Auto-Drive Ride-On Mower Owners Manual
Contents
1. Front Tyres 4 1 x 6 tubeless Pressure 16 Psi Rear Tyres 16 x 6 5 x 8 tubeless Pressure 20 Psi Throttle control with Fast Slow and Choke positions Key switch with Off On and Start positions 325mm diameter 1 turns lock to lock Foot operated pedal on left side of machine Hand operated catch knob on left hand side of machine used in conjunction with clutch brake pedal Foot operated pedal located on right side of machine Spring loaded so as to return to neutral position Lever right hand side 6 cutting height positions from 15 to 65mm Lever located on left side of seat 135cm 164cm 80cm 95cm 5 8m 2 0m 195kg Trouble Shooting Please contact your Authorised Sanli Ride On Dealer for further details O SANLI Call the Sanli Customer Service Desk on 1800 466 068 Email support sanli com au Web www sanli com au Head Office 9 Gatwood Close Padstow NSW 22112. The spark plug gap gradually increases during engine running and should be checked periodically and whenever the engine malfunctions Spark plug should be inspected regularly and maintained as per the engine manufacturer s manual supplied Air Cleaner Air cleaner should be inspected regularly and maintained as per the engine manufacturer s manual supplied Technical Specifications Model Number ADR1130 Engine Type Briggs amp Stratton 4 Stroke 10 5 hp 344cc Fuel Capacity 4 0 Litres Oil Capacity 1 42 Litres Lubrication Gear Impellor Spark Plug Champion RC12YC Spark Plug Gap 0 7 to 0 8mm Ignition Type Magnetron Engine Oil SAE 30 10 Transmission Auto Drive system consists of a continuous belt being driven by an idler pulley over two drive pulleys and around a return pulley Friction plates are brought into contact with the drive pulleys to impart either forward or reverse motion to rear drive wheels by means of a drive selector pedal on the right side of the machine Ground speed at 3600 rpm is variable due to Auto Drive system depending on pressure applied to drive selector pedal Maximum Speed 8 6 km h Cutting Deck Cutting Width Tyres Controls Steering Wheel Clutch Brake Parking Brake Drive Selector Cutting Height Cutter Drive General Wheel Base Length Width Height Turning Circle Turning Radius Weight Full floating pressed steel housing with right side discharge 760 mm 80
3. Owners Manual Please read this instruction manual carefully before operating your new Sanli Ride On Mower Model number ADR1130 Congratulations on choosing a Sanli mower 12 Month Warranty 24 Month Engine Warranty Thank you for your purchase This product comes with a manufacturer s warranty from Sanli Australia Development Pty Ltd that your new product will be free from defects in materials and workmanship for the period stated above from the date of purchase provided that the product is used in accordance with accompanying recommendations or instructions where provided This warranty is in addition to your rights under the Australian Consumer Law You will be provided with a refund repair or exchange by Sanli for this product if it becomes defective within the warranty period Sanli will bear the reasonable expense of claiming the warranty This warranty will no longer apply where the defect is a result of alteration accident misuse abuse or neglect Please retain your receipt as proof of purchase and contact Sanli s Customer Service Centre on 1800 466 068 or alternatively via email at support sanli com au for any difficulties with your product Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or re
4. flammable and dangerous 11 Always use 95 octane unleaded petrol not more than 3 months old Fill the tank using a funnel but never completely Clean up any overflow or splashes before starting 12 Never open the fuel filler cap or fill the tank if the engine is running or is still hot after use And please ensure that you securely tighten the petrol cap after filling 13 Do not transport your ride on mower in a vehicle if there is any petrol in the tank 14 Store your ride on mower along with any fuel and oil in a cool well ventilated place away from direct sunlight and not near gas cylinders or hot water heater systems 15 Do not smoke when filling the fuel tank using your ride on mower or when petrol is in the immediate area And never use or store the ride on mower near a naked flame 16 Sanli recommends that you wear a safety helmet ear protectors safety goggles and safety boots when using your ride on mower 17 All servicing and repair work under warranty must be carried out by an Authorised Dealer Ride On Features Rear mounted Seat adjustment engine lever NV Adjustable A high back seat Comfort steering wheel Rear engine safety guard with light towing bracket F A Ss GN Throttle control To J n Ea Grass deflector chute Safety guard mounting bolts Fig 1 Cutting height adjuster Foot operated drive selector Auto drive pedal Bra
5. al injury to the user and to others may result if this section is not read and acted upon at all times 1 Never use your ride on mower when tired or fatigued as lack of alertness may cause serious injury 2 Before starting your ride on mower inspect it carefully to ensure that there are no loose parts and that it is in good working order 3 Clear the area to be mowed of any stones sticks wire and debris before beginning and always ensure that you mow a safe distance away over 14 metres from adults children and animals 4 Keep hands feet and clothing away from the ride on mower s moving parts and always wear appropriate footwear avoid sandals or open shoes 5 Never put your hands or feet underneath the cutting deck of the ride on mower while the engine is running 6 Be aware that the machine s exhaust area and other parts of the ride on mower get very hot during and right after use 7 Turn off the engine and disconnect the spark plug cap before cleaning transporting or making adjustments and never leave the ride on mower unattended with the key in the ignition 8 Mow up and down slopes and never across a slope And always be extremely cautious when changing direction on slopes 9 We strongly recommend you avoid mowing when it is raining or after nightfall 10 Do not fill the tank or start the ride on mower indoors or in a poorly ventilated area as exhaust gases contain poisonous substances and petrol fumes are
6. g height 4 Move throttle to about position 5 Engage cutter drive 6 Select desired drive 7 Slowly release clutch brake pedal to drive To Stop Engine 1 Depress clutch brake pedal 2 Shift the drive selector to neutral 3 Disengage the cutter drive 4 Apply the parking brake 5 Move throttle lever to the slow position 6 Turn the ignition key to OFF Remove the keys Safety Information 1 The parking brake should always be applied before leaving the machine 2 The parking brake must be released before attempting to drive 3 Depress the clutch brake pedal when starting or when coming to rest Engaging Clutches When engaging the cutter drive lever or releasing the clutch brake pedal always operate slowly and avoid any jerking motion Moving these controls too fast could overload and stall the engine WARNING To avoid loss of control always come to a complete stop before changing drive direction and slow down before turning Maintenance Warning Regular service by a qualified Sanli Dealer is paramount to ensuring a safe trouble free operation The ride on mower needs to be kept clean to assist inspection for loose worn or damaged parts before each use Proper care and maintenance is the responsibility of the owner Oil Change Sanli recommends that you change your engine oil after the first 5 hours of use and then as per the schedule outlined in the engine manufacturer s manual supplied with this machine Spark Plug
7. ke Clutch Ignition switch pedal a geen E w gt e Cutter drive Safety guard Fig 2 Parking brake knob lever 760mm 30 Cutting Deck mounting bolts Sanli Ride On Mower User Guide 5 Assembly Instructions Parts that require assembly Steering wheel e Steering housing e Seat plate assembly e Rear engine safety guard e holes Fig 3 Fig 4 Fig 5 Fitting Steering Wheel 1 Position housing fig 3 in place and using the housing screws supplied insert into holes and tighten securely without over tightening as in fig 5 2 Position steering wheel over steering shaft and align appropriately as in fig 5 3 Insert the long steering wheel bolt and washer through the top of steering wheel and screw into steering shaft Tighten appropriately fig 4 4 Replace steering wheel cap to cover exposed bolt head Fitting Rear Engine Safety Guard 1 The guard is attached to the mower chassis using the 4 x bolts and nuts supplied fig 6 2 Position the guard so that the holes are aligned with the holes on the mower chassis fig 1 amp 2 3 Secure in place Fitting Seat plate Assembly 1 The seat plate is attached to the mower chassis using the 2 x bolts and nuts supplied fig 7 Position the seat plate so that the holes are aligned with the holes on the mower chassis fig 7 Secure in place 2 Connect safety switch wiring harness as shown in fig 7a 6 Sa
8. nli Ride On Mower User Guide Before Operating Fill Crankcase with SAE 30 oil Oil must be added before attempting to start the engine 1 2 3 Fill Fuel Tank Use only clean fresh 95 Octane regular unleaded petrol must be less than 3 months old a 2 Adjusting the Seat In order to find the most suitable seating position adjust seat by using the lever located on right side of seat fig 10 Place machine on level surface Unscrew and remove dipstick from oil filler tube fig 8 Insert a clean funnel into filler tube and slowly add oil in accordance with the engine manufacturer s direction Ensure oil level is at the full mark on the dipstick when screwed completely in When finished replace dipstick and retighten Using a clean funnel fill tank with unleaded petrol Replace cap fig 9 Wipe up any petrol that may have spilled Fig 10 Sanli Ride On Mower User Guide 7 Controls 1 7 Cutter Drive fig 15 Lever located on left hand side of seat Throttle Control Has symbols for Slow Fast and Choke fig 11 Ignition Switch Positions marked for Off On and Start The switch is key operated and automatically returns to the On position from Start position when released fig 11 Brake Clutch fig 12 Foot operated pedal on left side of machine Depressing the pedal disengages the drive belt and engages Brake Disc Parking Brake fig 12 Hand operated knob left hand side Dep
9. placed if the goods fail to be of acceptable quality and the failure does not amount to a major failure For New Zealand customers this warranty is in addition to statutory rights observed under New Zealand legislation This warranty does not cover e Commercial use e Normal wear and tear e Oiled air cleaner or starting difficulty caused by mower incorrectly tipped on its side e Consumable items including drive belts oil blades and spark plugs e Defects or faults caused by an act or omission after leaving manufacture e Incorrect contaminated or poor quality fuel older than 3 months or oil e Incorrect maintenance or storage of the product e Water damage or environmental conditions e Failure to observe safety requirements e Any loss or damage arising from faulty parts or workmanship e Transport costs to and from Authorised Sanli Dealer Sanli products are monitored and enhanced on an on going basis to comply with changing technical standards and requirements As a result Sanli reserves the right to alter design and specifications at any time without prior notice Contents SE 4 RideOn EE 5 Assembly iINStrUCHONS E 6 FENTON eae OST le e ensar aa An aa EENAA aE EE E E aA 7 Operating US I TE 9 E ern e 10 Technical specifications ET 10 amp 11 re ieren E 11 Contact Sanli AUStralia rarer aiaa LA ALANA a NANa EE ii 12 Safety Tips WARNING The information contained within this safety section is extremely important Person
10. ressing the brake clutch foot pedal enables this knob to be engaged and disengaged Parking brake is applied when the knob is locked in the up position by hand Drive Selector fig 13 Forward and backward movement of the mower is controlled by the drive selector pedal As with a motor vehicle speed is controlled by the amount of pressure on the drive selector pedal Ensure that the mower user is familiar with this type of movement before operating the ride on mower Fig 13 Cutting Height Adjuster fig 14 Located right of seat with low cut at bottom and high cut at the top setting mounting box Down position disengages blade drive and applies blade brake Up position engages blades 8 Sanli Ride On Mower User Guide Operating Instructions Warning All users must read and understand the following instructions before operating the ride on mower Starting the Engine Please note that the engine will not start unless the cutter drive is disengaged and the clutch brake pedal is depressed 1 Depress clutch brake pedal in order to apply the parking brake Ensure drive selector is in the neutral position Disengage the cutter drive 2 3 4 Move the throttle lever to the choke position 5 Turn the ignition key to the start position and release when the engine starts 6 Move the throttle lever to approx 1 4 position To Cut Grass or Drive 1 Depress clutch brake pedal 2 Disengage the parking brake 3 Select cuttin
Download Pdf Manuals
Related Search