USER MANUAL
Contents
1. amp 9 P 55 a ow a im AWarnings r i When not using the unit for When moving the unit be sure If you notice any unusual odors _ When removing the batteries long periods of time discon _ to turn off the unit and unplug or smoke around the unit o nect the power cord from the _ the power cord from the wall _ immediately disconnect the unit sire childrefido mot mere wall outlet Outlet from the outlet and contact the _ them Keep the batteries out of S _ service center em ur reach of infants and If not cleaned clogged dust _ Moving the unit with the _ Failure to do so may result in childram particles at ventilation holes power cord connected to the fire or electric shock could cause the unit to heat up outlet may cause damage to P and ignite when switched the cord resulting in fire or p S 2 which may result fire electric shock Bien _ immediately outbreak a 2 fe Se 9 we ES Always have two or more people Wipe off any moisture dirt or _ Always turn off the unit and Do not display still images and partially E LY at hand to lift or move the unit dust on the power plug pins unplug the power cord when Still images on the LED panel for more With a clean dry cloth _ cleaning the unit Use a soft2. Recording Operation The following precautions are divided into Warnings and Cautions Disconnect this device from power by turning the power off at the AC power outlet and unplugging the AC plug Warning Ignoring this precaution may result in death or serious injury Caution Ignoring this precaution may result in injury or property damage Maintenance and Service Use and Maintenance Although the LED screen is made with high precision technology and 99 99 or more of the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LED screen This is a property of the LED screen and is not a malfunction Warnings Disconnect the power cord from DO NOT insert any metal _ DO NOT allow children to climb DO NOT dismantle or modify the the power source during a objects such as screwdriver X onto the unit _ unit in any way Do not attempt to thunderstorm paper clip or a bent wire into _ service the unit yourself _ the ventilation openings or A V The unit could topple over e Not doing so may result in fire terminals onto a child and result in or electric shock Serious injury Doing so may result in fire or _ Doing so poses a serious risk _ _ electric shock If the unit _ of fire or electric shock requires repair contact the _ Service center
3. Y 16 17 4c Feature Men TS 18 19 MEN e 20 Multimedia Operation Itultimedia ODGOFPaloLbi i a tus ides babs EL DU 21 23 Recording Operation OCT iro o 24 26 Maintenance and Service a 27 SS c PP RN E 28 29 Power Supply ___ 4a ALE DO NOT touch the power DO NOT use a damaged DO NOT plug several devices Insert the power plug fully into plug with wet hands power cord or plug or a into the same outlet the outlet loose outlet A congested outlet may cause _ A loose or improperly Doing so may result in Doing so may result in the outlet to overheat and start inserted power plug electric shock fire or electric shock fire result fire User Guidance Information DO NOT bend the power cord excessively or place heavy objects on it Doing so may result in fire or electric shock Basic Operation 5 a N When disconnecting the Always unplug the unit before S 6 power cord from an AC _ Cleaning always grasp it by The purpose of these precautions is to S _ fire or electric shock ensure user safety and p
4. 3 Lock Enable Turn on off the Lock functions Note When it is be turned on the functions of Parental Guidance and Change Pin code below will be locked and the functions Lock in Channel Management Auto Search DTV Manual Search ATV manual Search in Channel menu will also be locked Parental Guidance Select the Parental Guidance mode or turn off the function Change Pin Code Press OK button to enter first enter the current code then enter your new code and confirm your new code Recording Operation Maintenance and Service 18 OSD Menu Language Lets you adjust the different language options available Clock Allows you to set the clock as default the information is taken automatically from the digital signal Sleep Timer Lets you set the sleep timer so the television automatically switches off after a certain amount of time Auto Power Off The TV will switch off itself automatically if no change in status within the time you select You can choose 1H 2H 4H or off Hearing Impaired You can switch on the hearing impaired feature this provides additional information and subtitles DVR File System See page 24 26 HDMILink Enable HDMILink Auto PowerOn Auto Standby Picture Sound Amplifier Control Off b Speaker Preference TV Speakers d Setup av Move Ext Ext Menu Return This option is only available in HDMI I
5. o Recording Operation DVR settings Press the MENU button select Feature DVR Timeshift menu press OK button to enter the menu as below R Format Language Timeshift Buffer 0 b gH Clock gt n Free Record Time b Sound Sleep Timer gt Sound Schedule List b Auto Power Off gt E Record List d Hearing Impaired _ Recorder Start gt DVR File System Link gt 1 Format Total Size 180 Free Size 156 USB device informations Ii Format Format Press RED button to format the selected USB device The USB Storage device will need to be formatted before being used for Recording functions to ensure the USB device connected is been format in FAT32 file system and that there is sufficient storage space available for recording programs 2 Timeshift Buffer Set Timeshift Buffer mode Auto 30Mins 1hr 2hr 3 Free Record Time Select recording time from 1 hour to 4 hours 4 Schedule List Enter the Timer menu to setup the timer recording settings 5 yellow button to add 20 07 2005 22 06 49 Ch No Channel Start Duration 8 Date Mode 07 12 2005 18 36 51 o E LI Recorder 4 DTV gt J Channel YLE TV1 ENNEEEEEKC L MEC MEL 0l Lag 07 12 2005 4 25 9888885 Del Dei All EH Add m Edit 24 Recording Operation Recorder Turn on off the recorde
6. HOLD SIZE SUBPAGE INDEX DELETE RECLIST SCH LIST SCREEN Buttons for USB operation e REC Press to start recordingthe program in DTV mode A No function B Stop program 44 Previous chapter gt gt Next chapter gt Il Play Pause program 4 Fast reverse gt gt Fast forward Buttons for TELETEXT operating Teletext is an information system broadcasted by certain channels which can be consulted for news weather forecasts puzzles etc and also offers subtitles for viewers with hearing problems or who are not familiar with the transmitted language Subject to availability TV TXT Turn off on the Teletext display CANCEL Cancel the Teletext display REVEAL Reveal any hidden text HOLD Hold or carry on the current subpage SIZE Press to see top half of page double size Press again to see the bottom half of page double size Press again for normal size SUBPAGE Press to subpage again to cancel INDEX Go to index SCH LIST Display the programs list Colour buttons Short cuts follow the coloured links in the text 11 m 3 Recording Maintenance Basic Operation OSD Menu Operation Operation and Service Basic Operation The following section conveys the unit s general operation such as switching the unit on selecting the input source and using the automated channel search command Switching the unit on The following steps are a
7. TEAC LE3990FHD LED TV USER MANUAL IMPORTANT WARRANTY INFORMATION INSIDE PLEASE READ T WARRANTY PROCEDURE v1 5 2 DEC 2011 Please read the owner s manual carefully and ensure that you have followed the correct installation and operating procedures 1 Please read this warranty card 2 Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service 3 If you require Warranty Service please contact the TEAC Customer Support Hotline at 1300 553 315 for assistance Please ensure that you have the model number serial number and purchase receipt ready when you call Please complete the section below and keep this information for your own records Owner s Name Owner s Address Postcode Model Name No Serial No Dealer s Name Dealer s Address Postcode Authorised Service Centres in Major Australian Cities NSW Queensland Western Australia 151 Arthur Street Unit 1 320 Curtin Ave West Unit 2 50 Pilbara Street Homebush West NSW 2140 Eagle Farm QLD 4009 Welshpool WA 6106 South Australia Victoria 11 McInnes Street 282 Normanby Road Ridleyton SA 5008 South Melbourne VIC 3205 Thank you for selecting a TEAC product If you should require assistance with your product regarding its setup or operation or if any difficulties arise please call us directly for advice between Monday to Friday at 8 30AM 6PM AEST at the TEAC Customer Support Hotline 130
8. Information and Playlist owitch off the screen displaying BLUE button as quick button and it will be turned on by exepet power button Recording Operation Maintenance and Service 22 Multimedia Operation 3 Movie Play the movie F I 6 v b U 00200220700 06 36 gt gt A4 Press gt button to select the option on the table and press OK button to change Note You could press OK button to display the option table when it disappears 11 Play Pause the movie playing Stop and exit the full screen program 4 gt gt Play fast backword or forword Play the movie in slow mode gt Play the movie in step mode s Set the A B repeat playing mode 14 gt Play the previous or next file directly Ed Display the playing list Q Display the information of the current file Display the movie setup menu and setup the Program Subtitle Audio Repeat mode Goto mode Input the time and start playing directly 4 eBook Play the text e Book m 5 Operation Recording Operation 44 gt P Turn to previous next page of the text RED button Add or delete the bookmark GREEN button Goto the appoint page YELLOW button Display the bookmark list BLUE button Display the playlist Maintenance and Service 23 Recording S Operation D
9. atc 5 ww 9 Specifications Input Connector 39 1920x1080 AUDIO L R PC AUDIO HDMI RF Output Connector HEADPHONE 3 The HDMI support 1 3 the HDCP support 1 1 100 240V 50 60Hz TOW lt 0 5W PAL BG DK I SECAM BG DK 48 25 863 25 MHz 2x5W 75 ohm NTFS FAT32 Maximum supported hard disk size 400G USB2 0 See the table on next page WUXGA Maximum supported resolution 1920X1080 60Hz 890x230x582mm 890x82x531mm 9 5kg 200x200mm M6X10 0 40 C e Specifications are subject to change without notice Weight and dimensions are approximate 28 Specifications Supported Formats MOVIE The max bitrate is 6Mbps The max resolution is 720x576 pixels AVI Mono colour 16 colour 256 colour 16 bit 24 bit 32 bit The max PHOTO resolution is 3000x3000 pixels min resolution is 100x100 pixels MUSIC Sample rate 8K 48K Bitrate 32K 320K Special note 1 The Media Unit can only support USB memory devices such as hard disk drives and flash drives and will not support multimedia devices such as mobile phones and cameras for recording purposes 2 Unit will only support hard disk drives with additional power supply maximum disk partition size of 400GB and a maximum capacity of 1 5TB For optimum performance it is highly recommended that a hard disk drive with an external power supply
10. Favs Fav4 Type Recording Operation BBC TWO ANTENA 3 ANTENA NEO X ANTENA NOVA 28 GOL TELEVISI N ONDA CERO EUROPA FM ONDOA DEL rime fio oc mas Y gt Maintenance and Service 16 OSD Menu Country Select the country When the Child Lock is on please enter the Password Lock Password in Feature menu to start Auto and Manual Search Auto Search Press OK button to enter the Auto Search menu select search mode and press OK button to start auto search Channel Auto Search Note 1 ALL Auto search channels for DTV ATV and Radio T DTV Picture ATV DTV Auto search channels for DTV and radio ATV Auto search channels for ATV Sound EE 2 When the TV is auto tunning you could Feature press MENU button to stop auto tunning and 1 return to preview menu Setup TA DTV Manual Search Enter the DTV Manual Search menu Press V button to select the Channel item and press lt gt button to select the channel then press A V button to select the Start item and press lt gt button to manual search Channel DTV Manual Search Frequency KHz Picture BandWidth MHz gt Sound Channel 5 E Strength 95 S Setup e ATV r anual Search Enter the ATV Manual Search menu pe Channel ATV Manual
11. be used for larger capacities 3 The maximum number of files that each folder can contain is 5000 files 4 When using external USB it is suggested that high quality USB extension cables supported 480mHz be used to ensure smooth playing of video files 5 The television unit can only support audio formats of single and binary channels 2 T F 9 wf Es atc 5 29 TEAC TEAC CUSTOMER SUPPORT HOTLINE TCS 1300 553 315 Between Monday to Friday AEST 8 30AM to 6PM
12. dry than 2 hours as it can cause screen e If the unit is dropped it could cloth to clean the unit ead u get damaged or otherwise Failure to do so may resultin such image retention reduce ihe cause injury fire or electric shock Never clean with irdustrial degree of brightness and contrastar ihe strength polish wax benzene screen when displaying a still image 2 _ paint thinner air freshener _ Watching the LED TV in 4 3 format for a T _ lubricant detergent or other long period of time may leave traces of 9 z such chemicals Also do not borders displayed on the left right and oa clean with a damp cloth centre of the screen caused by the co difference of light emission on the screen Playing a DVD or a game F console may cause a similar effect to es the screen Damages caused by the above effect not covered by the Warranty Displaying still images from Video games and PC for longer than a certain period of time may produce partial after images To prevent this effect reduce the brightness and contrast when displaying still images T F O wf so ce Important Safety Instructions Warnings and Precautions To prevent any injuries the following safety precautions should be observed in the installation use servicing and maintenance of this equipment Before operating this equipment
13. guide to switch the unit on 1 Connect the television unit to the antenna wall socket using a coax television cable plug 2 Connect power cord to power supply and turn on the POWER Switch to ON 3 Press the DPOWER button on the remote control or on the television panel 4 he on screen television display should appear Selecting an input source The unit incorporates multiple input sources which can be selected via the INPUT button on the television panel or remote control The following steps explain the procedures s involved a I 1 Press the INPUT button to enter the Input menu The MESE screen will display the Input Source menu ms 2 2 Use the CH button on the TV set or V direction MIS E buttons to select the desired input source STIS 3 Press OK to enter the selected source EC NOTE Please make sure the device is connected Media before selecting the input source OSD Menu E Operation Recording Operation Maintenance and Service 12 Basic Operation Using the On Screen Display Menu The On Screen Display OSD menu acts as the Main Menu and aids the user in browsing through the different options properties available on the television unit Press the MENU button on the remote control to access the OSD menu as shown below Main menu Picture Sound Channel Feature Setup Picture Picture Mode Brightness Contrast 50 d Sound Sharpn
14. into the product 13 Noone is authorised to assume any liability on behalf of TEAC or impose any obligation on it in connection with the sale of any equipment other than as stated in this warranty and outlined above 14 TEAC reserves the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers retailers 15 LED dead pixel policy please contact TEAC Customer Support Hotline on 1300 553 315 for assistance Contents oafety Precautions mie SO DIY ecc A 1 HAS 21 Em 2 WSS AGH Vell ell CO ca 3 ImportantodateU InstF cllofts euet dodi in 4 5 User Guidance Information Wall Mouming M Ino dan r LiTo p D 6 Miner T p pen E NR T Accessories Names of each part Front View 8 Names of gach par BaCk E E tu Del MEN A UE E 9 Remote Contool eskop M 10 11 Basic Operation BASIC A A 12 13 OSD Menu Sia NTR Es ee aoe a tn ano torpe itat im ose ta EPI CAE ET LET S 14 Zee BRI 15 se
15. please read this manual completely and keep it nearby for future reference 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Clean only with a dry cloth 6 Do not block any of the ventilation openings Install in accordance with the manufacturer s instructions Basic Operation 7 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 8 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the power socket OSD Menu 9 Do not bend the power cord excessively event the cord from being walked on or pinched by weights placed on it Multimedia Q 2 10 Only use the attachments accessories specified by the manufacturer 11 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus Recording Operation m Maintenance and Service Important Safety Instructions 12 Unplug this apparatus during lightning storms or whe
16. 0 553 315 teacservicesupport awa com au WWW teac com au T AC WARRANTY INFORMATION v1 5 2 DEC 2011 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Warranty Terms amp Conditions 1 TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill Maintenance and cleaning i e laser head is not covered by this warranty The TEAC warranty only applies to TEAC products purchased used and serviced in Australia 2 The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates being the Australian Consumer Law 3 Refund or replacement via your retailer is available for a period of 14 days after purchase for goods that have been inspected and determined to have a major failure Refund and exchange is not applicable for change of mind 4 Subject to the terms herein this warranty effectively covers the equipment as specified in the Warranty Periods Table below from the date of purchase TEAC PRODU
17. CT WARRANTY PERIOD LED LCD TV 32 80 cm and above 1 Year In Home Service Pick up Available All other TEAC products 1 Year Carry in Service In Home Service Pick up Service This service will only be provided as part of this warranty if all the following conditions are met a The product is indicated in the Warranty Period Table b The product is within the warranty period C The product is located within the normal service area of the local TEAC Authorised Service Centre If TEAC determines that the product is not repairable on site TEAC can complete the repair by taking the product to a TEAC Authorised Service Centre Carry in Service Where In Home service Pick up is not available the purchaser is required to send the product to the nearest TEAC Authorised Service Centre for repair In this event proof of purchase is required to support a warranty claim After the repair the product will be available for collection by or return to the purchaser at a fee upon request TEAC in home service can be made available at a fee upon request 6 A 12 month replacement warranty is applicable to all Accessories such as Remote Power Adaptors and Cables T TEAC will ensure to the best of its abilities that all required parts are made available for any required service repair 8 TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product repairs within a reasonable period based on av
18. PICTURE SOUND SLEEP ASPECT NUMBER BUTTONS Choose and view a channel directly by keying in the specific channel number GO Return to the previous channel viewed CH FAV Displays Channel List and the Favourite Program List MENU Press to display the OSD menu EXIT Press to exit the OSD menu CURSOR KEYS A W lt P OK Allows you to navigate through the on screen menus and adjust the system settings to your preference CH A Y Channel Program VOL lt P gt Volume EPG To show the Electronic Program Guide DISPLAY Press to display the current mode s information Basic Operation OSD Menu D SETUP D MENU D TITLE SUBTITLE A B GOTO D SETUP D MENU D TITLE No function TV TXT CANCEL REVEAL REPEAT VOL Volume REPEAT Repeat playing the title or chapter DELETE Delete recorded programs from the Record List REC LIST Display Recorded List SCREEN 1 While playing music press this button to turn off the LED TV screen I s AM ee 2 While in HDMI input press this button to change between Video and PC mode 3 While in VGA PC input press to auto align screen Operation 2 3 SIZE SUBPAGE INDEX Recording Operation Maintenance and Service 10 Remote Control DTV USB INPUT AUDIO MUTE PICTURE SOUND SLEEP ASPECT E3 EB EB Cz E c3 MENU EXIT DISPLAY D SSETUP D MENU D TITLE TV TXT CANCEL REVEAL REPEAT
19. Search m 5 Operation LU T Frequency 49 75 Picture AES Search ENTER D Sound Fine Tune ENTER gt Color System PAL gt De Sound System BG gt E of Feature d co ED Mi Save av Move Ok Enter Ext Menu Rett Current Channel Select the current channel for manual searching Search Press OK button to enter the search menu and manual search the frequency by lt gt button Fine Tune Press OK button to enter the Fine tune menu and fine tune the frequency by lt gt button Color Sound System Select the Color Sound system for the program Maintenance and Service 17 OSD Menu 4 Feature menu Lock ENTER 2 Language 2 Picture _ Clock ENTER gt gt gt Sound Sleep Timer Auto Power Off Channel Hearing Impaired op 88 DVR File System MEEEEEEEEEEEED HDMI Link ENTER E Setup Description Lock This menu allows you to lock certain features of the television so that they can not be used or viewed For example if you don t want certain channels viewed by children or if the television is to be used in a hotel and you want certain channels be locked When you enter the system lock menu you will be asked for a password As default it is 0000 Feature Lock Lock Enable Parental Guidance Picture Change Pin Code OSD Menu Sound Channel Setup Menu Return E
20. ailable resources and workload during the time when service is requested and performed 9 Refurbished parts may be used to repair the product In the case of a replacement the product may be replaced with a refurbished unit of the same type or if one is unavailable a similar refurbished model with equal or better features amp specifications 10 Please be advised that if the product presented for repair is capable of retaining user generated data the data may be lost during servicing Customers are strongly encouraged to back up all important information data before sending the product in for service repair 11 Service will be provided only during normal business hours and under safety conditions and circumstances TEAC and its authorised service agents can refuse any repair if safety in relation to OH amp S becomes a concern to its staff or authorised service agents personnel 12 The warranty is void and warranty claims may be refused subject to the Australian Consumer Law if a The product was not transported installed operated or maintained according to manufacturer instruction or b The product was abused damaged tampered altered or repaired by any unauthorised persons or c Product failure is due to accidents during use installation or transit power surges use of defective or incompatible external devices exposure to abnormal conditions such as excessive temperatures or humidity or entry of liquids objects or creatures
21. ation of the programs to be broadcasted in daily mode Weekly mode shows the information of the programs to be broadcasted in weekly mode Reminder Press GREEN button once to remind the program for watching and press GREEN button again to remind the program for recording You could check it in Timer menu and the TV will record the program according to your settings automatically Previous Next Day Press YELLOW BLUE button to display the programs on previous or next day T F wf IE ce 25 Recording Operation T F wf s5 cc Recording Operation Recording Press REC button on the remote control to start recording in DTV mode and the TV will give you a hint Select OK item and press OK to start recording there will be a sign on the screen Do you want to start Recording Note a Please make sure the USB device is on the TV b Please mke sure the speed and free space of the USB is enough c Press STOP button to exit the recording mode d Press Recording list button to display the Recorder list and you could play the program you selected The recording will be going on and the Recording menu will display when you exit the Recorder list e You could also play the Recorded program in Multimedia mode Timeshift Press PII button on the remote control to start timeshift in DTV mode and the TV will give you a hint Select OK item and press OK to start t
22. audio output terminal of external devices shared with YPbPr HDMI1 2 3 Connect to the HDMI output of external devices like DVD players with a HDMI cable USB Connect USB storage devices hard disk drives VGA For PC video input Connect to the VGA RGB plug on the PC PC IN Connect to the audio output terminal on the PC YPbPr Connect to the YPbPr video output sockets of external devices OSD Menu Multimedia Operation 5 6 Ce o 2 ae NOTE Before making or changing cable connections please make sure that power to the unit is completely disconnected by switching off the power supply and unplugging the power cable from the wall outlet Maintenance and Service Remote Control eFunctions of remote control buttons The remote control is using Infra Red IR Point it towards the front of the TV The remote control may not work correctly if it is operated out of range or out of angle b POWER Turn the TV on back to Standby mode DIV USB INPUT AUDIO MUTE DTV USB Switch to DTV USB INPUT Display the input source menu AUDIO Select different audio languages subject to availability from broadcaster MUTE Press to mute the sound press again or press VOL to unmute PICTURE Press repeatedly to cycle through the available video picture modes SOUND Press to cycle through the different sound settings SLEEP Repeatedly press to scroll to preferred off time ASPECT Adjust picture size
23. ce down on a soft and flat surface blanket foam cloth etc to prevent any damage to the TV Put the neck onto the back of the TV set as shown below and attach the neck with the supplied screws 6xM4X14 When attaching make sure the screws are attached tightly If the screws do not attach tightly it will lead the TV to be unstable or may even tip over 1 Before you put on the stand please make sure the direction is correct as shown below 2 When you are putting on the stand please make sure the neck of the TV set is in the correct position and attached tightly 3 When attaching the stand make sure the screws are attached tightly NOTE If you do not attach correctly and tightly it will make the TV unstable and may tip over 3 Warnings 5 x ST4 x 28F a It can not be tilted to the front or back as b It can not be tilted to the right or left as shown below Doing so may damage the shown below Doing so may damage the stand stand Top View User Guidance Se mne 27 5 Recording Maintenance Basic Operation OSD Menu Information Operation and Service Accessories e The configuration of the components may look different from the following illustration User s Guide User s Guide Remote Contro
24. crew hole near the base in the back of the TV 3 Tie the wood screw or eyebolt to the machine screw with a strong cord C B 17 Alternatively secure the TV to the wall directly behind it by fixing eyebolts to the wall and tying them to screws fixed on the centre of the TV back panel How to mount the LED TV on the wall 1 After detaching the stand fasten 4 mounting screws thread size M6X10mm NOT SUPPLIED Please contact your local hardware store into the 4 screw holes on the rear cover see the figure below 2 Fasten wall mounting bracket NOT SUPPLIED with LED TV please contact your local hardware store with screws on the wall 3 Carefully check for the strength of the connection before releasing the LED TV NOTE For more detailed instructions please refer to your after market wall mounting instruction book 200mm Thread hole size M6 x 10mm depth TV mounting screw size on the TV 6 Fixing the stand 1 The parts needed for installing the stand supplied Before installing the stand please check that you have all of the parts and that there is no visible damage If a part is missing or appears damaged please contact customer service Ry My My 5 x STA x 28F om w SSS 6 x M4 x 14 Stand Screws supplied 2 How to install the Stand Place the TV fa
25. e menu select Media source by the A W buttons and press OK button to enter the Multimedia menu as shown below AV YPBPR HDMI HDMI2 HDMI3 PC Media 2 Insert USB device and select the Media mode form Photo Music Movie and eBook then you will find the name of the device display on the screen as shown below Photo ne ET Y WM 000 000 T MP M rZ Ch 1289 Ok Ext JE Hints for operation 3 Press A V button to select the USB device and press OK button to enter the file list as shown below Photo Return to device list 17 Tite Detur 6 ww 19 147 jpg Multimedia Operation x E 4 157 jpg ah Preview 162 jpg M Lx File list T463 jpg 014 122 JE 164 jpg EH 112 De Ea Informations 2 Rl m 1600x1000 ot Koenigsegg Agera R 2012 01 jpg o miD lele Ls Add Del to playlist pi IS o Ok A Hints Press buttons to move press OK button to select the file or unfold the folder Press RED button to delete the file Press GREEN button to sign or cancel all the files to playlist Press OK button to sign or cancel the selected file to playlist Press button to previous menu Press EXIT button to select the file view type list lt or thurnbnail gt Press Exit again to return to the root MENU Then press button to program the files be signed you select or the file
26. ess 5 Submenu T Colour 50 gt Picture menu imt E Tint 50 1 for example Feature Colour Temperature T 1 Aspect Ratio Full Hint you should operate eee Oe ee eee the OSD menu according v Move to the hint OSD Menu Use the lt gt direction buttons to make a selection from the main menu CHANNEL PICTURE SOUND Channel Feature Setup Press gt button to enter the submenu system Once in the submenu use V buttons to select an item Press the OK button to access the selected item to make changes to the settings m 5 Operation To return to the main menu press the MENU button To exit the menu display press the EXIT button NOTE e Some menu items can only be activated when the right INPUT selection has been made ie the CHANNEL selection can only be accessed under DTV and ATV input selections Operate the OSD menu according to the hints provided at the bottom of the screen Recording Operation Maintenance and Service 13 OSD Menu 1 Picture menu as vw P LV Picture Ey Picture Mode Er Brightness Contrast Sound Sharpness Colour Channel z Tint 50 gt Aspect Ratio Full gt Setup av Move Ok Enter Exit Menu Returr Description Picture Mode Select your desired picture mode from Dynamic Standard Mild and User Brightness Adjust ima
27. ge black level Contrast Adjust image contrast Sharpness Adjust the sharpness Gray and invalid in VGA PC mode Colour Adjust image colour from black and white Tint Control the tint NTSC mode only OSD Menu Colour Temperature Select an optimum color temperature mode to suit your eyes for viewing from Warm Cool Standard Aspect Ratio Change the aspect for the screen from 4 3 16 9 Zoo0m1 Zoom2 E 3 Noise Reduction If the broadcast signal received is weak you can select the Noise Reduction option to reduce the video noise level between Off Low Middle and High Backlight Adjust the backlight Recording Operation Maintenance and Service 14 OSD Menu 2 Sound menu EDI reme Sound Mode AE Treble Surround Off gt Channel AVL Feature SPDIF PCM gt Setup Description Sound Mode Select your desired sound mode from Standard Movie Music Speech and User Bass Adjust the level of the lower pitched sounds Treble Adjust the level of the higherpitched sounds Balance Adjust the audio output between left and right speakers Surround Turn on off the surround sound function Auto Volume Level AVL The volumes of all sources will be maintained when the function s on SPDIF Select the spdif mode for the TV from off PCM and Auto 15 OSD Menu m 5 Operat
28. imeshift Note a Please make sure the USB device is on the TV b Please make sure the speed and free space of the USB is enough c Press STOP button to exit the timeshift mode Do you want to stop Timeshift d Press PLAY button to play the program you are recording from the beginning and the timeshift will be going on e Timeshift time menu on the right top corner shows the fallen time between the current picture and the living broadcasting picture f During the recoding progress if the signal is missing the recording process will take a pause until the signal is stable again 26 Troubleshooting Do not use other functions that are not mentioned in this user manual f a problem occurs with your LED TV please take the following steps first f you still have the problem turn the power off and contact your dealer or an authorized service center Problem The picture does not appear The picture appears too slowly after the power is turned on Screen is too bright or too dark Screen is too large or too small Stripes appear on the screen and it shakes The screen does not move Screen appears but there is no sound Remote control does not work Picture is distorted USB not playing Action Is the power plugged in Insert the power plug Press the power button on the remote control Like your computer the TV has to run a number of diagnostic and software checks before i
29. in a poorly DO NOT run power cords near high voltage power lines and burning incense or lighted ventilated enclosure such as heat producing appliances such User Guidance Information cigarette on top of the unit cabinet as radiators stoves or irons communication cables Make sure DO NOT place the unit near i itis installed securely any heat source such as a fire so poses a serious risk uw Xeessive neat can IT the antenna touches a power line S place or space heater of and a possible fire the insulation and expose live contact with the antenna result _wires resulting in fire or electric fire electric shock or serious inj outbreak e Doing so poses a serious risk shock LY of overheating and a possible fire outbreak 22 IA 522 J i oo a 2 7 OSD Menu Be sure to place the unit ona level surface Do not cover the unit with a tablecloth curtain or other material Insufficient ventilation may result in the unit overheating which may cause a possible fire outbreak Install the unit at an adequate distance from the wall to ensure sufficient ventilation Insufficient ventilation may result in the unit overheating which may cause a possible fire outbreak Se 9 Es g 5 so
30. ion Recording Operation Maintenance and Service OSD Menu 3 Channel menu In ATV DTV mode mud Channel Management ENTER Favorite Management ENTER gt S 1 Country Australia Sound Auto Search ENTER gt DTV Manual Search ENTER gt Channel E _ ATV Manual Search ENTER gt Feature Setup av Wove Enter ag A Menu Re Description Channel Management Enter the Channel management menu to edit the channels Channel Channel Manager TT Name BBC TWO ANTENA 3 ANTENA NEOX ANTENA NOVA GOL TELEVISI N ONDA CERO mmm E De Loc Skip m Swap Delete Press RED arr to sign the channels you want to delete it will hint you when you exit Lock User must set the Lock enable Feature Lock Lock enable at ON to active this function Press GREEN button to sign lock or cancel unlock the channel And you have to enter the password to view the program Skip Press YELLOW button to skip the channel or cancel the setting and the program will not be programed by CH button Swap Press BLUE button to sign the channel press V button to move and press OK button to swap the position Favorite Management Add or remove favourite channels by the colour buttons Up to 4 favourite lists are available RED Fav1 GREEN Fav2 YELLOW Fav3 BLUE Fav4 OSD Menu Operation im 5 Favi Fav2
31. l 2 X AAA Battery Quick Start Guide Contact Card Stand Cover for Wall mounting Names of each part Front View Basic Operation OSD Menu Multimedia Operation INPUT MENU Led Indicator Remote control window keep clear D 6 5 o9 0 o2 Z oO INPUT Display the input source menu MENU Display exit the OSD menu CH Scan through channels VOL Adjust the volume POWER Turn on standby the TV set Maintenance and Service Names of each part Back View c M Pr Y 7 Y 9 7 v Wirnnnnnn und 4 V j ON NS PC IN 1 1 nar Tn 6 nnm hon o 2 7 po 4 HH SHH gl cp agg uns H L _ H GHHHHEEER 2i 2 eO I AC POWER IN Headphone out o 9020 Basic Operation Video R in L in HDMIA AC POWER IN Connect to AC power supply SWITCH Turn on off the power supply COAX Digital output to AV receiver Q Headphone Connect to your headphones or other audio equipment RF Connect an antenna or a 75 Ohm coaxial cable to receive a TV signal VIDEO Connect to video output terminal of external devices R L in Connect to the
32. n unused for long periods of time 13 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this unit This symbol indicates that there are important operation and maintenance instructions in the literature accompanying the appliance NOTE a To prevent damage which may result in fire or hazards the unit should not be exposed to rain or liquids b Do not place objects containing liquids such as vases on the unit If drinks or liquids have been spilled on the unit unplug the unit from the power source and refer to TEAC service personnel for assistance C Servicing of this unit should be conducted by qualified and certified TEAC service personnel d The manufacturer will not be held responsible for any damage caused by any modifications done on the product without authorisation from the manufacturer s authorised service agent Basic Operation OSD Menu ty 3 Recording Operation Operation Maintenance and Service Basic Operation OSD Menu P 5 Recording Operation Maintenance and Service Wall Mounting Information Stand and wall mounted optional Your LED TV is able to accommodate wall mounting with the use of a wall mount bracket not supplied with LED TV please co
33. nput Mode 19 OSD Menu m 5 Operation Recording Operation MEUA and Service OSD Menu 5 SETUP menu OSD Timer PC Setup Picture 3 Blue Screen Off Sound Restore To Default ENTER b System Info ENTER 4 Channel Feature Description OSD Timer Lets you adjust the amount of time the On Screen Menu stays on the screen before disappearing PC Setup Change the PC Settings in PC mode iii Setup PC Setup Auto Adjust kj H Position Picture mE S V Position Sound Phase Clock Channel OSD Menu M Feature E Auto Adjust Setup the parameter of the screen automatically H V Position Adjust the transverse vertical position of the screen Phase Adjust the phase of the ADC sampling clock relative to the sync signal until a stable image is obtained Clock Adjust the pixel clock frequency until the image size is maximized for the screen Recording Operation Blue Screen Changes the background when there is no input between clear and a blue background Only available in some sources Restore To Default This clears all the TV settings for the television System Info Diplay the TV system information and custom support information Maintenance and Service 20 Multimedia Operation Basic Operation 1 Press the INPUT button on the remote control to display the input sourc
34. ntact your local hardware store and the mounting hole screw size 6 10 on the back of the unit We recommend removing the TV stand prior to mounting the TV on the wall Please refer to the figures and procedure below How to remove re install the stand Follow the instructions below to remove the base of the TV 1 Place the unit face down on a soft surface 2 Loosen and remove the 4 screws securing the stand to the TV shown on right 3 Gently remove the stand 4 Insert the stand Cover for Wall mounting in the bottom of the TV Attach the Stand Cover with the supplied screws 5 To reinstall the stand place the unit face down on a soft surface and reverse the above instructions fog N A F i IN d c S E T 2 IE s c S IBI s a ge e js e 9 JN a Il e E ___ Stand Stand Cover For Wall mounting NOTE Make sure the power is completely disconnected and unplugged before starting Fall Prevention To prevent the TV from tilting forward and falling over to cause damage or injury please secure the TV to your table or wall using screws or eyebolts and strong cord not provided An example on fixing the TV to a table is shown below 1 Install a wood screw or eyebolt into the table that is supporting the TV 2 Fixa machine screw into a s
35. r function Type Select the type of the program you want to recording Channel Select the channel you want to recording Start Time Setup the start time for recording the program Duration Setup the duration time for recording Date Select the date for recording Mode Select the mode for recording 5 Record List Display the Record list menu zZDOO D8 19 14 4718 14 47 44 2009 06 19 14 41 52 14 42 08 BBC NEWS 24 ZDOO0BSIOZI20 12 090 00 12 09 55 Delete Press RED button to delete the selected record plan 6 Recorder Start Press OK button to start recording as the function of the REC button on the remote control EPG and Timer Record Press EPG button on the remote control to display the EPG menu 1 V 07112 2005 18 38 07 12 2005 18 15 07 12 2005 19 03 Sydamen asialla Likainen Len Mike tutkii onko maatyolaisen kuolemalla yhteytt lukuisiin el inten kuolemiin Alfred saattaa Davidin nousuveden vangiksi Stereo Wed 07712 YYLE TV2 IERRA EAEE No Event Info 2 my YLE FST MI Koulu tv Nain tehtiin Ullakkokomppania 8 YYLE24 7 No Event Info 9 YYLE Teema yaehelemy eher Tv uutiset 30 CBBC Channel 55 4 3 Event Info 40 BBC NEWS 24 y kt El m ntaito i Recorder Ell Reminder EB Prev Day E Next Day Display Info z Exit av lt gt Move Recording Operation EPG mode Press RED button to change the EPG display mode Daily mode shows the inform
36. revent property gt Pulling on the cord damage d the internal wire Be sure to read and observe all safety and may result in a fire f precautions It is the responsibility of the user to make sure all precautions and warnings are heeded and followed Recording Operation Maintenance and Service Installation Warnings a UOO b p OQ DO NOT use or store flammable DO NOT place the unit on an unstable combustible materials near Surface such as a sloped table or any the unit stand with a contact area smaller than _the bottom surface of the unit stand DO NOT place containers with DO NOT place the unit where liquids such as vases drink cans _ it is exposed to rain excessive bottles or small metallic objects moisture or grease on top of the unit Doing so may result in fire or explosion Doing so may result in fire _ electric shock malfunction or deformation Placing the unit on a flat stable surface prevent accidents from happening Ignoring this precaution may result in the unit toppling over and causing injury If liquid enters the unit or any metal object falls into the unit it may result in a short circuit fire or electric shock 9 g Install the antenna away from DO NOT place a burning candle DO NOT place the unit
37. s in the fold you select Press STOP button to stop and exit the full screen program please notes the hints on the bottom T F O wf IE ce 21 Multimedia Operation 1 Photo Play the photo E 8 Press 4 gt button to select the option the table and press OK button to change Note You could press OK button to display the option table when it disappears 11 Play Pause the photo playing Stop and exit the full screen program 4 gt Play the previous or next file directly Ratate the picture 0 90 180 270 Zoom in out the picture you could move the picture by Cursor left right up down button in Zoom mode Q Display the information of the current file 5 Display the photo setup menu and select the Repeat mode Background Music Slide Time Effect Ed Display the playing list 2 Music Play the music Music Player Gerral Girls love Wind gt Swiff 5 55 E 3 gt 00 00 08 00 03 20 S au Press gt button to select the option on the table and press OK button to change 1 Play Pause the music playing B Stop and exit the music playing 44 gt gt Play fast backword or forword 4 gt Play the previous or next file directly Input the time and start playing directly select the repeat mode for playing music owitch the window between
38. t can display any broadcast channels The picture should appear in approximately 15 seconds Perform brightness adjustment or contrast adjustment Adjust the aspect settings Keep any appliances that emit magnetic radiation away from the TV Press the PAUSE button Check if the Pause button is pressed on external equipment 1 Check if the MUTE function has been activated 2 Increase the sound level by pressing volume adjustment button 3 Check if sound terminal of external input is connected properly 4 Check if audio cables are connected properly 5 Select and check the other input If the sound still does not work and the other channels are the same after you have done as the above contact your dealer or an autorized service center 1 Check if main power is On 2 Check that the batteries of the remote controller were loaded properly 3 Check to see if any obstacle exists between the LED TV and the remote control then remove it if any 4 If the batteries have no power replace them with two new batteries Compression of video contents may cause distortion especially on fast moving pictures such as sports and action movies Low signal level can cause picture distortion This is not a TV issue Have the antenna assessed Please check if the USB is connected properly Please make sure USB disk is compatible and the multimedia data formats are supported see Specifications page 2f Q T F 9 wf fs
Download Pdf Manuals
Related Search