User Guide
Contents
1. steam Mop Dirt sed Dirt be A wicked wa y to clean Get Cleaning What s your Dirt Devil s model number Distributed by Techtronic Industries Pty Ltd D D o o Level 1 660 Doncaster Road Doncaster Australia 3108 7 What s your serial number Located on the base of the machine dirtdevil com au Service Line AU 1300 361 505 NZ 0800 800 900 GILLETTE EEE EET Note these down in case you need them in future Please keep instructions for further use Dirt Devil Service line AU 1300 361 505 NZ 0800 800 900 Notes dirtdevil com au 14 ogoosogs Ergonomic Hand Grip Quick Release Upper Cord Wrap Power Cord Metal Pole Locking Metal Pin Lower Cord Wrap Pin Set Hole Lower Body Red Indicator Light Water Tank Cap roped Water Tank Viewing Window Eessdd Accessories 1 Microfiber Cleaning Pad Funnel Water Fill Cup Carpet Glider Resting Pad General Safety Information Other Information FOR HOUSE HOLD USE ONLY Do not add descaling aromatic alcoholic or detergent Dirt Devil Service amp Help When using the vacuum cleaner basic safety precautions products cleaning solutions scented perfumes should always be observed including the following oils or any other chemicals to the water used in this appliance as this may damage the unit or make it Dirt Devil Careline Turn off the st2. 1 Always make sure the Steam Mop is unplugged 2 Make sure the microfiber cleaning pad is properly attached to the mop head And install following the procedure described in the Before Using for the First Time section of this Instruction Manual 3 Turn the water tank cap counter clockwise to open Lift roped cap up and off the tank 4 Using the water fill cup and funnel pour one full cup into the water tank cold tap water is sufficient FN CAUTION Check the water tank viewing window to make sure i Max Line i DIA water level does not exceed the MAX fill line DO NOT OVERFILL 5 Replace the water tank cap Turn clockwise to tighten until tight 6 Once you have filled the water tank to the MAX fill line place the steam mop onto the carpet glider and resting mat provided This helps to protect the flooring surface whilst the map is heating up to the required temperature and also when the mop is not in use Never leave the steam mop in one spot on any surface for an extended period of time as this may damage the floor surface Place steam mop onto resting pad inside the carpet glider attachment MI al ntenance Keep your Dirt Devil as good as new Care amp cleaning 1 Always unplug and allow the Steam Mop to cool completely before cleaning or moving 2 Press the round black lock and pull it downwards to loosen the microfiber cleaning pad s drawstring 3 CAUTION Carefull
3. Steam will illuminate green Pump Switch 4 Press the steam pump switch to the ON I position After 30 seconds an audible hissing noise can be heard as the unit heats and steam production begins Steam will wet J microfiber cleaning pad 5 Tilt the ergonomic handle to a 45 degree angle and clean the oor area slowly For best results The cleaning pad should be changed when it gets too wet or if it is noticeably dirty 6 Pay attention to the water tank s viewing window to monitor remaining water steam As the water tank empties a special water sensor will cause the unit to work intermittently and eventually stop running in order to protect the pump inside the unit A vibrating sound may be heard and the green indicator light will turn red The pump will turn OFF Operation How to use on floors continued WARNING Never leave the Steam Mop in one spot on any surface for an extended period of time as this may damage the floor surface Always return the mop back to the resting pad when not in use or when not continuously moving across the floor 8 Press the steam pump switch to the OFF O position Unplug the Steam Mop 9 Refill the water tank using the water fill cup and funnel as previously described How To Use Return mop back to resting pad whilst refilling the water The indicator light will change to green Continue steam cleaning 10 When cleaning with the Steam Mop is
4. completed press the steam pump switch to OFF O Unplug the unit from the electrical outlet Allow mop to cool down 11 Carefully remove the microfiber cleaning pad from the Steam Mop head CAUTION Cleaning pad and mop head may be hot IMPORTANT Do not store unit with a damp or wet microfiber cleaning pad attached Operation How to use on carpets Your Steam Mop is designed to refresh carpets or rugs that will withstand high heat Be sure to check the Use and Care Instructions from the carpet manufacturer before steam cleaning WARNING The carpet glider accessory is for use on carpeting and rugs only Use of the carpet glider on other floor will cause streaking and possible scratching of the floor s surface IMPORTANT Never use the Steam Mop without the microfiber cleaning pad properly attached to the mop head IMPORTANT Check the water tank viewing window to be sure there is adequate water in the water tank For best results thoroughly vacuum the carpets or rugs prior to steam cleaning 1 Place the mop head with microfiber cleaning pad in place on top of the carpet glider 2 Do not attempt to use the Steam Mop on carpet rug surfaces without the carpet glider in place CAUTION Never use the carpet glider on surfaces that are prone to scratching CAUTION The Steam Mop emits steam and creates moisture If the Steam Mop operates too long in one place water marks can result
5. eam mop controls before unsafe for use While this Steam Mop is designed for disconnecting or connecting from the mains supply ap water to increase the effectiveness of the steam Australia 1300 361 505 Always unplug the steam mop before connecting or and to avoid build up of minerals you may use distilled New Zealand 0800 800 900 disconnecting the accessories water to fil the Steam Mop Do not use the Steam Mop in an enclosed space filled Monday Friday 8 30am to 5 00pm with vapour given off by oil base paint paint thinner some moth proofing substances flammable dust or A i i This appliance is not intended for use by persons other explosive or toxic vapours If you have queries or concerns about using your steam mop call the Dirt Devil Careline Calls ar including children with reduced physical sensory or Do not steam clean harmful or toxic material chlorine charged at the standard local rate Please make a note of the serial number and model number mental capabilities or lack of experience and bleach ammonia drain cleaner etc of the vacuum cleaner before calling nowledge unless they have been given supervision or instruction concerning use of the appliance by a Keep cleaning area well lit For the nearest Service Agent please call the Dirt Devil Customer Careline or visit dirtdevil com au person responsible for their safety Store the steam mop in a cool dry area Children should be supervised to ensure that t
6. hey do not play with the appliance Use only as described in this manual Use only Dirt i R Devil recommended attachments Tum off the on off switch before unplugging the steam mop Technical Specification Do not use the steam mop if it has been dropped damaged left outdoors or dropped into water Do not Symbol IEC 60417 5597 2002 10 is used on the unit Voltage 220 240V 50Hz use the steam mop with a damaged cord or plug to indicate danger of scalding A f the supply cord is damaged it must be replaced by Wattage 1500W the manufacturer its service agent or similarly qualified persons in order to avoid a hazard IN WARNING Danger of Scalding Water Capacity 300ml Do not pull or carry by cord Do not use the cord as a WARNING Always switch off and unplug the steam Variable steam 25g min handle close a door on the cord or pull cord around cleaner from the electrical outlet before assembling sharp edges or comers Do not run the steam mop over opening or emptying the water container or before Cord Length 6 2m the cord Keep the cord away from heated surfaces connecting disconnecting the attachments Do not handle the plug or steam mop with wet hands Heating Time 30 seconds Do not use outdoors or on wet surfaces CAUTION The steam cleaner is a very powerful Weight 1 9kg nit Bef lugging th rd into the electrical Do not put any objects into openings Do not use with ANE OE PL ge AE NS 4 i outlet make
7. leaning pads separately or place them in a garment bag IMPORTANT Wash microfiber cleaning pads regularly As with any fabric dirt particles can cause the fibers to break down Therefore regular cleaning will help preserve the cleaning efficiency of the microfiber cleaning pads As the microfiber cleaning pad is used sometimes a thread will loosen or pull out This is normal Never pull loose threads as this can cause the weave to come undone Simply trim any loose threads with a pair of sharp scissors How to use on floors IMPORTANT Never use the Steam Mop without the microfiber cleaning pad properly attached to the mop head IMPORTANT Check the water tank viewing window to ensure there is adequate water in the water tank IMPORTANT Do not put solutions or detergents into the water tank This machine operates with water amp steam only IMPORTANT This steam product may not be suitable for cleaning floating floorboards due to the moisture released when in use Please check with your floating floor board manufacturer first before using this product to avoid any damage or warranty issues with your flooring 1 For best results thoroughly sweep or vacuum floor s prior to cleaning with the Steam Mop 4 2 Twist the quick release upper cord wrap to either side and jo 9 unwrap the power cord completely 3 Plug the unit into a 240V AC electric outlet The indicator light
8. old use only Do not use the Steam Mop on leather wax polished and NOT for commercial or industrial use EH furniture or floors synthetic fabrics velvet or other delicate steam sensitive matenals ipl al aaa INSTRUC TONS FOR Waste electrical products should not be disposed of with household waste Please recycle wher Do not fill water tank under running water use only facilities exist Check with your Local Authority or retailer for recycling advice manufacturer s supplied fill cup AQ WARNING To reduce the risk of personal injury unplug the hard floor cleaner before performing maintenance troubleshooting checks Problem Reduced steam Possible Reason 1 Water tank is empty Possible Solution 1 Fill water tank Before using for the first time or no steam 2 AU 1900 361 505 NZ 0800 800 900 2 Steam pump not on 2 Turn on Steam Mop worked intermittently and Not enough water in the tank Fill water tank then stopped The indicator light is red Water tank is empty Fill water tank Cleaning pad is very wet and no longer picking up Cleaning pad is saturated Change pad dirt from the floor or carpet Steam mop left white spot Never leave the steam mop on the on floor Steam mop left in one spot too long 2 Hard Water floor with a damp or wet cleaning pad still attached when not in use 2 Use distilled water Don t take me back to the sh
9. op simply call us AU 1300 361 505 NZ 0800 800 900 dirtdevil com au p A wa y to clean This does not affect your statutory rights 1 Carefully unpack the Steam Mop 2 Remove all parts from the carton and familiarize yourself with all of the components listed Make sure all components and accessories are present before discarding packing materials 3 Attach the cleaning pad by fitting the mop head into the cleaning pad Tighten the cleaning pad by pressing the circular lock in one hand while pulling the black drawstring with the other When a tight fit is achieved release the lock to secure in place 8 J Assembly 4 N 1 The Steam Mop comes in 2 pieces ergonomic grip attach on the metal pole and the lower body 2 Toassemble the Steam Mop for first time use locate and line up the locking metal pin on the bottom of the metal pole with the pin set hole on the top of the lower body 3 Depress the metal pin to insert the metal pole into the lower body Push firmly until the locking pin pops up through the hole and locks into place NOTE The fit will be tight Operation How to use NOTE In hard water areas or to prevent calcium and Mineral deposits from accumulating on the heating element and mop head you may use distilled or demineralised water in place of tap water WARNING NEVER USE THE STEAM MOP WITHOUT THE MICROFIBER CLEANING PAD PROPERLY ATTACHED
10. sure the switch is in the off position any openings blocked and do not restrict air flow Hold the steam cleaner firmly when starting and eep all openings free of dust lint hair or anything that might reduce airflow nuse Subject to technical change without notice Keep hair loose clothing fingers and all parts of the IMPORTANT We recommend the use ofa body away from openings and moving parts IN Residual Current Device with a Residual Current 1 YEAR LIMITED WARRANTY ti f 3OmA or less Never use steam mop without micro fibre cloth attached EE SNARE ever direct liquid or steam towards people animals WARNING Never leave the steam mop in one plants or electrical components IN spot on any surface for an extended period of time as this may damage the floor surface Always return Do not place hands or feet under the Steam Mop 7 9 N197 jer i i mop back to the resting pad when not in use or p ER while it is in operation as the unit gets very hot and when not continuously moving across the floor per red may create a burn hazard Use only on flat horizontal surfaces Do not use the IMPORTANT This steam mop may not be suitable Steam Mop on walls counter tops or windows for all floating floorboards please check with your floorboard manufacturer first prior to use To protect against a risk of electric shock do not the st t te ther liquids NES IG SFAR OP I RIE Ay Ode This machine is intended for house h
11. y remove the cleaning pad from the mop head as mop pad and lower assembly may be hot 4 Any water remaining in the water tank should be emptied before storing the Steam Mop 5 Wipe all exterior surfaces of Steam Mop with a damp or dry soft cloth Storage 1 Never store the Steam Mop while it is still plugged in Remove the plug from the electrical outlet 2 Empty water from the water tank before storing 3 Twist the quick release upper cord wrap to face upwards Wrap cord for storage 4 Store upright in a protected dry area Keep water fill cup and funnel handy for future use General maintenance This appliance requires little maintenance It contains no user serviceable parts Do not try to repair it yourself Any servicing that requires disassembly other than cleaning must be performed by a qualified appliance repair technician Microfiber cleaning pads care amp cleaning To ensure long life and continued cleaning ability proper care of your microfiber cleaning pad is required Read and follow cleaning instructions 1 Microfiber cleaning pads can be machine washed in warm water with a mild detergent after each use or when dirty CAUTION Never use bleach or fabric softener IMPORTANT Only use liquid detergent or soap 2 Air dry pads for 24 hours NOTE Cleaning pads may be machine tumble dried on low heat 3 To avoid passing or picking up lint from the cleaning pads wash the microfiber c
Download Pdf Manuals
Related Search