Bianco Rainsaver MK3 Installation and Operating Instructions
Contents
1. B rainsaver Bianco Rainsaver MK3 Installation and Operating Instructions addendum for DIVERTRON1200 OPTIONAL ENERGYSAVER J es 1 x 3 4 SOCKET BELOW GROUND WATER STORAGE Typical Installation The DIVERTRON1200 pump included with the RS3 DIVERTRON1200 package does not require the use of a float switch and is not supplied with one The DIVERTRON1200 pump utilises an internal electronic control which will operate the pump automatically as well as turning it off if it runs out of water It also incorporates an internal check valve If the pump runs out of water mains water will automatically be supplied The pump will also go through a series of restarts to look for water 1 hour later 5 hours later then every 24 hours During initial start up of the pump if the length of pipe between the pump and RainsaverMksS is long it may be necessary to turn off mains to the RainsaverMK3 and open a tap so that any trapped air is purged If there is no water pump will retry three times for 30 seconds then try again 1 hour later 5 hours later then every 24 hours If the pump has run continuously for one hour it will stop to determine if the internal check valve is operating correctly If the internal check vale is operating correctly it will restart and operate normally If the internal check valve is not operating correctly the pump will stay off and inspection and cleaning of the internal check valve is recommended Re2. setting the mains power to the pump resets the pump electronic control INSTRS 30709 add 1 05 03 2010
Download Pdf Manuals
Related Search