TSL 1D Wearable Scanner User Guide
Contents
1. Wearable Scanner docked in the Cradle Product amp Process Engineering Parcels 4 CANADA gt POSTES POST CANADA From anywhere to anyone 5 Removing the Wearable Scanner Battery The battery can then be lifted out and replaced Refit the cover by sliding it back up until the button clicks in place See image below Image 6 Removing the battery from the Wearable Scanner 1 Press in the yellow button 2 Slide the battery cover down and lift it off Product amp Process Engineering Parcels 5 CANADA POSTES CANADA From anywhere to anyone 6 LED Status The status LEDs on the top of the Wearable Scanner provide an indication of the operating status of the unit as per table below Table 1 Status of the LED LED colour Status o The Handscanner is off for a Bluetooth connection connected via Bluetooth The Handscanner is charging Red S The Handscanner is fully charged Red and Green The battery in the Handscanner has a fault or it is being charged outside the recommended temperature range 0 C to 45 C Product amp Process Engineering Parcels 62. TSL 1D Wearable Scanner User Guide Canada Post Corporation Rev 0 October 22 2009 Prepared by Armand Konan Date Oct 22 2009 Reviewed by Date __ Approved by Date __ CANADA POSTES CANADA From anywhere to anyone Table of Contents dls CNT Oe TN Naat fete saat tae teste eaten Aen cla te Nett ea eich Shae eet okie newness l 2 Recharging the Wearable SCANNCT pronen a a OE OE 2 3 Wearing the Wearable SCANNED scecisinnaceridinieiiini iaar E E E soeddacece 3 4 Scanning wih the Wearable SCAMMER scossone E 4 5 Removing the Wearable Scanner Battery cic dco eicsac nen ccubdeaieata sen deol eiceaiced ceuliauiea ers 5 O EED S AN r a NE 6 Product amp Process Engineering Parcels 2 CANADA N POSTES POST CANADA From anywhere to anyone 1 Equipement The images below describe the different parts of the Wearable Scanner and the recharging cradle Image 1 The TSL Wearable Scanner Trigger Button Adjustable finger Battery cover release Docking connector Image 2 The Cradle for the TSL Wearable Scanner Docking port for Handscanner Charge Status LEDs Communications port Input from power connector supply Product amp Process Engineering Parcels 1 CANADA gt POSTES POST CANADA From anywhere to anyone 2 Recharging the Wearable Scanner The scanner is charged by docking it in the cradle Plug the power supply provided with the cra
3. dle in to the power in socket on the back of the cradle The charge time will depend on how discharged the scanner battery is Typically a fully discharged battery will take 3 4 hours to fully charge The LEDs on the top of the scanner indicate the charge status Red for charge in progress Green for charge complete Image 3 Wearable Scanner docked in the Cradle Product amp Process Engineering Parcels 2 CANADA POSTES CANADA From anywhere to anyone 3 Wearing the Wearable Scanner To wear the Wearable Scanner slide your first and middle fingers through the loops as per image below To tighten the loops to hold the scanning device in place adjust the Velcro to fit comfortably Image 4 Wearable Scanner docked in the Cradle Product amp Process Engineering Parcels 3 CANADA gt POSTES POST CANADA From anywhere to anyone 4 Scanning with the Wearable Scanner To scan click on the yellow Trigger Button of the wearable scanner as per image below A red scanning beam will show Make sure that you position the scanning beam all across the entire barcode width Start scanning packets by either a Picking up a handful of items and then scanning and sorting them until you finish the handful Or Picking scanning and sorting item by item c But do not pick up items all together scan them all together and sort them all together d Do not scan non barcoded items Image 5
Download Pdf Manuals
Related Search