Home

Qosmotec Air Interface Simulator User Guide - iLab

1. http www qosmotec com User Guide lt 2005 gt Qosmotec Software Solutions GmbH UG 2005 290 R4 3 Qosmotec Air Interface Simulator User Guide lt 2005 gt Qosmotec Software Solutions GmbH QosmotecIM is a trademark of Qosmotec Software Solutions GmbH Germany All other registered trademarks or trademarks company brand or product names are the property of their respective owners Ownership by the respective holders is hereby recognized Throughout this documentation the use of registered trademarks or trademarks company brand or product names is for the purpose of reference only Every effort has been made to ensure that the information contained in this document is accurate at the time of printing However the software described in this document is subject to continuous development and improvement Qosmotec Software Solutions GmbH reserves the right to change the specification of the software Information in this document is subject to change without notice and does not represent a commitment on the part of Qosmotec Software Solutions GmbH Qosmotec Software Solutions GmbH makes no representations or warranties about the suitability of the Qosmotec Air Interface Simulator software either express or implied including but not limited to the implied warranties of merchantability fitness for a particular purpose or non infringement Qosmotec Air Interfa
2. 3 3 4 Move the cursor to the Trail Random area s RP to which the MG shall be connected When the RP of the trail or the random walk area turns red click left mouse button to connect the MG to the trail random walk area You can also connect a MG to a trail random walk area by dragging it directly from the MG pane onto a trail random walk area s RP To disconnect a MG from a trail random walk area select Disconnect from Trail Random walk area from MG menu The mobile group is disconnected but remains in it s current position until it is moved Locking Attenuations The user has the possibility to fix the attenuation values between a Mobile Group and a BTS Secior that is positioned in the scenery In this case the attenuation value will be set to the specified once and will not be modified by the AIS server according to the distance between Mobile Group and BTS Sector channel The Locking Value can be set individually for each BTS Sector channel in the configuration pane for a mobile group It can be selected from the available attenuation range Mobilegroup Mame MG 1 Connected to T rail 1 Position oe 200 meter ite li 198 meter BTS 7 Cha Unlocked Locked Sector Locked to 10 dB Sectore 2 Unlocked Sectors Unlocked Sector4 Urlocked Locked to 0 dB Locked to 1 dB Locked to 2 dB Locked to 3 dB Locking Attenuation values lt 2005 gt Qosmotec Software Solutio
3. Select a RWA and fill in new coordinates in any or all of the Left Bottom Right or Top input boxes in the configuration pane Random Area Hame Connected to Lett Bottom Right Top The configuration pane of RWA NOTE To alter size and or position of a RWA the RWA must NOT be connected with any mobile groups 3 5 2 2 Speed range in a random walk area To set the speed range for the mobile groups running through a RWA mark the RWA and fill in any value between 1km h and 500km h in the from and to input boxes in the speed field of the configuration pane Speed kmh From fi T To HE The speed field of the configuration pane of a RWA NOTE The minimum velocity must NOT exceed the maximum velocity 3 5 3 Delete Random Walk Area There are the following possibilities to delete a RWA Select a RWA and select Delete from map from the random area menu Select a RWA and select Objects gt Delete selected object from the menu bar or press del Select a RWA and select Objects gt Random walk area gt Delete from map from the menu bar lt 2005 gt Qosmotec Software Solutions GmbH Objects 47 3 6 Shaded area A shaded area is a rectangular area in the AIS GUI where the local attenuation is increased by a user specified amount e g to simulate tunnels bridges or radio shades of buildings In this section it will be explained how to Add a shaded area to ma
4. lt 2005 gt Qosmotec Software Solutions GmbH Objects 49 Select shaded area and fill in new coordinates in any or all of the Left Bottom Right or Top input boxes in the configuration pane M Shaded Area Mame Shodvea 1 Left 438 meter Bottom 776 met Righ 1051 meter Top 1260 meber BTS Secho Aien fo dE Sel for all The configuration pane of a shaded area 3 6 2 2 Set BTS Sector Attenuations The user may set a single attenuation within a shaded area for all BTS Sector channels in the scenery or set different attenuations for some or each of the BTS Sector channels in the scenery To define a single attenuation for every BTS Sector channel mark the shaded area and fill in a value between OdB and 95dB in the input box in the BTS Sector Attenuations field in the configuration pane and click on the set for all button next to the input box B75 Sechor 4thenuations dE Get for all 2 Secto 10 Secto 10 2 Secta 10 2 Secta 10 The BTS Sector Attenuations field in the configuration pane of a shaded area lt 2005 gt Qosmotec Software Solutions GmbH 50 Qosmotec Air Interface Simulator User Guide To modify the attenuation of selected BTS Sector channel Select the shaded area then double click on the attenuation column of the BTS Sector channel whose attenuation you want to change in the BTS Sector Attenuations field in the configuratio
5. lt 2005 gt Qosmotec Software Solutions GmbH 96 Qosmotec Air Interface Simulator User Guide 9 9 9 10 9 11 Mobile Group does not move on start Problem You press the global start button but your mobile group does not start to move Check the following Is the global start button active because another mobile group was ready for start Check if another mobile group started to move Is the mobile group allocated Only mobile groups reserved by the user can be started Is the mobile group connected to the trail or random walk area May be the mobile group icon simply overlaps with the reference point of the object If you can still move the mobile group with the mouse it is not connected to any trail or random walk area If a mobile group can be started the Start entry in the mobile group menu becomes active so that it can also be started from there Attenuation values do not change during movement Problem The mobile group moves on a trail or random walk area but the attenuation values in the attenuation matrix view do not change Check the following Is the attenuation between mobile group and BTS Sector locked to a specific value In this case the locking value remains independant from the distance Is the mobile group moving in a big distance from the BTS Sector The attenuation in dB is a logarithmic value In close distance to the BTS Sector the 1dB steps are significantly
6. Forward Forward 100 km h Set forall Type field of the configuration pane of a trail with direction pick list To resolve a roundtrip select Resolve roundtrip from the trail menu or select from the menu bar Objects gt Trail gt Resolve as roundtrip 3 4 2 4 Specify velocity for whole trail and single segments To specify the velocity for a trail select a trail and fill in a value between 1km h and 500km h into the input box in the speed field in the configuration pane kmh Set for all Speed 150 The speed field in the configuration pane lt 2005 gt Qosmotec Software Solutions GmbH 44 Qosmotec Air Interface Simulator User Guide 3 4 3 3 5 3 5 1 To specify the velocity of a single segment of a trail select a trail double click with left mouse button on the speed input box of the segment whose velocity shall be altered in the speed field of the configuration pane and fill in a value between 1km h and 500km h The speed input boxes of the trail segments Delete trail There are the following possibilities to delete a Trail Select a trail and select Delete from map from the trail menu Select a trail and select Objects gt Delete selected object from the menu bar or press del Select a trail and select Objects gt Trail gt Delete from map from the menu bar Random Walk Area A Random Walk Area RWA Is a rectangular area in which an AIS mobile group may move
7. A user with administrator rights is allowed to change the name of the base station the frequency the radiation power and the electrical pre attenuation attenuation value that is added automatically and reduces the variable attenuation range An administrator can also allow that several channels of the same base station can be connected to different base station ports of the AIS hardware This can be realized by selecting one base station activating the Allow multichannel field and clicking the up button in to Number of channels field This accumulates the AIS base stations ports to one BTS see column Used ports The number of channels per BTS can be reduced by clicking the down button in the Number of channels field Note Increasing the number of channels for one BTS decreases the number of individual base stations Any change must be confirmed by pressing the Apply Button The user will be prompted for saving changes if he leaves this tab or closes the AIS Administration GUI Note A normal user is only allowed to read the settings but not to change the properties lt 2005 gt Qosmotec Software Solutions GmbH AIS Administration GUI 89 a User 8 BTS configuration ie Mobile configuration E Information PR Cope ETO multichannel Base station BTS 5 ector 1 i Running Number of channels Channel 1 s Frequency MHz 21 al Radiation power dBm 200 Pre Attenuation dB jo
8. Units Used ports Numbers of channels Unit type Name a 1 g logical BTS Sector 1 2 4 1 Unique BTS Sector 2 3 5 1 Unique BTS Sector 3 4 6 1 unigue BTS Sector 4 of Undo channel settings The Base Station Configuration tab of the AIS Administration GUI lf there is one AIS Port where no base station is connected to it is not necessary to delete the base station in the Admin GUI It can simply be set to inactive by unselecting the Running checkbox next to the base station name An inactive base station port is indicated as greyed out italic name in the BTS pane of AIS and cannot be used in a scenery blocked b QABTS Sector 2 BTS Sector 3 BTS Sector 4 BTS pane with BTS Sector 1 set to inactive 8 5 User Administration The User tab of the AIS Administration GUI lists all users and their execution rights that are allowed to log in into the AIS server A user with administrator rights is allowed to add or remove users or to change the execution rights Admin Normal of existing users Any change must be confirmed by pressing the Apply Button The user will be prompted for saving changes if he leaves this tab or closes the AIS Administration GUI Note A normal user is only allowed to read the settings but not to change the properties lt 2005 gt Qosmotec Software Solutions GmbH 90 Qosmotec Air Interface Simulator User Guide 8 6 Ta User Es BTS configuration if Mobile confi
9. 10 000 log entries or not before the user is able to work with the scenery ee ai esis x 2 The number of log entries For this scenery is greater then 10000 286173 We recommend to load only the last 10000 E entries Do you want to load the last 10000 entries wn The load log entries dialog Note lt 2005 gt Qosmotec Software Solutions GmbH Getting started 19 2 5 3 2 5 4 2 5 9 When a scenery is already open and you try to open another scenery AIS will try to start another instance of AIS You can only open as many sceneries as you own licenses Save scenery To save a scenery select from the menu bar File gt Save Scenery or press Ctrl S If the scenery has been saved before the current scenery will be overwritten If the scenery has not been saved yet the Save scenery window appears Fill in a name in the name input box and click Save The user may also write a short comment about the scenery in the comment input box of the Save scenery window before saving All sceneries are saved in the database If a scenery shall be saved under a new name select from the menu bar File gt Save Scenery As The Save scenery window appears Fill in a name in the name input box and click Save Lave aenery 3j Tate The save scenery dialog Close scenery To close a scenery select from the menu bar File gt Close Scenery The user is prompted to save the scenery bef
10. 220 volts are provided Each mobile connector is internally linked to each base station connector via a separate semiconductor attenuator which can be addressed and controlled individually The network connection allows connecting remote terminals to the attenuator hardware and controlling the hardware via GUI clients Air Interface Simulator Subrack The AIS is equipped with an internal CPU The CPU is a standard industrial PC compatible microcontroller board with connectors for external data networks and a bus for internal access of the attenuator modules The CPU runs the software that drives the attenuators and the server process which provides a set of functions to operate the attenuators from remote clients The attenuator modules The AIS hardware furthermore encloses a number of so called 2x2 Attenuator Modules that each contain 4 semiconductor attenuators with a response time of 8 us lt 2005 gt Qosmotec Software Solutions GmbH Introduction to AIS 7 Each attenuator module links 2 base stations with 2 mobiles so that each mobile is connected via an individually controllable link to each base station Four attenuator modules are cascaded into a basic 4x4 configuration interconnecting 4 mobiles with 4 base stations 292 Attenuator Module 4x4 Subrack Internal Architecture of the AIS Hardware Each attenuator assembly contains either 16 GSM GRPS attenuators or 16 UMTS attenuators These 16 attenuato
11. The table graph pane The user can toggle between displaying the attenuation values that are set by the AIS server and the actual Rx Levels that are received by the connected mobiles in the graph For this select View gt RxLevel Values or View gt Attenuation Values respectively or click the Att RxLevel Button from the graph view toolbar This does not apply for the table text pane that only shows the attenuation values In order to show the correct Rx Level values it is necessary that the AIS server is correctly calibrated Note The Table file should describe a period of at least 1000 ms The application works also with smaller time periods but the displayed graphic in the table graph pane has a very bad resolution 6 6 Running table files Specify the number of repetitions Either select a number of repetitions from the selection box in the table file settings bar or in case the table file shall be repeated until it is stopped by the user tick infinite box in the table file settings bar lt 2005 gt Qosmotec Software Solutions GmbH 80 Qosmotec Air Interface Simulator User Guide Make sure that the involved MGs are not allocated on the scenery window The MGs involved will be allocated at start time and remain allocated until the table file execution is stopped Repeiions P E Infinite The table file settings bar Start table file Either click on the Start button e in the tool bar or select Edit
12. cccseccceceeeseseeeeseeeeeeeeeeeeeeeeseeeeneeseeseees 56 Delete fast fading area from MAP s ssssssuussnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nnmnnn nnmnnn nnmnnn nmmn 56 o MOOO AICI ara E RA 56 Add indor area 10 Map cresine nes Seesceaeedsecdedeuss ccvdecscasedanssiccwvatanadvdexeuaanvensencedensssanvedersaderseen 57 COMMOUES IIVGO OK CNC aa a 58 Size and position of an indoor ANCA s ccccsssececastcmeinensenicaetiensGcehssnsnnatdenbnehbceanestunstionsdandnaktenetnabbaaewnchieastenncieweie 58 Serwa aneno eaea E E E E 60 Set indoor reception 3 Nees tener erent Seen ne enemies TNE NR ee ee een nee ee eee ae neces 61 Show or hide connection between indoor area and BTS Sector channel ccccccceeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 62 Delete indoor area from Map sensiecessceede cca ciice cece ssctaternweccaensattensiaentonciaitinasvieetousuiectnuivkseelouskioedsessaceloarnieedsukbneeloaswast 62 indoor area USG CASOS oirrc a E 63 Part IV Running sceneries 65 BS AAU INS sissa EE A a a 65 Stari SSS SEO ce aes cca ta ce ee E EDERA Eai EEA crew E emer meet aA aaa EATERS 65 3 VIEWING the attenuation data iicsiedecciicatectesacdedcesceveccestadeiesccasespesacdctcactieceasceindvedcadeeyecoedsdusaceeestesnes 66 Attenuation RxLevel matrix VIEW cssccesssasccnseccnscisccanscies ondiiesccsaetse conieteasenactcsconscnosanaenceconacnaesanacneeccueseaqacsaniiecceeceace 67 SCENery LoggiNng VIEW sessirnir aaas aE aeara Eas aa eaaa
13. change the visibility of the configuration panes ls any mobile group connected to or running on the trail or random walk area The properties can only be edited if the object is free Have you clicked Enter or anywhere into the scenery window to apply the change This must be done to activate the setting 9 7 No attenuation shown in the attenuation matrix Problem A mobile group is positioned on the scenery window but there is no attenuation value displayed in the attenuation matrix view Check the following Is the mobile group allocated Attenuation values are only set for mobile groups reserved for the specific user ls a BTS Sector positioned on the scenery window Attenuations are calculated according to the distance between mobile group and BTS Sector 9 8 Start button does not become active Problem You want to start a mobile group on a trail or random walk area but the global start button is inactive Check the following Is the mobile group allocated Only mobile groups reserved by the user can be started Is the mobile group connected to the trail or random walk area May be the mobile group icon simply overlaps with the reference point of the object If you can still move the mobile group with the mouse it is not connected to any trail or random walk area If a mobile group can be started the Start entry in the mobile group menu becomes active so that it can also be started from there
14. moving through such an area experience a profile dependent fast fading effect In this section it will be explained how to Add a new fast fading area to map Configure a fast fading area Show or hide connection between FFA and BTS Sector channel Delete fast fading area from map 3 7 1 Add new fast fading area to map There are the following possibilities to add a FFA to the map Select Objects gt Fast Fading area gt Add to map from the menu bar Click on the add new fast fading area button m in tool bar lt 2005 gt Qosmotec Software Solutions GmbH 52 Qosmotec Air Interface Simulator User Guide 3 7 2 3 7 2 1 After executing one of these procedures click on the map in the AIS GUI at the place where you want to locate the new FFA Hold left mouse button and drag to set the size of the new FFA Len are meted Ton fio rates BT Sector Fact ect F Fast fading area in the scenery map Configure fast fading area The user can configure the following parameters of a FFA Size and position The Fast Fading profile separately for each BTS Sector channel in the scenery Size and position of a fast fading area There are two ways to alter size and or position of a FFA Select a FFA and drag to the preferred size and or the preferred position Select a FFA and click on one of the sides of the FFA with left mouse button Hold the left mouse button and drag the side of the FFA t
15. 44 Direction of a roundtrip 43 Direction of the main beam 33 Disconnect mobile group from Random walk area 37 Disconnect mobile group from Trail 37 Dynamic Scenery Mode 71 Dynamic Scenery View 71 7 Exclusive BTS Sector reservation 27 F Fast fading area 51 52 53 56 Fast fading profiles 53 Fast Fading Type 53 Feature List 86 Frame windows 9 13 16 Frequency 32 Frequency 88 G Graph of fast fading 68 GUI licenses 86 H Hardware 5 6 8 9 Hide connection between fast fading area and BTS Sector 56 Hide connection between indoor area and BTS Sector 62 Hide connection between shaded area and BTS Sector 50 Hide reference points 23 Import Prediction Profile 81 Import table files to database 76 Indoor Area 56 57 58 60 61 62 63 Indoor area use cases 63 Indoor Reception Level 56 Interrupt a session 70 Interrupt table file execution 79 IP address 11 L Load BTS Pattern file to database 31 Locking value 38 Log data 68 Logging on to AIS 9 11 85 Main Beam 33 map left 16 map top 16 Maximal field strength view 83 Mobile Group Configuration 87 Mobile Group Names 87 Mobile group pane 35 36 Mobile groups 35 36 37 39 N Normal User 89 0 Objects 23 24 35 39 44 47 51 56 One way 42 Open AIS 9 11 Open scenery 18 Open table file 77 P Pause table file 79 Ports 11 lt 2005 gt Qosmotec Software Solutions GmbH 102 Qosmotec A
16. BTS Sector 3 Basestation position update 12 15 45 BTS Sector 3 Basestation frequency update 12 15 45 BTS Sector 4 Basestation position update 12 15 45 BTS Sector 4 Basestation Frequency update 12 15 45 Shaded area properties update 12 15 45 Fast Fading area properties update 12 15 45 siy g0Liezi 2 48 1 49 3 40 4 52 dB 12 15 45 fy 3301268 2 37 1 49 3 48 4 47 dB 12 15 45 siyir alozo 2 45 1 50 3 45 4 52 dB 12 15 45 fy LOSS1218 2 48 1 40 3 40 4 47 dB 12 15 45 lt PyGO L621 2 48 1 49 3 40 4 52 dob 12 15 45 fyi 3301268 2 37 1 49 3 48 4 47 dB 12 15 45 hyd 76 i626 2 45 1 50 3 45 4 52 dB 12 15 45 hy 1039 1218 2 48 1 40 3 40 4 47 dE 12 15 45 viy O55452 2 50 1 49 3 41 4 53 dB Position of MG in the map The Scenery Logging view window Attenuation of the MG to each BTS Sector in the scenery in dE To delete log entries activate either the Scenery Logging view window or the Attenuation RxLevel Matrix view window and stop the scenario Select Edit gt Textual Logging Delete log entries from the menu bar This action cannot be undone Logging into the Scenery Logging view can be disabled by selecting Edit gt Textual Logging Disable Logging from the menu bar Note The Scenery Logging View as well as the Attenuation RxLevel Matrix view only show the result of the free space path loss propagation model For performance as well as for data storage reasons fast fading val
17. BTS Sector channels To show or hide the connection lines click on the show hide connection Indoor area BTS button in the tool bar or select from the menu bar View gt Show Hide connection Indoor area BTS Delete indoor area from map There are the following possibilities to delete an indoor area Select an indoor area and select Delete from map from the indoor area menu Select an indoor area and select Objects gt Delete selected object from the menu bar or press del Select an indoor area and select Objects gt Indoor Area gt Delete from map from the menu bar lt 2005 gt Qosmotec Software Solutions GmbH Objects 63 3 8 5 Indoor area use cases lf a MG is inside an indoor area and a BTS Sector is outside the indoor area or vice versa the between the MG and the BTS is the sum of all wall attenuations between MG and BTS Sector plus the distance attenuation MG in indoor area and BTS Sector outside The attenuation is the sum of the wall attenuation plus the distance attenuation lt 2005 gt Qosmotec Software Solutions GmbH 64 Qosmotec Air Interface Simulator User Guide If a MG and a BTS Sector are in the same indoor area the attenuation between BTS Sector and MG is the indoor reception level of the indoor area 4 FATE T 1 I 1 I i I e 1 1 I I T BTS Sector and MG in the same indoor area If several indoor areas overlay
18. Mobilegroup gt allocate on server The allocating user is shown in the allocated by column of the mobile group pane Allocated mobile groups are unavailable and therefore greyed out in the mobile group pane for other users lt 2005 gt Qosmotec Software Solutions GmbH Objects 37 To release a MG on the server select the MG and select De allocate on server from the MG menu or select from the menu bar Objects gt Mobilegroup gt De allocate on server Oven a M Start Stop E Allocate on server De Allocate on server Delete From map _ Disconnect from railfRandom walk area Connect to Trail Random area Show graph of Fast Fading Mobile group menu of an allocated mobile group Mobile allocations can be cancelled by an AIS adminstrator 3 3 3 Connect MG to Trail Random walk area To connect a MG to a trail random walk area select the MG and select Connect to Trail Random area from the MG menu or select from the menu bar Objects gt Mobilegroup gt Connect to Trail Random area A small square now appears on the peak of the cursor Mame MG 1 Connected ta Poston 1680 meter Y 716 mete Akca on server Lii a ara mT SET Deia Mom map Disconnect Fron TreaelRuandonr wins ares ones bo TTAR area Mobile group menu lt 2005 gt Qosmotec Software Solutions GmbH 38 Qosmotec Air Interface Simulator User Guide
19. Step 1 of 16 basestations Bazestation 1 Measure BTS Power and enter the value Cancel Next gt Entering the BTS radiation power for calibration If the AIS system is equipped with a digital switch matrix for each base station and each switch matrix port that is served by the AIS server the reception power level on mobile group 1 needs to be measured This reception level needs to be entered in the AIS calibration setup wizzard If there is no switch matrix the signal level needs to be entered only once 415 calibration setup Step 1 of 16 basestations Array 1 of 4 Measure signalleyel at mobile group 1 and enter the value 5q dEr Cancel Next gt Entering Reception Power per switch matrix port for BTS 1 and MG 1 Finally the reception power level for every other mobile group needs to be measured when base station 1 is switched on each switch matrix port The reception level needs to be entered in the AIS calibration setup wizzard If there is no switch matrix the signal level on mobile group side needs to be measured for each mobile group to each base station instead lt 2005 gt Qosmotec Software Solutions GmbH 92 Qosmotec Air Interface Simulator User Guide 9 1 415 calibration setup Shep 2 2 of 6 mobile groups Array 1 of 4 Measure signalleyel at mobile group 2 and enter the value E dBm Cancel Next gt Entering Rece
20. both the BTS Sector and mobile the highest indoor reception level the lowest attenuation applies BTS Sector and MG overlayed by two different indoor areas lt 2005 gt Qosmotec Software Solutions GmbH Objects 65 4 1 4 2 Wall attenuations of indoor areas that include neither the mobile nor the BTS Sector are ignored even if the indoor area is located in between the mobile and the BTS Sector because the signal finds its way around or over the indoor area Te pe An indoor area between BTS Sector and mobile including neither Running sceneries This chapter gives a detailed overview how to run sceneries It will be explained here how to Prepare to run sceneries Start sessions View the attenuation data Break sessions Stop sessions Preparations To execute a scenario the following preconditions must be full filled The MGs that are to be started must be connected to a trail or a random walk area The MGs must be allocated on the server If the MGs are connected to a trail or a RWA and allocated on server the user may start the movement Start session There are the following possibilities to start a session Click on the start the session button ee in tool bar or select Edit gt Start session all lt 2005 gt Qosmotec Software Solutions GmbH 66 Qosmotec Air Interface Simulator User Guide 4 3 mobile groups from the menu bar This will automaticall
21. change their reception level Outside the indoor area the signals of the picocell are received with an extra attenuation due to the walls of the building called Wall Attenuation in AIS So if mobiles move outside the indoor area their attenuation will be calculated as normal attenuation through distance and the wall attenuation The same happens if a BTS is placed outside an indoor area and mobiles move inside it Thus their attenuation will also be calculated as normal attenuation through distance and wall attenuation lt 2005 gt Qosmotec Software Solutions GmbH Objects 57 3 8 1 The following issues are explained in this section Add a new indoor area to map Configure an indoor area Show or hide connection between indoor area and BTS Sector Delete an indoor area from map Indoor area use cases Add indoor area to map There are the following possibilities to add an indoor area to the map Select Objects gt indoor area gt Add to map from the menu bar Click on the add new indoor area button fat in the tool bar lt 2005 gt Qosmotec Software Solutions GmbH 58 Qosmotec Air Interface Simulator User Guide After executing one of these procedures click on the map in the AIS GUI at the place where you want to locate the new indoor area Hold left mouse button and drag to define the size of the new indoor area Eh Scenery ap View Botlom 572 fresh eel e
22. database unnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nnmnnn 77 Working with table files in AlS nnannnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nenna 77 RUNNING ADIE MOS tirano IE S EEE EEE AER 79 Prediction Profile View 80 Prediclhion Prole Mode sssrassisen ieseana a EEEa aE EAEE ri 81 Import Prediction Profiles aaasnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nnmnnn 81 Assigning Prediction Profiles to Base Stations cccccsssseeeeseesseeeeeeeesseeeseeensseeeseeenneeesseoenes 82 Changing Prediction Views sisisiirisiinniiiian niaaa aaa aaa a 83 RUNNING a SUP OU oei ances erates ecsbeetemnteteeeehed ences vena cbad waneizache senecenstassexveuatedsmausteneens 85 AIS Administration GUI 85 Open PCTS EAU oss sc sees eae EA AEE 85 AIS Setup PATON AG OM ioe cesists ee resewenseceesete nwcoedeceuncersswueesesusancerseustasdseunnvejocuntesssayensqcocesuesdunvsenevsuade 86 Mobile Configuration iiecscccwiedecicttneda ceeds iiawcventcavinncdestatiucdewsndi ieewaessusiweudetesveceteseeneiebaeweseeteiwtedeieavers 87 Base Station Configuration siicisiece st acecccerenensieecasctsvieee ccc acadeuensueseustcdenskaveuesczsnededsvarshedcasceanoedeueuersn 88 user PCLAW UO saci secs ees sates E avec asst erecctesSenseceses qeieewuoscense 89 OE i CANDINO ahs ce at te va nc ase ee cede et E viene uabeaernalieesuaucbhodenveatwosans 90 Trouble S
23. do the following Create virtual landscapes called sceneries populated with the base stations sectors and mobiles connected to the AIS hardware Move the mobiles across a scenery and monitor the changes in attenuation between the mobiles and the base stations sectors Display attenuation graphs from dial settings stored in a comma separated file More detailed information on these tasks is provided in the chapters Getting started Objects Running Sceneries and Table file view 1 2 7 Data Storage The sceneries and table files that are executed with AIS can be either stored in a local Access database file or in a central Oracle Database In case of a local data storage the saved sceneries and table files cannot be shared among users working on different client PCs To save the data in a central database that has to be delivered and installed separately by Qosmotec the Oracle 9i Database Release 2 9 2 0 1 Client for Windows 98 NT 2000 XP has to be installed on each client PC using AIS For installation details refer to the readme file that is delivered with the installation version The installation of the runtime version is sufficient to run AIS If the Oracle Client CD that is delivered by Qosmotec is used for the installation no configuration needs to be done after installation Otherwise refer to Qosmotec support for configuration details To ensure stability of the Oracle client it is recommended to install also the Oracle 9 2
24. in a given area To make a prediction profile available for AIS it has to be imported into the AIS Database From the Prediction Profiles View menu select File gt Import Prediction Profile Files into Database Select all files of 3ga format for import from the file system and press the Open button A progress bar indicates how far the import of a Prediction Profile File has proceeded To delete Prediction Profile Files from the Database select File gt Delete Prediction Profiles Select the files you want to delete by name and press the Delete button lt 2005 gt Qosmotec Software Solutions GmbH 82 Qosmotec Air Interface Simulator User Guide 7 3 Assigning Prediction Profiles to Base Stations To use a Prediction Profile for simulation it must be assigned to a Base Station In Prediction Profile View Base Stations cannot be dragged as in Scenery View Their position within the simulated area is determined by the prediction profile To use a Base Station for simulation select Use for predict simulation from the Base Station Context Menu that can be opened on right mouse click on the base station name in the BTS pane a BTS S Selene Exclusive Reservation ETS Sector 3 Use For predict simulation BTS Sector 4 The BTS context menu in Prediction Profile Mode BTS Sector used by blocked b lf the Base Station is in use it is printed in bold letters and the user name is
25. of serviceability In this section it will be explained how to Enter the table file mode Create csv table files Import table files to database Delete table files from database lt 2005 gt Qosmotec Software Solutions GmbH Table file view 75 Work with table files in the AIS Run table files 6 1 Table File Mode In order to enter the table file mode select File gt Switch to gt Table File Mode from the Scenery View menu To switch back to Scenery Mode select File gt Switch to gt Scenery Mode from the Table File menu Note Open Sceneries or Table Files have to be closed before leaving the respective mode 6 2 Creating csv table files Open Excel Specify the columns The columns must be named as follows Column A t Column B MG From column C on the columns must be named according to the BTS Sectors in ascending order e g BTS1 BTS2 BTS33 The user may also leave out some BIT S Sectors as long as an ascending order is kept e g BTS1 BTS3 BTS5 Fill the time stamps in ms in the of t column The first time stamp must be t 0 the difference between two subsequent time stamps must be at least 1 ms Fill the number of MG ID in the MG column Fill in a level of attenuation between OdB and 95dB in each of the BTS columns for every time stamp To keep the attenuation level for two or more time stamps fill in the same value at these time stamps Save file as csv f
26. smaller than in large distance Cannot see fast fading area graph Problem A mobile group has moved through a fast fading area but the attenuation graph view does not show fluctuating values Check the following Is the Fast Fading Effect button activated If this button is inactive only the distance dependant attenuation values are displayed in the attenuation graph lt 2005 gt Qosmotec Software Solutions GmbH Trouble Shooting 97 Has the mobile already left the fast fading area The fast fading values are only updated if the area is completely passed or if the mobile group has changed its direction within the area when moving through a random walk area Is the correct time window displayed Depending on the selected time resolution it might be necessary to scroll through the attenuation graph window to see the correct time window when the mobile group has passed the fast fading area 9 12 Cannot Open Table File Problem A table file cannot be opened in the AIS table file view Check the following Does it have the right format Are all values separated by commas or semicolons If the separator is not correct the following error message appears ars Error x AN Mo seperator Found 9 Wrong separator in table file Does it use an invalid Mobile Group If a mobile group outside the available range e g MG 5 for a 4x4 specification is specified the following error message appear
27. 0 6 Client Patch for Windows 98 NT 2000 XP after successful client installation For installation details refer to the readme file that is delivered with this patch 2 Getting started This chapter gives an overview how to start AIS and how to create and run sceneries It will be explained how to Install AIS Open AIS Log on to AIS Work with frame windows create and run sceneries lt 2005 gt Qosmotec Software Solutions GmbH 10 Qosmotec Air Interface Simulator User Guide 2 1 Install AIS The AIS server software and firmware is delivered by Qosmotec on a Compact Flash Card that is ready to run when inserted into the AIS subrack For this make sure that the AIS subrack is switched off and insert the Compact Flash into the slot in the back of the subrack For installing the AIS Client Software double click the setup exe and follow the steps in the Install Shield Wizzard If there is already an older version of AIS installed it shall be removed before installing a newer version For this select Remove in the Program Maintenance Window and continue ie Air Interface Simulator InstallShield Wizard Program Maintenance Modify repair or remove the program Change which program Features are installed This option displays the Custom Selection dialog in which you can change the way Features are installed Repair installation errors in the program This option Fixes missing or corrupt F
28. 3 0 43 Ta DA Mia 4 30 45 40 t I Attenuation in dB Mobile group name The attenuation data in the Attenuation Matrix view window The user can toggle between displaying the attenuation values that are set by the AIS server and the actual Rx Levels that are received by the connected mobiles For this select View gt RxLevel Values or View gt Attenuation Values respectively or click the Att RxLevel Button Li from the Matrix view toolbar In order to show the correct Rx Level values it is necessary that the AIS server is correctly calibrated Note The Scenery Logging View as well as the Attenuation RxLevel Matrix view only show the result of the free space path loss propagation model For performance as well as for data storage reasons fast fading values are not taken into consideration there lt 2005 gt Qosmotec Software Solutions GmbH 68 Qosmotec Air Interface Simulator User Guide 4 3 2 4 3 3 Scenery Logging view The Scenery Logging view window shows updates to the scenery the attenuation of each MG in the scenery to all the BTS Sectors in the scenery and the position of each mobile group The data is recorded every second Es scene Logging view EE BTS Sector 12 15 45 BTS Sector 2 Basestation position update 12 15 45 BTS Sector Basestation frequency update 12 15 45 BTS Sector 1 Basestation position update 12 15 45 BTS Sector 1 Basestation frequency update 12 15 45
29. 68 Atenualom RxLovel grapi ses cssncessnsencescccnnsysancensevencenessanceuss lt euntugs sentenesseacenpsscutowsescesnepyscntensesecceeeesantemsesaestepetceiewens 68 4 Break session caesar cc ee ete een wceantreepredeeeeteci meena ewe edcrtdt wine arntdiadtneaeac ea emauieanes enue abe cemeuiwemeummemenaauannaneds 70 lt 2005 gt Qosmotec Software Solutions GmbH Contents ll 5 Part V 2 3 4 Part VI 1 2 3 4 5 6 Part VII 1 2 3 4 5 Part VIII 1 2 3 4 5 6 Part IX f 2 3 4 5 6 T7 8 9 lOp SES SOE a E E E E E E E S 70 Dynamic Scenery View 11 Dynamic Scenery Mode nsaannnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nenen nnnnnn nnmnnn nnmnnn nnnm 71 BIS PON TESEN AHON oinin E sees cine ce ances se veace seen geteestennnoenes pues wousceneces 72 Switching exclusive BTS reservation cccccccsessseeeesseesseeeeeeensseeeeeeeesseeeeeoeenseeeseoesseeeseoeeneesssees 72 Running Sceneries in Dynamic Mode cccceeesseeeeeeeesseeeseceenseeeeeeeesseeeseoenseeeeeeesneeessooenseees 73 Table file view 74 WANS FUG OS co econo aac E awee susan EEES E 75 Creating csv table files sisciccictccicesecaucnelaieawcceecsavendedastsruecdaveet i duswcesersiwendsdeavecoeucasselobaawavivecisteceivavens 75 Import table files to database eiecsnssssesetecssiecernndeceenastessatcecsudenaseestacnnccscemantndechisanetenewesddbanscessiexsneene 76 Delete table files from
30. G to Traill Random Walk AlCA sricu E R araa 37 LOCKING FAILS AUIS sso wisarasc ccs see Sacer einen re r a aaa e aaraa aaeeea 38 REMOVE MO cree suthiond cuscueeueuebecesaatel 39 A Wals a A E E E E S 39 Add MEW trail to MAD rsca E a EE EEr ASTEESEEN SNEER n 39 Conigure Walls sssiccececsscscesesncescceecassceccdeeteenaccenssscceeiiercanes cuvedentceteseertersrceuneeeevssacacdeeddeesaeeweuecudeacesasssesendteatzensooueessase 41 Change Postion Ora Talesa a E AE E er AEE 41 Typs oe ce eara a a a E E er reer ere rer crn error 42 St irelll e1S T OUND esdas E e Dr eee AAEE E A O E a E E RE 43 Specify velocity for whole trail and single SEQMENHS ccccccccceccecseeeeeeeeeeeeeeeeeeeeeesaaaaeaeceeeeeeeeeeeeeesseaaaaaaeeess 43 DIGO Wall setenseawecepceacdcensedesannteacanessenwanqueehsacensatancensensanenseayaneessysanensasesnetsxsagens2aveneuesssanenssasennss gt asngacssaaaneeesesaceess sn 44 S RANGONE WAIK ATEA arca ES 44 Add random walk ar a to Map riricreiiieniinan EAEE AEREE EAE 44 COMMUNE random walk Alca ssscasccacsnsceswescseatecereccsessonameaceweiacusscatanestyniseouncauenscaussccutsniystiuatuecdesnccsanscavsuneenaeceateeeseks 45 Size and position of a deste see cme te saice ecto nieces gnc onctesdes aie apo aeinn seis NiS AANEEN A NAE AA EEE RE ENEAN EEEE ENEAN ENAREN ES 45 Speed range in a random walk ALC A swsscsiwcssnssssewrnensawasneaanenannna sen sneacanaesenagneemenedeaeesuaneatands sarweceneaaasyedumeatecdumeusineats 46 Delete Ra
31. S Sector channel select the indoor area and fill in a value between OdB and 95dB in the input box in the Indoor Reception Level field in the configuration pane and click on the Set for all button next to the input box Indoor Reception Levelt fs dE Set for all 5 The Indoor Reception Level field in the configuration pane of an indoor area To modify the indoor reception level of selected BTS Sector channel Select the indoor area then double click on the attenuation column of the BTS Sector channel whose indoor reception level you want to change in the Indoor Reception Level field in the configuration pane Then type in a value between OdB and 95dB and click with the left mouse button or press enter The attenuation is indicated on green lines if this option is switched on Indoor Reception Level jo de Set for all The Indoor Reception Level field in the configuration pane of an indoor area lt 2005 gt Qosmotec Software Solutions GmbH 62 Qosmotec Air Interface Simulator User Guide 3 8 3 3 8 4 Show or hide connection between indoor area and BTS Sector channel The connection between indoor area and the BT S Sector channels is shown by the green lines which indicate the attenuation The two values displayed beside the connection lines indicate the wall attenuation and the indoor reception level Connection between Indoor area and BTS Sector channels Connection between shaded area and
32. Scenery with BTS Sector and mobile group lt 2005 gt Qosmotec Software Solutions GmbH 22 Qosmotec Air Interface Simulator User Guide Add a new trail to map Either by selecting from the menu bar Objects Trail gt Add to map or click on the add es new trail button in the tool bar Click with left mouse button at the position on the map where you want the new trail to start Click with left mouse button at the position on the map where you want the trail to end To finish the trail click right mouse button ch H enery Lape Wir Scenery map with BTS Sector mobile group and Trail Instead of a trail the user may also place a random walk area on the map lt 2005 gt Qosmotec Software Solutions GmbH Getting started 23 Connect the mobile group to trail To connect a MG to a trail click on the MG with right mouse button and select Connect to Trail Random area from the MG menu A small square now appears on the peak of the Cursor su de i Me 3 7 j ao 4 Name MiG 1 Connected to Position E frai 716 meter Allocahe an server Deka from map Canet bo TTAR area Mobile group menu Move the cursor to the trail s reference point to which the selected MG shall be connected When the reference point of the trail turns red realease the left mouse button to connect MG to trail To run the scenario allocate t
33. Software Solutions GmbH Trouble Shooting 99 9 13 Bad resolution of table file graph Problem When a table file is loaded the graph that displays the attenuations consists of very thick lines and seems to have a bad resolution Check the following Is the time period described in the table file less than 1000 ms In this case it is simply a problem of the representation in the table graph pane This does not affect the application at all lt 2005 gt Qosmotec Software Solutions GmbH 100 Qosmotec Air Interface Simulator User Guide Index added to map column 25 blocked by column 27 used by column 25 A Add a new random walk area to the map 44 Add BTS Pattern files 28 Add BTS Sector to map 25 Add items to map 20 Add mobile group to map 36 Add new fast fading area to map 51 Add new indoor area to map 57 Add new trail to map 39 Add shaded area to map 47 Administration GUI 85 Administrator 89 AIS client 5 9 AIS resource manager 8 AIS server 5 8 Allocate mobile group on server 36 Arrange windows 16 Assign a BTS Pattern File 33 Assign colour to base station 83 Assign Prediction Profile to base station 82 Attenuation data 66 67 68 Attenuation graph 68 Attenuation values 33 67 68 77 90 Attenuation Matrix view 13 67 Attenuator modules 5 6 2x2 6 Attenuators 6 Auto arrange 16 B Base Station 24 25 27 28 31 32 33 35 Base Station Configuration 88 Base Stat
34. aining entries from former AIS versions and the ais ini and aisadmin ini files with the backup copy containing your access configuration data 2 2 Open AIS To start the AIS Client on a Windows PC select Start gt Program Files gt Qosmotec gt AIS gt Air Interface Simulator 2 3 Logging on to AIS Before working with AIS the user must check the server connection settings and log on to AIS 2 3 1 Server connection settings Fill in the IP Address of the AlS Server in the IP Address input box in the server connection settings field of the Connection settings Login dialog Fill in the port number of the AlS Server in the Port input box in the server connection settings field of the Connection settings Login dialog lt 2005 gt Qosmotec Software Solutions GmbH 12 Qosmotec Air Interface Simulator User Guide Fill in your user name in the User name input box in the login field of the Connection settings Login dialog Fill in your password in the Password input box in the login field of the Connection settings Login dialog Click OK The settings can be saved under a name in the Name input box that can be reused for later login For that select the name from the Name input box selection list Connection settings Login ewe Hame 21 2111000 Cancel Connection settings IP address Port Connect now 10 2 2 2712 11000 Login User name Tester 1 The Connection settin
35. around on random paths and with random velocity continually until it is stopped by the user In this section it will be explained how to Add a Random Walk Area to map Configure a Random Walk Area Delete a Random Walk Area Add random walk area to map There are the following possibilities to add a RWA to the map Select Objects gt Random walk area gt Add to map from the menu bar lt 2005 gt Qosmotec Software Solutions GmbH Objects 45 After executing one of these procedures click on the map in the AIS GUI at the place where you want to locate the new RWA Hold left mouse button and drag to set the size of the new RWA heme dts Pentiea Fone A Fatri Bigi jira rete Tee ji Paip Timed pamti A taf g Random walk area in the scenery map 3 5 2 Configure random walk area The user can configure the following parameters of the RWA Size and position of the RWA The speed range within the MGs are walking through the RWA 3 5 2 1 Size and position of a RWA There are the following ways to alter the size and or the position of a RWA Select a RWA and drag to the preferred size and or the preferred position Select a RWA and click on one of the sides of the RWA with left mouse button Hold the left mouse button and drag the side of the RWA to enlarge or to downsize the RWA lt 2005 gt Qosmotec Software Solutions GmbH 46 Qosmotec Air Interface Simulator User Guide
36. ation All current users can be retrieved as a tooltip lt 2005 gt Qosmotec Software Solutions GmbH Objects 27 2 Scenery Map View BTS Sector QaeTs Sector 1 Q BTS Sector 2 Tester 1 ers Sector 3 QipTs sector 4 pTsjSector5 Tester 2 Mobile group allocated by BT S S ector Name BTS Sector 2 Position Channel Chamelt Frequency 215000 MHz Pattern File Omnidirectional Main Bear Deg Output Power i dBm Contour lines Up to 40 dB in steps 5 dE Apply to all Base Stations BTS in scenery map To change the position of a BTS Sector on the Map either drag BTS Sector to a new position or fill in new coordinates in the input boxes of the Position field of the configuration pane 3 2 2 Exclusive BTS Sector reservation A user can reserve a BTS Sector that is not in use by any other tester exclusively by selecting Exclusive Reservation from the BTS Sector menu or selecting Objects gt Base station Sector gt Exclusive Reservation lt 2005 gt Qosmotec Software Solutions GmbH 28 Qosmotec Air Interface Simulator User Guide 3 2 3 3 2 3 1 blocked by Exclusive Reservation from the BTS Sector menu Base stations that are reserved exclusively can only be added to the Scenery Map View by the user that has reserved it They become unavailable and will be greyed out in the BTS Sector pane for all other users The name of the reserving
37. ccssccscsieccccdeeddeacecesscsccasncetecassseecteeteessaesrececucssceverwescesctens tetcousnsencienucreasnssiseedeatsvesaseuenscsesiieact 8 PIS GWGRL E E E E E A E es 9 Beira gee E A E E E E E T E E A A E E E E 9 Part Il Getting started 9 T DStIAIS peesi EE E a S 10 2 Opn PS ratecr ccc cate tse eeatereeccea a sew tenn erence ast se stare ye uee gatreuteme ae ec assvaeuenseuteuk estseuienucbecstusteevencuutace 11 Logging o To AlS costes scsrctcceeeesceceecs onineoe aa 11 Server connection Settings scciisiicewoscc evens ceccceexcescceneeeteceencessueeeiensvsnmesccdeeeceessacccussexebeeseecensncadessdeneesenseoadeebesmacessasenes 11 Disconnecting and Reconnecting ssssssssssnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nnmnnn nnmnnn nennum mnnn mnnn mnnn 12 a Prane WOW Scie cece asec E E 13 Arrange WINGOWS siressa AEE EA swale nasenieanscanabanacesnenuecceateaas 16 DO COMOROS an A S A 18 Create a NEW SCENEI oirne aae A AEE OAE E S EAE EA E AA EE OANE NENANA 18 Open EXISTING Scenery sirrane becca citable cake cecncadaus tenia silecadesetecdeecnuhwadesliudiersducedacoteediasmubeaded tacdiecaeeses 18 SVS SOONG I eras ctez anc ve NE E E EEE NE E 19 CIOS ES SCC ING e vacates E A EE TE E EE N E E A A 19 Delete SCENEI E A E Aa EE EE E EEA EAEE 19 0 EX MDpie RUN AIG sirieni RE EEE AEEA R EERE eee eee 20 Part Ill Objects 23 1 ODjecis in general cecece tees atceencies ce icet aaa EESE E E ESRR 23 2 DBIS OCU ONS a se aa se se cena cate veces eae a
38. ce Simulator accepts no liability for any loss or damage arising from the use of the Qosmotec Air Interface Simulator software and documentation The Qosmotec Air Interface Simulator software and documentation is the confidential and proprietary information of Qosmotec Software Solutions GmbH Confidential Information You shall not disclose such Confidential Information It is furnished under the License Agreement you entered into with Qosmotec Software Solutions GmbH and may be used or copied only in accordance with the terms of the agreement Printed 2006 in Aachen Prerequisite skills For network professionals and system administrators the following skills are assumed Proficiency with Windows based applications General knowledge about mobile networks and expert knowledge about high frequency components such as cable attenuators System administrators are also expected to be familiar with the network test processes and standards of the test labs in which AIS will be used Contents Table of Contents Foreword 0 Part Introduction to AIS 5 T ADOULAIS aa E E A 5 2 TReAIS System COMPONENTS svrsi a E 5 aaee re e E E EE E E 6 The attenuator MOdUIES sscan anin rena AEE RENE EENET RA AER A EENEN A EAEE 6 ER EE E E O E E E E 8 Th AlS TESOUPCE MANAGE wesicsivccde eave ticcescececeescecdeceirecdedeucedeanex ewsttoncentavedeesdateees tenet ensseiiewdeucastivexteteasedvestivevedeenaresds 8 The AIS SWIG MAW IK vs csce
39. e Trail 1 Closed No Connected to MG 1 One way Retur Cycle Cycle infinite Speed km h The pick list in the type field in the configuration pane of a trail A trail can be specified as one of the following types One way The MG walks the trail once from the start point to the end point Return The MG walks the trail once from the start point to the end point and returns Cycle The MG cycles around the trail for a certain number of times defined by the user To define the number of cycles fill in a value in the input box in the type field in the configuration pane Input box in the type field in the configuration pane of trail to specify the number of cycles Cycle infinite The MG cycles around the trail continually until it is stopped by the user Roundtrip A roundtrip is closed route on which a MG circles continually until it is stopped by the user lt 2005 gt Qosmotec Software Solutions GmbH Objects 43 3 4 2 3 Set trail as roundtrip Select the Trail Select from the menu bar Objects gt Trail gt Set as roundtrip or select Set as roundtrip from the trail menu Delete from map Set as roundtrip Resolve roundtrip Edit Trail menu lf a trail is set as a roundtrip it is possible to choose the direction in which the MG circles around the Trail To choose the direction select forward or backward from the pick list in the type field in the configuration pane
40. e Fast Fading Component from the menu lt 2005 gt Qosmotec Software Solutions GmbH 70 Qosmotec Air Interface Simulator User Guide 4 4 4 9 Activate Deactivate Visibility of Fast Fading Effects dome iil 25 55 ws ms mo m sh 15M 30M 1H amp TB The tool bar of the attenuation graph Sector 1 Mixed Graph of fast fading with a time resolution of 2s To switch to the following or preceding time sector use the scroll forward Eat or the scroll backward button from the toolbar Logging into the Attenuation RxLevel graph can be disabled by selecting Edit gt Attenuation Graph Logging Disable Logging from the menu bar Break session To interrupt a session click on the break the session button Em in the tool bar or select Edit gt Break session all mobile groups from the menu bar Click on the break the session button again to continue the movement The MG will continue its movement from the point where it was interrupted Stop session There are the following possibilities to stop a session Click on the stop the session button E in tool bar or select Edit gt Stop session all mobile groups from the menu bar This will terminate the entire session at once The stop the session button is activated if at least one MG in the scenery is running Note If the movement of an MG is stopped it cannot be restarted from the current position lt 2005 gt Qosmotec Softwa
41. e eS aS a e e M e M e e e e e e e a Le Riok 1067 mete Tom TI fela gad r Uui 43 ernustonac DO Setia HBTS 10 GETS 10 Indoor Fecepion Lovet fo E Set for all AN Indoor Area in map 3 8 2 Configure indoor area The user can configure the following parameters of an indoor area Size and Position The wall attenuation The indoor reception level 3 8 2 1 Size and position of an indoor area There the following ways to alter the size and or the position of an indoor area Select an indoor area and drag to the preferred size and or the preferred position Select an indoor area and click on one of the sides of the shades area with left mouse button Hold the left mouse button and drag the side of the indoor area to enlarge or to downsize indoor area lt 2005 gt Qosmotec Software Solutions GmbH Objects 59 Select indoor area and fill in new coordinates in any or all of the Left Bottom Right or Top input boxes in the configuration pane Indon Area Name Indoondrea 1 Left EE meter Bottom 1530 meter Right 848 meter Ton 1073 meter o Sek fr al Indoor Reception Level fo dB Set for all The configuration pane of an indoor area lt 2005 gt Qosmotec Software Solutions GmbH 60 Qosmotec Air Interface Simulator User Guide 3 8 2 2 Set wall attenuation The user may set a single wall atte
42. e file as txt Note VERTICAL is NOT used but needs to be present lt 2005 gt Qosmotec Software Solutions GmbH Objects 31 3 2 3 2 Load BTS Pattern file to database The user has the possibility to import files describing the change of Attenuation according to the radiation pattern of an antenna called BTS Pattern Files to the database and assign them to a channel of a BTS Sector To load a Pattern File to the database select File gt Import BTS Pattern File from the menu bar The Open BTS Pattern Files file dialog appears Unlike in the open scenery dialog only the file system of the users own computer is shown Select the file you want to import to the database click Open Suchen fr Falter Files h CE EE be The Open Pattern File dialog lt 2005 gt Qosmotec Software Solutions GmbH 32 Qosmotec Air Interface Simulator User Guide 3 2 3 3 Select the BTS Sector channel lf a BTS Sector on the server consists off several channels that are indivindually connected to different ports the user has to select a channel of the BTS Sector he wants to configure To select the channel of a BTS Sector select a BIS Sector and select a channel from the pick list in the Channel field in the configuration pane BT5 Sector Mame BTS Sector 3 Foston m 472 meter Channel Channel 1 i Pattern File DEMO Main Beam lo Deg Conto
43. ecified attenuation pattern of a mobile group to each of the BTS Sectors in the table file at a user specified time The table file view window The Scenery Map view window is activated by default The user may arrange the windows in any other mode lt 2005 gt Qosmotec Software Solutions GmbH 16 Qosmotec Air Interface Simulator User Guide 2 4 1 Arrange windows Before the user starts working with sceneries he is advised to arrange the windows of the AlS GUI The user may now arrange the windows of the AlS GUI in one of the following ways Cascade Select from the menu bar Window gt Cascade In the cascade mode the windows appear one behind each other pSatenrry Logging view LO iereibis Petrie whee l eee y Map Th Windows arranged in the cascade mode Tile Select from the menu bar Window gt Tile In the tile mode the windows are arranged quarterly If the windows are arranged in the tile mode the table file view window is visible ear Sag m BS 2 ete Sate ee mu f ee E e Windows arranged in the tile mode lt 2005 gt Qosmotec Software Solutions GmbH Getting started 17 Auto arrange Windows map left Select from the menu bar Window Auto arrange windows map left or click on the arrange frame windows map left button CH in the tool bar Windows auto a
44. ect a BTS Sector from the BTS Sector pane BTS Sector ets Sector 1 UBTS Sector 2 Tester 1 Tester 2 The BTS Sector pane Place the BTS Sector on the map either via drag and drop or select from the menu bar Objects gt Base station Sector gt Add to map All BTS Sectors that are added to your current scenery view are bold printed the BIT S Sector pane If the selected base station is not in use by any other user the output radiation power of the BTS can be configured in the Radiation dialog that pops up when adding the base station to the map The default value that is shown is read from the configuration that is set in the AlS Administration GUI lt 2005 gt Qosmotec Software Solutions GmbH 26 Qosmotec Air Interface Simulator User Guide Radiation Power _ Channel Radiation Power The Radiation Power dialog The number of base stations that are served by one server depends on the number of Switch Matrix Ports n that are served by the AIS Server If the number of base stations that is added to the Scenery Map View by all the users that are logged in to the AIS Server reaches the number of Switch Matrix ports all other base stations become unavailable and will be greyed out in the BTS Sector pane The names of all users who have added a base station to the Scenery Map View are listed in the used by column of the BTS Sector pane By default it shows the first user of the base st
45. eigh Fading is stronger than all Rician Fading profiles and lower K factors are stronger than higher ones The effect of nested fast fading areas is displayed Overlapping fast fading areas lt 2005 gt Qosmotec Software Solutions GmbH 56 Qosmotec Air Interface Simulator User Guide 3 3 Show or hide connection between FFA and BTS Sector channel The connection between FFA and BTS Sector channel is shown by the red lines which indicate the fast fading profile Setar eee a RT Connection between FFA and BTS Sector Connection between fast fading area and BTS Sectors To show or hide the connection lines between FFA and BTS Sector channel click on the show hide connection FastFading area BTS button 4 in the tool bar or select from the menu bar View gt Show Hide connection FastFading area BTS 3 4 Delete fast fading area from map There are the following possibilities to delete a FFA Select a FFA and select Delete from map from the FFA menu Select a FFA and select Objects gt Delete selected object from the menu bar or press del Select a FFA and select Objects gt Fast Fading area gt Delete from map from the menu bar 3 8 Indoor Area A Indoor Area Is a rectangular area in the AlS GUI which represents a room building equipped with a picocell The reception level inside this area called Indoor Reception Level in AIS is assumed to be almost constant So if mobiles move around in this room they will not
46. et ea veace scene geteestensnoeeesseteswuuscentea 24 Add BTS SCCO TO MAD areia E a 25 Exclusive BTS S6ctor reServaUON sirru riais ae a aaa ahaaa eis aaaeaii 27 COMMGUIE B 1S DCOTON nersini nin a e a aaa aei 28 Ad BEO Panen ile ara A A A AO E E EA 28 Load BTS Pattern file to database esineen Eai NE aai 31 Select the BTS Sector Channe cccccccceeccceceeceeeeeeceeeeeeeeeeeeeeeeeeeeeeeeeeeesseeeeeeeeesseeeeeeeeeeessaeeeeeeeeesssaeeeeeeeeeeas 32 chande Preguem yeee a E E EE E A 32 Assign a BTS Pattern File to a BTS Sector Channel ccccssssesseeseeeeeeeeeeeeeeeaeeeeeseeeeeeeeeeeeeeeeeaaaaasseseeseseeees 33 Change the direction of the main D AM cccccccccssssssssssseeeeeeeeeeeeeeeeaaaussseeeeeeeeeeeeeeeeaeaaeasaedeeseeeeeeeeeseeaaaaagesess 33 Configure contour dl 4 lt lt seeeene aaNet ane Reece ene re ene en ttrt CN renee nee Suan rte Seen one ae en ron ce EEEE EEEE eee 33 Romov BTO SOCOM secik a Ra 35 3 MODIG OUPS icri cece siemecctem atiecctewaenec ene seeeesunweccmetewencceuamatcoeacessedececauetwteetuceteaneecenieecaccesnes 35 Add MG TO MaD esdesce sec sesecnccedcaies cance cece eases EEEO SEEK a ERRATE i a aE AEOS EARE 36 lt 2005 gt Qosmotec Software Solutions GmbH ll Qosmotec Air Interface Simulator User Guide Allocate MO ON SOIV ER aces ceca cenesicesceectccecsccesccensuesdeeamoceScuscwaucadensevdeuecuaudeusnussdcusevaxdecencdudewscwauccspavsdepecuawcusenemucesesns 36 Connect M
47. following error message appears AIS Air Interface Simulator x A Invalid user name or invalid password Invalid user name or password Check the following Have user name and password been correctly typed into the login dialog Is the keyboard switched to captital letters when typing the password Contact your system administrator to check if the user password is added on the AIS subrack No Free Licenses Problem The client GUI cannot connect to the AIS server due to missing licenses The following error message appears SS x IN Mo more Free licenses available Please try again later Number of available licenses exceeded Check the following Who has logged in to the AIS server The number of floating GUI licenses cannot be lt 2005 gt Qosmotec Software Solutions GmbH 94 Qosmotec Air Interface Simulator User Guide 9 4 9 5 exceeded Check on your own computer if still other client GUIs are open Check also if nobody is connected to the AIS server with an AIS Administration GUI This also requires one floating license Only in case that the current license users cannot be found the AIS HW may be restarted NOTE All other connected users will be automatically disconnected and their tests will be interrupted in this case Cannot allocate mobile group A mobile group cannot be allocated When selecting Allocate on server from the MG menu the foll
48. gs Login dialog If you do not know the IP address or the port number contact your local system administrator 2 3 2 Disconnecting and Reconnecting While running an AIS client it is possible to disconnect and to reconnect to the AIS server by pressing the Server Connection button L or by selecting Edit gt Disconnect from Server or Edit gt Connect to Server from the menu respectively It is advisable to disconnect from the server before disconnecting from the local area network e g when running the AIS Client on a laptop in order to free the license immediately Before reconnecting to an AIS Server it is possible to modify the server connection settings and the login credentials by selecting Edit gt Server setup from the menu lt 2005 gt Qosmotec Software Solutions GmbH Getting started 13 2 4 Frame windows Once the user is logged on to AIS the following frame windows appear cascaded by default Scenery Map view The scenery map view window displays the map and the BTS Sector pane the mobile group pane and the configuration pane DE Soenery ap view The scenery map view window lt 2005 gt Qosmotec Software Solutions GmbH 14 Qosmotec Air Interface Simulator User Guide Attenuation Matrix view The Attenuation Matrix view window shows the current attenuation of a mobile group to each of the BTS Sectors in the scenery an Attenuation Matrix view Ioj
49. gt Main Beam pooo Deg Contour lines Up to fan dE In steps 5 dE The channel field of the configuration pane of a BTS Sector The user can toggle between displaying the attenuation values that are set by the AIS server and the actual Rx Levels that are received by the connected mobiles on the contour lines For this select View gt RxLevel Values or View gt Attenuation Values respectively or lt 2005 gt Qosmotec Software Solutions GmbH Objects 35 click the Att RxLevel Button a from the Scenery Map toolbar In order to show the correct Rx Level values it is necessary that the AIS server is correctly calibrated 3 2 4 Remove BTS Sector There are the following possibilities to remove a BTS Sector from the map Select a BTS Sector and select Delete from map from the BTS menu Select a BTS Sector and select Objects gt Delete selected object from the menu bar or press del Select a BTS Sector and select Objects gt Base station sector gt Delete from map from the Menu bar 3 3 Mobile Groups A mobile group MG is a set of mobiles that are connected to the same MG output ports of the AlS hardware and therefore receive identical RF signals from all connected BIS They are thus located in the same place in the AIS scenery The available mobile groups are shown in the mobile group pane which also shows connection status running status and allocation status Mobile groups that are added to
50. gt Start table file from the menu bar Before the application starts a please wait info box appears This box remains on the screen for the time it requires to transmit the table files data to the server this might be a few moments As soon as the execution of the table file starts a black vertical bar is displayed which indicates the current time of the log file Indication bar for the current time in the table file ao T Td a z a El 1 cts EE an ED 2 Eci View of a table file graph while running Interrupt table file execution Either click on the Pause table file button in the tool bar or select Edit gt Pause table file from the menu bar To continue either click on the Pause table file button in the tool bar again or selecting Edit gt Pause table file from menu bar again When the user the restarts the table file the application will continue at the next time stamp in the table graph pane Note A table file should not be stopped when it is very close to the end of the execution lt 200 ms This confuses the message flow between client and server Stop table file Either click on the Stop button B in the tool bar or select Edit gt StopTable File from the menu bar If the table file is stopped it can only be restarted at the beginning Prediction Profile View The Prediction Profile View is an application of its own within AIS It enables the user to load predictions that has been generated with a netw
51. guration l i Information User parameter User name hak Eull name Password amp User list fi hak f is normal f dsc narmal User type f Admini Normal Add Remove Apply The User tab of the AIS Administration GUI Server Calibration The AIS Server can be calibrated over the AIS Administration GUI For that the output power of the Base Station needs to be measured as well as the power level that is received by the mobile groups The AIS Server calibration is necessary for getting the correct values when toggling between Attenuation and RxLevel values in the Scenery view The calibration can be started by selecting Tools gt Calibrate or by pressing the calibration button Note Starting a calibration will disconnect all users from the AIS server and stop all running tests The calibration algorithm itsself depends on the setup of the AIS system The basic idea is to measure the BTS output power and to measure the received Rx Level for each mobile group If the AIS is equipped with a digital switch matrix each base station needs to be switched to each port of the switch matrix For each base station that can be used by the AIS server the radiation power level needs to be measured This output power needs to be entered in the AIS calibration setup wizzard lt 2005 gt Qosmotec Software Solutions GmbH AIS Administration GUI 91 415 calibration setup i
52. he mobile group on server by selecting a MG and select allocate on server from the MG menu or select from the menu bar Objects gt Mobilegroup gt Allocate on server and click on the start the session button els in tool bar 3 Objects 3 1 Objects in general The AIS software application offers several objects with which the user may work These objects are the following BTS Sector Mobile groups lt 2005 gt Qosmotec Software Solutions GmbH 24 Qosmotec Air Interface Simulator User Guide 3 2 Trails Random walk areas Shaded areas Fast fading areas All of these objects feature different attributes and functions which are explained in the chapters relating to the specific objects The general handling that applies to all objects and is explained once in general for all objects Reference Points Each object has a reference point RP The RP is shown as a small square within the object e g in the middle of a BT S Sector or at the beginning of a trail ee he ee Reference point of a BIS Sector The user may decide whether the RPs of the objects in the scenery shall be shown or hidden To show or hide the RPs in a scenery click on the show hide reference points button eB in the tool bar or select from the menu bar View gt Show Hide reference points The object menu is accesable by clicking with the right mouse button on the object s RP Selection There are the following possibilities to
53. hooting 92 N Logi O AlS poSSIDIE ices este ce essing a sic sce ice aac aides reeset EEE 92 Wrong User Name or Password iccsccssincccesendnccccnccsesyeendecueccanwetssecsecdssssnecdesmutesuvewusestescwcesdsarsnecusends 93 NOTCE El el 9 L lt a eee cree ne ee er a Sonar ere ae a oe eee Se ee ee ame eee on emer eee ener ener 93 Cannot allocate mobile group siciiiccctesccicancecdscnscecweresersicccadeusnciewdstebineecvensesscbeadedsaccumscasnaccasMexexweces 94 Cannot move a mobile group on the scenery WINKOW ccscccseeeseeeeeseeeseeeseeeenseeeseoeeneeeesees 94 Cannot Edit Trail Random Walk Area Properties cccccccssssseeeeeeeeeeeeeennseeeeeeeeeeeennneeeeees 95 No attenuation shown in the attenuation matrix ccccceeeesseeeeeeseeeeeeseeeeeesseeseenseeeeeeneeesoensenens 95 Start button does not become active ssnsussnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nnmnnn nmmn 95 Mobile Group does not move ON start cccceeeeeesseeeseeeeneeeeseeeenseeeseoeasseeeeeonaseeeseooesseeeseonenseeesens 96 lt 2005 gt Qosmotec Software Solutions GmbH Qosmotec Air Interface Simulator User Guide 10 Attenuation values do not change during movement cceesseeeeeeneeeeeenseeeeenneeeseeneeeseeenees 96 11 Cannot see fast fading area graph cccccessseescesseeeeeenseeceenseeseoeneeeeeeseeseoaseeseonseeesoanseeseonees 96 12 Cannot Open Table File scssi aE aa sie aedac
54. ic Scenery View i e How to switch to the Dynamic Scenery Mode The switching exclusive reservation of base stations The reservation of base station input ports The differences in the execution of sceneries in Dynamic Scenery Mode compared to the Normal Scenery Mode 5 1 Dynamic Scenery Mode In order to enter the dynamic scenery mode select File gt Switch to gt Dynamic Scenery Mode lt 2005 gt Qosmotec Software Solutions GmbH 72 Qosmotec Air Interface Simulator User Guide 5 2 5 3 from the Normal Scenery View menu To switch back to Normal Scenery Mode select File gt Switch to gt Normal Scenery Mode from the Dynamic Scenery view menu Note Open Sceneries have to be closed before leaving the respective mode BTS port reservation In Dynamic Scenery Mode the tester can decide how many of the AIS subrack BTS input ports shall be reserved for his test session The number of desired input ports are exclusively reserved for this tester upon mobile allocation When reserving a number of ports k the AIS application always switches the k strongest Base Stations to the reserved ports The signal of other base stations switched to other than the reserved input ports does not become visible for the selected mobile group To reserve a number of ports for one mobile group select Reserve and Allocate gt k Ports from the mobile group menu The number of reserved BTS input ports
55. ifth line Type HORIZONTAL in the sixth line This parameter determines the number of deviations clockwise from the main fr with a user defined attenuation value beam for x degrees for a full 360 scale pattern Enter a space character and type in a the number of attenuation values for the antenna pattern Note This value must be a nonnegative integer and not higher than 360 e g If the user set the number of deviations in the HORIZONTAL parameter he must fill in no more and no less than 36 deviation values in degrees with a user defined attenuation For example a value at every 10 degrees lt 2005 gt Qosmotec Software Solutions GmbH 30 Qosmotec Air Interface Simulator User Guide Type the degrees of deviation from the main beam and their attenuation value in dB in the lines below the HORIZONTAL parameter Use the first column of each line for the deviation value and the second for it s attenuation The devation value must be a nonnegative integer demo antenna pattern Editor Datei Bearbeiten Format NAME DEMO FREQUENCY 2150 GAIN 10 00 ded TILT COMMENT DEMO HORIZONTAL 360 0 0 O 0 PS a eee Deviation value in 2 0 0 0 degrees 3 0 0 1 fo ek 5 0 O 1 6 0 0 1 fo Ded 5 0 2 10 0 O 2 dE 11 0 0 4a ee 13 0 0 6 14 0 0 6 15 0 0 8 16 0 0 8 A BTS pattern file After filling in all values for the horizontal level tyoe VERTICAL and proceed just as with the horizontal Sav
56. il with sveral segments To finish a trail click with the right mouse button anywhere in the map after finishing the last lt 2005 gt Qosmotec Software Solutions GmbH Objects 41 segment of the trail Note Trails will be named only when they are finished 3 4 2 Configure trails The user has the following possibilities to configure a trail Change the position of a trail on the map Specify the type of trail Set a trail as roundtrip Specify the velocity of the wohle trail and single segments 3 4 2 1 Change Position of a trail To change the position of a trail on the map select a trail Hold left mouse button to drag the trail to a new position within the map To edit the positions of the segment points of a trail fill in new coordinates for the segment points in the position field of the configuration pane Ti Neve Tiad Connected by Gt Te Chews eee Speed oo Emh Setio al The position field of the m s v COMMguration 1 MS 6H pane Fs faia Ei The configuration pane of a trail NOTE To change the position of a trail the trail must NOT be connected with any mobile groups lt 2005 gt Qosmotec Software Solutions GmbH 42 Qosmotec Air Interface Simulator User Guide 3 4 2 2 Types of trails To specify the type of a trail select a type from the pick list in the type field in the configuration pane Trail Ham
57. ile lt 2005 gt Qosmotec Software Solutions GmbH 76 Qosmotec Air Interface Simulator User Guide 6 3 Datei Bearbeiten Ansicht Einf gen Format Extras Daten Fenster Des SRY BB O B A A iB 2 ar Alt k E S a a a Oo EN IMG BTS1 BTS2 BTS3 BTS4 0 1 10 11 12 13 5 2 11 12 13 14 1000 1 20 21 22 23 1005 2 21 22 23 24 oe 2000 30 31 32 33 2005 2 31 32 33 34 a 3000 1 Ag At 42 43 g 3005 2 At Ap AJ Ad 4000 1 50 5 52 53 A005 2 5 52 53 54 12 Example for a csv table file in Excel Note Depending on the default language Excel creates csv files with commas or with semicolons as separator Both is accepted by AIS but no other separator can be used Import table files to database To import a table file to the database switch to the table file mode Select from the menu bar File gt Import table file into Database or press the import table file button oe The open table file dialog appears Unlike in the open scenery dialog only the file system of the users own computer is shown Select table file and click open W testfilehagi O Dateityp csv Files Mcs Abbrechen p 3 The open table file dialog lt 2005 gt Qosmotec Software Solutions GmbH Table file view 77 The Import table file into database dialog appears Fill in a name under which the table file shall be displayed in the database in Name field of the Import table file into databa
58. iles shortcuts and registry entries Remove Air InterFace Simulator From your computer Installshield lt Back Cancel Removing AIS Note Removing AIS may delete all your sceneries if you save them in the local database on your computer as well as all preconfigured access data to the AIS server To prevent this make a copy of your database file AlS mdb and of the configuration files ais ini and aisadmin ini that is located in your local installation directory before removing the software After removing AIS from your client computer you have to start setup exe again and follow the steps in the Install Shield Wizzard Select Complete in the Setup Type window for a full installation lt 2005 gt Qosmotec Software Solutions GmbH Getting started 11 ie Air Interface Simulator InstallShield Wizard Setup Type Choose the setup type that best suits your needs Please select a setup type Complete All program Features will be installed Requires the most disk space Choose which program Features you want installed and where they Will be installed Recommended For advanced users Installing AIS By default AIS is installed with an empty local database and empty configuration files ais ini and aisadmin ini If you use the database locally installed on your computer you may replace the empty AlS mdb file in the AIS installation directory with a copy of a database file cont
59. in to the AIS Administration GUI is identical with logging in to the AlS GUI AIS Setup Information The Information tab of the AIS Administration GUI lists the following AIS setup information e The AIS server version e The number of concurrently usable GUI licenses on this AIS server e The number of base stations that is served by this AIS server e The number of Switch Matrix ports that is served by this AIS server if switch matrix hardware is part of the system e The number of Mobile Group ports that are served by this AIS server e The software features that are licensed on this AIS server Note It is not possible to edit anything in this tab lt 2005 gt Qosmotec Software Solutions GmbH AIS Administration GUI 87 ee User ip BTS configuration E Mobile configuration i Information GUI licenses 1 BTS connectors 4 Switch matris connectors 4 Mobile ports 2 Server version 4 3 1 Featurelist Features Availability o Topographic simulation feature available Multichannel feature not available w Fast fading feature available Scenerm GUI feature available X LTS integration scenery support feature not available X LTS integration tablefile support feature not available Inverse shaded areas feature not available Table files feature available x BTS pre attenuation feature not available Trails feature available Random walk areas feature available 7 Shaded areas feature a
60. indicated in the used by column The prediction profile that shall be assigned to the base station can now be selected from the BTS properties window Note All Base Stations used in one simulation must have prediction profiles for the same area assigned For this reason only prediction profiles with matching dimensions are offered to the user as soon as there is a prediction profile assigned to one base station The other ones are not offered in the selection list though they are imported into the database To make them visible again all assigments need to be removed from all base stations in use The predicted enviroment will be displayed in the Prediction Profile view A legend in the base station properties view displays how to interprete the colours in terms of Rx Levels When dragging the mouse pointer over the predicted environment the coordinates and the predicted field strength will be displayed for each position lt 2005 gt Qosmotec Software Solutions GmbH Prediction Profile View 83 7 4 oc Prediction Profile iew Quadrant Rx level Bri JA Prediction profile for one base station loaded into the Prediction Profile View Changing Prediction Views AIS offers several views on the predicted area By default when selecting one base station in the BTS pane the prediction for this single base station is displayed in the Prediction Profile View Besides to that the User can display the maxi
61. ion Names 88 Base Transceiver Station 33 35 24 25 27 28 31 32 Best serving base station view 83 Block BTS Sector 27 Break session 70 BTS Pattern Files 28 31 33 BTS port reservation 72 BTS Sector pane 25 27 72 C Calibration 90 Change Frequency 32 Change position of a fast fading area 52 Change position of a random walk area 45 Change position of a shaded area 48 Change position of an indoor area 58 Change size of a fast fading area 52 Change size of a random walk area 45 Change size of a shaded area 48 Change size of an indoor area 58 Change the position of a BTS Sector 25 Change the position of a mobile groupe 36 Change the Position of a Trail 41 Channel 24 32 33 Channel Configuration 88 Close sceneries 19 Configuration 23 4x4 6 8x8 6 Configure BTS Sector 28 31 32 33 Configure fast fading area 52 Configure indoor area 58 Configure random walk area 45 Configure shaded area 48 Configure Trails 41 Connect mobile group to random walk area 37 Connect mobile group to Trail 37 Contour lines 33 CPU 6 Create scenery 18 20 Creating csv table files 75 Cycle 42 Cycle infinite 42 D De allocate 36 De allocate mobile group 36 lt 2005 gt Qosmotec Software Solutions GmbH Index 101 Delete fast fading area 56 Delete indoor area 62 Delete Prediction Profile 81 Delete Random Walk Area 46 Delete sceneries 19 Delete shaded area 50 Delete table files from database 77 Delete trail
62. ir Interface Simulator User Guide Prediction Profile 80 81 Prediction Profile Mode 81 Prediction Profile View 80 Preparations 65 R Radiation Power 88 90 Random walk area 37 44 45 46 Rayleigh fading 53 Reception Power 90 Reference point 23 Release mobile group 36 Remove BTS Sector 35 Remove mobile groups 39 Repetitions 79 Reservation of BTS ports 72 Reservation of BTS Sector 27 resource manager 5 Return 42 Rician fading 53 Roundtrip 42 43 Run AIS 20 Run Scenery 65 66 67 68 70 Run table files 79 RxLevel values 33 67 68 77 90 S Save sceneries 19 Scenery 9 18 19 65 Scenery Mode 75 Scenery Logging view 13 68 Scenery Map view 13 Sector 24 25 27 28 31 32 33 35 Selection 23 Server connection settings 11 85 Set BTS Sector Attenuations 49 Set fast fading profiles 53 Set indoor reception level 61 Set outside attenuations 60 Set Trail as roundtrip 43 Setup Information 86 Shaded area 47 48 49 50 Show connection between fast fading area and BTS Sector 56 Show connection between indoor area and BTS Sector 62 Show connection between shaded area and BTS Sector 50 Show reference poinis 23 Simulation in Prediction Profile Mode 85 Size and position of a fast fading area 52 Size and Position of a random walk area 45 Size and position of a shaded area 48 Size and position of an indoor area 58 Size and step width of contour lines 33 Speed 43 46 Speed range in a ra
63. is a software program that runs on the micro controller inside the AIS subrack see chapter The Subrack and calculates and controls the signal strength of the attenuators in a subrack These calculations take into account the position of mobiles and base stations sectors in the virtual landscapes created on the AIS clients The AIS resource manager The AIS software provides a simple resource manager for multi user access The resource manager handles requests for mobile groups from users and it ensures that allocated mobile groups cannot be accessed or monitored by other users The AIS switch matrix The AIS switch matrix is an optional component that allows to connect more base stations to an AIS than actually usable due to the number of attenuators With an m x n switch matrix a subset of all m connected base stations is mapped to the n BTS input ports of the AIS subrack that can be served by an AIS server The handling of the AIS switch matrix is done implicitly by the AIS server The user clients will always be updated with the current information of the used subset of base stations that are made usable through the switch matrix lt 2005 gt Qosmotec Software Solutions GmbH Introduction to AIS 9 1 2 6 AIS client The AIS GUI is installed on a client which is linked to the AIS hardware using the fast Ethernet network in the test lab A client is a standard PC running Windows 2000 or XP From the GUI you can
64. is displayed in the mobile group configuration pane Mobile group connected allocated by running and Allocate 2 Forts Ma 6 Delete f a Ports elet e hrom map 4 Ports Disconnect hrom Trail Random walk area Connect to Traill Random area Release Ports Shan Attenuation Graph Port Reservation If ports are reserved by one user the number of available ports that is free for other users decreases automatically The number of public available ports is always indicated in the status bar of the AIS client GUI public available ports 2 Tester 1m e212 11000 0 Public available Ports decreased by 2 BTS port reservations can be cancelled by an AIS adminstrator Switching exclusive BTS reservation It is not possible to switch one BTS at the same time to more than one BTS input port on the AIS subrack In order to gurantee that a BTS is free for being switched on one of the reserved ports at the moment where it is one of the k strongest ones in the scenery the usage of each BTS placed in the scenery must be exclusive regarding all the other users on the same switch matrix For that reason lt 2005 gt Qosmotec Software Solutions GmbH Dynamic Scenery View 73 base stations that are placed on the scenery automatically become reserved switching exclusive This exclusivity is displayed with the user name and the switch matrix number in the switching exclusive column of the BTS Sector pane A switching e
65. isible in the Attenuation Rx Level Matrix View and in the Attenuation Rx Level Graph View where those BTS that do not belong to the k strongest ones are automatically set to maximum attenuation minimum Rx Level lt 2005 gt Qosmotec Software Solutions GmbH 74 Qosmotec Air Interface Simulator User Guide E Dynamic Scenery Yiew 5 xj BTS Sector blacked b BTS Sector 1 Tester ABTS Sector 2 Tester BTS Sector a Tester BTS Sector 4 Tester BTS Sector 5 Tester 1 Tester BTS Sector 6 Tester 1 Tester BTS Sector T Tester BTS Sector a Tester GABTS Sector 9 ars Sector 10 Mobile group connected allocated by running Tester 1 H Soe eeeocda MMobilegroup Name MG 1 Connected to Trail 1 Reserved Ports 2 Running a scenery in Dynamic Scenery Mode with 2 reserved BTS ports Table file view The table file view is an application of its own within AIS It shows the attenuation of MGs to BTS Sectors at user specified time stamps according to a user created comma or semicolon separated value csv file Table files are useful to replay a recorded scenario from field measurements or to create an artificial RF Scenario that cannot be reproduced by placing base stations in the scenery window Table files may be saved in the filesystem of the user s computer or in the local database and are accesible in both without any impairment
66. mal field strength or the best server on the whole predicted area To switch to these views select View gt Display maximal field strength or View gt Display best serving base station To facilitate distinguishing the base stations in the Best Serving Base Station View the user has the possiblity to assign a colour of his choice to each base station over the BTS context menu lt 2005 gt Qosmotec Software Solutions GmbH 84 Qosmotec Air Interface Simulator User Guide blocked b S BTS Sector 1 7 N rie ak isc sn 8 ae eat ead ao Exclusive Reservation VETS Sector 2 ener w Use For predict simulation OUBTS Sector 3 eee BTS Sector 4 Choose color Assigning a colour to a base station for Best Serving Base Station View The area that is covered with maximum field strenght by a base station is displayed in the selected colour The colour also applies to the Attenuation Graph View W Attenuation Graph first mobile 6562 40 7000 60 BTS Sector 1 7a ee a0 p 20 BD oo 120 150 _ D 7875 7 8213 a Bo 5750 BTS Sector 2 Channel 4 aD g 30 ao a0 120 150 The Best Serving Base Station View and the Attenuation Graph with user specified colours lt 2005 gt Qosmotec Software Solutions GmbH Prediction Profile View 85 Note AIS switches back automatically to the default view of one base station profile if a base station is selected from
67. n pane Then type ina value between OdB and 95dB and click with the left mouse button or press enter The attenuation is indicated on blue lines if this option is switched on B75 Sechor ttenuations dE Set for all BTS The BTS Sector Attenuations field in the configuration pane of a shaded area 3 6 3 Show or hide connection between shaded area and BTS Sector channel The connection between shaded area and BTS Sector channel is shown by the blue lines which indicate the attenuation Connector attenuation between shaded area and BTS Sectors Connection between shaded area und BTS Sectors To show or hide the connection lines click on the show hide connection shaded area BTS button si lin the tool bar or select from the menu bar View gt Show Hide connection Shaded area BTS 3 6 4 Delete shaded area There are the following possibilities to delete a shaded area Select a shaded area and select Delete from map from the shaded area menu Select a shaded area and select Objects gt Delete selected object from the menu bar or lt 2005 gt Qosmotec Software Solutions GmbH Objects 51 press del Select a shaded area and select Objects gt Shaded area gt Delete from map from the menu bar 3 Fast Fading Area A fast fading area FFA is a rectangular area in the AIS GUI where the local attenuation between MGs and BTS Sectors is randomly varied over short distances so that mobiles
68. ndom Walk ALEA serisinin E E EAA E AEE EA E EAA 46 AGS ANC aire a A E E 47 Add shaded area to Map ssssssssnuunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nnmnnn nnmnnn nnmnnn nnmnnn 47 Configure shaded area cccccceeeeeeeeeeeeeeneeeeeeeeeeeeeeeeeeeeeeeneeeeaessaaaseeeeseeseeeeeeeaeessasaaaeeeessesseneengnaensnsaaaeeeeesessseaanonns 48 Size and position OF a shaded ARCA essen tecesrecatsiosecsarehstiica cbs Ea aE EEEN EEN EEEN EE NEEESE 48 96l BTS eCorANeEnuUANONS asec EE A ee eee eee eee 49 Show or hide connection between shaded area and BTS Sector channel ccccceeeeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 50 Delete shaded area crise cactac cc get eccaiati cc ca kaic hte eee dc ce cine isndnc nan in ksia em mec nd asia cnn cic de es dim sec bmn sie da cee he stan 50 7T MAS LWA PC hr a aes rect E E aoteamesmenceaneeacseseeucsedmeeeumnenene 51 Add new fast fading area to Map wacccsctcncdeccssnccscccesidcesceccssestceaienceuessscedseteecsssnsescteeadeacessesseaudsaiereeuenssscdeneteecesseereces 51 Coniig re fast fading AEA acsecascetaccscecctteecicdacscssdcduersestaseueetedaesstetucectsiadaeeseetedeasedccaseseebeccceutedoucbiadedceseiceaersendececeetads 52 Size and position of a fast fading AVCA eeeccccccccccsseeeeeseeeeeeeeeeeeeeeeeeaaeesssceeeeeeeeeeeeeeesauaaeaasedeeeeeeeeeeeseeeaaaaaaeeess 52 FaSt ading OO WSS essa e a E ar r SEEE r R Eaa SR 53 Show or hide connection between FFA and BTS Sector channel
69. ndom walk area 46 Start session 65 Start table file 79 Stop session 70 Stop table file 79 Subrack 5 6 Switch Matrix 8 71 Switching exclusive reservation 72 system components _ 5 6 8 9 T Table file 74 76 77 79 Table File Mode 75 Table file view 13 74 75 76 77 79 Table files 75 csv 75 Table graph 77 Table graph pane 77 Table text pane 77 Tile 16 Trail 20 37 39 41 42 43 44 Trail segments 39 43 Transmit button 65 Transmit data to server 65 Types of Trails 42 43 U User Administration 89 NV Velocity 43 46 Viewing the attenuation data 66 Viewing the Attenuation RxLevel data 67 68 lt 2005 gt Qosmotec Software Solutions GmbH Index W Wall Attenuation 56 Windows 13 16 cascade 16 103 lt 2005 gt Qosmotec Software Solutions GmbH N S Qaosmoteece support qosmotec com Qosmotec Software Solutions GmbH Roermonder StraBe 199 52072 Aachen Germany www gosmotec com
70. ns GmbH Objects 39 3 3 5 Remove MG There are the following possibilities to remove a MG from the map Select a MG and select Delete from map from the MG menu Select a MG and select Objects gt Delete selected object from the menu bar or press del Select a MG and select Objects gt Mobilegroup gt Delete from map from the Menu bar 3 4 Trails A trail is an open route of linear segments in the AIS GUI on which a MG may walk along forth and back once or several times In this section it will be explained how to Add a new trail to map Configure trails Delete trail 3 4 1 Add new trail to map Either select from the menu bar Objects Trail gt Add to map or click on the add new 5 trail button in the tool bar with left mouse button lt 2005 gt Qosmotec Software Solutions GmbH 40 Qosmotec Air Interface Simulator User Guide Click with the left mouse button at the position on the map where you want the new trail to Start Click with the left mouse button at the position on the map where you want the segment of the new trail to end The minimum trail segment length is 10 meters Scenery Map view Trail added to map To add further segments of the trail click with the left mouse button at the position on the map where you the next segment to end after finishing the segment before This procedure can be repeated as often as required Ge Scenery Map view A tra
71. nuation for an indoor area for all BI S Sector channels in the scenery or set different wall attenuations for some or each of the BI S Sector channels in the scenery To define a single attenuation for every BTS Sector channel select the indoor area and fill in a value between OdB and 95dB in the input box in the Wall Attenuation field in the configuration pane and click on the Set for all button next to the input box Wall Athenuatiory Set for all The Wall Attenuation field in the configuration pane of an indoor area To modify the Wall attenuation of a selected BTS Sector channel Select the indoor area then double click on the attenuation column of the BTS Sector channel whose Wall attenuation you want to change in the Wall Attenuation field in the configuration pane Then type in a value between OdB and 95dB and click with the left mouse button or press enter The attenuation is indicated on green lines if this option is switched on Wiall Atbernuatiory lo dB Set for all D The Wall Attenuation field in the configuration pane of an indoor area lt 2005 gt Qosmotec Software Solutions GmbH Objects 61 3 8 2 3 Set indoor reception level The user may set a single indoor reception level for an indoor area for all BTS Sector channels in the scenery or set different indoor reception level for some or each of the BTS Sector channels in the scenery To define a single attenuation for every BT
72. o enlarge or to downsize the FFA lt 2005 gt Qosmotec Software Solutions GmbH Objects 53 Select a FFA and fill in new coordinates in any or all of the Left Bottom Right or Position input boxes in the configuration pane r Fast Fading Area Name FFArea 1 BTS Sector F ast Fading Factor Set for all Sector Rayleigh Fading The configuration pane of a fast fading area 3 7 2 2 Fast fading profiles The user may specify a single fast fading profile for all BTS Sector channels in the scenery or set different fast fading factors for some or each of the BTS Sector channel in the scenery lt 2005 gt Qosmotec Software Solutions GmbH 54 Qosmotec Air Interface Simulator User Guide To set a fast fading profile for all BTS Sector channels in the scenery Select a fast fading area and select a fast fading profile from the selection in the BTS Sector Fast Fading Factor field of the configuration pane and click on the Set for all button next to the input box BTS 5ector Fast Fading Factor No Fading bi Set for all Mo Fading Rayleigh Fading Rician Fading K 1 Aician Fading K 2 Rician Fading K 3 Aician Fading K 4 Rican Fading 5 BTS Sector Fast Fading Factor field of the configuration pane To set a fast fading profile for a selected BIT S Sector channel Select the FFA click on the Fa
73. ore the scenery is closed if any changes have not been saved yet Delete Scenery There are the following possibilities to delete a scenery To delete an already open scenery select File gt Delete current scenery from database from the menu bar lt 2005 gt Qosmotec Software Solutions GmbH 20 Qosmotec Air Interface Simulator User Guide lt is also possible to delete a scenery from database via the Open scenery or the Save scenery dialog Select a scenery from the database or type the name of the scenery you want to delete in the name field and click on the Delete button Database with stored AIS files 2 6 Example Run AIS It is a assumed that the user is logged on to AIS the windows are already arranged and no scenery is running Activate the Scenery Map view window Select a BIS Sector from the BTS Sector pane and place the BTS Sector on the map either by drag and drop or select from the menu bar Objects gt Base station Sector gt Add to map Name BTS Sector 55 ester LF jEr meie Fieger 2150 MHe Paliga Fix Orndrectonsl ManBean I Deg r oia kex Upto 80 d m eps E gi Scenery map with BTS Sector lt 2005 gt Qosmotec Software Solutions GmbH Getting started 21 Select a mobile group MG from the mobile group pane and place the mobile group on the map by drag and drop Scemery Map view 100 BTS Undecked
74. ork planning tool and to simulate a movement within this prediction according to the calculated values lt 2005 gt Qosmotec Software Solutions GmbH Prediction Profile View 81 In order to simulate a prediction in a given area with AIS it is necessary to have prediction files containing only one Base Station for the whole area It is not possible to simulate a prediction that contains the signal of more than one Base Station Thus if for example 4 Base Stations are involved AIS needs individual predictions for each single Base Station With AIS it is possible to display views like maximum field strength or best serving base station In this section it will be explained how to Enter the Prediction Profile Mode Import prediction profiles Use a Base Station in Prediction Profile Mode Select different views on the prediction Run a simulation with AIS in the predicted environment 7 1 Prediction Profile Mode In order to enter the Prediction Profile Mode select File gt Switch to gt Prediction Profile Mode from the Scenery View menu To switch back to Scenery Mode select File gt Switch to gt Scenery Mode from the Prediction Profile View menu Note Open Sceneries have to be closed before leaving the respective mode 7 2 Import Prediction Profiles Prediction Profiles have to be saved in the local file system as 3ga files One file must not contain the prediction of more than one Base Station
75. owing error message appears Allocation Status x 4 The requested Mobile Group is already lt j allocated by another user Mobile Group allocation failure Check the following Who has the requested mobile group currently in use The resource manager does not allow concurrent usage of mobile groups Check on your own computer you have allocated the mobile group in another open GUI Check also if in use by a running table file For executing table files the mobile groups are automatically allocated by AIS Only in case that the current user of a mobile group cannot be found the AIS HW may be restarted NOTE All other connected users will be automatically disconnected and their tests will be interrupted in this case Cannot move a mobile group on the scenery window Problem A mobile group cannot be moved with the mouse on the scenery window Check the following Is the mobile group connected to a trail or random walk area In this case it must be disconnected before it can be moved lt 2005 gt Qosmotec Software Solutions GmbH Trouble Shooting 95 9 6 Cannot Edit Trail Random Walk Area Properties Problem The properties of a trail or random walk area cannot be edited Check the following Can you see the properties pane of the trail or random walk area If the reference points of several objects are placed over each other you have to click with several mouse clicks to
76. p Configure a shaded area Show or hide connection between shaded area and BIS Sector channel Delete shaded area 3 6 1 Add shaded area to map There are the following possibilities to add a shaded area to the map Select Objects gt Shaded area gt Add to map from the menu bar Click on the add new shaded area button E in the tool bar lt 2005 gt Qosmotec Software Solutions GmbH 48 Qosmotec Air Interface Simulator User Guide After executing one of these procedures click on the map in the AIS GUI at the place where you want to locate the new shaded area Hold left mouse button and drag to define the size of the new shaded area 2 Scenery Mag view Hone Shirea 1 Left 43 rebar Potion E haia Right 1051 mete Teg En mete BTS prioritera b a Set fo al l EI Sey 10 A shaded area in the scenery map 3 6 2 Configure shaded area The user can configure the following parameters of a shaded area Size and position The additional attenuation within the area per BTS Sector channel 3 6 2 1 Size and position of a shaded area There the following ways to alter the size and or the position of a shaded area Select a shaded area and drag to the preferred size and or the preferred position Select a shaded area and click on one of the sides of the shades area with left mouse button Hold the left mouse button and drag the side of the shaded area to enlarge or to downsize shaded area
77. ption Power per switch matrix port for BTS 1 and all other Mobile groups Press the Calibrate Button _Calibrate_ that appears when you have reached the last switch matrix port on the last mobile group Trouble Shooting This chapter summarizes typical errors or and explains reasons or potential error sources When an error occurs or you do not now how to handle the tool try to solve your problems first with readint the following sections If you do not succeed with the hints given here or any other problem occurs that is not described please write a detailled bug report to Support qosmotec com No Login to AIS possible Problem The client GUI cannot connect to the AIS server After some seconds the following error message appears AIS Air Interface Simulator x A Connection to server could not be estalished Check the settings or contact your 415 system administrator No Connection to AIS Server Check the following Is the AIS subrack reachable over the network Try to ping it lt 2005 gt Qosmotec Software Solutions GmbH Trouble Shooting 93 9 2 9 3 Check the server connection settings in the login dialog Check the firewall on your client PC Contact your system administrator to check the running processes and the configuration on the AIS subrack Wrong User Name or Password Problem The client GUI cannot connect to the AIS server with username password error The
78. re Solutions GmbH Running sceneries 71 The user may also stop only a single MG by selecting the MG and selecting Stop from the MG menu This only stop the selected MG whilst the other MGs in the scenery will continue to run the trails RWAs they are connected to For Start Allocate on server pe Allacate on server Delete From map Disconnect From Trail Random walk area Connect to Trail Random area Show graph of Fast Fading 1000 MG menu to stop selected MG 5 Dynamic Scenery View If an AIS system is equipped with a m x n switch matrix where m specifies the number of base stations that can be connected to the AIS system and n specifies the number of BTS input ports into the AIS subrack the Dynamic Scenery View is an optional feature that allows to place more base stations on a scenery than BTS input ports are available The AIS application automatically switches the strongest base stations to the subrack input ports Since it is not possible to switch one base station to different subrack input ports at the same time the usage of base stations requires exclusivity regarding users testing on the same switch matrix For mobile groups that are used in this mode the allocation concept is not enough Additionally base station input ports have to be reserved in order to guarantee the signal of the desired number of strongest base stations at any time The following chapters explains how to work with the Dynam
79. rranged map left Auto arrange Windows map top Select from the menu bar Window gt Auto arrange Windows map top or click on the arrange frame windows map top button in the tool bar Windows auto arranged map top To bring a frame window to front and activate it select from the menu bar Window and the window you want to activate e g Window gt Scenery Map view lt 2005 gt Qosmotec Software Solutions GmbH 18 Qosmotec Air Interface Simulator User Guide 2 5 2 5 1 2 5 2 Sceneries Create a new scenery If a scenery is already opened in the AIS GUI and the user wants to create a new scenery Select from the menu bar File gt New Scenery AIS instance or press Ctrl N If no scenery is opened the user may start to create a new secenery by placing objects on the map See also section Example Run AIS Open existing scenery To open an existing scenery from the menu bar File gt Open Scenery or press Ctrl O The open scenery dialog appears Open scenery E xj The Open scenery dialog Select a scenery from database or type name of the scenery you want to open in the name field and click open lf a scenery has been running for a while and the number of log entries exceeds 10 000 the user will be given the opportunity to load only the last 10 000 log entries to avoid long loading times A pop up window prompts the user to decide whether to load only the last
80. rs support 16 individually modulated radio paths For GSM GRPS attenuators the range of attenuation is 0 to 63 dB within a frequency range of 800 2000 MHz For UMTS attenuators the range of attenuation is 0 to 95 dB within a frequency range of 1600 2500 MHz The attenuator modules are adjustable by software control in 1 dB steps The response time of an attenuator is 8 micro seconds The base configuration is 4x4 4 mobiles and 4 base stations sectors This is realized with one drawer put into a subrack Two 4x4 configurations can be externally connected by using cables to form a single 8x4 configuration 8 mobiles x 4 base stations sectors or 4 mobiles x 8 base stations sectors To create larger configurations of mobiles and base stations sectors the signal needs to be split Splitter combiner panels can be provided for this purpose lt 2005 gt Qosmotec Software Solutions GmbH Qosmotec Air Interface Simulator User Guide 1 2 3 1 2 4 1 2 5 There is an additional attenuation of the signal of 4 dB when a splittercombiner panel is used For this reason the largest configuration possible is 8x8 An 8x8 configuration for UMTS is shown in the following figure dad Config An 8x8 configuration When two subracks are used the server in one subrack acts as the master and the other server acts as the slave so that users of the AIS GUI see one system rather than two The AIS server The AIS server
81. s ATS Error n a A Tablefile contains info about nonexistent Mobile Group 114 Mobile Group specified in table file does not exist Does it use an invalid BTS Sector If a BTS Sector outside the available range e g BTS Sector 5 for a 4x4 specification is specified the following error message appears lt 2005 gt Qosmotec Software Solutions GmbH 98 Qosmotec Air Interface Simulator User Guide ATS Error n eee A Tablefile contains info about nonexistent BTS 10 BTS Sector specified in table file does not exist Is a BTS Sector used twice A BTS Sector must only appear in one column If the same one is reused the following error message appears AtS Error n a AN Error 14 Tablefile contains more than one column per BTS The same BTS Sector used mulitple times Does the table file start with time stamp 0 If not the following error message appears SS t C x AN Table file needs to start with time stamp O 13 Wrong time stamp in table file Are the time stamps sorted in ascending order Is there a minimum time gap of 1 ms between the specified time stamps in the table file You cannot specify two lines with the same time stamp even not for different mobile groups If not the following error message appears ATS Error A Timestamps in tablefile are not incremented properly 12 Time stamps not sorted correctly in table file lt 2005 gt Qosmotec
82. se dialog and click Import Import table file into database TH zx Mame Testhle 1d Existing table files Testilel je Testiile Testes Testhile4 TestileS Testile Testiile Testileg Testileg The Import table file into database Note If the user wants to import a table file whilst working with another table file a pop up dialog appears asking whether to import the currently loaded table file Click Yes to import the currently loaded table file 6 4 Delete table files from database The user has the following options to delete a table file from the database Select File gt Load table file to database from the menu bar or press the load table file button b The Load table file from database dialog appears Select the table file you want to delete in the list and click on the Delete button A confirmation dialog appears Click Yes to delete the table file from the database Select from the File gt Import table file to database from the menu bar or press the import table file button b Select a table file and click open The Import table file into database dialog appears Select the table file you want to delete in the list and click on the Delete button A confirmation dialog appears Click Yes to delete the table file from the database 6 5 Working with table files in AIS Open table file in the file system of the users computer or load a table file from database To open a table file from the file system selec
83. select an object Click on the RP of an object with the mouse BTS Sectors and mobile groups may also be selected by clicking on them in either the BTS Sector or mobile group pane If an object is selected the configuration pane for the selected object appears below the mobile group pane Configuration When the user changes the configuration of an object the changes are enabled by pressing enter or clicking anywhere on the map BTS Sectors A Base Transceiver Station BTS Sector transmits radio signals to the mobile groups connected with the AIS hardware The default radio propagation model set for a BTS Sector channel is the free space path loss model but it is possible to set user defined radio propagation models for a BTS Sector The frequency dependent signal loss according to this model in dB is indicated by contour lines around the BTS symbol A BTS Sector can consist of several channels that are individually connected to different lt 2005 gt Qosmotec Software Solutions GmbH Objects 25 ports of the AIS Hardware The channels of a BTS simulate different antennas of a Base Station transmitting radio signals to the mobile groups connected with the AIS hardware in the same way like a BTS Sector with only a single channel In this section it is explained how to Add BIS Sector to map Reserve a BIS Sector for exclusive usage Configure BTS Sector Delete BTS Sector 3 2 1 Add BTS Sector to map Sel
84. st Fading Type column of the BTS Sector channel whose fast fading profile shall be altered in the table in the BTS Sector Fast Fading Factor field of the configuration pane A selection box appears Select a fast fading profile from the pick list and click with the left mouse bution or press enter Fast Fading Type Rayleigh Fading Aician Fading K 1 Aician Fading K 2 Aician Fading k 3 Pick list in the BTS Sector Fast Fading Factor field of the configuration pane to set fast fading profile for a selected BTS Sector channel The user may choose one of the following fast fading profiles Rayleigh fading The signal strength from the BTS to a mobile group moving within the area will be calculated from the free space path loss propagation model modified by a random value determined by the Rayleigh distribution Rician fading from factor K 1 up to factor K 50 The signal strength from the BTS to a mobile group moving within the area will be calculated from the free space path loss propagation model modified by a random value determined by the Rician distribution with the corresponding K factor No Fading The signal strength from the BTS to a mobile group moving within the area will only be calculated by the free space path loss propagation model lt 2005 gt Qosmotec Software Solutions GmbH Objects 55 It is possible to overlap fast fading areas In this case always the strongest fading profile applies Rayl
85. t from the menu bar File gt Open Table File from Disk or click on the open table file button a in tool bar The open table file dialog appears Unlike in the open scenery dialog only the file system of the users own computer is shown Select table file and click open lt 2005 gt Qosmotec Software Solutions GmbH 78 Qosmotec Air Interface Simulator User Guide BA testfilehag1 The open table file dialog To load a table file from database select from the menu bar File gt Open Table File from Database or press the load table file button b The Load table file from database dialog appears Select the table file and click Load Load table file from database Ha x Name Testien Cancel The Load table file from database dialog The user specified settings of the table file are displayed in table text pane below the tool bar lt 2005 gt Qosmotec Software Solutions GmbH Table file view 79 E Table file view G lz 13 I i fe 23 ee za 2j 31l 32 33 oe BE aha riea e Test pane ofthe lt Jz table file view The Table file view window Below the table text pane there is a graphic view of the settings displayed in the table graph pane One graph for each MG is displayed and one line for each BTS Sector in the same color as in the scenery Graphic view of the user specified settings User specified time stamp Time scale in ms
86. t such as hills tunnels and buildings In these configurations the movement of mobile phones is tracked and the signal strength between mobile phones and base stations sectors is adjusted accordingly As a result AIS can create realistic simulations of handover and fast fading situations Because these configurations are computer controlled they can be saved and reused and run automatically with minimal support from testers Note AIS creates the environmental conditions for handovers but it does not enforce handovers That is the task of the mobile network AIS does not perform the test calls during which handovers are expected to occur Testers perform handover tests either by controlling the mobile keypad manually or by using an automatic callgenerator 1 2 The AIS system components The AIS system consist of the following hardware and software components The subrack The attenuator modules The AlS server The AIS resource manager The AlS switch matrix AIS client lt 2005 gt Qosmotec Software Solutions GmbH Qosmotec Air Interface Simulator User Guide 1 2 1 1 2 2 The Subrack The Qosmotec Air Interface Simulator consists of both hardware and software components The hardware resides in a 19 metal case termed Subrack fitting up to two drawers with connectors for four base stations and four mobile station antennae each On the backside of the subrack data network fast Ethernet connection and power supply
87. th direction Channel Channel 1 bi Frequency 21 AU MHz Pattern File DEMO Main Bear fs Deg The Main Beam input box in the channel field in the configuration pane Configure contour lines Each BTS Sector channel is surrounded by contour lines displaying the signal loss according to the frequency defined for the connected BTS Sector channel A Contour Line is a circle of equal attenuation level in the AIS GUI The contour lines show different levels of equal attenuation up to an attenuation level of 95dB The contour lines appear in steps up to the maximum contour line Contour lines are not intended to show the complete area covered by a base station sector Coverage continues beyond the outermost contour line lt 2005 gt Qosmotec Software Solutions GmbH 34 Qosmotec Air Interface Simulator User Guide Contour Lines The contour lines of a BTS Sector The user may change the range and step width of the displayed contour lines To modify the range of the maximum attenuation level shown by the contour lines of a BTS Sector channel select the BTS Sector channel and fill in a value between OdB and 95 dB into the up to input box in the Channel field of the configuration pane To edit steps fill in a value between 1 and the maximum Contour Line into the in steps input box in the channel file of the configuration pane Channel Frequency 2150 MHz Pattern File Omridirectional
88. the current scenery view are bold printed in the MG pane Mobile group allocated by Tester 1 The mobile group pane To run a MG it needs to be allocated meaning a certain user reserves it Once the MG is reserved by a certain user it cannot be accessed by other users To run a MG it also needs to be connected to a trail or a random walk area It is possible to connect several MGs to the same Trail Random walk area In this section it is explained how to Add mobile groups to the map Allocate mobile groups Connect mobile groups to a trail or a random walk area lt 2005 gt Qosmotec Software Solutions GmbH 36 Qosmotec Air Interface Simulator User Guide Fix the attenuation value between a mobile group and a BIS Sector Delete mobile groups 3 3 1 Add MG to map Select a mobile group from mobile group pane Place the mobile group on map by drag and drop Mobilegnoup Mar Position Mobile group added to map To change the position of a MG either drag the MG to a new position within the Map or fill in new coordinates in the input boxes of the Position field of the configuration pane Mobilegroup Hame MG 1 Connected to i Position y E30 meter ie E43 meter The Position fields of the mobile group configuration pane 3 3 2 Allocate MG on server To allocate a MG select the MG and select Allocate on server from the MG menu or select from the menu bar Objects gt
89. the BTS pane 7 5 Running a simulation Prerequisite to run a simulation in Prediction Profile Mode is that at least one Prediction Profile is assigned to a base station After that that prediction is displayed in the Prediction Profile View which can be used in the same way as the Scenery View All other objects except base stations can be placed anywhere in the simulated environment as described in the objects chapter Simulations can be started as described in the chapter Running Sceneries A mobile group running on a trail in Prediction Profile Mode Note To receive the correct Rx Levels on the mobiles connected to AIS as they are displayed in the Prediction Profile View it is necessary to calibrate the server by an AIS administrator before starting a simulation 8 AIS Administration GUI The Administration GUI displays the AIS setup and the licensed features and enables users with administrator rights to Configure the mobile groups and base stations Administrate users of the AlS system and their access rights Calibrate the AIS server according to HF measurements on the hardware 8 1 Open Administration GUI To start the Administration GUI select lt 2005 gt Qosmotec Software Solutions GmbH 86 Qosmotec Air Interface Simulator User Guide 8 2 Start gt Program Files gt Qosmotec gt AIS gt Air Interface Simulator Administration The login dialog opens The mechanism to log
90. tueuoneumeaueaaats 97 13 Bad resolution of table file graph sssnnnusnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn mnnn 99 Index 100 lt 2005 gt Qosmotec Software Solutions GmbH Introduction to AIS 5 1 Introduction to AIS 1 1 About AIS The Qosmotec Air Interface Simulator AIS is a tool which simulates essential effects of signal propagation through open space such as the free space path loss slow or fast fading on a mobile radio link between mobile terminals and the network infrastructure As the name suggests the tool shall be used in a laboratory environment to simulate aspects of the air interface that do not occur in cabled configurations but which are of utmost importance for network or terminal validation It is thus aimed at infrastructure or mobile equipment manufacturers or network operators that are performing end to end tests ina controlled laboratory environment It can be applied to tests of network as well as terminal equipment To simulate the air interface the AIS hardware uses signal attenuators that are regulated by computer to control the individual radio paths between base stations sectors and mobile phones AIS can provide up to 32full bandwidth GSM GRPS or UMTS radio paths in one 19 inch metal enclosure A graphical user interface GUI enables testers to create configurations of base stations sectors mobile phones and other elements of a natural environmen
91. ues are not taken into consideration there Attenuation RxLevel graph The attenuation or the received RxLevel between a MG and the BTS Sectors can also be shown in a graph To show an attenuation graph select MG and select Show Attenuation RxLevel Graph from the MG menu lt 2005 gt Qosmotec Software Solutions GmbH Running sceneries 69 E Attenuation Graph MG 1 0 Attenuation raph J Ofap BTS Sector Ar Sector 1 Mixed Mixed 20 Fill Sector 4 Mixed The Attenuation Graph This window shows a graph for each BTS in the Scenery Map view The displayed time sector can be varied from 2 seconds to 1 hour by activating the respective Time resolution button from the toolbar or by selecting the time resolution from the View gt Time period menu The user can toggle between displaying the attenuation values that are set by the AIS server and the actual Rx Levels that are received by the connected mobiles For this select View gt RxLevel Values or View gt Attenuation Values respectively or click the Att RxLevel Button ij from the graph view toolbar In order to show the correct Rx Level values it is necessary that the AIS server is correctly calibrated The graph displays the settings on the AIS server per second The visibility of fast fading effects in the graph can be switched on and off by activating deactivating the Fast Fading Effect button or by selecting View gt Show Hid
92. ur lines Up to fao dE 5 dE in step The configuration pane of a BTS Sector Note Any changes concerning frequency BTS pattern files direction of the Main Beam and contour lines become only effective for the channel selected 3 2 3 4 Change Frequency Select BTS Sector channel Fill in a value between 800MHz and 2500MHz into the Frequency input box in the Channel field in the configuration pane Channel Channel 1 Frequency 2 W IHz The Frequency input box in the channel field in the configuration pane lt 2005 gt Qosmotec Software Solutions GmbH Objects 33 3 2 3 5 3 2 3 6 3 2 3 7 Assign a BTS Pattern File to a BTS Sector channel To assign an Antenna Pattern from the database to a channel select the channel then select the Antenna Pattern from the pick list in the Pattern File box in the Channel field in the configuration pane Channel Channel 1 x Frequency 21 AL HMHz Fatter File ivtatall tates tm a One TEED TEE Contour lind DEMO Up to fan dE in steps 5 dB The Pattern File Box of the Channel field in the configuration pane Change the direction of the main beam To change the direction of the main beam of a BTS Sector channel select the channel and fill in a value in the Main Beam input box and press Enter The main beam will be turned clockwise for as many degrees as filled into the Main Beam input box Zero degrees means nor
93. user will be shown in the blocked by column of the BTS Sector pane Exclusive Reservations will be kept up also when disconnecting from the AIS server and can be removed only by the user who has reserved it or by an administrator Configure BTS Sector The user has the following possibilities to configure a BTS Sector Add BIS Pattern files Load BTS Pattern files to database Select the BTS Sector channel Change the frequency Assign BTS Pattern files to a BITS Sector channel Change the direction of the main beam Configure the contour lines Add BTS Pattern files A pattern file is a text file describing the change of attenuation according to the radiation pattern of an antenna This file contains the changes in attenuation when deviating from the main beam for x degrees for a full 360 scale pattern AlS currently supports horizontal BTS Patterns To create a pattern file open any text file editor lf a pattern file shall apply fora BTS or one BTS channel it has to be of the following format Type NAME in in the first line Enter a space character and type the name of the antenna pattern lt 2005 gt Qosmotec Software Solutions GmbH Objects 29 Type FREQUENCY in the second line Enter a space character and type in a value for the frequency of the antenna pattern in MHz Type GAIN in the third line Enter a space character and type in a value in dBd Type TILT in the fourth line Type COMMENT in the f
94. vailable Horizontal antenna patterns feature not available xo Vertical antenna patterns feature not available xX ndoo areas feature not available Ae level calibration feature available xX Dynamic switch sceneries feature not available x Dynamic switch tabletiles feature not available x Extended B15 properties feature not available x Mult BTS usage feature not available The Information tab of the AIS Administrator GUI 8 3 Mobile Configuration The Mobile Configuration tab of the AIS Administration GUI lists all mobile groups that are served by this AIS server A user with administrator rights is allowed to change the name of the mobile group Changes on the mobile group names must be confirmed by pressing the Apply Button The user will be prompted for saving changes if he leaves this tab or closes the AIS Administration GUI Note A normal user is only allowed to read the settings but not to change mobile group names lt 2005 gt Qosmotec Software Solutions GmbH 88 Qosmotec Air Interface Simulator User Guide 8 4 fg User ais BTS configuration Mobile configuration Ei Information Humber of mobiles 4 Name of mobile MG 1 Properties of mobiles Mobile number The Mobile Configuration tab of the AIS Administrator GUI Base Station Configuration The BTS Configuration tab of the AIS Administration GUI lists all base stations and their properties that are served by this AIS server
95. x Sector 1_ sSector z MG 2 40 43 MG 3 32 45 MG 4 38 44 The Attenuation Matrix view window lf the server calibration feature is activated and the server is correctly calibrated the user can switch between showing attenuations or Rx Levels When switched to Rx Levels the Attenuation Matrix view is replaced by a Rx Level Matrix view lt 2005 gt Qosmotec Software Solutions GmbH Getting started 15 ocenery Logging view This window shows changes and updates to the scenery listed according to the time when they were put into effect Scenery Logging view BTS Sector l4ialia Ikala 143157 I4ialia LSLS Ialay I4 3157 Il4ialia l4ialia Ials Ifl l4ialia Ital Ialia aii BTS Sect BTS Seck BTS Sect BTS Seck BTS Sect BTS Seck O x text Basestation position update Basestation Frequency update Basestation position update Basestation frequency update Basestation position update Basestation frequency update Fast Fading area properties update Trail properties update Trail properties update MobileSroup position update MobileSroup position update hy LOFe 743 1 46 4 42 2 47 dB xiy 3071259 1 49 4 46 2 39 dB xy L07674 1 46 4 42 2147 dE cfhyvrSO7 259 1 49 4 46 2 39 dB The Scenery Logging view window Table file view The table file view is an application of it s own within the AIS It is used to set a user sp
96. xclusive BTS reservation can also be achieved without placing the BTS into the scenery by selecting Exclusive Switch Reservation from the BTS menu BTS Sector blocked by switching exclusive QBTS Sector i Tester 0 BTS Sector 2 Tester 0 BTSs Sector 3 Tester 0 BTS Sector 4 Tester 0 C BTS Sector j Tester 0 BTSs Sector6 Tester 0 BTS Sector 7 iers sector 3 a Delete from map j BTS sector 2 Exclusive Reservation HETS sector 10 Exclusive Switch Reservation QeTS Sector 11 GIBTS Sector 12 Explicit exclusive Switch Reservation in Dynamic Scenery Mode If a base station is reserved switching exclusively it automatically becomes unavailable for other users operating on the same switch matrix Users working on other switch matrices still have full access to the base stations On the other hand base stations that are already in use cannot be reserved switching exclusively Switching exclusive reservations can be cancelled by an AIS adminstrator 5 4 Running Sceneries in Dynamic Mode Sceneries can be drawn with the same objects and started in the same way as in Normal Scenery Mode The only difference is only the signal of the k strongest base stations is actually seen by the mobile group in use The base stations that are currently switched to the reserved BTS input ports are marked with the testers name in the used by column of the BTS Sector pane All base stations placed in the scenery are v
97. y start every MG in the scenery that is connected to a trail RWA and allocated on the server and currently not running The start button in the tool bar is activated if there is at least one MG in the scenery which is connected to a trail RWA allocated on the server and not running Start a single MG by selecting a MG and selecting Start from the MG menu or select Objects gt Mobilegroup gt Start from the menu bar This will only start the selected MG to walk the trail RWA it is connected to Stop Allocate on server De Allocate on server Delete From map Disconnect From Trail Random walk area Connect to TrailfRandom area s00 1000 Show graph of Fast Fading MG menu to start selected MG Viewing the attenuation data The user has the following possibilities to check the attenuation data while running a scenario Attenuation RxLevel matrix view Scenery Logging view Attenuation RxLevel graph lt 2005 gt Qosmotec Software Solutions GmbH Running sceneries 67 4 3 1 Attenuation RxLevel matrix view The Attenuation RxLevel Matrix view window displays the either attenuation or the received RxLevel of each MG in the scenery to all the BTS Sectors in the scenery The displayed values are calculated by the AlS server The data is recorded every second BT S S ector name Aly Attenuation Matrix view OL _ Sector 1 Sector 2 Sector 3 Sector 4 45 45 39 54 Ma i Ma 42 43 4r 45 Ma

Qosmotec Air Interface Simulator User Guide - iLab

Contents

Download Pdf Manuals

Related Search

Related Contents