Installation manual for Cable bracket Kit
Contents
1. Installation manual for Cable bracket Kit 4 The rod from the actuator is carefully bent so that it lies parallel to the cable about Package components an eighth inch away from it The rod can be placed either above or below the 1h cable The clamp is then placed over the rod and saddled onto the cable a U clip Xi a ho ila e d a b Cable holder XA hy aaa c Bracket x1 e d Hexagon screws 46mm x2 C e Zinc screws 4 25 4mm x2 S 5 a aia There is a U Clip insert that fits between the clamp and the cable This insert must 2 be used to prevent damage to the cable The lock actuators are adjusted and To locate a spot for bracket and door l l i Actuator must be mounted parallel to this centered per the instructions and the hexagon screws on the clamp are tightened lock actuator Screw bracket on door panel and fix the cable holders on bracket bracket and cable assembly Make sure cable can be pushed straight back and forth 6 3 IT MUST BE MUCH CAREFUL NOT TO NICK OR CUT THE INNER STEEL CABLE WHILE CONNECTING BRACKET The cable leather should now be stripped away between the indentations on the bracket If it becomes necessary to remove the cables from the clamps the cable must be marked carefully so that it can be reinstalled into the exact same position
Download Pdf Manuals
Related Search