a blank screen Restore the computer using Samsung Recovery Solution 1 Turn the
44. amsung Recovery Solution x FA Samsung my Recovery Solution Complete Restore This is the program that backs up the current state of the computer and restores Windows when a problem occurs with the computer En Since a Complete Restore deletes all user data as well as additionally installed programs please backup your important data first using the Data Backup function before running Complete Restore Restores the entire Windows drive to the initial or backup status of the computer All current data on Wi ws drive is removed Windows drive is removed and the data will be restored at the time selected below You may need to reinstall some software after the Restore Select a Restore time and click the Next button s chmeiveehe Caution Make sure to connect the power while the Restore is in progress If the power is turned off during a Restore you have to restart the Restore from the beginning The computer boots up into restoration mode and the restoration progress message appears If you click OK the restoration begins The restoration may take some time please wait for a moment srl Run Complete Restore if the computer does not work even after Basic Restore has been completed 5 When the Restart the System message appears after the restoration is complete click OK to restart the system tT Make sure that the power cord is connected while the restoration is in process The firs
45. ardware and Sound gt In this case although the battery use time Power Options increases the battery life is reduced Alternatively right click the power measuring device icon This mode maintains 80 of the battery charge ti in the notification area of the taskbar and select Power ON when using the computer on AC power In this Options case although the battery use time decreases the battery life is extended 2 If the following screen appears select one of the modes Ze Alternatively to extend the battery life Press the F2 key when the Samsung logo appears in the booting sequence to enter the BIOS Setup select Advanced gt Battery Life Cycle Extension and set it to Enable Then you can use the battery life cycle extension mode Power plans can help you maximize your computer s performance or conserve energy Make a plan active by selecting it or choose a plan and customize it by changing its power settings Tell me more about power plans Select a power plan Plans shown on the battery meter Samsung Optimized Change plan settings Power saver Battery life 220000 Change plan settings Performance Battery Using the Battery Calibration Function When charging discharging the battery repeatedly for a short time only the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display In this case the actual battery charge and the remaining charge displa
46. attery Measuring the Remaining Battery Charge You can view the battery charge status by completing the following procedures Confirming the battery charge in the Taskbar Disconnect the AC adapter and move the mouse cursor over the battery icon in the system tray of the Taskbar to confirm the remaining battery charge 96 remaining 10 35 AM 7 21 2009 E 3 C Battery Usage Time Information A battery is an expendable supply so when using it over a long time the capacity battery life is shortened If the battery life is reduced to under half of its initial time we recommend purchasing a new battery When not using the battery for a long time store the battery after charging it to 30 40 of its capacity This extends the battery life time Chapter 3 Settings and Upgrade Extending the Battery Usage Time Decreasing the LCD Brightness Press the keys on the keyboard to decrease the LCD brightness to extend the battery usage time Chapter 3 Batte ry Settings and Upgrade Q Using the power management program Extending the Battery Life Optional This program helps you use the battery more efficiently In the Easy Settings program click General and set the Battery and supports the power mode optimized for the operating Life Extender to ON or OFF environment This mode maintains 100 of the battery charge when using the computer on AC power OFF 1 Click Start gt Control Panel gt H
47. auto adapter optional Insert the cigar plug of the auto adapter into the cigar socket and connect the DC plug of the auto adapter to the power input port of the computer Auto Adapter Lu 1m Cigar Plug In flight Cigar Socket When using the Airplane Charging Converter Depending on the airplane you have to use the auto adapter and charging converter Connect the airplane charging converter optional to the auto adapter optional and then insert the airplane power input jack into the power outlet Charging 1 Connect this end to Converter the auto adapter de gt RS Le Connect the airplane power 2 gt input jack to the power outlet of the airplane Proper Posture During Computer Use Maintaining a proper posture during computer use is very important to prevent physical harm The following instructions are about maintaining a proper posture during computer use developed through human engineering Please read and follow them carefully when using the computer Otherwise the probability of RSI Repetitive Strain Injury from repeated operations may increase and serious physical harm may be caused e The instructions in this manual have been prepared so that they can be applied within the coverage of general users e If the user is not included in the coverage the recommendation is to be applied according to the user s needs Proper Posture Adjust the heights of desks and chairs approp
48. ay differ depending on the model Some usage procedures may differ depending on the version e For detailed usage procedures refer to the description in the Touchpad Settings window e Since these descriptions are written on the basis of the latest operating system Windows 7 some of the content and the figures of the descriptions may differ depending on the operating system Since the procedures for other Windows operating systems are similar use the computer referring to these descriptions Using the Touchpad you can use the following additional Gesture functions Scroll function Zoom functions Page Move Function Chapter 2 Using the computer Configuring the Gesture Function Some gesture functions may not be configured In this case you can configure them using the following path 1 gt When using the Elan driver Click the Start gt Control Panel gt Hardware and Sound gt Mouse gt ELAN gt Options button gt When using the Synaptics driver Click the Start gt Control Panel gt Hardware and Sound gt Mouse gt Device Settings tab gt Settings button 2 The Touchpad Settings window appears Click over the corresponding item to select the item in the Select an item and click OK To cancel the Gesture function unselect the corresponding item in the Touchpad Settings window and click OK Touchpad The Scroll Function This function is the same as the scroll area of the Touchpad
49. computer on and press the F4 key when the booting screen SAMSUNG logo appears 2 The computer will boot up in restore mode after a short while and Samsung Recovery Solution appears 3 When the start menu screen appears click Restore Pressing Fn shortcut keys F1 F12 simultaneously does not work Press the Fn Lock If the Fn Lock OFF message appears on the screen press the Fn key a hot key at the same time Press Fn Lock key first and then press shortcut keys F1 F12 while Fn Lock ON appears Install Easy Settings want to restore the computer to the state when it was purchased If you use the Samsung Recovery Solution function you can easily and quickly restore the computer to a previous state even if you do not have a separate OS recovery DVD or recovery CD Chapter 1 Getting Started cannot boot up into DOS using a USB device To boot up into DOS using a USB device enter the BIOS Setup select the Advanced menu and set the Fast BIOS Mode item to Disabled want to connect an external monitor TV or projector Connect the display device and the computer with the monitor and repeatedly press the F4 key while holding Zag down the Fn key When I turn the computer on for the first time after purchasing it the computer does not turn on To turn the computer on for the first time you have to connect the AC adapter and then press the power button The power from the internal battery of
50. connected to this card slot Protocol A protocol is a set of rules used by computers to communicate with each other across a network A protocol is a convention or standard that controls or enables the connection communication and data transfer between computing endpoints It defines the data transmission procedures and the transmission medium for more efficient network functions Quick Launch This refers to a toolbar that can be configured so that you can launch a program such as Internet Explorer or display the Windows Desktop with one click You can add any icon to the quick launch area of the Taskbar and launch frequently used program by clicking that icon SDHC Secure Digital High Capacity card This is the extension of the SD card that supports over 2GB bytes Glossary Server In general a server refers to a computer that provides shared resources for network users Share This refers to setting a resource of a computer such as a folder or printer so that other users can also use it Shared Folder A folder that can be used by other users on the network Sleep Mode A power mode that enables computers to save power consumption when they are not being used When a computer is in Sleep Mode the data on the computer memory is not saved to the hard disk If the power is turned off the data in memory will be lost System File System Files refer to files that are read and used by the Windows operating system In
51. corresponding models only This technology automatically controls the CPU performance PANS to minimize heat generation when the CPU temperature exceeds a preset level Due to the automatic control of the CPU performance the experienced performance may be degraded If you don t want to use the Turbo Control technology enter the BIOS Setup select Advanced gt Turbo Control from the menu and set it to Disabled 3 After a moment the BIOS setup screen appears In this case the temperature of the surface of the product The items in the BIOS setup may differ depending on the may increase If you cannot find the menu item in the BIOS product Setup menu download the latest version of the BIOS from the download center and install it Chapter 3 BIOS Setup A O The BIOS Setup Screen System Setup Keys In the Setup you have to use the keyboard i The BIOS Setup menus and items may differ depending on your computer model F1 Press to view the Setup Help Sysinto Advanced Security Boot Exit E Setup Menu aa Time 0 21 53 Hel Up amp Down N Press to move up and down ysten Date 87 30 20XX N p Keys SITE re 2 EE pena Help for the CPU Vender XXKXXXXX selected F5 F6 Fa Ger Press to change the item value fb er item appears C N a automatically F9 Press to load the default Setup See ee ie Setup Items settings BIOS Version AARANAAN o HICON Version XXXXXXXX ESC ama Press to re
52. ctric shock or fire hazard Shut down the computer and disconnect all cables before disassembling the computer If there is a modem disconnect the phone line If your notebook is external amp removable battery type remove the external battery Failure to do so may cause electric shock Safety Precautions nel A Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality When carrying the notebook computer with other items such as the adapter mouse books etc take care not to press anything against the notebook computer If a heavy object is pressed against the Security and Movement Related notebook computer a white spot or stain may appear on the LCD Therefore take care not to apply any pressure to the notebook Follow the instructions for the relevant location e g airplane hospital etc when using a wireless communication device wireless LAN Bluetooth etc In this case place the notebook computer in a separate compartment away from the other objects Avoid exposing a drive to magnetic fields Security devices with magnetic fields in clude airport walk through devices and se curity wands The airport security devices that check car ry on luggage such as conveyor belts use x rays instead of magnetism and will not damage a drive Safety Precautions ED Caution Failure to follow instructions marked with this symbol may cause sl
53. d Sound gt Mouse gt Hardware tab and check the device E g Elan Synaptics etc e The Windows driver provides basic touchpad functions moving the pointer clicking etc but the gesture function is not supported Chapter 2 Using the computer Basic Touchpad Functions Moving the cursor on the screen Place your finger on the touchpad slightly and move your finger The mouse cursor will move accordingly Move your finger in the direction you wish to move the cursor Touchpad Click Function Place a finger on the touchpad and click on an item once Alternatively press the left button once quickly and release it Or Double Click Function Put your finger on the touchpad and quickly tap twice with your finger on an item you want Alternatively press the left touchpad button twice quickly Chapter 2 Using the computer This corresponds to clicking the right mouse button Right Button Function Press the right touchpad button once The corresponding pop up menu appears Drag Function Dragging refers to moving an item to another place after selecting it Press and hold down the left touchpad button over an item you want to drag and move the item to the new location Holding down the lef touchpad button Touchpad The Gesture Function of the Touchpad Optional Ze e The Touchpad Gesture function may not be provided and the version of the function m
54. d up DVD insert the DVD and follow the System Software Installation directions To delete Samsung Recovery Solution refer to the Help section of the program Samsung Recovery Solution Optional Recovery Solution Representation Optional What is a Recovery Area e Samsung computers have an additional partition to recover computers or save backup files Only for models with the Samsung Recovery Solution This partition is called a Recovery Area and it includes a recovery image that comprises of the OS and application programs You can either double click the Samsung Recovery Solution icon on the desktop or press while booting the computer to enter the Recovery Area Then you can back up the present computer state or recover the computer from backed up images For deleting the Recovery Area you need to use an additional Recovery Area Removal Tool After deleting the recovery area you can use the newly created partition for other uses such as for saving personal data Be careful that once the recovery area is deleted the Samsung Recovery Solutions will not work anymore Chapter 4 Backup Restore The capacity representation of the hard disk drive HDD in Windows is different from the product specifications e The capacity of the storage device HDD of the manufacturer is calculated assuming that 1KB 1 000 Bytes However the operating system Windows calculates the storage device capacity assuming that 1
55. dows to provide maximum shielding Equipment or its transmit antenna that is installed outdoors is subject to licensing Pour empecher que cet appareil cause du brouillage au service faisant l objet d une licence il doit etre utilize a l interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal Si le matriel ou son antenne d emission est installe a l exterieur il doit faire l objet d une licence If fitted with 2 4G band or 5G band Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4GHz 5GHz Band may be present embedded in your notebook system This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in Canada if an Industry Canada ID number is on the system label Regulatory Compliance Statements When using IEEE 802 11a wireless LAN this product is restricted to indoor use due to its operation in the 5 15 to 5 25 GHz frequency range Industry Canada requires this product to be used indoors for the frequency range of 5 15 GHz to 5 25 GHz to reduce the potential for harmful interference to co channel mobile satellite systems High power radar is allocated as the primary user of the 5 25 to 5 35 GHz and 5 65 to 5 85 GHz bands These radar stations can cause interference with and or damag
56. e Restores only major Windows files in a short time Complete Restore Restores drive C to the previous normal state Data Restore Restores important files or folders to the previously backed up state Samsung Recovery Solution Optional System Software Functions Samsung Recovery Solution provides system software so that you can reinstall or copy the device drivers and system software necessary for normal operations onto a separate storage device Restore Function Not only can you use Samsung Recovery Solution when Windows is running but also when you are unable to boot up into Windows Let s learn how to use Samsung Recovery Solution Optional functions such as Initial State Image Initial Status Backup and Partitioning are only available in some models If the image of the initial state is saved on a DVD or removable storage device connect the DVD drive or removable storage device to the computer before using the function Partition Setup amp Initial Status Backup If you turn your computer on for the first time the Initial Status Backup function is performed after registering Windows This function saves an image of the Initial Status of the C drive to a secure location so that users can restore the computer to the Initial Status using the Complete Restore function An Initial Status Backup is only performed once immediately after the computer is purchased Chapter 4 Backup Restore 1 If you turn th
57. e Disable and Deactivate Using the TPM Security Device Optional ne Q Installing the TPM program Registering the TPM program You can install the TPM program as follows Install the program according to the procedures below 1 When the TPM program installation is completed click Start gt All Programs gt Infineon Security Platform Solution gt Manage Security Platform gt User Settings with 4 This program is only provided for models with Samsung administrator authority TEM Recovery Solution and the TPM function Alternatively double click the icon on the Taskbar and run initialization with administrator authority Launch the Samsung Recovery Solution PO o 1 J y 2 The security authentication settings begin with the Initialization Wizard When the Initialization Wizard 2 Click the System Software icon appears click Next 3 Click the System Software Installation icon Welcome to the Security Platform Quick Initialization A Infineon Please select an initialization method Quick initialization recommended for most users Select TPM Host SW and click Install Now S password ata Which drive do you want to use E USBDrive T4 Removable media v If the system software media is supplied with the product you can install the program by using the system software media only when supplied Advanced initialization for expert users Allow ced configu oi ramen p oaaae and features ue
58. e cord Do not use this product in areas classified as hazardous Such areas include patient care areas of medical and dental facilities oxygen rich environments or industrial areas Battery Disposal Do not put rechargeable batteries or products powered by non removable rechargeable batteries in the garbage Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer Follow all local regulations when disposing of old batteries E THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Chapter 5 Appendix Laser Safety All systems equipped with CD or DVD drives comply with the appropriate safety standards including IEC 60825 1 The laser devices in these components are classified as Class 1 Laser Products under a US Department of Health and Human Services DHHS Radiation Performance Standard Should the unit ever need servicing contact an authorized service location Ea Laser Safety Note Use of controls or adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure To prevent exposure to laser beams do not try to open the enclosure of a CD or DVD drive e Class 1M laser radiation when operating part is open Do not view directly with optical instruments e Class 3B invisible laser radiation whe
59. e hole at the bottom of the computer to cut or there is a funny smell coming from the battery power the product or battery remove the the product or battery the computer and contact a service center In the case of flooding lightning or explosions cut the battery power do not reconnect the AC adapter There is a danger of an explosion or fire and immediately contact Samsung Electronics so that To use the computer safely replace a dead the appropriate countermeasures can be taken battery with a new authorized battery Safety Precautions noel A warning Usage Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality Disconnect all cables connected to the computer before cleaning it If your notebook is external amp removable battery type remove the external battery e Thereafter if you connect the AC adapter the battery power will be supplied again There is a danger of electric shock or damage En Do not cut the battery power under normal to the product conditions Do not connect a phone line connected to a digital phone to the modem e This may result in data loss or a product malfunction There is a danger of a electric shock fire or damage to the product EA The location of the Emergency Hole may differ depending on the model p Do not place any container filled with water or chemicals over or near the com
60. e power on for the first time the Register Windows screen appears If you register Windows according to the instructions on the screen the computer will be restarted 2 After the computer has been restarted the Partition Setup screen appears To resize the C and D drives adjust the partition size using the slide bar and the click Next The Partition Setup function is only available when the computer is turned on for the first time and will not be available afterwards Once you have completed the partitioning it cannot be resized Partition the disk carefully 3 The Initial Status Backup screen appears To continue the Initial Status Backup click Restart Now The computer will restart The Initial Status Backup is performed to backup the initial Status of the C drive to a secure location This backup image is used for the Complete Restore function that restores your computer to the initial status 5 When the Initial Status Backup is complete restart Windows Samsung Recovery Solution Optional Restoring the computer Restore is a function that enables restoring the computer to a saved point when the computer was purchased or a user saved point The Restore function provides the Basic Restore and Complete Restore options When Windows is running Click Samsung Recovery Solution When Windows does not start Turn the computer on and press the key when the boot screen SAMSUNG logo appears After
61. e selection select a display device HDMI LCD HDMI Clone LCD HDMI Dual View Ze e External Monitor TV is not supported in the DOS 5 Command Prompt window e Simultaneous output to all 3 LCD CRT HDMI is not supported e Ifthe screen is not switched even if you press the key combination you have to install the Easy Settings program Connecting an External Display Device Setting up HDMI TV video Optional If the Desktop screen displayed on the TV does not fit to the TV screen configure it as follows depending on the graphics card gt e You can view the graphics card type by selecting Device Manager gt Display adapters and then clicking the symbol s e The screen images and terms may differ from actual product depending on the computer model and driver version Chapter 2 Using the computer gt For Intel graphics cards 1 Right click over the Desktop and select Graphics Properties i If a window appears where you can select the mode select Basic Mode and click OK Click Display gt General Settings select Customize Aspect Ratio in the Scaling field fit the Desktop to the TV screen and click OK Intel Graphics and Media Control Panel Ee 1600 x 900 Display Y 32 Bit Digital Television General Settings bp Multiple Displays 60 Hz Color Enhancement Custom Resolutions Rotate To Normal Monitor TV Settings Customize Aspect Ratio 3D
62. e to this device The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E I R P limit for the 5 25 to 5 35 and 5 725 to 5 85 GHz frequency range in point to point operation The power output of the wireless device or devices which may be embedded in your notebook is well below the RF exposure limits as set by Industry Canada Operation of this device is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device To prevent radio interference to licensed service this device is intended to be operated indoors and away from windows to provide maximum shielding Equipment or its transmit antenna that is installed outdoors is subject to licensing i Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Contact manufacturer for service Chapter 5 Appendix Des dispositifs de basse puissance de type radio LAN p riph riques de communication sans fil par radiofr quence RF fonctionnant sur une bande de 2 4GHZ 5GHz sont peut tre integr s dans votre appareil Cette section est applicable uniquement si ces dispositifs sont pr sents Consultez l tiquette du syst me pour v rifiez la pr sence de dispositifs sans fil Si l a
63. ed by Samsung Electronics only Failure to do so may cause fire or damage the product Never disassemble or repair the product by yourself There is a danger of electric shock or fire To connect a device that is not manufactured or authorized by Samsung Electronics enquire at your service center before connecting the device There is a danger of damaging the product Safety Precautions E Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product Cautions on Preventing Data Loss Hard Disk Management Take care not to damage the data on a hard disk drive e A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk e Take extra care because moving the computer or an impact on the computer when it is turned on may damage the data of the hard disk drive e The company is not liable for any loss of data on the hard disk drive Chapter 1 Getting Started Causes that may damage the data of a hard disk drive and the hard disk drive itself e The data may be lost when an external impact is applied to the disk while disassembling or assembling the computer e The data may be lost when the computer is turned off or reset by a power failure while the hard disk drive is operating e The data may be lost and irrecoverable due to a computer virus infection e The data may be lost if the power
64. ember password for all applications This dialog will automatically be canceled in 22 seconds Using the TPM Security Device Optional ane You will be able to confirm that the color of the folder file name in the encrypted folder has been changed to green Libraries Documen ts gt Organize Open Share with Burn New folder Favorites Documents library BE Desktop Includes 2 locations my Downloads T E Recent Places Libraries Documents hi a Music Encrypted Data Security Platform test JQ d Documents gt test v Search test Oo oca Organize Share with fi Ft Favorites BR Desktop ib Downloads T i Recent Places Libraries Opening an encrypted folder file 1 Double click an encrypted folder file 2 If the user authentication window appears enter the basic user password you entered when registering the user and click OK 3 The folder file opens Chapter 2 Decrypting an encrypted folder file 1 Right click over an encrypted folder file and select Decrypt from the pop up window 2 If the user authentication window appears enter the basic user password you entered when registering the user and click OK 3 The folder file is decrypted Using the virtual drive Personal Secure Drive PSD The virtual drive PSD is a virtual space to save and manage confidential data In the created virtual drive PSD
65. en after turning the computer on again gt y The screen brightness is automatically set to the brightest To maintain the LCD brightness set by using the brightness level when AC power is connected and the brightness is control keys or through the Power Options follow the automatically set dimmer when the computer runs on battery procedures below power to extend the battery use time gt For Windows 7 1 Click Control Panel gt Hardware and Sound gt Power Controlling the Brightness Using the Keyboard opion 2 Click Change the settings of the currently configured mode i i F3 PRE O NESE RE AIN RE j is bu 3 Adjust the display brightness adjustment menu bar and click the Save the changes button the a key Saving battery power consumption The LCD brightness can change up to 8 levels and the brightness Decreases the LCD brightness when the computer is running on battery power to save battery power increases by 1 level when pressing the key once consumption LCD Brightness Control i LCD bad pixels principle of computer z Samsung observes the specifications regarding strict quality and reliability of LCD But in spite of that it is inevitable that there might be a small number of bad pixels A large number of bad pixels can cause problems in appearance but a small number of pixels doesn t affect the computer performance Therefore Samsung observes and manages the following dot principles Bright dot
66. en you have copied confidential data to the PSD the original data files are not encrypted When you have to register again to erase the authentication information on the TPM chip To register a user again you need to delete the existing authentication information saved on the TPM chip and then clear the TPM chip Register the user in the following order 1 Delete the virtual drive 2 Delete the existing authentication information saved on the TPM chip Chapter 2 Using the TPM Security Device Optional ane 6 Deleting the virtual drive If a virtual drive has been created you have to delete the virtual drive before deleting the existing authentication information saved on the TPM chip Right click over M gt 4 and click Personal Secure Drive gt Create Manage Click Next Enter the password that you entered when registering the TPM program and click Next Select Delete selected PSD and click Next Select I want to permanently delete my Personal Secure Drive without saving an unencrypted copy of its contents and click Next VU A WW N Click Next and then Finish ON 7 Now the virtual drive has been deleted Deleting the existing authentication information saved on the TPM chip 1 Click the Start gt Control Panel gt Programs gt Uninstall Program gt Infineon TPM Professional Package and click Uninstall 2 If the message window appears click Yes to remove the program 3
67. ep onto the power cord or AC adapter to avoid damaging the power cord or AC adapter If the cord is damaged there is a danger of electric shock or fire Safety Precautions A Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality Battery Usage Related Please charge the battery fully before using the computer for the first time Keep the battery out of the reach of infants and pets as they could put the battery into their mouths There is a danger of electric shock or choking Use an authorized battery and AC adapter only Please use an authorized battery and adapter approved by Samsung Electronics Unauthorized batteries and adapters may not meet the proper safety requirements and may cause problems or malfunctions and result in an explosion or fire Chapter 1 Getting Started Do not use the computer in a badly ventilated location such as on bedding ona pillow or cushion etc and do not use itin a location such as room with floor heating as it may cause the computer to overheat Take care that the computer vents on the side or the bottom are not blocked especially in these environments If the vents are blocked the computer may overheat and it may cause a computer problem or even an explosion Do not use the computer in a humid location such as a bathroom or sauna Please use the computer within the recommended tem
68. er d moved and the data will be restored at the time selected below You may need to reinstall some software after the Restore gt Select a Restore time and click the Next button Caution Make sure to connect the power while the Restore is in progress If the power is turned off during a Restore you have to restart the Restore from the beginning TARY The restoration progress message appears after the computer boots up in restoration mode If you click OK the restoration begins Ze If multiple DVDs have been used for a Complete Backup whenever burning a DVD is completed the Insert the next DVD message will appear When the Restart the System message appears after the restoration is complete click OK to restart the system The Complete Restore has been completed Samsung Recovery Solution Optional Data Backup Restore The Data Backup function enables you to backup specific files and folders to another drive DVD or removable storage device Data Restore enables you to restore data using the data saved by a Data Backup when data is lost This guide describes the Backup and Restore procedures on the basis of backing up and restoring by using DVD Data Backup 1 When the Samsung Recovery Solution start screen appears click Backup and then click Data Backup 2 In the data selection screen select either Basic Selection or Select from all select a folder or file to be backed
69. es a portion of memory or claims it for further use E g For 1GB 1 024MB memory installed Windows may report the capacity as 1 022MB or less For more information refer to the Samsung Recovery Solution section Safety Precautions For your security and to prevent damage please read the following safety instructions carefully gt Since this is commonly applied to Samsung Computers some pictures may differ from actual products A Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality Installation Related Do not install the product in places exposed to humidity such as a bathrooms There is a danger of electric shock Use the product within the operating conditions specified in the Manufacturers User Guide Keep the plastic bags out of the reach of children There is a danger of suffocation Chapter 1 Getting Started G Keep a distance of 15cm or more between the computer and the wall and do not place any objects between them This may increase the internal temperature of the computer and may cause an injury Do not install the computer on a slant or a place prone to vibrations or avoid using the computer in that location for a long time This increases the risk that a malfunction or damage to the product will occur Avoid exposing any part of your body to the heat from the computer vent or AC adapter for a long t
70. estored in the backup list and click the Next button Select a folder for the restoration and click the Next button Data Restore begins When Data Restore is completed check if the data has been restored to the specified folder Chapter 4 Backup Restore Samsung Recovery Solution Optional System Software Function The System Software function is a function that enables you to reinstall device drivers and System Software Programs or back up those programs The system software function is supported by Samsung Recovery Solution version 4 or later Therefore the function may not be supported depending on the version The System Software Installation Function only works in Microsoft Windows Chapter 4 Backup Restore Installing System Software 1 When the initial menu screen appears click System Software gt System Software Installation Samsung Recovery Solution r PA Samsung x 7 Recovery Solution System Software The System Software Installation installs required device drivers and applications n software nce The System Software Backup backs up system software such as device drivers and applications gt Select a function System Software Installation System Software Backup ables reinstalling device drivers and application supplied by Samsung Electronics Beck Move to the Easy Software Manager Using the Easy Software Manager you can install de
71. et up a new connection or network Set up a wireless broadband dial up ad hoc or VPI Wired Network 3 Select Local Area Connection and click the right button of the touch pad and select Properties i 1 EN JQ 7 E Network and Internet Network Connections X File Edit View Tools Advanced Help isable this network device Ed Diagnose this connec Name Status Device Name Connectivity Network Category Owi LAN or High Speed Internet 1 Local Area Connection Network cable unplugged K AT Intel R PRO 100 Disable Status Diagnose Bridge Connections Create Shortcut Delete Rename gt The LAN Device name may differ depending on your computer s Network Device Chapter 2 Using the computer Select Internet Protocol Version 4 TCP IPv4 from the list of Network Components and click Properties a Local Area Connection Properties x Connect using EP COCO This connection uses the following items 1H Client for Microsoft Networks JB Qo5 Packet Scheduler J File and Printer Sharing for Microsoft Networks Intemet Protocol Version 6 TCP 1Pv6 S Intemet Protocol Version 4 TCP IPy4 wi Link Layer Topology Discovery Mapper 1 0 Driver wi ink Layer Topology Discovery Responder pao Control Protocol Intemet Protocol The default wide area network protocol that provides communication across diverse interconnected networks Ze e The Network Component name
72. g on the condition and type of the media e To eject a CD when the CD drive does not work or the computer is off place the end of a paper clip gt into the Emergency Hole until the CD tray is ejected hapter 2 Multi Card Slot Optional Using ee Q Using the multi card slot you can read and write data to cards Using the card You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera digital 1 Insert the card into the multi card slot in the indicated camcorder MP3 etc direction gt For 13 3 inch models Ze e Supported Cards SD Card SDHC Card SDXC Card e You have to additionally purchase a multi card with the necessary capacity depending on your requirements e You can use a multi card just like any data storage device A copyright protection function is not supported e Since you can lose a card when moving the computer keep the card separately The figures used for the description are of a representative model Therefore the figures may differ from the real ones gt For 14 inch models e Ifa slot protection dummy card is inserted into your computer remove the dummy card before using the computer e These descriptions are written based on Windows 7 the latest operating system Therefore some descriptions and figures may differ from your operating system But as the usage is similar to other Windows operating systems you can
73. gulations require wireless devices to be turned off while traveling in an airplane 802 11ABGN also known as wireless Ethernet or Wifi and Bluetooth communication devices are examples of devices that provide wireless communication In environments where the risk of interference to other devices or services is harmful or perceived as harmful the option to use a wireless device may be restricted or eliminated Airports Hospitals and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated When in environments where you are uncertain of the sanction to use wireless devices ask the applicable authority for authorization prior to use or turning on the wireless device Every country has different restrictions on the use of wireless devices Since your system is equipped with a wireless device when traveling between countries with your system check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country If your system came equipped with an internal embedded wireless device do not operate the wireless device unless all covers and shields are in place and the system is fully assembled Regulatory Compliance Statements i e Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Plea
74. has TA determined that this product meets the ENERGY STAR IE guidelines for energy efficiency Samsung is a registered trademark of Samsung Co Ltd Intel Pentium Dual Core Quad Core are registered trademarks of the Intel Corporation AMD Dual Core Quad Core are registered trademarks of the AMD Corporation Microsoft MS DOS and Windows are registered trademarks of the Microsoft Corporation All other product or company names mentioned herein are registered trademarks of their respective companies Glossary Chapter 5 Appendix The Glossary lists the terminologies used in this User Guide For terminologies other than these look in Windows Help Backup A way to save the current data to restore it later if necessary A backup is a way to restore computer data when the data or computer is damaged Chargeable USB This program enables supplying power to a specific USB port when the system is in power saving mode hibernation mode or off Client This refers to a computer that uses a shared network resource provided by a server DDR SDRAM Double Data Rate Synchronous Dynamic Random Access Memory DRAM is a memory type whose cells consist of a capacitor and transistor manufactured at a low price SDRAM is a memory type whose performance has been improved by synchronizing the clock with the external CPU clock DDR SDRAM is a memory type whose performance has been improved by doubling the operating speed of
75. he actual appearance of the product e This guide decribes procedures for using both the mouse and the touchpad e This manual has been written for the Windows operating system The descriptions and figures may differ depending on the installed operating system e The User guide supplied with this computer may vary depending on your model Before You Start Safety Precaution Notations Icon Notation A Description Failure to follow instructions marked with this symbol may cause personal injury and or fatality Warning Failure to follow instructions marked with this symbol may cause slight injury to yourself or damage your property i Caution Text Notations Icon Notation ER Caution Note Description Content included in this section includes information required about the function Content included in this section includes helpful information to use the function Chapter 1 Getting Started Copyright 2012 Samsung Electronics Co Ltd Samsung Electronics Co Ltd owns the copyright of this manual No part of this manual may be reproduced or transmitted in any form or by any means electronic or mechanical without the consent of Samsung Electronics Co Ltd The information in this document is subject to change without notice due to improving the performance of the product Samsung Electronics shall not be liable for any data loss Please take care to avoid lo
76. he screen is not switched even if you press the air F4 setting screen appears where you can select the monitor t key combination you have to install the Easy mode Settings program Since pressing the key while holding down the key Alternatively to set up dual view Open the Display Settings window in the Control Panel select Monitor 2 and select the Expand to fit to this monitor checkbox to set dual view For more detailed information refer to the Windows online help changes the selection select a display device LCD CRT LCD CRT Clone LCD CRT Dual View Connecting an External Display Device Connecting through the HDMI port Optional By connecting the computer to a TV with a HDMI port you can enjoy both a high visual quality and a high sound quality After connecting a TV through HDMI you have to configure the screen and sound 1 Connect the HDMI cable to the HDMI port of the TV External TV Monitor Projector Ze e This is only supported for models that support a TV output ain port HDMI e When a TV provides more than one HDMI port connect the computer to the DVIIN port e When connecting the computer to a TV switch the external input mode of the TV to HDMI Chapter 2 Using the computer Press the key combination once Then the setting screen appears where you can select the monitor mode Since pressing the key while holding down the key changes th
77. he wall outlets before cleaning the system Unplug the system from the wall outlet and refer servicing to qualified personnel if The power cord or plug is damaged Liquid has been spilled into the system The system does not operate properly when the operating instructions are followed The system was dropped or the casing is damaged The system performance changes Chapter 5 Appendix The Instruction On Safety Operation of NotePC 1 When installing and operating devices please refer to safety requirements in the user guide Devices can be used only with the equipment specified in the technical specifications of the devices If any smell of burning or smoke is detected from the computer the unit should be switched off and battery removed The unit should be checked by a qualified technician before reuse Service and repair of devices should be carried out by authorized service centers Do not allow your portable computer to operate with the base resting directly on exposed skin for extended periods of time The surface temperature of the base will rise during normal operation particularly when AC Power is present Allowing sustained contact with exposed skin can cause discomfort or eventually a burn Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer To reduce the risk of fire use only No 26 AWG or larger telecommunications lin
78. hout your intervention Please check the equalizer default setting before first usage Overview 4 e The pictures used for the cover and the main body in the sin User Manual are those of the representative model of each series Therefore the colors and appearance of the pictures may differ from the actual appearance of the product depending on the model e The actual color and appearance of the computer may differ from the pictures used in this guide e This may not be supported for some devices Chapter 1 Getting Started Using this camera you can take still pictures and record video 1 Camera Optional Camera operating This indicates the camera operating indicator Optional status 3 LCD The screen images are displayed here Speaker 14 inch A device used to generate sound models optional 5 Power Button I Turns the computer on and off A device to enter data by pressing the 6 Keyboard keys The touchpad and touchpad buttons provide functions similar to the mouse ball and buttons Touchpad Touchpad Buttons Shows the operating status of the computer 8 Status Indicators The corresponding operating LED is lit when the corresponding function operates 9 Microphone You can use the built in microphone 4 Using the camera web cam Optional Using the Cyberlink YouCam program optional you can take pictures or record video by using the computer s built in camera by
79. ies the Class 2 identifier The following information is only applicable to systems labeled with the CE mark Chapter 5 Appendix This Information Technology Equipment has been tested and found to comply with the following European directives European Directives C e EMC Directive 2004 108 EC e Low Voltage Directive 2006 95 EC e R amp TTE Directive 1999 5 EC Manufacturer Information Samsung Electronics Co Ltd 416 Maetan 3Dong Yeongtong Gu Suwon City Gyeonggi Do 443 742 Korea Samsung Electronics Suzhou Computer Co Ltd No 198 Fangzhou Road Suzhou Industrial Park Jiangsu Province 215021 China Tel 86 512 6253 8988 For the web or the phone number of Samsung Service Centre see the Warranty or contact the retailer where you purchased your product Regulatory Compliance Statements European Radio Approval Information for products fitted with EU approved radio devices This Product is a Notebook computer low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4GHz 5GHz band may be present embedded in your notebook system which is intended for home or office use This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices CEO Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark
80. ight injury or damage to the product Installation Related Do not block the ports holes vents etc of the product and do not insert objects Damage to a component within the computer may cause electric shock or fire When using the computer with it lying on its side place it so that the vents face upwards Failure to do so may cause the internal temperature of the computer to rise and the computer to malfunction or halt Do not place a heavy object over the product This may cause a problem with the computer In addition the object may fall and cause injury or damage the computer Chapter 1 Getting Started Battery Usage Related Dispose of worn out batteries properly e There is a danger of fire or explosion e The battery disposal method may differ depending on your country and region Dispose of the used battery in an appropriate way Do not throw or disassemble the battery and do not put it into water This may cause an injury fire or explosion Use only a battery authorized by Samsung Electronics Failure to do so may cause an explosion Avoid contact with metal objects such as car keys or clips when keeping or carrying a battery Contact with a metal may cause excessive current and a high temperature and may damage the battery or cause a fire Charge the battery according to the instructions in the manual Failure to do so may cause an explosion or fire from damage to the product
81. ime when the computer is on Exposing a part of your body close to the heat from the vent or AC adapter for long periods of time may cause a burn Avoid blocking the vent at the bottom or side of the computer when using it on a bed or cushion If the vent is blocked there is a danger of damaging the computer or overheating the inside of the computer Ver 3 1 Safety Precautions A Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality Power Related gt The power plug and wall outlet figures may differ _ depending on the country specifications and the product Do not touch the main plug or power cord with wet hands There is a danger of electric shock Do not exceed the standard capacity voltage current of a multiplug or power outlet extension when using it for the product There is a danger of electric shock or fire hazard Chapter 1 Getting Started If the power cord or power outlet makes a noise disconnect the power cord from the wall outlet and contact a service center There is a danger of electric shock or fire hazard Do not use a damaged or loose main plug or power cord or power outlet There is a danger of electric shock or fire hazard Plug the power cord firmly into the power outlet and AC adapter Failure to do so may cause fire hazard Do not unplug the power cord by pulling the cable only If the c
82. ing on the model Upgrading Memory Settings and Upgrade 3 Chapter 3 Insert anew memory module into the memory slot at an angle of approximately 30 degrees aligning it to the angle of the memory slot Remove the screw on the memory compartment cover at the bottom of the computer using a screw driver gt For 13 3 inch models gt For 13 3 inch models Memory Slot gt For 14 inch models gt For 14 inch models Fixing Screw Memory Slot Upgrading Memory 5 Push the memory module down so that it is completely fixed If the memory does not fit easily push the memory module down while pulling the memory module latches outward gt For 13 3 inch models Memory module latches gt For 14 inch models Memory module latches 6 Close the memory compartment cover and fasten the screw Chapter 3 Settings and Upgrade 7 Connect the AC adapter and press the power button to turn the computer on 52 If you do not connect the AC adapter the computer will not be turned on even if you press the power button Removing a memory module Pull the memory module latches outward The memory module will pop up Remove the memory module out at an angle of 30 degrees For some models a special film is attached onto the memory module to enhance the wireless LAN performance When you replace the memory module make sure that
83. ing the TPM program Ze For more information about using the TPM program refer to the online help for the program Encrypting a file folder This function enables encrypting files and folders You can safely protect documents through the Encrypt File System EFS The Encrypt File System EFS function is supported by the following operating systems e Windows XP Professional e Windows Vista Business Enterprise Ultimate e Windows 7 Professional Enterprise Ultimate Right click over the folder or file to be encrypted and select Encrypt from the pop up menu Share with Restore previous versions Personal Secure Drive Send to Ma ie Chapter 2 Using the computer 2 If the Confirm Attribute Changes window appears select the range to apply the encryption to and click OK This dialog box only appears when the folder is encrypted You have chosen to make the following attribute changes encrypt Do you want to apply this change to this folder only or do you want to apply it to all subfolders and files as well Ifthe current operating system is Windows 7 or Vista the user account control window appears In this case click Continue 3 In the user authentication window enter the Basic user password you entered when registering the user and click OK infineon Infineon Tamos AG PC CCC SS eee An application needs access to a protected key Basic User Password E Rem
84. ion is only supported for models with TPM security chip 2 Installing the TPM program e For more information refer to the online help for the Installs the TPM program program Registering the TPM program e The program version described in this manual is subject to 3 Reaisters the TPM egisters the program change and the screenshots and terms used in this manual may differ from the actual product If you complete the steps above you can use the TPM function Using the TPM Security Device Optional nn sui Initializing the TPM chip 2 If the BIOS screen appears select the Security gt TPM Configuration item and press Enter When you use the TPM function for the first time or you want to register the user again you have to initialize the TPM chip Sysinfo Advanced Security Supervisor Password Clear User Password Clear ee e HDD P d CI EL Initializing the TPM chip erases all authentication is co information saved on the TPM chip Any decision to Bada ple eels Enter ea Set User Password Enter initialize must be taken carefully Set HDD Password Enter e To initialize the TPM chip again while the TPM function is Password on Boot Enabled in use you have to decrypt any existing files and folders gt TPM Configuration encrypted by the TPM function first Otherwise you will not be able to access the files and folders after re SR ANU CISION 3 Set the TPM Support item to Enabled and set the Change
85. ireless devices because their signals could interfere with critical aircraft instruments Other Wireless Devices Safety Notices for Other Devices in the Wireless Network Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network i The Part 15 radio device operates on a non interference basis with other devices operating at this frequency Any changes or modification to said product not expressly approved by Intel could void the user s authority to operate this device Chapter 5 Appendix This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Unintentional Emitter per FCC Part 15 E This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy If not installed and used in accordance with the instructions it may cause harmful interference If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to
86. ited States of America if an FCC ID number is on the system label Chapter 5 Appendix Q This device is restricted to indoor use due to its operation in the 5 15 to 5 25 GHz frequency range FCC requires this product to be used indoors for the frequency range 5 15 to 5 25 GHz to reduce the potential for harmful interference to co channel Mobile Satellite systems High power radars are allocated as primary users of the 5 25 to 5 35 GHz and 5 65 to 5 85 GHz bands These radar Stations can cause interference with and or damage this device Operation of this device is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device E Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Contact manufacturer for service Regulatory Compliance Statements Health and safety information Exposure to Radio Frequency RF Signals Certification Information SAR This product can be embedded a radio transmitter and receiver It is designed and manufactured not to exceed the exposure limits for radio frequency RF energy set by the Federal Communications Commission FCC of the U S government These FCC exposure limits are derived from the recommendations of two expert organizati
87. ix and Active Matrix LCD types This computer uses the Active Matrix type LCD called a TFT LCD Since an LCD is implemented by transistors instead of a cathode ray tube unlike a CRT its size can be slim And because it does not blink it reduces eye strain Glossary Network A group of computers and devices such as printers and scanners connected by a communications link A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links The biggest network is the Internet a worldwide network Network Administrator A user who plans configures and manages network operations Sometimes a network administrator is called a system administrator Notification Area This refers to the right area of the Taskbar including program icons such as the volume control the power options and the time Partition This refers to the act or practice of dividing the storage space of a hard disk drive into separate data areas known as partitions If a 100GB hard disk drive is partitioned into 2 x 50GB partitions the hard disk drive can be used as if there are 2 hard disk drives Chapter 5 Appendix PCMCIA Personal Computer Memory Card International Association card This is an extended card slot specification for mobile computers such as a notebook computer Not only amemory device but also most peripherals such as hard disk drives LAN cards etc can be
88. lick Backup in the start screen of the Samsung Recovery il gt The Livelmaging and System Software Backup functions are supported as options for the Complete Backup operation 2 Enter a description of the current status of the computer and Livelmaging Performs the Complete Backup operation click Next while Windows is running The backup operation using Livelmaging may slow down if the hard disk drive is After connecting a DVD drive or removable storage device accessed frequently by other applications you can specify the DVD drive or removable storage device e System Software Backup This function backs up the as the Save Path system software on to the DVD after the completion of the Complete Backup operation Samsung Recovery Solution Optional When the system restarts in Restoration Mode the Complete Backup operation begins Continue with the backup by following the instructions 4 e Samsung Recovery Solution supports the DVD R DVD R ii DVD RW and DVD RW formats e Ifthe Livelmaging option has been selected the Complete Backup operation begins without the computer being restarted 5 Continue with the Complete Backup operation by following the instructions jae Samsung Recovery Solution PA Samsung x 7 Recovery Solution Complete Backup Complete Backup in progress gt The required time is determined by the amount of data to be backed up Please wait until the backup is completed Complete Back
89. may differ depending on i the Operating System Installed e To add a network component click Install in the screen shown in the figure above You can add clients services and protocols Wired Network pan ie Q Using the computer 5 OMR ICONS Using the WOL Wake On LAN function When using DHCP select Obtain an IP address automatically To use a static IP address select Use the lt Wake On LAN is a function that activates the system from Sleep following IP address and set the IP address manually mode when a signal such as a ping or magic packet command arrives over the network wired LAN Internet Protocol Version 4 TCP IPv4 Properties o S SSE SE ee 1 Click Start gt Control Panel gt Network and Internet gt You can get IP settings assigned aulamatically if your network supports Network and Sharing Center and click on Change adapter this capability Otherwise you need to ask your network administrator for the appropriate IP settings settings in the left menu pane A Obtain an IP address automatically Use the following IP address IP address Er 2 Right click on the Local Area Connection and select Subnet mask Des Properties Default gateway Obtain DNS server address automatically Use the following DNS server addresses Preferred DNS server Alternate DNS server E Validate settings upon exit Ze When not using DHCP ask your network administrat
90. may differ depending on your computer model For detailed specifications refer to the catalogue E e Do not insert a cracked or scratched CD Otherwise the CD may break and damage the optical disk drive when the CD rotates at a high speed e When you clean a CD or DVD title wipe with a soft cloth from inside to outside e Insert a Mini CD into the center of the CD drive The figures used for the description are of a representative model Therefore the figures may differ from the real ones e Using a CD that is not in the shape of a circle is not recommended Using CD Drive For 14 inch models Press the Eject button of the optical disk drive at the side of the computer Hole Eject Button Chapter 2 Using the computer When the CD tray opens insert a CD or DVD and push the tray in until it clicks Push the CD tray inward until it clicks The CD drive status indicator is turned on Chapter 2 CD Drive ODD Optional Using the computer Using External type CD Drive For 13 3 inch models to be purchased 1 Press the Eject button of the CD drive Connect the CD drive to the USB port Status Indicator Emergency Hole Eject Button 2 When the CD tray opens insert a CD or DVD and push the tray in until it clicks 3 Push the CD tray inward until it clicks The CD drive status indicator is turned on gt e ACD drive s reading and writing speed may differ dependin
91. n but you cannot change the major settings of the BIOS Setup because you If you set a password for a hard disk drive it cannot be accessed cannot enter the BIOS Setup from another computer This helps prevent unauthorized access to the major settings in Press lt Enter gt in the Set HDD Password item and define a the BIOS Setup menu password as described in Step 3 of the Setting up the Supervisor Before configuring a user password a supervisor password must Password have been configured Deactivating the supervisor password also deactivates the user password ER The hard disk drive password setting function is not In the Set User Password item press lt Enter gt and complete the provided for some models procedures from Step 3 of Setting a Supervisor Password Changing the hard disk drive password For security purposes you can only change a hard disk drive password after restarting the computer by pressing the computer Power button Setting Up a Boot Password If you cannot change the hard disk drive password or the To setup a boot password the administrator password Set AL EAD ECS I UES esae EEE winen antenie Supervisor Password should be set in advance tne BIO Setup ane tien Sclecthig See Le Password press the Power button to turn the computer Set the Password on boot item to Enabled on again Once a boot password is set you have to enter a password to boot up the computer Be sure to remember the password for later u
92. n open Avoid exposure to the beam Replacement Parts and Accessories Connect and Disconnect the AC adapter The socket outlet shall be installed near the equipment and shall be easily accessible Do not unplug the power cord by pulling the cable only Power Cord Requirements The power cord set wall plug cable and AC adapter plug you received with your computer meets the requirements for use in the country where you purchased your equipment Power cord sets for use in other countries must meet the requirements of the country where you use the computer For more information on power cord set requirements contact your authorized dealer reseller or service provider Chapter 5 Appendix The requirements listed below are applicable to all countries General Requirements e All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used e The power cord set must have a minimum current capacity of 7 Aand anominal voltage rating of 125 or 250 volts AC as required by each country s power system USA ONLY e The appliance coupler must meet the mechanical configuration of an EN 60 320 IEC 320 Standard Sheet C7 or C5 connector for mating with appliance inlet on the computer Regulatory Compliance Statements Wireless Guidance If fitted with 2 4G band or 5G band Low power Radio LAN type devices radio freq
93. nguished by the figure SS or SS lt printed on the port of the product The USB 3 0 feature is optimized for Windows 7 For Windows XP the USB 3 0 feature may be restricted You can connect an HDMI cable to this port Using this port you can enjoy digital video and audio on the TV This is the jack for connecting an ear set or headset A port used to connect a monitor TV or projector supporting a 15pin D SUB interface p You can connect a VGA adapter optional Overview gt For 14inch models gt What is a chargeable USB port USB device accessing and charging functions are supported The USB charging function is supported regardless of whether the power is turned on or off Charging a device through a chargeable USB port may take longer than general charging Using the Chargeable USB function when the computer is running on battery power reduces the battery usage time The user cannot evaluate the charging status of the USB device from the computer This may not be supported for some USB devices You can turn the Chargeable USB function ON OFF by selecting the Easy Settings gt General gt USB Charging option Optional DC Jack oe Wired LAN Port a USB 3 0 Port ss lt or Chargeable USB 3 0 Port ss Optional Monitor Port Digital Video Audio Port HDMI Homi Optional Ear set headset Jack A Chapter 1 Getting Started A jack to connect the
94. nsemble Cette pr caution peut tre particuli rement importante dans les zones rurales tT Afin d viter une lectrocution ou le disfonctionnement de l quipement n essayez pas de faire vous m me les raccordements lectriques la terre Contactez l autorit inspectrice ad quate ou un lectricien selon il conviendra Le Num ro d quivalence d appel REN attribu chaque dispositif terminal fourni une indication du nombre maximum de terminales qui peuvent tre connect es une interface t l phonique Le bout d une interface peut contenir n importe quelle combinaison de dispositifs sujets uniquement la condition que le total des num ros d quivalence d appel de tous les dispositifs ne d passe pas 5 Regulatory Compliance Statements Este produto esta homologado pela ANATEL de acordo com os procedimentos regulamentados pela Resolucao 242 2000 e atende aos requisitos tecnicos aplicados Este equipamento opera em car ter secund rio isto n o tem direito a prote o contra interfer ncia prejudicial mesmo de esta es do mesmo tipo e n o pode causar interfer ncia a sistemas operando em car ter prim rio European Union CE Marking and Compliance Notices Products intended for sale within the European Union are marked with the Conformit Europ ene CE Marking which indicates compliance with the applicable Directives and European standards and amendments identifed below This equipment also carr
95. o not press the keyboard touchpad or mouse with excessive e Keep the monitor and LCD screen clean force If you wear glasses clean them before using the computer Itis recommended connecting an external keyboard and e When entering contents printed on a paper into the computer mouse when using the computer for long periods of time use a Static paper holder so that the height of the paper is almost equal to that of the monitor Chapter 1 Proper Posture During Computer Use Getting Started Volume Control Headphones and Speakers Use Time Break Time Check your volume first to listen to music e Take a break for 10 minutes or more after a 50 minute period when working for more than one hour Illumination Do not use the computer in dark locations The illumination level for computer use must be as bright so for reading a book 18 VOLUME ee Check your e Indirect illumination is recommended Use a curtain to prevent volume reflection on the LCD screen e Check if the volume is too loud before using headphones Operation Condition Itis not recommended using headphones for long periods of Do not use the computer in hot and humid locations time e Use the computer within the allowed temperature and Any deviation from the equalizer default setting could cause humidity range specified in the User Guide hearing impairment e The default setting can be changed through software and driver updates wit
96. om digital apparatus as set out in the radio interference regulations of Industry Canada Le pr sent appareil num rique n met pas de bruits radio lectriques d passant les limitesapplicables aux appareils num riques de Classe B prescrites dans le r glement sur le brouillage radio lectrique dict par Industrie Canada Intentional Emitter per RSS 210 This device complies with RSS 210 of Industry Canada Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of this device L utilisation de ce dispositif est autoris e seulement aux conditions suivantes 1 il ne doit pas produire de brouillage et 2 utilisateur du dispositif doit tre pr t accepter tout brouillage radio lectrique re u m me si ce brouillage est susceptible de compromettre le fonctionnement du dispositif Chapter 5 Appendix The term IC before the equipment certification number only signifies that the Industry Canada technical specifications were met To reduce potential radio interference to other users the antenna type and its gain should be so chosen that the equivalent isotropically radiated power EIRP is not more than that required for successful communication To prevent radio interference to the licensed service this device is intended to be operated indoors and away from win
97. ons the National Council on Radiation Protection and Measurement NCRP and the Institute of Electrical and Electronics Engineers IEEE In both cases the recommendations were developed by scientific and engineering experts drawn from industry government and academia after extensive reviews of the scientific literature related to the biological effects of RF energy The exposure limit set by the FCC for wireless devices employs a unit of measurement known as the Specific Absorption Rate SAR The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram W kg The FCC requires wireless devices to comply with a safety limit of 1 6 watts per kilogram 1 6 W kg The FCC exposure limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements SAR tests are conducted using standard operating positions accepted by the FCC with the wireless transmitting at its highest certified power level in all tested frequency bands Although the SAR is determined at the highest certified power level the actual Chapter 5 Appendix Q SAR level of the device while operating can be well below the maximum value This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network In general the closer you are to a wireless base station antenna the lower the
98. or for the IP address When you have completed the settings click the OK button The network settings have been completed Wired Network Click Configure gt Power Management tab Select Allow this device to bring the computer out of standby then click OK Restart the system If the system wakes up from Sleep mode even though there is no received signal use the system after disabling the lt Wake On LAN gt function The LAN LED may not be turned off if System is shoutdown without disabling the WOL Wake on LAN option Connecting a wired LAN while using a wireless LAN may not activate the lt Wake On LAN gt function Set the Wireless LAN to Disable to use the lt Wake On LAN gt function lt Wake On LAN gt feature may not work while using Hybrid power saving feature gt For Win7 Wake On LAN is not supported by Ping A Cai Chapter 2 Using the computer When connected to a 100Mbps 1Gbps wired LAN and the computer exits Sleep hibernation mode a message appears informing you of a connection to a 10Mbps 100Mbps wired LAN This happens because when the computer exits standby hibernate mode restoring the network takes about 3 seconds When the network is restored it operates at 100Mbps 1Gbps y When system is running on battery some time it takes about 20sec after inserting LAN cable to be able to connect to internet This symptom happen as a result of power saving feature to reduce batter
99. ord is damaged it may cause electric shock Do not bend the power cord excessively or do not place a heavy object over the power cord It is especially important to keep the power cord out of reach of infants and pets If the cord is damaged it may cause electric shock or fire Safety Precautions Pri MARINS AC Adapter Usage Precautions Failure to follow instructions marked with this symbol may cause personal injury and even fatality Connect the power cord to an outlet or multiple power plug extended cable with a ground terminal Failure to do so may result in electric shock When the power supply is ungrounded the current may leak resulting in electric shock If water or another substance enters the power input jack AC adapter or the computer disconnect the power cord and contact the service center If the notebook computer has an external type removable battery separate the battery also Damage to the device within the computer may cause electric shock or fire hazard Keep the power cord or outlet clean so that they are not covered with dust Failure to do so may result in fire Connect the power cord to the AC adapter firmly Otherwise there is a danger of fire due to an incomplete contact Use only the AC adapter supplied with the product Using another adapter may cause the screen to flicker Do not place heavy objects or st
100. perature and humidity range 10 35 C 20 80 RH Do not close the LCD panel and put the computer into your bag to move it when it is still turned on If you put the computer into your bag without turning it off the computer may overheat and there is a danger of fire Shut the computer down properly before moving it Chapter 1 Safety Precautions Getting Started A AFIN Cutting the power to the internal battery Failure to follow instructions marked with this symbol may for corresponding models only cause personal injury and even fatality Never heat the product or battery or put the product or battery into a fire Do not put or use the product or battery in a hot location such as a sauna inside a vehicle exposed to the heat and so on There is a danger of an explosion or fire Take care not to allow metal objects such as e For products with built in batteries customers cannot remove a key or clip to touch the battery terminal the battery metal parts parts e In the case of flooding lightning or explosions you can cut the battery power by inserting an object such as a paper clip into the Emergency Hole at the bottom of the computer If a metal object touches the battery terminals it may cause excessive current flow and it may damage the battery or result in a fire e Disconnect the AC adapter and insert an object such as a If liquid leaks out of the product or battery paper clip into th
101. port RGB port Therefore when multiple ports are supported connect a display device to a port that provides the better visual quality Analog Monitor RGB Cable HDMI Cable e Before you start check the port and cable of the external display device and then connect the display device to the computer e Due to restrictions of the operating system the DualView function is not supported for Windows 7 Starter Connecting an External Display Device Chapter 2 Using the computer Connecting to the monitor port Optional gt For 14 inch models Connect the RGB port of the computer and the port of the monitor or TV with the monitor cable 15 pin You can experience a wider screen by connecting the computer to a monitor TV or projector with a monitor port You can give better presentations by connecting the computer to B External a projector i Monitor gt The VGA adapter is optional and to be be purchased Ft T 1 gt For 13 3 inch models ET Connect the VGA adapter to the monitor port of the computer Connect the VGA cable 15 pin to the connected VGA adapter and then connect the other end of the VGA cable to the VGA port of the monitor or the TV 2 Connect the power cord of the connected monitor TV or projector and turn the power on External Monitor Chapter 2 Connecting an External Display Device Using the computer 3 Press the 4 key combination once Then the 4 If t
102. ppareil est quip d une bande 2 4 G ou 5 G Les dispositifs sans fil qui peuvent tre int gr s dans votre syst me sont uniquement aptes pour une utilisation au Canada si l tiquette du syst me pr sente un nombre d identification d Industrie Canada En cas d utilisation d un LAN sans fil IEEE 802 11a ce produit ne peut tre utilis qu l int rieur en raison de son fonctionnement dans une plage des fr quences allant de 5 15 a 5 25 GHz Industrie Canada exige l utilisation de ce produit l int rieur pour une plage des fr quences allant de 5 15 a 5 25 GHz afin de r duire les ventuelles interf rences nuisibles avec les syst mes mobiles par satellite du m me canal Le radar de grande puissance est consid r comme l utilisateur principal des bandes de 5 25 5 35 GHz et de 5 65 5 85 GHz Ces stations radar peuvent provoquer des interf rences avec ce p riph rique et ou l endommager Le gain d antenne maximum autoris avec ce p riph rique est de 6 dBi afin de respecter la limite de P I R E pour une plage des fr quences de 5 25 5 35 GHz et de 5 725 5 85 GHz dans un fonctionnement point point La sortie de puissance du dispositif sans fil ou des dispositifs qui peut tre int gr dans votre syst me est bien inf rieure aux limites d exposition de RF tablies par Industrie Canada Regulatory Compliance Statements Son utilisation est soumise aux deux conditions suivantes 1 ce dispositif ne peut
103. program to customize S field click the Add optional button to register the software NVIDIA Optimus is a function that enables automatic selection and usage of the internal or external graphics chipsets depending on the currently running software EA You can register executable files EXE only 4 In the Select the preferred graphics processor for this program O field select High performance NVIDIA processor and click the Apply button For example the internal graphics chipset can be used for Internet surfing or word processing to minimize battery power consumption and the high performance external graphics graphic chipset can be used for gaming or video processing to deliver a more realistic experience Jj NVIDIA Co File Edit View 3D Settings Help ni Fe x ER 7 0 e ZE al You can change the global 3D settings and create overrides for specific programs The ovemides will be used automatically each e The NVIDIA Optimus model supports Windows 7 only OW AT oe Me op md Adjust video image settings I would like to use the following 3D setti e This function is only available in models that support the nC 2 NVIDIA Optimus technology O V Show only programs found on this computer 2 Select the preferred graphics processor for this program High performance WIDIA proce C2 Registering programs to be executed by the external tenta Ambient Occlusion graphics chipset es U
104. puter If water or chemicals enter the computer this may cause fire or electric shock If the computer is broken or dropped disconnect the power cord and contact a service center for a safety check If the notebook computer has an external type removable battery separate the battery also Using a broken computer may cause electric shock or fire hazard Chapter 1 Safety Precautions Getting Started A warning Upgrade Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality Avoid direct sunlight when the computer is in an air tight location such as inside a vehicle There is a danger of a fire hazard The computer may overheat and also present opportunity to thieves Do not use your notebook PC for long periods of time while any part of your body is making direct contact with it The temperature of the product may increase during normal operation This may result in harming or burning your skin Never disassemble the power supply or AC adapter There is a danger of electric shock When removing the RTC Real Time Clock battery keep it out of the reach of children as they could touch and or swallow it There is a danger of choking If a child has swallowed it contact a doctor immediately Use only authorized parts multi plug battery and memory and never disassemble parts There is a danger of damaging the product ele
105. r Sleep mode functions you can quickly turn the computer on and off Press the Power Button The power mode selection window appears Chapter 1 Getting Started Sleep Mode Samsung Fast On Mode 9 You can configure the menus in the power mode selection window by selecting Easy Settings gt Power Management gt Power Button Setting 2 Click on a mode Type Description The LCD is turned off and the computer is turned on Sleep This is a Windows power saving mode and consumes some power The LCD is turned off and the computer is in Samsung the logged off state so that almost no power is Fast On consumed When you start the computer in this mode it is quicker than turning the computer on 3 The computer has entered Samsung Fast On or Sleep mode If you press the computer s Power Button again Samsung Fast On or Sleep mode is canceled and you can resume the previous operation Chapter 2 Using the computer Keyboard Touchpad CD Drive ODD Optional Multi Card Slot Optional Connecting an External Display Device Connecting an External Digital Device Adjusting the Volume Wired Network Wireless Network Optional Using the TPM Security Device Optional Software Launcher Optional Keyboard Chapter 2 Using the computer Shortcut key functions and procedures are discussed in the following sections e The keyboard image may differ from the actual keyboard The keyboard may differ
106. riate to your height The heights are to be adjusted so that your arm forms a right angle when you place your hand over the keyboard while sitting down on a chair Adjust the height of chair so that your heel is comfortably placed on the floor Chapter 1 Getting Started Do not use the computer while you are lying down but only while you are sitting down Do not use the computer on your lap If the computer temperature increases there is a danger of burning yourself Work while keeping your waist straight Use a chair with a comfortable back Keep the center of your leg weight not on the chair but on your feet when you are sitting on a chair To use the computer while talking over the telephone use a headset Using the computer with the phone on your shoulder is bad for posture Keep frequently used items within a comfortable work range where you can reach them with your hands Proper Posture During Computer Use Pars Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least Keep your arm at a right angle as shown by the figure 50cm e Keep the line from your elbow to your hand straight e Adjust the height of the monitor and the LCD screen so that its sr Do not place your palm over the keyboard while typing top height is equal to or lower than your eyes e Donot hold the mouse with excessive force e Avoid setting the monitor and LCD excessively bright l e D
107. se Setting a Boot Password Deactivating the Password 4 gt f Press lt Enter gt on the password to be deactivated For example to deactivate a supervisor password in the Set Supervisor Password item press lt Enter gt In the Enter Current Password item enter the currently configured password and press lt Enter gt Leave the Enter New Password item field empty and press lt Enter gt Leave the Confirm New Password field empty and press lt Enter gt The password is deactivated For some models the password is only canceled if the lt Enter gt key is pressed in the Setup Notice window Chapter 3 Settings and Upgrade Changing the Boot Priority By default the highest boot priority device is set to the CD ROM DVD drive As an example the procedures to change the highest boot priority device to the hard disk drive are described below e The screen images and terms may differ from actual product depending on the computer model and driver version 1 Select the Boot menu in the BIOS Setup 2 Press lt Enter gt on the Boot Device Priority item CS NumLock Off Enable Keypad By NumLock TouchPadMouse Enabled InternalLAN Enabled PXE OPROM Disabled Smart Battery Calibration Chapter 3 Settings and Upgrade Press the down key to move to the SATA HDD item and press the F6 key to move up to the top item Boot Priority Order 1 SATACD XXXXXXXXXXXX 2
108. se contact manufacturer for service e Only use drivers approved for the country in which the device will be used See the manufacturer System Restoration Kit or contact manufacturer Technical Support for additional information Chapter 5 Appendix United States of America USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body especially the face or eyes while transmitting Do not operate the radio or attempt to transmit data unless the antenna is connected if not the radio may be damaged Use in specific environments The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments The use of wireless devices on airplanes is governed by the Federal Aviation Administration FAA The use of wireless devices in hospitals is restricted to the limits set forth by each hospital i Explosive Device Proximity Warning Do not operate a portable transmitter such as a wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use Regulatory Compliance Statements i Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio frequency w
109. se global setting Application controlled Use global setting Application controlled Use global setting Off To run a program using the external graphics graphic chipset you es have to register the program in the NVIDIA Panel Indicates which aranhics nrocessor this nroaram will use For nroarams that require a snecific aranhics nrocessor thi Some programs are pre registered To register more programs e g 3D games etc complete the following steps 5 The program has been registered 1 Right click over the Desktop and select NVIDIA Panel When you run the registered program the program is executed using the external graphics chipset without requiring additional configuration 2 Select 3D Settings gt Manage 3D settings in the left pane and select the Program Settings tab Connecting an External Digital Device You can save a file stored on a device onto the computer by connecting a digital device such as a camera camcorder or mobile phone to the computer and using the file management functions Connecting and using a camera or camcorder If a digital device such as a camera or camcorder is connected with the computer it is recognized as a removable disk so that you can copy or move the files on the device 1 Connect the USB port of the notebook computer and the USB port of the digital device such as a camera using the USB cable Ze e Both the computer and the digital device
110. set up your work area Never insert objects of any kind into the computer ventilation openings Ensure that the fan vents on the bottom of the casing are clear at all times Do not place the computer on a soft surface doing so will block the bottom vents If you use an extension cord with this system make sure that the total power rating on the products plugged into the extension cord does not exceed the extension cord power rating For Notebooks with glossy display bezels the user should consider the placement of the Notebook as the bezel may cause disturbing reflections from surrounding light and bright surfaces NB Ver 3 1 Important Safety Information Care During Use Do not walk on the power cord or allow anything to rest on it Do not spill anything on the system The best way to avoid Spills is to not eat or drink near your system Some products have a replaceable CMOS battery on the system board There is a danger of explosion if the CMOS battery is replaced incorrectly Replace the battery with the same or equivalent type recommended by the manufacturer Dispose of batteries according to the manufacturers instructions If the CMOS battery requires replacement insure that a qualified technician performs the task When the computer is turned off a small amount of electrical current still flows through the computer To avoid electrical shock always unplug all power cables remove the battery and modem cables from t
111. sing any important data and backup your data to prevent any such data loss Precautions for Operating System Support If a problem occurs because of the reinstallation of other operating systems OS or a previous version of a OS pre installed on this computer or a software that does not support the OS the company will not provide technical support a replacement or refund and if our service engineer visits you due to this problem a service charge will be applied Before You Start About the Product Capacity Representation Standard About the capacity representation of the storage The capacity of the storage device HDD SSD of the manufacturer is calculated assuming that 1KB 1 000 Bytes However the operating system Windows calculates the storage device capacity assuming that 1KB 1 024 Bytes and therefore the Capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation E g For a 80GB HDD Windows represents the capacity as 74 5GB 80x1 000x1 000x1 000 byte 1 024x1 024x1 024 byte 74 505GB In addition the capacity representation in Windows may be even smaller because some programs such as Recovery Solution may reside in a hidden area of the HDD Chapter 1 Getting Started About Memory Capacity Representation The memory capacity reported in Windows is less than the actual Capacity of memory This is because BIOS or a video adapter us
112. sing the memory card for the first time you must format the card before using it Formatting a card deletes all data saved on the card If the card includes data backup the data before formatting it 1 Click Start gt Computer 2 Right click over a card drive with the touchpad and select Format 3 Click Start to the formatting Chapter 2 Using the computer To use a card to exchange data with a digital device such as a digital camera formatting the data using the digital device is recommended When you try to use a card which is formatted in the computer in another digital device you may have to format the card again in the device You cannot format write or delete data from a SD or SDHC card with a write protection tab when it is in the Lock position Inserting and removing a memory card repeatedly may damage the memory card Chapter 2 Connecting an External Display Device seb pan If you connect an external display device such as a monitor TV About the connection cable projector etc you can view the picture on the wider screen of the external device when you give a presentation or watch a video or Users should additionally purchase the necessary connection movie cables The computer provides an analog monitor port RGB and a digital video audio port HDMI The visual quality is sharper when a display device is connected through the HDMI port rather than the analog monitor
113. system tray a list of available APs appears If you select an AP to connect to the Connect button appears Net connected il Connections are available Wireless Network Connectior R4_COM_19F i AP List Open Network and Sharing Center 5 38 PM 7 8 2009 ka i TB Chapter 2 Using the computer If a network key is set for the AP enter the network key and then click Connect Click Connect gt For the network key please ask your network administrator Mot connected all Connections are available Wireless Network Connection A R4_COM 19F si Connect automatically ELBRUSAP9 wall Open Network and Sharing Center 3 When Connected to the AP is displayed click the Close button You can access the network Wireless Network Optional Normal Wireless LAN Status If the wireless LAN icon is displayed in the system tray of the Taskbar it indicates that the computer is connected to the Internet properly see below PALL A E lll i Abnormal Wireless LAN Status When the wireless LAN is not connected If the wireless LAN icon is displayed with an X in the system tray of the Taskbar it indicates that the wireless LAN device is turned off or that there are no available APs Or the wireless LAN is disconnected If the wireless LAN is turned off press the key combination to turn it on Chapter 2 Using the computer Q When you are not connected to
114. t time the computer boots up after a Complete Restore has been performed the speed of the boot process may be slowed down due to the system optimization process At this time do not shut the computer down by force Backup Restore Samsung Recovery Solution Optional Chapter 4 Complete Backu p Restore S Samsung Recovery Solution Samsung D Recovery Solution Complete Backup A Complete Backup saves the complete image of the C drive onto another drive or DVD A Complete Restore restores the Eon image file saved by the Complete Backup onto the C drive a E E E E gt Enter a description forthe backup image directly or select one and then click the Next button Backs up the current state of the Windows drive to another drive a DVD or Blu ray disc or an external type storage de You can easi Backup Point 04 29 2010 Backup Capacity 5 1GB Description Save Path D Local Disk 425 7GB Available Y DA Local Disk 425 7GB Available Complete Backup sot If you perform the Complete Backup function onto a DVD or fut a CS removable storage device you can restore your computer ne even when a problem occurs with the hard disk or when the restoration area is removed Select Drive D Select the DVD drive To create a backup a removable storage device with at least 15 GB of free space is required 3 When the option selection item appears select an option and click Next 1 C
115. ter Change the setting to Digital Audio HDMI HDMI Device or Digital Output Device click Set Default and click OK XXXXX High De Default Device Speakers Realtek High Definition Audio ady Configure Set Default hd Properties HDMI Output Device may not appear on the playback device list depending on the computer model In this case turn on the TV connect the TV to the computer using a HDMI cable and then switch to HDMI or LCD HDMI Clone or LCD HDMI DualView mode using the Shortcut Key Fo Fo En To listen to sound on the computer after disconnecting the HDMI TV you have to set the Playback Device to Speakers Connecting an External Display Device a ee Using AMD Graphics Effectively optional PowerXpress is Switchable Graphics technology that selectively enables either the internal or external graphics chipset depending on the program to extend the battery life time while maintaining the graphics performance This technology uses the internal graphics by default to reduce battery consumption and switches to the external graphics when the user uses Some program functions that require a high graphics performance such as games and playing videos Ze e This description is only for Windows 7 and models with i AMD PowerXpress technology e This function is not supported for Windows 7 Starter e If Windows XP is installed you can only use Internal Graphics gt Adding programs for Po
116. the Internet This is indicated by the wireless LAN icon A in the system tray of the Taskbar In this case you have to check the IP address settings Please contact your network administrator and reconfigure the IP address When APs are found but your computer is not connected to the Internet This is the case when an AP with a weak signal has been set to a high priority Connect to an AP with a strong signal by clicking it Currently connected to AccessPoint Internet access The currently connected AP The signal strength is low Wireless Network Connection AccessPoint Connected oul lt WLAN NETGEAR WGR614v9 G28 CH11 ll L An AP with a strong signal strength WLAN LINESVS WRTS54G E2 Nag COM AV CISC0350 B23 WLAN CISCO 1100 G27 CH1 COM AV CISCO1200 B21 WLAN ROAMING COM AV WRT300 639 Open Network and Sharing Center Using the TPM Security Device Optional PN rte Q Setting Up the TPM A TPM Trusted Platform Module security device is a security solution that protects your personal information by saving the user authentication data on the TPM chip installed on the computer p To use the TPM function you have to complete the following To use the TPM security device you have to initialize the TPM chip SE in the BIOS Setup initialize the TPM program and then register ae teuor 1 Initializing the TPM chip Initializes the authentication information saved on the TPM chip gt e This funct
117. the SDRAM and is widely used nowadays This computer uses DDR SDRAM Device Manager An administrative tool used to manage computer devices You can add or remove hardware or update a device driver using the Device Manager DHCP Dynamic Host Configuration Protocol This refers to automatically allocating IP addresses to the users on the network by the network administrators Direct X An application interface developed to enable Windows application programs to access hardware devices at a very high speed Since the operating speed of graphics memory and sound cards must be very fast to provide high quality video and sound for games Direct X enables faster control and interaction between applications and hardware devices By using Direct X the multimedia performance of Windows has been hugely improved Driver Software that interacts between the hardware and the operating system An operating system knows the hardware information and controls the hardware In general a driver is supplied with the corresponding hardware device D sub D subminiature This is the cable connecting a general CRT monitor and the computer Analog video is output through this cable Chapter 5 Appendix Glossary DVD Digital Versatile Disk DVD was developed to replace CD compact disk Although the shape and size of the disc are the same as that of a CD the capacity of a DVD is at least 4 7GB while the capacity of a CD is 600MB DV
118. the computer is cut when you purchase the computer for safety purposes How can I extend the battery usage time The battery usage time may be shortened if you recharge the battery before it is completely discharged To resolve this problem enter the BIOS Setup and select Smart Battery Calibration to discharge the battery completely and then recharge the battery For detailed information on a function refer to the corresponding section of the User Manual Before You Start Chapter 1 Getting Started Before reading the User Guide first check the following on Z Using the software e The software described in the main text can be launched pause ay af Rene using the following menu path gt J Optional items some devices and software referred to in Start gt All Programs the User Guide may not be provided and or changed by Start gt All Programs gt Samsung upgrade For some programs you can launch them by selecting Note that the computer environment referred in the User Start gt All Programs gt Samsung gt Software Launcher Guide may not be the same as your own environment l e When the programs are not installed select Samsung Recovery Solution gt System Software to install the programs Only for models supplied with Samsung Recovery Solution e The pictures used for the cover and the main body in the User Manual are those of the representative model of each series and may differ from t
119. try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Regulatory Compliance Statements If necessary the user should consult the dealer or an experienced radio television technician for additional suggestions The user may find the following booklet helpful Something About Interference This is available at FCC local regional offices Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company The correction will be the responsibility of the user Use only shielded data cables with this system Intentional emitter per FCC Part 15 If fitted with 2 4G band or 5G band Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4GHz 5GHz Band may be present embedded in your notebook system This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in the Un
120. turn to a higher level menu or to move to the Exit menu Setup Menu Description mi a lt gt Press to move to another menu S This is a description about the basic specifications A ysinfo of the computer Enter Enter Press to select an item or to enter a Using this menu you can configure the major sub menu Advanced T chipsets and additional functions m Press to save the changes and exit Used to configure security functions including F10 Set Security etup passwords Boot This menu enables you to configure peripherals and booting related settings such as the boot priority ZB The keyboard image may differ from the actual keyboard Exit Used to exit the Setup either saving the changes or not Setting a Boot Password If you set a password you have to enter the password when you turn the computer on or enter the BIOS Setup By configuring a password you can restrict system access to authorized users only and protect data and files saved on the computer gt e The password setting provides the following 3 sub menus Supervisor Password User Password and HDD Password Do not lose or forget your password e Do not let others know your password e If you forget the Supervisor Password or HDD Password you will need to request assistance from the service center In this case a service fee will be charged e When you forget the User Password you can disable the Supervisor Password
121. uct Do not press the Eject Button while the Floppy Disk CD ROM drive is in operation You might lose data and the disk might be suddenly ejected and could cause an injury Take care not to drop the product while using it This may cause personal injury or loss of data Do not touch the antenna with electricity facility such as the power outlet There is a danger of electric shock When handling computer parts follow the instructions on the manual supplied with the parts Failure to do so may cause damage to the product Safety Precautions noel ED Caution Do not place your face close to the Optical Disk Drive tray when it is operating Failure to follow instructions marked with this symbol may cause slight injury or damage to the product There is a danger of injury due to an abrupt ejection Check CDs for cracks and damage prior to use If the computer emits smoke or there is a burning smell It may damage the disc and cause disorder of device and injury of disconnect the power plug from the wall outlet and contact user a service center immediately If your notebook is external amp removable battery type remove the external battery There is a danger of fire Do not use a damaged or modified CD Floppy Disk There is a danger of damaging the product or personal injury Do not insert your fingers into the PC Card Slot There is a danger of injury or electric shock Use recommended computer cleansing sol
122. uct catalogue CPU Optional Main Memory Intel Dual Core i3 i5 i7 Processor AMD Quad Core A10 A8 Processor AMD Dual Core A6 A4 Processor Memory type DDR3 SODIMM Main Chipset Optional Storage Device Optional Graphics Optional Intel HM65 Intel HM76 AMD A70M 7MmMH 9 5 mmH SATA HDD SSD HDD 16GB iSSD HDD 24GB iSSD Intel HD Graphics Internal AMD HD 7620G Internal AMD HD 7500G Internal AMD HD 7400G Internal AMD HD 7600G Internal AMD HD 7550M PowerXpress NVIDIA GT 620M Optimus Operating Environment Chapter 5 Appendix Temperature 5 40 C for storage 10 35 C when operating Humidity 5 90 for storage 20 80 when operating AC DC Rating Optional Input 100 240VAC 50 60Hz Output 19VDC 2 1A 19VDC 3 16A PC Rating Optional 19VDC 2 1A 40W 19VDC 3 16A 60W En e Optional components may not be provided or different components may be provided depending on the computer model e The system specifications are subject to change without notice e The hard disk drive capacity of a computer in which Samsung Recovery Solution is installed is represented as smaller than the product specification e The amount of memory that Windows can use may be smaller than the actual amount of memory available Chapter 5 Product Specifications Appendix Registered Trademarks ENERGY STAR Partner Dm Asan ENERGY STAR Partner SAMSUNG
123. uency RF wireless communication devices operating in the 2 4GHz 5GHz Band may be present embedded in your notebook system The following section is a general overview of considerations while operating a wireless device Additional limitations cautions and concerns for specific countries are listed in the specific country sections or country group sections The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label If the country you will be using the wireless device in is not listed please contact your local Radio Approval agency for requirements Wireless devices are closely regulated and use may not be allowed The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all international RF exposure limits as known at this time Because the wireless devices which may be embedded into your notebook emit less energy than is allowed in radio frequency safety standards and recommendations manufacturer believes these devices are safe for use Regardless of the power levels care should be taken to minimize human contact during normal operation Some circumstances require restrictions on wireless devices Examples of common restrictions are listed on the next page Chapter 5 Appendix Radio frequency wireless communication can interfere with equipment on commercial aircraft Current aviation re
124. up and then click the Next button 3 Enter a description for the backup in the Description field so that you can easily recognize it later and specify the Save Path If your computer has a DVD Writer you can specify the DVD BEB k drive as the Save Path Chapter 4 Backup Restore jas Samsung Recovery Solution Lx PA Samsung x 7 Recovery Solution Local Disk 425 66GB Available D Local Disk 425 56GB Available E BD RE Drive Select Drive D Select the DVD drive tT If you have specified a hard disk drive or a removable disk as the Save Path the SamsungRecovery SamsungData folder is created on the corresponding drive e g D and the data is saved to the folder Take care to not delete the folder by mistake or on purpose 4 If you click the Next button the Data Backup begins If you have selected the DVD drive as the Save Path the Insert a blank DVD message appears Insert a blank DVD and click the OK button 5 The Backup is completed message appears Samsung Recovery Solution Optional Data Restore 1 UT A W N When backing up onto DVD Turn the computer on and insert the backup DVD into the DVD drive When backing up to a removable storage device Connect the removable storage device When backing up to another drive Proceed to Step 2 When the initial menu screen appears click Restore and then click Data Restore Select a backup item to be r
125. up in progress Speed 19 1 MB sec Copied 6092 6092MB Elapsed 05 19 20 36 di Caution Make sure to connect the power while the backup is performed If the power is turned off during a backup you have to restart the backup from the beginning Chapter 4 Backup Restore When the Restart the System message appears after the backup is complete click OK to restart the system 52 lf the Livelmaging option has been selected the computer is not restarted Samsung Recovery Solution Optional Complete Restore 1 When backing up onto DVD Turn the computer on and insert the backup DVD into the DVD drive If there are multiple backup DVDs insert the first DVD When backing up to a removable storage device Connect the removable storage device When backing up to another drive Proceed to Step 2 2 When the Samsung Recovery Solution start screen appears click Restore and then click Complete Restore Chapter 4 Backup Restore Select a Complete Backup restoration point in the restoration point selection screen and click the Next button The system is restarted Samsung Recovery Solution mi FA Samsung my Recovery Solution Complete Restore This is the program that backs up the current state of the computer and restores Windows when a problem oc Restores the entire Windows drive to the initial or backup status of the co t All current data on Windows drive is re comput
126. ution when cleaning the product and only use the computer when it is completely dried Failure to do so may cause electric shock or fire Emergency disk eject method using paperclip should not be used while the disk is in motion Make sure to use the emergency disk eject method only when the Optical Disk Drive has stopped There is a danger of injury Chapter 1 Safety Precautions Getting Started ED SAUNON Security and Movement Related Failure to follow instructions marked with this symbol may cause slight injury or damage to the product When moving the product turn the power off and separate all connected cables first The product might be damaged or users may trip over the cables Upgrade Related For long periods of not using the notebook computer Take care when touching the product or parts discharge the battery and preserve as it is detached For external amp removable battery type The device may be damaged or you may be injured The battery will be preserved at its best condition Take care not to throw or drop a computer part or device This may cause injury or damage to the product Do not operate or watch the computer while driving a vehicle Make sure to close the computer cover before connecting There is a danger of a traffic accident Please concentrate on the power after a reassembly driving There is a danger of electric shock if your body touches an internal part Use parts authoriz
127. vice drivers and applications 3 After the installation is complete the computer will restart Samsung Recovery Solution Optional System Software Backup 1 When the initial menu screen appears click System Software gt System Software Backup 2 Specify the Save Path Ze If your computer has a DVD Writer you can specify the DVD S drive as the Save Path jas Samsung Recovery Solution a Samsung ru R Recovery Solution System Software Backup Backup Point 04 29 2010 Description Samsung System Software f y Local Disk 425 7GB Avatlable D Local Disk 425 7GB Available Select Drive D Select the DVD drive Chapter 4 Backup Restore If you have specified a hard disk drive or a removable disk as the Save Path the SamsungSoftware folder is created on the corresponding drive e g D and the system software programs are saved to that folder Take care to not delete the folder 3 If you click the Next button the Software Backup begins If you have selected the DVD drive as the Save Path the Insert a blank DVD message appears Insert a blank DVD and click the OK button After the backup the System Software Backup is completed message appears Ze e If you want to install the System Software Programs backed up on the drive run the SecSWMgrGuide exe file in the SystemSoftware folder e When installing System Software Programs from the backe
128. wer saving mode However you cannot add a disk partition for SSD models with integrated Intel Rapid Start technology Chapter 5 Appendix Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment However to ensure safe use of this product it is important that the safety instructions marked on the product and in the documentation are followed Always follow these instructions to help guard against personal injury and damage to your system Setting Up your System Read and follow all instructions marked on the product and in the documentation before you operate your system Retain all safety and operating instructions for future use Do not use this product near water or a heat source such as a radiator Set up the system on a stable work surface The product should be operated only with the type of power source indicated on the rating label Ensure that the electrical outlet you are using to power your equipment is easily accessible in case of fire or short circuit Chapter 5 Appendix Q If your computer has a voltage selector switch make sure that the switch is in the proper position for your area Openings in the computer case are provided for ventilation Do not block or cover these openings Make sure you provide adequate space at least 6 inches 15 cm around the system for ventilation when you
129. werXpress graphics technology You have to register the program to run some functions of a program using the external graphics chipset Some programs are pre registered To register more programs complete the following steps EE 4 e Unregistered programs will run using the internal graphics chipset e You can register executable files EXE only 1 Right click on the Desktop and select Configure Switchable Graphics from the popup menu 2 Click the Browse button and register the software and click the Apply button GRAPHICS Catalyst Control Center AMDA Switchable Graphics Choose whether to run applications on the high performance or power saving graphics processor The high performance processor is better suited for applications that use a lot of 3D graphics video or seem to run poorly on the power saving setting To change the graphics processor associated with an application click the button next to it Recent Applications To configure other applications first browse for them on your computer then select the desired graphics processor Other Applications E Show a pop up warning for unassigned applications 3 From now on some of the functions of the registered program that require a high graphics performance will run with the external graphics chipset without additional configuration Connecting an External Display Device PT ene Using NVIDIA graphics more efficiently 3 In the Select a
130. y consumption When system is running on battery the Wired LAN speed is decreased automatically to reduce battery consumption In such case a 1Gbps 100Mbps LAN would function at 100Mbps 10Mbps speed Wireless Network Optional A wireless network Wireless LAN environment is a network environment that enables communicating between multiple computers at home or a small size office through wireless LAN devices Chapter 2 Using the computer Ze The screen figures and terms may differ depending on the model e Depending on the program version some functions may not be provided or different functions may be provided e The descriptions below are for computer models with a Wireless LAN card or device A Wireless LAN device is optional The pictures in this manual may differ from the actual product depending on your wireless LAN device model e If the wireless LAN is turned off press the key combination to turn it on gt What is an Access Point AP An AP is a network device that bridges wired and wireless LANs and corresponds to a wireless hub in a wired network You can connect multiple wireless LAN installed computers to an AP Wireless Network Optional Connecting to a Wireless LAN through Windows If there is an AP you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows 1 If you click the Network Connections El icon in the
131. y will be the same by discharging the battery completely using the Battery Calibration function and then recharging it again i The screen images and terms may differ from actual product sai depending on the computer model and driver version 1 Disconnect the AC power adapter after turning off the computer 2 Restart your computer and press the F2 button when the Samsung logo appears to start the BIOS Setup 3 4 Chapter 3 Settings and Upgrade Move to the Boot gt Smart Battery Calibration item using the direction keys and press lt Enter gt NumLock Off Enable Keypad By NumLock TouchPadMouse Enabled InternalLAN Enabled PXE OPROM Disabled Smart Battery Calibration Highlight Yes in the Battery Calibration Confirmation window and press lt Enter gt The Battery Calibration function is activated and the battery is forcefully discharged To stop the operation press the lt Esc gt button This operation requires 3 5 hours depending on the battery capacity and the remaining battery charge Using the Security Slot For 14 inch models optional You can secure the computer by connecting a lock and cable to the Security Slot To use this feature you have to purchase the lock and cable additionally To use the lock and cable refer to the product manual Tie the lock and cable to a fixed object and install the other end of the cable to the security slot Chapter 3 Settings and Upgrade
132. you do not remove the film Special film Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power This computer is equipped with an internal battery i Precautions Users cannot remove or replace the internal battery To remove or replace the battery use an authorized service center in order to protect the product and users You will be charged for this service e Use only chargers specified in the User Manual e Never heat the battery pack put it near or in a fire or use at a temperature higher than 60 C as this may cause fire e Please refer to the system operation environment of this manual and operate and store the battery at room temperature product 4 sit a The location of the internal battery y Before using the computer for the first time make sure to s connect the AC adapter and charge the battery completely e The images used for the illustration are of a representative model therefore the images may differ from the the actual Chapter 3 Settings and Upgrade Charging the Battery 1 An internal battery is embedded Connect the AC adapter to the power input jack of the computer The battery will start charging 2 When charging is complete the Charge LED turns green Status Charge LED Charging Red or orange Charging complete Green AC adapter not off connected B
133. you can create files and folders as with a normal drive e g drive C and you can use confidential data saved on another drive by copying the data to the virtual drive PSD Chapter 2 Using the TPM Security Device Optional ane When the virtual drive PSD does not appear You can only use the virtual drive PSD when you have selected the Personal Secure Drive PSD option during the program registration If you have not selected the option during the registration complete the following steps 1 Click start gt All Programs gt Infineon Security Platform Solution gt Manage Security Platform and click the User Settings tab gt Security Platform Features and then Configure 2 When the Initialization Wizard appears select Personal Secure Drive PSD and enter the user password 3 Click Next several times according to the instructions of the Initialization Wizard to finish the wizard When the virtual drive PSD is not loaded To use the virtual drive PSD the virtual drive PSD should be loaded first If it is not loaded you can load it according to the procedures below 1 Right click over the Security Platform P licon in the system tray of the Taskbar and select Personal Secure Drive gt Load from the pop up menu 2 In the load window enter the basic user password and click OK 3 If you click Start gt Computer you will be able to confirm that the Personal Secure Drive is created Note that wh

Samsung 13.3" Series 5 Slim Notebook 500GB HDD NP535U3C User Manual (Windows 7)

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung 13.3&quot; Series 5 Slim Notebook 500GB HDD NP535U3C User Manual (Windows 7)

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung 13.3" Series 5 Slim Notebook 500GB HDD NP535U3C User Manual (Windows 7)