TROUBLESHOOTING AND CHECKS
Contents
1. TROUBLESHOOTING AND CHECKS Monitor switched OFF Check voltage across terminals and 15 20 V D C Check that the power supply generates the elec tronic call notes connect a loudspeaker of 50 100 Ohm between terminals and CH 6E and 8 of the monitor and make a call from the entrance panel Screen with horizontal lines adjust horizontal frequency Vertical shift adjust vertical frequency Monitor switched ON without image detach coaxial cable from camera and check it with a tester it should measure 75 Ohms relative to load resistor placed in last monitor Check whether camera is powered terminals T power 11 13V D C Black bars check voltage between terminals and 5 and 6 should not be less than 15V D C Voltage between terminals T of camera should not be less than 11V D C Distorted or doubled image check if 75 Ohm load resistor is inserted in last monitor or in case of coaxial cable systems if terminal V3 is short circuited on terminal M Whistling sounds in the audio section if when the monitor interphone is lifted a whistling in sound can be heard Larsen effect turn down the speech unit volume by adjusting the potentiometer In the power supply If the problem persists replace speech unit with type 930A or type 930D When using a video outdoor station replace the camera with type 559A or 559B which is equipped with a microphone with long cable to be installed far from the loudspeaker
Download Pdf Manuals
Related Search