e-STUDIO206L-256-306-356-456 Operating Instructions
Contents
1. g Select the desired paper size and then press AMS Place the original 9 5 Select other copy modes as required and then press the START button on the control 2 Sided Copying Ul Place paper in the drawer 9 Bi Place the original g Press 2 SIDED on the touch panel Select the desired mode 1 gt 2 DUPLEX 1 sided original to 2 sided copy 2 gt 2 DUPLEX 2 sided original to 2 sided copy 5 select other copy modes as required and then press the START button on the control panel Replacing the Toner WW Open the front cover and then hold down the lever to take off the toner cartridge a Shake the new toner cartridge well to loosen the toner inside Pull out the seal Then remove the seal on the toner cartridge board g Install the new toner cartridge Clean the charger Close the front cover2. TOSHIBA Leading Innovation gt gt gt svupi0 256 306 356 456 Operating Instructions Copying Mixed Sized Originals in One Operation Reduction Enlargement Registering Paper Size When YOU piae paper io the ust time or YOU replace a qa Place paper in the drawer s When original widths are the same When original widths are not the same ya Place paper in the drawer s the paper with that of a different size you need to DO B Adjust the side guides to the Press ZOOM on the touch panel register the size to this equipment ll Press the USER FUNCTIONS button on the control panel Press the USER tab on the touch panel to display the user setting menu and then press DRAWER Select the paper size on the touch panel 1 Select the drawer in which you placed paper 2 Select the paper size Press the USER FUNCTIONS or COPY button on the control panel The menu returns to the BASIC menu Making Copies i Make sure that paper placed in the drawer s Place the original on the Glass Face Down or RADF Face Up Key in the desired number of copies if you want more than one copy Select the copy modes as required Press the START button on the control panel If copying from the Glas
3. s place the next originals and then press the START button on the control panel ld Press FINISHED on the touch panel after all the originals have been scanned For Toshiba Service and Supplies call widest original and then align the originals against the side guide on the front side Press ZOOM on the touch panel Press MIXED SIZE H Press AMS to make copies on paper in one size To make copies on paper of the same size as the originals press CLOSE so that the menu returns to the BASIC menu and then press APS G Select other copy modes as required and then press the START button on the control panel Bypass Copying Ul Place the originals on the Glass Face Down or RADF Face Up Move the paper holding lever toward the outside Place paper with its copy side down on the bypass tray Align the side guides to the paper length while holding the tab Move the paper holding lever toward the equipment g Press the button of the same size as that of the paper you placed on the bypass tray ya Press PAPER TYPE on the touch panel if the paper type of the paper you placed on the bypass tray is other than plain paper G Select the paper type and then press OK ya Select other copy modes as required and then press the START button on the control panel
Download Pdf Manuals
Related Search