Home

User Guide

1. 63 ECSIOIE XESCIOD e 63 Ehable Disable Code 939 EEE 63 Check 64 65 65 Ehable Disable A 65 Check DIE VENEN OT ee M cs 66 E eztei ARE USER 67 e 67 IES SOV tt P 67 Check IgE di OE ee 68 ASA Lesko uL E E 69 Restore Factory Deraulls soo po ER IMEEM UE EM 69 Enable Disable 69 Check Digit 70 CE 71 Restore Factory 71 9 8 e Era RE m 71 Transmit Application Identifier 07 2 71 EE EE Edu dE E IMEEM er 72 ii IIIA 72 Bi aurea 72 Transmit Application Identifier 07 2 72 73 Restore Factory Deraults anne A 73 Enable Disable 55 73 74 RESOL RCO gt
2. BEAT WFFD9D8 Baud Rate 115200 WFFD9DO 5 Baud Rate 1200 J WFFD9D2 Baud Rate 4800 J WFFD9D5 Baud Rate 19200 u WFFD9D7 Baud Rate 57600 Chapter 11 USB Interface When the scanner is connected to a host device through its USB interface USB HID KBW is enabled by default You may switch to HID POS or USB COM Port Emulation by scanning the appropriate barcode below HID POS W030D03 HID POS USB COM Port Emulation W030D02 USB COM Port Emulation USB HID KBW W030D01 USB HID KBW 22 Three methods of input are provided for USB HID KBW Standard Keyboard Function Key Mapping Emulate ALT Keypad Standard Keyboard WO66000 Standard Keyboard Function Key Mapping When Function Key Mapping is enabled function character 0x00 Ox1F are sent as ASCII sequences over the numeric keypad 1 CTRL Make 2 Press function key Refer to the ASCII Function Key Mapping Table on the following page 3 CTRL Break W066002 Function Key Mapping 23 ASCII HEX ASCII Function Key Mapping Table Function key ASCII HEX Function key Sr EIE _ ek I d 0 24 25 Emulate ALT Keypad When Emulate ALT Keypad is enabled any ASCII character 0x00 OxFF is sent over the numeric keypad no matter which keyboard type is selected 1 ALT Make 2 Enter the number corresponding to the ASCII charact
3. Newland 2 Y Newland Taiwan Inc NLS FR20 Series Fixed Mount Barcode Scanner User Guide Disclaimer 2015 Fujian Newland Auto ID Tech Co Ltd All rights reserved Please read through the manual carefully before using the product and operate it according to the manual It is advised that you should keep this manual for future reference Do not disassemble the device or remove the seal label from the device Otherwise Fujian Newland Auto ID Tech Co Ltd does not assume responsibility for the warranty or replacement All pictures in this manual are for reference only and actual product may differ Regarding to the product modification and update Fujian Newland Auto ID Tech Co Ltd reserves the right to make changes to any software or product to improve reliability function or design at any time without notice Besides the information contained herein is subject to change without prior notice The products depicted in this manual may include software copyrighted by Fujian Newland Auto ID Tech Co Ltd or a third party The user corporation or individual shall not duplicate in whole or in part distribute modify decompile disassemble decode reverse engineer rent transfer or sublicense such software without prior written consent from the copyright holders This manual is copyrighted No part of this publication may be reproduced or used in any form without written permission from Newland Fujian Newland
4. C Humidity 5 95 non condensing Certification FCC Part15 Class B CE EMC Class B Chapter 6 FR20 Scanner Scan Window LED Indicator Data Port Trigger Chapter 7 Wiring 1 If your scanner is equipped with an RS 232 interface 1 Plug the supplied cable s RJ45 connector into the data port on the scanner 2 Plug the cable s RS 232 connector into the RS 232 port on PC 3 Plug the power adapter into the cable s power jack 4 Connect the power adapter to a power outlet After 0 5s the scanner will be powered on indicator beep and red LED and then automatically enter standby mode 2 If your scanner is equipped with a USB interface 1 Plug the supplied cable s RJ45 connector into the data port on the scanner 2 Plug the cable s USB connector into the USB port on PC 3 After 0 5s the scanner will be powered on indicator beep and red LED and then automatically enter standby mode Chapter 8 Scanning Instructions Reading a Digital Barcode off Mobile Phone 1 Place the mobile phone screen as close as possible to the scan window and present the barcode to the center of the window 2 For a successful read the scanner will beep with its LED turning from red to green After sending the data to the host it will enter standby mode Reading a Barcode Printed on Paper 1 Place the paper as close as possible to the scan window and present the barcode to the center of
5. Disable 1D Symbologies WFFD984 Disable 1D Symbologies Enable 2D Symbologies WFFD985 Enable 2D Symbologies Disable 2D Symbologies WFFD986 Disable 2D Symbologies 30 Code 128 Restore Factory Defaults WFFD990 Restore the Factory Defaults of Code 128 Enable Disable Code 128 WO01 1601 WO01 1600 Enable Code 128 Disable Code 128 31 UCC EAN 128 GS1 128 Restore Factory Defaults WFFD991 Restore the Factory Defaults of UCC EAN 128 Enable Disable UCC EAN 128 WO01 1701 011700 Enable UCC EAN 128 Disable UCC EAN 128 32 AIM 128 Restore Factory Defaults WFFD992 Restore the Factory Defaults of AIM 128 Enable Disable AIM 128 W101610 W101600 Enable AIM 128 Disable AIM 128 33 EAN 8 Restore Factory Defaults WFFD994 Restore the Factory Defaults of EAN 8 Enable Disable EAN 8 WO01 1301 011300 Enable 8 Disable EAN 8 Transmit Check Digit EAN 8 is 8 digits in length with the last one as its check digit used to verify the integrity of the data W041304 W041300 Transmit Check Digit Do Not Transmit Check Digit 34 2 Digit Add On Code An EAN 8 barcode can be augmented with a two digit add on code to form a new one In the examples below the part surrounded by blue dotted line is an EAN 8 barcode while the part circled by red dotted line is add on code I 12344567 LE pe pe la e es e m W1
6. E EEEE 74 Enable Disable 9 74 PVA TO Sa Ple T 74 Data Mali zen LEER el ee eee 75 Restore Factory 75 SAAD gizo Cl a 75 Mirrored 2er 75 Rectangular 76 MI M MEINE mU INE MUSEI UNE UM UM ME MUSEUM TEM M 77 Restore Factory Derallts unosi emm tendo tou 77 DIS DEOR COOC EE 77 Un HK EM NM MCI M KM M M C MEE 77 Chapter 13 Data Formatting AAA 78 ia ea ne ee nee ere nee re toy rere 78 CODE Re Ne omen 82 Huitzi atzien dii Par 94 Chapter Enda EO eia laia EAEE 85 Chapter 1 Standard Configuration 1 NLS FR20 Series fixed mount barcode scanner 2 USB cable 3 Quick Start Guide Chapter 2 Optional Configuration 1 RS 232 cable 2 5V power adapter You should retain proof of purchase and ask your dealer for a warranty card Note You should check to make sure that everything on the standard configuration list is present and intact after opening the package If any contents are damaged or missing please keep the original package and contact your dealer immediately for after sale service Chapter 3 Safety Information Precautions Disassem
7. line is a UPC E barcode while the part circled by red dotted line is add on code SO 23456178901 123 pe pe pe pe edesten W201420 W201400 Enable 2 Digit Add On Code Disable 2 Digit Add On Code 5 Digit Add On Code A UPC A barcode can be augmented with a five digit add on code to form a new one In the examples below the part surrounded by blue dotted line is a UPC E barcode while the part circled by red dotted line is add on code 23456 pl 23456 78901 W401440 W401400 Enable 5 Digit Add On Code Disable 5 Digit Add On Code Transmit Preamble Character 081408 Transmit Preamble Character 0 W081400 Do Not Transmit Preamble Character 0 46 Interleaved 2 of 5 Restore Factory Defaults WFFD99A Restore the Factory Defaults of Interleaved 2 of 5 Enable Disable Interleaved 2 of 5 WO011801 011800 Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 47 Check Digit Verification A check digit is optional for Interleaved 2 o 5 and can be added as the last digit It is a calculated value used to verify the integrity of the data Disable The scanner transmits Interleaved 2 of 5 barcodes as is Do Not Transmit Check Digit after Verification The scanner checks the integrity of all Interleaved 2 of 5 barcodes to verify that the data complies with the check digit algorithm Barcodes passing the check will be transmitted except the last digit whe
8. the window 2 For a successful read the scanner will beep with its LED turning from red to green After sending the data to the host it will enter standby mode Chapter 9 System Settings Illumination Always ON Illumination LED keeps ON after the scanner is powered Normal Illumination LED is turned on when the scanner is reading barcode OFF Illumination LED is OFF all the time Normal OFF WOCOO0C Always ON Notification Mute Mode Scanning the Enable Mute Mode Disable Mute Mode can turn off on all notification beeps W400000 W400040 Enable Mute Mode Disable Mute Mode Good Read Beep WO40E04 W040E00 Good Read Beep On Good Read Beep Off Good Read Beep Frequency Duration WFFO9DA Low Frequency WFF0925 High Frequency WFFOASE 80ms WFF094B Medium Frequency WFFOA1F 40ms WFFOASD 120ms Scan Mode Sense Mode The scanner activates a decode session every time when it detects a change in ambient illumination and meets the requirement of the image stabilization timeout Decode session continues until barcode is decoded or the decode session timeout expires Moreover a trigger pull can also activate a decode session WO30000 Sense Mode Decode Session Timeout This parameter sets the maximum time decode session continues during a scan attempt It is programmable in 0 15 increments from 0 15 to 25 5s If it is set to 0 the dec
9. 01310 W101300 Enable 2 Digit Add On Code Disable 2 Digit Add On Code 5 Digit Add On Code An EAN 8 barcode can be augmented with a five digit add on code to form a new one In the examples below the part surrounded by blue dotted line is an EAN 8 barcode while the part circled by red dotted line is add on code 89012 m LA b 1 bek m Lk I un I E p 1 W201320 W201300 Enable 5 Digit Add On Code Disable 5 Digit Add On Code EAN 8 Extension Disable EAN 8 Zero Extend Transmit EAN 8 barcodes as is Enable EAN 8 Zero Extend Add five leading zeros to decoded EAN 8 barcodes to extend to13 digits W401300 W401340 Disable EAN 8 Zero Extend Enable EAN 8 Zero Extend 36 EAN 13 Restore Factory Defaults WFFD995 Restore the Factory Defaults of EAN 13 Enable Disable EAN 13 WO011101 WO011100 Enable EAN 13 Disable EAN 13 Transmit Check Digit EAN 13 is 13 digits in length with the last one as its check digit used to verify the integrity of the data W041104 041100 Transmit Check Digit Do Not Transmit Check Digit 37 2 Digit Add On Code An EAN 13 barcode can be augmented with a two digit add on code to form a new one In the examples below the part surrounded by blue dotted line is an EAN 8 barcode while the part circled by red dotted 1 234567 89012 1 line is add on code L W101110 W101100 E
10. 11 do not transmit check digit Two check digits MOD10 MOD11 transmit check digit No check digit verification otandard User defined User defined User defined Comply with 1994 PDF417 specifications ECC 000 140 ECC 200 ECC 200 FNC1 is the 1st or 5th character after the start character 8 d3 ECC 200 FNC1 is the 2nd or 6th character after the start character d4 ECC 200 ECI protocol supported ECC 200 FNC1 is the 1st or 5th character after the start character ECC 200 FNC1 is the 2nd or 6th character after the start EN C EE EO QR1 comply with AIM ISS 97 001 specifications 01 QR2 2005 symbol protocol not supported 102 2005 symbol protocol supported 2005 symbol protocol not supported FNC1 is the Q3 character right after the start character QR Code 104 QR2 2005 symbol ECI protocol supported FNC1 is the character right after the start character 105 QR2 2005 symbol ECI protocol not supported FNC1 is the 2nd character right after the start character QR2 2005 symbol ECI protocol supported FNC1 is the 2nd character right after the start character 81 CODE ID Prefix Code ID can also be used to identify barcode type For the details see the CODE ID Table W800200 W800280 Disable CODE ID Prefix Enable CODE ID Prefix You can choose to transmit original CODE ID or visible CODE ID by scanning the appropriate barcode below WO018A00 WO1
11. 2 Ensure the barcode type is enabled Cannot read barcodes 3 Ensure the barcode is not defaced Wrinkled soiled or torn barcodes might be unreadable 85 Newland Newland Taiwan Inc 9 SSMA EAEN ARAE 25 523548 26 831 r1 76 7 6 268 Liancheng Rd Jhonghe Dist 235 New Taipei City Taiwan TEL 886 2 7731 5388 FAX 886 2 7731 5389 info newland id com tw www newland id com tw
12. 47 Enable Disable Interleaved 2 47 eue disi ee ee OE TTE 48 Epp HER 49 RES 49 Azara 49 Biga AA m 50 RE SIO KAT xoc EEUU 50 Enable BisableH ES o0 Matrix 2 of 5 European Matrix 2 Of I aa ess eos ess eo ev ees en eu eve Coen eeu ud aua UE E 51 Restore Factory 51 Ehable Disable 51 Check Digit Verification eate 2 oda diga des 02 29 ae erect 53 Restore Factory RE lar GA 53 Enable Disable Indausttidl 2D ee ee 53 Check Digit Venlc alon see 54 55112141615 26 EE 55 Restore Factory 55 hable Disable Standard 29 nenne 55 Check Digi eiguzuz ae rn 56 Rv TTE of Restore Factory 57 COC E 57 Transmit Start Stop 57 Enable Disable Code 39 nenne nenne nenne nnnnne nenne nnennn nennen 58 Check Digit NA ash u Le 59 OA ee H 60 60 EriableDISable elez 9 60 Check Digit 61 ya 62 Code O T
13. 800D80 W800D00 Enable QR Code Disable QR Code Micro QR This parameter is valid only when QR Code is enabled W049904 W049900 Enable Micro QR Disable Micro QR 77 Chapter 13 Data Formatting AIM ID Prefix AIM Automatic Identification Manufacturers IDs define symbology identifiers and data carrier identifiers For the details see the AIM ID Table If AIM ID prefix is enabled the engine will add the symbology identifier before the scanned data after decoding WFFD9C1 WFFD9CO Disable AIM ID Prefix Enable AIM ID Prefix 78 Symbology Code 128 UCC EAN 128 GS1 128 AIM 128 EAN 8 EAN 13 ISSN ISBN UPC E UPC A Interleaved 2 of 5 ITF 6 ITF 14 Matrix 2 of 5 Industrial 25 Standard 25 1 1 1 1 2 IEA JE4 JE1 IEA IES JEO 5 4 JEO JEO 11 113 114 113 114 113 1x1 1x2 1x3 180 AIM ID Table Standard Code 128 FNC1 is the character right after the start character FNC1 is the 2nd character after the start character Standard EAN 8 EAN 8 2 Digit Add On Code EAN 8 5 Digit Add On Code Standard EAN 13 EAN 13 2 5 Digit Add On Code Standard UPC E UPC E 2 5 Digit Add On Code Standard UPC A UPC A 2 5 Digit Add On Code No check digit verification Transmit check digit after verification Do not transmit check digit after verification Transmit check digit Do not transmit check digit Transmit check
14. 8A01 Original CODE ID Visible CODE ID 82 Co 3 Symbology Code 128 FNC3 Code 128 UCC EAN 128 EAN 8 EAN 13 UPC E UPC A Interleaved 2 of 5 ITF 14 ITF 6 Code 39 Codabar otandard 25 Code 93 AIM 128 MSI Plessey ISBN Industrial 25 Matrix 2 of 5 RSS 14 RSS Limited RSS Expand Code 11 Plessey ISSN PDF417 QR Code Data Matrix CODE ID Table Original Code ID 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 OKOA OxOD OxOF 0x10 0x11 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 0x20 0x21 0x23 Visible Code ID A 0x41 B 0x42 C 0x43 0 0 44 E 0x45 F 0x46 0 47 H 0x48 0x49 J Ox4A M Ox4D O Ox4F P 0x50 Q 0x51 U 0x55 V 0x56 W 0x57 X 0x58 Y 0x59 Z 0x5A Ox5B Ox5C Ox5D 5 Ox5F 0x60 a 0x61 0 63 Terminating Character Suffix A terminating character such as carriage return CR or carriage return line feed pair CRLF or horizontal tab TAB can be used to mark the end of data W616000 W616001 Disable Terminating Character Suffix Append CR W616021 W616041 Append CRLF Append TAB 84 Chapter 14 Troubleshooting Does not respond to input Disconnect the power adapter and then reconnect it Scanned data is not Ensure the scanner s communication parameters such as baud rate interface displayed on the host match the host s settings 1 Follow the scanning instructions in this manual to scan barcode
15. Auto ID Tech Co Ltd reserves the right to make final interpretation of the statement above Fujian Newland Auto ID Tech Co Ltd 3F Building A No 1 Rujiang Xi Rd Mawei Fuzhou Fujian China 350015 http www nlscan com Revision History V1 0 Initial release April 1 2015 Table of Contents Chapter 1 Standard wA i hl a E RE 1 Chapter 2 Optional Configuration neen 2 Chapter 3 Safety Information E E TEE 3 osse mM MEINE MUI 3 3 Chapter 4 Product Features nennen AEE 4 Chapter 5 Technical Specifications 2 2 2222 2 2 2212 2 2244422 1 1 a 5 FR20 6 Chanter 7 WIEING 7 Chapter Scanning 9 Reading a Digital Barcode off Mobile 9 Reading a Barcode Minted On ape dE 9 Chapter 9 System SEINO PA 10 MOMIRA 10 Neue ala E E 11 MEO uela esse ee ee Eee 11 39008 FCA 11 Read Beep SG deda Dial Bidal dela 12 M 13 SENSE eee 13 Continuous aa 15 Factory ABIT CHEM 17 TIGA Al COO EE Dm 18 e 20 C hapler T0
16. E 1200004 E IA cil I 0123456 d a W201520 W201500 Enable 2 Digit Add On Code Disable 2 Digit Add On Code 5 Digit Add On Code A UPC E barcode can be augmented with a five digit add on code to form a new one In the examples below the part surrounded by blue dotted line is a UPC E barcode while the part circled by red dotted line is add on code 2252777 78901 123456 l AAA dee err e W401540 W401500 Enable 5 Digit Add On Code Disable 5 Digit Add On Code 42 Transmit System Character 081508 W081500 Transmit System Character 0 Do Not Transmit System Character 0 UPC E Extension Disable UPC E Extend Transmit UPC E barcodes as is Enable UPC E Extend Extend UPC E barcodes to make them compatible in length to UPC A W801580 W801500 Enable UPC E Extend Disable UPC E Extend 43 UPC A Restore Factory Defaults WFFD999 Restore the Factory Defaults of UPC A Enable Disable UPC A WO01 1401 011400 Enable UPC A Disable UPC A Transmit Check Digit UPC A is 13 digits in length with the last one as its check digit used to verify the integrity of the data 041404 041400 Transmit Check Digit Do Not Transmit Check Digit 44 45 2 Digit Add On Code A UPC A barcode can be augmented with a two digit add on code to form a new one In the examples below the part surrounded by blue dotted
17. Enable Disable RSS Limited WO081B08 Enable RSS Limited Transmit Application Identifier 01 W201B20 Transmit Application Identifier 01 WO081B00 Disable RSS Limited W201B00 Do Not Transmit Application Identifier 01 72 RSS Expand Restore Factory Defaults WFFD9AA Restore the Factory Defaults of RSS Expand Enable Disable RSS Expand W401B40 W401B00 Enable RSS Expand Disable RSS Expand 73 PDF417 Restore Factory Defaults WFFD9BO Restore the Factory Defaults of PDF417 Enable Disable PDF417 W010C01 W010C00 Enable PDF417 Disable PDF417 Macro PDF417 W100C10 W100C00 Enable Macro PDF417 Disable Macro PDF417 74 Data Matrix Restore Factory Defaults WFFD9B1 Restore the Factory Defaults of Data Matrix Enable Disable Data Matrix WO080C08 WO080C00 Enable Data Matrix Disable Data Matrix Enable Disable Mirrored DM WOC4A0C WOC4A00 Enable Mirrored DM Disable Mirrored DM 15 Rectangular Barcodes Data Matrix has two formats oquare barcodes having the same amount of modules in length and width 10 10 12 12 144 144 Rectangular barcodes having different amounts of models in length and width 6 16 6 14 14 22 W034B03 W034B00 Decode Rectangular Barcodes Do Not Decode Rectangular Barcodes 16 QR Code Restore Factory Defaults WFFD9B2 Restore the Factory Defaults of QR Code Enable Disable QR Code W
18. HS 232 IBI GI TOC B 21 Chapter 13 USB MIC ACE ne 22 u BE O m 22 USB COM Port Emulation u een 22 cM H E 22 Sstandard KeyDoald esse gt 23 23 EMULE AEF E YA 25 USB Country Keyboard nnn nnns nnns 26 Chapter 12 SV IMDOlOGICS ccc 29 telar 29 Global 29 egal eer 29 Ehable Al SYmbologles 29 Enable 1D 5 30 Disable TD Symbologles 209 e ne 30 Enable ZDSymbologles sexta duse tuni nes isa diac tionc diac dona duc 30 Disable 2D SVIMDOlOGICS RE ua 30 31 Restore Factory Rara 31 Enable Disable Code 128 31 PIS EUM toga pec E 32 RES 2 dE eare era 32 Enable Disable 128 32 TAN In AA ee ee et ee E EEN AE N 33 Restore Factory Dergaulls nee 33 Enable Disable AIM 726 MM 33 EA C LL MM MEI EDU 34 nisi Amos ndi c S 34 Enable Disable EAN 6 34 diario geziz aA Sie nate nen Mee mtr Ne
19. bly and retrofit Do not disassemble or retrofit the device yourself Artificial damages caused by failure to observe this precaution are not covered by the warranty External power supply Use only the supplied power adapter Otherwise there is a risk of damage to the scanner Abnormal situation Keep the scanner away from fire or heat sources If there is unusual odor overheating or smoke immediately cut off the power and disconnect the power adapter and contact your dealer or Newland customer service center Continued use in this case may result in fire or electric shock Drop damage If the scanner is damaged due to a drop from high place immediately cut off the power and contact your dealer or Newland customer service center Mounting location Do not place the scanner on unstable or uneven surfaces Do not expose the scanner to humidity dust or direct sunlight Maintenance The scan window should be kept clean using soft cloth or lens cleaning tissue Do not use detergent to clean it Do not scratch the scan window Sudden temperature drops may cause condensation on the shell which could degrade the performance of the device If condensation occurs dry the device before use Chapter 4 Product Features Designed primarily for such applications as electronic tickets coupons mobile marketing and office automation the NLS FR20 series fixed mount barcode scanner is able to read barcodes fr
20. checks the integrity of all Industrial 25 barcodes to verify that the data complies with the check digit algorithm Barcodes passing the check will be transmitted whereas those failing it will not be transmitted W201900 Disable W601920 W601960 Do Not Transmit Check Digit after Verification Transmit Check Digit after Verification 54 Standard 25 Restore Factory Defaults WFFD9A1 Restore the Factory Defaults of Standard 25 Enable Disable Standard 25 W101A10 W101A00 Enable Standard 25 Disable Standard 25 55 Check Digit Verification A check digit is optional for Standard 25 and can be added as the last digit It is a calculated value used to verify the integrity of the data Disable The scanner transmits Standard 25 barcodes as is Do Not Transmit Check Digit after Verification The scanner checks the integrity of all Standard 25 barcodes to verify that the data complies with the check digit algorithm Barcodes passing the check will be transmitted except the last digit whereas those failing it will not be transmitted Transmit Check Digit after Verification The scanner checks the integrity of all Standard 25 barcodes to verify that the data complies with the check digit algorithm Barcodes passing the check will be transmitted whereas those failing it will not be transmitted W401A00 Disable WC01A40 WCO1ACO Do Not Transmit Check Digit after Verification Transmit Check Digit after Verificati
21. des to verify that the data complies with the check digit algorithm Barcodes passing the checks will be transmitted whereas those failing them will not be transmitted W021F00 Disable W061F02 WO61F06 Do Not Transmit Check Digit after Verification Transmit Check Digit after Verification 68 MSI Plessey Restore Factory Defaults WFFD9A7 Restore the Factory Defaults of MSI Plessey Enable Disable MSI Plessey W081F08 W081F00 Enable MSI Plessey Disable MSI Plessey 69 Check Digit Verification Check digits are optional for MSI Plessey and be added as the last one or two digits which are calculated values used to verify the integrity of the data If the Disable option is enabled the scanner transmits MSI Plessey barcodes as is W301F00 Disable W301F20 F2 Two Check Digits MOD10 MOD10 W401F00 Do Not Transmit Check Digit W301F 10 One Check Digit MOD10 W301F30 F3 Two Check Digits MOD10 MOD11 W401F40 F4 Transmit Check Digit 70 RSS 14 Restore Factory Defaults WFFD9A8 Restore the Factory Defaults of RSS 14 Enable Disable RSS 14 WO011B01 WO011B00 Enable RSS 14 Disable RSS 14 Transmit Application Identifier 01 W041B04 W041B00 Transmit Application Identifier 01 Do Not Transmit Application Identifier 01 71 RSS Limited Restore Factory Defaults WFFD9A9 Restore the Factory Defaults of RSS Limited
22. digit Do not transmit check digit No check digit verification Transmit check digit after verification Do not transmit check digit after verification Not specified No check digit verification One check digit MOD 7 do not transmit check digit One check digit MOD 7 transmit check digit Symbology Code 39 Codabar Code 93 Code 11 Plessey MSI Plessey RSS 14 RSS Limited RSS Expand PDF417 Data Matrix gt 1 144 145 7 FO F F2 F4 IG H3 H8 IKO al IMO JM M M le 1 2 JLO 01 142 Transmit barcodes as is Full ASCII disabled check digit verification One check digit MOD 43 transmit check digit One check digit MOD 43 do not transmit check digit Full ASCII enabled no check digit verification Full ASCII enabled MOD43 transmit check digit Full ASCII enabled MOD43 do not transmit check digit otandard Codabar ABC Codabar Transmit check digit after verification Do not transmit check digit after verification Not specified One check digit MOD11 transmit check digit Two check digits MOD11 MOD1 1 transmit check digit Do not transmit check digit after verification Two check digits MOD11 MOD9 transmit check digit No check digit verification Not specified One check digit MOD10 transmit check digit One check digit MOD 10 do not transmit check digit Two check digits MOD10 MOD
23. e anne 34 2 Digit Add On Gela 35 35 EANO EXON ee ee ee ee 36 PANE een 37 Restore Factory BSE 37 y P 700 37 Transmit Check Digi iecere er ee 37 38 ONC OI Mex Nek Men MeN Men 38 DE AS op ctii ee EE 39 EOS 39 40 Restore Factory 40 haDlE DIsaBlEISBN essen 40 SENSE NI en 40 AA EA 41 Restore Factory 41 III 41 Transmit Check DIG m m 41 2 ble eau ela el adia e 42 5 Digit Add On a eee ee eee ee eee ee ed 42 Transmit System 43 Ei Sig zeatza ee ee 43 m 44 Restore Factory 44 mine 44 Transmit Check ie icit ten ou eto Coto did 44 AAA AA O us de du idu dd du d EU 45 E blea ela lt T E 45 Transm rear ga tzela 46 Tp el UA AA UWAWA E E 47 Restore Factory
24. er on the keypad 3 ALT Break 066004 Emulate ALT Keypad USB Country Keyboard Types WFF6BO00 1 U S WFF6B02 3 Brazil WFF6B04 5 Czech WFF6B06 7 Finland WFF6B01 2 Belgium WFF6BO3 4 Canada WFF6B05 6 Denmark WFF6B07 8 France 27 WFF6B08 9 Austria WFF6BOA 11 Hungary WFF6BOC 13 Italy WFF6BOE 15 Netherland WFF6B10 17 Poland WFF6B09 10 Greece WFF6BOB 12 Israel WFF6BOD 14 Latin America WFF6BOF 16 Norway WFF6B11 18 Portugal WFF6B12 19 Romania WFF6B15 21 Slovakia WFF6B17 23 Sweden WFF6B19 25 Turkey1 WFF6B1B 27 UK WFF6B13 20 Russia WFF6B16 22 Spain WFF6B18 24 Switzerland WFF6B1A 26 Turkey 2 WFF6B1C 28 Japan 28 Chapter 12 Symbologies Introduction Every symbology barcode type has its own unigue attributes This chapter provides programming barcodes for configuring the scanner so that it can identify various barcode symbologies It is recommended to disable those that are rarely used to increase the efficiency of the scanner Global Settings Disable All Symbologies If all symbologies are disabled the scanner can only identify programming barcodes WFFD982 Disable All Symbologies Enable Symbologies WFFD981 Enable Symbologies 29 Enable 1D Symbologies WFFD983 Enable 1D Symbologies
25. expires To suspend resume the operation simply press the trigger WO030002 Continuous Mode Decode Session Timeout This parameter sets the maximum time decode session continues during a scan attempt It is programmable 0 15 increments from 0 15 to 25 5s If it is set to 0 the decode MOOOSTD Decode Session Timeout session timeout is infinite Example Set the Decode Session Timeout to 5s 1 Scan the Decode Session Timeout barcode 2 Scan the numeric barcodes 5 and 0 3 Scan the Save barcode Timeout between Decodes When a decode session ends next session will not happen until the timeout between decodes expires It is programmable 0 15 increments from Os to 25 58 00031 Timeout between Decodes Example Set the Timeout between Decodes to 5s 1 Scan the Timeout between Decodes barcode 2 Scan the numeric barcodes 5 and 0 3 Scan the Save barcode Factory Defaults scanning the following barcode can restore the scanner to the factory defaults You may need to reset your scanner when 1 scanner is not properly configured so that it fails to decode barcodes 2 you forget previous configuration and want to avoid its impact 3 functions that are rarely used have been enabled for the time being A WFFD980 Restore All Factory Defaults Digit Barcodes DOOO000 0 0000002 2 0000004 4 0000006 6 0000008 8 After scanning nume
26. failing it will not be transmitted W081C00 Disable W181C08 W181C18 Do Not Transmit Check Digit after Verification Transmit Check Digit after Verification Codabar Restore Factory Defaults WFFD9A3 Restore the Factory Defaults of Codabar Enable Disable Codabar WO011E01 011 00 Enable Codabar Disable Codabar 60 Check Digit Verification Check digits are optional for Codabar and can be added as the last two digits which are calculated values used to verify the integrity of the data Disable The scanner transmits Codabar barcodes as is Do Not Transmit Check Digit after Verification The scanner checks the integrity of all Codabar barcodes to verify that the data complies with the check digit algorithm Barcodes passing the checks will be transmitted except the last two digits whereas those failing them will not be transmitted Transmit Check Digit after Verification The scanner checks the integrity of all Codabar barcodes to verify that the data complies with the check digit algorithm Barcodes passing the checks will be transmitted whereas those failing them will not be transmitted W101E00 Disable W301E10 W301E30 Do Not Transmit Check Digit after Verification Transmit Check Digit after Verification 61 Transmit Start Stop Character W021E00 Do Not Transmit Start Stop Character WOC1EO00 ABCD ABCD as the Start Stop Character WOC1EO08 abcd abcd as the Start Stop Charac
27. it After Verification The scanner checks the integrity of all Matrix 2 of 5 barcodes to verify that the data complies with the check digit algorithm Barcodes passing the check will be transmitted except the last digit whereas those failing it will not be transmitted Transmit Check Digit After Verification The scanner checks the integrity of all Matrix 2 of 5 barcodes to verify that the data complies with the check digit algorithm Barcodes passing the check will be transmitted whereas those failing it will not be transmitted W041A00 Disable WOC1A04 WOC1AOC Do Not Transmit Check Digit after Verification Transmit Check Digit after Verification 52 Industrial 25 Restore Factory Defaults WFFD9A0 Restore the Factory Defaults of Industrial 25 Enable Disable Industrial 25 W081908 W081900 Enable Industrial 25 Disable Industrial 25 53 Check Digit Verification A check digit is optional for Industrial 25 and can be added as the last digit It is a calculated value used to verify the integrity of the data Disable The scanner transmits Industrial 25 barcodes as is Do Not Transmit Check Digit after Verification The scanner checks the integrity of all Industrial 25 barcodes to verify that the data complies with the check digit algorithm Barcodes passing the check will be transmitted except the last digit whereas those failing it will not be transmitted Transmit Check Digit after Verification The scanner
28. nable 2 Digit Add On Code Disable 2 Digit Add On Code 5 Digit Add On Code An EAN 13 barcode can be augmented with a five digit add on code to form a new one In the examples below the part surrounded by blue dotted line is an EAN 8 barcode while the part circled by red dotted line is add on code l 145678 l 11234567 89012 W201120 W201100 Enable 5 Digit Add On Code Disable 5 Digit Add On Code 38 ISSN Restore Factory Defaults WFFD996 Restore the Factory Defaults of ISSN Enable Disable ISSN W401140 W401100 Enable ISSN Disable ISSN 39 ISBN Restore Factory Defaults WFFD997 Restore the Factory Defaults of ISBN Enable Disable ISBN WO01 1201 WO01 1200 Enable ISBN Disable ISBN Set ISBN Format W041200 W041204 ISBN 13 ISBN 10 40 UPC E Restore Factory Defaults WFFD998 Restore the Factory Defaults of UPC E Enable Disable UPC E WO01 1501 011500 Enable UPC E Disable UPC E Transmit Check Digit UPC E is 8 digits in length with the last one as its check digit used to verify the integrity of the data 041504 041500 Transmit Check Digit Do Not Transmit Check Digit 41 2 Digit Add On Code A UPC E barcode can be augmented with a two digit add on code to form a new one In the examples below the part surrounded by blue dotted line is a UPC E barcode while the part circled by red dotted line is add on code DU MIEL U
29. ode session timeout is infinite Image Stabilization Timeout The scanner waits for the image stabilization timeout to expire before activating a decode session every time it detects a change in ambient illumination This parameter is programmable in 0 15 increments from 0 05 to 25 58 M00031D 00031 Decode Session Timeout Image Stabilization Timeout Example Set the Image Stabilization Timeout to 5s 1 Scan the Image Stabilization Timeout barcode 2 Scan the numeric barcodes 5 and 0 3 Scan the Save barcode Sensitivity This parameter specifies the degree of acuteness of the scanner s response to changes in ambient illumination The higher the sensitivity the lower requirement in illumination change to trigger the scanner You can select an appropriate degree of sensitivity that fits the ambient environment TU LIT TOU II WFFO305 WFFO310 High Sensitivity Medium Sensitivity DANT LEA WFFO330 MOO031A Low Sensitivity Custom Sensitivity Sensitivity levels range from 0 to 255 The smaller the number the higher the sensitivity Example Set the sensitivity level to 10 1 Scan the Custom Sensitivity barcode 2 Scan the numeric barcodes 1 and 0 3 Scan the Save barcode Continuous Mode When enabled the scanner activates decode sessions at user specified intervals i e the timeout between decodes Each decode session lasts until barcode is decoded or the decode session timeout
30. om paper and mobile phones It boasts the following features 1 Digital barcode data capture Capable of reading 1D and 2D barcodes off mobile phones 2 Printed barcode data capture Capable of reading 1D and 2D barcodes printed on paper 3 Swift scanning Delivers effortless snappy and accurate reading of barcodes on various mobile phone LCD screens with different contrast ratios colors and reflectances 4 Easy to use oimple configuration by scanning the programming barcodes provided in the user guide Chapter 5 Technical Specifications 0370 RS 232 9 6 115 2Kbps USB 1 1 HID KBW HID POS 640x480 CMOS 2D PDF417 Data Matrix QR Code 1D EAN 13 EAN 8 UPC A UPC E ISSN ISBN Codabar Code 128 Code 93 ITF 6 ITF 14 Interleaved 2 of 5 Industrial 2 of 5 Standard 2 of 5 Matrix 2 of 5 551 Databar RSS Expand RSS Limited RSS 14 Code 39 Code 11 MSI Plessey Plessey Processor Image Sensor Symbologies Sense mode Continuous mode 10 mil White LED o2mm 69mm 230 Diagonal 68 Horizontal 42 Vertical 54 0 100 000 LUX 1W max Output DC5V 0 5A Input AC100 240V 50 60Hz Scan Mode Resolution Light Source 0 Ambient Light Power Consumption O Power Adapter Notification Beep and LED indicator 127 3mm L X 111 5mm W X 94mm H 300g Operating Temperature 10 C to 50 C Storage Temperature 20 C to 60
31. on 56 Code 39 Restore Factory Defaults WFFD9A2 Restore the Factory Defaults of Code 39 Enable Disable Code 39 W011C01 WO011C00 Enable Code 39 Disable Code 39 Transmit Start Stop Character Code 39 uses an asterisk for both the start and the stop characters You can choose whether or not to transmit the start stop characters by scanning the appropriate barcode below W041C04 W041C00 Transmit Start Stop Character Do Not Transmit Start Stop Character 57 Enable Disable Code 39 Full ASCII The scanner can be configured to identify all ASCII characters by scanning the appropriate barcode below W201C00 W201C20 Disable Code 39 Full ASCII Enable Code 39 Full ASCII 58 59 Check Digit Verification A check digit is optional for Code 39 and can be added as the last digit It is a calculated value used to verify the integrity of the data Disable The scanner transmits Code 39 barcodes as is Do Not Transmit Check Digit after Verification The scanner checks the integrity of all Code 39 barcodes to verify that the data complies with the check digit algorithm Barcodes passing the check will be transmitted except the last digit whereas those failing it will not be transmitted Transmit Check Digit after Verification The scanner checks the integrity of all Code 39 barcodes to verify that the data complies with the check digit algorithm Barcodes passing the check will be transmitted whereas those
32. reas those failing it will not be transmitted Transmit Check Digit after Verification The scanner checks the integrity of all Interleaved 2 of 5 barcodes to verify that the data complies with the check digit algorithm Barcodes passing the check will be transmitted whereas those failing it will not be transmitted WOC1800 Disable WOC1804 WOC180C Do Not Transmit Check Digit after Verification Transmit Check Digit after Verification 48 ITF 6 Restore Factory Defaults WFFD99B Restore the Factory Defaults of ITF 6 Enable Disable ITF 6 WO01 1900 W051901 Disable ITF 6 Enable ITF 6 But Do Not Transmit Check Digit W051905 Enable ITF 6 and Transmit Check Digit 49 ITF 14 Restore Factory Defaults WFFD99C Restore the Factory Defaults of ITF 14 Enable Disable ITF 14 W201800 01820 Disable ITF 14 Enable ITF 14 But Do Not Transmit Check Digit WAO018A0 Enable ITF 14 and Transmit Check Digit 50 Matrix 2 of 5 European Matrix 2 of 5 Restore Factory Defaults WFFD99F Restore the Factory Defaults of Matrix 2 of 5 Enable Disable Matrix 2 of 5 WO11A01 WO011A00 Enable Matrix 2 of 5 Disable Matrix 2 of 5 51 Check Digit Verification A check digit is optional for Matrix 2 of 5 and can be added as the last digit It is a calculated value used to verify the integrity of the data Disable The scanner transmits Matrix 2 of 5 barcodes as is Do Not Transmit Check Dig
33. ric barcode s you need to scan the Save barcode to save the data 0000001 1 0000005 3 0000005 5 0000007 7 000000 9 DOOOOOA A DOOOOOC C DOOOOOE E DOOOOOB DOOOOOD D DOOOOOF F Save Cancel Barcodes After reading numeric barcode s you need to scan the Save barcode to save the data If you scan the wrong digit s you can either scan the Cancel the Last Digit barcode and then the correct digit or scan the Cancel Digits barcode and then the digits you want For instance after reading the Decode Session Timeout barcode and numeric barcodes 1 2 and 3 yOU Cancel the Last Digit The last digit 3 will be removed Cancel Digits All digits 123 will be removed 0000012 2000010 Cancel the Last Digit 0000011 Cancel Digits 20 Chapter 10 RS 232 Interface When the scanner is connected to a host device through its RS 232 interface serial communication is 21 enabled by default However to ensure smooth communication and accuracy of data you need to set the scanner s communication parameters including baud rate to match the host s settings The default settings of the scanner are 9600bps no parity check 8 data bits and 1 stop bit 9 Baud Rate 9600 T 9 1 Baud Rate 2400 WEFD9D4 Baud Rate 14400 WFFD9D6 Baud Rate 38400
34. rification Check digits are optional for Code 11 and can be added as the last one or two digits which are calculated values used to verify the integrity of the data If the Disable option is enabled the scanner transmits Code 11 barcodes as is W1C1D00 W1C1D04 Disable One Check Digit MOD11 W1C1D08 W1C1DOC Two Check Digits MOD11 MOD 1 1 Two Check Digits MOD11 MOD9 W1C1D10 W1C1D14 One Check Digit MOD11 Len lt 11 One Check Digit MOD11 Len lt 11 Two Check Digits MOD11 MOD11 Len gt 11 Two Check Digits 11 9 Len gt 11 W201D00 W201D20 Do Not Transmit Check Digit Transmit Check Digit 66 Plessey Restore Factory Defaults WFFD9A6 Restore the Factory Defaults of Plessey Enable Disable Plessey WO011F01 011 00 Enable Plessey Disable Plessey 67 Check Digit Verification Check digits are optional for Plessey and can be added as the last one or two digits which are calculated values used to verify the integrity of the data Disable The scanner transmits Plessey barcodes as is Do Not Transmit Check Digit after Verification The scanner checks the integrity of all Plessey barcodes to verify that the data complies with the check digit algorithm Barcodes passing the checks will be transmitted except the last two digits whereas those failing them will not be transmitted Transmit Check Digit after Verification The scanner checks the integrity of all Plessey barco
35. ter WO021E02 Transmit Start Stop Character WO0C1E04 ABCD TN E as the Start Stop Character WOC1EOC abcd tn e as the Start Stop Character 62 Code 93 Restore Factory Defaults WFFDYA4 Restore the Factory Defaults of Code 93 Enable Disable Code 93 W081208 W081200 Enable Code 93 Disable Code 93 63 Check Digit Verification Check digits are optional for Code 93 and can be added as the last two digits which are calculated values used to verify the integrity of the data Disable The scanner transmits Code 93 barcodes as is Do Not Transmit Check Digit after Verification The scanner checks the integrity of all Code 93 barcodes to verify that the data complies with the check digit algorithm Barcodes passing the checks will be transmitted except the last two digits whereas those failing them will not be transmitted Transmit Check Digit after Verification The scanner checks the integrity of all Code 93 barcodes to verify that the data complies with the check digit algorithm Barcodes passing the checks will be transmitted whereas those failing them will not be transmitted W201200 Disable W601220 W601260 Do Not Transmit Check Digit after Verification Transmit Check Digit after Verification 64 Code 11 Restore Factory Defaults WFFD9A5 Restore the Factory Defaults of Code 11 Enable Disable Code 11 W011D01 WO011D00 Enable Code 11 Disable Code 11 65 Check Digit Ve

User Guide

Contents

Download Pdf Manuals

Related Search

Related Contents