INSTALLATION MANUAL:
Contents
1. Horse INSTALLATION MANUAL 068K221 VESPA CIAO HPI Kuilenstraat 97 3960 Bree Belgium lon ition TEL 0032 089 46 74 39 FAX 0032 089 47 33 28 GSM 0032 0495 53 90 21 Email hpi hpi be Website www hpi be To install the universal ignition on a Vespa Ciao first you ll need to mill down the parts indicated with a white arrow to 2mm lower than the center ring red arrow but DO NOT mill down the center ring Sead ga NG MATET a P gt Ei Fa tat a Hi F rd yy LY y T l st gt g aly t ey Nile AAEN i as a ey hv t A A l r A ER ey Horse INSTALLATION MANUAL 068K221 VESPA CIAO HPI Kuilenstraat 97 3960 Bree Belgium lon ition TEL 0032 089 46 74 39 FAX 0032 089 47 33 28 GSM 0032 0495 53 90 21 Email hpi hpi be Website www hpi be 1 Place the piston at 2 to 4 mm before its most upper position OT see image 1 2 Fit the rotor and the stator so that both markings are aligned gt for right rotating on large marking from the left see image 2 gt for left rotating 2 large marking from the right gt see image 3 Attention also mind the position of the HPI Logo on the rotor Don t tighten the screws yet 2 Make sure that the piston is in position and the markings are aligned If necessary make adjustments by rotating the base plate of the stator 4 Tighten all the screws 5 Connections the 3 pole conn2. ector of the stator to the 3 pole connector of the CDI the orange cable from the CDI to the HT coil the HT coil must be attached to the frame for mass together with the black cable the black white cable to the on off switch the optional yellow and yellow blue cables are for selecting a curve e cables loose curve 1 e cables connected curve 2 VvVvVVY OT 2 4mm Image 1 Image 2 right rotating Image 3 left rotating REMARKS gt to gain performance you can try to vary between the 2 to 4 mm setting gt HPI can deliver a switch to put between the optional yellow and yellow blue cables making curve selecting easy gt the optional yellow and yellow blue cables may never come in contact with the frame mass
Download Pdf Manuals
Related Search