Setting up CU-Wireless with Vista / Windows 7 (Certificate Issues
Contents
1. Setting up CU Wireless with Vista Windows 7 Certificate Issues 1 For Windows Vista or Windows 7 turn on your wireless device and search for CU Wireless Click connect and it should then prompt you for your MyCarletonOne username and password Enter these credentials and click connect again to join the CU Wireless network Note If you are having issues connecting to CU Wireless then please try connecting to CU Wireless Help From the Guest Network Login Page click the XpressConnect Automatic Wireless Configuration and follow the steps there to download the auto configuration tool to setup CU Wireless on your system Further Troubleshooting A Download the entrust_2048 certificate cer file to the computer that is having issues or save it to a USB and copy it onto the computer etc The certificate is available from the following link https www entrust net downloads binary entrust_2048 chain_root cer B Disconnect the PC from the wireless C Goto Control Panel gt Network and Sharing Center D Under the Manage wireless networks tab on the left hand side select and remove both the CU Internet and CU Wireless from your list if they are in there E Goto where you saved the certificate and the right click on it and select install certificate F On the install prompts select Open gt Next gt Auto Select Next gt Finish gt Ok It should tell you it successfully installed G Now reconnect to the CU Wireless and logi2. n with your normal username and password If for some reason this does not work try adding cunet at the front of your username i e cunet username H When asked for a connection you will be given the choice to either Terminate or Continue Click on the continue option to proceed If prompted by Windows to choose a network type select Public network to continue It may take 30 seconds for the connection icon to change from the exclamation mark to a normal network icon If this still doesn t work it could be that your computer has a manual DNS entry added To check these please try the following 1 Go to Control Panel gt Network and Sharing Center 2 Click on change adapter settings in the left hand side menu 3 Select your network adapter should say wifi wireless etc right click on it and select properties 4 In the properties window under the connection items select the Internet Protocol Version 4 TCP IPv4 heading and click Properties 5 Make sure that both the IP and DNS are set to obtain addresses automatically if they have details in them then make a note of them first just in case you find you need them later 6 Click OK and Close on the next window This should remake the network connection and connect you to the wireless
Download Pdf Manuals
Related Search