Home

USER MANUAL

1. Front Longer a E 7 E Input Sources 2 E While installing the stand please make sure that the 5 screws are fixed tightly CAUTION If the screws are loose the TV may 5 become unstable and fall over easily 3 a HE 9 0 Warning for the stand 9 The TV screen cannot be tilted forward or B The maximum possible swivel angle for the TV screen is 22 P backward like the picture below as the as shown in the picture 2 stand leg will be damaged and cause the CAUTION Forcing the screen to turn more than the maximum TV to become unstable angle will cause the stand to break Top View Digital Video Recording DVR USB Multimedia Playback Reference 2 TV PLACEMENT SETUP Fall Prevention To prevent the TV from tilting forward and falling over to cause damage or injury please secure the TV to your table or wall using screws or eyebolts and strong cord not provided An example on fixing the TV to a table is shown below 1 Install a wood screw or eyebolt into the table that is supporting the TV 2 Fix a machine screw into a screw hole near the base in the back of the TV 3 Tie the wood screw or eyebolt to the machine screw with a strong cord TET LI Parts amp Connections Alternatively secure the TV to t
2. Digital Video Le x 2 H 5 O a USB Multimedia Playback Reference 1 SAFETY PRECAUTIONS 1 2 Installation BELA DO NOT place containers with DO NOT place the unit where DO NOT use or store flammable DO NOT place the unit on an unstable liquids such as vases drink cans _ it is exposed to rain excessive combustible materials near surface such as a sloped table or any bottles or small metallic objects moisture or grease the unit Stand with a contact area smaller than on top of the unit l _ the bottom surface of the unit stand Doing so may result in fire Doing so may result in fire If liquid enters the unit or any electric shock malfunction jor explosion Placing the unit on a flat stable surface metal object falls into the unit it or deformation can prevent accidents from happening may result in a shortcircuit fire Ignoring this precaution may result in the or electric shock unit toppling over and causing injury s 44 2 d DO NOT place a burning candle DO NOT place the unit in a poorly DO NOT run power cords near Install the antenna away from 8 burning incense or lighted ventilated enclosure such as a heat producing appliances such high voltage power lines and cigarette on top of the unit cabinet as radiators stoves or i
3. Connect the eyebolts and the wall bracket securely with strong rope Carefully check that all fastenings are secure before releasing the TV 0 N ARSENA O 400mm 400mm 400mm Thread hole size M6 x 12mm depth TV Mounting Screw Size on the TV 3 PARTS amp CONNECTIONS 3 1 Front View 9 9 9 Quo LED Indicator Remote control window keep clear INPUT Display the input source menu MENU Display exit the OSD menu CH Scan through channels VOL Adjust the volume POWER Turn on standby the TV set 3 PARTS amp CONNECTIONS 3 2 Back View 2 2 Oc i s i NIC 7 O i SWITCH 1 4 P AC POWER IN Em eo I 5 HDMI1 T Initial Setup amp Power Switch Turn on off the power supply AC Connect to the AC power supply E HDMI 1 2 3 Connect to the HDMI socket of your DVD or satellite box YPbPr Connect to the component YPbPr output of external devices E PC IN PC audio input VGA Connect to the PC VGA output to display PC graphics E Connect to antenna or cable source 5 Digital output AV receiver E x USB Connect to a USB storage device for DVR Recording in DIV Mode and E USB Multimedia Playback in USB Mode V
4. ERIT 3 Press O to return to TV viewing Deleting a Scheduled Recording Viewing Event 1 While viewing the Schedule List use 4 to select the event to be deleted DELETE 2 Press to delete the highlighted event 3 Press 4 to confirm or to cancel the deletion 8 5 Using the Recorded File List Press C to access the Recorded File List Any recorded TV programmes will be listed if a USB storage device is connected and powered on Viewing and Playing Recorded Files REC LIGT 1 Press to view the Recorded File List Press repeatedly to sort the files by Programme Channel and Time 2 Use to browse the list and select a file C 3 Press _ to display detailed information on the highlighted file 4 Press to show an on screen control bar 5 Press to start playing the selected file D NOTE f playback is stopped the track position is remembered and playback will resume from there When Parental Control is enabled some recorded programmes may be locked because of their rating according to the EPG Key in the correct password to play them Deleting Recorded Files REC LIST 1 Press Ge to view the Recorded File List then use to select a file 2 Press C to delete a file Digital Video Recording DVR 5 T ES gt T m 2 Reference 25 Playback o 9 gt ta Reference 9 USB MULTIMEDIA PLAYBACK USB Usa
5. TEAC LE4618FHD EDGE LIT LED LCD TV USER MANUAL IMPORTANT WARRANTY INFORMATION INSIDE PLEASE READ TEAC WARRANTY PROCEDURE v1 5 2 DEC 2011 Please read the owner s manual carefully and ensure that you have followed the correct installation and operating procedures 1 Please read this warranty card 2 Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service 3 If you require Warranty Service please contact the TEAC Customer Support Hotline at 1300 553 315 for assistance Please ensure that you have the model number serial number and purchase receipt ready when you call Please complete the section below and keep this information for your own records Owner s Name Owner s Address Postcode Model Name No Serial No Dealer s Name Dealer s Address Postcode Authorised Service Centres in Major Australian Cities NSW Queensland Western Australia 151 Arthur Street Unit 1 320 Curtin Ave West Unit 2 50 Pilbara Street Homebush West NSW 2140 Eagle Farm QLD 4009 Welshpool WA 6106 South Australia Victoria 11 Mcinnes Street 282 Normanby Road Ridleyton SA 5008 South Melbourne VIC 3205 Thank you for selecting a TEAC product If you should require assistance with your product regarding its setup or operation or if any difficulties arise please call us directly for advice between Monday to Friday at 8 30AM 6PM AEST at the TEAC Customer Support Hot
6. 11 5 REMOTE CONTROL DTV USB INPUT AUDIO MUTE PICTURE SOUND SLEEP ASPECT Buttons for USB operation e REC Press to start recordingthe program in DTV mode No function B Stop program 4 Previous chapter e Next chapter gt Il Play Pause program 44 Fast reverse gt gt Fast forward MENU EXIT Buttons for TELETEXT operating Teletext is an information system broadcasted by certain channels which can be consulted for news weather forecasts puzzles etc and also offers subtitles for viewers with hearing problems or who are not familiar with the transmitted language Subject to availability DISPLAY TV TXT Turn off on the Teletext display CANCEL Cancel the Teletext display REVEAL Reveal any hidden text HOLD Hold or carry on the current subpage SIZE Press to see top half of page double size Press again to see the bottom l DSETUP DMENU half of page double size Press again for normal size SUBPAGE Press to subpage again to cancel INDEX Go to index SCH LIST Display the programs list Colour buttons Short cuts follow the coloured links in the text TVITXT CANCEL REVEAL REPEAT HOLD SIZE SUBPAGE INDEX DELETE RECLIST SCH LIST SCREEN Remote Control On Screen Display OSD Menu 98 e 5 go 59 9 TE 5 toy 5 5 2 Battery Installation N CAUTION To prevent damage to the remote control make
7. Mode PROGRAMME GUIDE 20 15 01 11 07 Dec 2008 information 07 Dec 2008 17 37 48 Ram TV 12 00 19 30 No information Remind Day Nart Day j d ic Mova View pen Dat alla 2 Exi Browsing the EPG 1 2 3 4 Change channels using to navigate and press to tune into a highlighted channel View channel guides when tuned in to the relevant channels by using 4 gt SCH LIST SCREEN Browse channel schedules up to 7 days in advance with D Press MENU or 2 to exit EPG D NOTE You need to tune in to a channel before its schedule is displayed EPG schedules are available up to 7 days in advance from the broadcaster DELETE While a future programme is highlighted press to schedule automatic timed REC LIST recording or press C 2 to schedule a viewing Please see the DVR section for detailed instructions 7 3 Channel Customisation Make personal changes to the channel list in the Channel Edit menu Different options are available for ATV and DTV channels Press MENU to display the OSD Use v to navigate to CHANNEL Menu Channel Edit and press If password locks are enabled key the password to enter the Channel Edit menu Customise your channels according to the instructions below Press MENU again to exit the menu or Q to exit the OSD completely 17 TV amp Electronic Programme Guide c gt uod 1
8. ON NRY 10 REFERENCE 10 1 Troubleshooting Please do not use functions not mentioned in this user manual If a problem occurs with your TV please refer to the table below If the problem persists please turn the TV off and consult the TEAC Customer Service Hotline in No picture Is the power plugged in Connect the power plug securely Like your computer the TV runs diagnostic and software checks before it can display broadcast channels The picture should appear in approximately 15 seconds Picture is too bright or too dark Adjust picture brightness or contrast settings Picture is too large or too small Adjust the aspect settings Picture shakes and stripes Keep appliances that emit magnetic radiation away from the appear TV Press the PAUSE button Check if playback is on Pause Picture does not move E any connected external equipment Check if the MUTE function is on Adjust the volume level Check the connection of the audio input cables Check all other input connections The picture appears too slowly after the power is turned on Has picture but no sound Check if the AC power connection is switched on Check that the battery installation is correct Remote control does not work Remove any obstacles between the TV and the remote control If the batteries are flat replace them with new ones Video compression may cause distortion especially in scenes Distorted picture with fast action We
9. Available data storage space for Time Shift recording USB Speed Shows the speed of the selected USB storage device Picture Mode Choose from preset picture settings profiles Choose User for manual customisation Contrast Adjust picture contrast Brightness Adjust picture brightness Colour Adjust picture colour Tint Adjust picture tint NTSC format only Sharpness Adjust picture sharpness Colour Temperature Adjust colour temperature 8 Red Adjust Red colour level as Green Adjust Green colour level E Blue Adjust Blue colour level E Aspect Ratio Adjust picture aspect ratio Noise Reduction Adjust noise reduction settings Over Scan HDMI Mode Choose between Auto Video and PC TV amp Electronic Programme Guide c 9 gt va fey 5 5 6 9 USB Multimedia Playback Reference 14 6 ON SCREEN DISPLAY OSD MENU OPTION LOCK TIME SOUND Sound Mode Treble Bass Balance Auto Volume Surround Sound SPDIF Mode Clock Off Time On Time Time Zone Sleep Timer Auto Sleep Enable Locks Set Password Block Channel Parental Guidance OSD Language Audio Language Subtitle Language OSD Duration Blue Screen Country Auto Software Update Restore Factory Default Backlight oystem Info HDMI CEC HDMI Choose from preset sound setting profiles Choose User for manual customisation of Treble and Bass Adjust the relative intensity of
10. PRODUCT WARRANTY PERIOD LED LCD TV 32 80 cm and above 1 Year In Home Service Pick up Available All other TEAC products 1 Year Carry in Service 5 In Home Service Pick up Service This service will only be provided as part of this warranty if all the following conditions are met a The product is indicated in the Warranty Period Table b The product is within the warranty period C The product is located within the normal service area of the local TEAC Authorised Service Centre If TEAC determines that the product is not repairable on site TEAC can complete the repair by taking the product to a TEAC Authorised Service Centre Carry in Service Where In Home service Pick up is not available the purchaser is required to send the product to the nearest TEAC Authorised Service Centre for repair In this event proof of purchase is required to support a warranty claim After the repair the product will be available for collection by or return to the purchaser at a fee upon request TEAC in home service can be made available at a fee upon request 6 A 12 month replacement warranty is applicable to all Accessories such as Remote Power Adaptors and Cables f TEAC will ensure to the best of its abilities that all required parts are made available for any required service repair 8 TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product repairs within a reasonable period based
11. battery consumable AC cord connecting cord and other accessories are warranted as specified in Warranty Periods Table and will be repaired or replaced at the sole judgement of TEAC The warranties hereby conferred do not extend to and exclude any cost associated with the installation deinstallationor re installation of a product be it in home or otherwise including costs related to the foe rrt 44 gt gt Previous next Page Previous next text document B Stop viewing the text document Char Set Select a switable character libraly of corront Text file that you view such as Western Europe Windows 29 E 5 9 ta 5 Reference Playback Playback fe 5 9 gt m Reference 9 USB MULTIMEDIA PLAYBACK Movie Playback In the USB Menu choose Movie Playback with 4 and press Add movie files to a playlist by following on screen hints for button controls CANCEL 1 2 3 Press D to start playback Press E to see the Movie Playback control bar 4 Press and to use the buttons the bar LI ee E TE a aF Eri PERTEN i i3 SS Ss TOM 00 00 25 00 0100 pied e Es E Bing dui NOTE f playback is stopped the track position is remembered and playback will resume from there Char Set Select a switable character libraly of the subtitle of the movie that you view such as Western E
12. higher pitched sounds Adjust the relative intensity of power pitched sounds Adjust the balance of the Left and Right audio tracks Turn on off automatic programme volume control Turn Surround Sound off on Select between Off PCM and Auto Set the current time In DTV Mode the time is set according to broadcaster signals and cannot be changed Set a time of day and frequency for the TV to turn off Set a time of day and frequency for the TV to turn on Select the time zone Set the TV to turn off after a certain amount of time oet the TV to turn off after it has not received any control signals for a certain amount of time Set channel programme locking on off with a password Change the password Password lock all programmes from selected TV channels Password lock all programmes at and beyond a chosen programme rating oet the language for the OSD Menus Select the 1 2 preferred language track to be selected if it is available from the broadcaster Select the 1 2 preferred language track to be selected if it is available from the broadcaster Adjust the time needed before the OSD Menu auto hides Turn on off the blue screen display during No Signal Shows current country that was set during Auto Tuning Turn automatic software update on if you wish the TV to automatically scan for new firmware updates at night Reset all settings to factory defaults All channels and personalis
13. remove a highlighted file from the list or REC LIST ERIT to remove all files Press 2 to return to the control panel SCREEN Screen Mute Press to turn off the screen while continuing to play music Text Display 1 In the USB Menu choose Text Playback with 4 and press 2 Add text files txt to a playlist by following on screen hints for button controls CANCEL 3 Press CID to display text files in full screen Press 4 and to use the Text Playback control bar Where In Home service Pick up is not available the purchaser is required to send the product to the nearest TEAC Authorised Service Centre for repair In this event a copy of this warranty card and a copy of your receipt of purchase must be enclosed to be a valid warranty Such equipment or part must be sent freight prepaid to your nearest TEAC Authorised Service Centre After the repair the product will be available for collection by or return to the purchaser at purchaser s cost The warranty does not cover freight or insurance In all cases of transit damage or lost a claim must be filed against the carrier by the purchaser even if shipment is arranged by TEAC TEAC inhome service may also be available at a fee upon request Accessories Remote including power adaptors AV box TV tuners etc are warranted to be defect free for 1 year Replacement of spare parts under normal usage except cabinet front panel knob removable accessories
14. ECAUTIONS 1 4 Important safety Instructions Warnings and Precautions To prevent any injuries the following safety precautions should be observed in the installation use servicing and maintenance of this device Please read this manual carefully and keep it for future reference OPI I it N 10 11 12 13 Read these instructions Keep these instructions Heed all warnings Follow all instructions Clean only with a dry cloth Do not block any of the ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other devices including amplifiers that produce heat Do not defeat the purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your power outlet consult an electrician to replace the power socket Do not bend the power cord excessively Prevent the cord from being walked on or pinched by weights placed on it Only use the attachments accessories specified by the manufacturer Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the device When a cart is used use caution when moving the cart and device Unplug this apparatus during light
15. V 50 60Hz 150W 0 5W PAL BG DK I SECAM BG DK L L 48 25 863 25 MHz 2x8W 75 ohm DVR Recording FAT32 USB Multimedia Playback FAT32 and NTFS Maximum hard disk partition size 400GB USB2 0 See the table on next page WUXGA Maximum supported resolution 1920x1080 60Hz 1057x255x673 mm 1057x37x616 mm 14kg 400x400mm M6X12 0 40 C e Specifications are subject to change without notice Weight and dimensions are approximate 10 REFERENCE Supported File Formats USB Mode using USB 1 MOVIE Max bitrate 6Mbps AVI Max resolution 1920x1080pixels PICTURE Mono colour 16 colour 256 colour 16 bit 24 bit 32 bit Max resolution 3000 x 3000 pixels Min resolution 100 x 100 pixels Sample rate 8K 48K Bitrate 32K 320K Special Notes The Media Unit can only support USB memory devices such as hard disk drives and flash drives and will not support multimedia devices such as mobile phones and cameras for recording purposes The unit will only support hard disk drives with additional power supply a maximum disk partition size of 400GB and a maximum capacity of 1 5TB For best performance we highly recommend that a hard disk drive with an external power supply be used for larger capacities The maximum number of files that each folder can use is 5000 files When using external USB it is suggested that high quality of USB extension cables supported 480mHz be used to ensure smoo
16. a 5 D 6 9 USB Multimedia Playback Reference TV amp Electronic Programme Guide Digital Video Recording DVR me i Es 2 E m 72 Reference 7 TV amp ELECTRONIC PROGRAMME GUIDE EPG Favourite Channels 1 Use v to highlight a desired channel 2 Press CH FAV to mark it as a Favourite Channel This channel will now be listed in the Favourite Channel List 3 To remove it from the list press CH FAV again to remove the Favourite mark Skip Channels 1 Use a dn B to highlight a desired channel 2 Press C to mark it to be skipped This channel will now be skipped when you browse TV channels with CH 4 v It will still be accessible from the Channel List and EPG 3 To remove the channel s Skip status press C 2 again to remove the Skip mark Delete Channels 1 Use gt to highlight a desired channel ELET 2 Press C to delete it 3 Press to confirm or to cancel the deletion D NOTE To add a deleted channel into the list again you will have to scan for it via Auto or Manual Tuning See the Tuning section for detailed instructions Rename Channels This feature is only available for ATV channels DTV channels cannot be deleted 1 Use v to highlight a desired channel REC LIST 2 Press C 2 to start renaming and use 4 gt to enter the new channel name Move Channels 1 Use v to highlight a desired channe
17. ak reception may cause distortion and is not a TV issue please have the antenna assessed Check the connection to the USB device Please ensure that the device is compatible and the multimedia data formats are supported for details see the Specifications section TV turns off by itself 2 the Timer Sleep and Auto Sleep settings the TIME The TV may have been set to scan for new firmware at night TV turns on by itself at night Please check the Auto Software Update setting in the OPTION Menu USB device not detected Ensure that you are in Blu ray Mode when loading and playing discs Check that the discs are loaded correctly Disc cannot be played Ensure that the disc type content and region code if applicable for BDs and DVDs is compatible Ensure that the disc is clean and in good condition Ensure that the network connection is set up correctly and working For connection issues consult your local IT technician Cannot access BD Live feature Ensure that there is enough data space in your connected USB storage device if you wish to download content from BD Live Check that the BD disc supports the BD Live feature Q S Q Y a 31 S is a 10 REFERENCE 10 2 Specifications 1920x1080 Input Connector AUDIO L R PC AUDIO 3 The HDMI support 1 3 the HDCP support 1 1 RF Output Connector HEADPHONE 100 240
18. ave entered a submenu please follow the hints at the bottom of the screen or refer to the relevant sections in this user manual for operation details ur NU n On Screen Display OSD Menu 6 Press MENU again to exit the menu or Q to exit the OSD completely 6 2 Menu Map TV amp Electronic Programme Guide OSD Menu 2 9 gt 3 gt ST Ey OW 0 44 USB Multimedia Playback Reference 13 6 ON SCREEN DISPLAY OSD MENU Menu Option Auto Tuning Tune channels automatically This will overwrite any previously saved channels and channel settings DTV Manual Tuning Tune digital TV channels manually ATV Manual Tuning Tune analogue channels manually Channel Edit Customize channel list display and channel access Signal Information Display detailed channel signal information Record Start otart recording the current DTV channel at once Recorded List Display the Recorded File List E Record Mode schedule a future recording 2 Schedule List Display the Schedule List 5 Free Record Limit oet a recording time limit between 1 6 hours DVR File System Access the DVR File System Menu Select Disk oelect a connected USB storage device Check DVR File Check if the selected USB storage device is compatible System USB Disk Show if the selected USB storage device is compatible Format Format the selected USB storage device Time Shift Size
19. battery seek medical attention immediately Do not display still images and partially still images on the LED panel for more than 2 hours as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention reduce the degree of brightness and contrast of the screen when displaying a still image Watching the LED TV in 4 3 format for a long period of time may leave traces of borders displayed on the left right and centre of the screen caused by the difference of light emission on the screen Playing a DVD or a game console may cause a similar effect to the screen Damages caused by the above effect are not covered by the Warranty Displaying still images from Video games and PC for longer than a certain period of time may produce partial after images To prevent this effect reduce the brightness and contrast when displaying still images Initial Setup amp Remote Control Input Sources arts amp Connections On Screen Display USB Multimedia Digital Video TV amp Electronic Reference OSD Menu E 5 Recording DVR Playback Initial Setup amp Input Sources Remote Control gt xy p S 9 v S le i S b d 5 9 gt j Digital Video USB Multimedia Reference Programme Guide OSD Menu Recording DVR Playback 1 SAFETY PR
20. connected external device change input sources to activate the desired connection Initial Setup amp Input Sources 1 Press INPUT to display the list of input sources 2 Press bd to choose an input source 3 Press 0 to confirm DTV USB and HDMI can also be accessed using the shortcut buttons DVB USB Remote Control This TV starts in DTV mode by default when it is switched i on for the first time Subsequently it will start in the most recently selected input mode TMove On Screen Display OSD Menu D NOTE Please make sure the device is connected before selecting the input source os e 5 go o 9 TE S te RS a Digital Video Recording DVR Playback USB Multimedia Reference 10 5 REMOTE CONTROL The remote control uses Infrared signals Point it at the Infrared sensor at the front of the TV D NOTE The remote control may not work correctly if it is operated out of range or angle of if there are objects blocking the signal 5 1 Remote Control Buttons and Functions b POWER Turn the TV on back to Standby mode DIV USB INPUT AUDIO MUTE DTV USB Switch to DTV USB INPUT Display the input source menu AUDIO Select different audio languages subject to availability from broadcaster MUTE Press to mute the sound press again or press VOL to unmute PICTURE Press repeatedly to cycle through the available video picture modes SOUND Press to cycl
21. cording and return to live TV broadcast NOTE HOLD SIZE Fast Forward Rewind can be done with 44 gt but if you reach the end of the Time Shift recording the TV will stop recording and return to the live TV broadcast 23 Digital Video Recording me es Es 2 m 72 Reference Digital Video Recording DVR xe T m 72 Reference 8 DIGITAL VIDEO RECORDING DVR The max recording time for Time Shift depends on the available data storage space and the size of the broadcast DTV content Time Shift recordings do not remain saved on the USB storage device The name and number The current state of the program of the program The process of the program 00 00 03 00 00 00 18 12 15 00 00 03 B Pl 2 Play Pause Stop A B mark The current time 8 4 Scheduled Recording Viewing Reminder Schedule an automatic programme recording or viewing event by directly selecting a programme from the EPG A B Scheduled recording Record a programme into a connected USB storage device Viewing reminder Show a scheduled programme on time NOTE If channel locks or parental control locks are enabled the locked programmes and channels can be recorded viewed and played back on this TV using password access Key in your current password when the password prompt pops up While recording is in progress for a locked channel you wi
22. e sure your USB storage device has ample space for recording Please do not turn off or unplug the USB storage device during recording This may damage the USB storage device or cause data corruption Recording in Standby Mode Continue recording after turning off the TV Similarly scheduled recording can be done while the TV is turned off in Standby Mode 1 PressC while watching TV to start recording Alternatively MENU gt CHANNEL Menu gt Record Start 2 Press 1 to turn the TV off into Standby Mode 3 A prompt will appear Choose whether to continue recording after turning the TV off then press Setting a Record Limit Set a time limit for Instant Recording When the time limit is up recording will stop automatically 1 Press MENU to display the OSD 2 Use to navigate to CHANNEL Menu Free Record Limit and adjust the setting between 1 6 hours 8 3 Time Shift Pause Live TV Pause live TV temporarily and avoid missing part of the TV show even if you are interrupted CANCEL 1 Press OD while watching TV to pause live TV and start Time Shift Press to resume watching TV from where it was paused The TV will continue recording live TV 2 When a Time Shifted programme is playing a sign is displayed on the screen 3 Press o if you wish to display the Time Shift progress bar during Time Shift recording Press again to close REVEAL 4 Press to stop re
23. e through the different sound settings SLEEP Repeatedly press to scroll to preferred off time ASPECT Adjust picture size PICTURE SOUND SLEEP ASPECT NUMBER BUTTONS Choose and view a channel directly by keying in the specific channel number GO Return to the previous channel viewed CH FAV Displays Channel List and the Favourite Program List MENU Press to display the OSD menu EXIT Press to exit the OSD menu CURSOR KEYS 4 4 Allows you to navigate through the on screen menus and adjust the system settings to your preference CH A Y Channel Program VOL lt gt Volume EPG To show the Electronic Program Guide DISPLAY Press to display the current mode s information Remote Control D SETUP D MENU D TITLE SUBTITLE A B GOTO D SETUP D MENU D TITLE No function TV TXT CANCEL REVEAL REPEAT VOL Volume REPEAT Repeat playing the title or chapter DELETE Delete recorded programs from the Record List HOLD SIZE SUBPAGE INDEX i o c co c REC LIST Display Recorded List SCREEN 1 While playing music press this button to turn off the LED TV screen um aum xm um 2 While in HDMI input press this button to change between Video and PC mode 3 While in VGA PC input press to auto align screen On Screen Display OSD Menu 98 e 5 go o 9 TE 5 gt 5 Digital Video Recording DVR USB Multimedia Reference
24. ed settings will be erased Adjust backlight settings Display system and support contact information Access HDMI CEC options Turn HDMI CEC On or Off Auto Turn Off Turn this option On or Off When it is enabled turning a connected compatible CEC enabled device will also trigger the other device to turn off HDMI CEC Consumer Electronics Control allows compatible CEC enabled devices that are connected via HDMI to communicate with each other and enable smart controls like simultaneous power on and off Compatibility depends on the hardware specifications by the individual manufacturers as well as the availability of the CEC function on the devices 15 On Screen Display OSD Menu TV amp Electronic Programme Guide T 9 gt uum 2 ST D9 9 x USB Multimedia Playback Reference TV amp Electronic Programme Guide c 9 gt ME 85 20 9 USB Multimedia Playback Reference 7 TV amp ELECTRONIC PROGRAMME GUIDE EPG 7 1 ATV DTV Mode Start watching TV by pressing INPUT to switch to the ATV Analogue TV or DTV Digital TV input source For detailed steps on changing inputs please see the Input Source section ATV and DTV depends on the broadcasting services available in your locality The quality of received channels depends on the strength of the signal reception in your location We recommend using an external antenna connection to rece
25. es 10 Reference 10 1 Troubleshooting 10 2 Specifications AUN C1 O1 10 10 11 12 13 13 31 32 1 SAFETY PRECAUTIONS 1 1 Power Supply MI DO NOT touch the power DO NOT use a damaged DO NOT plug several devices Insert the power plug fully into plug with wet hands power cord or plug or a into the same outlet the outlet loose outlet l A congested outlet may cause A loose or improperly Doing so may result in Doing so may result in the outlet to overheat and start inserted power plug electric shock fire or electric shock a fire may result in fire TV Placement DO NOT bend the power cord excessively or place heavy objects on it Parts amp Connections Doing so may result in fire or electric shock Initial Setup amp Input Sources 2 5 2 a 2 2 When disconnecting the _ Always unplug the unit before 9 power cord from an cleaning o outlet always grasp it by The purpose of these precautions is to ag the plug Not doing so may result in Ze fire or electric shock ensure user safety and prevent property 59 Pulling on the cord damage E can damage the internal wire S Be sure to read and observe all safety gt 2 a precautions It is the responsibility of the user to make sure all precautions and warnings are heeded and followed
26. ge Precautions Never turn the unit off or disconnect a USB Storage Device Flash Drive when it is being accessed Doing so could damage the TV and the connected USB storage device e Do not use a device that has a maximum current consumption of 100 mA or more e Do not use a device that has security functions or other special functions e Do not use a device that is divided into two or more partitions e A USB hub cannot be used to connect USB devices to this unit USB storage devices that can be played on this unit e Only USB Storage Device Flash Memory maximum 16GB can be used Do NOT use a high capacity USB hard disk with this unit Some flash memory players that charge from USB terminals cannot be used for playback Hard disk drives CD DVD Drives and other devices connected via USB cannot be used e This unit cannot copy or move files e Playable formats FAT16 FAT32 Depending on the condition of the USB flash drive this unit might not be able to play the files on it or skipping might occur NTFS HFS and HFS formats are not supported and cannot be used Max number of playable folders 200 Max number of playable files 999 If the USB storage device contains more than 999 files or 200 folders this unit cannot play it back correctly This unit cannot play files that are larger than 2GB e Files with variable bit rates might not play correctly File information display e The display of this unit can only show sin
27. gle byte letters and numbers e f the file information contains Japanese Chinese or other double byte characters playback is possible but the name will not be shown correctly 26 9 USB MULTIMEDIA PLAYBACK This TV can play movie audio image and text files from a connected USB device For information on supported file formats see the Reference section 9 1 Connecting the USB Storage Device Use a USB storage device such as a hard disk drive or flash drive USB devices such as mobile phones MP3 players and cameras are NOT supported 1 Connect the USB storage device to the USB1 port on the back panel of the TV 2 If the USB storage device uses its own power supply make sure it is turned on 3 When the device is detected it will be listed in the Multimedia Menu The TV may take a while to read the data depending on the device s storage size and content D NOTE For best results we recommend using a USB storage device with Data storage capacity up to 1 5 TB external power supply Maximum USB extension cable length 50cm 9 2 Playing Multimedia Files Press DTV USB orINPUT and switch to the USB input source When in USB Input Mode the USB Menu will be shown Browse and play files using specific menus for different file types Return to device list Preview Up Folder Information 1 In the USB Menu press to choose the desired multimedia type Photo for images Music for audio Movie for videos a
28. he wall directly behind it by fixing eyebolts to the wall and tying them to screws fixed on the centre of the TV back panel Initial Setup amp Input Sources Wall Mounting 1 Ensure that the selected wall is made of appropriate material and can support the weight of the TV Make sure there are no pipes or cables inside the wall on your chosen position Obtain a suitable wall mounting bracket and mounting eyebolts thread size M6x12mm and screws from your local hardware store Place the unit face down on a soft surface Remove the attached leg at the bottom of the TV by removing the 5 screws on the leg cover Refit the cover securely by replacing the 5 screws into their original positions Remote Control OSD Menu gt 5 2 E e S le PW N TV amp Electronic Programme Guide Digital Video Recording DVR USB Multimedia Playback Reference Initial Setup amp Input Sources Parts amp Connections Remote Control OSD Menu gt 5 o 2 TV amp Electronic Programme Guide Digital Video Playback Recording DVR USB Multimedia Reference 2 TV PLACEMENT SETUP Wall Mounting 6 Fasten 4 eyebolts into the four screw holes on the TV s rear panel according to the diagram Fasten the wall mounting bracket using screws onto the wall
29. ideo Connect to the composite video output of external devices Audio L R In Audio signal input for AV shared with YPbPr gt 5 Headphone Connect to headphones c 9 gt va 2E 55 DER Qo c Playback NOTE Before making or changing cable connections please make sure that power to USB Multimedia the unit is completely disconnected by switching off the power supply and unplugging the power cable from the wall outlet Reference 4 INITIAL SETUP amp INPUT SOURCES 4 1 Initial Power On When the TV is turned on the first time out of the box or after a factory settings reset it will prompt you to run auto channel tuning Connect the TV to your antenna wall socket using a coaxial TV cable After making sure all connections are secure plug in the power cord and turn on AC power Press I on the remote control to turn on the TV The TV will initialise and prompt you to choose between Home Mode and Shop Mode Home Mode is recommended for optimal energy saving Choose with 4 v and press to proceed 5 Next a tuning menu will display Adjust the settings with 4 a and press to start tuning 6 After tuning is complete the TV will display programmes from detected channels I NO D NOTE If no channels are detected please check the connection and condition of your external antenna 4 2 Selecting an Input Source To play different media types and from any
30. ing Ignoring this precaution may result in death or serious injury Caution Ignoring this precaution may result in injury or property damage USB Multimedia Playback Reference 1 SAFETY PRECAUTIONS 1 3 Use and Maintenance Although the LED screen is made with high precision technology and 99 99 or more of the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LED screen This is a property of the LED screen and is not a malfunction da EU Disconnect the power cord from Objects such as screwdriver the power source during a thunderstorm Not doing so may result in fire or electric shock When not using the unit for long periods of time discon nect the power cord from the wall outlet f not cleaned clogged dust particles at ventilation holes could cause the unit to heat up and ignite when switched on which may result in a fire outbreak Always have two or more people dust on the power plug pins _ with a clean dry cloth at hand to lift or move the unit f the unit is dropped it could get damaged or otherwise cause injury DO NOT insert any metal paper clip or a bent wire into the ventilation openings A V _ terminals _ Doing so poses a serious risk _ Of fire or electric shock When moving the unit be sure to turn off the unit and unpl
31. ing bracket is damaged do not use it to support the TV Contact your dealer immediately Remote Control OSD Menu gt amp a p A o O E m 9 m gt Programme Guide Digital Video Recording DVR Playback USB Multimedia Reference 2 IV PLACEMENT SETUP F n th e sta n d Note the pictures below are only for reference The parts needed for installing the stand supplied Before installing the stand please ensure that the Stand is in good condition without scratches broken parts or missing parts If these problems are found please contact TEAC bh 7 Stand Screws supplied 4 x ST4 x 28F How to install the Stand 1 Place the TV set on a horizontal table covered with a soft cloth with the screen side down and the bottom side of the frame near the table edge 2 Align the Stand to the neck of the TV set as shown in the picture below TV Placement Setup 1 Before fixing the Stand on please make sure the front and back direction of the Stand is correct as shown in the picture below 2 When you screw on the Stand make sure that the neck of the TV set is in the correct position and fixed tightly CAUTION If the Stand s position is incorrect the TV will be unstable and fall over easily Parts amp Connections
32. ing on screen hints for button controls CANCEL 1 2 3 Press to view in full screen Press to see the Photo Playback control bar 4 Press and to use the buttons on the bar Repeat Select between Repeat All Repeat One Repeat None Music Play Pause music in the current playlist if any has been selected gt Show the current playlist Use and to display a specific image SCH LIST REC LIST Playlist Press C 2 to remove a highlighted file from the list or CO to remove all files Press O to return to the control panel Info Display detailed image information Rotate Rotate current image Zoom Out In Zoom out in on current image Move View Move around in a zoomed in image Playback E o 9 gt ta 5 Reference 28 9 USB MULTIMEDIA PLAYBACK Music Playback 1 In the USB Menu choose Music Playback with 4 and press 2 Add music files to a playlist by following on screen hints for button controls CANCEL m 3 Press to start playback Press 4 to use the Music Playback control bar 1 11 UEM j E E cd dae o e LIS Repeat Select between Repeat All Repeat One Repeat None Goto Time Jump to a specific time in the track by keying in the format HH MM SS I Press 4 to navigate into the current playlist Use and 2 to choose SCH LIST Playlist specific image Press to
33. irm and save the new password xdi oda adiu D NOTE The default password is 0000 If you have forgotten your password at any time use the master password 8899 to reset your personal password Channel Locking Lock specific TV channels so that they can only be viewed after using the right password 1 Press MENU to display the OSD M Po Es 2 Use 4 v to navigate to LOCK Menu You LI NAM mail will need the password for access 3 Select Enable Locks and set it to On 4 Select the Block Channel option and press The Channel Lock list will display T 5 Highlight a desired channel with 4 and press o REC LIST to lock it Press again to unlock E 6 Press to exit 19 TV amp Electronic Programme Guide 9 gt on gt 5 DES Qo c USB Multimedia Playback Reference TV amp Electronic Programme Guide c 92 va 2E S 9 9 USB Multimedia Playback Reference 7 TV amp ELECTRONIC PROGRAMME GUIDE EPG Parental Control for Rated Programmes Lock specific TV programmes by rating so that they can only be viewed after using the right password 1 Press MENU to display the OSD 2 Use 4 gt v to navigate to LOCK Menu gt Lock Channel and set it to On A password will be required to change this setting See the Password Customisation section for details 3 Use 4 v to select Parental Control a
34. is detail will be greyed out Formatting a Disk You may need to format the USB storage device for reasons such as A The device is currently in an incompatible format B The device s file system is damaged and needs to be rewritten via formatting C You wish to wipe all data from the device to begin again with an empty drive 21 Digital Video Recording DVR xo 8 Es 2 m 72 Reference Digital Video Recording DVR xe T ES m 72 E Reference 8 DIGITAL VIDEO RECORDING DVR Formatting will ensure that the USB storage device is in the FAT32 file system and that there is enough storage space available for recording programs CAUTION Formatting will erase ALL data on the storage device Please back up all valuable data before proceeding to format TEAC is not responsible for any lost data due to formatting 1 Select the disk drive to be formatted 2 Select the Format option in the DVR File System Menu and press _ 3 Select FAT32 option and press to start formatting NOTE The FAT32 file system is best for high speed storage devices High Speed FS is best for low speed storage devices After formatting into the FAT32 file system you will still be able to store and share other media files on the same storage device b Storage devices formatted in High Speed FS C system can only be used to
35. ith A Data storage capacity up to 1 5TB B Maximum disk partition size 400GB C An external power supply D Maximum USB extension cable length 50cm 8 1 Setting up for USB Recording 1 Connect the USB storage device to the USB1 port on the back panel of the TV If the USB storage device uses its own power supply make sure it is turned on Press MENU to display the OSD Use v to navigate to CHANNEL Menu gt DVR File System and press to access the setup options in the DVR File System Menu as described below Du I Selecting a Disk Drive and Checking Compatibility Select a desired USB storage device for recording if multiple devices are connected Then check if the connected USB storage device is compatible and ready for recording 1 Select a disk drive using the Select Disk option Kl 2 Select Check DVR File System in the DVR File System Menu and press 3 One of the following messages will appear SUCCESS for a compatible device FAIL for an incompatible device D NOTE This TV will always use the first partition C for recording purposes If your hard disk contains more than one partition please use the first partition for recording purposes Failure to identify the File System may also be due to insufficient memory space on the storage device or a faulty USB cable Try another USB storage device with a larger capacity or another USB cable If no device is connected th
36. ive channels Tune to TV channels using Auto Scan or Manual Tuning Auto Tuning Run a complete scan for channels and save all detected channels into the Channel List 1 Press MENU and navigate to the CHANNEL Menu 2 Use and to select the Auto Tuning option 3 Use 4 gt to adjust Country and Tune Type options 4 Press to start scanning D NOTE Auto Tuning will overwrite all previously saved channels and channel settings Ifthe ATV DTV option is selected the first 50 of the scan represents ATV tuning while the other 5096 represents DTV tuning Press if you wish to stop tuning halfway through the process DTV Manual Tuning scan a specific DIV frequency and save detected channels into the Channel List 1 Press MENU and navigate to the CHANNEL DTV Manual Tuning Menu 2 Use v and to select the DTV Manual Tuning option Use 4 gt to select a DTV channel 4 Press to start scanning ATV Manual Tuning ocan a specific ATV frequency and save detected channels into the Channel List 1 Press MENU and navigate to the CHANNEL Menu 2 Use and to select the ATV Manual Tuning option 3 Use v 4 gt to adjust scanning options 4 Press 0 to start scanning Yr eas 16 7 TV amp ELECTRONIC PROGRAMME GUIDE EPG 7 2 Electronic Programme Guide EPG While using DTV Mode press to display the EPG EPG is not available
37. l SCH LIST 2 Press to mark it to be moved then use to move it to a desired position SCH LIST 3 Press qu again to confirm the new position 7 4 Channel List and Favourite List Use the Channel List and Favourite Channel List to change channels with ease 1 Press CH 4 v to display the Channel List 2 Press CH a v a second time to dispo the Favourite Channel List 3 Use v to select a channel and 69 to tune into the channel 18 7 TV amp ELECTRONIC PROGRAMME GUIDE EPG 7 5 Password Lock for Channels and Programmes Use the LOCK Menu in the OSD for password settings This menu requires password access The default password is 0000 If you have forgotten your password use the master password 8899 Enable Locke E ET Parental Guidance NO BLOCK Enable Locks This option MUST be turned on to use any password locks for channels and other settings 1 Press MENU to display the OSD 2 Use v to navigate to LOCK Menu You will need the password for access 3 Select Enable Locks and use to turn it On or Off as desired Password Customisation oet your personal password with the following steps Press MENU to display the OSD Use 4 v to navigate to LOCK Menu You will need the password for access Navigate to Set Password and press Key the current password the default password is 0000 Key in the new password carefully Key in the new password once more to conf
38. line 1300 553 315 teacservicesupport awa com au www teac com au THEA r WARRANTY INFORMATION v1 5 2 DEC 2011 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Warranty Terms amp Conditions T TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill Maintenance and cleaning i e laser head is not covered by this warranty The TEAC warranty only applies to TEAC products purchased used and serviced in Australia 2 The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates being the Australian Consumer Law 3 Refund or replacement via your retailer is available for a period of 14 days after purchase for goods that have been inspected and determined to have a major failure Refund and exchange is not applicable for change of mind 4 Subject to the terms herein this warranty effectively covers the equipment as specified in the Warranty Periods Table below from the date of purchase TEAC
39. ll still need to key in the password to watch that channel This does not interrupt the recording process Schedule a New Recording Viewing Event This feature can be used in DTV Mode Ts 2 Press and use 4 gt to highlight a desired programme in the programme guide DELETE Press to schedule a recording or to schedule a viewing reminder A scheduling menu will appear The desired EET CX NN programme details will already be automatically set Press 4 gt a v to change any details if desired 1 Press to save If the new event clashes with i an existing event you will be asked whether to cancel the scheduling or overwrite the old event The Schedule List will display and list the new event ERIT Press 2 to return to TV viewing When the time is reached a countdown will be displayed before recording or showing starts NOTE If the TV is in Standby Mode Scheduled Recording will proceed without needing the TV to turn on At least 20 events can be scheduled If the maximum is reached existing events must be deleted before new ones can be scheduled 24 8 DIGITAL VIDEO RECORDING DVR Viewing the Schedule List Schedule List m Press 6 to exchange Recorded List anpa SCH LIST 1 Press CJ to display the Schedule List 2 Press v to scroll up and down the list Scheduled recordings will be marked with a camera icon and viewing reminders with a clock icon
40. nd Text for text files 2 Use v the list to select the device you wish to play from and press Choose the Return icon to return to the main USB ES 3 Use 4 v to navigate to desired files and folders Press 2 on highlighted folders to view folder contents and choose the Up Folder icon to return to the previous folder level 4 Press to start playing the current highlighted file Normal playback controls such as Pause Fast Forward and Fast Rewind are available DISPLAY C uw D Press or during Photo and Movie file playback to display a control bar for more playback controls D NOTE Depending on the file content some files may not play even if they are in a supported format 2 E 5 9 E ta E Reference Playback 9 USB MULTIMEDIA PLAYBACK Making a Playlist 1 While browsing files follow the on screen hints for button controls Add a file to a playlist by pressing on a highlighted file and checking its checkbox Repeat this action on other files to add them to the playlist 2 Remove individual files from the playlist by unmarking the checkboxes with 2 REC LIST 3 Alternatively press C 2 to select or unselect all files in the folder CANCEL 4 Press to start playing the highlighted file Photo Playback c In the USB Menu choose Photo Playback with 6 and press Add image files to a playlist by follow
41. nd choose a rating limit Programmes with the chosen rating and any ratings beyond it will be locked D NOTE Programme ratings depend on availability from the broadcasting service Locked programmes or channels cannot be recorded unless they are already being accessed using the password Please keep this in mind when scheduling recordings Watching 3D Broadcasts in 2D This is a non 3D TV but it can downconvert and display 3D DTV broadcasts in normal 2D When tuned into a 3D channel the 3D picture will most likely be displayed in a split screen format In order to watch normally in 2D on your 2D television find the correct 3D mode 1 While watching the 3D channel press the RED button to display the 3D Modes menu 2 Use to select the correct 3D Mode so that the picture displays in normal 2D without split screens or zooming errors 3 Press EXIT to resume watching the downconverted 3D channel in 2D 20 8 DIGITAL VIDEO RECORDING DVR This feature allows the recording of TV programmes to a compatible USB storage device like a hard disk drive or thumb drive While recording is in progress the front panel LED light will flash red and green D NOTE USB devices such as mobile phones players and cameras do NOT support file recording Recorded file sizes depend on the broadcast content up to several GB per hour For best recording and playback results we recommend using a USB storage device w
42. ning storms or when unused for long periods of time i Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this device This symbol indicates that there are important operation and maintenance instructions in the documentation accompanying this device NOTE To prevent damage which may result in fire or hazards do not expose the device to rain or liquids Do not place objects containing liquids such as vases on the device If drinks and liquids have been spilled on the device unplug the device from AC power immediately and contact the TEAC Customer Hotline for assistance servicing of this device should be conducted by qualified and certified TEAC service personnel The manufacturer will not be held responsible for any damage caused by modifications done on the device without authorisation from the manufacturer s authorised service agent 2 IV PLACEMENT SETUP 2 1 Accessories The appearance of the components may look different from the following figures a User s Guide Remote Control 2xAAA Batteries Quick Start Guide Contact Card 2 2 TV Stand Wall Mounting Assembly TV Placement This TV comes ready to be set up with the provided TV stand Alternatively opt to mount the TV on the wall by obtaining a wall mount bracket and mounting eyebolts sc
43. on available resources and workload during the time when service is requested and performed 9 Refurbished parts may be used to repair the product In the case of a replacement the product may be replaced with a refurbished unit of the same type or if one is unavailable a similar refurbished model with equal or better features amp specifications 10 Please be advised that if the product presented for repair is capable of retaining user generated data the data may be lost during servicing Customers are strongly encouraged to back up all important information data before sending the product in for service repair 11 Service will be provided only during normal business hours and under safety conditions and circumstances TEAC and its authorised service agents can refuse any repair if safety in relation to OH amp S becomes a concern to its staff or authorised service agents personnel 12 The warranty is void and warranty claims may be refused subject to the Australian Consumer Law if a The product was not transported installed operated or maintained according to manufacturer instruction or b The product was abused damaged tampered altered or repaired by any unauthorised persons or c Product failure is due to accidents during use installation or transit power surges use of defective or incompatible external devices exposure to abnormal conditions such as excessive temperatures or humidity or entry of liquids objects or crea
44. record from this TV ae Time Shift Size and cannot store other media files After the USB storage device is formatted into the FAT32 file system Time Shift cannot be altered During DVR File System Check the display will show that the whole storage device space will be used for Time Shift However Instant and Scheduled Recording will still have priority over available storage space For details on using Time Shift please see the Time Shift section 8 2 Instant Recording When a compatible USB storage device is connected you can record TV programmes at will with the press of a button While recording is in progress the TV s LED light will flash REPEAT 1 Press while watching TV to start recording Alternatively MENU gt CHANNEL Menu gt Record Start ERIT 2 Press if you wish to display the Recording progress bar during recording Press again to close REVEAL 3 Press to stop recording Recording 00 00 16 Max Recording 00 36 43 MIN 1 Prev Next Pause Stop 1 YLE TVi Syd men asialla 22 8 DIGITAL VIDEO RECORDING DVR NOTE CANCEL Press OID to view the currently recording file while recording ST REC il Press to play other recorded files from the Recorded File List It is not possible to view channels on other frequencies while recording is ongoing The recorded file size depends on the broadcasted content Please mak
45. rews thread size M6X12 from your local hardware store For best results we recommend that wall mounting should be performed by a professional installer Parts amp Connections NOTE TV should be levelled or angled directly at the viewer s eye Allow a space of 10cm around the TV to reduce risk of overheating The TV stand allows sideways turning of the TV to a limited degree Do not force it to turn more than it can as you will damage the stand Initial Setup amp Input Sources CAUTION sure the TV is completely disconnected and unplugged from power To prevent damage to the TV screen avoid touching or pressing on the screen with hands or objects at any time Do not press on the front panel as it may damage the screen To protect the TV from damage or scratching only place the TV on a soft flat surface like a table covered with a cotton towel or foam mat Assembly lifting and moving of the TV must be done by at least 2 people to prevent unit damage or physical injury from accidents Ensure that all screws are tight and secure after assembly so that the stand or mounting bracket is stable enough to prevent the TV from falling and causing personal injury or property damage Make sure that the TV is not knocked or pulled down from its position Prevent children and pets from playing with or climbing on the TV If the TV falls it may cause personal injury or property damage If the TV stand or wall mount
46. rons communication cables Make sure DO NOT place the unit near itis installed securely S any heat source such as a fire The excessive heat can melt it the antenna touches a power line ce or space heater 224 2 the insulation and expose live contact with the antenna E result div oT overneaung a possible TIT Wires resulting in fire or electric ME 3 outbreak in fire electric shock or serious injury 26 Doing so poses a serious risk Outbreak shock 9 o of overheating and a possible fire 22 outbreak E 2 5 BN KK E 9 0 1 gt 5 2 2x E Install the unit at adequate Do not cover the unit with a Be sure to place the unit on D distance from the wall to ensure tablecloth curtain or other level surface sufficient ventilation material Insufficient ventilation may result Insufficient ventilation may in the unit overheating which result in the unit overheating may cause a possible fire which may cause a possible outbreak fire outbreak 93 5 geo o o TE S PES Digital Video Recording DVR The following precautions are divided into Warnings and Cautions Disconnect this device from power by turning the power off at the AC power outlet and unplugging the AC plug Warn
47. sure to install batteries correctly Do not mix old and new batteries Digital Video Recording DVR Dispose of batteries safely and appropriately Contact your local authorities or dealer for advice on battery disposal Keep batteries out of reach of children Playback 1 To open the battery compartment press on the battery cover and slide it out 2 Insert 2 AAA batteries making sure to match polarities as marked in the compartment 3 Close the battery cover USB Multimedia Reference 12 6 ON SCREEN DISPLAY OSD MENU 6 1 OSD Menu Overview The OSD menu system acts as the Main Menu and allows access to main feature controls as well as optional user settings D NOTE Certain menus are available only in their relevant input modes eee ee 0 Main menu LE CHANNEL es used ing PICTURE BE ATV Manual Tuning SOUND 1 l Channel Edit TIME pig Submenu OPTION Recorded List Channel menu LOCK e ud id for example Free Record Limit Hint you should operate the OSD menu according to the hint Navigating the OSD Press MENU to display the OSD Use 4 gt to navigate to different menus via the tabs at the top Use 2 to enter a menu and select available settings or submenus Use 4 or press on a selected item to adjust settings or enter a submenu Press to confirm a setting and continue browsing the menu If you h
48. th video file playback The TV unit can only support audio formats of single and binary channels S o y a 33 TEAC TEAC CUSTOMER SUPPORT HOTLINE TCS 1300 553 315 Between Monday to Friday AEST 8 30AM to 6PM
49. tures into the product 13 Noone is authorised to assume any liability on behalf of TEAC or impose any obligation on it in connection with the sale of any equipment other than as stated in this warranty and outlined above 14 TEAC reserves the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers retailers 15 LED dead pixel policy please contact TEAC Customer Support Hotline on 1300 553 315 for assistance TABLE OF CONTENTS 1 Safety Precautions 1 1 Power Supply 1 2 Installation 1 3 Use and Maintenance 1 4 Important Safety Instructions TV Placement Setup 2 1 Accessories 2 2 TV Stand Wall Mounting Assembly Parts amp Connections 3 1 Front View 3 2 Back View Initial Setup amp Input Sources 4 1 Initial Power On 4 2 Selecting and Input Source Remote Control 5 1 Remote Control Buttons and Functions 5 2 Battery Installation On Screen Display OSD Menu 6 1 OSD Menu Overview 6 2 Menu Map TV amp Electronic Programme Guide 7 1 ATV DTV Mode 7 2 Electronic Programme Guide EPG 7 3 Channel Customisation 7 4 Channel List and Favourite List 7 5 Password Lock for Channels and Programmes Digital Video Recording DVR 8 1 Setting up for USB Recording 8 2 Instant Recording 8 3 Time Shift Pause Live TV 8 4 Scheduled Recording Viewing Reminder 8 5 Using the Recorded File List USB Multimedia Playback 9 1 Connecting the USB Storage Device 9 2 Playing Multimedia Fil
50. ug the power cord from the wall outlet Moving the unit with the power cord connected to the outlet may cause damage to the cord resulting in fire or electric shock DO NOT allow children to climb _ onto the unit The unit could topple over _ onto a child and result in Serious injury If you notice any unusual odors or smoke around the unit Wipe off any moisture dirt or _ Failure to do so may result in _ fire or electric shock _ Always turn off the unit and _ unplug the power cord when _ cleaning the unit Use soft dry cloth to clean the unit Never clean with irdustrial _ strength polish wax benzene paint thinner air freshener lubricant detergent or other such chemicals Also do not clean with a damp cloth DO NOT dismantle or modify the unit in any way Do not attempt to service the unit yourself Doing so may result in fire electric shock If the unit requires repair contact the _ Service center AWarnings When removing the batteries from the remote control make immediately disconnect the unit from the outlet and contact the _ Service center _ Failure to do so may result in _ fire or electric shock _ sure children do not swallow them Keep the batteries out of the reach of infants and _ children e If a child has swallowed a _
51. urope Windows Repeat Select between Repeat All Repeat One Repeat None A B Press once to set Point A and again to set Point B for looping playback Press again to resume normal playback H Press to navigate into the current playlist Use and to choose SCH LIST Playlist specific image Press to remove a highlighted file from the list or REC LIST EST to remove all files Press 2 to return to the control panel Info Display detailed video information Use the on screen 1 button to toggle slow motion playback at different Slow Fwd CANCEL speeds To resume normal playback press Step Fwd Use the on screen button to step forward within the track in small time increments Goto Time Key in a specific point to jump to using the HH MM SS format Musical Photo Text Slideshow Play music while viewing images or text 1 In the USB Menu choose Music Playback with 4 and press 2 Add music files to a playlist by pressing on a highlighted file For details on adding files to playlists please see the Making a Playlist section After the music playlist is done press 2 to return to the USB Menu Choose Photo or Text Playback with 4 and press Add the desired image text files to a playlist CANCEL Press OID to start displaying the images text Press to display the on screen control bar Start simultaneous music playback by choosing the Music button in the control bar 30

USER MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents