Dear customer Limits Operating Instructions Product
Contents
1. A alkaline batteries The manufacturer warrants for 3 years of the product to be free from defects in Weight 105g including batteries workmanship or material excluding re calibration in normal service from the date of purchase Manufacturer s obligation under this warranty is limited to replacing adjusting or repairing the unit if returned along with proof of purchase This warranty is void if the unit has been tampered with damaged or abused in any way Dimensions mm 137 high x 73 wide x 44 deep Calibration Recommended every 6 months or 200 tests Test will be quicker and more convenient for mass testing but results will be given TEC Tatgeetre her There E Allow at least 20 minutes after eating or drinking before testing Any type of Register online at www alcosense com au warranty to Now if you are drinking you are more aware of your alcohol level before you get alcohol remaining in the mouth of saliva may interfere with proper testing and into nie and seen drie dangerously ee Step 1 Press and hold the Power Switch requires about 20 minutes to disperse This includes alcohol based mouthwash or receive calibration reminders Alternately complete this or e similar products form and forward to We hope you enjoy owning your AlcoSense Pro breathalyser If you have any Step GH ICI o ee IME ROWED SWE WHEN diSpiaying ESE ana Watie tne tnit Avoid testing in high wind conditions or in poorly vent2. ilated or enclosed spaces questions regarding the unit or want to speak with us further please visit counts down from 234 to warmup Poor ventilation may also lengthen the time required for warm up between tests Andatech Corporation Pty Ltd alcosense com au or call 1300 800 200 between 9am and 5pm Monday to Friday Step 3 The unit will beep twice and display F5r to indicate fast mode operation Do not blow smoke saliva or other contaminants into the mouthpiece as the PO Box 3038 Nunawading VIC 3131 Australia Yours sincerely and it is ready for you to start sensor may become damaged Wait at least 20 minutes after smoking before AlcoSense Step 4 Begin blowing into the unit for at about 1 2 seconds until the unit beeps l a a breathalyser as a tool to drink and drive Product AlcoSense Pro twice You will see the unit displaying digit G moving left to right as it is Do not blow fluid into the instrument as it will damage the sensor and void your Operating Instructions aie eM INE SAMPLE warranty After analysis is complete you will see the 0 00 to 0 01 Do not en in hide al elle where high temperature or high humidity A exists Keep out of the reach of children blood alcohol concemratnan BAC ranges 0 02 to 0 04 To maintain accuracy we recommend professional recalibration every 6 months Place of purchase results displayed The result will be displayed a Blood alcohol concentration can continue to rise for up to 2 hours after
3. imits S AUSTRALIAN BLOOD ALCOHOL LIMITS Adult License 0 05 A e i S e Some drivers are restricted to lower levels of BAC Please refer to your local transport authority for your correct limit If in any doubt do not drink and drive The safest level when driving is none at all Alcohol impairs your judgement and can make Breath out you drowsy or sleepy do not cover with BAC Mouthpiece hand during sampling READY WARN BATT LOW Disclaimer Professional Breathalyser Dispiay Window PLEASE NOTE This product must be used in accordance with the instructions in this manual and in particular must not be allowed to get wet On Off This product is intended to provide the user with an indication of alcohol on the breath Power Switch However neither the manufacturer nor the supplier gives any warranty express or implied that the product can give any indication of blood alcohol level Aperson s BAC Blood Alcohol Concentration can only be accurately measured by the Hand Strap andatech administration of a blood test This product only measures breath alcohol content which in turn only gives an approximately indication of blood alcohol concentration In these circumstances the user of this product should not rely on the information provided thereby as an accurate indication of his blood alcohol concentration or of his level of intoxication or of his fitness to drive and in particular should not take any action in
4. llowed to ensure accurate test results This unit can be operated in Active Mode and Passive Mode as described below Surname Step 1 Wait 20 minutes after your last alcohol drink It takes approx 20 minutes for alcohol to have an effect on your system and for residual alcohol remaining in mouth to dissipate WHEN For personal use the mouthpieces are reusable if cleaned properly For Step 3 Release the Power Switch when displaying nar and wait while the Pro counts down from 234 to warms up Step 4 The unit will beep twice and a yellow light will appear beside READY to indicate it is ready for you to start Begin blowing through the mouthpiece into the unit for at about 5 seconds until the unit beeps twice Step 5 After analysis is complete you will see the blood alcohol concentration BAC results displayed The result will be displayed for 15 seconds along with the alarm sound
5. reliance on such information as the product can provide no more than an Indication of alcohol on Specifications the breath 5 If the user of this product makes any decision or takes any action based on the use of the product such decision or such action shall be at the sole risk of the user and neither the manufacturer nor the supplier assumes any responsibility for such decision or action In particular neither the manufacturer nor the supplier shall be in any way liable if the user Accuracy 0 01 at 0 05 BAC of the product asserts that the product led him to believe that he was fit to operate a motor Warm up Time Within 80 seconds vehicle and is subsequently found not to be so fit Within 3 5 seconds This product is certified pursuant to Australian Standard AS 3547 as a type 2 hand held Recycle Time 10 seconds ae Australian Mouthpiece 5 mouthpieces supplied hee Sensor Type Semiconductor sensor Ready Lamp Alcohol Level Warning Lamp Battery Low Lamp Contents Breathalyser mouthpieces x5 AA batteries x2 hand strap and user s manual eljesisny LELE OIA Bulpemeuny 8E0 X09 Od p37 Aid uoljesodioy yda epuy 0 pJEMJOJ pue w0 Siy 3 9 dWIOD 10 AyuesieM ne wos asuasoz e MMM je UNUO 41a sibay uonetsibay Npoid 0 00 to 0 40 BAC normal mode Indication of BAC zero low and high fast mode Certified Product Response Time Warranty Ti Power Supply 2 x A
6. s bottom of the unit and replace the old batteries with two new 1 5V AA batteries Make analysing the sample The Pro uses a sensor to measure blood alcohol levels Depending upon the amount of sure to properly align the batteries by looking at the marks alcohol registered by the sensor after a period of time it will require re calibration If the User serviceable batteries safety Pro is for personal use the manufacturer recommends this is done every 6 months of up Do not dispose of batteries in a fire to 200 uses although it may be required more or less frequently depending upon the Do not recharge a battery unless it is specifically marked rechargeable before automatically turning off amount of alcohol registered by the sensor If the Pro is not calibrated the unit will start to Do not expose the AlcoSense Pro or batteries to heat source l eee lj pad Limit the WARN light will flick produce significantly higher results than expected For recalibration and technical support Do not mix old and new batteries or mix different types or makes of batteries A coS en se andatech Once your blood alcohol level is above the legal limit the WA ight will flicker please contact us at 1300 800 200 or visit www alcosense com au Do not allow children to play with the batteries Congratulations on buying your new AlcoSense Pro breathalyser Date of purchase Instructions must be fo
7. the cessation Normal Mode Operation for 1 second before it is ready for another test OO ANET of drinking If a caution result or a result is close to the designated BAC it is recommended to wait and retest after 20 minutes How to clean breathalyser mouthpieces i It can take 10 hours or more for the alcohol level to return to a zero after a high blood alcohol level has been reached A further test should be carried out later in the day of the following morning Step 2 Press and hold the Power Switch hygiene reasons replacement is recommended after every 3 months of j WARNING DISPLAY FLO If you see F io in the display the breath sample was use To reorder contact your retailer or call us on 1300 800 200 not strong enough for measurement Please power up the unit again and make sure 1 Remove the mouthpiece from breathalyser MNO Braats athena ahiasteady during Sempung 2 Put the mouthpiece in boiling water for 2 minutes WARNING DISPLAY CAL If you see g inthe display the unit requires a i recalibration or maintenance Please head to www alcosense com au calibrate to 3 Wipe thoroughly and dry the mouthpiece before use book it in or call 1300 800 200 WARNING DISPLAY BAT If you see hg in the display the unit is indicating that s battery power is low Please replace the batteries Remove the battery cover at the Recalibration amp Service E r You will see the unit displaying the digit moving left to right as it i
Download Pdf Manuals
Related Search