SUPPLEMENT TO USER MANUAL V 1.2 FOR
Contents
1. 3600 seconds 1 hour then automatically turn OFF e Text To turn the switch ON or OFF with a text rather than by telephone call send this text command PSSW12345 RLYP ON and PSSW12345 RLYP OFF Each time you text this the relay will go ON or OFF permanently no timer limit as above TIP By doing a copy paste from a previous text it is not necessary to type these commands each time TIP All text commands must be entered EXACTLY as shown in the manual and this supplement That means use ALL CAPS no spaces and nothing else can be in the text such as your signature iPad and iPhone users have a choice of sending SMS texts or iMessages The cell switch only recognizes SMS texts PAGE 2 Corrections The Manual says The Red LED is to indicate that the power is applied to the unit Correction The LED is blue not red and it indicates when the relay is switched ON PAGE 3 Corrections If you want to use the POWER DOWN ALARM feature you need to open the enclosure and plug the standby battery connector into the mating connector on the circuit board PAGE 4 CHECKING SIGNAL STRENGTH If an external antenna is needed to boost a weak signal see our web site for a model and source www ReiffPreheat com GSM SWITCH htm2. SUPPLEMENT TO USER MANUAL V 1 2 FOR CELLULAR SWITCH WT 9005 QUICK START INSTRUCTIONS 1 Obtain and install SIM card For instructions see www ReiffPreheat com GSM SWITCH htm 2 Install antenna and plug switch into a wall outlet Wait for network connection green LED blinks at 3 second intervals 3 Make a telephone call to your SIM s number to turn the switch ON Another call turns it OFF To receive a text reply confirming the switch is ON or OFF activate this feature by sending this text PSSW12345 RLYM ON There are 3 ways to activate the switch e Telephone call without timer Add your SIM card s phone number to your phone s contact list under the name CELL SWITCH Make a telephone call to the SIM s number to turn the switch ON Turn the switch OFF with another phone call or by briefly unplugging the switch from the wall outlet This is how we recommend most users operate the switch because it will be very simple to operate and phone calls are free If you activate it by text you may be charged for the text e Telephone call with timer The default setting is for the switch to stay ON permanently when you activate it with a phone call per above To activate the timer feature send this text command PSSW12345 RLY XXXXX This sets the relay ON time at XXXXX seconds up to a maximum of 99999 about 28 hours For example if you text this PSSW12345 RLY 03600 then each time you call the switch it will go ON for
Download Pdf Manuals
Related Search