Home

OW-300N2 User Manual

1. i CeEzIO gt WMM QoS This affects traffic flowing from the access point to the client station Configuring QoS options consists of setting parameters on existing queues for different types of wireless traffic You can configure different minimum and maximum wait times for the transmission of packets in each queue based on the requirements of the media being sent Queues automatically provide minimum transmission delay for Voice Video multimedia and mission critical applications and rely on best effort parameters for traditional IP data As an Example time sensitive Voice amp Video and multimedia are given effectively higher priority for transmission lower wait times for channel access while other applications and traditional IP data which are less time sensitive but often more data intensive are expected to tolerate longer wait times Varta fl 5 as AC Type AC BE O AC BK 1 AC _ O s AC Type Ac BE O AC_BE 1 AC VI 2 Le rra AL wha CW min v AC Type AC_BK Background Low High throughput Bulk data that requires maximum throughput and is not time sensitive is sent to this queue FTP data for example AC_BE Best Effort Mediu Medium throughput and delay Most traditional IP MELA iecunoteeme Whi Parmameters of Access Point CW max AIFS TxOp Limit S008 L504 VWukihd Parmameters of Station CW max AIFS TxOp Limit tad H ACHI bit Mo ACK
2. Space available on disk 33156 MB li Inthe Networking Services window ensure that the Internet Gateway Device and UPnP User Interface options are checked If they are not check it to enable them as shown below and click OK to continue Networking Services To add of remove a component click the check box 4 shaded box means that only part of the component will be installed To ee what s included in a component click Details Subcomponents of Networking Services A Internet Gateway Device Discover and Control Client O I Peer to Peer L Z RIF Listener Description Displays icons in My Network Places for UPnP devices detected on the network Also opens the required Windows Firewall ports Total disk space required Fb ME Details Space avallable on disk 333153 4 MB Sales Mail issales ceri tw Copyright 2015 by Cerio Corporation All rights reserved Support maranan Cerio Corporation iii Next in the Control panel open the Administrative Tools and then open Services Scroll down until you find the SSDP Discovery Interface If the Status is not Started double click on SSDP Discovery Interface to open the service properties Change the startup type to Automatic then close the properties Now right click on SSDP Discovery Services and choose Start from the pop up menu The SSDP Discovery Service will then be running and start each time you boot i Service
3. WAN Information in the Overview page to click Release button to release IP address and click Renew button to renew IP address again Dynamic IF oales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw IO lt Hostname The Hostname of the WAN port PPPoE To create wireless PPPoE WAN connection to a PPPoE server in network Internet Connection Type Mode statici oynamicip prroe perp PPPoE Username Password Reconnect Mode Always On snbemand Manual Idle Time TE Minutes tee 1492 lt User Name Enter User Name for PPPoE connection lt Password Enter Password for PPPoE connection lt Reconnect Mode Always on A connection to Internet is always maintained On Demand A connection to Internet is made as needed lt When Time Server is enabled at the On Demand mode the Notice Reconnect Mode will turn out Always on lt Manual Click the Connect button on WAN Information in the Overview page to connect to the Internet lt Idle Time Time to last before disconnecting PPPoE session when it is idle Enter preferred Idle Time in minutes Default is 0 indicates disabled When Idle time is disabled the Reconnect Mode will turn out Always on lt MTU By default it s 1492 bytes MTU stands for Maximum Transmission Unit Consult with WISP for a correct MT
4. Cerio Corporation CERIO Corporation OW 300N2 1000mW eXtreme Power 11N 300Mbps Outdoor Access Point Ai Sales Mail issales cerio com tw a py 2015 by Cerio nii shaik aL ii All ri 2 e SEE E A A a x soul JE oft 5u raa com t 1 Table of Contents VUE OC COLON PES A A T E E E 5 1 1 CW ran E E E AEA E EARNE EAN E EIEE OEA EE 5 1 2 Pack OC ONGOING seen ssp E E O EE itera ang OOO 5 1 3 Applications in Wireless Network 000 0 cc cece eseessesssessssssssssssssssssssssssessessesseeeseeeesens 6 1 4 FC AUS o E T E E AE A A son snoiaas A E 7 1 5 Panel Function DeSCription 0000000000000 ee eeeseessssssssssssssssssssssssssssssessesssesessseesseeseeeeees 9 1 6 Ground connection install a method 0 000 cc ccccessssceceeesssseeeeeeessseeeeeeeessaeees 10 1 7 Software Configuration 22 00 00 cc ceecccccccccccesssssseceecccceessssseeeeccecesessssseeeeeeeeeeeesseeeeees 11 1 8 Wizard Setup ec eee eee eee 14 AP Mode Con figurationn cccccccccsssssscsssscsscccccssssssscssssccccssecccssssssssssccccessecs 18 2 1 Chose Your Operating Mode AP Mod ccc ccccccssseccceeesssseeeceeessseeeeeeesaaes 18 2 2 External Network CONMGCUION soci csssccescossaswasdexiecsrasiaisiagsctsnacossausesbersasnnsmieisdepicmanensauseseeans 19 2 3 Configure OW 300N2 LAN IP Address 00000000000 cccccccccccccsesssssseeeeeeeesesssssseeeeeees 19 2 4 Wireless General Setup oc cccc
5. Disable Enable this option to stop the SSID broadcast in your network When disabled people could easily obtain the SSID information with the site survey software and get access to the network if security is not turned on When enabled network security is enhanced It s suggested to enable it after AP security settings are archived and setting of AP clients could make to associate to it Client Isolation By default its Disable Select Enable all clients will be isolated from each other which means they can t reach each other IAPP Inter Access Point Protocol is designed for the enforcement of unique association throughout a ESS Extended Service Set and for secure exchange of station s security context between current access point AP and new AP during hand off period Maximum Clients The default value is 32 You can enter the number of wireless clients that can associate to a particular SSID When the number of client is set to 5 only 5 clients at most are allowed to connect to this VAP Security Type Select the desired security type from the drop down list the options are Disable WEP WPA PSK WPA2 PSK WPA Enterprise WPA2 Enterprise and WEP 802 1X WEP WPA PS VPA 2 PSE WIPS Enterprise WIPA Enterprise WEP 802 1 Disable Data are unencrypted during transmission when this option is selected WEP Wired Equivalent Privacy WEP is a data encryption mechanism based on a 64 bit or 128 bit shared
6. 5 Start IP IP Format 1 254 End IP IP Format 1 254 DNS1 IP IP Format 1 254 DNS2 IP IP Format 1 254 WINS IP IP Format 1 254 Domain Length 32 0 9 A Z a z SORS Ar T AA y as oOrporation AN Fignts reserved Gales Mall lanal afcerio com b aa Cerio Corporation 600 99999999 Table B WEB GUI Valid Characters continued System Name Location Length 32 0 9 A Z a z Space POTS O Pete ers Description 32 chars Password Length 4 30 0 9 A Z a z G5 _ lt gt 5 HTTP HTTPS Port 1 65539 Telnet SSH Port 1 65935 RO RW community Length 32 0 9 A Z a z 1 S _ l lt gt 0 i RO RW user Length 31 0 9 A Z a z 1 SH _ Fl25 gt 7 RO RW password Length 8 32 0 9 A Z a z 1 SH _ F 25 gt 7 Community Length 32 0 9 A Z a z LORI NAT Jai A e IP IP Format 1 254 Tx Power 1 100 Profile Name 32 chars ESSID Length 31 Space 0 9 A Z a z 1 SHW _ lt gt 0 0 WEP Key 10 26 HEX chars or 5 13 ASCII chars Pre shared Key 8 63 ASCII chars 64 HEX chars Beacon Interval 20 1024 Date Beacon Rate 1200 Fragment Threshold 256 2346 RTS Threshold 1 2347 r Em Pula Lrf ALEF bt ER ee Ik Sales chiar was Ie ee ee O COM LW Cerio Corporation Table B WEB G
7. AC BEI Ac Y2 z x e sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Cerio Corporation v AC Type Background High throughput Bulk data that requires maximum throughput and is not time sensitive is sent to this queue FTP data for example AC_BE Best Effort Medium Medium throughput and delay Most traditional IP data is sent to this queue AC VI Video High Minimum delay Time sensitive video data is Eaa a a ee AC _ VO Voice High Time sensitive data like VolP and streaming MO ee CWmin Minimum Contention Window This parameter is input to the algorithm that determines the initial random backoff wait time window for retry of a transmission The value specified here in the Minimum Contention Window is the upper limit in milliseconds of a range from which the initial random backoff wait time is determined CWmax Maximum Contention Window The value specified here in the Maximum Contention Window is the upper limit in milliseconds for the doubling of the random backoff value This doubling continues until either the data frame is sent or the Maximum Contention Window size is reached Once the Maximum Contention Window size is reached retries will continue until a maximum number of retries allowed is reached Valid values for the cwmax are 1 3 7 15 31 63 127 255 511 or 1024 The value for cwmax must be higher than
8. Aggregation Frames The Aggregation Frames is in the range of 2 64 default is 32 It determines the number of frames combined on the new larger frame Aggregation Size The Aggregation Size is in the range of 1024 65535 default is 50000 It determines the size in Bytes of the larger frame r ns A p Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw caio Change these settings as described here and click Save button to save your changes Click Reboot button to activate your changes The items in this page is for AP s RF general settings and will be applied to all VAPs and WDS Link 5 6 Configure Wireless Advanced Setup The administrator can change the Slot Time ACK Timeout RTS threshold and fragmentation threshold settings for the system Please click on Wireless gt Advanced Setup and follow the below setting Wireless Setur Advanced setup Slot Time E j Distance ACK Timeout EE Beacon Interval DTIM Interval RTS Threshlod Feet short Preamble Enable Dis IGMP Snooping Enable bis Greentield Enable 4 Dis hh Enable bi gt Slot Time Slot time is in the range of 9 1489 and set in unit of microsecond The default value is 9 microsecond Slot time is the amount of time a device waits after a collision before retransmitting a packet Reducing the slot time decreases the overall back off which increases throug
9. Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEZIO lt gt Shared secret The secret key for system to communicate with Authentication RADIUS server Support 1 to 64 characters v WEP 802 1x When WEP 802 1x Authentication is enabled please refer to the following Dynamic WEP and RADIUS settings to complete the configuration Dynamic WEF Settings WEP Key Length s4bits izbit WEP Key Update Period Eii EAP Reauth Period Bel Suthentication RADIUS Server Server IP eae lols Shared Secret Accounting RADIOS Server Enable Disable secondary Authentication RADIUS Server Server IF eae lols Shared Secret Dynamic WEP Settings lt gt WEP Key length Check on the respected button to enable either 64bits or 128bits key length The system will automatically generate WEP keys for encryption WEP Key Update Period The time interval WEP will then be updated the unit is in seconds default is 300 seconds 0 do not rekey EAP Reauth Period EAP re authentication period in seconds default is 3600 0 disable re authentication Authentication RADIUS Server Settings lt gt lt gt Authentication Server Enter the IP address of the Authentication RADIUS server Port The port number used by Authentication RADIUS server Use the default 1812 or enter port number specified Shared secret The secret key for system to communicat
10. Default Gateway SREB Ree BeBe 192 165 2254 DMS 2 IP WINS IP Domain Lease Time Bein DHCP Check Enable button to activate this function or Disable to deactivate this service Start IP End IP Specify the range of IP addresses to be used by the DHCP server when assigning IP address to clients The default range IP address is 192 168 2 10 to 192 168 2 70 the netmask is 255 255 255 0 DNS1 IP Enter IP address of the first DNS server this field is required DNS2 IP Enter IP address of the second DNS server this is optional r ns A p Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw E10 WINS IP Enter IP address of the Windows Internet Name Service WINS server this is optional Domain Enter the domain name for this network Lease Time The IP addresses given out by the DHCP server will only be valid for the duration specified by the lease time Increasing the time ensure client operation without interruptions but could introduce potential conflicts Lowering the lease time will avoid potential address conflicts but might cause more interruptions to the client while it will acquire new IP addresses from the DHCP server Default is 86400 seconds Click Save button to save your changes Click Reboot button to activate your changes 5 5 Wireless General Setup The administrator can change the data transmission chan
11. The wired clients of OW 300N2 are in the same subnet from Main Base Station and it accepts wireless connections from client devices You can disabled the mode extend repeater AP function will be do to AP Client function Router AP Mode Gateway Access Point WDS gt gt Router AP without WDS It can be deployed as a gateway with wireless Access Point Router AP with WDS It can be deployed as a gateway with wireless Access Point and provides WDS link for network extension WISP Repeater AP Mode gt It can be used as an Outdoor Customer Premises Equipment CPE to receive wireless signal over last mile application helping WISPs deliver wireless broadband Internet service to residents and business customers In the CPE mode OW 300N2 is a gateway enabled with NAT and DHCP Server functions The wired clients connected to OW 300N2 are in different subnet from those connected to Main Base Station and in CPE mode it does not accept wireless association from wireless clients 1 4 Features gt VV V WV VV VV VV VV WV Operation Modes Router AP Mode AP Mode WDS Mode Client Bridge Repeater AP Mode and WISP Repeater AP Mode 1000mW at 2 4Ghz Output High Power IEEE 802 11n 2Tx 2Rx Design Bandwidth of up to 300Mbps Tx 300Mbps Rx link rate Maxmum Security with 802 1X WAP and WPA2 Support Over load current protection for the board design and 3 LEDs Wireless Signal Strength Weater Proof RJ45 C
12. The wireless clients connected to Internet There are three connection types for the WAN port Static IP Dynamic IP PPPoE and PPTP Please click on System gt WAN and follow the below setting n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO WAN Setup Internet Connection Type Mode staticile oynamicie pppoe prrP Dynamic IP ONS No Default DNS Server Specify OMS Server IF service Enable Disable MAC Clone ke ep Default MAC Address Clone MAC Address ocgdieal icoeT Manual MAC Address zz o oOo Oo ma Mode By default it s Static IP Check Static IP Dynamic IP PPPoE or PPT P to set up system WAN IP Y Static IP Users can manually setup the WAN IP address with a static IP provided by WISP lt IP Address The IP address of the WAN port default IP address is 192 168 1 254 lt IP Netmask The Subnet mask of the WAN port default Netmask is 255 255 255 0 lt IP Gateway The default gateway of the WAN port default Gateway is 192 168 1 1 v Dynamic IP Please consult with WISP for correct wireless settings to associate with WISP AP before a dynamic IP along with related IP settings including DNS can be available from DHCP server If IP Address is not assigned please double check with your wireless settings and ensure successful association Also you may go to
13. Without QoS all traffic data is equally likely to be dropped when the network is congested This can cause a reduction in network performance and make the network inadequate for time critical application such as video on demand A classifier groups traffic into data flows according to specific criteria such as the source address destination address source port number destination port number or incoming port number For example you can configure a classifier to select traffic from the same protocol port such as FTP to form a flow Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Sociis atest CERO Please click on Advance gt QoS QoS Setu Bandwidth Control Service Enable Disable Comment Rule Bandwidth U D Action Mode Total Bandwidth Per Rule Bandwidth No items in the list Upload Lo kbps Download Lod kbps Save Clear X Bandwidth Control gt Service The default is Disable Select Disable or Enable of QoS Service gt Mode Can choose a total Bandwidth control or Per Rule Bandwidth control v Total Bandwidth the function is all customers use a total bandwidth Upload Setting use upload control by total bandwidth Download Setting use download control by total bandwidth v Per Rule Bandwidth Use the rules to define the classifiers After you define the rules you Can specify action to act upon the traffic that ma
14. default Netmask is 255 255 255 0 gt DNS Check either No Default DNS Server or Specify DNS Server IP button as desired to set up the system DNS Primary The IP address of the primary DNS server Secondary The IP address of the secondary DNS server gt 802 1d Spanning Tree The spanning tree network protocol provides a loop free topology for a bridged LAN between LAN interface and 8 WDS interfaces from wds0 to wds7 The Spanning Tree Protocol which is also referred to as STP is defined in the IEEE Standard 802 1d eas gt m me M ae Sigin 192 168 2 ts2 168 2250 g i Bloc y Spanning LOOP ya Kan Tree Protocol OWY SOON2 gt 132 1662 254 ied b 192 168 2251 rm 192 168 2253 168 2 Base Station Remote Base Station gt DHCP Setup Devices connected to the system can obtain an IP address automatically when this service is enabled DHCF Server Service Enable Disable Start IP End IP Default Gateway DNS1IP ons 1 O wins 7 Lease Time DHCP Check Enable button to activate this function or Disable to deactivate this service e es a 5 Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Start IP End IP Specify the range of IP addresses to be used by the DHCP server when assigning IP address to clients The default range IP address is 192 168 2 10 to 192 168 2 70 the net
15. desired to set up system DNS ONS Oho Default DNs Server Specify OMS Server IF Primary ONS i Secondary ONS ia v Primary The IP address of the primary DNS server v Secondary The IP address of the secondary DNS server NAT The NAT support Enable and Disable Service Se Pie Enable Disable MAC Clone The MAC address is a 12 digit HEX code uniquely assigned to hardware as identification Some ISPs require you to register a MAC address in order to access to Internet If not you could use default MAC or clone MAC from a PC n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw MAC Clone ke ep Default MAC Address Clone MAC Address dciddieaileichiec Manual MAC Address a E a E 4 a Keep Default MAC Address Keep the default MAC address of WAN port on the system Clone MAC Address If you want to clone the MAC address of the PC then click the Clone MAC Address button The system will automatically detect your PC s MAC address gt The Clone MAC Address field will display MAC address of the PC Notice connected to system Click Save button can make clone MAC effective Manual MAC Address Enter the MAC address registered with your ISP Click Save button to save your changes Click Reboot button to activate your changes 6 4 Configure OW 300N2 LAN IP Address Here are the instructions
16. gt DNS Check either No Default DNS Server or Specify DNS Server IP button as desired to set up the system DNS Primary The IP address of the primary DNS server Secondary The IP address of the secondary DNS server gt 802 1d Spanning Tree The spanning tree network protocol provides a loop free topology for a bridged LAN between LAN interface and 8 WDS interfaces from wds0 to wds7 The Spanning Tree Protocol which is also referred to as STP is defined in the IEEE Standard 802 1d Fa EN Remote Base station a Tee TRG c poA dTa WOS Bridge j ae OWSOON2 p So 92168 2250 132 160 2254 Blocked by Spannin K Yy pP E Tree Protocol l i l U x WOS Bridge 192 1662 255 192 166 2251 Hase Station Remote Base Station o g z 3E gr Click Save button to save your changes Then click Reboot button to activate your changes 2 4 Wireless General Setup The administrator can change the data transmission channel and output power settings for the system Please click on Wireless gt General Setup and follow the below setting n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO Wireless Setup General Setup HT Physical Mode MAC Address 00 11 a3 00 00 0c TRX Stream 02 PUP Robes 00 2 11b 9 n v Channel Bandyidth 20 20 40 Country lus Extension Channel Upper Lower cist Suto 4 Auto
17. issales cerio com tw 5 Up sort f iari DE G r VT Copyright 2015 by Cerio Corporation All rights reserved uppo D ma E a SS N o a CEFO Please click on Wireless gt WDS Setup and follow the below setting security Security Type WOS MAC List H tT O1 Enable WOS Peers MAC Address Description Security Type Option is Disable WEP TKIP or AES from drop down list Needs the same type to build WDS links Security type takes effect when WDS is enabled WEP Key Enter 5 13 ASCII or 10 26 HEX format WEP key AES Key Enter 8 to 63 ASCII or 64 HEX format AES key WDS MAC List Enable Check Enable to create WDS link WDS Peer s MAC Address Enter the MAC address of WDS peer VLAN Tag ID Virtual LAN the system supports tagged VLAN with WDS To enable VLAN function valid values are from 0 to 4094 space is disabled Description Description of WDS link gt Notice The WDS link needs to be set at same Channel and with same Notice Security Type Click Save button to save your changes Click Reboot button to activate your changes z a oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw O CERIO 3 7 WDS Status The Peers MAC Address antenna 0 1 received signal strength phy mode and channel bandwidth for each WDS are available WOE
18. the connection track list should show up NetStatus will show all connection track on the system the information include Protocol Live Time Status Source Destination IP address and Port sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Netstat Information Protocol tcp tcp tcp icp tcp tcp UHKA Owr Status TIME AIT THAE _W AIT ESTABLISHED THAE _W AIT TIME AIT TAE _W AIT srdP 192 168 2 22 192 168 22 22 192 168 2 22 192 168 2 254 rcPort 2506 2505 DsHUF 192 168 2 254 197 166 2 254 192 168 2 254 197 166 2 254 192 168 2 254 1927 166 2 254 24 0 0 22 ce oe r a i a l i DstPort ao gt Route Information Select Route Information on the drop down list to display route table OW 300N2 could be used as a L2 or L3 device It doesn t support dynamic routing protocols such as RIP or OSPF Static routes to specific hosts networks or default gateway are set up automatically according to the IP configuration of system s interfaces When used as a L2 device it could switch packets and as L3 device it s capable of being a gateway to route packets inward and outward Extra Information emi Foute Information Route Information Destination Gateway Met mask Interface 192 168 2 0 0 0 0 0 255 255 255 0 bred 239 0 0 0 0 0 0 0 259 0 0 0 bre 23400 0 0 0 0 0 0 224 0 0 0 bret gt ARP Table Information Selec
19. 49 4 2 External Network Connection Network Requirement cccceccccessreeeees 50 4 3 Configure OW 300N2 LAN IP Address 0 0 ccc cccccccccecesssseeceeesssseeeceeessseeceeeesaaes 50 4 4 Wireless General Setup cc ccccccccccccssssssssseeesesssececeeessssseeessssssseeeeeseeeeseeesees 52 4 5 Configure Wireless Advanced Setup 0 oc cc cccceesscccccccessssssseeeeceecessssssseeeeeeees 53 4 6 BOY CSRS 6 anne ASN AAEE nEss 59 4 7 1921 1061 81 Pro een eee ee eee eee 60 4 8 Remote AP Status ensercion iiie iiini UE EE AEE O EE EENE aE aE E 62 4 9 Repeater AP SetU eero EERO EE EEE EEEE 62 Copyright 2015 by Cerio Corporation All rights reserved Saria anaa ain o S 4 10 Repeater AP MAC Filter Setup 000000 0 eecccccccccccssssssseeeccecesessssseeeceeeeseeeaaees 66 5 Router AP Mode Configurrationn cccccccccsssssssssscccsccccssssssscsscccccssessesssees 68 5 1 Chose Your Operating Mode Router AP Mode l 68 5 2 External Network Connection cccccccccccccccccssssceccceesssseecceeessseeeceeesssseeeeeeessseeeeeens 68 5 3 C nfigu ure DDNS UD pees seer ec ste eee ene 73 5 4 Configure OW 300N2 LAN IP Address 000000000000 ccceccccccccceeeessssseeeeeecesesssssseeeeeees 73 5 5 Wireless General Setup 0 0 ec cccccccccecssssssessssssssessssesssescceeseesseseeesesssseeeeeaeas 75 5 6 Configure Wireless Advanced Setup c cc ccccccccccccccess
20. All rights reserved Support support cerio com tw CEFO Wireless Setur General Setup MAC Address 00ILa3 00 00 0c Band Mlode Country Channel Auto Scan AP List causes Level 9 MAC Address The MAC address of the Wireless interface is displayed here Band Mode Select an appropriate wireless band bands available are 801 11 b g n mixed mode Country a region the OW 300N2support region for US ETSI and Japan Channel Choosing the best WiFi channel lt Auto Scan Smart channel judgment the function can auto choose use best Channel lt AP List the function support search neighborhood AP and print site survey list E SID MAC Address 54 Signal Quality 2 Encryption Danny OO 2s Fo0F LF 10 f 39 7 95 56 100 on Current Frequency 2 437 GHz Channel 6 Rescan cles 1X Power You can adjust the output power of the system to get the appropriate coverage for your wireless network Specify digit numbers between level 7 to level 9 the unit is for your environment If you are not sure which setting to choose then keep the default setting level 9 100 gt HT Physical Mode HT Physical Mode THRE Stream 1 0 Channel Bandwidth 20 o 20 40 Extension Channel 4 Upper Lower MIES Short GE Disable Enable Aggregation Disable Enable Aggregation Frames Aggregation Size By sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights res
21. All rights reserved ipport sup iii Cerio Corporation gt Launch Web Browser Launch as web browser to access the web management interface of system by entering the default IP Address http 192 168 2 254 in the URL field and then press Enter DT 3008 Windows Internet Explorer ce F E hitn 192 168 2 254 http 192 1662 254 File Edit View Favorites Toole Help slg Favorites slg ie Web Slice Gallery E DT 300N x gt System Login Connect to 192 168 2 254 The server 192 166 2254 at OW SOON requires a veemame and pasword Warne This server is requesting that your usemame and password be sent in an insecure manner basic authentication without a secure connection User name Fassword C Remember my password Sales Mail issales cerio com as e i a ior F CEFO gt System Overview page will appear after successful login CERIO System T Wires Adan Utilities Statue T Overview Device Information Mode AP Firm ware Version Cen C PE M2HIO4 V1 0 10 Firm wwa re Date 201 S085 10 31 53 System Time 1970701701 0001 35 System Up Time 01 35 ETHI MAC 00 1 124 300300708 ETH MAC 00 1 124 300700704 Wireless MAC 00 1 124 37007009000 CPU Loading Mem orr Used 1 8 Wizard Setup OW 300N2 LAN Information Traic Monttor Ethernet Connection Type StaticIP TP Address 192 168 2254 IP Metmask 25 IP Gateway 132 168
22. Display the information of the system Device Information Display the information of the Port link CPU Information Display the information of the system CPU Memory information Display the information of the system Memory Networking Information Display the information of the network Y VV VV WV Wireless Clients Display the information of the wireless user link 10 2 DHCP Client The administrator can view status of all DHCP Client Users on each DHCP Server Please click on Status gt DHCP Client to look DHCP information sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO DHCP Client List DHCP Server Status Service Enable Start IP 192 168 2 10 End IP 192 168 2 70 Default Gateway 192 166 2 254 DMSTIP 192 166 2 254 DMS IP WINS IP Domain Lease Time 86400 DHCP Client List IP Address MAC Address Expired In Mone gt DHCP Server Status Display the information of the DHCP Server gt DHCP Client List Display the information of the DHCP Client users 10 3 Extra Info Users could pull out information such as Route table ARP table MAC table Bridge table or STP available in the drop down list from system The Refresh button is used to retrieve latest table information Extra Information emi Metstat Information A gt Netstat Information Select NetStatus Information on the drop down list
23. Internet Explorer 6 0 or later gt gt Default IP Address 192 168 2 254 gt Default Subnet Mask 255 255 255 0 gt Default Username and Password MODE Router AP WDS WISP Client Bridge Repeater AP Management Account Root Account Admin Account Username root admin Password default admin IP Segment Set up for Administrator s PC NB Set the IP segment of the administrator s computer to be in the same range as OW 300N2 for accessing the system Do not duplicate the IP Address used here with IP Address of OW 300N2 or any other device within the network gt Example of Segment Windows XP Click Start gt Settings gt Control Panel and then Control Panel window appears Click on Network Connections and then Network Connections window appears Click right on Local Area Connection and select Properties Network Connections Fie Edit View Favorites Tools Advanced Help O Back a P Search Wey Folders Heb Address 5 LANor High Speed Internet Network Tasks x in Create a new connection Local Area Set up a home or small aed Disable office network Status Change Windows Repair Firewall settings Disable this network Bridge Connections device R Repair this connection Create Shortcut Delete mi Rename this connection Rename view skatus of this connection Properties Change settings of this connection Sales Mail
24. Internet is made as needed lt amp When Time Server is enabled at the On Demand mode the Notice Reconnect Mode will turn out Always on sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw OO E CERIO lt Manual Click the Connect button on WAN Information in the Overview page to connect to the Internet lt Idle Time Time to last before disconnecting PPPoE session when it is idle Enter preferred Idle Time in minutes Default is 0 indicates disabled When Idle time is disabled the Reconnect Mode will turn out Always on lt MTU By default it s 1492 bytes MTU stands for Maximum Transmission Unit Consult with WISP for a correct MTU setting v PPTP The Point to Point Tunneling Protocol PPTP mode enables the implementation of secure multi protocol Virtual Private Networks VPNs through public networks CPE Setup Internet Connection Type Mode statici oynamicip PPPoE PPP IP Address IF Metmask PPTP Server IF Address Username Password Reconnect Mode Always On ontbemand Manual Idle Time ae utes GIH 1460 MPPE Encryption Ml MPPE 40 E APPE 128 IP Address The IP address of the WAN port IP Netmask The Subnet mask of the WAN port PPTP Server IP Address The IP address of the PPTP server User Name Enter User Name for PPTP connection Passwor
25. Support support ceria com tw 7 3 Configure UPnP Setup Universal Plug and Play UPnP is an architecture to enable pervasive peer to peer network connectivity between PCs intelligent devices and appliances when UPnP is supported UPnP works on TCP IP network to enable UPnP devices to connect and access to each other very well adopted in home networking environment Please click System gt UPnP and follow the below settings UPNP Setup el alist Service Enable o Disable gt UPnP By default it s Disable Select Disable or Enable of UPnP Service For UPnP to work in Windows XP the OW 300N2 must be available in My Network Places as shown here your specific model may vary T My Network Places File Edit view Favorites Tools Help E gt wi s Search i Folders Ez Address a My Network Places Name Comments Computer Network Location A Network Tasks S DT 300N 2 4Ghz 300Mbps 11nbg 1000mV High Power Wireless DT 300N Local Network If these devices are not available you should verify that the correct components and services are loaded in Windows XP Please refer to Appendix D Using UPnP on Windows XP Click Save button to save changes and click Reboot button to activate changes 7 4 Configure SNMP Setup SNMP is an application layer protocol that provides a message format for communication between SNMP managers and agents By enabling SNMP function the administrator can o
26. by WISP lt IP Address The IP address of the WAN port default IP address is 192 168 1 254 lt IP Netmask The Subnet mask of the WAN port default Netmask is 255 255 255 0 lt IP Gateway The default gateway of the WAN port default Gateway is 192 168 1 1 sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Dynamic IP Please consult with WISP for correct wireless settings to associate with WISP AP before a dynamic IP along with related IP settings including DNS can be available from DHCP server If IP Address is not assigned please double check with your wireless settings and ensure successful association Also you may go to WAN Information in the Overview page to click Release button to release IP address and click Renew button to renew IP address again CPE Setur Internet Connection Type Mode staticip oynamicie pppoe pete Dynamic IP lt Hostname The Hostname of the WAN port PPPoE To create wireless PPPoE WAN connection to a PPPoE server in network CPE Setup Internet Connection Type Mode statici Dynamicip prroE prtp Reconnect Mode Le Always On snbemand Manual Idle Time oO utes MTU User Name Enter User Name for PPPoE connection Password Enter Password for PPPoE connection Reconnect Mode Always on A connection to Internet is always maintained On Demand A connection to
27. can be removed sooner and other senders attempting to send are listening the channel CSMA CA the owner of the channel should continue ownership and finish their transmission and release the channel Then following ownership of the channel will be sooner for the new pair due to shorter slot time However when long duration of existing collision sources and shorter slot time exist the owners might experience subsequent collisions When adjustment to longer slot time can t improve performance then RTS CTS could supplement and help improve performance ACK Timeout ACK timeout is in the range of 1 372 and set in unit of microsecond The default value is 64 microsecond All data transmission in 802 11b g request an Acknowledgement ACK send by receiving radio The transmitter will resend the original packet if correspondent ACK failed to arrive within specific time interval also refer to as ACK Timeout z x e sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw Cerio Corporation ACK Timeout is adjustable due to the fact that distance between two radio links may vary in different deployment ACK Timeout makes significant influence in performance of long distance radio link If ACK Timeout is set too short transmitter will start to Resend packet before ACK is received and throughput become low due to excessively high re transmission ACK Timeout i
28. channel and adjust the output power to level9 100 Extended service set ID indicated the SSID which the clients used to connect to the access point ESSID z 5 oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw CezlO Setup Wizard Wireless Setup This page is used to configure the parameters for wireless LAN clients which may connect to your Access Point Barnid Mode 002 110rg n Channel Tx Power Channel Bandwidth 20 20 40 Extension Channel Upper e Lower EH CERIO TEST Cancel Back Mext 5 Wireless Security setup gt Suggested setting that you use wireless encryption authentication type for security Type to WWPA2 PSkK the cipher suite to AES Key Type to ASCII for 11n high speed mode Pre shared Key Enter the information for pre shared key Pre shared key can be either entered as a 256 bit secret in 64 HEX digits format or 8 to 63 ASCII characters The Pre Shared key sample as 12345678 wireless encryption key for wireless access Setup Wizard Wireless Security Setup This page allows you setup the wireless security to prevent any Unauthorized access to your wireless network Security Type i FE PE WFA General Cipher Suite ses TF Key Type asco ue Pre shared Kev SRE ia Cancel Back Finish sales Mail issales cerio com tw Copyright 2015 by Cerio Corp
29. clients IAPP Inter Access Point Protocol is designed for the enforcement of unique association throughout a ESS Extended Service Set and for secure exchange of station s security context between current access point AP and new AP during hand off period gt Notice APP only used on WPA PSK and WPA2 PSK security type Only one of Notice VAPs can be enabled Maximum Clients Enter maximum number of clients to a desired number For example while the number of client is set to 32 only 32 clients are allowed to connect with this VAP VLAN Tag ID Virtual LAN the system supports tagged VLAN To enable VLAN function valid values are from 0 to 4094 Security Type Select the desired security type from the drop down list the options are WEP WPA PSK WPA2 PSK WPA Enterprise WWPA2 Enterprise and WEP 802 1X Security Type WEP WYP A PSE WPA PSK WIPS Enterprise WIPA Enterprise aa WEP 2 18 v Disable Data are unencrypted during transmission when this option is selected v WEP WEP Wired Equivalent Privacy is a data encryption mechanism based on a 64 bit 128 bit or 152 bit shared key Select WEP as the security type from the drop down list as desired Rey Length E4 bits WEP Auth Method B c pen system W shared Key Index WEP Key 1 oo WEP Key 2 iin WAEA ee e camry a e Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw lt K
30. exposed to the Internet users in a controlled manner including on line gaming video conferencing or others via Virtual Server setup Don t repeat ports usage to avoid confusion Suppose you want to assign ports 21 25 to one FTP Telnet and SMTP server A in the example and port 80 to another B in the example You assign the LAN IP addresses and the ISP assigns the WAN IP address The NAT network appears as a single host on the Internet Please click on Advance gt Virtual Server and follow the below setting Virtual Server Setur Virtual Server SEVICE o Enable 4 Disable Description Private IP Protocol Type Tce woe Public Port a Seen Sivas Run Private Port Save Clear Service By Default It s Disable Check Enable radial button to enable Virtual Server Description Enter appropriate message for resource sharing via Virtual Server Private IP Enter corresponding IP address of internal resource to share VV V WV Protocol Type Select appropriate sessions TCP or UDP from shared host via multiple private ports Yy Private Port A port or a range of ports may be specified as start end i e port 20 80 gt Public Port A port or a range of ports may be specified as start end i e port 20 80 The Private Port and Public Port can be different However total number of ports need gt to be the same Notice Example Public Port is 11 to 20 and the Private Port can be a 10 port
31. frame It creates the larger frame by combining smaller frames with the same physical source and destination end points and traffic class i e QOS into one large frame with a common MAC header Aggregation Frames The Aggregation Frames is in the range of 2 64 default is 32 It determines the number of frames combined on the new larger frame Aggregation Size The Aggregation Size is in the range of 1024 65535 default is 50000 It determines the size in Bytes of the larger frame 4 5 Configure Wireless Advanced Setup The administrator can change the Slot Time ACK Timeout RTS threshold and fragmentation threshold settings for the system Please click on Wireless gt Advanced Setup and follow the below setting p as A p Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CeEzIO Wireless Setur Advanced Setup Slot Time go Distance ACK Timeout 640 Beacon Interval Bif DTIM Interval RTS Threshlod Short Preamble Enable IGMP Snooping Enable Greenfield Enable hha Enable Slot Time Slot time is in the range of 9 1489 and set in unit of microsecond The default value is 9 microsecond Slot time is the amount of time a device waits after a collision before retransmitting a packet Reducing the slot time decreases the overall back off which increases throughput Back off which is a multiple of the slot time is t
32. get the appropriate coverage for your wireless network Specify digit numbers between level 7 to level 9 the unit is for your environment If you are not sure which setting to choose then keep the default setting level 9 100 n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw HT Physical Mode TARA Stream 1 2 Channel Bandvvidth 20 orai MICS Short GE Disable Enable Aggregation Disable Enable Aggregation Frames Aggregation Size Bi gt HT Physical Mode Tx Rx Stream By default it s 2 Channel Bandwidth The 20 40 MHz option is usually best The other option is available for special circumstances MCS This parameter represents transmission rate By default Auto the fastest possible transmission rate will be selected You have the option of selecting the speed if necessary Shout GI Short Guard Interval by default it s Enable it s can increase throughput However it can also increase error rate in some installations due to increased sensitivity to radio frequency reflections Select the option that works best for your installation Aggregation By default it s Enable To Disable to deactivated Aggregation A part of the 802 11n standard or draft standard It allows sending multiple frames per single access to the medium by combining frames together into one larger
33. key Kev Length Saat WEP Auth Method Ml Open system key Index aceg FS WEF Key 4 v Key Index Skey index is used to designate the WEP key during data transmission 4 different WEP keys can be entered at the same time but only one is chosen v WEP Auth Method Enable the desire option among OPEN or SHARED e es a 5 Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw v WEP Key Enter HEX or ASCII format WEP key value the system supports up to 4 sets of WEP keys WPA PSK or WPA2 PSK WPA or WPA2 Algorithms allows the system accessing the network by using the WPA PSK protected access VPA General Cipher Suite cs Group key Update Period 600 ooo Master Key Update Period RERI Key Type asco Hex v Cipher Suite By default it is AES Select either AES or TKIP cipher suites v Pre shared Key Enter the pre shared key the format shall go with the selected key type gt Pre shared key can be entered with either a 256 bit secret in 64 HEX digits format or Notice g to 63 ASCII characters v Group Key Update Period By default it is 3600 seconds This time interval for rekeying GTK broadcast multicast encryption keys in seconds Entering the time length is required WPA Enterprise or WPA2 Enterprise The RADIUS authentication and encryption will be both enabled if this is selected Sales Ma
34. likely delay the association and roaming process because stations scanning for available access points may miss the beacons You can decrease the beacon interval which increases the rate of beacons This will make the association and roaming process very responsive however the network will incur additional overhead and throughput will go down DTIM Interval The DTIM interval is in the range of 1 255 The default is 1 DTIM is defined as Delivery Traffic Indication Message It is used to notify the wireless stations which support power saving mode when to wake up to receive multicast frame DTIM is necessary and critical in wireless environment as a mechanism to fulfill power saving synchronization Sales Mail issal sales cerio com tw upport cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Cerio Corporation Oy Notice A DTIM interval is a count of the number of beacon frames that must occur before the access point sends the buffered multicast frames For instance if DTIM Interval is set to 3 then the Wi Fi clients will expect to receive a multicast frame after receiving three Beacon frame The higher DTIM interval will help power saving and possibly decrease wireless throughput in multicast applications RTS Threshold TRTS Threshold is in the range of 1 2347 byte The default is 2347 byte The main purpose of enabling RTS by changing RTS threshold is to reduce possible collisi
35. more information about covered privileges for these two accounts please refer to Appendix D Network manager Privileges gt Root Password Log in as a root user and is allowed to change its own plus admin user s password v New Password Enter a new password if desired v Check New Password Enter the same new password again to check e ars a n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Cerio Corporation gt Admin Password Log in as a admin user and is allowed to change its own v New Password Enter a new password if desired v Check New Password Enter the same new password again to check gt Admin Login Methods Only root user can enable or disable system login methods and change services port v Enable HTTP Check to select HTTP Service v Enable HTTPS Check to select HTTPS Service v HTTPS Port The default is 443 and the range is between 1 65535 amp fyoualready have an SSL Certificate please click Upload Key button to select the file Notice and upload it v Enable Telnet Check to select Telnet Service v Telnet Port The default is 23 and the range is between 1 65535 v Enable SSH Check to select SSH Service v SSH Port Please The default is 22 and the range is between 1 65535 amp Click Generate Key button to generate RSA private key The host key footprint gray N
36. o Disable Hostname zz ee Users word Enabled By default its Disable The mapping domain name won t change when dynamic IP changes The beauty of it is no need to remember the dynamic WAP IP while accessing to it Service Provider Select the preferred Service Provider from the drop down list including dyndns dhs ods and tzo Hostname Host Name that you register to Dynamic DNS service and export User Name amp Password User Name and Password are used to login DDNS service Click Save button to save your changes Click Reboot button to activate your changes n ergs Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO 6 6 Wireless General Setup The administrator can change the data transmission channel and output power settings for the system Please click on Wireless gt General Setup and follow the below setting Wireless Setur General Setup MAC Address OO TLias 0000 0e Band Mode Tx Power MAC Address The MAC address of the Wireless interface is displayed here Band Mode Select an appropriate wireless band bands available are 801 11 b g n mixed mode Country a region the OW 300N2 support region for US ETSI and Japan 1X Power You can adjust the output power of the system to get the appropriate coverage for your wireless network Specify digit numbers between level 7 to level 9 the uni
37. of the system via instructions in this page Administrator could also enter new Root and Admin passwords and allow multiple login methods Please click System gt Management and follow the below settings Management Setup system Language Login Methods Language Enable HTTP Port so Enable HTTPS Mil Port EEE Wpiosdkey system Information Enable Telnet WA Port EE system Name FARELALS Enable SSH Mil Port EEAS Beene 2 4GHz 300Mbps 1inbg 1000mWV High Power Wireless R Host Key Footprint Location Ping Watchdog root Password Service Enable Disable New root Password IP Address To Ping See Check root Password Ping Interval 300 preunis Startup Delay Bo Seconds admin Password Failure Count To Reboot New admin Password Check admin Password gt System Information System Name Enter a desired name or use the default one Description Provide description of the system Location Enter geographical location information of the system It helps administrator to locate the system easier The system supports two management accounts root and admin The network manager is assigned with full administrative privileges when logging in as root user to manage the system in all aspects While logging in as an admin user only subset of privileges is granted such as basic maintenance For example root user can change passwords for both root and admin account and admin user can only manage its own For
38. or notices send by the system IP 1 4 Enter the IP addresses of the remote hosts to receive trap messages Click Save button to save changes and click Reboot button to activate 8 Configure Advance Setup 8 1 DMZ DMZ is commonly work with the NAT functionality as an alternative of Virtual Server Port Forwarding while wanting all ports of DMZ host visible to Internet users Virtual Server rules have precedence over the DMZ rule In order to use a range of ports available to access to different internal hosts Virtual Server rules are needed Please click on Advance gt DMZ and follow the below setting DMA Service Disable sutomatic Assignment static Assignment gt Service The DMZ default by Disable Check Enable radial button to enable DMZ Automatic Assignment Enter Internal IP address of DMZ host and only one DMZ host is Supported r ns A p Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw DMZ Service Disable MM Automatic Assignment static Assignment Internal IF Address O Ef Static Assignment Enter external and internal IP address of DMZ host The function only external IP to Internal IP address DMZ Setup DMZ Service Disable Automatic Assignment 0 Static Assignment External IP Address Internal IP Address Click Save button to save your changes Click Reboot button to activate your chan
39. points may miss the beacons You can decrease the beacon interval which increases the rate of beacons This will make the association and roaming process very responsive however the network will incur additional overhead and throughput will go down DTIM Interval The DTIM interval is in the range of 1 255 The default is 1 DTIM is defined as Delivery Traffic Indication Message It is used to notify the wireless stations which support power saving mode when to wake up to receive multicast frame DTIM is necessary and critical in wireless environment as a mechanism to fulfill power saving synchronization a DTIM interval is a count of the number of beacon frames that must occur before the access point sends the buffered multicast frames For instance if DTIM Interval is set to 3 then the Wi Fi clients will expect to receive a multicast frame after receiving three Beacon frame The higher DTIM interval will help power saving and possibly decrease wireless throughput in multicast applications RTS Threshold TRTS Threshold is in the range of 1 2347 byte The default is 2347 byte The main purpose of enabling RTS by changing RTS threshold is to reduce possible collisions due to hidden wireless clients RTS in AP will be enabled automatically if the packet size is larger than the Threshold value By default RTS is disabled in a normal environment supports non jumbo frames Sales Mail issales cerio com tw Support sul cerio co
40. specified here in the Minimum Contention Window is the upper limit in milliseconds of a range from which the initial random backoff wait time is determined z x e sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw Cerio Corporation v CWmax Maximum Contention Window The value specified here in the Maximum Contention Window is the upper limit in milliseconds for the doubling of the random backoff value This doubling continues until either the data frame is sent or the Maximum Contention Window size is reached Once the Maximum Contention Window size is reached retries will continue until a maximum number of retries allowed is reached Valid values for the cwmax are 1 3 7 15 31 63 127 255 511 or 1024 The value for cwmax must be higher than the value for cwmin o AIFS The Arbitration Inter Frame Spacing Number specifies a wait time in milliseconds for data frames TxOP Limit Transmission Opportunity is an interval of time when a WME AP has the right to initiate transmissions onto the wireless medium WM This value specifies in milliseconds the Transmission Opportunity TXOP for AP that is the interval of time when the WMM AP has the right to initiate transmissions on the wireless network ACM bit Admission Control Mandatory ACM only takes effect on AC_VI and AC_VO When you do not click Checkbox it means that the AC
41. the fact that distance between two radio links may vary in different deployment ACK Timeout makes significant influence in performance of long distance radio link If ACK Timeout is set too short transmitter will start to Resend packet before ACK is received and throughput become low due to excessively high re transmission ACK Timeout is best determined by distance between the radios data rate of average environment The Timeout value is calculated based on round trip time of packet with a little tolerance So if experiencing re transmissions or poor performance the ACK Timeout could be made longer to accommodate gt Slot Time and ACK Timeout settings are for long distance links It is important to Notice tweak settings to achieve the optimal result based on requirement Beacon Interval Beacon Interval is in the range of 40 3500 and set in unit of millisecond The default value is 100 msec Access Point AP in IEEE 802 11 will send out a special approximated 50 byte frame called Beacon Beacon is broadcast to all the stations provides the basic information of AP such as SSID channel encryption keys signal strength time stamp support data rate All the radio stations received beacon recognizes the existence of such AP and may proceed next actions if the information from AP matches the requirement Beacon is sent on a periodic basis the time interval can be adjusted By increasing the beacon interval you can redu
42. variables that allow for the maximum data rate Table C MCS Data Rate Note gt When MCS 32 only Short Guard Interval option is supported Channel Bandwidth 20 is not supported If Channel Bandwidth 40 the HT duplicate 6Mbps gt When MCS 0 7 One Tx Stream Guard Interval and Channel Bandwidth are supported gt When MCS 8 15 Two Tx Stream Guard Interval and Channel Bandwidth are supported iai Sales Mail issales cerio com tw _ Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw_ Cerio Corporation Appendix D Enabling UPnP in Windows XP I Open the Add Remove Programs control panel and then click on Add Remove Windows Components in the sidebar Scroll down and find Networking Services highlight it and then click Details Windows Components Wizard windows Components fou can add or remove components of Windows XP To add of remove a component click the checkbox 4 shaded box means that only part of the component will be installed To see what s included in a component click Details Components O sat Message Queuing 9 Other Network File and Print Services Ml EH Cutlonk Fxnress Description Contains a variety of specialized network related services and protocols Total disk space required Fb 8 ME
43. 168 2 254 gt Protocol Select Any or specify protocol TCP UDP ICMP Content Filter and Application from drop down list When you select ICMP or Layer 7 Application the Local LAN Destination Port can not used Protocol Local Fort stination Port UDP IChAP Saas Content Filter Application sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Cerio Corporation If you want to block websites with specific URL address or using specific keywords enter each URL or keyworks in the Content Filter field and click Add button to add in the Content Filter list of each rule Click Remove button can remove URL or keywords ae Comcent Filter zex wot facebook com Remove Local Port Specify local port LAN port range required for this rule Destination Port Specify destination port range required for this rule Schedule Can choose to use rule by Time Policy VV Y WV Service Check Enable button to activate this rule and Disable to deactivate Click Add button to add control rule to List There are 10 rules maximum allowed in this Control List All rules can be removed or edited on the List Click Reboot button to activate your changes 8 6 QoS Quality of Service QoS refers to both a network s ability to deliver data with minimum delay and the networking methods used to control the use of bandwidth
44. 2 1 DHS Information Trafic Monitor WiFi On Band 80 11 bigin Channel 5 Cata Rate Auto 300M b s Copy Fag 202 CO Pgh Fc ved The setup wizard is designed to be an easy to use utility that allows quick modification of the OW 300N2 UI Web based GUI interface settings The wizard should take no longer than 5 minutes to use Please be aware that the wizard doesn t give full access to all the setup options in OW 300N2 in Outdoor PoE Bridge Router AP This is purely because the wizard has been designed for a quick and easy setup aimed at all users More advanced users can configure the remaining settings using the advanced settings options from the setup menu gt Chose Your Operating Mode OW 300N2 supports six operational modes AP and AP WDS mode WDS mode Client Bridge Repeater AP mode Router AP mode WISP and WISP Repeater AP mode etc respectively with built in remote management features Copyright 2015 by Cerio Corporation All rights reserved sales Mail issales cerio com tw Support suppori cerio com tw Operating Mode AP Mode wos Mode clientBrid ge Repeater SP Mode Router AP Mode wop re peater AF Mode gt Wizard Guide Please click on System gt Setup Wizard gt Next and follow the below guide system wireless Y Adiva Operating Mode Setup Wizard LAM Setup VLAN Setup Management Time Server SA heAP 1 Follow And Guide Continuing Sett
45. ANGOA 192 168 2 254 LAN cas Network I WAN Area rd vias Oc ateway interface Distribute RIP over OSPF Ml Protocol Ml ospr E Rir RIP Settings Save Clear RIP Service Enable E Disable static Routing List Side ETTAN Status Destination Net Mask Yia OSPF RIP Actions Han No items in the list Distribute OSPF over RIP Ml Save Clear OSPF Settings OSPF Settings OSPF Service Enable Disable eae 192 160 2254 LAN P etir OF k d Wi D i J pan req Bean Distribute RIP over OSPF d gt OSPF Service By default it s Disable To Enable to activated OSPF routing service gt Route ID The router ID is typically derived by each router from its interface IP address gt Distribute RIP over OSPF Allow RIP routes will redistributed into OSPF RIP Settings RIP Settings RIP Service Enable Disable F i g Ey d Wit a J LAN Distribute OSPF over RIP sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw ETO gt RIP Service By default it s Disable To Enable to activated RIP routing service gt Side Specify desired interface WAN LAN for sending and receiving of RIP packets gt Distribute OSPF over RIP Allow OSPF routes redistributed into RIP Change these settings as described here and click Save button to save your changes Click Reboot button to activate your changes Static Routing S
46. Control Mandatory ACM only takes effect on AC_VI and AC_VO When you do not click Checkbox it means that the ACM is controlled by the connecting AP If you click Checkbox it means that the Client is in charge v No ACK policy bit Acknowledgment Policy WWMM defines two ACK policies Normal ACK and No ACK Click Checkbox indicates No ACK When the no acknowledgement No ACK policy is used the recipient does not acknowledge received packets during wireless packet exchange This policy is suitable in the environment where communication quality is fine and interference is weak While the No ACK policy helps improve transmission efficiency it can cause increased packet loss when communication quality deteriorates This is because when this policy is used a sender does not retransmit packets that have not been received by the recipient When the Normal ACK policy is used the recipient acknowledges each received uncast packet 3 6 WDS Setup The administrator could create WDS Links to expand wireless network When WDS is enabled access point functions as a wireless bridge and is able to communicate with other access points via WDS links A WDS link is bidirectional and both side must support WDS Access points know each other by MAC Address In other words each access point needs to include MAC address of its peer Ensure all access points are configured with the same channel and own same security type settings Sales Mail
47. Disable Edit Disabled Edit Disable Edit VAP Display number of system s Virtual AP MAC Address The MAC address of the VAP Interface is displayed here When you enable AP and reboot system the MAC address will display here ESSID Display Virtual AP s ESSID default is APOO APO7 Status Display VAP status default VAPO is always on and only VAPO can support WPS function Security Type Display Virtual AP s Security Type default is disabled MAC Filter Setup Click Setup button for configuring Virtual AP s Access Control List VAP Edit Click Edit button for configuring Virtual AP s settings and security type Change these settings as described here and click Save button to save your changes Click Reboot button to activate your changes z x e sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO 2 7 Virtual AP General Configuration For each Virtual AP administrators can configure general settings and security type Click Wireless gt Virtual AP Setup click Edit of Virtual AP List and then Virtual AP Configuration page appears Virtual AP Overview VAP List YAP MAC Address ES31D Status Security Type VAPO OO TAS OO O00 APOO IPAS PSK Edit YAPI APOL Disabled Edit APD Ott Disabled Edit APOS Disabled Edit APO4 Off Disabled Edit YAPS APUS Disabled Edit VAPE APOE Ott Disabled Edit YAP AP
48. IFS The Arbitration Inter Frame Spacing Number specifies a wait time in milliseconds for data frames TxOP Limit Transmission Opportunity is an interval of time when a WME AP has the right to initiate transmissions onto the wireless medium WM This value specifies in milliseconds the Transmission Opportunity TXOP for AP that is the interval of time when the WMM AP has the right to initiate transmissions on the wireless network ACM bit Admission Control Mandatory ACM only takes effect on AC_VI and AC_VO When you do not click Checkbox it means that the ACM is controlled by the connecting AP If you click Checkbox it means that the Client is in charge No ACK policy bit Acknowledgment Policy WWMM defines two ACK policies Normal ACK and No ACK Click Checkbox indicates No ACK When the no acknowledgement No ACK policy is used the recipient does not acknowledge received packets during wireless packet exchange This policy is suitable in the environment where communication quality is fine and interference is weak While the No ACK policy helps improve transmission efficiency it can cause increased packet loss when communication quality deteriorates This is because when this policy is used a sender does not retransmit packets that have not been received by the recipient When the Normal ACK policy is used the recipient acknowledges each received uncast packet Sales Mail issal sales cerio com tw
49. K is short for W Fi Protected Access Pre Shared Key WPA SPK uses the same encryption way with WPA and the only difference between them is that WPA PSK recreates a simple shared key instead of using the user s certification WPA General Cipher Suite acs tar Group Key Update Period coo Master Key Update Period Bein Key Type asc Hex RENAA erouer manual lt Cipher Suite You can chose use AES or TKIP with your WPA WPA2 encryption method sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw AES is short for Advanced Encryption Standard The AES cipher is specified as a number of repetitions of transformation rounds that convert the input plaintext into the final output of ciphertext Each round consists of several processing steps including one that depends on the encryption key A set of reverse rounds are applied to transform ciphertext back into the original plaintext using the same encryption key TKIP is short for Temporal Key Integrity Protocol TKIP scrambles the keys using a hashing algorithm and by adding an integrity checking feature ensures that the keys haven t been tampered with Group Key Update Period This time interval for re keying GTK broadcast multicast encryption keys in seconds Enter the time length required the default time is 600 seconds Master Key Update Period This time interval for re keyi
50. M is controlled by the connecting AP If you click Checkbox it means that the Client is in charge No ACK policy bit Acknowledgment Policy WWMM defines two ACK policies Normal ACK and No ACK Click Checkbox indicates No ACK When the no acknowledgement No ACK policy is used the recipient does not acknowledge received packets during wireless packet exchange This policy is suitable in the environment where communication quality is fine and interference is weak While the No ACK policy helps improve transmission efficiency it can cause increased packet loss when communication quality deteriorates This is because when this policy is used a sender does not retransmit packets that have not been received by the recipient When the Normal ACK policy is used the recipient acknowledges each received uncast packet Sales Mail issales cerio com tw Support sul ia cero com tw LT Copyright 2015 by Cerio CezIO 2 6 Create Virtual AP Virtual AP Setup The administrator can create Virtual AP via this page Please click on Wireless gt Virtual AP Setup and follow the below setting Virtual AP Overview VAP List YAP MAC Address Security Type MAC Filter Edit MAC Filter Status YAP Edit VAPO OO TAS OO O00C IPAS PSK Edit Disable Edit YAPI Disabled Edit Disable Edit VAP2 Ott Disabled Edit Disable Edit Disabled Edit Disable Edit Disabled Edit Disable Edit Disabled Edit Disable Edit Disabled Edit
51. MAC address of WAN port on the system Clone MAC Address If you want to clone the MAC address of the PC then click the Clone MAC Address button The system will automatically detect your PC s MAC address gt The Clone MAC Address field will display MAC address of the PC Notice connected to system Click Save button can make clone MAC effective Manual MAC Address Enter the MAC address registered with your ISP Click Save button to save your changes Click Reboot button to activate your changes e ars a n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO 5 3 Configure DDNS Setup Dynamic DNS allows you to map domain name to dynamic IP address Please click on System gt DDNS Setup and follow the below setting Dynamic DNS Setup DONS Service Enable Disable Service Provider Hostname a Username Password Enabled By default its Disable The mapping domain name won t change when dynamic IP changes The beauty of it is no need to remember the dynamic WAP IP while accessing to it Service Provider Select the preferred Service Provider from the drop down list including dyndns dhs ods and tzo Hostname Host Name that you register to Dynamic DNS service and export User Name amp Password User Name and Password are used to login DDNS service Click Save button to save your changes Clic
52. O Disabled Edit YAPO Setup Security Hidden 551D Enable Disable Client Isolation Enable Disable SPP Enable Disable Maximum Clients VLAN ID Tag FS viens ro Security Type Ps WDS Setup Service L Enable Disable Enable WDS Peer s MAC Address Description a fF Fg tT a E fF Ff E fF fF ee tT a E E E E B MAC Filter Edit RAAC Filter Status Disable Disable Disable Disable Disable Disable Disable Disable YAP Edit Edit Edit Edit Edit Edit Edit Edit Edit ESSID Extended Service Set ID indicates the SSID which the clients used to connect to the VAP ESSID will determine the service type of a client which is assigned to the specified VAP Copyright 2015 by Cerio Corporation All rights reserved sales Mail issales cerio com tw Support suppori cerio com tw ERIO Hidden SSID Select this option to enable the SSID to broadcast in your network When configuring the network it is suggested to enable this function but disable it when the configuration is complete With this enabled someone could easily obtain the SSID information with the site survey software and get unauthorized access to a private network With this disabled network security is enhanced and can prevent the SSID from begin seen on networked Client Isolation Select Enable all clients will be isolated from each other that means all clients can not reach to other
53. P Setup click Edit of Virtual AP List and then Virtual AP Configuration page appears l Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO Virtual AP Overview VAP List YAP MAC Address ESSID Status Security Type MAC Filter Edit MAC Filter Status YAP Edit VAPO OOLDAS OOOO AFAD WPA PS ke Edit Disable Edit YAPI APOL Disabled Edit Disable Edit APO Disabled Edit Disable Edit APOS Disabled Edit Disable Edit APO 4 Disabled Edit Disable Edit YAPS APOS Disabled Edit Disable Edit VAPG APOE Disabled Edit Disable Edit YAP APO Disabled Edit Disable Edit YAPO Setup coe Security ES SID Bey Hidden ssc Enable Client Isolation 0 Enable pp Enable o Disable Disable Disable Maximum Clients i Security Type ss WDS Setup Service O Enable Disable Enable WDS Peer s MAC Address z E a a E of fF EF UE E EE eee ee Description ESSID Extended Service Set ID indicates the SSID which the clients used to connect to the VAP ESSID will determine the service type of a client which is assigned to the specified VAP sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Cerio Corporation Hidden SSID Select this option to enable the SSID to broadcast in your network When configuring the network it is suggested t
54. Policy bit d al d d ACKA bit Ho ACK Policy bit a AC VI Video High Minimum delay Time sensitive video data is automatically sent to this queue AC _ VO Voice High Time sensitive data like VolP and streaming media are automatically sent to this queue sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Cerio Corporation v CWmin Minimum Contention Window This parameter is input to the algorithm that determines the initial random backoff wait time window for retry of a transmission The value specified here in the Minimum Contention Window is the upper limit in milliseconds of a range from which the initial random backoff wait time is determined CWmax Maximum Contention Window The value specified here in the Maximum Contention Window is the upper limit in milliseconds for the doubling of the random backoff value This doubling continues until either the data frame is sent or the Maximum Contention Window size is reached Once the Maximum Contention Window size is reached retries will continue until a maximum number of retries allowed is reached Valid values for the Ccwmax are 1 3 7 15 31 63 127 255 511 or 1024 The value for cwmax must be higher than the value for cwmin AIFS The Arbitration Inter Frame Spacing Number specifies a wait time in milliseconds for data frames TxOP Limit Transmission Opportunity i
55. S Enable Click Enable checkbox to create WDS link WDS Peer s MAC Address Enter the MAC address of WDS peer Description Description of WDS link Y Y VvV WV Change these settings as described here and click Save button to save your changes Click Reboot button to activate your changes 2 9 WDS Status The Peers MAC Address antenna 0 1 received signal strength phy mode and channel bandwidth for each WDS are available WDS Link Status MAC Address RSSI TAJRX Rate TAIRX SEQ TASRX Bytes Mo VWOS Link z a oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw n m m Y vV Vv gt IO MAC Address Display MAC address of WDS peer RSSI Indicate the RSSI of the respective WDS s link TX RX Rate Indicate the TX RX Rate of the respective WDS s link TX RX SEQ Indicate the TX RX sequence of the respective WDS s link 2 10 Associated Clients The administrator can obtain detailed wireless information and all associated clients status via this page Please click on Wireless gt Associated Clients The the Associated Clients Status appears Associated Client Status Wireless Information YAP E SID Status security Type Clients WAPO APOO IPAS PSE YAPI APO1 Disabled VAP2 APO Off Disabled APO3 Disabled APO4 Ott Disabled APOS Disabled APO Ott Disabled APO Disabled Wireless Information Display the Virtual AP configuratio
56. S Link Status MAC Address RSSI TX RX Rate TXFRX SEQ TXARX Bytes Mo WOS Link MAC Address Display MAC address of WDS peer RSSI Indicate the RSSI of the respective WDS s link TX RX Rate Indicate the TX RX Rate of the respective WDS s link TX RX SEQ Indicate the TX RX sequence of the respective WDS s link Y VV WV 4 Client Bridge Repeater AP Mode Configuration When Client Bridge Repeater AP Mode is chosen the system can be configured as an Client Bridge Repeater AP Model This section provides detailed explanation for users to configure in the Client Bridge Repeater AP Mode with help of illustrations In the Client Bridge Repeater AP Mode functions listed in the table below are also available from the Web based GUI interface 4 1 Chose Your Operating Mode Client Bridge Repeater AP The system administrator can set the desired mode via this page and then configure the system according to their deployment needs Please click on System gt Operating Mode and follow the below setting Operating Mode oP Mode WOS Mode i ClientBridge Repeater AF Mode Router 4P bode AIP Re peater AF Mode z a oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO 4 2 External Network Connection Network Requirement It can be used as an Client Bridge or Repeater AP to receive wireless signal over last mile applicat
57. Scan AP List Sate Auto s Short G Disable Enable Aggregation Disable Enable Aggregation Frame _ _ Aggregation Size MAC Address The MAC address of the Wireless interface is displayed here Band Mode Select an appropriate wireless band bands available are 801 11 b g n mixed mode Country a region the OW 300N2support region for US ETSI and Japan Channel Choosing the best WiFi channel lt Auto Scan Smart channel judgment the function can auto choose use best Channel lt AP List the function support search neighborhood AP and print site survey list E SID MAC Address Channel signali Moise dE m 4 Signal Quality 5 Encryption Danny 002P 0r IF i0 100 On Current Frequency 2 432 GHz Channel 5 Rescan Close 1X Power You can adjust the output power of the system to get the appropriate coverage for your wireless network Specify digit numbers between level 7 to level 9 the unit is for your environment If you are not sure which setting to choose then keep the default setting level 9 100 gt HT Physical Mode HT Physical Mode THIRX Stream 1 o gt Channel Bandvvidth 20 20 40 Extension Channel o pper Lower MICS Short GL Disable Enable egatian 0 Disable Enable Aggregation Size Bi HT TxStream RxStream By default it s 2 Channel Bandwidth The 20 40 MHz option is usually best The other option is available for
58. U setting v PPTP The Point to Point Tunneling Protocol PPTP mode enables the implementation of secure multi protocol Virtual Private Networks VPNs through public networks e es a 5 Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw gt gt gt gt Internet Connection Type Mode staticie oynamicie pppoe IP Address IP Metmask PPTP Server IP Address Username Password Reconnect Mode Always On ontbemand Manual Idle Time o i utes GIH 1460 MPPE Encryption Ml MPPE 4o MB aPPE 128 IP Address The IP address of the WAN port IP Netmask The Subnet mask of the WAN port PPTP Server IP Address The IP address of the PPTP server User Name Enter User Name for PPTP connection Password Enter Password for PPTP connection Reconnect Mode Always on A connection to Internet is always maintained On Demand A connection to Internet is made as needed Mod When Time Server is enabled at the On Demand mode the Reconnect Mode will turn out Always on Manual Click the Connect button on WAN Information in the Overview page to connect to the Internet Idle Time Time to last before disconnecting PPPoE session when it is idle Enter preferred Idle Time in minutes Default is 0 indicates disabled When Idle time is disabled the Reconnect Mode will turn out Alw
59. UI Valid Characters continued ESSID Length 31 Space 0 9 A Z a z G _ lt gt 5 Maximum Clients 1 32 VLAN ID 1 4094 WEP Key 10 26 HEX chars or 5 13 ASCII chars Group Key Update Period gt 60 seconds PMK Cache Period gt 0 minute Pre Shared Key 8 63 ASCII chars 64 HEX chars Radius Server IP IP Format 1 254 Radius Port 1 655935 Shared Secret 8 64 characters Session Timeout gt 60 seconds 0 is disable WEP Key 10 26 HEX chars or 5 13 ASCII chars TKIP Key 8 63 ASCII chars 64 HEX chars AES Key 8 63 ASCII chars 64 HEX chars Peer s MAC Address 12 HEX chars Description 32 chars Source Address IP Format 1 254 Source Mask 0 32 Source Port 1 65535 Destination Address IP Format 1 254 Destination Mask 32 Destination Port 1 65535 MAC address MAC Format 12 HEX chars Description 32 chars Private IP IP Formate 1 254 Private Public Port 1 65535 IP Address IP Format 1 254 Comment 32 chars MAC Address MAC Format 12 HEX chars Local Destination IP IP Formate 1 254 Local Destination Port 1 65535 Upload amp Download 8 8192 digital number oOrporation AN Fignts reserved anirai Cerio Corporation Appendix C MCS Data Rate The table below shows the relationships between the
60. UppOrimMceno com tw Copyright 2015 by Cerio Corporation All rights reserved 6 8 Site Survey Use this tool to scan and locate WISP Access Points and select one to associate with Please click on Wireless gt Site Survey Below depicts an example for site survey Please Wait AP Site Survey List a B MAC Address signali Moise dE m RSSI Signal Quality Channel Security Select Danny OO 23 Fo0F LF 10 38 7 95 57 100 6 WYP PSEAAES select F904 feECDIGEB 4 00 89 f 11 b WPA PSK AES Select cht 4irs CHECO AREATA 917 95 4 40 1 WTP PS EASES Select ESSID Available Extend Service Set ID of surrounding Access Points MAC Address MAC addresses of surrounding Access Points Signal Noise dBm Received signal strength of all found Access Points RSSI Indicate the RSSI of the respective client s association Signal Quality Received signal strength of all found Access Points Channel Channel numbers used by all found Access Points Security Security type by all found Access Points VV VV VV V WV Select Click Select to configure settings and associate with chosen AP While clicking Select button in the Site Survey Table the ESSID and Security Nine Type will apply in the Wireless General Setup However more settings are needed including Security Key a ae Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Sup
61. WEP Wired Equivalent Privacy is a data encryption mechanism based on a 64 bit 128 bit or 152 bit shared key Select WEP as the security type from the drop down list as desired Sales Mail issales cerio com tw IPPOr SUPPOMCENO COM AN Copyright 2015 by Cerio Corporation All rights reserved hd i ihasta ni Rey Length Edhits f WEP Auth Method W c pen system E o key Index iik lt Key Length The key size of WEP encryption can be 64bit 128bit or 152bit lt WEP auth method You can select the appropriate value Open system If enabling this mode there is no need authentication to access AP or Wireless NIC or Shared Only those who are sharing the same key with the AP can connect with it lt Key Index You can select the Key which you want to use Other wireless station must have the same key value to connect with OW 300N2 4 different WEP keys can be configured at the same time but only one is used Effective key is set with a choice of WEP Key 1 2 3 or 4 lt WEP Key You can chose either HEX or ASCII for your WEP key value for 64bit encryption strength can use 10 digits for HEX 0 9 a f and A F or 5 digits for ASCII 0 9 a z and A Z for 128bit encryption strength can use 26 digits for HEX 0 9 a f and A F or 13 digits for ASCII O 9 a z and A Z for 152bit encryption strength can use 32 digits for HEX O 9 a f and A F or 16 digits for ASCII O 9 a z and A Z WPA PSK or WPA2 PSK WPA PS
62. a new connection i L H Atheros ARSOOGES Wireless M Set up a home ar small office network Status Change Windows Firewall Repair settings Bridge Connections See Also Create Shortcut Delete WW Network Troubleshooter Rename Properties Other Places g Control Panel t My Network Places My Documents 7 My Computer Sales Mail issales cerio com tw suppor SUpporii ceno com tw Copyright 2015 by Cerio Corporation All rights reserved Cerio Corporation ii In Local Area Connection Properties window select Internet Protocol TCP IP and click on Properties button Local Area Connection Properties General Advanced Connect using BS NVIDIA nForce Networking Controller Thiz connection uses the following thems I oS Packet Scheduler T A Bite IHE Internet Protocal TCP IP Install Uninstall Description Transmission Control Protocol lntemet Protocol The default Wide area network protocol that provides communication across diverse interconnected networks C Show icon in notification area when connected Notify me when this connection has limited or no conmectryity iv Select Use the following IP address and type in IP address 192 168 2 100 Subnet mask 255 255 255 0 Internet Protocol TCP IP Properties General fou can get IP settings assigned automatically if your network supports this capability Othenvise you need to ask your n
63. able button to activate this function or Disable to deactivate this service Start IP End IP Specify the range of IP addresses to be used by the DHCP server when assigning IP address to clients The default range IP address is 192 168 2 10 to 192 168 2 70 the netmask is 255 255 255 0 DNS1IP Enter IP address of the first DNS server this field is required DNS2 IP Enter IP address of the second DNS server this is optional WINS IP Enter IP address of the Windows Internet Name Service WINS server this is optional r ns A p Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Domain Enter the domain name for this network Lease Time The IP addresses given out by the DHCP server will only be valid for the duration specified by the lease time Increasing the time ensure client operation without interruptions but could introduce potential conflicts Lowering the lease time will avoid potential address conflicts but might cause more interruptions to the client while it will acquire new IP addresses from the DHCP server Default is 86400 seconds Click Save button to save your changes Click Reboot button to activate your changes 6 5 Configure DDNS Setup Dynamic DNS allows you to map domain name to dynamic IP address Please click on System gt DDNS Setup and follow the below setting Dynamic DNS Setup DONS Service Enable
64. ackets that have not been received by the recipient When the Normal ACK policy is used the recipient acknowledges each received uncast packet 4 6 Site Survey Use this tool to scan and locate WISP Access Points and select one to associate with Please click on Wireless gt Site Survey Below depicts an example for site survey Please Wait ESD MAC Address Signall Moise dE m RSSI Signal Quality 2 Channel Security Danny OO a FeO a 40 95 55 idiss 6 VWAPA PSE AAES F LLE LEN f CD 6E 6 4 00 39 11 6 WPA PSK AES ESSID Available Extend Service Set ID of surrounding Access Points MAC Address MAC addresses of surrounding Access Points Signal Noise dBm Received signal strength of all found Access Points RSSI Indicate the RSSI of the respective client s association Signal Quality Received signal strength of all found Access Points Channel Channel numbers used by all found Access Points Security Security type by all found Access Points VV VV VV V WV Select Click Select to configure settings and associate with chosen AP While clicking Select button in the Site Survey Table the ESSID and Security Nore Type will apply in the Wireless General Setup However more settings are needed including Security Key Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO 4 7 Station Profile Sta
65. al applications and rely on best effort parameters for traditional IP data Sales Mail issal sales cerio com tw UppOrimMceno com tw Copyright 2015 by Cerio Corporation All rights reserved i CEFO As an Example time sensitive Voice amp Video and multimedia are given effectively higher priority for transmission lower wait times for channel access while other applications and traditional IP data which are less time sensitive but often more data intensive are expected to tolerate longer wait times WM Qos Whi Parmameters of Access Point AC Type CV min CV max AIFS TxOp Limit ACM bil Mo ACK Policy bit AC BE O a AC_BK 1 3008 al d AC YO 3 L504 Wikked Parmameters of Station AC Type CW min CW max AIFS TxOp Limit ACK bit No ACK Policy bit j AC BECO Al BKL Ac Y2 H v AC Type AC_BK Background Low High throughput Bulk data that requires maximum throughput and is not time sensitive is sent to this queue FTP data for example AC_BE Best Effort Medium Medium throughput and delay Most traditional IP Ma eee ere AC_VI Video High Minimum delay Time sensitive video data is a A ei AC_VO Voice High Time sensitive data like VoIP and streaming media fee anaana oma v CWmin Minimum Contention Window This parameter is input to the algorithm that determines the initial random backoff wait time window for retry of a transmission The value
66. amic IP Dynamic IP v Hostname The Hostname of the LAN port sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw e710 gt DNS Check either No Default DNS Server or Specify DNS Server IP button as desired to set up the system DNS ONS QO No Default ONS Server 5 pecify ONS Server IF Primary ONS i Secondary ONS ia Primary The IP address of the primary DNS server Secondary The IP address of the secondary DNS server gt 802 1d Spanning Tree The spanning tree network protocol provides a loop free topology for a bridged LAN between LAN interface and 8 WDS interfaces from wds0O to wds7 The Spanning Tree Protocol which is also referred to as STP is defined in the IEEE Standard 802 1d 604 ld Spanning Tree SEVICE Enable o Disable CEE ey Remote Base Station a TAZ 165 28 Sp ote OW SO0N2 h G2 168 2 250 Tree Protocol aes De pe i 192 166 2251 192 166 2253 Base Station Remote Dase Station pa jm Click Save button to save your changes Then click Reboot button to activate your changes 3 4 Wireless General Settings The administrator can change the data transmission channel and output power settings for the system Please click on Wireless gt General Setup and follow the below setting n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation
67. ate Disabled e Ve Action Select the desired access control type from the drop down list the options are Disable Allow or Reject v Only Allow List MAC Define certain wireless clients in the list which will have granted access to the Access Point while the access will be denied for all the remaining clients Action Type is set to Only Allow List MAC v Only Deny List MAC Define certain wireless clients in the list which will have denied access to the Access Point while the access will be granted for all the remaining clients Action Type is set to Only Deny List MAC z a oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw gt Notice MAC Access Control is the weakest security approach WPA or WPA2 Notice security methods should be used when possible 2 8 WDS Setup Expand your Wireless Network The administrator can create WDS Links for expanding wireless network via this page When you enable WDS function in AP Mode both Wireless and Ethernet user can connect your local network at the same time through OW 300N2 Please click on Wireless gt Virtual AP Setup click Edit of Virtual AP List and follow the below setting WDS Setup Service _ Enable Disable WDS Peer s MAC Address Description E E E EE E E E E B E E EEE E E E E B Service By default it s Disable To Enable to activate WD
68. ays on MTU By default it s 1460 bytes MTU stands for Maximum Transmission Unit Consult with WISP for a correct MTU setting MPPE Encryption Microsoft Point to Point Encryption MPPE encrypts data in Point to Point Protocol PPP based dial up connections or Point to Point Tunneling Protocol PPTP virtual private network VPN connections 128 bit key strong and 40 bit key standard MPPE encryption schemes are supported MPPE provides data security for the PPTP connection that is between the VPN client and the VPN server z x e sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw DNS Check No Default DNS Server or Specify DNS Server IP radial button as desired to set up system DNS DNS O No Default ONS Server specify OMS Server IP Primary DNS i v Primary The IP address of the primary DNS server v Secondary The IP address of the secondary DNS server NAT The NAT support Enable and Disable Service Se Pie Enable Disable MAC Clone The MAC address is a 12 digit HEX code uniquely assigned to hardware as identification Some ISPs require you to register a MAC address in order to access to Internet If not you could use default MAC or clone MAC from a PC MAC Clone ke ep Default MAC Address Clone MAC Address d ciddiea 02ichiec ceca if ff f fF fo Keep Default MAC Address Keep the default
69. bsite to access the system s WMI The system s Overview page will appear Sales Mail issales cerio com tw Copyright 2015 by Cerio t O COM cE 7 2 Configure System Time System time can be configured via this page and manual setting or via a NTP server is supported Please click on System gt Time Server and follow the below setting Time Server Setup system Time Local Time 19707 01701 00 37 43 Setup Time Use NTP Lacie nae tinestdtimegov tw fhint Ey NTP Server Moraes GMT Dublin Edinburgh lisbon London Daylight Saving Time User Setup Date Time EE ET GMT 8 00 Set Time Set Time Local Time Display the current system time Setup Time Use NTP To synchronize the system time with NTP server Default NTP Server NTP Server Select the NTP Server from the drop down list Time Zone Select a desired time zone from the drop down list VV VV WV Daylight saving time Enable or disable Daylight saving Oy If the system time from NTP server seems incorrect please verify your network settings Notice jike default Gateway and DNS settings gt User Setup The management can set time by system time Date Setting the date for system Time Setting the time for system Click Save button to save your changes Click Reboot button to activate your changes z x e sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved
70. btain the system information remotely Please click on System gt SNMP and follow the below setting l i Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO SNMP Setup SN MIP wac Enable d SAMIP wa Enable d SNMP Trap Enable W gt SNMP v2c Enable Check to enable SNMP v2c SNMP vee Enable Sal ra commun it ro community Set a community string to authorize read only access rw community Set a community string to authorize read write access gt SNMP v3 Enable Check to enable SNMP vs SNMPv3 supports the highest level SNMP security SA MP wa Enable r SMMP ro user SARIP ro password SAIRAIP pov user SMBIP ru password SNMP ro user Set a community string to authorize read only access SNMP ro password Set a password to authorize read only access SNMP rw user Set a community string to authorize read write access SNMP rw password Set a password to authorize read write access gt SNMP Trap Events such as cold start interface up amp down and association amp disassociation will report to an assigned server sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw SA MIP Trap Enable a Community Community Set a community string required by the remote host computer that will receive trap messages
71. by changing RTS threshold is to reduce possible collisions due to hidden wireless clients RTS in AP will be enabled automatically if the packet size is larger than the Threshold value By default RTS is disabled in a normal environment supports non jumbo frames Short Preamble By default its Enable To Disable is to use Long 128 bit Preamble Synchronization field The preamble is used to signal here is a train of data coming to the receiver The short preamble provides 72 bit Synchronization field to improve WLAN transmission efficiency with less overhead IGMP Snooping the process of listening to Internet Group Management Protocol IGMP network traffic The feature allows a network switch to listen in on the IGMP conversation between hosts and routers By listening to these conversations the switch maintains a map of which links need which IP multicast streams Multicasts may be filtered from the links which do not need them and thus controls which ports receive specific multicast traffic Greenfield In wireless WLAN technology greenfield mode is a feature of major components of the 802 11n specification The greenfield mode feature is designed to improve efficiency by eliminating support for 802 11b g devices in an all draft n network In greenfield mode the network can be set to ignore all earlier standards Sales Mail issales cerio com tw Support sul cerio com tw JODO Copyright 2015 by Cerio Corpor Hl
72. c Wireless re transmission IEEE 802 111 Preauth PMKSA Cache IEEE 802 11h TPC Transmission Power Control IEEE 802 11d Multi country roaming Channel Bandwidth setting 20MHz or 20 40MHz HT Tx Rx Stream selection 1 or 2 Short Slot support Authentication Encryption Wireless Security VV VV VV V WV Blocks client to client discovery within a specified VLAN WEP 64 128 bit EAP TLS Dynamic WEP EAP TTLS Dynamic WEP PEAP MSPEAP Dynamic WEP WPA PSK TKIP WPA 802 1x TKIP 802 111 WPA2 PSK CCMP AES 128 256bit WPA2 802 1x CCMP AES 128 256bit No of registered RADIUS servers 1 Setting for TKIP CCMP AES 128 256bit ASCII 63 amp HEX 64 key s refreshing period Hidden SSID broadcast support and VLAN assignment on BSSID Access Control list ACL by MAC Address Quality of Service gt gt Download and Upload traffic control and support Traffic Analysis and Statistics Packet classifications via DSCP Differentiated Services Code Point and Support IEEE802 11e WMM Sales Mail issal LT es cerio com tw haceno com tw Cerio Corporation gt Control Policy by IP IP Ranges MAC Service Layer 7 Protocol Support gt No of Max Policy setting 10 gt DiffServ TOS IEEE 802 11p COS IEEE 802 1Q Tag VLAN priority control Parental Control gt Blocking Control Policy by IP Range MAC Group Port Layer 7 Protocol gt URL Blocking Management gt Web Based management in
73. ccccccccsesesssssseeesesesssececeeesseeseessesssseeeeeesesesees 20 2 5 Configure Wireless Advanced Setup 0 ccc cceccccccccccceesssssseeeeceeeeesesseeeeeeeeeens 22 2 6 Create Virtual AP Virtual AP Setup uu0 cssssssssceseseesseeessseseeeees 28 2 8 WDS Setup Expand your Wireless Network 0000000cccccccccccccccsssssseeeeceeeesesssaeees 36 2 9 WDS StatUS cic 2acoseceaaccconissaseasdeanoeestacotsnadadaccoudeonsaantnnsteesbacoientdaanecesdemseasbesstiesbaceseneiaaseemtease 36 2 10 PAS SOCIAL OC Ch ntS cro essscacresisasecs iedosare neice iira an i AA EET OIE ETET 37 WDS Mode Configuration sssssssscccceeecessssococcccceeeesssococcceeeeeessssocccccceeeeesssssseo 38 3 1 Chose Your Operating Mode WDS Mode cc cccccceccceessseeeceeesssseeeeeessaaes 38 3 2 External Network Connection Network Requirement ccceeecceeessreeeees 38 3 0 Configure OW 300N2 LAN IP Address 0000000000 cceccccccccccceeesssssseeeeceeesssesssseeeeeees 38 3 4 Wireless General Settings 0 ccc cccccccsssssseeecceceeesssssseeeccesesesesseeeeceeeseeessaaees 40 3 5 Configure Wireless Advanced Setup eeesesessserrrrsssesrrrrrrsssssrrrerressssrrrrerrsssssrrrree 42 3 6 14 B Does U ena ne eo ee eee ee 47 3 7 WDS SIUS ee E A 49 Client Bridge Repeater AP Mode Configuration sssseeeessssssocsceeccesees 49 4 1 Chose Your Operating Mode Client Bridge Repeater AP 0 0 ee
74. ce the number of beacons and associated overhead but that will likely delay the association and roaming process because stations scanning for available access points may miss the beacons You can decrease the beacon interval which increases the rate of beacons This will make the association and roaming process very responsive however the network will incur additional overhead and throughput will go down Sales Mail issal sales cerio com tw upport cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Cerio Corporation gt DTIM Interval The DTIM interval is in the range of 1 255 The default is 1 DTIM is defined as Delivery Traffic Indication Message It is used to notify the wireless stations which support power saving mode when to wake up to receive multicast frame DTIM is necessary and critical in wireless environment as a mechanism to fulfill power saving synchronization a DTIM interval is a count of the number of beacon frames that must occur before the access point sends the buffered multicast frames For instance if DTIM Interval is set to 3 then the Wi Fi clients will expect to receive a multicast frame after receiving three Beacon frame The higher DTIM interval will help power saving and possibly decrease wireless throughput in multicast applications RTS Threshold TRTS Threshold is in the range of 1 2347 byte The default is 2347 byte The main purpose of enabling RTS
75. crypted during transmission when this option is selected WEP Wired Equivalent Privacy WEP is a data encryption mechanism based on a 64 bit or 128 bit shared key r ns A p Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Key Length o4 bits WEP Auth Method W Open system key Index wer Key 1 WEP Key WEP Key 4 v Key Index Skey index is used to designate the WEP key during data transmission 4 different WEP keys can be entered at the same time but only one is chosen v Key Auth Method Enable the desire option among OPEN or SHARED v WEP Key Enter HEX or ASCII format WEP key value the system supports up to 4 sets of WEP keys 64 bit 10 characters 128 bit 26 characters 13 characters WPA PSK or WPA2 PSK WPA or WPA2 Algorithms allows the system accessing the network by using the WPA PSK protected access WPA General Cipher Suite 465 THF Group Key Update Period soo Master Kew Update Period RERI Key Type asc ue v Cipher Suite By default it is AES Select either AES or TKIP cipher suites v Pre shared Key Enter the pre shared key the format shall go with the selected key type gt Pre shared key can be entered with either a 256 bit secret in 64 HEX digits format or Notice _g to 63 ASCII characters v Group Key Update Period By default it is 3600 seconds This time interval for reke
76. d Enter Password for PPTP connection gt gt gt gt gt Reconnect Mode Always on A connection to Internet is always maintained On Demand A connection to Internet is made as needed z x e sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw IO amp When Time Server is enabled at the On Demand mode the Notice Reconnect Mode will turn out Always on Manual Click the Connect button on WAN Information in the Overview page to connect to the Internet lt Idle Time Time to last before disconnecting PPPoE session when it is idle Enter preferred Idle Time in minutes Default is 0 indicates disabled When Idle time is disabled the Reconnect Mode will turn out Always on lt MTU By default it s 1460 bytes MTU stands for Maximum Transmission Unit Consult with WISP for a correct MTU setting lt MPPE Encryption Microsoft Point to Point Encryption MPPE encrypts data in Point to Point Protocol PPP based dial up connections or Point to Point Tunneling Protocol PPTP virtual private network VPN connections 128 bit key strong and 40 bit key standard MPPE encryption schemes are supported MPPE provides data security for the PPTP connection that is between the VPN client and the VPN server DNS Check No Default DNS Server or Specify DNS Server IP radial button as
77. d from the table In that situation switching packet to that particular MAC address will be dropped Extra Information nem Gridge MACs Information Bridge MACS Information Port MAC Address Ageing Timer LARM MARREEHIHIIHIE YES 0 00 WAN 00 11 334 00 00 0b LAN opc gdieal coec gt Bridge STP Information Select Bridge STP Information on the drop down list to display a list of bridge STP information Extra Information z a oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Bridge STP Information LAN STP is disabled for this interface 10 4 Event Log The Event log displays system events when system is up and running Also it becomes very useful as a troubleshooting tool when issues are experienced in system System Log eee Time Facility Severity Message 1970 01 01 00 00 19 System Infa dnsmasq started version 2 22 cachesize 150 1970 01 01 00 00 15 System Info dns masg cleared cache 1970 01 01 00 00 19 System Info dnsmasq reading fetcresaly conf 1970 01 01 00 00 52 System Info Authentication successful for root from 192 168 2 22 gt Time The date and time when the event occurred gt Facility It helps users to identify source of events such System or User gt Severity Severity level that a specific event is associated such as info error warning etc gt Message Description o
78. e AES or TKIP with your WPA WPA2 encryption method AES is short for Advanced Encryption Standard The AES cipher is specified as a number of repetitions of transformation rounds that convert the input plaintext into the final output of ciphertext Each round consists of several processing steps including one that depends on the encryption key A set of reverse rounds are applied to transform ciphertext back into the original plaintext using the same encryption key TKIP is short for Temporal Key Integrity Protocol TKIP scrambles the keys using a hashing algorithm and by adding an integrity checking feature ensures that the keys haven t been tampered with Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw _ E CERIO lt Group Key Update Period This time interval for re keying GTK broadcast multicast encryption keys in seconds Enter the time length required the default time is 600 seconds lt Master Key Update Period This time interval for re keying GMK master key used internally to generate GTKs in seconds Enter the time length required the default time is 83400 seconds lt Key Type Check on the respected button to enable either ASCII or HEX format for the Pre shared Key lt Pre Shared Key Enter the information for pre shared key the format of the information shall according to the key type selected Pre shared k
79. e PING test 1IP Domain Enter desired domain name i e www google com or IP address of the destination and click ping button to proceed The ping result will be shown in the Result field Count By default it s 5 and the range is from 1 to 50 It indicates number of connectivity test gt Traceroute Allows tracing the hops from the OW 300N2 device to a selected outgoing IP address It should be used for the finding the route taken by ICMP packets across the network to the destination host The test is started using the Start button click Stop button to stopped test Destination Host Specifies the Destination Host for the finding the route taken by ICMP packets across the network MAX Hop Specifies the maximum number of hops max time to live value trace route will probe z a oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CERO 9 4 PoE Bridge CERIO OW 300N2 Design smart PoE Bridge function the PoE Bridge function support provide next AP power Can will be structure become very convenience And the PoE bridge support CERIO WM series AP or OW series to be dual band budle wireless soultion The hardware Install can reference to 1 6 Hardware Installation Steps PoE Bridge Se PuiCe Enable Disable Service The default is Disable the function can Enable or Disable PoE Power 9 5 Reboot This function allows u
80. e if the device is rebooted Default is 300 seconds v Failure Count To Reboot specify the number of ICMP echo response replies If the specified number of ICMP echo response packets is not received continuously the Ping Watchdog Tool will reboot the device Click Save button to save your changes Click Reboot button to activate your changes Without a valid certificate users may encounter the following problem in IE7 when they try to access system s WMI https 192 168 2 254 There will be a Certificate Error because the browser treats system as an illegal website Certificate Error Navigation Blocked Windows Internet Explorer Go E hikkps 1192 168 2 254 File Edit view Favorites Tools Help i Favorites a E Suggested Sites M Free Hotmail El Web Slice Gallery E Certificate Error Navigation Blocked amp There is a problem with this website s security certificate The security certificate presented by this website was not issued by a trusted certificate authority The security certificate presented by this website was issued for a different website s address Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server We recommend that you close this webpage and do not continue to this website Click here to close this webpage Continue to this website not recommended More information Click Continue to this we
81. e transmit from collision because of hidden wireless clients or other causes When collision sources can be removed sooner and other senders attempting to send are listening the channel CSMA CA the owner of the channel should continue ownership and finish their transmission and release the channel Then following ownership of the channel will be sooner for the new pair due to shorter slot time However when long duration of existing collision sources and shorter slot time exist the owners might experience subsequent collisions When adjustment to longer slot time can t improve performance then RTS CTS could supplement and help improve performance ACK Timeout ACK timeout is in the range of 1 372 and set in unit of microsecond The default value is 64 microsecond All data transmission in 802 11b g request an Acknowledgement ACK send by receiving radio The transmitter will resend the original packet if correspondent ACK failed to arrive within specific time interval also refer to as ACK Timeout z x e sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw Cerio Corporation ACK Timeout is adjustable due to the fact that distance between two radio links may vary in different deployment ACK Timeout makes significant influence in performance of long distance radio link If ACK Timeout is set too short transmitter will start to Resend packet befo
82. e with Authentication RADIUS server Support 1 to 64 characters Accounting Server Check on the respected button to enable either Enable or Disable accounting RADIUS server z 5 e Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw ti i a L CetlO Secondary Authentication RADIUS Server lt Authentication Server Enter the IP address of the Authentication RADIUS server lt Port The port number used by Authentication RADIUS server Use the default 1812 or enter port number specified lt Shared secret The secret key for system to communicate with Authentication RADIUS server Support 1 to 64 characters gt VAP MAC Filter Setup In this function the administrator can be allow or reject clients to access Virtual AP Please click on Wireless gt Virtual AP Setup gt MAC Filter Setup click Setup of Virtual AP List and then MAC Filter Setup page appears Follow the below setting Virtual AP Overview WAP List YAP MAC Address E4410 Status Security Type MAC Filter Edit MAC Filter Status YAP Edit VAPO 0011A 0000500 APOO WIPAS PSK Edit Disable Edit YAFI APO1 Disabled Edit Disable Edit YAP APO2 Cff Disabled Edit Disable Edit APOs Disabled Edit Disable Edit APid Cff Disabled Edit Disable Edit APOS Disabled Edit Disable Edit APUG Cff Disabled Edit Disable Edit Disabled Edit Disable Edit MAC Rules
83. el 9 100 gt HT Physical Mode HT Physical Mode THRE Stream 1 o gt Channel Bandvvidth 20 2o 40 Extension Channel o pper Lower MICS Short Gi Disable Enable Aggregation Disable Enable Aggregation Frames Aggregation Size HT TxStream RxStream By default it s 2 Channel Bandwidth The 20 40 MHz option is usually best The other option is available for special circumstances Extension Channel Only for Channel Bandwidth 40 MHz Select the desired channel bonding for control MCS This parameter represents transmission rate By default Auto the fastest possible transmission rate will be selected You have the option of selecting the speed if necessary Shout GI Short Guard Interval by default it s Enable it s can increase throughput However it can also increase error rate in some installations due to increased sensitivity to radio frequency reflections Select the option that works best for your installation Aggregation By default it s Enable To Disable to deactivated Aggregation A part of the 802 11n standard or draft standard It allows sending multiple frames per single access to the medium by combining frames together into one larger frame It creates the larger frame by combining smaller frames with the same physical source and destination end points and traffic class i e QOS into one large frame with a common MAC header
84. er AP MAC Filter Setup Continue Virtual AP Setup section For each Virtual AP setting the administrator can allow or reject clients to access each Virtual AP Repeater AP MAC Filter Setup MAC Rules ede Cisabled r rp MAC Filter List c MAC Address Actions MAC Address Actions Mo items in the list Action Select the desired access control type from the drop down list the options are Disable Allow or Reject v Only Allow List MAC Define certain wireless clients in the list which will have granted access to the Access Point while the access will be denied for all the remaining clients Action Type is set to Only Allow List MAC v Only Deny List MAC Define certain wireless clients in the list which will have denied access to the Access Point while the access will be granted for all the remaining clients Action Type is set to Only Deny List MAC gt Notice MAC Access Control is the weakest security approach WPA or WPA2 Notice security methods should be used when possible There are a maximum of 20 clients allowed in this Enable List The MAC addresses of the wireless clients can be added and removed to the list using the Add and Remove buttons e enemas a e Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw 316 7 System Management 7 1 Configure Management Administrator could specify geographical location
85. er own right of the channel the shorter slot time help manage shorter wait time to re transmit from collision because of hidden wireless clients or other causes When collision sources can be removed sooner and other senders attempting to send are listening the channel CSMA CA the owner of the channel should continue ownership and finish their transmission and release the channel Then following ownership of the channel will be sooner for the new pair due to shorter slot time However when long duration of existing collision sources and shorter slot time exist the owners might experience subsequent collisions When adjustment to longer slot time can t improve performance then RTS CTS could supplement and help improve performance ACK Timeout ACK timeout is in the range of 1 372 and set in unit of microsecond The default value is 64 microsecond All data transmission in 802 11b g request an Acknowledgement ACK send by receiving radio The transmitter will resend the original packet if correspondent ACK failed to arrive within specific time interval also refer to as ACK Timeout ACK Timeout is adjustable due to the fact that distance between two radio links may vary in different deployment ACK Timeout makes significant influence in performance of long distance radio link If ACK Timeout is set too short transmitter will start to Resend packet before ACK is received and throughput become low due to excessively high re trans
86. er the IP address of the Authentication RADIUS server Y Port By default it s 1812 The port number used to communicate with RADIUS server sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw ell ia kk ee CERIO v Shared secret A secret key used between system and RADIUS server Supports 8 to 64 characters Y Session Timeout The Session timeout is in the range of 0 60 seconds The default is Oto disable re authenticate service Amount of time before a client will be required to re authenticate WEP 802 1X When WEP 802 1x Authentication is enabled please refer to the following Dynamic WEP and RADIUS settings to complete configuration Dynamic WEP Settings WEP Key Length 64bits i2spits WEP Key Update Period E4P Reauth Period iiL Authentication RADIUS Server Server IP Port lil Shared Secret Accounting RADIUS Server Enable Disable Secondary Authentication RADIUS Server Server IP Port 15l Shared Secret Authentication Radius Server Settings v IP Address Enter the IP address of the Authentication RADIUS server v Port By default it s 1812 The port number used to communicate with RADIUS server v Shared secret A secret key used between system and RADIUS server Supports 8 to 64 characters Y Session Timeout The Session timeout is in the range of 0 60 seconds The default is O to disable
87. ers sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw en OO CERIO v Session Timeout The Session timeout is in the range of 0 60 seconds The default is Oto disable re authenticate service Amount of time before a client will be required to re authenticate WEP 802 1X When WEP 802 1x Authentication is enabled please refer to the following Dynamic WEP and RADIUS settings to complete configuration Dynamic WEF Settings WEP Key Length s4bits i2sbits WEP Key Update Period EAP Reauth Period EUI Authentication RADIUS Server Server IP Port lil Shared Secret Accounting RADIUS Server Enable Disable secondary Authentication RADIIS Server Server IP eae lol Shared Secret Authentication Radius Server Settings v IP Address Enter the IP address of the Authentication RADIUS server v Port By default it s 1812 The port number used to communicate with RADIUS server v Shared secret A secret key used between system and RADIUS server Supports 8 to 64 characters Y Session Timeout The Session timeout is in the range of 0 60 seconds The default is O to disable re authenticate service Amount of time before a client will be required to re authenticate z x e sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw io 6 12 Repeat
88. erved Support support cerio com tw Cerio Corporation HT TxStream RxStream By default it s 2 Channel Bandwidth The 20 40 MHz option is usually best The other option is available for special circumstances Extension Channel Only for Channel Bandwidth 40 MHz Select the desired channel bonding for control MCS This parameter represents transmission rate By default Auto the fastest possible transmission rate will be selected You have the option of selecting the speed if necessary Shout GI Short Guard Interval by default it s Enable it s can increase throughput However it can also increase error rate in some installations due to increased sensitivity to radio frequency reflections Select the option that works best for your installation Aggregation By default it s Enable To Disable to deactivated Aggregation A part of the 802 11n standard or draft standard It allows sending multiple frames per single access to the medium by combining frames together into one larger frame It creates the larger frame by combining smaller frames with the same physical source and destination end points and traffic class i e QOS into one large frame with a common MAC header Aggregation Frames The Aggregation Frames is in the range of 2 64 default is 32 It determines the number of frames combined on the new larger frame Aggregation Size The Aggregation Size is in the range o
89. etup Static Routing Setup Service Enable Disable Destination Met hlask LD via Oe atewyay interface Protocol Ml ospr pir Save Clear gt Service Click Enable to activated static routing gt Destination Net Mask Specify desired destination IP network address with format of A B C D M gt Via Select a next hop of Gateway or Interface to the destination IP network Gateway Enter gateway IP address Interface Choose the interface via LAN or WAN viar Er ateway Interface Interface Lar Protocol naa d RIF gt Protocol Set static routing rule to RIP or OSPF network Select RIP to associate specific network on RIP routing process Select OSPF to associate specific network with the specified area on OSPF routing process Click Save button to add Routing rule to List There are maximum 20 rules allowed in this List All rules can be edited or removed on the List Click Reboot button to activate your changes e es a 5 Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO 8 8 Time Policy Administrator can define time policy for Service Domain IP Filtering MAC Filtering and Virtual Server There are 10 policy can be defined Please click on Advance gt Time Policy to enter Time Policy Setup page Policy i gt E n E al OU 00 2d 54 Time Schedule List Week Time Actions Tue Ye
90. etwork administrator for the appropriate IP settings Obtain an IP address automatically Use the following IP address IP address 192 168 2 100 Subnet mask 255 255 255 Obtain ONS server address automatically Use the following DNS server addresses Preferred ONS server Po es si Alternate DNS server ara Click OK completion set up IP address Copyright 2015 by Cerio Corporation All rights reserved pees ie ah Sales Mail issal i PLPL o com iw Cerio Corporation Appendix B WEB GUI Valid Characters Table B WEB GUI Valid Characters IP Address IP Format 1 254 IP Netmask 128 0 0 0 255 255 255 252 IP Gateway IP Format 1 254 Primary DNS IP Format 1 254 Secondary DNS IP Format 1 254 Hostname Length 32 0 9 A Z a z IORS AA tsa 5 Manual MAC Address 12 HEX chars IP Address IP Format 1 254 IP Netmask 128 0 0 0 255 255 255 252 IP Gateway IP Format 1 254 Hostname Length 32 0 9 A Z a z 1 S _ lt gt 5 User name Length 32 0 9 A Z a z Password I H _ lt gt MTU 576 1492 for PPPoE 1400 1460 for PPTP Idle Time 0 60 minutes Primary DNS IP Format 1 254 Secondary DNS IP Format 1 254 Hostname Length 32 0 9 A Z a z _ User Name Length 32 0 9 A Z a z Password G _ lt gt
91. ey Length The key size of WEP encryption can be 64bit 128bit or 152bit lt WEP auth method You can select the appropriate value Open system lf enabling this mode there is no need authentication to access AP or Wireless NIC or Shared Only those who are sharing the same key with the AP can connect with it lt Key Index You can select the Key which you want to use Other wireless station must have the same key value to connect with OW 300N2 4 different WEP keys can be configured at the same time but only one is used Effective key is set with a choice of WEP Key 1 2 3 or 4 lt WEP Key You can chose either HEX or ASCII for your WEP key value for 64bit encryption strength can use 10 digits for HEX O 9 a f and A F or 5 digits for ASCII 0 9 a z and A Z for 128bit encryption strength can use 26 digits for HEX 0 9 a f and A F or 13 digits for ASCII O 9 a z and A Z for 152bit encryption strength can use 32 digits for HEX O 9 a f and A F or 16 digits for ASCII O 9 a z and A Z WPA PSK or WPA2 PSK WPA PSK is short for W Fi Protected Access Pre Shared Key WPA SPK uses the same encryption way with WPA and the only difference between them is that WPA PSK recreates a simple shared key instead of using the user s certification WPA General Cipher Suite AEs Group key Update Period 600 Master Key Update Period Rimini Key Type asco Hex MEURA CEM OUSermnanual lt Cipher Suite You can chose us
92. ey can be either entered as a 256 bit secret in 64 HEX digits format or 8 to 63 ASCII characters v WPA Enterprise or WPA2 Enterprise General Setting The RADIUS authentication and encryption will be both enabled if this selected WPA General Cipher Suite aes Group Key Update Period Master Key Update Period Bin EAP Reauth Period LIIN Authentication RADIUS Server Server IP Port Sie Shared Secret Accounting RADIUS Server Enable Disable Secondary Authentication RADIUS Server Server IP Port 1il Shared Secret General Setting lt Cipher Suite You can chose use AES or TKIP with your WPA WPA2 encryption method AES is short for Advanced Encryption Standard The AES cipher is specified as a number of repetitions of transformation rounds that convert the input plaintext into the final output of ciphertext Each round consists of several processing steps including one that depends on the encryption key A set of reverse rounds are applied to transform ciphertext back into the original plaintext using the same encryption key z a oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw TKIP is short for Temporal Key Integrity Protocol TKIP scrambles the keys using a hashing algorithm and by adding an integrity checking feature ensures that the keys haven t been tampered with lt Group Key Update Period This t
93. f 1024 65535 default is 50000 It determines the size in Bytes of the larger frame Change these settings as described here and click Save button to save your changes Click Reboot button to activate your changes The items in this page is for AP s RF general settings and will be applied to all VAPs and WDS Link 3 5 Configure Wireless Advanced Setup The administrator can change the Slot Time ACK Timeout RTS threshold and fragmentation threshold settings for the system Please click on Wireless gt Advanced Setup and follow the below setting Sales Mail issales cerio com tw Support sul cerio com tw Copyright 2015 by Cerio Corpor ri JODO cE Wireless Setur Advanced Setup slot Time ao o Distance ACK Timeout Beacon Interval TIM Interval RTS Threshlod PEC short Preamble 0 Enable d i IGMP Snooping Enable Ooi Greenfield Enable 5 Wiha Enable 5 Slot Time Slot time is in the range of 9 1489 and set in unit of microsecond The default value is 9 microsecond Slot time is the amount of time a device waits after a collision before retransmitting a packet Reducing the slot time decreases the overall back off which increases throughput Back off which is a multiple of the slot time is the random length of time a station waits before sending a packet on the LAN For a sender and receiver own right of the channel the shorter slot time help manage shorter wait time to r
94. f the event V Click Refresh button to renew the log gt Click Clear button to clear all the record l Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Cerio Corporation Appendix A Windows TCP IP Settings gt Windows XP Click Start gt Settings gt Control Panel and then Control Panel window appears Click on Network Connections and then Network Connections window appears Metwork Connections Fie Edit View Favorites Tools Advanced Help ar Q ax i at pO search Folders fF Address S Network Connections Be LAN or High Speed Internet i Wireless Network Connection Disabled Firevalled L ta Atheros GRSOO6ES Wireless M Network Tasks Local Area Connection Connected Firewalled Loa NVIDIA nForce Networking Co aa Create a new connection 9 Set up a home or small office network Change Windows Firewall settings See Also ae Network Troubleshooter Click right on Local Area Connection and select Properties Network Connections File Edit wiew Favorites Tools Advanced Help ar Q a hi wi DO Search Folders Fa Address Network Connections a ud E LAN or High Speed Internet Network Tasks ocal Area Connection i Wireless Network Connection Connected Firewalled Disabled Firewalled n a Hd Beemer lent Create
95. fferent deployment ACK Timeout makes significant influence in performance of long distance radio link If ACK Timeout is set too short transmitter will start to Resend packet before ACK is received and throughput become low due to excessively high re transmission ACK Timeout is best determined by distance between the radios data rate of average environment The Timeout value is calculated based on round trip time of packet with a little tolerance So if experiencing re transmissions or poor performance the ACK Timeout could be made longer to accommodate gt Slot Time and ACK Timeout settings are for long distance links It is important Notice to tweak settings to achieve the optimal result based on requirement Beacon Interval Beacon Interval is in the range of 40 3500 and set in unit of millisecond The default value is 100 msec Access Point AP in IEEE 802 11 will send out a special approximated 50 byte frame called Beacon Beacon is broadcast to all the stations provides the basic information of AP such as SSID channel encryption keys signal strength time stamp support data rate All the radio stations received beacon recognizes the existence of such AP and may proceed next actions if the information from AP matches the requirement Beacon is sent on a periodic basis the time interval can be adjusted By increasing the beacon interval you can reduce the number of beacons and associated overhead but that will
96. for connection Please double check the gt Notice Channel setting of Wireless General Setup page on OW 300N2 as it must be the same with associated AP channel setting If you only click Connect button and does not click Save button The selected Notice profile would not be saved on the Profile List Change these settings as described here and click Save button to save your changes Click Reboot button to activate your changes 4 8 Remote AP Status Show the remote bridge AP whether is link or unlinked Refresh Remote AP Status apy B MAC Address Signal Moise dbm RSSI Signal Quality 2 TXFRX Rate Status default ori 0 ees Ohl fob 4 9 Repeater AP Setup The network manager can configure related wireless settings AP Setup Security Settings and Access Control Settings Administrators can configure ESSID SSID broadcasting Maximum number of client associations security type settings and MAC Filter settings Sales Mail issal cerio Aw Copyright 2015 by Cerio Corporation All rights reserved S daa ataia conden ETO Repeater AP Setur Security eB Repeater 4P Enable Repeater AP Enable Disable Hidden 551D Enable Disable Client Isolation Enable Disable L4PP Enable Disable Maximum Clients Security Type ESSID Extended Service Set ID When clients are browsing for available wireless networks this is the SSID that will appear in the li
97. for how to setup the local IP Address and Netmask Please click on System gt LAN and follow the below setting LAN Setur IP Setup IF Address 192 100 2 254 Eee 25 295 2595 0 SIPEG spanning Tree S ErwiCE Enable o Disable gt LAN IP Setup The administrator can manually setup the LAN IP address IP Address The IP address of the LAN port default IP address is 192 168 2 254 IP Netmask The Subnet mask of the LAN port default Netmask is 255 255 255 0 z 5 e Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw ETO gt 802 1d Spanning Tree The spanning tree network protocol provides a loop free topology for a bridged LAN between LAN interface and 8 WDS interfaces from wds0 to wds7 The Spanning Tree Protocol which is also referred to as STP is defined in the IEEE Standard 802 1d ee E Remote Base Station 192 1BG 2 4 L se ii m i Won dii LOOP t Blocked by Spanning 4 14 Tree Protocol 4 i w aa koan i ae 192 168 2 i 192 168 272 251 192 166 2 255 Hase Station Remote Base Station ae gt DHCP Setup Devices connected to the system can obtain an IP address automatically when this service is enabled DHCP Server Service Enable Disable End IP Default Gateway DMS 1 IP 192 166 2 254 DNS IP wins 17 i Domain Lease Time Beil DHCP Check En
98. ges 8 2 IP Filter Allows to create deny or allow rules to filter ingress or egress packets from specific source and or to destination IP address on wired LAN or Wireless WAN ports Filter rules could be used to filter unicast or multicast packets on different protocols as shown in the IP Filter Setup Important to note that IP filter rules has precedence over Virtual server rules IP Filter Setup IP Rules source Address Mask Source Port Destination Address Mask Destination Port Infout Or 6 out Protocol ALL cr uoce icr Listen _ Yes ONE Policy Deny 6 Pass Interface Seen Sivas RUM i sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Cerio Corporation gt Source Address Mask Enter desired source IP address and netmask i e 192 168 2 10 32 Source Port Enter a port or a range of ports as start end i e port 20 80 v v Destination Address Mask Enter desired destination IP address and netmask e 192 168 1 10 32 Destination Port Enter a port or a range of ports as start end i e port 20 80 In Out Applies to Ingress or egress packets Protocol Supports TCP UDP or ICMP Listen Click Yes radial button to match TCP packets only with the SYN flag Policy Deny to drop and Pass to allow per filter rules Interface The interface that a filter rule applies VV VV VV WV Schedule Can choose to
99. goresenasseanse 110 6 11 Repeater AP SOE DP iisscicecicisdicsiccccnessssccuesereseescunpiavetanadansessancvectotecesannhanctaretavdesdaacuesbostereoanpianes 110 6 12 Repeater AP MAC Filter Setup cccessssecseseseessssssssssseeeeeeseeseeees 115 7 System Management vicesissicessessceceisvanzecavetsecedesssveesnssdsacnavancedecenabaaecssevseosecacsevers 116 7 1 Configure Management eeeeeeeeeerrressesrrrrrrrsssserrrerrrssssrrretrrrssssrrrreeresssserrreressserrer 116 7 2 Configure System TiMe eeeeeeeeeeerressssrrrrrrrrssserrrrrrrssssrrreererssssrrrreersssssrrrreressserrer 119 7 3 Configure UPnP SetupP eeeeesesrrrrrsssssrrrrrrrsssssrrrerrrssssrrreererssssrrrreerssssserrreressssreens 120 7 4 Config re SNMP SetUP e tae Nee tee Bertie sent a EEEE EEEN 120 8 Configure Advance Setup ssssceceeesssssoccecceceessssosccccceeeessssooocceceeseesessssoscceeee 122 8 1 DMZ E A A E 122 8 2 P Sree cates E E A evenio see eanietonieniee 123 8 3 MAC FIGI oore EE E EEE 125 8 4 Virtual OY OU de E Ra A aE aa iea 126 8 5 Parental COntTOl sis senovasraasceasarasonoassosesosdeanca snare saaacaancasasioiacoeseoneussavenusacesanassnvoscoustonstahs 127 8 6 QOS tesserae see see tess canes aac gs E cane anuig sue Sea tone ton E ees eatoneeao coeds 129 8 7 IP TR UU ho assess A esaceassaqsenssansscusssaacsaaeetaacesssasbessonancars 131 Copyright 2015 by Cerio Corporation All rights reserved Saria anaa ain a oo __ ee Cerio Corporatio
100. he random length of time a station waits before sending a packet on the LAN For a sender and receiver own right of the channel the shorter slot time help manage shorter wait time to re transmit from collision because of hidden wireless clients or other causes When collision sources can be removed sooner and other senders attempting to send are listening the channel CSMA CA the owner of the channel should continue ownership and finish their transmission and release the channel Then following ownership of the channel will be sooner for the new pair due to shorter slot time However when long duration of existing collision sources and shorter slot time exist the owners might experience subsequent collisions When adjustment to longer slot time can t improve performance then RTS CTS could supplement and help improve performance ACK Timeout ACK timeout is in the range of 1 372 and set in unit of microsecond The default value is 64 microsecond All data transmission in 802 11b g request an Acknowledgement ACK send by receiving radio The transmitter will resend the original packet if correspondent ACK failed to arrive within specific time interval also refer to as ACK Timeout z a oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw Cerio Corporation ACK Timeout is adjustable due to the fact that distance between two radio links may vary in di
101. hm that determines the initial random backoff wait time window for retry of a transmission The value specified here in the Minimum Contention Window is the upper limit in milliseconds of a range from which the initial random backoff wait time is determined z x e sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw Cerio Corporation v CWmax Maximum Contention Window The value specified here in the Maximum Contention Window is the upper limit in milliseconds for the doubling of the random backoff value This doubling continues until either the data frame is sent or the Maximum Contention Window size is reached Once the Maximum Contention Window size is reached retries will continue until a maximum number of retries allowed is reached Valid values for the cwmax are 1 3 7 15 31 63 127 255 511 or 1024 The value for cwmax must be higher than the value for cwmin o v AIFS The Arbitration Inter Frame Spacing Number specifies a wait time in milliseconds for data frames v TxOP Limit Transmission Opportunity is an interval of time when a WME AP has the right to initiate transmissions onto the wireless medium WM This value specifies in milliseconds the Transmission Opportunity TXOP for AP that is the interval of time when the WMM AP has the right to initiate transmissions on the wireless network v ACM bit Admission
102. hput Back off which is a multiple of the slot time is the random length of time a station waits before sending a packet on the LAN For a sender and receiver own right of the channel the shorter slot time help manage shorter wait time to re transmit from collision because of hidden wireless clients or other causes When collision sources can be removed sooner and other senders attempting to send are listening the channel CSMA CA the owner of the channel should continue ownership and finish their transmission and release the channel Then following ownership of the channel will be sooner for the new pair due to shorter slot time However when long duration of existing collision sources and shorter slot time exist the owners might experience subsequent collisions When adjustment to longer slot time can t improve performance then RTS CTS could supplement and help improve performance z x e sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw Cerio Corporation gt ACK Timeout ACK timeout is in the range of 1 372 and set in unit of microsecond The default value is 64 microsecond All data transmission in 802 11b g request an Acknowledgement ACK send by receiving radio The transmitter will resend the original packet if correspondent ACK failed to arrive within specific time interval also refer to as ACK Timeout ACK Timeout is adjustable due to
103. icator If LED s whole bright indicate signal is the strong The function only support Client Bridge and WISP modes Sales Mail issales cerio com LY Ge Signal LED Thresholds LED Indicator Thresholds ASSI v LED Indicator Total of three LED s the LED1 RSSI number is Minimum WMM QoS This affects traffic flowing from the access point to the client station Configuring QoS options consists of setting parameters on existing queues for different types of wireless traffic You can configure different minimum and maximum wait times for the transmission of packets in each queue based on the requirements of the media being sent Queues automatically provide minimum transmission delay for Voice Video multimedia and mission critical applications and rely on best effort parameters for traditional IP data As an Example time sensitive Voice amp Video and multimedia are given effectively higher priority for transmission lower wait times for channel access while other applications and traditional IP data which are less time sensitive but often more data intensive are expected to tolerate longer wait times WMM Qos Wibi Parmameters of Access Point ACH bit Mo ACK Policy bit AC Type CW min CV max AIFS AC BE O Ac BRI T E p d 3008 d AC YVO 1504 a wibi Parmameters of Station ACK bit Mo ACK Policy bit AC Type CV max AIFS TxOp Limit fo 10 jo 3008 asoa AC BE O
104. il issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw WPA General Cipher Suite aes Group key Update Period m o o Master kew Update Period EAP Reauth Period Suthentication RADIUS Server Server IP mee tol Shared Secret Accounting RADIUS Server Enable Disable Secondary Authentication RADIUS Server Server IP Port 1il Shared Secret WPA General Settings v Cipher Suite By default it is AES Select either AES or TKIP cipher suites v Group Key Update Period By default its 3600 seconds This time interval for Oy Notice rekeying GIK broadcast multicast encryption keys in seconds Entering the time length is required PMK Cache Period By default it s 10 minutes Set WPA2 PMKID cache timeout period after time out the cached key will be deleted Pre Authentication By default it s Disable To Enable is use to speed up roaming before pre authenticating IEEE 802 1X EAP part of the full RSN authentication and key handshake before actually associating with a new AP PMK Cache Period and Pre Authentication is used in WPA2 Enterprise Authentication Radius Server Settings v v IP Address Enter the IP address of the Authentication RADIUS server Port By default its 1812 The port number used to communicate with RADIUS server Shared secret A secret key used between system and RADIUS server Supports 8 to 64 charact
105. ime interval for re keying GTK broadcast multicast encryption keys in seconds Enter the time length required the default time is 600 seconds lt Master Key Update Period This time interval for re keying GMK master key used internally to generate GTKs in seconds Enter the time length required the default time is 83400 seconds lt EAP Reauth Period This time interval for re authentication in seconds Enter the time length required the default time is 3600 seconds 0 disable re authentication Authentication RADIUS Server Settings Authentication RADIUS Server Port Shared Secret iA Accounting RADIUS Server Enable Disable lt Authentication Server Enter the IP address of the Authentication RADIUS server lt Port The port number used by Authentication RADIUS server Use the default 1812 or enter port number specified lt Shared secret The secret key for system to communicate with Authentication RADIUS server Support 1 to 64 characters lt Accounting Server Check on the respected button to enable either Enable or Disable accounting RADIUS server Secondary Authentication RADIUS Server Secondary Authentication RADIUS Server Server 1 Port Bia lt Authentication Server Enter the IP address of the Authentication RADIUS server lt Port The port number used by Authentication RADIUS server Use the default 1812 or enter port number specified n Sales Mail issales cerio com tw
106. ing Setup Wizard 2 setup Wizard The setup wizard will guide you to configure access point for first time Please follow the setup wizard step by step In this mode the device can be used to Access Point for wireless clients connection the all ethernet ports and wireless interface are bridged together Mest LAN setup gt Here are the instructions for setup your OW 300N2 local LAN IP address and netmask If you don t want change the default OW 300N2 IP 192 168 2 254 address please keep the default and go next setup sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CezlO Setup Wizard LAN Setup This page is used to configure the parameters for local area network which connects to the LAN port of your Access Point Here you may change the setting for IF Address Netmask ete Mode Static IP Dynamic IP IP Metmaski IP Gateway Cancel Back Mert 3 DNS gt If you don t know for your ISP correct DNS IP address Please click No default DNS server to follow your ISP DNS related IP address Setup Wizard DNS This page allows you assign DNS Server IP address ONS No Default DNS Server Specify DNS Server IP Primary DNS Secondary ONS Cancel Back Mext 4 Wireless Setup gt If you are not sure which setting to choose Please then the default setting to best WiFi smart channel judgment for auto
107. ions helping WISPs deliver wireless broadband Internet service to new residential and business customers In this mode OW 300N2 is enabled with DHCP Server functions The wired clients of OW 300N2 are in the same subnet from Main Base Station and it accepts wireless connections from client devices When the OW 300N2 configured as an Access Point and Client Station simultaneously the Wireless General and Advanced Setup also used simultaneously But the Security Type can be different In the other word the channel or other settings will be the same between OW 300N2 to Main Base Station and wireless client to OW 300N2 but security type can be different Oy Notice 4 3 Configure OW 300N2 LAN IP Address Here are the instructions for how to setup the local IP Address and Netmask Please click on System gt LAN and follow the below setting LAN Setup Ethernet Connection Type Mode Static IP Oynamic IF Static IP IP Metmask IP Gateway Ri Dh No Default DNS Server Specify ONS Server IP Primary OMS secondary DMS B z Ld Spanning Tree Service L Enable Disable sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw ETO gt LAN IP Setup The administrator can manually setup the LAN IP address IP Address The IP address of the LAN port default IP address is 192 168 2 254 IP Netmask The Subnet mask of the LAN port
108. isable Edit YAPI APOI Disabled Edit Disable Edit VARS APD Off Disabled Edit Disable Edit APOS Disabled Edit Disable Edit APO 4 Off Disabled Edit Disable Edit APOS Disabled Edit Disable Edit APO Off Disabled Edit Disable Edit APOT Disabled Edit Disable Edit z x e sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw MAC Rules Amd Cisabled ka Save Action Select the desired access control type from the drop down list the options are Disable Allow or Reject v Only Allow List MAC Define certain wireless clients in the list which will have granted access to the Access Point while the access will be denied for all the remaining clients Action Type is set to Only Allow List MAC v Only Deny List MAC Define certain wireless clients in the list which will have denied access to the Access Point while the access will be granted for all the remaining clients Action Type is set to Only Deny List MAC gt MAC Access Control is the weakest security approach WPA or WPA2 security Notice methods should be used when possible 5 9 WDS Setup Expand your Wireless Network WS Setup Service L Enable Disable WDS Peers MAC Address Description Service By default it s Disable To Enable to activate WDS Enable Click Enable checkbox to create WDS link WDS Peer s MAC Address Enter the MAC address of WDS peer Descriptio
109. issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support suppor aaa enone Cerio Corporation In Local Area Connection Properties window select Internet Protocol TCP IP and click on Properties button Local Area Connection Properties General Advanced Connect using eee nee T This connection uses the following items W Microsoft TCRIP version 6 e L Frotocol LE ee led vs 7 5 0 Description Transmission Control Protocaol nternet Protocol The default Wide area network protocol that provides communication across diverse interconnected networks Show icon in notification area when connected Notify me when this connection has limited or no connectyity Select Use the following IP address and type in Internet Protocol TCP IP Properties General You can get IF settings assigned automatically if your network supports this capability Otherwise you need to ask pour network administrator for the appropriate IF settings F Obtain an IF address automatically Use the following IP address IP address 192 168 2 22 Subnet mask PID raaa Al Default gateway fs se se Ubtain ONS server address automatically Use the following DNS server addresses Preferred OMS server Po Alternate DNS server oe C Sales Mall issales eer tw Copyright 2015 by Cerio Corporation
110. it Preamble Synchronization field The preamble is used to signal here is a train of data coming to the receiver The short preamble provides 72 bit Synchronization field to improve WLAN transmission efficiency with less overhead IGMP Snooping the process of listening to Internet Group Management Protocol IGMP network traffic The feature allows a network switch to listen in on the IGMP conversation between hosts and routers By listening to these conversations the switch maintains a map of which links need which IP multicast streams Multicasts may be filtered from the links which do not need them and thus controls which ports receive specific multicast traffic Greenfield In wireless WLAN technology greenfield mode is a feature of major components of the 802 11n specification The greenfield mode feature is designed to improve efficiency by eliminating support for 802 11b g devices in an all draft n network In greenfield mode the network can be set to ignore all earlier standards WMM QoS This affects traffic flowing from the access point to the client station Configuring QoS options consists of setting parameters on existing queues for different types of wireless traffic You can configure different minimum and maximum wait times for the transmission of packets in each queue based on the requirements of the media being sent Queues automatically provide minimum transmission delay for Voice Video multimedia and mission critic
111. k Reboot button to activate your changes 5 4 Configure OW 300N2 LAN IP Address Here are the instructions for how to setup the local IP Address and Netmask Please click on System gt LAN and follow the below setting LAN Setup IP Setup IF Address 192 160 2 254 IP Netmask eee 804 ld Spanning Tree SEVICE Enable Disable gt LAN IP Setup The administrator can manually setup the LAN IP address IP Address The IP address of the LAN port default IP address is 192 168 2 254 sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw 1O IP Netmask The Subnet mask of the LAN port default Netmask is 255 255 255 0 gt 802 1d Spanning Tree The spanning tree network protocol provides a loop free topology for a bridged LAN between LAN interface and 8 WDS interfaces from wds0 to wds7 The Spanning Tree Protocol which is also referred to as STP is defined in the IEEE Standard 802 1d a re Remote Base Station K 192 168 25 Trea gap SA a e i 92 1 Bie 250 LOOP ty Blocked by Spanning A SOOK2 192 160 2254 Tree Protocol l eel i K 192 168 2 192 168 2253 i 192 br 2 i a rf Base Station Remote Base Station dmh dmb gt DHCP Setup Devices connected to the system can obtain an IP address automatically when this service is enabled DHEF Server Service o Enable Disable etme 192 160 2 10 dR 192 160 2 70
112. key value the system supports up to 4 sets of WEP keys 64 bit 10 Characters 5 Characters 128 bit 26 Characters 13 Characters WPA PSK or WPA2 PSK WPA or WPA2 Algorithms allows the system accessing the network by using the WPA PSK protected access Security Type Cipher Suite Pre shared key ee v Cipher Suite Select the desired cipher suite from the drop down list the options are AES and TKIP v Pre shared Key Enter the information for pre shared key the key can be either entered as a 256 bit secret in 64 HEX digits format or 8 to 63 ASCII characters gt Profile List The user can manage the created profiles for home work or public areas Below depict an example for Profile List Profile List Active Profile Name ma Be MAC Address Security Type Actions 1 AP_Profiled default MOME Delete connect Click Edit an exist profile on the Profile List The field of System Configuration and Security Policy will display profile s content Edit profile s content and then click Save button to save the profile Click Delete to remove profile e enemas a e Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Cerio Corporation Click and Select a profile from list then click the Connect button to connecting to the wireless network with the profile setting Before you click Connect button
113. l issales cerio com tw 5 Up sort f iari DE G r VT Copyright 2015 by Cerio Corporation All rights reserved uppo D Virtual AP Overview VAP List YAP MAC Address E Status Security Type MAC Filter Edit MAC Filter Status YAP Edit WAPO Ob1DASOnOnoOC APOO VAP 2 PSE Edit Disable Edit YAP1 APOI Off Disabled Edit Disable Edit VWAP2 APO Off Disabled Edit Disable Edit APU3 Disabled Edit Disable Edit APO4 Off Disabled Edit Disable Edit APOS Disabled Edit Disable Edit APUG Ott Disabled Edit Disable Edit APO Disabled Edit Disable Edit VAP Display number of system s Virtual AP MAC Address The MAC address of the VAP Interface is displayed here When you enable AP and reboot system the MAC address will display here ESSID Display Virtual AP s ESSID default is APOO APO7 Status Display VAP status default VAPO is always on and only VAPO can support WPS function Security Type Display Virtual AP s Security Type default is disabled MAC Filter Setup Click Setup button for configuring Virtual AP s Access Control List VAP Edit Click Edit button for configuring Virtual AP s settings and security type Change these settings as described here and click Save button to save your changes Click Reboot button to activate your changes 5 8 Virtual AP General Configuration For each Virtual AP administrators can configure general settings and security type Click Wireless gt Virtual A
114. less clients 3 3 Configure OW 300N2 LAN IP Address Here are the instructions to setup the local IP Address and Netmask Please click on System gt LAN and follow the below setting LAN Setup Ethernet Connection Type Mode Static IP Oynamic IP Static IP eevee 192 100 2 254 IF Metmiask ea IP Gatewa yi sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw DMS Mo Default DMS Server Specify DNS Server IP 604 ld Spanning Tree SERVICE Enable Disable gt Ethernet Connection Type Check either Static IP or Dynamic IP button as desired to set up the system IP of LAN port Ethernet Connection Type Mode Static IP Dynamic IP Static IP The administrator can manually setup the LAN IP address when static IP is available preferred Static IP IF Address 192 160 2 254 HE GAUE ELH 20 29 5 295 0 IP Gateway v IP Address The IP address of the LAN port default IP address is 192 168 2 254 v IP Netmask The Subnet mask of the LAN port default Netmask is 255 255 255 0 v IP Gateway The default gateway of the LAN port Dynamic IP This configuration type is applicable when the OW 300NZ2 is connected to a network with the presence of a DHCP server all related IP information will be provided by the DHCP server automatically LAN Setup Ethernet Connection Type Mode Static IP Dyn
115. ll incur additional overhead and throughput will go down DTIM Interval The DTIM interval is in the range of 1 255 The default is 1 DTIM is defined as Delivery Traffic Indication Message It is used to notify the wireless stations which support power saving mode when to wake up to receive multicast frame DTIM is necessary and critical in wireless environment as a mechanism to fulfill power saving synchronization A DTIM interval is a count of the number of beacon frames that must occur before the access point sends the buffered multicast frames For instance if DTIM Interval is set to Sales Mail issales cerio com tw 5 Up sort f iari DE G r VT Copyright 2015 by Cerio Corporation All rights reserved uppo D Cerio Corporation 3 then the Wi Fi clients will expect to receive a multicast frame after receiving three Beacon frame The higher DTIM interval will help power saving and possibly decrease wireless throughput in multicast applications RTS Threshold TRIS Threshold is in the range of 1 2347 byte The default is 2347 byte The main purpose of enabling RTS by changing RTS threshold is to reduce possible collisions due to hidden wireless clients RTS in AP will be enabled automatically if the packet size is larger than the Threshold value By default RTS is disabled in a normal environment supports non jumbo frames Short Preamble By default it s Enable To Disable is to use Long 128 b
116. loss during firmware upgrade please back up current settings gt before proceeding Notice 2 Do not interrupt during firmware upgrade including power on off as this may damage system gt Firmware Information Show currently the OW 300N2 of system software version and software date Firmware Upgrade Firmware Information Firmware version Cen CPE W2H104 1 0 0 BETS Firmware Date 2012 12 21 14 22 56 From time to ti me the product may release new versians of the systems firmuvare You can download up to date firmware to upgrade system gt Upgrade firmware The upgrade firmware will support via local PC and TFTP Server and HTTP URL to upgrade system z a oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw Wograde Via Local PC Upgrade Via TFIP Server TFTP Server IP Upgrade Via HTTP URL ORL Upgrade 9 3 Network Utility The administrator can diagnose network connectivity via the PING or TRACEROUTE utility Please click on Utilities gt Network Utility and follow the below setting EIE Traceroute Destination Host a lax Hops start stop gt Ping This utility will help ping other devices on the network to verify connectivity Ping utility using ICMP packets detects connectivity and latency between two network nodes As result of that packet loss and latency time are available in the Result field while running th
117. lso with included PoE power and data are supplied to the unit using CAT5 Ethernet cable Furthermore the OW 300N2 have support PoE power supply function and Support PoE Bridge Can provide PoE Power to the next OW 300N2 PoE unit CERIO OW 300N2 1000mW eXtreme Power 11N Outdoor Access Point supports seven operational modes the Router AP mode Router AP WDS mode and Pure AP mode AP WDS mode and the Pure WDS mode and the Client Bridge Repeater AP Mode and WISP Repeater AP mode respectively with built in remote management features simplify the deployment and reduce cost for continued maintenance of the outdoor bridge And the CERIO OW 300N Support QoS mechanism by 1 2 Package Content OW 300N2 Main Unit x1 Power Adapter Power Supply x1 PoE Injector x1 Wall Pole Mounting Bracket x1 CD Manual x1 Warranty Card x1 5 7 E a UDEG i Copyright 2015 by Cerio Corporation All ri issales cerio com tw upportgcerio com tw Cerio Corporation 1 3 Applications in Wireless Network Smart of PoE Bridge application CERIO OW 300N2 1000mW eXtreme Power 11N Outdoor Access Point supports Design smart PoE Bridge function the PoE Bridge function support provide next AP power Can will be structure become very convenience And the PoE bridge support CERIO WM series AP or OW series to be dual band budle wireless soultion CERIO OW 300N2 1000mW eXtreme Power 11N Outdoor Access Point supports High Power Outdoor AP Bridge s
118. ly provide minimum transmission delay for Voice Video multimedia and mission critical applications and rely on best effort parameters for traditional IP data Sales Mail issal sales cerio com tw upport cerio com tw Copyright 2015 by Cerio Corporation All rights reserved i CEFO As an Example time sensitive Voice amp Video and multimedia are given effectively higher priority for transmission lower wait times for channel access while other applications and traditional IP data which are less time sensitive but often more data intensive are expected to tolerate longer wait times WW hl hl s D S Lai hl hl Fa rmame te ra oft 5 CCeS5 F o i HI t AC Type CW min CV max AIFS ACK bit Mo ACK Policy bit AC BE O d Ac BK L d 3008 A d i504 H z AC YO 3 Wikibd Parmameters of Station AC Type CY max AIFS ACK bit Mo ACK Policy bit 4c BE O AC BEL AC Vis o j a T v AC Type AC_BK Background Low High throughput Bulk data that requires maximum throughput and is not time sensitive is sent to this queue FTP data for example AC_BE Best Effort Medium Medium throughput and delay Most traditional IP Ae a a AC VI Video High Minimum delay Time sensitive video data is el ae ie AC_VO Voice High Time sensitive data like VoIP and streaming m ec Nine v CWmin Minimum Contention Window This parameter is input to the algorit
119. m tw Copyright 2015 by Cerio Corpor ri JODO Short Preamble By default it s Enable To Disable is to use Long 128 bit Preamble Synchronization field The preamble is used to signal here is a train of data coming to the receiver The short preamble provides 72 bit Synchronization field to improve WLAN transmission efficiency with less overhead IGMP Snooping the process of listening to Internet Group Management Protocol IGMP network traffic The feature allows a network switch to listen in on the IGMP conversation between hosts and routers By listening to these conversations the switch maintains a map of which links need which IP multicast streams Multicasts may be filtered from the links which do not need them and thus controls which ports receive specific multicast traffic Greenfield In wireless WLAN technology greenfield mode is a feature of major components of the 802 11n specification The greenfield mode feature is designed to improve efficiency by eliminating support for 802 11b g devices in an all draft n network In greenfield mode the network can be set to ignore all earlier standards Signal LED Thresholds This function can setting RSSI number 1 99 to control signals LED s The OW 300N2 system will calculate for RSSI number and total of three LED s indicator If LED s whole bright indicate signal is the strong The function only support Client Bridge Repeater AP and WISP Repeater N
120. mask is 255 255 255 0 DNS1 IP Enter IP address of the first DNS server this field is required DNS2 IP Enter IP address of the second DNS server this is optional WINS IP Enter IP address of the Windows Internet Name Service WINS server this is optional Domain Enter the domain name for this network Lease Time The IP addresses given out by the DHCP server will only be valid for the duration specified by the lease time Increasing the time ensure client operation without interruptions but could introduce potential conflicts Lowering the lease time will avoid potential address conflicts but might cause more interruptions to the client while it will acquire new IP addresses from the DHCP server Default is 86400 seconds Click Save button to save your changes Click Reboot button to activate your changes 4 4 Wireless General Setup The administrator can change the data transmission channel and output power settings for the system Please click on Wireless gt General Setup and follow the below setting Wireless Setup General Setup MAC Address OO Tbasso0 0o0 0r Band Mode SRA arie ry t Country gee wyt Tx Power MAC Address The MAC address of the Wireless interface is displayed here Band Mode Select an appropriate wireless band bands available are 801 11 b g n mixed Country a region the OW 300N2 support region for US ETSI and Japan TX Power You can adjust the output power of the system to
121. mbo frames Short Preamble By default its Enable To Disable is to use Long 128 bit Preamble Synchronization field The preamble is used to signal here is a train of data coming to the receiver The short preamble provides 72 bit Synchronization field to improve WLAN transmission efficiency with less overhead IGMP Snooping the process of listening to Internet Group Management Protocol IGMP network traffic The feature allows a network switch to listen in on the IGMP conversation between hosts and routers By listening to these conversations the switch maintains a map of which links need which IP multicast streams Multicasts may be filtered from the links which do not need them and thus controls which ports receive specific multicast traffic Greenfield In wireless WLAN technology greenfield mode is a feature of major components of the 802 11n specification The greenfield mode feature is designed to improve efficiency by eliminating support for 802 11b g devices in an all draft n network In greenfield mode the network can be set to ignore all earlier standards WMM QoS This affects traffic flowing from the access point to the client station Configuring QoS options consists of setting parameters on existing queues for different types of wireless traffic You can configure different minimum and maximum wait times for the transmission of packets in each queue based on the requirements of the media being sent Queues automatical
122. mission ACK Timeout is best determined by distance between the radios data rate of average environment The Timeout value is calculated based on round trip time of packet with a little tolerance So if experiencing re transmissions or poor performance the ACK Timeout could be made longer to accommodate gt Slot Time and ACK Timeout settings are for long distance links It is important to Notice tweak settings to achieve the optimal result based on requirement Sales Mail issal sales cerio com tw upport cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Cerio Corporation Beacon Interval Beacon Interval is in the range of 40 3500 and set in unit of millisecond The default value is 100 msec Access Point AP in IEEE 802 11 will send out a special approximated 50 byte frame called Beacon Beacon is broadcast to all the stations provides the basic information of AP such as SSID channel encryption keys signal strength time stamp support data rate All the radio stations received beacon recognizes the existence of such AP and may proceed next actions if the information from AP matches the requirement Beacon is sent on a periodic basis the time interval can be adjusted By increasing the beacon interval you can reduce the number of beacons and associated overhead but that will likely delay the association and roaming process because stations scanning for available access
123. n 8 8 9 1 9 2 9 3 9 4 9 5 10 10 1 10 2 10 3 10 4 Time Policy 9 Configure Utilities Setup Event Log Firmware Upgrade c cc ccccccsssccccceeeseesssseeeecceeesessssseeeeceeeeeessnsaees NetWork OY een E O POE Bdge ecn en ee EESE ROE oora enen E O Configure Status Overview Profile SOTIIAG ciccsceieccsssdscersesescdsciiseissnstesanesdadnoendesosvsstiosesesvoteseensdasedensesioenss DHCP CAG assesses easecnsrere since se se aeosin aaseuin secu euosonaenwohcmenasaneaueauesecenseies Extra Info Appendix A Windows TCP IP Settings Appendix B WEB GUI Valid Characters Appendix C MCS Data Rate Appendix D Enabling UPnP in Windows XP Copyright 2015 by Cerio Corporation All rights reserved Sales Mail issales cerio com tw Support supporti icerio com tw Cerio Corporation 1 Introduction 1 1 Overview CERIO OW 300N2 Outdoor AP Bridge utilizes a 1000mW high power with Aluminum Extrusion housing weatherproof Flow Bandwidth support 802 11n of up to 300Mbps Tx 300Mbps Rx link rate And Build in lightning arrester 15kV ESD OW 300N2 may connect to the WiFi mesh or WDS infrastructure and provides the subscriber with an Ethernet connection for a local access to extend the range and increase the performance of our wireless network The outdoor AP bridge may connect to the WiFi Mesh or WDS infrastructure and provides the subscriber with an Ethernet connection for a local access a
124. n Description of WDS link VV V WV Change these settings as described here and click Save button to save your changes Click Reboot button to activate your changes 5 5 a a Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO 5 10 WDS Status The Peers MAC Address antenna 0 1 received signal strength phy mode and channel bandwidth for each WDS are available WDS Link Status MAC Address RSSI TAFRX Rate TAIRA SEQ TASRX Bytes Ho WvoOS Link MAC Address Display MAC address of WDS peer RSSI Indicate the RSSI of the respective WDS s link TX RX Rate Indicate the TX RX Rate of the respective WDS s link TX RX SEQ Indicate the TX RX sequence of the respective WDS s link Disconnect Administrator can kick out a specific client click Delete button to kick out specific WDS s link VV VV WV 5 11 Associated Clients The administrator can obtain detailed wireless information and all associated clients status via this page Please click on Wireless gt Associated Clients The the Associated Clients Status appears Associated Client Status Wireless Information YAP E 4D Status Security Type Clients APO APOO WPAZ PSE YAPI APO1 Disabled WAP APO tt Disabled APOS Disabled APO Ott Disabled APUS Disabled APOE Ott Disabled APO Disabled Wireless Information Display the Virtual AP configuration information of
125. n end points and traffic class i e QOS into one large frame with a common MAC header Aggregation Frames The Aggregation Frames is in the range of 2 64 default is 32 It determines the number of frames combined on the new larger frame Aggregation Size The Aggregation Size is in the range of 1024 65535 default is 50000 It determines the size in Bytes of the larger frame 6 7 Configure Wireless Advanced Setup The administrator can change the Slot Time ACK Timeout RTS threshold and fragmentation threshold settings for the system Please click on Wireless gt Advanced Setup and follow the below setting Wireless Setup Advanced Setup Slot Time ic Distance ACK Timeout 640 Beacon Internal DTIM Interval RTS Threshlod i46 short Preamble o Enable IoMF Snooping Enable Greenfield Enable Wih Enable z 7 A Sales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw Cerio Corporation Slot Time Slot time is in the range of 9 1489 and set in unit of microsecond The default value is 9 microsecond Slot time is the amount of time a device waits after a collision before retransmitting a packet Reducing the slot time decreases the overall back off which increases throughput Back off which is a multiple of the slot time is the random length of time a Station waits before sending a packet on the LAN For a sender and receiv
126. n information of the system gt gt gt gt gt VAP Display number of system s Virtual AP ESSID Extended Service Set ID of the Virtual AP Status Display Virtual AP status currently Security Type Security type activated by the Virtual AP Clients Number of clients currently associated to the Virtual AP n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO 3 WDS Mode Configuration When WDS mode is chosen the system can be configured as an WDS mode This section provides detailed explanation for users to configure in the WDS mode with help of illustrations In the WDS mode functions listed in the table below are also available from the Web based GUI interface 3 1 Chose Your Operating Mode WDS Mode The system administrator can set the desired mode via this page and then configure the system according to their deployment needs Please click on System gt Operating Mode and follow the below setting Operating Made oP Mode WDS Mode cienteria ge Repeater AF Mode Router AP Mode P Repeater AP Mode 3 2 External Network Connection Network Requirement You could expand your Ethernet network via WDS link In this mode the OW 300N2 connects directly to a wired LAN and wirelessly bridges to a remote access point via a WDS link as shown in picture In the mode it can t associate with any wire
127. nd does not click Save button The selected Notice profile would not be saved on the Profile List Change these settings as described here and click Save button to save your changes Click Reboot button to activate your changes 6 10 Remote AP Status Show the remote bridge AP whether is link or unlinked Refresh Remote AP Status ES31D MAC Address signal Moise dbm RSSI Signal Quality 2 TXARA Rate Status default ri 0 IEA Ohl rok 6 11 Repeater AP Setup The network manager can configure related wireless settings AP Setup Security Settings and Access Control Settings Administrators can configure ESSID SSID broadcasting Maximum number of client associations security type settings and MAC Filter settings Repeater AP Setur Securify Enable Repeater AP Enable Disable Hidden SSID Enable Disable Client Isolation Enable Disable LAPP O Enable OMERE Maximum Clients caran Disable gt ESSID Extended Service Set ID When clients are browsing for available wireless networks this is the SSID that will appear in the list ESSID will determine the service type available to AP clients associated with the specified VAP gt Enable Repeater AP choose Enable or Disable Repeater AP function the default is Disable sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw ETO Hidden SSID By default it s
128. nel and output power settings for the system Please click on Wireless gt General Setup and follow the below setting Wireless Setup General Setup Ma HT Physical Mode C Address 00 11 43 00 00 0c THR Stream o gt EUR ERIE 802 11b a n v Channel Bandwidth 20 20 40 Country Extension Channel u pper Lower Channel Auto Scan AP List MCS Aggregation Disable Enable Aggregation Frames EE Aggregation Size sooo gt MAC Address The MAC address of the Wireless interface is displayed here gt Band Mode Select an appropriate wireless band bands available are 801 11 b g n mixed mode gt Country a region the OW 300N2 support region for US ETSI and Japan gt Channel Choosing the best WiFi channel Auto Scan Smart channel judgment the function can auto choose use best Channel AP List the function support search neighborhood AP and print site survey list MAC Address 4 Encryption TC OGE BAONG A TERENE J J On Curent Frequency 2 432 GHz Channel 5 n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw ETO gt TX Power You can adjust the output power of the system to get the appropriate coverage for your wireless network Specify digit numbers between level 1 to level 9 the unit is for your environment If you are not sure which setting to choose then keep the default setting lev
129. ng GMK master key used internally to generate GTKs in seconds Enter the time length required the default time is 83400 seconds Key Type Check on the respected button to enable either ASCII or HEX format for the Pre shared Key Pre Shared Key Enter the information for pre shared key the format of the information shall according to the key type selected Pre shared key can be either entered as a 256 bit secret in 64 HEX digits format or 8 to 63 ASCII characters v WPA Enterprise or WPA2 Enterprise General Setting The RADIUS authentication and encryption will be both enabled if this selected WPA General Cipher Suite Aes Group Key Update Period Master Rey Update Period Bein EAF Reauth Period Be Authentication RADIUS Sener Server IP eee bole Shared Secret Accounting RADIUS Server Enable Disable Secondary Authentication RADIUS Server Server IP Port lil Shared Secret sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw General Setting lt Cipher Suite You can chose use AES or TKIP with your WPA WPA2 encryption method AES is short for Advanced Encryption Standard The AES cipher is specified as a number of repetitions of transformation rounds that convert the input plaintext into the final output of ciphertext Each round consists of several processing steps including one that depends on the encr
130. o enable this function but disable it when the configuration is complete With this enabled someone could easily obtain the SSID information with the site survey software and get unauthorized access to a private network With this disabled network security is enhanced and can prevent the SSID from begin seen on networked Client Isolation Select Enable all clients will be isolated from each other that means all clients can not reach to other clients IAPP Inter Access Point Protocol is designed for the enforcement of unique association throughout a ESS Extended Service Set and for secure exchange of station s security context between current access point AP and new AP during hand off period gt Notice APP only used on WPA PSK and WPA2 PSK security type Only one of Notice VAPs can be enabled Maximum Clients Enter maximum number of clients to a desired number For example while the number of client is set to 32 only 32 clients are allowed to connect with this VAP VLAN Tag ID Virtual LAN the system supports tagged VLAN To enable VLAN function valid values are from 0 to 4094 Security Type Select the desired security type from the drop down list the options are WEP WPA PSK WPA2 PSK WPA Enterprise WPA2 Enterprise and WEP 802 1X Security Type HWAEP WPA PSK wWPA2 PSK WIPS Enterprise WIPA Enterprise Saas WEP a02 I v Disable Data are unencrypted during transmission when this option is selected v WEP
131. of beacons This will make the association and roaming process very responsive however the network will incur additional overhead and throughput will go down DTIM Interval The DTIM interval is in the range of 1 255 The default is 1 DTIM is defined as Delivery Traffic Indication Message It is used to notify the wireless stations which support power saving mode when to wake up to receive multicast frame DTIM is necessary and critical in wireless environment as a mechanism to fulfill power saving synchronization Sales Mail issal sales cerio com tw UppOrimMceno com tw Copyright 2015 by Cerio Corporation All rights reserved Cerio Corporation A DTIM interval is a count of the number of beacon frames that must occur before the access point sends the buffered multicast frames For instance if DTIM Interval is set to 3 then the Wi Fi clients will expect to receive a multicast frame after receiving three Beacon frame The higher DTIM interval will help power saving and possibly decrease wireless throughput in multicast applications RTS Threshold TRTS Threshold is in the range of 1 2347 byte The default is 2347 byte The main purpose of enabling RTS by changing RTS threshold is to reduce possible collisions due to hidden wireless clients RTS in AP will be enabled automatically if the packet size is larger than the Threshold value By default RTS is disabled in a normal environment supports non ju
132. on against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio technician for help FCC Caution This equipment must be installed and operated in accordance with provided instructions and a minimum 5 cm spacing must be provided between computer mounted antenna and person s body excluding extremities of hands wrist and feet during wireless modes of operation This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Any changes or modifications not expressly ap
133. onnector Integragted Power over Ethernet PoE Support PoE Bridge by LAN Port funtion Build in lightning arrester 15kV ESD Support 8 Multiple BSSID And Support IEEE802 11f IAPP Support Static Routing and RIP and OSPF Dynamic Routing Support Layer 7 Protocol Filter and Content Filter QoS Quality of Service for bandwidth management and traffic prioritization Support IEEE802 1d Spanning Tree Integragted IGMP v1 v2 v3 snooping functions and Support Web management and SNMP MIB II Sales Mail issales cerio com tw support Su cerio com tw_ JODO Copyright 2015 by Cerio Corpor Cerio Corporation gt Built in software interface allows for communicating with CERIO AM Series AP Management gt WLAN Switch or Access Controller of network management servers Networking gt gt gt gt gt Support Static IP Dynamic IP DHCP Client and PPPoE on WiFi WAN Connection Support VPN Pass Throughput PPTP IPSec L2TP and MAC Cloning Proxy DNS Dynamic DNS NTP Client Virtual DMZ Virtual Server IP Port Forwarding and Support IP MAC Filter and Support Bandwidth trafic Shaping Wireless Feature VV VV VV VV VV VV WV Transmission power control Layer 1 9 Channel selection Manual or Auto No of associated clients per AP 32 Setting for max no associated clients Yes Support 8 virtual BSSID and associated clients per AP to 32 and the Pure WDS Max 8 Setting for transmission speed Dynami
134. ons due to hidden wireless clients RTS in AP will be enabled automatically if the packet size is larger than the Threshold value By default RTS is disabled in a normal environment supports non jumbo frames Short Preamble By default its Enable To Disable is to use Long 128 bit Preamble Synchronization field The preamble is used to signal here is a train of data coming to the receiver The short preamble provides 72 bit Synchronization field to improve WLAN transmission efficiency with less overhead IGMP Snooping the process of listening to Internet Group Management Protocol IGMP network traffic The feature allows a network switch to listen in on the IGMP conversation between hosts and routers By listening to these conversations the switch maintains a map of which links need which IP multicast streams Multicasts may be filtered from the links which do not need them and thus controls which ports receive specific multicast traffic Greenfield In wireless WLAN technology greenfield mode is a feature of major components of the 802 11n specification The greenfield mode feature is designed to improve efficiency by eliminating support for 802 11b g devices in an all draft n network In greenfield mode the network can be set to ignore all earlier standards Signal LED Thresholds This function can setting RSSI number 1 99 to control signals LED s The OW 300N2 system will calculate for RSSI number and total of three LED s ind
135. oration All rights reserved Support support cerio com tw CEFIO 6 Finishing Wizard Please Wait Click Finish button to save your setting please wait till completion of the reboot process 2 AP Mode Configuration When AP mode is chosen the system can be configured as an Access Point This section provides detailed explanation for users to configure in the AP mode with help of illustrations In the AP mode functions listed in the table below are also available from the Web based GUI interface 2 1 Chose Your Operating Mode AP Mode OW 300N2 Operating mode support four operational modes AP mode the WDS mode the CPE mode and the Client Bridge Repeater AP mode respectively with built in remote management features The system administrator can set the desired mode via this page and then configure the system according to their deployment needs Please click on System gt Operating Mode and follow the below setting Operating Made ap Mode WS Mode clientBrid ge Repeater AF Mode Router 4P Mode AIF Re peater AP Mode z 2 oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO 2 2 External Network Connection gt Network Requirement Normally OW 300N2 connects to a wired LAN and provides a wireless connection point to associate with wireless client Then Wireless clients could access to LAN or Internet b
136. ormat WEP key value the system supports up to 4 sets of WEP keys 10 Characters 5 Characters 128 bit 26 Characters 13 Characters WPA PSK or WPA2 PSK WPA or WPAZ2 Algorithms allows the system accessing the network by using the WPA PSK protected access Security Type SSS aes Cipher Suite v Cipher Suite Select the desired cipher suite from the drop down list the options are AES and TKIP v Pre shared Key Enter the information for pre shared key the key can be either entered as a 256 bit secret in 64 HEX digits format or 8 to 63 ASCII characters gt Profile List The user can manage the created profiles for home work or public areas Below depict an example for Profile List Profile List Active Profile Mame E MAC Address security Type Actions 1 AP Profiled default MONE Delete Connect Click Edit an exist profile on the Profile List The field of System Configuration and Security Policy will display profile s content Edit profile s content and then click Save button to save the profile Click Delete to remove profile Click and Select a profile from list then click the Connect button to connecting to the wireless network with the profile setting n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw aa ad _ y a gomo CezIO gt If you only click Connect button a
137. otice AP modes Signal LED Thresholds LED Indicator Thresholds ASSI v LED Indicator Total of three LED s the LED1 RSSI number is Minimum Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support etn seri WMM QoS This affects traffic flowing from the access point to the client station Configuring QoS options consists of setting parameters on existing queues for different types of wireless traffic You can configure different minimum and maximum wait times for the transmission of packets in each queue based on the requirements of the media being sent Queues automatically provide minimum transmission delay for Voice Video multimedia and mission critical applications and rely on best effort parameters for traditional IP data As an Example time sensitive Voice amp Video and multimedia are given effectively higher priority for transmission lower wait times for channel access while other applications and traditional IP data which are less time sensitive but often more data intensive are expected to tolerate longer wait times WM Qos wihi Parmameters of Access Point AC Type CW min CY max AIFS TxOp Limit ACM bil Mo ACK Policy bit Ac _BE 0 d ja AC BK L d 3008 d d L504 Ac YO Us WM Parmameters of Station AC Type CV max AIFS TxOp Limit ACM bit Mo ACK Policy bil Ac BECO AC BEI AC YI A eee ell al v AC Type AC_BK Backg
138. otice blank will display content of RSA key gt Ping Watchdog The ping watchdog sets the OW 300N2 Device to continuously ping a user defined IP address it can be the internet gateway for example If it is unable to ping under the user defined constraints the OW 300N2 device will automatically reboot This option creates a kind of fail proof mechanism Ping Watchdog is dedicated for continuous monitoring of the particular connection to remote host using the Ping tool The Ping works by sending ICMP echo request packets to the target host and listening for ICMP echo response replies If the defined number of replies is not received the tool reboots the device v Enable Ping Watchdog control will enable Ping Watchdog Tool v IP Address To Ping specify an IP address of the target host which will be monitored by Ping Watchdog Tool v Ping Interval specify time interval in seconds between the ICMP echo requests are sent by the Ping Watchdog Tool Default is 300 seconds Sales Mail issales cerio com tw Support 5 cero com ba Copyright 2015 by Cerio Corporation All rights reserved uppor Cerio Corporation Y Startup Delay specify initial time delay in seconds until first ICMP echo requests are sent by the Ping Watchdog Tool The value of Startup Delay should be at least 60 seconds as the network interface and wireless connection initialization takes considerable amount of tim
139. port support cerio com tw CEFO 6 9 Station Profile Station Profile Connection Setu E Connection Setup O Fix Save General Configuration MAC Address OTA 00 000 ESSID Lock to AP aC I 0 ptionay Security Type ll t E sy Profile List Active Profile Name E 4D MAC Address security Type Actions e ib AP Profiled default MORNE Delete connect gt Connection Setup Can you choose Fix or cycle gt General Configuration MAC address The remote AP MAC Address Profile Name Set different profiles for quick connection uses ESSID Assign Service Set ID for the wireless system Lock to AP MAC the function will lock remote AP MAC Address Security Type Select an appropriate security type for association the Security Type can be selected in NONE OPEN SHARED WPA PSK or WPA2 PSK from drop down list the type needs to be the same as that associated access point v OPEN SHARED OPEN and SHARED require the user to set a WEP key to exchange data Security Type SHARED WPA PS WPA PSK sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Key Index WEP Key 1 WEP Key di WEP Key 3 WEF key i v Key index key index is used to designate the WEP key during data transmission 4 different WEP keys can be entered at the same time but only one is chosen v WEP Key Enter HEX or ASCII f
140. proved by the party responsible for compliance could void the authority to operate equipment Federal Communication Commission FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment In order to avoid the possibility of exceeding the FCC radio frequency exposure limits human proximity to the antenna shall not be less than 20cm 8 inches during normal operation CE Mark Warning This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Cerio Corporation technique support E mail support cerio com tw TEL 886 2 8667 6160 222 Web Site www cerio com tw Sales Mail issales cerio com tw 5 Up sort f iarl oe G r VT Copyright 2015 by Cerio Corporation All rights reserved uppo a
141. r Fri Sat Delete Tue Wed Friis Salt 13 30 17 00 Delete SUP Morn Tue wed Thu Fri E OOo 23 59 Delete gt Policy There are 10 Policy can be selected gt Schedule Rule Select desired schedule for this policy Time Schedule Select desired day of week and time period for this policy Below depicts an example for On Schedule and Out of Schedule sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw ETO Click Save button to add schedule to policy There are 10 schedule maximum allowed in the each time policy All schedule can be edited or removed in the each time policy Click Reboot button to activate your changes 9 Configure Utilities Setup 9 1 Profile setting The Function is backup current configuration restore prior configuration or reset back to factory default configuration can be executed via this page Please click on Utilities gt Profile Setting and follow the below setting Profile Setting Profile Setting Save Settings To Pl Save Load Settings From PC eee a Upload Reset To Factory Default Default i In this page you can save your current configuration restore a previously saved configuration or restore all of the settings in the system to the factory default settings gt Save Settings to PC Click Save button to save the current configuration to a local disk File Download Do
142. re ACK is received and throughput become low due to excessively high re transmission ACK Timeout is best determined by distance between the radios data rate of average environment The Timeout value is calculated based on round trip time of packet with a little tolerance So if experiencing re transmissions or poor performance the ACK Timeout could be made longer to accommodate OD Slot Time and ACK Timeout settings are for long distance links It is important to Notice tweak settings to achieve the optimal result based on requirement Beacon Interval Beacon Interval is in the range of 40 3500 and set in unit of millisecond The default value is 100 msec Access Point AP in IEEE 802 11 will send out a special approximated 50 byte frame called Beacon Beacon is broadcast to all the stations provides the basic information of AP such as SSID channel encryption keys signal strength time stamp support data rate All the radio stations received beacon recognizes the existence of such AP and may proceed next actions if the information from AP matches the requirement Beacon is sent on a periodic basis the time interval can be adjusted By increasing the beacon interval you can reduce the number of beacons and associated overhead but that will likely delay the association and roaming process because stations scanning for available access points may miss the beacons You can decrease the beacon interval which increases the rate
143. re authenticate service Amount of time before a client will be required to re authenticate 4 10 Repeater AP MAC Filter Setup Continue Virtual AP Setup section For each Virtual AP setting the administrator can allow or reject clients to access each Virtual AP z a oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support ceria com tw ERIO Repeater AP MAC Filter Setup MAC Rules Amie Cisabled a Se MAC Filter List MAC Address Actions MAC Address Actions Mo items in the list Action Select the desired access control type from the drop down list the options are Disable Allow or Reject v Only Allow List MAC Define certain wireless clients in the list which will have granted access to the Access Point while the access will be denied for all the remaining clients Action Type is set to Only Allow List MAC v Only Deny List MAC Define certain wireless clients in the list which will have denied access to the Access Point while the access will be granted for all the remaining clients Action Type is set to Only Deny List MAC gt Notice MAC Access Control is the weakest security approach WPA or WPA2 Notice security methods should be used when possible There are a maximum of 20 clients allowed in this Enable List The MAC addresses of the wireless clients can be added and removed to the list using the Add and Remove button
144. round Low High throughput Bulk data that requires maximum throughput and is not time sensitive is sent to this queue FTP data for example AC_BE Best Effort Medium Medium throughput and delay Most traditional IP Me eee en Ceeoteeme AC VI Video High Minimum delay Time sensitive video data is ee a aysetoniegmn AC_VO Voice High Time sensitive data like VoIP and streaming ee canna emg Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Cerio Corporation v CWimin Minimum Contention Window This parameter is input to the algorithm that determines the initial random backoff wait time window for retry of a transmission The value specified here in the Minimum Contention Window is the upper limit in milliseconds of a range from which the initial random backoff wait time is determined CWmax Maximum Contention Window The value specified here in the Maximum Contention Window is the upper limit in milliseconds for the doubling of the random backoff value This doubling continues until either the data frame is sent or the Maximum Contention Window size is reached Once the Maximum Contention Window size is reached retries will continue until a maximum number of retries allowed is reached Valid values for the cwmax are 1 3 7 15 31 63 127 255 511 or 1024 The value for cwmax must be higher than the value for cwmin o A
145. s e enemas a e Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw 5 Router AP Mode Configuration When Router AP mode is chosen the system can be configured as an Router AP mode This section provides detailed explanation for users to configure in the Router AP mode with help of illustrations In the Router AP mode functions listed in the table below are also available from the Web based GUI interface 5 1 Chose Your Operating Mode Router AP Mode CERIO OW 300N2 Supports six operational modes AP and AP WDS mode WDS mode Client Bridge Repeater AP mode WISP and WISP Repeater AP mode etc respectively with built in remote management features The system administrator can set the desired mode via this page and then configure the system according to their deployment needs Please click on System gt Operating Mode and follow the below setting Operating Mode ep Mode 05 Mode clientBridge Repeater AF Mode Router AF bode Re peater 4P Mode 5 2 External Network Connection gt Network Requirement lt can be used as an Router AP with WDS function In this mode CERIO OW 300N2 is a gateway enabled with NAT and DHCP Server functions The wireless clients connected to Internet gt Configure WAN Setup lt can be used as an Router AP with WDS function In this mode OW 300N2 is a gateway enabled with NAT and DHCP Server functions
146. s File Action View Help eo EBB m m i m Sie Services Local Mame O Description Status Startup Type LogOnds Se Shell Hardware Det Started Automatic Local System Ags Smart Card Manages 4 Manual Local Service OP Discovery Ser Enables dis Started Manual Local Service ea Ser System Event Motifi Tracks syst Started Automatic Local System Ha System Restore Se Performs 5 Started Automatic Local System Sa Task Scheduler Enables a Started Automatic Local System Sa TCP IP NetBIOS He Enables su Started Automatic Local Service S Telephony Provides T Started Manual Local System Extended standard O OSS PnP and starting the SSDP Discovery Service it may take few minutes for the Air Force One iv To be discovered and appear in your My Network Places E My Network Places File Edit view Favorites Tools Help O Bach wi P Search Folders Gi Address my Network Places Name Comments Computer Network Location A Network Tasks A t 300n 2 4Ghz 300Mbps 11nbg 1000m High Power Wireless DT 300N Local Network Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support su anes san Cerio Corporation Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules These limits are designed to provide reasonable protecti
147. s an interval of time when a WME AP has the right to initiate transmissions onto the wireless medium WM This value specifies in milliseconds the Transmission Opportunity TXOP for AP that is the interval of time when the WMM AP has the right to initiate transmissions on the wireless network ACM bit Admission Control Mandatory ACM only takes effect on AC_VI and AC_VO When you do not click Checkbox it means that the ACM is controlled by the connecting AP If you click Checkbox it means that the Client is in charge No ACK policy bit Acknowledgment Policy WWMM defines two ACK policies Normal ACK and No ACK Click Checkbox indicates No ACK When the no acknowledgement No ACK policy is used the recipient does not acknowledge received packets during wireless packet exchange This policy is suitable in the environment where communication quality is fine and interference is weak While the No ACK policy helps improve transmission efficiency it can cause increased packet loss when communication quality deteriorates This is because when this policy is used a sender does not retransmit packets that have not been received by the recipient When the Normal ACK policy is used the recipient acknowledges each received uncast packet 5 7 Create Virtual AP Virtual AP Setup The administrator can create Virtual AP via this page Please click on Wireless gt Virtual AP Setup and follow the below setting Sales Mai
148. s best determined by distance between the radios data rate of average environment The Timeout value is calculated based on round trip time of packet with a little tolerance So if experiencing re transmissions or poor performance the ACK Timeout could be made longer to accommodate gt Slot Time and ACK Timeout settings are for long distance links It is Notice important to tweak settings to achieve the optimal result based on requirement Beacon Interval Beacon Interval is in the range of 40 3500 and set in unit of millisecond The default value is 100 msec Access Point AP in IEEE 802 11 will send out a special approximated 50 byte frame called Beacon Beacon is broadcast to all the stations provides the basic information of AP such as SSID channel encryption keys signal strength time stamp support data rate All the radio stations received beacon recognizes the existence of such AP and may proceed next actions if the information from AP matches the requirement Beacon is sent on a periodic basis the time interval can be adjusted By increasing the beacon interval you can reduce the number of beacons and associated overhead but that will likely delay the association and roaming process because stations scanning for available access points may miss the beacons You can decrease the beacon interval which increases the rate of beacons This will make the association and roaming process very responsive however the network wi
149. s range Click Add button to add Virtual Server rule to List Total of maximum 20 rules are allowed in this List All rules can be edited or removed from the List Click Reboot button to activate your changes e ars a n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Cerio Corporation gt Schedule Can choose to use rule by Time Policy While creating multiple Virtual Server rules the prior rules have higher priority The Virtual server rules have precedence over the DMZ one while both rules exist Example 1 and 2 demonstrate proper usage of DMZ and Virtual Server rules Example 1 All connections should be redirected to 192 168 2 12 while DMZ is enabled Since Virtual Server rules have precedence over the DMZ rule all connections to TCP port 22 will be directed to TCP port 22 of 192 168 2 10 and remaining connections to port TCP 20 80 will be redirected to port TCP 20 80 of 192 168 2 11 Ex DMZ Enabled 192 168 2 12 Rule Protocol Private IP Private Port Public Port 1 TCP 192 168 2 10 22 22 2 TCP 192 168 2 11 20 80 20 80 Example 2 All connections should be redirected to 192 168 2 12 while DMZ is enabled Since Virtual Server rules have precedence over the DMZ rule all other connections to TCP port 20 80 will be redirected to port 20 80 of 192 168 2 11 The rule 2 won t take effect Ex DMZ Enabled 192 168 2 12 Rule Protocol Pri
150. ser to restart system with existing or most current settings when changes are made Click Reboot button to proceed and take around three minutes to complete Reboot ine Sometimes it may be necessary to reboot the system if it begins working improperly Rebooting the system will not delete any of your configuration settings Click reboot button to reboot the system Reboot Please Wait The System Overview page appears upon the completion of reboot e ars a n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO 10 Configure Status 10 1 Overview Detailed information on System Network can be reviewed via this page Overview Device Information LAN Information Traffic Monitor Mode WISP Repeater AP IP Address 192 168 2 254 Firmware Version Cen CPE N2H104 V1 0 0 BETA IP Netmask 255 255 255 0 Firmware Date 2012 12 21 14 22 56 System Time 1970 01 01 00 02 03 CPE Information Traffic Monitor System Up Time 02 03 5 n Up Time 3 Internet Connection Type Dynamic IP MAC 00 17 43 00 00 0B ETH1 MAC 00 11 0 06 Reconnect Mode Renew nRa ETH2 MAC 00 11 43 00 00 04 IP Address aadress Wireless MAC 00 11 43 00 00 0C IP Netmask Netmask CPU Loading 8 IP Gateway Memory Used 74 DNS Wireless Information Traffic Monitor Band 802 11b g n Channel 1 Current Txpower 29 dBm 794 m Status BSSID System Information
151. ses Important and must note That MAC filter rules have precedence over IP Filter rules Please click on Advance gt MAC Filter Setup and follow the below setting MAC Filter Setup WAC Rules Amd Cisabled ka Save Seen Says Run Click Save button to save your change Two ways to set the MAC Filter List MAC Filter Rule By default it s Disable Options are Disabled Only Deny List MAC or Only Allow List MAC gt Action Only Allow List MAC The wireless clients in the MAC Filter List will be allowed to access to Access Point All others will be denied Only Deny List MAC The wireless clients in the MAC Filter List will be denied to access to Access Point All others will be allowed gt MAC Address Enter MAC address e g aa bb cc 00 00 0a and click Add button then the MAC address should display in the MAC Filter List There are a maximum of 20 clients allowed in this MAC Filter List The MAC addresses of the wireless clients can be added and removed to the list using the Add and Delete buttons gt Schedule Can choose to use rule by Time Policy Click Reboot button to activate your changes l Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CERO 8 4 Virtual Server The Virtual Server can also referred to as Port Forward as well and used interchangeably Resources in the network can be
152. special circumstances sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Cerio Corporation Extension Channel Only for Channel Bandwidth 40 MHz Select the desired channel bonding for control MCS This parameter represents transmission rate By default Auto the fastest possible transmission rate will be selected You have the option of selecting the speed if necessary Shout GI Short Guard Interval by default it s Enable it s can increase throughput However it can also increase error rate in some installations due to increased sensitivity to radio frequency reflections Select the option that works best for your installation Aggregation By default it s Enable To Disable to deactivated Aggregation A part of the 802 11n standard or draft standard It allows sending multiple frames per single access to the medium by combining frames together into one larger frame It creates the larger frame by combining smaller frames with the same physical source and destination end points and traffic class i e QOS into one large frame with a common MAC header Aggregation Frames The Aggregation Frames is in the range of 2 64 default is 32 It determines the number of frames combined on the new larger frame Aggregation Size The Aggregation Size is in the range of 1024 65535 default is 50000 It determines the size in Bytes of
153. ss customers In the WISP mode OW 300N2 is a gateway enabled with NAT and DHCP Server functions The wired clients connected to OW 300N2 are in different subnet from those connected to Main Base Station and in WISP mode it does not accept wireless association from wireless clients notice In WISP mode the WAN port is the Wireless interface n ergs Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CEFO 6 3 Configure CPE WAN Setup It can be used as an Router AP with WDS function In this mode OW 300N2 is a gateway enabled with NAT and DHCP Server functions The wireless clients connected to Internet There are three connection types for the WAN port Static IP Dynamic IP PPPoE and PPTP Please click on System gt CPE and follow the below setting CPE Setup Internet Connection Type Mode statici Oynamicie pppoe Frrr Static IP ees 192 100 1 254 TR GUERE 25 29 9 295 0 IP ts ateway 192 168 1 1 DNS Le Mo Default DNS Server Specify DMS Serwer IF Primary DMS Service Enable Disable MAC Clone o keep Default MAC Address Clone MAC Address 0cgdieal icoec Manual MAC Address a a a mm Mode By default it s Static IP Check Static IP Dynamic IP PPPoE or PPT P to set up system WAN IP Y Static IP Users can manually setup the WAN IP address with a static IP provided
154. ssssseeeececeseeessseeeeeeeeeens TI 5 7 Create Virtual AP Virtual AP Setup uuu sssssssseseseeeseseseseeeseeees 81 5 8 Virtual AP General Configuration 0 oc ceecccccccccccssssssseeeseeceeeessssseeeeeeeeseeaaes 82 5 9 WDS Setup Expand your Wireless Network 0 00 0ccccccccccccccssssssseeeceeeseesssaeees 90 5 10 WOS SaS arene a EA E ETE A E EEOAE A O A EEE 91 5 11 Associated CS acs ceca 9 6 WISP AP Mode Configuration ccccccccsssssssssccccscccsssssssssssscccssseesessses 92 6 1 Chose Your Operating Mode WISP Repeater AP Mode 00 a 92 6 2 External Network Connection Network Requirement cccccccccessreeeees 92 6 3 Configure CPE WAN Setup 0 0 cc ccccsssscccceesssseeeceeesssseeceeesssseeeeeeessseeeeeessaseees 93 6 4 Configure OW 300N2 LAN IP Address 000000000 cccccccccccccccessessseceeeeecesesessseeeeeees 97 6 5 Configure DDNS Setup cccccccssscccecccceeesssssseeecceceessssseeeceeseseeessseeeeeeeeeens 99 6 6 Wireless General Setup oc cccccccccccseesssssssseesessessecccesesssseeessesssssseeeeeeeseeees 100 6 7 Configure Wireless Advanced Setup oc cc ccccccsscccccecessssssssseeeceeessessseeeeees 101 6 8 SNE OY sacra es se cee aed poe aan tg penenee aes 107 6 9 Sallon od 1 Seen ne nn ne E E eee ee nee ee 108 6 10 Remote AP CIS osc este secansadnarcvnsersceonsenocecstoseinntadnavesnernsdeannbonceaseosemsanddaauensbinsdeans
155. st ESSID will determine the service type available to AP clients associated with the specified VAP Enable Repeater AP choose Enable or Disable Repeater AP function the default is Disable Hidden SSID By default it s Disable Enable this option to stop the SSID broadcast in your network When disabled people could easily obtain the SSID information with the site survey software and get access to the network if security is not turned on When enabled network security is enhanced It s suggested to enable it after AP security settings are archived and setting of AP clients could make to associate to it Client Isolation By default it s Disable Select Enable all clients will be isolated from each other which means they can t reach each other IAPP Inter Access Point Protocol is designed for the enforcement of unique association throughout a ESS Extended Service Set and for secure exchange of station s security context between current access point AP and new AP during hand off period Maximum Clients The default value is 32 You can enter the number of wireless clients that can associate to a particular SSID When the number of client is set to 5 only 5 clients at most are allowed to connect to this VAP Security Type Select the desired security type from the drop down list the options are Disable WEP WPA PSK WPA2 PSK WPA Enterprise WPA2 Enterprise and WEP 802 1X Disable Data are unen
156. t ARP Table Information on the drop down list to display ARP table ARP associates each IP address to a unique hardware address MAC of a device It is important to have a unique IP address as final destination to switch packets to Extra Information Ewe SEP Table Information ol ARP Table Information IP Address MAC Address Interface 192 166 2 22 aC eaO2icherc bred sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CeEzIO gt Bridge table information Select Bridge Table information on the drop down list to display bridge table Bridge table will show Bridge ID and STP s Status on the each Ethernet bridge and its attached interfaces the Bridge Port should be attached to some interfaces e g eth2 ra0 ra and wdsO wds3 Extra Information Bridge Table Information Bridge Port Bridge ID STP Enabled Interface LAM ha ethi etho gt Bridge MACs Information Select Bridge MACs Information on the drop down list to display MAC table This table displays local MAC addresses associated with wired or wireless interfaces but also remember non local MAC addresses learned from wired or wireless interfaces Ageing timers will be reset when existing MAC addresses in table are learned again or added when new MAC addresses are seen from wired or wireless interfaces as well When time runs out for a particular entry it will be prune
157. t is for your environment If you are not sure which setting to choose then keep the default setting level 9 100 gt HT Physical Mode HT Physical Mode TARY Stream 1 6 Channel Bandwidth 20 20 40 MICS short GI Disable Enable Aggregation Disable Enable Aggregation Frames Aggregation Size Ri Tx Rx Stream By default it s 2 Channel Bandwidth The 20 40 MHz option is usually best The other option is available for special circumstances MCS This parameter represents transmission rate By default Auto the fastest possible transmission rate will be selected You have the option of selecting the speed if necessary sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CeEzIO Shout GI Short Guard Interval by default it s Enable it s can increase throughput However it can also increase error rate in some installations due to increased sensitivity to radio frequency reflections Select the option that works best for your installation Aggregation By default it s Enable To Disable to deactivated Aggregation A part of the 802 11n standard or draft standard It allows sending multiple frames per single access to the medium by combining frames together into one larger frame It creates the larger frame by combining smaller frames with the same physical source and destinatio
158. tches the rules X Per Rule Mel inal t comment Type Upload kbps Download kbps gt Comment Enter a descriptive name for this rule for identifying purposes gt IP Address IP segment Specify local LAN destination IP addresses range required for this rule If you specify local IP addresses range from 192 168 1 1 to 192 168 1 254 The matches a range of local IP addresses include every single IP address from the first to the last so the example above includes everything from 192 168 1 1 to 192 168 1 254 gt Port Specify local port LAN port range required for this rule gt MAC Enter MAC address in valid MAC address format xx xx xx xx Xx xx and click Add gt Application the Layer 7 application control support Bittorrent eDonkey2000 FTP and HTTP Bittorrent eDonkeyv2000 FTP HTTP e ars a n Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CezlO 8 IP Routing The IP Routing Settings allows you to configure routing feature in the gateway The system supports RIP Routing Information Protocol and OSPF Open Shortest Path First dynamic routing and allows you to manually configure static network routes Please click on Advance gt IP Routing and follow the below setting IP Routing Setup OSPF Settings Static Routing Setup OSPF Service Enable 4 Disable Service o Enable Disable
159. terface Intuitive Web Management Interface Administrative Access HTTP and HTTPS and support CLI access via Telnet and SSH Support Firmware Upgrade via Web Reset to Factory Defaults Support SNMP v1 v2c v3 MIB Il UPnP Universal Plug and Play NTP Time Synchronization SNMP Traps to a List of IP Address Support Event log VV VV V V 1 5 Panel Function Description There is several LED indicators on the front of the OW 300N2 Please refer to the definitions below Sales Mail issales cerio com tw support Su cerio com tw_ JODO Copyright 2015 by Cerio Corpor Cerio Corporation 1 The Ethernet connect of LAN Port 2 The LED indicator of LAN Port 3 At in Reset button 4 The Ethernet connect of WAN PoE Port 5 The LED indicator of WAN Port 6 Power LED 7 The three LED s for strong or weakly indicator on signal bridge and the three LED s only support Client Bridge Repeater AP and WISP Repeater AP modes Antenna Description N Type 1 N Type 2 1 6 Ground connection install a method Back Sales Mail issales cerio com tw fis hee M pri 2015 by Cerio Orporation All Pig i F s ory E j zi E s Sup ort SUDDO HEC m ry i POF Ti m _ Cerio Corporation 1 7 Software Configuration OW 300N2 supports web based configuration Upon the completion of hardware installation OW 300N2 can be configured through a PC NB by using its web browser such as
160. the larger frame Change these settings as described here and click Save button to save your changes Click Reboot button to activate your changes The items in this page is for AP s RF general settings and will be applied to all VAPs and WDS Link 2 5 Configure Wireless Advanced Setup The administrator can change the Slot Time ACK Timeout RTS threshold and fragmentation threshold settings for the system Please click on Wireless gt Advanced Setup and follow the below setting Copyright 2015 by Cerio LT Sales Mail issales cerio com tw Support sul ia cero com tw cE Wireless Setup Advanced Setup ACK Timeout Beacon Interval Shot Time a Distance DTIM Interval RTS Threshlod Short Preamble Enable IShP Snooping Enable Greenfield Enable WMM Enable Slot Time Slot time is in the range of 9 1489 and set in unit of microsecond The default value is 9 microsecond Slot time is the amount of time a device waits after a collision before retransmitting a packet Reducing the slot time decreases the overall back off which increases throughput Back off which is a multiple of the slot time is the random length of time a station waits before sending a packet on the LAN For a sender and receiver own right of the channel the shorter slot time help manage shorter wait time to re transmit from collision because of hidden wireless clients or other causes When collision sources
161. the system gt VAP Display number of system s Virtual AP gt ESSID Extended Service Set ID of the Virtual AP gt Status Display Virtual AP status currently z a oales Mail issales icerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw a a oO i N G gt Security Type Security type activated by the Virtual AP gt Clients Number of clients currently associated to the Virtual AP 6 WISP AP Mode Configuration When WISP AP Mode is chosen the system can be configured as an WISP AP Mode This section provides detailed explanation for users to configure in the WISP AP Mode with help of illustrations In the WISP AP Mode functions listed in the table below are also available from the Web based GUI interface 6 1 Chose Your Operating Mode WISP Repeater AP Mode The system administrator can set the desired mode via this page and then configure the system according to their deployment needs Please click on System gt Operating Mode and follow the below setting Operating Mode op Mode ADS Mode clientBrid ge Repeater AP Mode Router AP Mode AIP Re Heater AP bode 6 2 External Network Connection Network Requirement lt can be used as an Outdoor Customer Premises Equipment WISP to receive wireless signal over last mile application helping WISPs deliver wireless broadband Internet service to residents and busine
162. the value for cwmin AIFS The Arbitration Inter Frame Spacing Number specifies a wait time in milliseconds for data frames TxOP Limit Transmission Opportunity is an interval of time when a WME AP has the right to initiate transmissions onto the wireless medium WM This value specifies in milliseconds the Transmission Opportunity TXOP for AP that is the interval of time when the WMM AP has the right to initiate transmissions on the wireless network ACM bit Admission Control Mandatory ACM only takes effect on AC_VI and AC_VO When you do not click Checkbox it means that the ACM is controlled by the connecting AP If you click Checkbox it means that the Client is in charge No ACK policy bit Acknowledgment Policy WMM defines two ACK policies Normal ACK and No ACK Click Checkbox indicates No ACK When the no acknowledgement No ACK policy is used the recipient does not acknowledge received packets during wireless packet exchange Sales Mail issales cerio com tw 4 tel a pad tinted et alt E ia x k Copyright 2015 by Cerio Corporation All rights reserved aias This policy is suitable in the environment where communication quality is fine and interference is weak While the No ACK policy helps improve transmission efficiency it can cause increased packet loss when communication quality deteriorates This is because when this policy is used a sender does not retransmit p
163. thentication sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CezIO Authentication RADIUS Server Settings lt Authentication Server Enter the IP address of the Authentication RADIUS server lt Port The port number used by Authentication RADIUS server Use the default 1812 or enter port number specified lt Shared secret The secret key for system to communicate with Authentication RADIUS server Support 1 to 64 characters lt Accounting Server Check on the respected button to enable either Enable or Disable accounting RADIUS server Secondary Authentication RADIUS Server lt Authentication Server Enter the IP address of the Authentication RADIUS server lt Port The port number used by Authentication RADIUS server Use the default 1812 or enter port number specified lt Shared secret The secret key for system to communicate with Authentication RADIUS server Support 1 to 64 characters gt VAP MAC Filter Setup In this function the administrator can be allow or reject clients to access Virtual AP Please click on Wireless gt Virtual AP Setup gt MAC Filter Setup click Setup of Virtual AP List and then MAC Filter Setup page appears Follow the below setting Virtual AP Overview WAP List YAP MAC Address ESD Status Security Type MAC Filter Edit MAC Filter Status YAP Edit VAPO OO TAS OO 0000 APOO WPA PSK Edit D
164. ting RADIUS server Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CezIO Secondary Authentication RADIUS Server Secondary Authentication RADIUS Server Port lt Authentication Server Enter the IP address of the Authentication RADIUS server lt Port The port number used by Authentication RADIUS server Use the default 1812 or enter port number specified lt Shared secret The secret key for system to communicate with Authentication RADIUS server Support 1 to 64 characters v WEP 802 1x When WEP 802 1x Authentication is enabled please refer to the following Dynamic WEP and RADIUS settings to complete the configuration Dynamic WEF Settings WEP Key Length 4bits izbit WEP Key Update Period EAP Reauth Period EUI Authentication RADIUS Server Server IP Port lil Shared Secret Accounting RADIUS Server Enable Disable Secondary Authentication RADIIS Server serwer IP eee lol Shared Secret Dynamic WEP Settings lt WEP Key length Check on the respected button to enable either 64bits or 128bits key length The system will automatically generate WEP keys for encryption lt WEP Key Update Period The time interval WEP will then be updated the unit is in seconds default is 300 seconds 0 do not rekey lt EAP Reauth Period EAP re authentication period in seconds default is 3600 0 disable re au
165. tion Profile Connection Setup Connection Setup Fix Save General Configuration MAC Address OMILLA 00 00 00 Lock to AP MACI D tional Securify Type Profile List Active Profile Name ES4ID MAC Address Security Type Actions Oo A AP Profiled default MORNE Delete connect gt Connection Setup Can you choose Fix or cycle gt General Configuration MAC address The remote AP MAC Address Profile Name Set different profiles for quick connection uses ESSID Assign Service Set ID for the wireless system Lock to AP MAC the function will lock remote AP MAC Address Security Type Select an appropriate security type for association the Security Type can be selected in NONE OPEN SHARED WPA PSK or WPA2 PSK from drop down list the type needs to be the same as that associated access point Security Type Bhs OPEN SHARED WPA PSK WPA PSK v OPEN SHARED OPEN and SHARED require the user to set a WEP key to exchange data sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw Security Type Saal iw Key Indexi weP key 1 O O O O O O OOOO O WEP Key 2i WEP Key WEP Kew 4 Y Key Index key index is used to designate the WEP key during data transmission 4 different WEP keys can be entered at the same time but only one is chosen v WEP Key Enter HEX or ASCII format WEP
166. upports seven operational modes the Router AP mode Router AP WDS mode and Pure AP mode AP WDS mode and the Pure WDS mode and the Client Bridge Repeater AP Mode and WISP Repeater AP mode etc respectively with built in remote management features simplify the deployment and reduce cost for continued maintenance of the outdoor bridge Wireless Architecture Mode Pure AP Mode amp AP AP WDS Mode gt It can be deployed as a tradition fixed wireless Access Point gt t allow wireless clients or Stations STA to access gt This enables the wireless interconnection of Access Point in an IEEE802 11 network and accept wireless clients at the same time Pure WDS Mode gt This enables the wireless interconnection of Access Point in an IEEE802 11 network gt It allows a wireless network to be expanded using multiple access point without the need for a wired backbone to link them gt This also be referred to as repeater mode It cannot allow wireless clients or Stations STA to access Client Bridge Repeater AP Mode gt It can be used as an Client Bridge Repeater AP to receive wireless signal over last mile applications helping WISPs deliver wireless broadband Internet service to new residential and business customers Copyright 2015 by Cerio Corpor JODO Sales Mail issales cerio com tw support Su cerio com tw_ Cerio Corporation gt In this mode OW 300N2 is enabled with DHCP Server functions
167. use rule by Time Policy amp All packets are allowed by default Deny rules could be added to the filter list to filter out Notice unwanted packets and leave remaining allowed Click Save button to add IP filter rule Total of 20 rules maximum allowed in the IP Filter List All rules can be edited or removed from the List Click Reboot button to activate your changes When you create rules in the IP Filter List the prior rules maintain higher priority To allow limited access from a subnet to a destination network manager needs to create allow rules first and followed by deny rules So if you just want one IP address to access the system via telnet from your subnet not others the Example 1 demonstrates it not rules in the Example 2 Example 1 Create a higher priority rule to allow IP address 192 168 2 2 Telnet access from LAN port first and deny Telnet access from dadls IP addresses in the same subnet In Out Protocol Listen Action Side O EA IP Mask Example 2 All Telnet access to the system from the IP addresses of subnet 192 168 2 x works with the rule 1 of Example 2 The rule 2 wont make any difference In Out Protocol Listen Action Side IP Mask IP Mask Sales Mail issal cerio tw Copyright 2015 by Cerio Corporation All rights reserved l Supp sae aii 8 3 MAC Filter Allows to create MAC filter rules to allow or deny unicast or multicast packets from limited number of MAC addres
168. vate IP Private Port Public Port 1 TCP 192 168 2 11 20 80 20 80 2 TCP 192 168 2 10 22 22 8 5 Parental Control Parental Control allows you to block or allow specific kinds of Internet usage and traffic such as Internet access designated services and websites Please click on Advance gt Parental Control and follow the below setting Sales Mail issales cerio com tw Support suppori icerio com tw Copyright 2015 by Cerio Corporation All ri CezlO Parental Control Setup Rules Comment MAC Address Remove Destination IF Re Protocol eat Local Port Destination Port Seen Sivas RUM Se PyPCe 6 Enable o Disable Rules Control can be managed by a rule Use the settings on this screen to establish an access policy gt Comment Enter a descriptive name for this rule for identifying purposes gt MAC Address Enter MAC address in valid MAC address format xx xx xx Xx Xx xXx and click Add button to add in the MAC group of each rule Click Remove button can remove MAC address in the group of each rule There are 10 MAC address maximum allowed in each rule gt Local Destination IP Specify local LAN destination IP addresses range required for this rule If you specify local IP addresses range from 192 168 1 1 to 192 168 2 254 The matches a range of local IP addresses include every single IP address from the first to the last so the example above includes everything from 192 168 1 1 to 192
169. y associating themselves with OW 300N2 set in AP mode 2 3 Configure OW 300N2 LAN IP Address Here are the instructions to setup the local IP Address and Netmask Please click on System gt LAN and follow the below setting LAN Setup Ethernet Connection Type Mode Static IP Dynamic IF static IP IF Address 1 42 160 2 254 IP Metriask ee ONS No Default CNS Server Specify ONS Server IP Primary DMS Secondary CMS a02 1d Spanning Tree Se PyulCe Enable Disable gt Ethernet Connection Type Check either Static IP or Dynamic IP button as desired to set up the system IP of LAN port gt Static IP The administrator can manually setup the LAN IP address when static IP is available preferred v IP Address The IP address of the LAN port default IP address is 192 168 2 254 v IP Netmask The Subnet mask of the LAN port default Netmask is 255 255 255 0 v IP Gateway The default gateway of the LAN port gt Dynamic IP This configuration type is applicable when the OW 300N2is connected to a network with the presence of a DHCP server all related IP information will be provided by the DHCP server automatically sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw e710 LAN Setup Ethernet Connection Type Mode Static IP ovnamic IP Dynamic IP Hostname A v Hostname The Hostname of the LAN port
170. ying GTK broadcast multicast encryption keys in seconds Entering the time length is required sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CezIO WPA Enterprise or WPA2 Enterprise The RADIUS authentication and encryption will be both enabled if this is selected WPA General Cipher Suite Aes Group Key Update Period Master Rey Update Period ERII EAP Reauth Period bay Authentication RALIUS Server Server IP Port lil Shared Secret Accounting RADIUS Server 4 Enable Disable Secondary Authentication RADIUS Server serwer IP Port 1il Shared Secret WPA General Settings v Cipher Suite By default it is AES Select either AES or TKIP cipher suites v Group Key Update Period By default its 3600 seconds This time interval for rekeying GIK broadcast multicast encryption keys in seconds Entering the time length is required v PMK Cache Period By default it s 10 minutes Set WPA2 PMKID cache timeout period after time out the cached key will be deleted v Pre Authentication By default it s Disable To Enable is use to speed up roaming before pre authenticating IEEE 802 1X EAP part of the full RSN authentication and key handshake before actually associating with a new AP Nore PMK Cache Period and Pre Authentication is used in WPA2 Enterprise Authentication Radius Server Settings v IP Address Ent
171. you want to save this file or find a program online to open it E Mame config bin Type Unknown File Type From 9 192 168 2 254 WW hile files from the Internet can be useful some files can potentially harm your computer IF you do not trust the source do not tind a program to open this file or save this file What s the risk gt Load Settings from PC Click Browse button to locate a configuration file to restore and then click Upload button to upload gt Reset To Factory Default Click Default button to reset back to the factory default settings and expect Successful loading message Then click Reboot button to activate e es a 5 Sales Mail issales cerio com tw Copyright 2015 by Cerio Corporation All rights reserved Support support cerio com tw CERIO 9 2 Firmware Upgrade Firmware is the main software image that system needs to respond to requests and to manage real time operations Firmware upgrades are sometimes required to include new features or bugs fix It takes around 2 minutes to upgrade due to complexity of firmware To upgrade system firmware click Browse button to locate the new firmware and then click Upgrade button to upgrade Firmware Upgrade Firmware Information Upgrade Via Local PC Firmware version Cen CPE N2H104 V1 0 0 BETA Select File a Upgrade Firmware Date 2012 12 21 14 22 56 Upgrade Via TFTP Server File Name Upgrade Upgrade Upgrade Via HTTP URL 1 To prevent data
172. yption key A set of reverse rounds are applied to transform ciphertext back into the original plaintext using the same encryption key TKIP is short for Temporal Key Integrity Protocol TKIP scrambles the keys using a hashing algorithm and by adding an integrity checking feature ensures that the keys haven t been tampered with lt Group Key Update Period This time interval for re keying GTK broadcast multicast encryption keys in seconds Enter the time length required the default time is 600 seconds lt Master Key Update Period This time interval for re keying GMK master key used internally to generate GTKs in seconds Enter the time length required the default time is 83400 seconds lt EAP Reauth Period This time interval for re authentication in seconds Enter the time length required the default time is 3600 seconds 0 disable re authentication Authentication RADIUS Server Settings Authentication RADIUS Sener Port lil Shared Secret Accounting RADIUS Server Enable Disable lt Authentication Server Enter the IP address of the Authentication RADIUS server lt Port The port number used by Authentication RADIUS server Use the default 1812 or enter port number specified lt Shared secret The secret key for system to communicate with Authentication RADIUS server Support 1 to 64 characters lt Accounting Server Check on the respected button to enable either Enable or Disable accoun

OW-300N2 User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents