Home

0150-0238B DSR-1000eZ User Manual

Contents

1. 5 5 Advanced Menu Communications Use thus menu to specify Baud Rate e The data transfer rate for the RS 232 serial port Ethernet Settings e The units Ethernet network connection settings Ethernet units only Modem Settings e The Modem connection settings o Advanced Menu Communications Baud Rate Use the Jog to select the Baud Rate Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes o Advanced Menu Communications Ethernet Settings An Ethernet session is an active network connection between a PC and the unit with the user viewing live camera images or accessing data stored on the hard disk Only available on ethernet models this warning box will appear Warning Machine will reset if any values change Select OK to continue Kalatel DSR 1000eZ 5 4 0150 0238B Use this menu to configure the Ethernet communications settings Select from the following Hostname Not selectable Pulled from the systems serial number Ethernet Select Enable or Disable DHCP Select Enable or Disable Enables dynamic IP addressing When DHCP is enabled the IP address Subnet Mask Gateway and Server fields are dynamically addressed Name Service Select from Disable or WINS Enabling WINS registers the hostname and IP address within the current Network This ensures that you can connect to the DSR by hostname within t
2. Use the Jog to select On or Off Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes 4 6 Main Menu Archive Setup Use this menu to Selective archive e Select data to be archived and begin archiving process EE Background archive e Restore data from archive device EE EH e Enable background archiving aoa en ena aay ae e Enable or Disable QuickWave Setup Sem ee er e Specify how the unit will handle overwrite issues when the archive medium becomes full e Erase the archived data o Main Menu Archive Setup Selective Archive The Selective Archive feature allows the user to archive recorded data from the hard disk onto a CD DAT AIT RAID or DVSe See the Archiving Addendum for details about using archive devices The Archive Search Filters menu allows the user to search the hard disk for recorded events such as an alarm condition or a previous recording session then select events to be archived for later viewing For example each time Record mode is activated it is considered a separate recording session The Start and Stop date of the search Start Stop e The Start and Stop time of DATE 12 25 00 01 01 01 the search MM DD YY MM DD YY e Which cameras to search Start Stop exclusively TIME 11 11 21 12 34 34 e To search for recorded alarms This menu also provides information on the status of the
3. and exit the LOK menu The Password Was Not Changed 5 11 Advanced Menu Languages Use this menu to select the language the DSR will display French 5 12 Advanced Menu Firmware Upgrade Use this menu to Flash upgrade the DSR via the RS232 Serial port The preferred method to upgrade the unit is via the ethernet using the built in WaveBrowser See section 6 0150 0238B 5 9 Kalatel DSR 1000eZ Firmware Upgrade WARNING Do not power off unit until the operation is done Do you want to continue ox To upgrade the DSR from this menu requires the following items e APC connected to the DSR via the serial port with a null modem cable e The WinFlash program e The upgrade file For further information and for obtaining the upgrade files and WinFlash program please contact GE Interlogix Technical Support at 1 800 469 1676 Selecting OK will put the DSR 1000eZ into Firmware Upgrade mode The unit may now be programmed using WinFlash The Operation may be cancelled by powering off the unit as long as WinFlash has not started Once WinFlash has started any interruption can permanently damage the DSR 1000eZ After a successful upgrade the DSR 1000eZ will automatically reboot with the new firmware Note The unit must be in STOP mode before going into UPGRADE mode A Caution Do not remove power from the DSR 1000eZ after WinFlash has started A successful upgrade can be verified by opening the About
4. 1361959858 ssi The following table specifies the supported options Name Code Description Example Camera c lt n gt Describes either the camera number for c 10 fullscreen 1 Camera 1 16 Camera 16 or the type of the multiscreen display 100 Multiscreen 16 large 101 Multiscreen 16 small 102 Quad screen Size s lt n gt For fullscreen camera describes the size of s 2 the display 1 large 2 medium 3 small Action a lt n gt Describes the action the WaveBrowser has a 2 to take 0 No action 1 Normal Connection Play 2 Normal Connection Live 3 Normal Connection Goto 4 Live Connection Time t lt n gt When action is set to 3 Goto the time t 1361959858 specifies where to go in number of seconds since 01 01 1960 Please Note When an option is not specified it will be set to 0 When a normal connection is requested but the unit is already connected via a normal connection the WaveBrowser should open a live connection instead The default page http lt IP_Address gt does not accept option codes and will open the WaveBrowser in disconnected state The example URL from above http lt IP_Address gt wrcontrollite_c 1s 2a 3t 1361959858 ssi requests the WaveBrowser to make a normal connection play back at 2 27 2003 10 53 32 displaying camera 1 in medium size Kalatel DSR 1000eZ 6 4 0150 0238B 6 3 Upgrading the DSR with WaveBrowser Upgrading the software for the
5. 3 16 175 60fwrcontroite si co Links IP Address Field EJ Done FT Be tocal intranet 0150 0238B 6 1 Kalatel DSR 1000eZ 6 1 WaveBrowser Overview and Controls 23 Wave Browser 1 0 Microsoft Internet Explorer File Edit View Favorites Tools Help Hak gt gt QO Al Asah Favorites Sn Si Ar Address http 3 18 173 60 wrcontrolite ssi Button Panel jt 2 E i D a CO 3 o 5 8 5 a GC Main Viewing Area HD 1s 18 OO Or Drop Down Volume List alo J00 HG The Main program window consists of the following areas e The Main Viewing Area The large blue area e The Button Panel The left side of the window e The Drop Down Volume List Allows the selection of available Disk volumes The Main Viewing Area Pictures are displayed in this area in Multi Camera and Single Camera formats Picture display order is according to the information encoded by the unit used to create the original video data file Choose from the following displays e 16 way Multiscreen Display Large and Medium 4 way Display Single Camera Display Large Single Camera Display Medium Single Camera Display Small Kalatel DSR 1000eZ 6 2 0150 0238B The Button Panel 11 12 13 14 15 16 17 18 19 20 21 1 Play Backward button Click on this button to playback video in reverse 2 Stop button Click on this
6. 4D 73 03 Stop Mode Status Request S SMS E 02 73 4D 73 03 ASCII Status Response Messages Record Mode Status Response Stop Mode Status Response S SMS 3 E Playing and End of Disk 0150 0238B 7 3 Kalatel DSR 1000eZ Kalatel DSR 1000eZ 7 4 0150 0238B 8 FACTORY DEFAULTS Date Format MM DD YY Normal Record Speed 60 pictures per seconds NTSC or 50 pps Pal Alarm Record Speed 60 pictures per seconds NTSC or 50 pps Pal Disk Overwrite Mode Continuous Overwrite Archive Overwrite Mode Not currently implemented Auto Delete Mode Off Background Archive Mode Off Front Panel Locked Off Display Current Time and Date Off Display Record Capacity Off Display Last Alarm Off Display Archive Status Off Network Time Update Interval Daylight Savings Time Off Quickwave Setup Off DHCP Disabled 0150 0238B 8 1 Kalatel DSR 1000eZ WINS Disabled Audio Record Setting Off Kalatel DSR 1000eZ 8 2 0150 0238B 9 TECHNICAL SPECIFICATIONS General Operating Temperature Range Relative Humidity Range Non Condensing Operating 10 to 80 Storage 10 to 95 Dimensions Inches 8 6 x 12 x 2 2 mm 204 x 307 x 56 Weight 10 Ibs 4 5 kg Connections Ethernet Port Optional Composite Video In BNC connector See caution below Audio Video 0150 0238B 9 1 Kalatel DSR 1000eZ On screen Video Indicators Archive Status Pause Rewind End of Data Play Start of Data Fast Forward Record Capacity
7. Caution Erasing the disk removes recorded data without the possibility of restoring it To begin erasing the disk use the Jog to select ERASE then press the Enter button The Erase Disk Warning box will appear Select CANCEL to return to the previous menu or OK to continue All data will be permanently erased Do You want to continue CANCEL OK Erasing Disk To stop the erasing process select CANCEL by pressing the Enter TR button CANCEL Data that was erased before CANCEL was selected will remain deleted permanently 5 3 Advanced Menu 5Audio Record Setting Use this menu to e Enable or Disable the audio recording capability of the DSR Audio Limitations To record audio at least one the unit s video inputs must be set to record video at a rate of 1pps or faster 0150 0238B 5 3 Kalatel DSR 1000eZ 5 4 Advanced Menu Auto Delete Mode Configuring the unit with the Auto Delete mode from 7 to 99 days prevents the unit from displaying or archiving any data that is more than the selected number of days old This feature may be required by law in some jurisdictions please consult with the local authorities Use the Jog to select from 7 99 Days or OFF Press the Enter button to implement the selection If the selection is altered from what was previously selected the confirmation menu will appear Rotate the Shuttle to select Yes or NO ADM Setting ADM will change Are you sure Yes
8. Changes to the unit s parameters are usually made in Pop up menus To exit a Pull down menu press the Menu button Pop up Menus Pop up menus usually have a parameter or several parameters from which the user can make a selection or change the value Use the Shuttle to select a new parameter use the Jog to change the value of that parameter To Save changes and Exit the menu Select OK the press the Enter 0 button ENTER Menu button To Exit the menu without making changes Press the Menu button or select CANCEL then press the Enter button In some boxes items are highlighted on the screen They are represented in this manual as follows Not highlighted Highlighted TIME DATE ALARMS 0150 0238B 3 1 Kalatel DSR 1000eZ Entering the Main menu Enter the Main menu by pressing the Menu button The Main menu will appear on the primary monitor The Main Menu The Main menu provides access to all of the operator programmable options Each sub section of the Main menu is described briefly in this section For complete information about operator programming in the Main menu see section 4 o Main Menu Time Date Use this menu to specify The time format 12 or 24 hours The date format MM DD YY DD MM YY or YY MM DD The time The date Set the Region for the Auto Daylight Savings Time feature Setup clock synchronization between the DSR and the Network Server
9. Male out documentation of the MUX as a guide See Cable Required Connected to PC Null Modem the pin out configuration for the DSR 1000eZ below Cable Required Connected to Multiplexer Variable depending on pin out configuration of MUX 0150 0238B 1 5 Kalatel DSR 1000eZ DB 9 Pin Configuration for Serial Port DB 9 Connector on Back Panel Video Input and Output The unit is equipped with a Composite video input Composite Input 75 Ohm BNC connector and output The video input is auto terminating Composite Output 75 Ohm BNC connector Composite Looping Yes while unit is On or Off 1 8 Accessories UO Port The back panel of the unit is equipped with an Accessories Port DB 9 ACCESSORIES style connector Connect the Accessories PCB supplied with the unit to 1 5 the Accessories Port Wire all accessories to the Accessories PCB O OOOOO O Do not attempt to wire accessories directly to the DB 9 connector 6 0000 9 If the Accessories PCB is lost or missing contact GE Interlogix Customer DB 9 Connector on Service for a replacement Part Number 0900 0127a As a substitute Back Panel purchase a female DB 9 connector and make all connections as shown in this section Pin 1 Alarm In Pin 6 Error Out Pin 2 Alarm Out Pin 7 Ground Pin 3 Record Start In Pin 8 Videoloss Out Pin 4 Alarm Record Reset Pin 9 Disk End Out Pin 5 VEXT Pulse Out Pin 10 Ground Accessories PCB Alarm In An alarm
10. Pressing the Enter button on the last character will complete the password selection and the unit will display the Advanced menu o Main Menu About Use this menu to display information about the DSR 1000eZ Select Main Menu About to display the About DSR 1000eZ screen Serial Number V201 F04 310209 Software Version 2 07 Software Date July 23 2003 16 40 18 Software Checksum 96B89D8B Boot Code Ver 1 01 Disk Size 1004 00 GB Ethernet information will not be displayed unless the DSR 1000eZ is an ethernet supplied model Kalatel DSR 1000eZ 3 4 0150 0238B The Advanced Menu For security reasons a password is provided to limit access to the Disk Overwrite Mode Advanced menu For instructions about entering the Advanced menu Disk Maintenance see Main Menu Advanced Menu on the previous page Audio Record Setting The Advanced menu provides access to all of the installer Auto Delete Mode programmable options Each sub section of the Advanced menu is Communications described briefly in this section Multiplexer Format For complete information about installer programming in the Advanced 3 menu see section 5 Adjust Picture Front Panel Lock Factory Settings Change Password Languages Firmware Upgrade a Advanced Menu Disk Overwrite Mode Use this menu to specify how the unit will handle disk overwrite issues once the hard disk becomes full Select either Select Mode e No Overwrite e Overwr
11. Selects a Large 4 way display View Live Button Click on this button while connected to view live video Play Pointer Slider Bar The Play Pointer slider bar advances to the right to indicate the playback position on the disk The user can drag the bar to navigate forward or backward Goto Button Click on this button to go to the selected date for the drop down time and date boxes Drop down Date Selection Menu Click on this field to display a graphic calendar to select a date to view Time Selection Menu Click on the Up or Down Arrows to select a specific time to view The Drop Down Volume List Box Click on the arrow to display a list of available disk volumes on the connected unit Click on the volume to select 0150 0238B 6 3 Kalatel DSR 1000eZ 6 2 DSR WaveLink A new feature with DSR software version 2 07 is the DSR WaveLink This feature allows putting command codes in the URL when calling WaveBrowser to control actions the WaveBrowser is going to perform This feature can be used by Web Developers to link various cameras to specific Web content 6 2 1 Functionality The traditional WaveBrowser URL is http lt IP_Address gt wrcontrollite ssi This URL will start the WaveBrowser in the disconnected state DSR software version 2 07 supports command codes placed after an underscore after wrcontrollite and before ssi In the following example the options are in bold Example http 3 18 172 230 wrcontrollite_c 1s 2a 3t
12. archive device To 2 3 4 5 6 7 8 CAMERA IL IL JI 11 CANCEL START SEARCH Kalatel DSR 1000eZ 4 10 0150 0238B Searching for All Recorded Events Using the Shuttle to navigate highlight START SEARCH then press the Enter button The Archive Search Results window will appear For information about selecting a recorded event see Selecting from the Archive Search Results in this section Specifying Search Parameters Selecting a Start and Stop Date 1 Using the Shuttle to navigate highlight the DATE parameter then press the Enter button The unit will enter Edit mode 2 Use the Jog to change the start and stop date values Use the Shuttle to navigate among the different parameters To activate the start or stop date parameter use the Jog to place an X in the check box Press the Enter button at any time to exit Edit mode Selecting a Start and Stop Time 1 Using the Shuttle to navigate highlight the TIME parameter then press the Enter button The unit will enter Edit mode 2 Use the Jog to change the start and stop time values Use the Shuttle to navigate among the different parameters To activate the start or stop time parameter use the Jog to place an X in the check box Press the Enter button at any time to exit Edit mode Selecting Cameras to Search 1 Using the Shuttle to navigate highlight the CAMERA parameter then press the Enter button The unit will enter Edit mode Use
13. box and checking the date and checksum of the upgrade firmware Kalatel DSR 1000eZ 5 10 0150 0238B 6 WAVEBROWSER The DSR has an integrated WebBrowser interface The WaveBrowser option allows the user to view video from any ethernet connected DSRs with software version 2 07 or above For WaveBrowser to function properly certain ActiveX controls must be set correctly To setup the ActiveX controls 1 Click on the Tools Internet Options Menu in Internet Explorer Click on the Security tab Select Local Intranet for the Web Content Zone Click on the Custom Level button Ensure that both Download unsigned ActiveX controls and Initalize and Script ActiveX controls not marked as Safe are set to Prompt Click the OK button Click on the Yes button in the Warning message Click the OK button in the Internet Options window To access the web interface 1 Launch Internet Explorer version 5 5 or later on any local Internet connected PC or laptop 2 Type in the DSR s IP address or hostname in the address field and press enter The Enter Network Password box should appear 3 Enter the correct Username and Password in their respective fields the default username and password is admin Click the OK button 4 The WaveBrowser window should appear Type the IP address in the IP Address Field and click the Connect button 0 Microsoft Internet Explorer l t speck gt O A Ash Grae soy Ar address EI hetp
14. by GE Interlogix for neither its use nor any infringements of rights of third parties that may result from its use No license is granted by implication or otherwise under any patent or patent rights of GE Interlogix The Kalatel brand name and product model numbers are the property of GE Interlogix COPYRIGHT 2004 The contents of this manual may not be copied or reproduced in any manner or form without the prior written consent of GE Interlogix 0150 0238B ii Kalatel DSR 1000eZ Kalatel DSR 1000eZ iv 0150 0238B CONTENTS 1 FEATURES CONNECTIONS AND SETUP nuuuuuusnnnnnnnnnonnnnnnnnnnnnnnnnnnnnnnnnnnnnn 1 1 Tal Product NN Un E 1 1 1 2 Fe lures SABANG 1 1 1 3 UNPACKING aaa BANGKANG aaa nn Rn NGAY Ariaan 1 1 1 4 Installation Environment uuusuunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 1 2 1 9 E d TE 1 2 1 6 Front Panel Gottes aa eege Eege 1 3 1 7 Back Panel Gonner 1 4 1 8 Accessories l O Porn nn 1 6 1 9 Setting the Time and Dale 1 8 1 10 Setting the Alarms een Eee En naRee Enge 1 10 2 USER el le 2 1 2 1 ROGCORGING EE 2 1 2 2 5 PIAVO ACK EN 2 2 2 3 The n En Cl 2 4 2 4 Specifying Search Parameters uuuuunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 2 4 3 THE MENU SYSTEM uuuuuuunnnnnnnnnn nn nn nn nun nun nun nun nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 3 1 4 OPERATOR PROGRAMMING cssscccssseccccsseeecesseecceceeeecesseecenseeeeesesensesesene
15. condition can be activated by an Active Low TTL input Input Active Low TTL w pull ups or by relay contact devices such as pressure pads passive or Normally Open Relay infrareds door switches or other similar devices High 5V 12V tolerant Low Ground Minimum Duration 0 5 Seconds Kalatel DSR 1000eZ 1 6 0150 0238B Figure 1 4 Normally Open Relay Alarm Connection Alarm Input Normally Open Closes During Alarm Ground lt Pin 7 or 10 Accessories PCB Typical Alarm Device Refer to each alarm devices s manual for specific wiring details Alarm Out The Alarm output is activated when a teletext alarm is detected Output Active Low or while the Alarm Input is active The Alarm output is only High 12V active for the duration of the alarm event Low Ground Current Out 50mA Max Short Circuit Protected Low for duration of alarm Record Start In Record Start In will place the unit in Record mode when Input Active Low TTL w pull ups activated Compatible with the Disk End Out signal from a or Normally Open Relay second unit High 5V 12V tolerant Low Ground Minimum Duration 0 5 Seconds Alarm Record Reset This feature is for future development and has not yet been implemented VEXT Pulse Out The Video External Pulse connection VEXT simplifies Output Active Low multiplexer operation by automatically synchronizing the High 5V Multiplexer and the DSR 1000eZ Low Ground 0 8V Max Th
16. the menu without making changes Kalatel DSR 1000eZ 5 6 0150 0238B 5 6 Advanced Menu Multiplexer Format The DSR 1000eZ is compatible with several different brands of multiplexers Use this None menu to specify the Playback format of the multiplexer If the unit not connected to a Kalatel multiplexer select NONE Robot Use the Jog to select the Multiplexer format DM Press the Enter button to confirm the selection and exit the menu Philips OR Pelco Press the Menu button to exit the menu without making changes Sanyo Philips REO Note The DSR 1000eZ can auto detect the camera type connected NTSC or PAL The Navco multiplexer is only available on NTSC units Certain menu items may be grayed out and unavailable under certain circumstances The Vista VLM is grayed on Navco the menu to the right because the DSR 1000eZ has auto detected that an NTSC input ATV signal is connected ATV QSP Vista VLM QSI 1700 Diebold Panasonic 5 7 Advanced Menu Adjust Picture Use this menu to specify the Brightness Contrast and Saturation of the video input Brightness Adjustments made to the video input will alter the recorded image Contrast Saturation o Advanced Menu Adjust Picture Adjust Brightness Use this menu to increase or decrease the brightness of the image Adjust Brightness 1 Use the Shuttle to navigate to the numbers 2 Use the Jog to increase or decrease to brightness lc 3 To S
17. via the RS232 Serial port The preferred method to upgrade the unit is via the ethernet using the built in WaveBrowser See section 6 Firmware Upgrade WARNING Do not power off unit until the operation is done Do you want to continue ox To upgrade the DSR from this menu requires the following items e APC connected to the DSR via the serial port with a null modem cable e The WinFlash program e The upgrade file For further information and for obtaining the upgrade files and WinFlash program please contact GE Interlogix Technical Support at 1 800 469 1676 Kalatel DSR 1000eZ 3 8 0150 0238B 4 OPERATOR PROGRAMMING 4 1 Main Menu Time Date Use this menu to specify Haw Date e The time format 12 or 24 hours Time e The date format MM DD YY DD MM YY or Date YY MM DD un egion H The time Network Time Protocol e The date e Set the Region for the Auto Daylight Savings Time feature e Setup clock synchronization between the DSR and the Network Server o Main Menu Time Date Set Time Format To set the Time format use the Jog to select the desired Time format Time Format Setup Format the time as either 12 HOUR Select Format 24 HOUR Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes a Main Menu Time Date Set Date Format To set the Date format use the Jog to select the de
18. 02 20 07 10 0 04 35 15 001 01 21 2002 20 08 10 0 40 18 55 002 01 21 2002 09 10 00 38 003 01 21 2002 ORO 071 722 004 01 22 2002 07 10 00 07 005 01 23 2002 07 10 08 56 006 01 24 2002 30727120 00 06 007 01 25 2002 Sib 57 31 008 01 26 2002 07 10 00 46 43 9 matches found ENTER to play event Selecting from the Search Results Use the Shuttle to select a recorded event Press the Enter button to select the event or press the Menu button to exit the Search Results menu 0150 0238B 2 5 Kalatel DSR 1000eZ Kalatel DSR 1000eZ 2 6 0150 0238B 3 THE MENU SYSTEM This section provides a brief overview of the menu system for complete information about Operator and Installer programming see section 4 Operator Programming or section 5 Installer Programming How to use this Manual Throughout this manual there are headings like these o Main Menu Timer Settings Meaning From the Main menu select TIMER SETTINGS then press the Enter button A Pop up or Pull down menu will appear o Main Menu Record Settings Normal Record Speed Meaning From the Main menu select RECORD SETTINGS then press the Enter button This opens another menu In this menu select NORMAL RECORD SPEED then press the Enter button A Pop up or Pull down menu will appear Pull down Menus Pull down menus are the top level menus Make a selection in a Pull down menu to enter the appropriate sub menu typically a Pop up menu
19. ATA is indicated near the upper left hand corner of the primary monitor 0150 0238B 2 3 Kalatel DSR 1000eZ 2 3 The Search Interface The Search Interface feature allows the user to search the hard disk for recorded SEARCH events such as an alarm condition or a previous recording session For example 4 each time Record mode is activated it is considered a separate recording 2 session O To enter the Search Filters menu press the Search button The Search Filters menu is displayed on the primary monitor Search button e The Start and Stop date of Start Stop the search DATE 12 25 00 01 01 01 e The Start and Stop time of MM DD YY MM DD YY the search Spare Stop e Which cameras to search TIME 11 11 21 12 34 34 exclusively e To search for recorded Ta 28 EST alarms CAMERA IL IL JI JI IL CANCEL START SEARCH Searching for All Recorded Events Using the Shuttle to navigate highlight START SEARCH then press the Enter button The Search Results window will appear For information about selecting a recorded event see Selecting from the Search Results in this section 2 4 Specifying Search Parameters Selecting a Start and Stop Date 1 Using the Shuttle to navigate highlight the DATE parameter then press the Enter button The unit will enter Edit mode 2 Use the Jog to change the start and stop date values Use the Shuttle to navigate among the different parameters To activate the start or stop
20. Change Password sssssseeeeeeeeeeeseeeeeeeeeeeeeeeeeeeeeeeeneees 5 9 0150 0238B v Kalatel DSR 1000eZ 5 11 Advanced Menu Languages uunuuuuunnnnnnnnnnnnnnnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 5 9 5 12 Advanced Menu gt Firmware Upgrade u4242200000000nnnnnnnnnnnnnnn nun 5 9 6 WAVEBROWSER RARESPRRNEEDURRDNEEEERERBEIEE RENEBENEBEEEEEPERSEEEEEEFEEEBERTHERBERGEBEEEEFEEEEER 6 1 6 1 WaveBrowser Overview and Controls uuuss4444200000000nnnnnn nn nnnnnnnn nun 6 2 6 2 DSR Wavelink nun ERESEREEKAE EE ERR EEEEEEEEEREEEKEeE ge EKe 6 4 6 2 0 Functionality ep nn aag naasa aag REE Ae GS oe SS SE 3GIG IC EO AO 6 4 6 3 Upgrading the DSR with WaveBrowser unnnuuunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 6 5 7 RS 232 REMOTE PROTOCOL eege ege 7 1 8 FACTORY DEFAULTS iiaiai AGA 8 1 9 TECHNICAL SPECIFICATIONS ccccsssssesssseseeeeeeecceenssenssesseeeeeseeeeooconssssseeees 9 1 10 WARRANTY AND SERVICE uuuu200000000000nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 10 1 IST ele RE 10 1 10 2 Warranty and Return Information 10 2 Kalatel DSR 1000eZ vi 0150 0238B 1 FEATURES CONNECTIONS AND SETUP 1 1 Product Description The DSR 1000eZ is a Digital Video Recorder designed to be a direct replacement for a Time Lapse VCR Digital Video Recording allows the user to have continuous recording on a hard disk without the need for replacing or rewinding of videotapes The DSR 1000eZ provides menu base
21. DSR is accomplished via the ethernet port and a PC Laptop equipped with a web browser To properly upgrade the Kalatel DSR the following preconditions must exist 1 The Flash upgrade file and path This file is obtained by calling Kalatel Technical Support at 1 800 469 1676 When calling please have the following information available e The model number of the product e The serial number and revision of the product e The current firmware version e The date purchased e Symptoms of the unit that might require upgrade 2 The DSR unit connected to a PC equipped with Microsoft Internet Explorer version 5 5 or later via ethernet cable 3 The IP address of the DSR 4 WaveReader software must NOT be connected to the DSR Please exit all non essential software on the PC 5 Ensure that the DSR is not currently recording or archiving Follow the steps below to Upgrade the DSR Step 1 Launch the Browser software Microsoft Internet Explorer 5 5 or later Step 2 Enter the IP address of the DSR in the address field of the Browser followed by upgrade ssi and press enter For example if the IP address is 3 18 173 71 type 3 18 173 71 upgrade ssi Step3 The Enter Network Password window should appear Enter the correct Username and Password in their respective fields The default username is admin and the password is admin It is recommended that the defaults be changed ASAP Click the OK button The DSR upgrade page should appea
22. NCEL OK Kalatel DSR 1000eZ 4 2 0150 0238B o Main Menu Time Date Set Region Use this menu option to set the region for the Auto Daylight Savings Time feature Choices are Regional Settings e OFF Clock will not be changed automatically Daylight Saving USA e USA DST starts at 02 00 on the first Sunday in Tamo Zone EEN April DST ends at 02 00 on the last Sunday in October Includes United States except Hawaii SUN 6 APR 2003 02 00 1 American Samoa Guam Puerto Rico Virgin SUN 26 OCT 2003 02 00 1 Islands parts of Indiana and Arizona and Canada except Saskatchewan e EUR DST starts at 01 00 GMT on the last CANCEL ER Sunday in March DST ends at 01 00 GMT on the last Sunday in October Includes European Union Countries e AUS DST starts at 02 00 on the last Sunday in October DST ends at 03 00 on the last Sunday in March Includes South Australia Victoria ACT NSW Excludes Tasmania The clock will only be automatically adjusted once on a given time and date If you manually set the clock back before the last DST change the time will not get automatically adjusted again for that same time change LI Main Menu Time Date Network Time Setup Use this menu to enable disable and specify how often time synchronization should occur between the DSR and the Network Server The Region Time Zone must be setup prior to enabling the option Update Interval Select from Enable Disable On
23. Of LOCK KEYBOARD Lock Keyboard Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes 5 9 Advanced Menu Factory Settings Use this menu to enter the Factory Password and restore the unit to the factory defaults Please Enter The Factory Password Use the Jog to select a character then use the Enter button to complete the selection and move to the next character B Pressing the Enter button on the last character will complete the password selection and return the unit to the factory default configuration Kalatel DSR 1000eZ 5 8 0150 0238B 5 10 Advanced Menu Change Password Password Enter A New Password Use the Jog to select a character then use the a Enter button to complete the selection and move to Cen the next character Pressing the Enter button on the last character will open the Confirmation Box Re enter the New password Confirmation Box Pressing the Enter button on the last character will SEET complete the password selection 9 If the password in the Confirmation Box matches the password from the Password box this message will appear The New Password Has Been Accepted Press the Enter button to select OK and exit the OK menu If the password in the Confirmation Box does not match the password from the Password box this message will appear Press the Enter button to select OK
24. POWER ALARM DSR 1000eZ amp PLAY PAUSE SEARCH REC PLAY SPEED RECORD REVERSE PLAY STOP O 0410 cO Kalatel DSR 1000eZ Single Channel Color Digital Video Recorder User Manual WARNING To prevent fire and electric shock do not expose this product to rain or moisture The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that maybe of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product CAUTION To prevent electric shock do not remove cover No user serviceable components are inside Refer servicing to qualified service personnel CAUTION Lithium Battery ATTENTION Danger of explosion if battery is This product contains a recyclable lithium battery incorrectly replaced Replace only It may be illegal to dispose of this battery with the same or equivalent type improperly under local state or federal laws recommended by the Check with your local waste management officials manufacturer for disposal and recycling options CAUTION Electrostatic Sensitive Device Use proper CMOS and MOSFET handing precautions including approved grounded wrists
25. Time and Date Last Alarm Reverse Play Video Loss Audio Record Speed Playback Speed Part Numbers Accessories PCB 0900 0127 User Manual 0150 0238 Archiving Addendum 0150 0145 WaveReader Software CD Optional 0151 0005 WaveReader Software Manual Optional 0150 0143 All specifications are subject to change without notice GE Interlogix believes all specifications are correct but no liability is assumed for omissions or errors Kalatel DSR 1000eZ 9 2 0150 0238B 10 WARRANTY AND SERVICE 10 1 Factory Service Warning Do not open the top cover or attempt to service the unit as this may expose you to dangerous voltages and other hazards Programmer maintenance of this unit is limited to external cleaning and inspection Refer all servicing to qualified personnel If the unit requires factory service contact the dealer who supplied the unit to you for the correct procedures on returning the unit to the factory or the nearest factory service center If the dealer is not available contact the manufacturer of the unit as detailed below and request a Return Material Authorization number RMA The unit s serial number must be provided before a RMA number can be issued Units returned to the factory for service must have freight and insurance prepaid and must show the RMA number clearly on all shipping documents The failure symptoms must be clearly described by the operator and enclosed with the unit together with a copy of th
26. UALITY setting 9 Use the Jog to enter the record quality Low Medium or High Higher record quality settings use more disk space 0150 0238B 4 5 Kalatel DSR 1000eZ 10 When finished entering the Record Quality use the Shuttle to navigate to the ON OFF setting 11 Use the Jog to Activate Deactivate or Delete the recording 12 When finished press the Enter button to exit the Edit mode Use the Jog Shuttle to navigate to OK then press the Enter button to complete the selection Editing a Timed Recording 1 Using the Jog Shuttle to navigate highlight the event parameter you wish to edit 2 Press the Enter button to enter the Edit mode EDIT MODE will appear on screen in the lower left hand corner of the pop up menu 3 Use the Jog to change the values Use the Shuttle to navigate among parameters in the same row 4 When finished press the Enter button to exit the Edit mode Use the Jog Shuttle to navigate to OK then press the Enter button to complete the selection Deleting a Timed Recording 1 Using the Jog Shuttle to navigate highlight the ON OFF parameter of the event you wish to delete Press the Enter button to enter the Edit mode Use the Jog to select DEL from the menu Press the Enter button to confirm the selection and exit the Edit mode a Fen Use the Jog Shuttle to navigate to OK then press the Enter button to remove the selection and exit the menu 4 4 Main Menu Record Set
27. ast recording e _ Recording stops when end of disk is reached when disk is full e When the end of the disk is reached the unit displays an on screen message indicating that the disk is tZ full and the unit has stopped recording User must acknowledge the on screen message by pressing the Enter button e _ Unit will not record over previously Unit Stops recorded data To continue Recording when this Physical Start recording the data must be erased point is reached and End of Disk or deleted in the Advanced E Disk Maintenance menu No Overwrite Mode 0150 0238B 5 1 Kalatel DSR 1000eZ o Advanced Menu Disk Overwrite Mode Overwrite Once Functions of Overwrite Once mode e Recording always starts at end of last recording New recorded data e The unit overwrites all previously recorded data e _ Recording stops before the unit overwrites any of the new recorded data data from the current record session e When the end of the disk is reached the unit displays an on screen message indicating that the disk is full and the unit has stopped Physical recording User must acknowledge Start of Disk the on screen message by pressing the Enter button Unit Stops Recording when this point is reached Overwrite Once Mode e The unit will continue recording again when the user presses the Record button o Advanced Menu Disk Overwrite Mode Continuous Overwrite Function
28. ave the changes and Exit the menu Use the Shuttle to CANCEL OK select OK then press the Enter button OR 4 To Exit the menu without making changes Use the Shuttle to select CANCEL then press the Enter button 0150 0238B 5 7 Kalatel DSR 1000eZ o Advanced Menu Adjust Picture Adjust Contrast Use this menu to increase or decrease the contrast of the image Adjust Contrast 1 Use the Shuttle to navigate to the numbers 2 Use the Jog to increase or decrease to contrast O a 3 To Save the changes and Exit the menu Use the Shuttle to CANCEL OK select OK then press the Enter button OR 4 To Exit the menu without making changes Use the Shuttle to select CANCEL then press the Enter button o Advanced Menu Adjust Picture Adjust Saturation Use this menu to increase or decrease the saturation of the image Adjust Saturation Saturation refers to the amount of color displayed in the image 1 Use the Shuttle to navigate to the numbers EE CANCEL OK 2 Use the Jog to increase or decrease to saturation 3 To Save the changes and Exit the menu Use the Shuttle to select OK then press the Enter button OR 4 To Exit the menu without making changes Use the Shuttle to select CANCEL then press the Enter button 5 8 Advanced Menu Front Panel Lock Use this menu to Lock or Unlock the front panel Unlock Keyboard Use the Jog to select UNLOCK KEYBOARD
29. below is for use with Hayes Accura 56k Diamond Supra Express 56k and 5686 US Robotics modems in their default conditions Consult with the modem manual 0150 0238B 5 5 Kalatel DSR 1000eZ a FON before attempting to make any changes It is strongly recommended that the modem initialization string only be modified by a qualified technician To enable modem communication select enable in the Modem Status field To modify the modem settings follow the steps below Modem Settings Modem Status DISABLE Modem Init String AITESDR OA 10 Kolta BJ TS eh Ae an Default Modem String CANCEL OK With the Modem Init String highlighted press the Enter button to enter the Edit mode The character bank will appear in the center of the menu Press the Sequence button to select the desired character bank Rotate the Shuttle to navigate the Modem Init String Rotate the Jog to select a character from the character bank Use the Number 2 button or rotate the Shuttle to insert the desired character from the character bank into the Modem Init String and advance to the next character Use the Number 1 button to insert a blank character When finished press the Enter button To save the changes and reboot select OK then press the Enter button The unit will only reboot if changes were made to the Modem Init String To exit the menu without making changes select Cancel then press the Enter button Pressing the Menu button also exits
30. button to halt all playback operations The Play Pointer Slider Bar moves to the start of data Play Forward button Click on this button to playback video a co d 2 ER y LE Ed o a 5 g Single Frame Rewind button Click on this button to rewind the video a single frame 5 Pause button Pauses playback until the Pause button is pressed again Clicking any of the buttons except Stop will also resume playback The Play Pointer slider bar stays at the current position while paused a sla ze 6 Single Frame Advance button Click on this button to advance the video a single frame 7 Rewind button Click on this button to perform high speed reverse playback 8 Fast Forward button Click on this button to perform high speed playback 9 IP Address Field Enter the unit s IP address 10 Password Field Enter the unit s password if necessary G66 668 6060 Live check box Click in this box to enable live viewing before connecting Connect Disconnect button Click on this button s to connect to the unit Number buttons Press any of these buttons to call up individual cameras for display When connected to a unit that has more than 16 cameras click on one of the multiscreen buttons to cycle through the remaining cameras Single Camera Display Size Choose from Small Medium or Large 16 way Multiscreen button Choose from a Medium 16 way or Large 16 way 4 way Multiscreen button
31. ce per Day Twice per Day and Once per Hour NTP Primary Server Enter IP Address of Primary Server NTP Backup Server Enter IP Address of Backup Server 1 To save changes and exit the menu Select OK then press the Enter button 2 To exit the menu without making changes Press the Menu button or select CANCEL and then press the Enter button Network Time Protocol Setup Update Interval DISABLE NTP Primary Server 32237 We 26 NTP Backup Server 0 amp CANCEL OK Last Update Never Since Power up Warning Region Time Zone must be set correctly 0150 0238B 4 3 Kalatel DSR 1000eZ 4 2 Main Menu Alarms Hardwire Alarm HE e Whether an alarm condition will be activated when the unit detects a signal on the Alarm In connection Teletext Alarm Disable e Whether a teletext alarm signal generated by a Alarm Peeze oe nants multiplexer or other device will cause the unit to CANCEL OK activate an alarm condition e Whether the internal buzzer is activated during an alarm condition A feature unique to the DSR 1000eZ is its ability to detect alarms via teletext provided within the video signal Standard Time Lapse VCRs can only detect an alarm if the alarm output signal of the Mux is wired directly to the alarm input of the VCR using the VEXT connection This teletext alarm detecting feature of the DSR 1000eZ is compatible with the following styles of Multiplexers e Kalatel e Philip
32. ck box Press the Enter button at any time to exit Edit mode Selecting a Start and Stop Time 1 Using the Shuttle to navigate highlight the TIME parameter then press the Enter button The unit will enter Edit mode 2 Use the Jog to change the start and stop time values Use the Shuttle to navigate among the different parameters To activate the start or stop time parameter use the Jog to place an X in the check box Press the Enter button at any time to exit Edit mode Selecting Cameras to Search 1 Using the Shuttle to navigate highlight the caMERA parameter then press the Enter button The unit will enter Edit mode Use the Shuttle to navigate among the different cameras Use the Jog to select a camera or cameras by placing an X in the check box Press the Enter button at any time to exit Edit mode 0150 0238B 4 13 Kalatel DSR 1000eZ Searching for Recorded Alarms 1 Using the Shuttle to navigate highlight the ALARM parameter then press the Enter button The unit will enter Edit mode Use the Jog to activate the alarms search by placing an X in the check box Press the Enter button at any time to exit Edit mode Starting the Search Using the Shuttle to navigate highlight the START SEARCH parameter then press the Enter button The Restore Search Results menu will appear Please note that restoring data indicated in this menu is not currently supported on the DSR 1000eZ unit Press the Menu butt
33. d search capabilities for recorded events as well as access to live or recorded data via the Ethernet optional 1 2 Features Single channel Composite Video Input Output connection Accepts Single Camera input or a Multiplexed input from most popular multiplexers Compatible with Color or Monochrome cameras Records up to 60 pictures per second NTSC or 50 pictures per second PAL Continuous Recording in Disk Overwrite mode Video Archiving via the unit s SCSI port Access to Live or Recorded video via the Ethernet Ethernet option only Continues Recording while Archiving or transmitting data via the Ethernet Ethernet option only A simple on screen menu system Includes WaveReader software for viewing Live or Recorded images on a PC Ethernet option only Timed recording Audio Recording Audio option only Programmable Auto Delete Mode Auto Daylight savings time change function Clock synchronization with Network Server Integrated WaveBrowser Software Dynamic IP addressing DHCP 1 3 Unpacking Check the package and contents for visible damage If any components are missing or damaged contact the supplier immediately Do not attempt to use the unit If for any reason they must be returned the contents must be shipped in the original packaging Package Contents The DSR 1000eZ unit Accessories PCB The DSR 1000eZ user manual 0150 0238B 1 1 Kalatel DSR 1000eZ e WaveReader software with User Manua
34. date parameter use the Jog to place an X in the check box Press the Enter button at any time to exit Edit mode Selecting a Start and Stop Time 1 Using the Shuttle to navigate highlight the TIME parameter then press the Enter button The unit will enter Edit mode 2 Use the Jog to change the start and stop time values Use the Shuttle to navigate among the different parameters 3 To activate the start or stop time parameter use the Jog to place an X in the check box Kalatel DSR 1000eZ 2 4 0150 0238B 4 Press the Enter button at any time to exit Edit mode Selecting Cameras to Search 1 Using the Shuttle to navigate highlight the CAMERA parameter then press the Enter button The unit will enter Edit mode Use the Shuttle to navigate among the different cameras Use the Jog to select a camera or cameras by placing an X in the check box Press the Enter button at any time to exit Edit mode Searching for Recorded Alarms 1 Using the Shuttle to navigate highlight the ALARM parameter then press the Enter button The unit will enter Edit mode 2 Use the Jog to activate the alarms search by placing an X in the check box 3 Press the Enter button at any time to exit Edit mode Starting the Search Using the Shuttle to navigate highlight the START SEARCH parameter then press the Enter button The Search Results menu will appear Search Results Start Date Start Time Days HH MM SS 000 01 21 20
35. dials is used for single frame advance while in Pause mode it is also used to change the value of a parameter while in the menu system The Shuttle the outer of the two dials is used to Fast Forward and Rewind while in the Play mode 0150 0238B 1 3 Kalatel DSR 1000eZ 1 7 Back Panel Connections Figure 1 3 Back Panel VIDEO 1 WO Port For connecting peripheral devices such as alarm devices alarm relays or the VEXT connection 2 RS 232 Serial Port Serial port for Flash Upgrading of software Also for external control of unit Ethernet Port Optional For viewing Live or Recorded images on a PC via the Ethernet Power Connector Connect 12 Volt DC external power supply SCSI Port For connecting an SCSI compatible archive device Audio In Optional RCA jack 315mV 40k Ohms Unbalanced Audio Out Optional RCA jack 315mV 600 Ohms Unbalanced 7 Video In Composite video input with BNC style connector oan PF a Video Out Composite video output with BNC style connector Ethernet Port Ethernet models only The cable connection configuration depends on your Wire Type CAT5 network configuration Connector Type RJ 45 e Fora DSR 1000eZ that connects directly to a f Hub use a Straight Through connection Max Cable Length 100 feet 30 5 meters e Fora DSR 1000eZ that connects direc
36. ds Pictures Per Second NTSC 60 30 20 10 5 3 2 1 0 5 0 2 0 1 0 0 5p PAL 50 25 17 10 5 3 2 1 0 5 0 2 0 1 0 0 When the Normal Record Speed is set to 0 0 the unit will only record while an alarm is active Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes o Main Menu Record Settings Alarm Record Speed Use the Jog to select the desired Alarm Record Speed Alarm Record Speeds NTSC 60 30 20 10 5 3 2 1 0 5 0 2 0 1 PAL 50 25 17 10 5 3 2 1 0 5 0 2 0 1 Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes Pictures Per Second 0150 0238B 4 7 Kalatel DSR 1000eZ o Main Menu Record Settings Video Quality Use the Jog to select the desired Record Quality Select High Med Standard Or Custom Record Quality Higher record qualities use lower compression requiring more Select Quality disk space Selecting Custom allows you to set a custom file size from 13 0k to 33k Press the Enter button to confirm the selection and exit the menu OR Select Filesize Press the Menu button to exit the menu without making changes 33 0 kBytes Note The option to select a Custom file size is only available when the Multiplexer Format is set to None Multiplexer Format is located in the Advanced Me
37. e original suppliers invoice Failure to comply with these instructions will delay service of the unit and may result in the unit not being accepted by the Repair Center Factory Address GE Interlogix Attention Repair Center 3050 Red Hill ave Costa Mesa CA 92626 United States of America Telephone 800 343 3358 7 00 AM to 4 30 PM Pacific Time In Oregon 541 754 9133 Fax 541 754 7162 24 hours a day For warranty information see the following page 0150 0238B 10 1 Kalatel DSR 1000eZ 10 2 Warranty and Return Information GE Interlogix warrants all of its equipment for three years from the date of purchase This warranty covers any defects in materials and workmanship Equipment failures that are due to improper installation modification abuse or acts of nature will not be covered by this warranty The repair department will evaluate all equipment returned for repair to determine warranty coverage The Tech Support Manager will resolve any questions that may arise during evaluation to make a final determination Note The three year warranty does not apply to the following products MobileView and the monitor CRT which carry a 12 month warranty from the date of purchase The warranty specifically covers any defects in material and workmanship and does not cover equipment that has been abused damaged or modified For all warranty repairs GE Interlogix will cover all costs including parts labor and shipping Repair
38. e DSR 1000eZ sends a VEXT pulse to the Multiplexer CUTAN GOE SUMA Max indicating that it is ready to record the next image The Multiplexer responds by sending the next image to the Video Input on the DSR 1000eZ ee The VEXT connection is especially beneficial for units configured with dual record speeds Normal and Alarm Short Circuit Protected Use of the VEXT connection is Highly Recommended when connecting the unit to a multiplexer 0150 0238B 1 7 Kalatel DSR 1000eZ Error Out The Error Out signal is activated when the unit experiences any Output Open Collector operational or internal error High Transistor Off Low Transistor On Active When On Current Out 10mA Max Minimum Duration 0 5 Seconds Videoloss Out The Videoloss Out signal is activated when the unit experiences Output Open Collector videoloss on the selected video input Composite or SVHS High Transistor Off 3 f iy Low Transistor On In the event of videoloss VIDEOLOSS Will be indicated near the Active When On upper left hand corner of the primary monitor Current Out 10mA Max Minimum Duration 0 5 Seconds Disk End Out The Disk End Out is activated when there is 5 minutes of Output Open Collector recording space left on the hard disk It will also be activated if a High Transistor Off DAT or AIT tape archiving device is connected and the tape Low Transistor On end is encountered The DSR 1000eZ must be in Record mode Act
39. e changes and Exit the menu Use the Jog to select OK then press the Enter button OR 5 To Exit the menu without making changes Use the Jog to select CANCEL then press the Enter button o Main Menu Time Date Set Date To set the Date Date Setup 1 With MM DD YY DAY highlighted press the Enter button The highlighting will move to the row of numbers 2 Enter the date in Months Days Years Day of the Week will update automatically Use the Jog to change the values Use the Shuttle to navigate among the three fields 12 17 00 SUN CANCEL OK Press the Enter button to confirm the selection To Save the changes and Exit the menu Use the Jog to select OK then press the Enter button OR 5 To Exit the menu without making changes Use the Jog to select CANCEL then press the Enter button 0150 0238B 1 9 Kalatel DSR 1000eZ 1 10 Setting the Alarms o Main Menu Alarms e Whether an alarm condition will be activated when the Hardwire Alarm SUNG unit detects a signal on the Alarm In connection Teletext Alarm Disable e Whether a teletext alarm signal generated by a EE multiplexer or other device will cause the unit to CANCEL OK activate an alarm condition e Whether the internal buzzer is activated during an alarm condition To configure the alarm settings Alarm Settings 1 Use the Shuttle to navigate among the fields EE EE E 2 Use the Jog to change the valu
40. e unit is recording The unit will continue recording while the menu system is active Alarm Recording When an alarm condition is detected the unit automatically switches to the BE alarm record speed The alarm condition is indicated in several ways ALARM e With the word ALARM displayed on the primary monitor near the Alarm Indicator upper left hand corner of the screen e With the internal buzzer if activated in the menu system For information about activating the internal buzzer during alarms see Main Menu Alarms on page 4 3 of the Operator programming section of this manual e Byan external device connected to the alarm output of the unit if the unit is installed that way The alarm record speed cannot be changed using the Up Down Record Speed buttons on the front panel The alarm record speed must be changed in the menu system For information about altering the alarm record speed see Main Menu Record Settings Alarm Record Speed on page 4 7 of the Operator Programming section of this manual The unit returns to the normal record speed when the alarm condition ends 0150 0238B 2 1 Kalatel DSR 1000eZ Disk Nearly Full Notification This message will appear on the primary monitor to Disk Full Recording Has Stopped indicate that the unit has stopped recording because the disk is full In No Overwrite mode The user must acknowledge LOK the on screen message by pressing the Enter button Unit w
41. ed equipment will be returned via the same method of shipment in which it was received If a customer requests a faster return shipment the difference will be charged For all non warranty repairs the customer will be billed for parts labor and shipping Labor will be billed in half hour increments Note Customers requesting an estimate prior to repair will be notified by phone If they cannot be reached they will be notified by fax If we are unable to reach the contact person for repair authorization after one phone attempt and two fax attempts the equipment will be returned without being repaired We will hold equipment no longer than two weeks Advance Replacement Policy When an advance replacement is required we will send the customer replacement equipment from our stock and receive the returned product in exchange The received equipment will be evaluated and the repair department will determine whether it is a warranty replacement If it is non warranty see our repair policy above for details The following guidelines will be used for all advance replacements e Fewer than 45 days from purchase GE Interlogix will replace the product with new equipment e From 45 days to 1 year from purchase GE Interlogix will replace the product with refurbished equipment e From 1 year to 3 years from purchase the product must be sent in for repair Advance replacements will be sent for a fee of 100 If you have questions about this polic
42. es of the highlighted Teletext Alarm Disable fields Alarm Buzzer Enable 3 To Save the changes and Exit the menu Use the CANCEL 03 Jog to select OK then press the Enter button OR 4 To Exit the menu without making changes Use the Jog to select CANCEL then press the Enter button Kalatel DSR 1000eZ 1 10 0150 0238B 2 USER OPERATIONS 2 1 Recording To begin recording press the Record button RECORD will be indicated for RECORD three seconds near the upper left hand corner of the primary monitor The O unit always starts recording at the end of the previously recorded data Recording will continue until e Another mode is selected Play mode Reverse Play or Stop mode Record button e The disk is full In No Overwrite and Overwrite Once modes See section 5 1 Advanced Menu Disk Overwrite Mode on page 5 1 for details regarding Disk Overwrite modes Normal Recording The unit records at the normal record speed until an alarm condition is detected VAN The normal record speed is indicated on the monitor if the display option is enabled and can be altered using the Up Down Record Speed buttons or in the menu REC PLAY system SPEED For information about altering the normal record speed from the menu system see V Main Menu Record Settings Normal Record Speed on page 4 7 of the Operator Programming section of this manual paene Speed uttons The normal record speed can be altered while th
43. he network IP Address Subnet Mask Gateway Consult with a qualified Network Administrator or an MIS professional to configure these settings if DHCP is not enabled Primary Name Server Backup Name Server The IP addresses of the Primary and Backup Name Servers Not required if DHCP is enabled Print Server Enter the Print Servers IP address to enable the Print Image operation Function and Zoom TCP MTU Size Select from Standard 1400 and 1200 The MTU describes the maximum possible TCP packet size Standard 1500 is optimal for most ethernet network environments Ethernet Settings Hostname V201F04310209 Ethernet DHCP Disable Name Service Disable IP Address Si 18 Subnet Mask 225572557 Gateway 3 18 Primary Name Server So all Backup Name Server 3 18 TCP MTU Size Standard CANCEL OK How the unit handles an Ethernet session At the start of an Ethernet session the unit locks out its own front panel and disables all RS 232 and RS 485 communications During the Ethernet session the unit can only be accessed remotely using the WaveReader software When the Ethernet session ends the unit re enables the RS 232 and RS 485 communications and unlocks the front panel Playback stops when an Ethernet session is started Playback will not be re activated automatically when the Ethernet session ends o Advanced Menu gt Communications Modem Settings The default modem string shown
44. he menu without making changes a Main Menu Display Settings Archive Status To display the archive status near the upper center of the screen on the primary monitor select ON The unit will display either ARCHIVE NOT CONNECTED ARCHIVE READY ARCHIVE NOT READY Use the Jog to select ON or OFF Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes o Main Menu Display Settings Last Alarm To display the time and date of the last alarm near the upper right hand corner of the primary monitor select On The unit will display NONE if there is no previous record of an alarm Use the Jog to select On or Off Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes a Main Menu gt Display Settings Playback Time Date To display the time and date the recording was made during playback select On The data is displayed near the upper right hand corner of the screen Use the Jog to select On or Off Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes 0150 0238B 4 9 Kalatel DSR 1000eZ o Main Menu Display Settings gt Record Playback Speed To display the Record Playback Speed near the upper right hand corner of the primary monitor select On
45. he password see section 4 7 Main Menu Advanced Menu on page 4 15 A password is also provided to return the unit to the factory defaults For instructions on returning the unit to the factory defaults see section 5 8 Advanced Menu Factory Settings on page 5 8 Kalatel DSR 1000eZ 1 2 0150 0238B 1 6 Front Panel Controls Figure 1 2 Front Panel DSR 1000eZ RECORD REVERSE PLAY STOP PLAY PAUSE SEARCH OADPMO Record button Press this button to begin recording Reverse play button Press this button to playback video in reverse at the normal record speed Stop button Press this button to stop Recording or Playback Play Forward button Press this button to playback video at the normal record speed Pause button Press this button to pause playback Search button Press this button to enter the Search Filters menu NO pm P WO N Increase and Decrease Record Speed buttons Press these buttons to increase or decrease the Record or Playback speed 8 Combination Menu and Enter button Press the lower half of the button the Menu button to enter the Menu system Also used to move to higher level menus while in the menu system OR Press the upper half of the button the Enter button to make or confirm a selection in the menu system 9 Power On Indicator and Alarm Indicator Indicates power and an alarm indication when their respective LED s are lit 10 Jog Shuttle The Jog the inner of the two
46. he unit detects an alarm condition e The recorded picture quality o Main Menu Display Settings Use this menu to specify what status information will be displayed on Current Time Date the primary monitor Select On or Off for the following items Record Capacity e The current time and date ARENG SEAE Last Alarm e The remaining amount of time before the hard disk runs out of record space Record Playback Speed e The Archive Status Playback Time Date e The time and date of the last alarm e The current record playback speed e During Playback the time and date the recording was made 0150 0238B 3 3 Kalatel DSR 1000eZ o Main Menu Archive Setup Use this menu to Selective archive e Select data to be archived and begin archiving process EE Background archive Restore data from archive device Quickwave Setup e Enable background archiving Pence Sea are e Enable or Disable QuickWave Setup Sere EE e Specify how the unit will handle overwrite issues when the archive medium becomes full e Erase the archived data Main Menu Advanced Menu To access the Advanced menu 1 Select ADVANCED MENU from the Main menu then press the Enter button The Password Box will Please Enter The Password appear aaa 2 Enter the Advanced menu password Use the Jog to select a character then use the Enter button to complete the selection and move to the next character 3
47. ill not record over previously recorded data To continue recording the data must be erased or deleted in the Advanced Disk Maintenance menu In Overwrite Once mode The user must acknowledge the on screen message by pressing the Enter button The unit will continue recording again when the user presses the Record button 2 2 Playback Play Forward To begin normal playback press the Play Forward button The unit will begin PLAY playing back data from the beginning of the last recording session O Playback is indicated e As PLAY near the upper left hand corner of the primary monitor for three seconds Play Forward button Reverse Play To begin reverse playback press the Reverse play button The unit will begin REVERSE PLAY playing back data from the beginning of the last recording session O Reverse playback is indicated e AS REVERSE PLAY near the upper left hand corner of the primary monitor for three seconds ma pi Ban Os Reverse play If there is only one recording session on the hard disk the unit will indicate START button OF DATA on the primary monitor Playback Speed The unit will playback the data at the rate it was recorded The user can alter the A playback speed using the Up Down Record Speed buttons Altering the playback speed overrides any change in playback speed that would N occur due to an alarm condition in the playback To clear the override press the Stop button then press the Play button to resume
48. ite Once Continuous Overwrite e Continuous Overwrite o Advanced Menu Disk Maintenance The user can have previously recorded information Delete Undelete Erase e Deleted with the possibility of restoring it e Undeleted restored if it has not yet been overwritten e Erased removed with no possibility of restoring it Selecting erase will display the following warning box All data will be permanently erased Do You want to continue CANCEL OK 0150 0238B 3 5 Kalatel DSR 1000eZ o Advanced Menu Audio Record Setting Audio equipped model only Use this menu to e Enable or Disable the audio recording capability of the DSR Audio Limitations To record audio at least one the unit s video inputs must be set to record video at a rate of 1pps or faster o Advanced Menu Auto Delete Mode Use this menu to program the Auto Delete Mode The options available are from 7 to 99 days and Off 30 days is the default setting ADM Setting ADM will change Are you sure Yes a Advanced Menu Communications Use thus menu to specify Baud Rate The data transfer rate for the RS 232 serial port E Modem Settings eThe units Ethernet network connection settings Ethernet option only eThe Modem connection settings Kalatel DSR 1000eZ 3 6 0150 0238B o Advanced Menu Multiplexer Format The DSR 1000eZ is compatible with several different brands of multiplexers Use N
49. ive When On with Background Archiving ON and set to Continuous Overwrite Current Out 10mA Max mode Minimum Duration 0 5 Seconds 1 9 Setting the Time and Date It is recommended that as a minimum the following menu items be configured before using the unit For detailed information about using the menu system see section 3 o Main Menu Time Date Set Time Format To set the Time format use the Jog to select the desired Time format Time Format Setup Format the time as either 12 HOUR Select Format 24 HOUR Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes Kalatel DSR 1000eZ 1 8 0150 0238B o Main Menu Time Date Set Date Format To set the Date format use the Jog to select the desired Date format Date Format Setup Format the Date as either Select Format DD MM YY MM DD YY e YY MM DD Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes o Main Menu Time Date Set Time 1 With HH MM Ss highlighted press the Enter button The highlighting will move to the row of numbers 2 Enter the time in Hours Minutes and Seconds Use the Jog to change the values Use the Shuttle to navigate among the three fields 03 05 53 CANCEL OK Press the Enter button to confirm the selection To Save th
50. l Ethernet option only e Archiving Addendum 1 4 Installation Environment Power Ensure that the site s AC power is stable and within the rated voltage of the external power supply If the site s AC power is likely to have spikes or power dips use power line conditioning or an Uninterruptable Power Supply UPS Ventilation Install the unit in a well ventilated area Take note of the locations of the cooling vents in the unit s enclosure and ensure that they are not obstructed Temperature Observe the unit s ambient temperature specifications when choosing a location space Extremes of heat or cold beyond the specified operating temperature limits may cause the unit to fail Do not install the unit on top of other hot equipment Moisture Do not expose the unit to rain or moisture Moisture can damage the internal components Do not install this unit near sources of water Chassis You can place other equipment on top of the unit if it weighs less than 35 pounds 1 5 Passwords Figure 1 1 Passwords Advanced Menu Provides access to the Advances menu for the Yes See page 5 9 3477 E installer Restores the unit to the A password is provided to limit access to the Advanced menu It is recommended that the default password be changed after installation is complete As a security measure store the password in the administrator s secured files or in a limited access area For instructions on entering the Advanced menu with t
51. lable when archiving to a CD R device When the unit is finished erasing the data this message box will appear Press the Enter button to acknowledge the message and i 7 complete the deleting process Archive medium erased 4 7 Main Menu Advanced Menu To access the Advanced menu 1 Select ADVANCED MENU from the Main menu then press the Enter button The Password Box will Please Enter The Password appear O 2 Enter the Advanced menu password Use the Jog to select a character then use the Enter button to complete the selection and move to the next character 3 Pressing the Enter button on the last character will complete the password selection and the unit will display the Advanced menu 0150 0238B 4 15 Kalatel DSR 1000eZ Kalatel DSR 1000eZ 4 16 0150 0238B 5 INSTALLER PROGRAMMING For security reasons a password is provided to limit access to the Advanced menu For instructions about entering the Advanced menu see section 4 7 Main Menu Advanced Menu on page 4 15 5 1 Advanced Menu Disk Overwrite Mode Use this menu to specify how the unit will handle disk overwrite Select Mode issues once the hard disk becomes full The unit handles disk overwrite issues in three ways No Overwrite Continuous Overwrite Overwrite Once e Continuous Overwrite o Advanced Menu Disk Overwrite Mode No Overwrite Functions of No Overwrite mode e Recording always starts at end of l
52. lues shown in hexadecimal 0150 0238B 7 1 Kalatel DSR 1000eZ Setting the Clock The following table shows the command sequence for setting the clock ES pin a RE EE RE EE Value sans ran pag pe ee Le ee Vave 2D WER paa gt SEN e This gray cells in the Value row of this table indicate the correct positions for each byte of data in the command string Place the hexadecimal value of the desired ASCII character into the command string Enter a two digit value for the Year Month Day Hour and Minute into the command string Each digit is a separate byte Use the last two digits of the year for the year value For example 2001 is entered as 01 Time is always designated in Military Time Example In this example 14 39 on December 25 2000 is used to demonstrate the Set Clock Command String Value Column desired Value command string CO vt oT Year Character gf oo low morin Characer1 mf to lo Month Character m fg lo Se Bay Characters ar Minute Character 2 Minute Character 2 The final Set Clock Command String for 14 39 in December 25 2000 would appear as follows CC AA vae 00 ao 20 so 00 2o an Command Value Kalatel DSR 1000eZ 7 2 0150 0238B ASCII Status Request Messages ASCII String Bytes in Hexadecimal Model Name Request S MLN E 02 4D 4C 4E 03 Software Version Number Request S SVN E 02 73 77 4E 03 Record Mode Status Request S RMS E 02 52
53. nu 4 5 Main Menu Display Settings Use this menu to specify what status information will be displayed on the Current Time Date primary monitor Select On or Off for the following items Record Capacity Archive Status Last Alarm e The current time and date e The remaining amount of time before the hard disk runs out of record space Playback Time Date e The Archive Status e The time and date of the last alarm e During Playback the time and date the recording was made a Main Menu gt Display Settings Current Time Date To display the current Time and Date near the upper right hand corner of the primary monitor select ON Use the Jog to select On or Off Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes Kalatel DSR 1000eZ 4 8 0150 0238B o Main Menu Display Settings Record Capacity Select ON to display the amount of time remaining before the hard disk runs out of record space The data is displayed near the upper left hand corner of the primary monitor The unit displays the Record Capacity with two measures of time and switches automatically depending on the amount of time remaining e Days and Hours e Hours and Minutes e Minutes and Seconds Use the Jog to select ON or OFF Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit t
54. o Main Menu Alarms Use this menu to specify Whether an alarm condition will be activated when the unit detects a signal on the Alarm In connection Whether a teletext alarm signal generated by a multiplexer or other device will cause the unit to activate an alarm condition Whether the internal buzzer is activated during an alarm condition Kalatel DSR 1000eZ 3 2 Time Date Time Date Menu button Time Date Alarm Timer Settings Record Settings Display Settings Archive Setup Advanced Menu About Format Format Region Network Time Protocol Alarm Buzzer CANCEL Alarm Settings Hardwire Alarm Teletext Alarm Enable Disable Enable OK 0150 0238B o Main Menu Timer Settings This menu allows the user to START STOP SPD pps QUALITY ON OFF program a timed recorded 31 Weg event Use this menu to specify oa oF e The date or days on MON FRI 09 which the recording SAT SUN 14 will occur MON SUN 02 e The start and stop zen time e The record speed e The record quality e Whether the event is enabled EDIT Mode Hit ENTER To Toggle EDIT Mode o Main Menu Record Settings Use this menu to specify Video Input Color Mono e Which video input on the back panel is activated Normal Record Speed e Color or Monochrome recording Alarm Record Speed e The record speed during Normal recording E e The record speed when t
55. on to exit the menu Restore Search Results Start Date Start Time Size MB 11 29 2000 10 00 04 279 x 11 29 2000 10 03 25 67 x Selected 383 MB Available on Target Medium 652 MB ENTER to play SEARCH to restore a Main Menu gt Archive Setup Background Archive With the Background Archiving Feature turned ON the unit archives recorded data automatically Data is recorded to both the hard disk and the archiving device simultaneously The unit cannot Background Archive when the unit is recording at its highest record speed Use the Jog to select ON of OFF Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making any changes a Main Menu 5 Archive Setup gt QuickWave Setup This feature provides the option of having the QuickWave software written to any CDs that are created This allows the CD to be read on any PC without installing software Select ON to enable OFF to disable Please see the WaveReader Manual that came with this unit for more information Kalatel DSR 1000eZ 4 14 0150 0238B o Main Menu Archive Setup Archive Overwrite Mode For future use only a Main Menu Archive Setup Erase Archive Medium To erase the archived data press the Enter button The Erasing Media progress bar will appear Press the Enter button to cancel archiving at any time CCU CANCEL This feature is not avai
56. one this menu to specify the Playback format of the multiplexer If the unit is not Kalatel connected to a multiplexer select NONE Robot Note The DSR 1000eZ can auto detect the camera type connected NTSC or DM PAL The Navco multiplexer is only available on NTSC units Certain menu items may be grayed out and unavailable under certain circumstances The Vista VLM is grayed on the menu to the right because the DSR 1000eZ has auto detected that an NTSC input signal is attached Sanyo Philips REO Navco ATV Philips Pelco ATV QSP Vista VLM QSI 1700 Diebold Panasonic o Advanced Menu Adjust Picture Use this menu to specify the Brightness Contrast and Saturation of the video input Brightness Adjustments made to the video input will alter the recorded image Contrast Saturation o Advanced Menu Front Panel Lock Use this menu to Lock or Unlock the front panel Unlock Keyboard Lock Keyboard o Advanced Menu Factory Settings Use this menu to enter the Factory Password and restore the unit to the factory defaults Please enter the Factory Password lp 9 o Advanced Menu Change Password Use this menu to change the Advanced Menu Password Enter a new Password 8 0150 0238B 3 7 Kalatel DSR 1000eZ o Advanced Menu Languages Use this menu to select the language the DSR will display French o Advanced Menu Firmware Upgrade Use this menu to Flash upgrade the DSR
57. playback at the speed the data AWA was recorded Record Speed buttons Kalatel DSR 1000eZ 2 2 0150 0238B Fast Forward During playback rotate the Shuttle clockwise to view the data at a Higher than normal rate Increasing the amount of rotation increases the rate of playback Fast Forward is indicated e AS FAST FORWARD near the upper left hand corner of the primary monitor for three seconds Rewind During playback rotate the Shuttle counter clockwise to view the data in reverse at a Higher than normal rate Increasing the amount of rotation increases the rate of playback Rewind is indicated e As REWIND near the upper left hand corner of the primary monitor for three seconds Pause During playback press the Pause button to pause playback and display a single frame on screen Pause is indicated e As PAUSE near the upper left hand corner of the primary monitor for three seconds Single Frame Advance amp Single Frame Rewind During Pause mode rotate the Jog dial to view the frame directly before or after the frame displayed on screen AutoPause During playback moving the Jog the inner dial in any direction will freeze playback Depress the Freeze or any Play button to continue playback Start of Data amp End of Data awe Jog Shuttle TEN Jog Shuttle PAUSE O Pause button a Jog Shuttle If the start or end of data is reached during playback START OF DATA or END OF D
58. r 0150 0238B 6 5 Kalatel DSR 1000eZ 3 Upgrade Microsoft Internet Explorer Fle Edt Wew Favorites Tools Help I o Q Ah o a a 3 SoH Back Forward Stop Refresh Home Search Favorites Histary Print address 6 http 18 18 172 109 upgrade ssi E eGo Google BbSearch web g Porn Chori blocked rz CI Pdoptions 2 Main WaveBrowser Configure Upgrade About Upgrade Upload a new binfile to the unit File to upload P Eng Bemattriplex_swi5 01 kalatellik Browse Send File lE Opening page http 3 18 172 109 upload flash Step 4 Navigate to the upgrade file using the Browse button or type in the correct path and filename Click on the Send File button Step 5 Click on the Confirm Button A progress bar will appear PLEASE WAIT FOR THE PROGRESS BAR TO FINISH THEN WAIT FOR CONFIRMATION Click on the Reboot button to restart the unit for changes to take effect If unsuccessful download the flash file again and retry the steps 1 6 Kalatel DSR 1000eZ 6 6 0150 0238B 7 RS 232 REMOTE PROTOCOL The RS 232 protocol command structure uses Start of Text S and End of Text E characters to identify the beginning and end of command sequences The DSR 1000eZ supports the following command sequences ASCII Command String se sso esso O Pass zm nn Rewa sawe O wees O Sr J sse esea OO ene zm enes me 1 smene nn C 11 1 BEE 7 77 Note All byte va
59. s e Robot e Pelco e Sanyo e Philips REO e ATV e ATV QSP e Vista VLM e QS1 1700 e Diebold e Panasonic Connecting to Dedicated Micros DM When connecting to a Dedicated Micros multiplexer e tis necessary to connect the alarm output of the Mux to the alarm input of the DSR 1000eZ as you would do when connecting the alarm input on standard time lapse VCR e lt is necessary to configure the Main Menu Alarms Hardwire Alarm as Enabled e lt is necessary to configure the Main Menu Alarms Teletext Alarm as Disable To configure the alarm settings Alarm Settings 1 Use the Shuttle to navigate among the fields EE enable 2 Use the Jog to change the values of the highlighted Teletext Alarm Disable fields Alarm Buzzer Enable 3 To Save the changes and Exit the menu Use the CANCEL B3 Jog to select OK then press the Enter button OR 4 To Exit the menu without making changes Use the Jog to select CANCEL then press the Enter button Kalatel DSR 1000eZ 4 4 0150 0238B 4 3 Main Menu Timer Settings This menu allows the user to START STOP SPD pps QUALITY ON OFF program a timed recorded event Use this menu to specify e The date or days on which the recording will occur e The start and stop time e The record speed e The record quality e Whether the event is enabled EDIT Mode Hit ENTER To Toggle EDIT Mode Creating a Timed Recording 1 Using the Jog Shu
60. s 4 1 4 1 Main Menu gt Time D le a u 4 1 4 2 Main Menu 5 Alarims ccccccececcccsesecenceseeeeeeneseseeseneeeeneeeeeonneeeesenseeeeeeeeeenees 4 4 4 3 Main Menu gt TimerseniNgS nma aa ABANGAN AASA AGA 4 5 4 4 Main Menu gt Record Settings nunuussnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 4 6 4 5 Main Menu Display SettingS ununnusnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 4 8 4 6 Main Menu 5 Archive Setup cccccecessseeeeeeeeeeeeeeeeseeeseeeeeeeeeeeesseennees 4 10 4 7 Main Menu Advanced Menu cceeeeeeeeeeeeeeeeeeseeeeeeeeeeeeeeeeeeeeeeeeeeeees 4 15 5 INSTALLER PROGRAMMING ccssccssseccsseeceseeceseecessecenseceseecesseceneeceneennees 5 1 5 1 Advanced Menu Disk Overwrite Mode ssesseeeeeeseeeeeeeeeeeeees 5 1 5 2 Advanced Menu Disk Maintenance kee 5 2 5 3 Advanced Menu Audio Record Setting uussuuununnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 5 3 5 4 Advanced Menu Auto Delete Mode ue 5 4 5 5 Advanced Menu Communications ee 5 4 5 6 Advanced Menu Multiplexer Format eececeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 5 7 5 7 Advanced Menu Adjust Picture uuuuunssssssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 5 7 5 8 Advanced Menu Front Panel Locke 5 8 5 9 Advanced Menu Factory SettinGS csccssseeeeceeeeeeeeeeeeeeeeeeeeeeeeeeeeeseeeeees 5 8 5 10 Advanced Menu
61. s of Continuous Overwrite mode e Recording always starts at end of last recording e The unit overwrites all previously recorded data e _ The unit overwrites new recorded data data from the current record session e Unit never stops recording e Record Capacity display will not count down Unit records over all recorded data p Continuous Overwrite Mode 5 2 Advanced Menu Disk Maintenance The user can have previously recorded information Delete Undelete Erase e Deleted with the possibility of restoring it e Undeleted restored if it has not yet been overwritten e Erased removed with no possibility of restoring it Kalatel DSR 1000eZ 5 2 0150 0238B o Advanced Menu Disk Maintenance Delete To begin deleting the disk use the Jog to select DELETE then press the Enter button The Deleting Disk menu will appear The unit will begin deleting the oldest recorded information immediately To stop the delete process select CANCEL by pressing the Enter Cea button Data that was deleted before CANCEL was selected will remain deleted unless UNDELETE is selected o Advanced Menu Disk Maintenance Undelete To restore information that was previously deleted use the Jog to select UNDELETE then press the Enter button mH 42 A 1 To stop the restore process select CANCEL by pressing the Enter button CANCEL a Advanced Menu Disk Maintenance Erase
62. sired Date format Format the Date as either DD MM YY Select Format MM DD YY e YY MM DD Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes 0150 0238B 4 1 Kalatel DSR 1000eZ o Main Menu Time Date Set Time 1 With HH MM SS highlighted press the Enter button The highlighting will move to the row of numbers 2 Enter the time in Hours Minutes and Seconds Use the Jog to change the values Use the Shuttle to navigate among the three fields Press the Enter button to confirm the selection 03 05 53 CANCEL OK To Save the changes and Exit the menu Use the Jog to select 0K then press the Enter button OR 5 To Exit the menu without making changes Use the Jog to select CANCEL then press the Enter button o Main Menu Time Date Set Date To set the Date Date Setup 1 Press the Enter button The highlighting will move to the row of numbers 2 Enter the date in Months Days Years Day of the Week will update automatically Use the Jog to change the values Use the Shuttle to navigate among the three fields Press the Enter button to confirm the selection To Save the changes and Exit the menu Use the Jog to select 0K then press the Enter button OR 5 To Exit the menu without making changes Use the Jog to select CANCEL then press the Enter button 12 17 00 SUN CA
63. straps etc to avoid damage to this unit or its internal components from electric discharge WARNING This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions in this manual may cause interference to radio communications It has been tested and found to comply with the limits for a Class A computing device pursuant to subpart J of part 15 of FCC rules which are designed to provide reasonable protection against such interference when operated in a commercial environment This equipment has also been tested and found to comply with the requirements for a CE Class A device and TUV safety standards Operation of this equipment in a residential area may cause interference in which case the user is required to take all measures that are necessary at the user s expense to correct the interference Kalatel DSR 1000eZ i 0150 0238B IMPORTANT INFORMATION Software and or firmware is furnished to the purchaser under a license for use on a single system Software and or firmware included with this equipment are the sole proprietary property of confidential to and copyrighted by GE Interlogix Corvallis Oregon USA The software firmware are not to be copied or disclosed in any manner without the express written consent of GE Interlogix All information and specifications furnished by GE Interlogix are believed to be accurate and reliable No responsibility is assumed
64. the Shuttle to navigate among the different cameras Use the Jog to select a camera or cameras by placing an X in the check box Press the Enter button at any time to exit Edit mode Searching for Recorded Alarms 1 Using the Shuttle to navigate highlight the ALARM parameter then press the Enter button The unit will enter Edit mode 2 Use the Jog to activate the alarms search by placing an X in the check box 3 Press the Enter button at any time to exit Edit mode 0150 0238B 4 11 Kalatel DSR 1000eZ Starting the Search Using the Shuttle to navigate highlight the START SEARCH parameter then press the Enter button The Archive Search Results menu will appear Archive Search Results Start Date Start Time Size MB 11 28 2000 17 52 14 26842 11 29 2000 09 35 20 2062 11 29 2000 10 00 04 278 x 11 29 2000 10 03 25 66 x Selected 383 MB Available on Target Medium 652 MB ENTER to play SEARCH to archive Selecting from the Archive Search Results 1 Use the Jog to navigate highlighting the recorded event you wish to select 2 Use the Shuttle to select a recorded event by placing an x in the check box Starting the Archive Process To begin archiving press the Search button The Archiving progress bar will appear Press the Enter button to cancel archiving at any time CC CANCEL When the unit is finished archiving this message box will appear Press the Enter bu
65. tings Use this menu to specify Video Input Color Mono e Which video input on the back panel is activated Normal Record Speed e Color or Monochrome recording Alarm Record Speed Video Quality e The record speed during Normal recording e The record speed when the unit detects an alarm condition e The recorded picture quality o Main Menu Record Settings Video Input To select a video input use the Jog select either COMPOSITE VIDEO or SVHS VIDEO SVHS Video Composite Video Video input with BNC style connector SVHS Video Y C video input with 4 pin mini DIN style connector Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes Kalatel DSR 1000eZ 4 6 0150 0238B A Caution Do not connect both video inputs at the same time o Main Menu Record Settings Color Mono This menu sets the recorded video to be in Color or Mono If you select auto default the Auto unit will auto detect color as before If you select mono it will force the recording into Mono monochrome All recorded and looped video will be monochrome Use the Jog to select Auto Of Mono Press the Enter button to confirm the selection and exit the menu OR Press the Menu button to exit the menu without making changes o Main Menu Record Settings Normal Record Speed Use the Jog to select the desired Normal Record Speed Normal Record Spee
66. tly to a Minimum Cable Length 6 feet 1 8 meters PC use a Cross over connection Hub Wiring Configuration Straight Through Consult with your MIS personnel for the specific type PC Wiring Configuration Cross Over of configuration See section 5 5 Advanced Menu Communications for information about configuring the ethernet settings in the menu system Kalatel DSR 1000eZ 1 4 0150 0238B RJ 45 Pin Configuration for Ethernet Port Not Connected re ref rm Not Connected EC Not Connected RJ 45 Connector on Back Panel Power Connector Power Supply Input Power Supply Output Voltage 120 to 240 Volt AC Voltage 12 Volt DC Tolerance 10 Power 35 Waitt Frequency 50 to 60 Hz Connector 2 1mm barrel Center Positive SCSI Port The unit is equipped with a SCSI port for Connector 50 Pin High Density SCSI 2 connecting external archive devices The unit only supports a single SCSI device The SCSI ID must Gender on unit Female be set to 0 Compatible devices DAT AIT CD R CD RW The SCSI bus must be terminated otherwise the Autoloader Support No system will not operate properly SCSI ID 0 Additional menu setup may be necessary to configure archive device See section 4 6 Main Menu Archive Setup RS 232 Serial Port Use a Null Modem cable when connecting to a Connector Type DB 9 PC When connecting to a multiplexer it may sgt be necessary to construct a cable using the pin Sender tonnie
67. ttle to navigate highlight the DATE parameter of the last line item indicated with double dash marks 2 Press the Enter button to enter the Edit mode EDIT MODE will appear on screen in the lower left hand corner of the Timer Settings menu The user may press the Enter button to exit Edit mode at any time 3 Use the Jog to change the values of the DATE setting Date Day of the Month 1 through 31 Day of the Week Monday through Sunday Range of Days All Weekdays Monday Friday All Weekend Days Saturday Sunday Monday Sunday Everyday 4 When finished entering the Date use the Shuttle to navigate the START setting 5 Use the Jog Shuttle to enter the time the recording will begin The Hours and Minutes are edited separately The start and stop times are always configured in a 24 hour clock When finished entering the start time use the Shuttle to navigate to the STOP setting 6 Use the Jog Shuttle to enter the time the recording will end Entering a time before the start time will cause the unit to record until the indicated stop time on the next day When finished entering the stop time use the Shuttle to navigate to the SPD setting 7 Use the Jog to enter the record speed in pictures per second NTSC Record Speeds 60 30 20 10 5 3 2 1 0 5 0 2 0 1 0 0 PAL Record Speeds 50 25 17 10 5 3 2 1 0 5 0 2 0 1 0 0 8 When finished entering the Record Speed use the Shuttle to navigate to the Q
68. tton to acknowledge the message and complete E the archiving process Archiving completed a Main Menu 5 Archive Setup Restore From Archive The DSR 1000eZ supports data restoration to the hard disk from an archive device Data may be restored from a DAT AIT RAID or DVSe See the Archiving Addendum for details about using archive devices The DSR 1000eZ does allow the user to search the archived data for recorded events such as an alarm condition or a previous recording session Kalatel DSR 1000eZ 4 12 0150 0238B Use this to specify Restore Search Filters e The Start and Stop date of Start Stop the search DATE 12 25 00 01 01 01 e The Start and Stop time of MM DD YY MM DD YY the search SE sean e Which cameras to search TIME 11 11 21 12 34 34 exclusively e To search for recorded Ta 28 EST alarms CAMERA IL IL JI JI IL CANCEL START SEARCH Searching for All Recorded Events Using the Shuttle to navigate highlight START SEARCH then press the Enter button The Restore Search Results window will appear Specifying Search Parameters Selecting a Start and Stop Date 1 Using the Shuttle to navigate highlight the DATE parameter then press the Enter button The unit will enter Edit mode 2 Use the Jog to change the start and stop date values Use the Shuttle to navigate among the different parameters To activate the start or stop date parameter use the Jog to place an X in the che
69. y please contact the GE Interlogix RMA Department at 800 469 1676 Kalatel DSR 1000eZ 10 2 0150 0238B

Download Pdf Manuals

Related Search

Related Contents

User`s Manual for TR PGM    Downloads - Cincinnati Bell  IUL Flash & Go User Manual - Cole  Over the past few years, a lot of research has been done on volcanic  2 Appuyez sur - Alpine Europe  tQuest Primary Care User Guide  Guide de démarrage rapide  SISTEMA: INDIVIDUALES  

Copyright © All rights reserved. Failed to retrieve file