Troubleshooting Navionics Charts in most Lowrance & Eagle
Contents
1. Troubleshooting Navionics Charts in most Lowrance amp Eagle Classic non HDS Plotters Units with SONAR RADAR SOUNDER FISHFINDER must be set to FULL MAP to read the Navionics charts once the Navionics charting information is pulled up you may change to split screen 1 Press PAGES button once scroll to MAP then down to FULL MAP and press ENTER 2 After the Navionics information is brought up then a split screen can be accessed Steps to bring up the software version of the unit 1 Make sure the unit has the most up to date software version to verify what this is visit www lowrance com or www eaglenav com select DOWNLOADS and PRODUCT SOFTWARE UPDATES Select your GPS unit s model If your unit requires a software update please do not use the Navionics chart to download the software or have the Navionics chip inside the unit when the software is being updated as this will corrupt the Navionics chart and render the card useless a From the chart page press MENU button twice b Scroll to SYSTEM SETUP and press ENTER c Scroll to SOFTWARE INFO and press ENTER d Unit s model and software version will be displayed e EXIT out of all MENUS Some units require a HOT BOOT which means that the unit needs to be turned on and once fully booted up the chip can then be placed in the unit a If the unit has one slot proceed to the next step b If the unit has two slots 1 Drawers with two slots right amp left the ch2. de and press ENTER 5 EXIT out of ALL MENUS 6 If you are physically located in the area you wish to view and the GPS is reading the satellite use the ZIN ZOOM IN amp ZOUT ZOOM OUT buttons for the detailed NM zoom range levels detail for all charts start at 16NM zoom range level 7 If you are not physically located in the area you wish to view use the ZIN ZOOM IN amp ZOUT ZOOM OUT buttons and the ARROW buttons to pan over to the area to view the detailed NM zoom range levels detail for all charts start at 16NM zoom range level navionics com
3. ip should be placed on the left side or slot B ii Drawers with two slots vertically up amp down the chip should be placed on the top slot or slot A Steps to turn on the Navionics information 1 Press MENU button once scroll to MAP CATEGORIES DRAWN and press ENTER a Ensure that the NAVIONICS file has a check mark or X next to it b When NAVIONICS is highlighted menus for the SUB CATEGORIES will appear ensure ALL items have a check mark or an X next to them c EXIT out of the MENU once Steps to bring up the Navionics chart files 1 Press MENU button once scroll to MAP DATA and press ENTER a EARTH MAP DETAILS set to at least MEDIUM b Ensure the POP UP MAP INFO and the DRAW SHOW MAP BOUNDARIES both have a check mark or X next to them 2 Some units will need to have the MAP DATA SET CHOICE set to NAVIONICS to turn on the NAVIONICS OPTIONS section navionics com 3 Scroll to NAVIONICS MAP CHOICE MAP CHOICE and press ENTER a There will be numerous files such as LOWRANCE EAGLE MIAMI DEMO and the files for the Navionics chart i HotMaps will be the state the lake is in some states are split into sections and will have a directional designation before the state for example Michigan is split into 6 areas WMI NV2 SWMI NV2 SEMI NV2 NWMI NV2 NEMI NV2 amp EMI NV2 ii Marine charts will be the code of the area in question GOLD charts have at least 3 different files that cover the area 4 Highlight the co
Download Pdf Manuals
Related Search