SS-40WM Quartet Mobile Backplane User's Manual - ELS
Contents
1. position HDD LED Enable2. SS 40WM Quartet Mobile Backplane User s Manual Features of product Frame Aluminum material Front tray Plastic material Interface Support SAS SATA I SATA II Form Factor 1 x 5 25 Bay for 4 x 2 5 SAS amp SATA Hard Drive SSD High performance transfer rate up to SAS 6Gb s amp SATA 6Gb s Support RAID 0 1 5 Functions Need an optional SAS or SATA Raid Control Card Plug amp play hot swappable Support 2 5 single hard drive up to 15mm thickness in height With 4Pin Power connector and 7Pin Signal connector Cooling fan Built in 2 X 4cm 4020 FAN LED for Power amp HDD access Color for choice Standard color is black Other colors are options Dim 175 L X 146 W X 42 H mm Weight 0 79KG HDD Installation 1 For 2 5 SATA HDD SSD put it into the tray as it showed on Picture A 1 and use the provided screws to mount it on the HDD tray one by one 2 For 2 5 SAS HDD or HDD with more than 10 5mm in height loose the cover mounting screw and remove the upper cover And then mount the SAS HDD or the thick HDD on the open tray Note after SAS HDD installed do not put on the upper cover because the SAS HDD height is higher Picture A 2 This HDD tray can fit the HDD max to 14 5mm high Safety Lock The mechanical lock design keeps the HDD inside the frame and prevents it being taken out while HDD is working See Picture B1 amp B2 a LOCK Slide in the HDD tray and press the fro
3. nt handle to lock the HDD tray on the frame See picture B 2 b OPEN Use a finger to hold the Clicker Lock on the front panel and pull the HDD tray out see Picture B 1 Front Panel amp Real View See Picture C amp D 1 5 2 St ies in f Picture C 4 C1 C4 HDD Tray C5 Mechanical lock for front panel C6 Blue color blinking while HDD is accessing No LED indication if HDD not accessing 8 15 9 11 10 12 X abi Hoh OF a Se HDD2 HDD4 POWER JS gi SSEL and Picture D 14 13 D8 4pin Power connector D9 D10 Cooling FAN D11 D12 D13 D14 For SATA or SAS data port connections to the host SATA or SAS RAID controllers D15 HDD LED Switch Indication description a When it is set to x position the front LED does NOT blinking while it is accessing In this case the hard drives will spin up when the system power is turned on b When it is set to O position it is blue blinking while the HDD is being accessing In this case the HDD does not spin up until the SATA initial signal is received c The default setting for D18 HDD LED Switch is to O
Download Pdf Manuals
Related Search