Installation and User Manual
Contents
1. and buttons then once the selected temperature is confirmed by pressing Start Stop button You should then confirm the time 0 4 hours then after pressing start stop the robot will start reheating the food at speed at the set temperature and time 19 metos 20 metos e To chop grate pulverize and mount the bowl should be perfectly clean and dry chop grate pulverize and mix the volume of ingredients should never exceed half of the bowl e When you need to chop you should remind that speed is proportional to the hardness of the ingredients while time is proportional to the quantity of the ingredients by chopping e When you are chopping small amounts of food cloves of garlic a sprig of parsley etc you should program speed and introduce the ingredients all of a sudden through the hole in the lid e When you wash the blades dry them very well and if necessary mount the unit to work for a few seconds at maximum speed so that drops of water will step down the inside of the bowl f you must chop harsh ingredients such as almonds hazelnuts chocolate etc set the required speed and the machine second after second will increase its soeed automatically e After chopping very hard ingredients such as ice nuts chocolate etc ALWAYS check that blades are still screwed perfectly e When cooking never exceed the liter and half of ingredients including liquids and solids otherw2. 13 FIOW IO USE THE PRODUCT PROPERLY 21 RECYCLING AND WASTE DISPOSAL 22 TECHNICAL SPE CUR ICM ONS us u su akuspa 22 Please read carefully this manual prior to the first use of the appliance It is fundamental to get the best results out of the product and the highest level of safety metos About the manual This manual contains information on installation operation and maintenance of the equipment and must be consulted as a reference guide Reading this book provides a safe and proper use of the appliance In addition to the information provided with this manual you must comply with local regulations The instruction manual is an integral part of the product and should be kept near the equipment and easily accessible to anyone who makes the installation care and cleaning Symbols In this manual symbols are used to highlight important safety instructions and any warning The instructions must be followed very carefully to avoid any risk of accidents personal injury and or damage to things and people A WARNING This symbol highlights the dangers that might cause injury and or damage if be amp L WARNING Electricity Danger This symbol points out potential electricity hazard 7 This symbol highlights instructions that must be followed to avoid risks damage malfunction and or breaking of the appliance This symbol highlights tips and information that must
3. metos THERMO CUTTER Metos Hotmix GASTRO XL Installation and User Manual 15 12 2014 MG4163993 MG4163995 metos WAIT TEMPERATURE FUNCTION When you get informed that a recipe or a step of it has been completed after reaching a set temperature and you wish to keep the ingredients at this steady temperature for a while you need to use the WAIT TEMPERATURE function HOTMIX PRO is capable to find and keep the wished temperature for the programmed time With this function the initial temperature of the ingredients is NOT RELEVANT therefore you get the same results any time HOTMIX PRO starts the time countdown when the PROGRAMMED temperature has been reached ACCESS TO THE FUNCTION e Press the temperature icon for 3 seconds till you hear a beep e The display will show WAIT TEMP together with the Temperature icon e Set the wished temperature e Press the time icon The display will show WAIT TEMP together with the Time icon e Set the wished time metos MIFORTANT NOTE E u na A 2 CENERALCINEORVA TIIN u u u E 4 WARNINGS U LS O A E ER 5 FREIRA PACKAGE AND STORAGE uuu ua uum u 6 INSIRUCTIONSTOR USE LLL covert u as 6 PRODUCT DESC RP 7 MACHINE DEVICE 8 ACCE e U su 10 CLEA NEN E 12 EO OPERATE
4. both cases the name of the accessory will flow on the display On the next screen the indication OPERATION COMPLETED will appear It will mean that all the necessary operations have been set The indication will stay on for about 3 seconds then a beep will announce the change to the next screen 16 metos In case a recipe needs to be prepared through various steps press the START button to get back to the screen where the number of the step to be stored will be selected Conversely if the recipe has been completed please select the indication END by using the and buttons and then press START To get out from the STORE RECIPE menu and go back to the initial screen RECIPE MANAGEMENT press START if the storage procedure has been completed or MENU if you decide to exit earlier therefore deleting the storage procedure MODIFICATION OF A PRE STORED RECIPE To modify a pre stored recipe Press the MENU button for at least 3 seconds By using the and buttons let the menu words flowing till selecting CHANGE and press the START button Choose the number of the recipe to be modified by using the and buttons then once selected press START to confirm and pass on to the line below Selection of the step to be modified by using the and buttons once the step has been selected please press START to confirm and then pass on to the setting mode screen To set t
5. be followed for the efficient operation of the appliance NOTE Read the instruction manual carefully before using the appliance The manufacturer disclaims any liability resulting from non compliance with these instructions for use The instruction manual must always be kept near the equipment and easily accessible for anyone wishing to consult it We reserve the right to make unannounced changes to improve the technical specifications and or the development of the product Compliance Statement The appliance has been built in accordance with the current standards and the international safety directives metos e Before using the appliance please check that the voltage of the electricity grid corresponds to the one indicated on the label of the device Only connect the machine to an outlet that has a minimum capacity of 10 A and an effective earthing system e The electrical safety of this equipment is guaranteed only if it is connected directly to an AC grounded socket as required by the applicable electrical safety standards The manufacturer cannot be held responsible for any damage caused by a lack of connection to ground the appliance In case of doubt contact a professionally qualified technician e After you ve unwrapped the equipment ensure the integrity of the unit In case of doubt do not use the appliance and contact qualified personnel only e We do not recommend the use of adapters multiple plugs and or extension cords
6. necessary that the machine is cold and that the bowl is first cooled for a couple of hours in the refrigerator If the machine is off but it was not thought to cool the bowl you can do it by grinding ice then take it out from the bowl and proceed with the preparation e In preparations that require long cooking times you may need to add extra liquids Similarly for preparations that require the use of eg tomato sauce please remind that not any soups are the same but they can vary in consistency and therefore in the amount of liquid they contain e For the preparation of dishes with vegetables if you are not satisfied with the amount of cooking achieved by the recipe you can use the personal touch and prolong the cooking for the desired time If you use canned beans instead of dry ones consider that cooking times should be reduced considerably e For the preparation of meat dishes one should consider the importance of the type of meat and the cut used Cooking times of the recipes refer exclusively to the type and cut of meat indicated in the recipes themselves If for any reason you decide to use a different type of meat remember that it will change its cooking times Obviously if you must lengthen the cooking time you must increase the amount of liquid in the bowl while cooking When you program the delayed start of a recipe with rice and liquids broth water milk etc you must keep in mind that over time the rice absorbs the l
7. of the regular program e Press the PULSE button briefly so the job will go from NORMAL to the DISCONTINUED The appearance of the appropriate icon on the display will indicate that the function PULSE is on going TURBO WORK When the unit is operating with the trend of the regular program e Press the button to activate TURBO function TURBO function remains operational until the button is pressed The TURBO is active from the speed 6 through speed 10 The display indicates the function with the flashing icon TURBO SPEED 14 metos MENU a RECIPE GUIDE b RECIPE MANAGEMENT modifying deleting memorizing In order to access the RECIPE GUIDE please insert the SD card in the appropriate compartment placed on the back side of the appliance 3 a Keeping the MENU switch pressed the pre stored recipes programs will be accessed b Keeping the MENU switch pressed for at least 3 seconds the following functions can be accessed modifying deleting storing of one s own recipes only for setting functions Dine programs and the pre stored recipes have been created by our chefs according to their personal taste using ingredients available in our country It is possible that different ingredients and a different personal taste will sort out a different outcome from what expected To this purpose the appliance offers the opportunity to modify the stored recipes and or programs by saving a copy in one s own file User or to s
8. 5 SENON a EEEE A AE g 70 SUSAN EE E E E E u E ET g 85 COCO ea A E g 50 ll E E E E E E A E E T E A E s g 85 Pi K u EEE g 50 G IC CS O ua Du ass g 50 CLEANING The measuring cap can be washed in the dishwasher Bowl 15 The bowl shows three lines to indicate the content level 10 metos A CAUTION when the contents of the bowl arrives to the 3rd line 3lt max the speed 3 is the maximum speed setting When on the contrary the content of the bowl doesn t exceed the 2nd line 1 5 It The maximum speed setting is 10 The maximum capacity must never be exceeded and it is vital that you take it into account for some foods such as leavened dough bread pizza etc During some preparations volume increases furthermore the higher speeds tend to increase the liquid level because of the centrifugal force BOWL S EXTRACTION Ensure that the unit is stopped then press the buttons to open the lid O To stop the engine never open the lid Use only the START STOP switch To remove the bowl please use only the handle CAUTION The bowl may be very hot do not touch it and do not place it on delicate surfaces as they could even be irreparably damaged BOWL S OPENING AND INSERTION Make sure that the appliance is stopped then press the buttons to open the lid Opening the lid automatically sets operational safety that stops the engine and consequently the blades stop tur
9. If is absolutely necessary use one of these devices you must only use single or multiple adapters conform to current safety standards being careful not to exceed the power limit specified in the adapter e The elements of the packaging plastic bags etc should be kept out of reach of children because they are a potential source of danger e This equipment must be used solely for the use described in this manual Any other use is considered inappropriate and therefore dangerous e The manufacturer cannot be held responsible for any damage caused by the equipment when used inappropriately erroneous and irrational and or repaired by unqualified personnel Do not touch the appliance with hands and or feet if wet or damp e Do not remove the plug from pulling the power cord e Do not leave the unit exposed to the weather rain sun frost etc e This appliance is not intended for use by people including children with reduced physical or mental ability or lack of experience and knowledge unless they have been instructed on the use of the equipment by personnel responsible for their security Ensure that children do not play with the appliance e Before carrying out any cleaning or maintenance disconnect the appliance from the mains supply by removing the plug e Never immerse the appliance in the water to clean it e Never mount the blades in the bowl without sealing e Use only the supplied spatula to stir the preparatio
10. absolutely normal and the stabilizers will absorb any oscillation LCD DISPLAY 1 Once the appliance has been switched on the Hotmix PRO logo will appear on the display If the lid of the bowl is open the icon of the lid will switch on and the indication LID OPEN will appear After closing the lid safely the icon and the written indication will disappear while the speed icon will appear with OO digits together with the indication SET SPEED at this point the appliance is ready to be programmed When temperature is being set the thermometer icon will switch on together with the indication SET TEMPERATURE When pressing the CLOCK switch to set time the clock icon will switch on with 00 00 digits and the SET TIME indication will appear The display will show the remaining time slipping by In case of severe fault the spanner will switch on while anything else will switch off The appliance must then be brought to a service center MOTOR CONTROL THERMOSTATS Your appliance is equipped with two thermostats for motor protection one dynamic and one static The dynamic thermostat always intervenes before the static which stops the machine pointing Er 01 The dynamic thermostat in fact make an intelligent control of the motor temperature stopping for a moment if necessary to cool the motor down and finish the recipe before involving the static thermostat When the dynamic thermostat is in ope
11. cap blades and spatula following the procedures described later e Place the unit on a horizontal work surface away from edges and heat sources and out of reach of children e The maximum capacity of the bowl must never be exceeded Introducing excessive quantity could mean spilling liquids and consequently also irreparable damage the unit These failures are not covered by the warranty agreement e Do not introduce hands or fingers into the hole of the lid it could be a potential risk of cutting metos PRODUCT DESCRIPTION 12 22 1 Liquid Crystal Display 14 Stabilizing feet 2 Control Panel 15 Stainless steel bowl 3 SD card compartment 16 Mixing paddle 4 SD card 17 NTC probe 5 Measuring cap 18 Heating element 6 Lid 19 Liquid leaking hole 7 Magnet 20 Blades 8 Flaps for lid opening and closing 21 Blades locking ring 9 Lid gasket 22 Spatula 10 Lid hole Optional accessories 11 Flaps for lid opening and closing 23 Stainless steel basket for steam 12 Power cable cooking 13 Switching ON OFF metos CONTROL PANEL 2 O77 Menu to access to the recipe menu RECIPES RUMHING S TORE CHANGE DELETE to increase or decrease Speed Time and Temperature parameters When and are used as pulse buttons the parameters increase or decrease by one digit If you keep pressing the buttons the parameters will quickly increase or decrease just depending on how long the buttons will sta
12. ck icon which means that we must set again with the and buttons the time we want the machine starts working it must be confirmed by pressing start stop as well Next the display shows the icon of the thermometer if you want to set a temperature always with the and buttons and pressing the start stop button to confirm If you do not want any temperature press the start stop button and skip this step Now the blades icon appears on the display and as above adjust the speed with the and buttons and store the data If you want a speed pulse press the pulse button before storing the data Once you set the last digit of speed you will hear 4 beeps the machine is put on standby the display shows the current time and the clock icon is flashing In this condition the machine waits for the set time to perform the set functions Speeds will be set only up to 3 the temperature will be up to 95 and the time up to 4 hours COMPLETE RECIPE IN MEMORY Once selected a recipe that you want to perform with the delayed start press and hold for 5 seconds the clock button and you will then hear 3 beeps Now the display shows with the first two lines that are flashing they indicate the hour with the and you could just set the time format 0 24 Once you have chosen the time you have to store your data by pressing the button start st
13. e you have to store your data by pressing the button start stop after flashing the second two lines indicate the minutes with the same procedure for storing the hours you now store the minutes Then you must set the time at which you want the appliance getting started with the same system by which you had set the hour earlier In this case the step being part of the chosen recipe starts At the end of it the machine stops and aits for the start of the next step or it beeps while the recipe has been completed WARNING Always check that the ingredients are being introduced in the recommended amount as er the display indication WARNING Failure to maintain the quantity of food could cause serious damage to things and people CAUTION Never leave your appliance unattended during the operations It is possible to check if set data are correct when the machine is in standby with the clock flashing by pressing the start stop button set digits appear in sequence with the appropriate icon When making this operation if you realize that you have set wrong data please press the recipe icon for 5 seconds then you hear 4 beeps and all data settings will be deleted with the exception of the current time FOOD REHEATING For this function there is the program POO in the recipe memory After pressing the START STOP button you ll need to set the temperature ranging from 25 to 65 with the
14. e bowl with a slightly dampened non abrasive sponge Do this only and exclusively when the machine is off and cold Before cleaning the bowl always make sure that the blades are dismantled in order not to run the risk of cutting 12 metos e Place the appliance on a flat surface so that it will be in a stable position e Connect the equipment to the mains voltage e Switch on the appliance by keeping the main switch pressed the display will then switch on automatically and showing the HotmixPRO logo To ensure safety and respect of energy saving if you do not set any parameters after about 5 minutes the unit will shut down setting in standby position and displaying the HotmixPRO logo Just press any key to put the device back into operation SETTING THE FUNCTIONS e Select the icon of the function Use the and buttons to set the digits e Set the functions necessary to make food preparations always use this recommended sequence 1 Temperature 2 Speed 3 Time 4 Start Stop WARNING at the first use it is possible that the device emit a low noise due to the internal stabilization of the joints That is normal and it will disappear in a short time CORRECTION OF DATA SET When working you can change the parameters of speed time and temperature and with the and symbols define the new digits Proceed as follows e Press the START STOP button to stop the appliance e Pr
15. enable the spill of liquids prevent the start of the appliance f the lid is not closed properly the electromagnetic safety device 7 prevents the appliance to start working and the display shows the icon of the bowl with an opening lid e To open the lid press with two fingers on the side flaps 8 and lift them up gt WARNING If there are some liquids in the bowl and the speed is high wait before opening the lid a few seconds so the liquid will come back to their ordinary level to avoid over spilling CAUTION Before you start the appliance please always check that the two side flaps are closed CAUTION Remove the gasket periodically and clean the dirt between the seal itself and the cover CAUTION Take care to correctly reassemble the gasket at its head so that the lid closes well CAUTION Never put the lid in the dishwasher MEASURING CAP 5 The cap has a dual function when fit on the cover it prevents liquid leaking from the lid itself and can be used as a handy measuring cup as well If boiling liquids are present inside the bowl please wait a while before removing the cap it will prevent any puffs of steam Equivalence capacity of measuring cap Water g 85 g 85 SEERE g 75 WI E u u uu 52 g 85 L EEEE IENE OEE NE E A A ANEA EN ait g 85 FOU g 5
16. ess the button corresponding to the parameter that you want to change for the setting e Press the and buttons to set the new digit e Press the START STOP button to restart the unit Z unit will not start without any given set of parameters SPEED CONTROL Selection of the blades speed as follows e Press the SPEED button e Use and buttons to select the required speed The speed set will appears on the display The appliance is equipped with 23 different types of speed Speed from to 10 e Speed from 1 to 10 PULSE e Speed 1E for cooking meat with mixing paddle e Speed 1F for cooking delicate foods with mixing paddle Turbo The speed 0 can be displayed and selected only by setting a temperature first as follows e Press the button with the icon of the thermometer e Select a temperature Use the button to select speed 0 that will appears on the display Set the other parameters and proceed 13 metos TIME Selection of time duration e Press the TIME button e Use and to select the working time The value of time set will be displayed e The range of time varies from 5 seconds to 12 hours e After 60 minutes and up to 12 hours the steps will be 10 minutes at a time unless you use the and with small shots in this case we can proceed from minute to minute Steps of the clock lt 1min 1 5min 5 10min 10 30mi
17. he machine When one wants to use the preparation the machine must be stopped MANUALLY by pressing the START STOP button PERSONAL TOUCH To facilitate the perfect success of the stored recipes you can repeat the last sequence of processing as follows e Press the clock e You will hear a beep e Set a time of your choice e Press the Start In this way the unit will repeat the last sequence with the same speed and the same temperature for the time you set It is very useful for example to give a final touch to food preparations that are not to your liking without the need to reset all the digits again DELAYED DEPARTURE There are 3 ways to operate the machine with the late departure MANUAL PROGRAMMING When the machine is turned on to set the current time press and hold the button clock for 5 seconds till you will hear 3 beeps Now the display shows with the first two lines that are flashing they indicate the hour with the and buttons you could just set the time format 0 24 Once you have chosen the time you have to store your data by pressing the start stop button after flashing the second two lines are to indicate the minutes with the same procedure you store the minutes Then you must set the time you want the appliance get started and with the same system you set the hour Once you confirm the information with the START STOP button the display will show the clo
18. he new operating speed select the digit with the and buttons and possibly the PULSE function by pressing the PULSE button Once the word SPEED has been selected choose the new digit with the and buttons then confirm by pressing the START button and pass on to the subsequent screen To set the new operating time select the digit with the and switches Once selected the word TIME choose the new digit with the and switches and confirm by pressing the START switch then pass on to the subsequent screen To set the new operating temperature choose the digit with the and buttons Once selected the new the word TEMPERATURE choose the new digit with the and buttons and confirm by pressing the START button then pass on to the next screen To set a new accessory position on the word referred to the accessory to be selected with the and buttons and confirm by pressing the START button To confirm the new set data select YES with the and buttons and confirm by pressing the START button then pass on to the next screen Conversely if you do not want to confirm the new set data select NO with the and buttons and confirm by pressing the START button to go back to the screen that enables to repeat any operation required to change the parameters DELETE OF A PRE STORED RECIPE To delete a pre stored recipe p
19. ine The storage of a recipe should be made by dividing it into steps starting from 1 upwards using the and buttons Then confirm with the START button and then go ahead to the subsequent screen of setting modes If when storing each step an already assigned number will be chosen a beep will be heard after 3 seconds and the display will go back automatically to the previous screen to enable the insertion of the correct number Once on the screen of the setting modes select the SPEED digit with the and buttons and the PULSE switch as well if required then press START to confirm Now go the TIME setting mode Please select the digits with the and buttons confirm with the START button and then go to the next setting mode So we get to the TEMPERATURE setting please select the digit with the and buttons confirm with the START button and then go to the next setting mode that is the selection of the accessory to be used Selection of the ACCESSORY please go the requested accessory by the and buttons then confirm with the START STOP button All the set data are to be confirmed or not with the subsequent screen by using the buttons to get positioned over YES or NO and then pressing the START STOP button If the data are confirmed then the subsequent screen will appear otherwise it will go back to the initial screen In
20. iquid and therefore the cooking time should be reduced e After cooking wait a moment before opening the lid and take care of possible puffs of steam You could burn yourself 21 metos fthe unit is used improperly eg by putting bigger amounts of an ingredient than those provided by the recipe or more than the appliance can accept the motor tends to overheat and thus in order to protect it the intervention of a thermal protection will block the motor until it will cool down Once cold the unit will work again If after preparing a hot recipe you want to switch to cold recipe in order to speed the cooling times it is recommended to let the appliance work at speed 10 for about 2 minutes Do not lift or move the unit by grasping the handle When the device stops working and must be scrapped you must ensure that its disposal will cause the least environmental damage possible in accordance with the following European legislation 2002 96 EC 1 When a product is given the symbol of a garbage crossed out it means that the product is covered by the European Directive 2002 96 CE 2 All electrical and electronic products should be disposed separately from the municipal waste collection and being collected within specific plants designated by the government or local authorities 3 The proper disposal of obsolete equipment helps to prevent possible negative consequences on human health and the enviro
21. ise run the risk that the contents of the bowl could overspill While the unit is in operation only use the supplied spatula to loosen the ingredients from the sides of the bowl or mix them e To make preparations with boiling milk always remove the cap from the cover while cooking After cooking do not open the lid immediately but let the blades turning without any temperature set until the milk has gone off the boil before opening Do not place the unit near heat sources stove oven etc e When you want to move the equipment you need to lift it and never drag it while working you may run the risk of damaging the functionality of the machine e Before carrying out any recipe please read all the ingredients to prepare it properly and have them at hand and strictly follow the sequence of implementation When recipe calls for ingredients that are a cube or diced it is necessary to prepare them this way otherwise they do not mix well with other ingredients in the recipe The cubes should have the side of about 1 1 5 cm while the diced should have the side smaller than 1 cm In all preparations of fruit juices sherbets jams add a peeled lemon in vivo ie without white skins seeded and cut into small pieces The lemon will act as an antioxidant and will enhance the colour and flavour of the preparation e For the preparation of ice creams and sorbets and to assemble the cream it is
22. lease proceed as follows Enter the RECIPE MANAGEMENT menu by keeping the MENU button pressed for 3 seconds Use the and buttons to let the menu words flow then position on DELETE and confirm by pressing the START button Select the number of the recipe to be deleted by using the and buttons then press START to confirm and pass on to the line below Position on YES with the and buttons and confirm by pressing the START button The display will show the indication SURE DELETE then get positioned on YES with the and buttons and give confirmation by pressing the START button Then the subsequent screen OPERATION COMPLETED will appear Conversely by selecting NO the program will be exited B To store a recipe through the PC writing even ingredients and quantities or to modify or delete a recipe from the SD card through the PC download from the SD card the software located in the folder CreatorPRO and install it following the instructions 17 metos SPECIAL FUNCTIONS WAIT TEMPERATURE FUNCTION This function particularly useful for pastry preparations allows the machine to reach a temperature that has been pre determined by the user Once reached this temperature the recipe has been completed e g Custard but the WAIT TEMPERATURE function enables to keep mixing the just completed preparation requiring that a TIME digit below 04 00 hours is being set into t
23. ly from the machine into the USER file it is possible to store number and name of a recipe number of the steps required to complete it and the operating parameters speed time and temperature It is not possible to write the ingredients and the quantities if you wish to include these infos please proceed to point B B From the PC after inserting the SD card into the appropriate card reader through the program into the CreatorPRO file it is possible to store number and name of the recipe number of the steps required to complete it and the operating parameters SPEED TIME and TEMPERATURE besides writing ingredients and related quantities A To store a recipe directly from the machine Keep the MENU button pressed for at least 3 seconds Use the e buttons to let the Menu words flowing till selecting STORE and press the START button It is necessary to select the number of the recipe to be stored by letting the numbers flowing with the and buttons Confirm the selected number with the START button in case the selected number is already assigned the indication ATTENTION RECIPE EXISTING will appear and it will fade away after 3 seconds a beep will be then heard and the display will go back to the previous screen in order to enable the selection of another number In case the selected number will be available please confirm with the START switch then go ahead to the subsequent l
24. n 30 60min gt 60min fino to 12 hours Every 5 sec Every 15 sec Every 30 sec Every 1 min Every 5 min Every 10 min Every 10 min with option of min in min The display shows the remaining time of food preparation The unit stops automatically when it reaches the selected time and emits a beep TEMPERATURE Temperature selection e Press the TEMPERATURE button Use and buttons to select the required temperature The display will show the set temperature If you do not set any temperature as the machine has to work cold the display will show two horizontal lines to indicate that there is no heating FAm temperature range varies from 25 C 77 F to 190 C 374 F Prepare first all those preparations that do not require the temperature setting so you do not have to wait for the unit to cool down for subsequent food processing EXAMPLES OF WORK NORMAL WORK e After introducing the ingredients into the bowl close the lid properly e Press the SPEED button then use the buttons and to select the required speed e Press the TIME button and then use the buttons and to select the required time e Press the temperature button if necessary then with the and buttons please select the required temperature e Finally press the Start Stop button to operate the appliance PULSE WORK work stopped When the unit is operating with the trend
25. ning Insert the bowl making sure that sounds perfectly in their seats otherwise the safety device will prevent the motor starting before to insert the bowl check that the blades are securely locked canon Before cleaning the glass always make sure that the blades are dismantled in order to avoid the risk of cutting L lucane The bowl can be washed in the dishwasher Consider however that the detergents used in dishwashers are very aggressive and that after some time the grip of the bowl s handle could become a little discoloured BLADES 20 MOUNTING THE BLADES Hold the blades with one hand insert it into the hole on the bottom of the bowl with the other hand and carefully tighten the locker on the bottom of the bowl turning it clockwise To take out the blades please turn the locker anti clockwise and make the opposite operation to re mount the blades vanne The blades have sharp surfaces be careful while handling 7 After you have crushed harsh elements nuts carrots etc ALWAYS tighten the locker 2 check that the blades are equipped with the gasket and that the gasket is in good condition otherwise it will be possible that liquids come out through the discharge pipe on the basis of the appliance 11 metos SPATULA 22 The spatula allows to stir the ingredients contained in the bowl even with the blades in motion in total security because its special shape makes it im
26. nment 4 For more detailed information the disposal of obsolete equipment please contact the municipality the waste disposal service or the shop where you purchased the product Power supply 110 240 V 50 60Hz Motor power 1800 W Heater power 1500 W Total power 3300 W Bowl Stainless Steel Max Capacity 3 litres Overall dimensions H x W X D 396 mm x 320mm x 420mm Weight Kg 18 22 DECLARATION OF COMPLIANCE We declare that the product HotmixPRO Gastro is compliant to the Directive 2006 42 CE The technica standards reference applied are the following EN 55014 1 EN 55014 2 EN 61000 3 2 EN 61000 3 3 EN 50366 EN 60335 1 solo Art 19 11 4 EN 60335 1 2002 EN 60335 1 A1 2004 EN 60335 1 11 2004 EN 60335 1 A2 2006 EN 60335 2 15 2002 EN 60335 2 15 A1 2005 EN 60335 1 1994 EN 60335 1 11 1995 EN 60335 1 1 1996 EN 60335 1 A13 1998 EN 60335 1A14 1998 EN 60335 1A15 2000 EN 60335 1A2 2000 EN 60335 1A16 2001 EN 60335 2 64 2000 EN 60335 2 64A1 2004 EN 12852 Modena 12 01 2012 VITAECO S r l Cristiana Managing Director Vitaeco S r l Bazzini 241 41422 Modena Italy info hotmixpro com kitchen intelligence
27. ns e Do not ever cook with the empty bowl e Never place the entire unit under the tap to introduce water into the bowl e Never lift the appliance by holding the handle of the bowl e Do not cover the inlet and ventilation openings on the rear of the unit In case of breakdown or malfunctioning turn it off and do not open it For repairs contact only a service facility authorized by the manufacturer and ask the use of original spare parts Failure to comply with this rule may jeopardize the safety of the appliance e When you decide to permanently delete the device after removing the plug from the socket it is recommended the cutting of the power cord If the power cord is damaged it must be replaced only at a service centre authorized by the manufacturer so as to prevent any risk When not using the unit disconnect the plug from the mains and turn off the switch Do not leave the device connected to the mains if it is not necessary e The unit cannot be used after a fall or in case of imperfections or losses Before returning to use it will need to be brought to an authorized service centre e Keep this instruction manual because it may be necessary to consult it in the future This device complies with European Community rules in relation to electromagnetic compatibility metos Shipping control Check shipping claims regarding damage caused by transport immediately after receipt In case of apparent damage accept
28. o show the first ingredient of the first step to be introduced into the bowl The display shows the total number of the steps for each recipe as well e g 1 3 Once the ingredients of the first step have been introduced into the bowl press START and the machine will operate e At the end follow the same procedure with the second step till the recipe will be completed The display shows the remaining time speed temperature and the accessory used e At any stage of each operations the icons will appear on the display thus indicating which function is working like when the machine is being operated manually At the end of the last operating step The machine will emit a continuous beep like at the end of any manual preparation When a stored recipe is being created it is fundamental that the ingredients are being introduced exactly in the same order as per the indications given on the display or the recipe guide ATTENTION Never let the machine unattended while working 15 metos b Press the MENU button for at least 3 seconds By using the and buttons select the file as follows DEFAULT pre stored recipes and programs or USER personal recipes Confirm by pressing the Start button This menu includes the following activities Storage of a recipe Modification of a pre stored recipe Delete of a pre stored recipe STORAGE OF A RECIPE There are two ways to store one s own recipe A Direct
29. op after flashing the second two lines indicate the minutes to the same procedure time you store the minutes 18 metos Then you must set the time when you want the appliance will get started with the same system with which he had set the hour earlier Once you set the last value you will hear 4 beeps the machine is put on standby the display shows the current time and the clock icon is flashing In this condition the machine waits for the set time to perform the set function In this case the first step of the recipe selection starts then once finished the machine stops and waits for the start for the next step CAUTION Always check that the ingredients are introduced in the recommended amount from the display WARNING Failure to maintain the quantity of food could cause serious damage to things and people CAUTION Never leave your appliance unattended during the operations SINGLE STEP OF A RECIPE When you pick a recipe of which you want to make a single step with the delayed start first you need to do the above steps in the ordinary way then once the last step is over and before you give the start to the next step press and hold for 5 seconds the clock button and you will hear 3 beeps Now the display shows with the first two lines that are flashing they indicate the hour with the and buttons you could just set the time format 0 24 Once you have chosen the tim
30. possible to get in contact with the blades themselves It also enables when necessary to remove ingredients from the walls of the bowl in one processing step and the next vanne DO NOT use other tools spoons or wooden spoons etc with the blades in motion CLEANING The spatula can be washed safely in the dishwasher MIXING PADDLE 16 The mixing paddle helps foods and liquids to get properly blended To insert the mixing paddle please match the hole at the bottom of the device with the upper pin linked to the blades then push down till you hear a click To remove the mixing paddle pull it upward to remove it from the blades pin The time of usage of the mixing paddle is linked to the duration of the food preparation warns DO NOT use the mixing paddle at speeds higher than 4 at speed TURBO DO remove the mixing paddle when the glass is still hot Wait till the mixing paddle cools down before removing it from the bowl Clean the appliance with a damp cloth and neutral detergent avoid cleaners that result in being too CAUTION Do not completely submerge the unit in water for cleaning CAUTION Do not clean the appliance with a jet of water periodically disassemble the lid s gasket and remove the dirt that there might be between it and the lid take care to correctly reassemble the gasket at its head so that the lid closes correctly the inside of th
31. ration the word PULSE will be displayed and you can easily finish the preparation If however an excessive amount of ingredients or a too thick preparation takes place which can cause a strain upon the appliance with consequent overheating of the motor the static thermostat comes into operation stopping the motor immediately The display shows Er 01 Wait a few minutes before the appliance cools down and when the motor has reached an acceptable temperature the machine is automatically ready for use again To do this you have a forced air cooling fan that also works when the machine is off SD card 4 The machine is equipped with an Sd card placed inside of a comportment on the back of the machine To access it unscrew the screws Inside the SD card there are Folder DEFAULT it contains programs recipes and specially stored functions Folder USER it is suited to store personal recipes Folder CreatorPRO it contains the software be installed the PC for storing modifying and deleting the recipes and instructions to do it Folder Recipebook_Gastro XL with the complete recipe book of pre stored recipes metos COVER 6 e Mount the cover by pressing the two side flaps 8 and exerting a little pressure It will be very easy The lid has a gasket 9 which must always be mounted correctly to avoid the risk of leaking fluids The incorrect position of the gasket 9 could
32. the shipment only under reserve Please note the extent of the damage on the transport document Packaging Do not throw away the packaging of your appliance because it could be useful for storage when transported or in case of damage for the return to centre The inner and outer envelope must be completely removed from the equipment before installing it PLEASE NOTE In case you should bring the machine back to your dealer please use exclusively the original package as any break or fault caused by transport damages due to lack of the original package could be charged to you If you want to throw away the package please consider the recycling regulations in your country Check the equipment and the presence of all components In case of missing parts please contact our customer service immediately Storage Keep the packaging closed till it will be installed taking into account the marking on the packaging The packaging must be stored taking into consideration the following Do not store it outdoor Keep in a dry place away from dust Do not expose to corrosive elements Do not expose to direct sunlight Avoid mechanical shock and vibrations In case of prolonged storage gt 3 months make sure that the state of the package and all its parts are in good condition If necessary renew the packaging e Before using the appliance for the first time thoroughly clean all the accessories such as bowl lid measuring
33. tore own recipes according to the personal taste and the ingredients available in one s own country a Keep the MENU button pressed and by using the and buttons select the file you want to access to DEFAULT pre stored recipes and programs or USER personal recipes Confirm by pressing the Start button Regardless of the selected file please proceed as follows to create a prestored recipe program e By using the and buttons select the number of the chosen program For seeing the complete list please go to www hotmixpro com at the RECIPES AND SPECIAL PROGRAMS section The consultation of this section will enable you a to print the full text of recipes including any final stages of processing b to always find the updated list in real time of any recipe and program available and possibly their updated version which will be possible to download on your SD card e Then press the START STOP button the number of the program recipe will appear on top with the title flowing INGREDIENT_ OF _ where 000 is the first ingredient and the number after the bar show the total quantity of ingredients of a specific recipe and the name and the quantity of the first ingredient Within some programs neither the ingredients not the quantities are being specified e By using the button all the ingredients needed for a recipe can be displayed one by one e At the end press again the START STOP switch t
34. y pressed PULSE TURBO Turbo By keeping the switch pressed it is possible to go from speed 6 as a minimum to the maximum speed Turbo speed till the switch is being released Pulse to get a Pulse functioning at any speed from 1 to 10 with the exception of speeds 1E and 1F Clock to set the operating time up to a maximum of 12 hours Start stop it is the on off switch for any function Thermometer to set the operating temperature as from 25 C 77 F up to 190 C 374 F HEATING ELEMENT 18 Electrical device for heating the bowl while cooking Speed To set the operating speed with 12 different options WARNING do not heat the bowl when empty do not touch it it could cause burns NTC PROBE 17 It is the element enabled to control the temperature set 8 metos LIQUID LEAKING HOLE 19 Whenever some liquids should come out of the bowl they will go out from the appliance base throughout this hole 7 check that the hole is not blocked periodically the even partial blockage of this hole could cause serious damage in case of liquid leakage out of the bowl STABILIZING FEET 14 The four elastic feet at the base of the appliance work as shock absorbers and stabilizing elements of any oscillation when the appliance is operating WARNING it may happen that depending on the food preparation the appliance could make visible oscillations this is
Download Pdf Manuals
Related Search