Appendix C 1500 Series Operating Instructions
Contents
1. Appendix C 1500 Series Operating Instructions Refer to the 1500 Series Installation Manual for more information Normal Standby Condition e Green AX POWER LED ON e All other LEDs OFF e All switches in NORMAL position Alarm Condition e Red local zone alarm LED ON e Integral sounder sounds a steady signal e Auxiliary alarm relay contacts transfer and latch e Supervised remote annunciator indication is ON e Indicating circuits turn ON Alarm Disconnect Switch Operated Prior to Alarm Condition For Maintenance Use Only e Disconnects local zone alarm from the auxiliary alarm relay e Disconnects local zone alarm from the alarm indicating cirucits e Red local zone alarm LED turns ON e Supervised remote annunciator indication is ON e Alarm signal from any other zone is not affected Alarm Disconnect Switch Operated After Alarm Condition For Maintenance Use Only e Auxiliary alarm relay contacts remain latched e Alarm indicating circuits are turned OFF e Red local zone alarm LED remains ON e Supervised remote annunciator indication remains ON e Alarm signal from any other zone is not affected Reset Switch Operated e Initiating circuit power removed smoke detectors reset e Indicating circuits turn OFF e Integral sounder sounds steady signal e Auxiliary alarm relay is reset Reset Switch Released e System restored to normal unless initiatin2. condition exists replace the This equipment should be installed in accordance with the National Fire Protection Association s Standard 72 NFPA Batterymarch park Quincy MA 02269 Printed information describing proper installation operation testing maintenance evacuation planning and repair service is to be provided with this equipment Owner s instruction notices Not to be removed by anyone except occupant GE Interlogix 12345 SW Leveton Dr Tualatin OR 97062 Sales 800 547 2556 Technical Support 800 648 7424 Remove this page frame and mount adjacent to control unit ESL 1500 Series Fire Alarm Control Panel 21
3. g devices are not reset Trouble Condition e Yellow system trouble LED is ON e Yellow diagnostic LED is ON e Integral sounder sounds a slow intermittent signal e System trouble relay contacts transfer Sounder Silence Switch Operated e Integral sounder is OFF when system trouble is present e Integral sounder is ON when system is in normal standyby condition e System trouble relay contacts are not affected e Will not silence supervisory alarm supervisory trouble or system alarm signals Supervisory Alarm Signal e Integral sounder sounds a fast intermittent signal e Zone 2 red local zone alarm LED is ON e Zone 2 supervised remote annunciator indication is ON e Auxiliary alarm relay contact do not transfer e Indicating circuits are not activated e Yellow supervisory LED is ON Supervisory Trouble Signal e Indicating sounder sounds a fast intermittent signal e Zone 2 yellow local zone trouble LED is ON e System trouble relay contacts transfer e Yellow supervisory LED is ON Remote Test Fire Drill e Indicating circuits turn ON e Integral sounder sounds a slow intermittent signal e Auxiliary alarm relay contacts do not transfer e LEM module does not transmit e Keying the test switch will pulse the indicating circuits batteries Warning For Service Contact Testing Disconnect the AC power source during testing If after testing a low battery
Download Pdf Manuals
Related Search