Operating instructions
Contents
1. The oil level in the tractor s hydraulic system is too low The oil filter is fouled The required oil quantity is not achieved The setting of the pressure limiting valve on the tractor is too low 5 Safety Before starting to use the appliances read through the associated operating instructions and follow their safety instructions without fail No one is permitted within a radius of at least 10 metres 11 yards of the appliances mounted on the column lifter during operation since all rotating or sluing tools constitute a hazard Before use the hydraulic lines must be examined for signs of damage and ageing and must be replaced if necessary Note the expiry dates printed on the hoses and possibly also on the screw couplings Important Splashing oil can cause injuries and endanger the environment Goggles must be worn without fail if there is any risk of earth stones or other objects being hurled aside during operation of the attachments Maintenance and repair work may only be undertaken when the hydraulic lines have been disconnected from the tractor Risk of crushing The column lifter and appliances must never being used by anyone who has not read the safety and operating instructions The accident prevention regulations of the employers liability insurance association must be observed Due to the noise generated when operating the appliances hearing protection must be worn without2. fail when working on a tractor with open driver s cab The column lifter and appliances may only be used during sufficient daylight in order to avoid the risk of accidents 6 Technical data Weight Dimension without appliances Stroke of the column lifter maximum approx 40 kg 881b without appliances LxWxH 320x 600 x 800 mm 12 6 x 23 6 x 31 5 400 mm 15 7 EC Declaration of Conformity in accordance with EC Directive 89 392 EEC Machines Annex II A Manufacturer CLEMENS amp Co GmbH Maschinenfabrik Rudolf Diesel Strasse 8 D 54516 Wittlich Mosel We herewith declare that the mechanical design of the Machine type Column lifter S 2 complies with the following relevant regulations Directives Directive on machines 89 392 EEC Official Journal of the EC No L 183 9 Amended by Directive 91 368 EEC 93 44 EEC 93 68 EEC The following harmonized standards have been applied DIN EN 292 Part 1 DIN EN 292 Part 2 The following national technical standards and specifications have been applied DIN v 8418 Particulars of the authorized signatory Surname first name Clemens Bernd Position Managing Director Wittlich 16 10 2000 Place date Legal signature 10 7 Spare parts list Customer Service address CLEMENS GmbH amp Co Phone 49 6571 929 220 Maschinenfabrik Fax 49 6571 929 192 Rudolf Diesel Strasse 8 D 54516 Witt
3. Operating instructions Column lifter S 2 for standard tractors Manufacturer CLEMENS GmbH amp Co Maschinenfabrik Rudolf Diesel Strasse 8 D 54516 Wittlich Mosel Serial No Contents Page 1 Foreword 3 2 Description of the column lifter S 2 5 3 Functional description and possibilities for installation 6 Before using for the first time 6 Possibilities for installation 6 Mounting appliances on the column lifter S 2 6 4 Maintenance and care 7 5 Safety 8 6 Technical data Column lifter S 2 9 Declaration of conformity 10 7 Spare parts list 11 Note The manufacturer cannot accept any liability for damage and losses due to non compliance with the Operating Instructions or to the use of impermissible spare parts The column lifter must not be modified extended or converted in any way capable of impairing its safety without the manufacturer s prior consent Subject to change without notice 2000 CLEMENS GmbH amp Co All rights reserved 1 Foreword Dear user The CLEMENS column lifter S 2 is a product from the range of All around weeders from CLEMENS which will make it very much easier for you to maintain your vineyard all around the vine So that the column lifter can be used safely and correctly for its intended purpose it is essential to read these Operating Instructions before using the product and scrupulously to follow all the instructions Ensure tha
4. ase detent couplings Mounting attachments on the column lifter Attachments are mounted on the column lifter by sliding the clamping bracket of the attachment over the clamping bar of the column lifter and clamping them together by means of the clamping device provided on the attachment The connection of the hydraulic hoses of the appliances is made in accordance with the attached hydraulic scheme by quick release detent couplings Please observe the operating instructions of the appliance 4 Maintenance and care The column lifter is designed to require minimum maintenance and care The following points must be noted however All screws and bolts must be checked after the first five hours of operation in order to ensure that they are secure When cleaning the column lifter with a high pressure cleaner and fitted attachments care must be taken to ensure that the high pressure jet is not directed towards bearings and seals or hydraulic connections as this could lead to damage and premature failure of the lifter After cleaning the guideways should be lightly greased with sulphur free grease This increases the service life of your column lifter The hydraulic fluid should be filtered at some point in the hydraulic system of the tractor Possible reasons for a major rise in oil temperature Nominal size of the intake delivery and return hose lines is too small The oil tank reservoir is too small
5. lich See figure 2 Item No Quantity Description Order No 1 1 Column CL 866 3010 00 2 1 Sliding tube CL 866 3020 00 3 1 Clamping bar CL 866 3030 00 4 1 Hydraulic hose CA 845 3620 00 5 1 Hydraulic cylinder single acting CL 895 2700 00 2 Bolt CW003 0113 00 7 4 Hex screw M16 x 50 0931 16 050 8 2 Washer D 20 1440 20 9 4 Hex nut M 16 0934 16 10 1 Spring pin D 4 CW520 0004 00 11 4 Washer D 16 CW520 0031 00 12 2 Conical lubricating nipple SFG 8 x 1 CW570 0001 00 13 2 Hex screw M12 x 100 0931 12 100 14 2 Hex nut M 12 0985 12 15 1 Locking pin D 4 5 x 32 CW520 0005 00 16 1 Threaded coupling P GV 12L CW730 0098 00 11 Figure 2 Item No 15 not displayed 7 9 11 15 16 12 6 13 14
6. ng bracket which the dealer can then install on your tractor The installation of the mounting bracket can be one sided as well as double sided The underlying principle of the column lifter is that a single acting hydraulic cylinder raises or lowers your attachment when the hydraulic control is actuated from the driver s seat The hydraulic cylinder has a maximum stroke length of 400 mm 15 7 The column lifter is also optionally available with a double acting hydraulic cylinder 3 Functional description and possibilities for installation Before using for the first time Read the Operating Instructions through carefully and ensure that you are familiar with the mode of operation of the column lifter and attachments Check that the hydraulic connections of the column lifter match those on your tractor Possibilities for installation The column lifter S 2 is secured to the square block on the mounting bracket of your tractor by means of four clamping screws If your tractor does not include a mounting bracket contact your dealer to obtain a suitable mounting bracket which the dealer can then install on your tractor In order to install the column lifter it can be raised with the aid of a hoist e g chain hoist and mounted on the tractor It can be suspended from the crane lug at the top of the column lifter The column lifter S 2 is connected to the hydraulic system of the tractor by means of quick rele
7. t you are familiar with the principle of operation of the column lifter and other fitted attachments before starting work General note The column lifter may only be operated when all guards and safety mechanisms are in place and functioning correctly All faults and malfunctions capable of impairing safety must be remedied immediately by specialist personnel The column lifter may only be used to lift out tillage implements mid mounted on the tractor The hydraulic connections of the column lifter must not be modified as this will lead to malfunctions and endanger both yourself and other people Repairs should only be carried out by specialist repair shops or the CLEMENS Customer Service Centre Never undertake any unauthorized modifications on the device The instructions supplied with the attachments must also be read with care Figure 1 Column lifter S 2 Column Sliding tube Lifting cylinder Hydraulic hoses Quick release detent couplings Clamping bar 2 Description of the column lifter S 2 See fig 1 The CLEMENS column lifter S 2 essentially comprises the following components Column Sliding tube Lifting cylinder with hydraulic hoses Clamping bar The column lifter is secured to the square block on the mounting bracket of your tractor by means of four clamping screws If your tractor does not include a mounting bracket contact your dealer to obtain a suitable mounti
Download Pdf Manuals
Related Search