Home

USER MANUAL - Coffee Machines

image

Contents

1. To rinse run this full tank of water through the espresso machine by double pressing and releasing brew button C 2 times repeatedly TROUBLE SHOOTING No function Little or no froth is being produced Coffee is not hot enough The indicator light will illuminate but espresso does not flow Water under the machine The espresso machine is whistling softly Produced little or no Crema The water does not flow through the espresso dispensing nozzle L The brew button C D E starts flashing for a long time When is the espresso machine ready for use The espresso capsule does not fall automatically into the capsule container H when I open the lever A The espresso capsule does not insert correctly What are the espresso machine default settings What happens if another key is pressed during distribution of the brew cycle PH 1800 800 255 bluepod com au Make sure the power cord is properly inserted into the unit and wall outlet and the On Off button K on the left of the machine is turned on Remove pin O wipe clean and replace Heat your cup prior to use by filling with hot tap water Let it rest for 10 seconds and then empty prior to making coffee The espresso dispensing nozzle L is clogged The loaded espresso capsule can be damaged Wait for a short period of time before opening the lever and then try with a new capsule Make sure that the
2. Do not move the machine whilst it is switched on During movement hot liquid may spill out of the machine Avoid spillage on the connector PH 1800 800 255 bluepod com au Always allow the machine to cool down before cleaning Do not allow the cord to hang over the side of the bench whilst the machine is in use This presents a risk that the machine could be pulled off the bench possibly causing burn injuries particularly to small children OBEY THE FOLLOWING INSTRUCTIONS TO PREVENT DANGEROUS SITUATIONS Note the information on the setup location ELECTRICAL CONNECTION using an extension cable double adaptor or outlet strip The power cord should not be pulled taut The electrical safety of the machine is only ensured if it is connected to a proper ly installed protective ground system PH 1800 800 255 bluepod com au continued Operating the device from an outlet with out an earth conductor is forbidden If in doubt have the home wiring checked by a licensed electrician We do not asume any liability for damages caused by a missing or interrupted earth conductor Packaging material must not be used for playing There is a risk of suffocation Packaging materials can cut cause injury if not handled carefully or if used incorrectly as well as on the electrical connection of the machine to prevent personal injuries and property damage Beware that potential injury may occur from
3. TECHNICAL DATA Model Easy Touch Operating Voltage 240V AC Frequency 50 Hz Power con MAX 1500W Water tank cap 700ml 0 7L Weight 5 0 kg Size L 350 W 155 H 245 mm This appliance has been tested and certified according to Australian electrical safety and EMC requirements WARNING Obey the following instructions when cleaning and caring for the machine Disconnect the machine from the power supply before cleaning Allow the machine to cool down before cleaning Do not use any abrasive cleaning agents or solvents Never immerse the machine power plug or plug in water or other liquids Do not clean the machine or any parts thereof in the dishwasher PH 1800 800 255 bluepod com au SAFETY WARNINGS Read this user manual carefully before using your new Easy Touch for the first time Please keep the manual where you can easily find it and refer to it in the future It is very important to keep the box safe in case it is needed to return the machine for repair INTENDED USE This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops offices and other working environments farm houses by clients in hotels motels and other residential type environments bed and breakfast type environments Any other or additional use is not intended The machine is designed to make coffee using LAVAZZA Blue capsules Other capsules will not fit DANGER FROM ELECTROCUT
4. press and release brew button again and repeat 3 times Beware of steam amp hot water exiting milk amp espresso nozzle G and L Pull out the frother pin B and clean it carefully with a wet sponge and warm water and then replace Frother Pin back into unit Please note the Frother Pin B is only for cleaning purposes It is recommended on a regular basis you dissassemble the milk tank and lid into 4 parts and wash them carefully with warm water DISCARD LEFT OVER MILK IN CONTAINDER AFTER 2 DAYS ALWAYS PLACE MILK CONTAINER IN FRIDGE WHEN NOT IN USE ALWAYS STORE MILK AT OR BELOW 4 C PH 1800 800 255 bluepod com au CLEANING IF MILK FROTHING DEVICE IS BLOCKED If you cannot prepare cappuccino or caf latte because no milk frothing is possible Please use following instruction to clean the device and it parts thoroughly Q Milk frothing device housing upper part R Milk frothing device housing lower part B Frothing pin S Frothing part PH 1800 800 255 bluepod com au CLEANING IF MILK FROTHING DEVICE IS BLOCKED continued Pull out the frothing pin B Remove the main frother device by pressing in gently each side of the unit and then pulling towards you Pull out frother part S of the milk frothing device housing Seperate milk frothing device housing Q in upper and lower part R Wash parts S B by hand with warm water Do not remove the silicone f
5. tank M with fresh cold water and if making a cafe latte or cappuccino fill the milk tank F with fresh cold milk Turn the espresso machine on K open the lever fully A insert the Lavazza Blue espresso capsule close the lever A fully wait until the LCD Screen displays Please Select approx 70 seconds NOTE There may be slight deviations in the set brew times due to different coffee varieties or water hardness Press the brew button once C The espresso machine is already programmed for a 40 ml espresso Press brew button C twice within 2 seconds The espresso machine is programmed for a 180 ml lungo Press the brew button D once The espresso machine is already programmed for the perfect cappuccino PH 1800 800 255 bluepod com au Press the brew button E once The espresso machine is already programmed for a perfect cafe latte DISCARD LEFT OVER MILK IN CONTAINDER AFTER 2 DAYS ALWAYS PLACE MILK CONTAINER IN FRIDGE WHEN NOT IN USE ALWAYS STORE MILK AT OR BELOW 4 C ADJ USTABLE CUP PLATFORM The cup platform is adjustable to accommodate various cup sizes Remove the grid on the lower cup platform to accomodate a larger cup Remove the upper cup platform I and grid and set aside PH 1800 800 255 bluepod com au STAND BY MODE Stand by mode extends the life of your Easy Touch For a longer lifetime of your Easy Touch it will automatically switch into A th
6. ION RISK OF BURNING GENERAL SAFETY INSTRUCTIONS This appliance is not intended for use by Please contact our Customer Support persons including children with reduced Line to arrange To avoid damage to the physical sensory or mental capabilities power cord unwind the cord fully before or lack of experience and knowledge use always remove the product from unless they have been given supervision the power supply by pulling on the plug or instruction concerning use of the itself not the cable and do not carry the appliance by a person responsible for machine by the cord Unwind the cord fully their safety before use always remove the product from the power supply by pulling on the Children should be supervised to ensure plug itself not the cable and do not carry that they do not play with the appliance the machine by the cord Before using the machine inspect it for visible damage to the housing lever Do not place the machine on hot surfaces water tank power cord and plug such as stove tops Do not use the machine if it is damaged call our Customer Support Line immediately Repairs of this machine must only be done through authorised service centre PH 1800 800 255 bluepod com au GENERAL SAFETY INSTRUCTIONS continue CAUTION Only operate the machine on a flat while the machine is switched onor stable and heat resistant surface away working Never immerse the machine from water splashes Do not move power plug in l
7. Please Select When the control LCD displays Please Select approx 70 seconds press brew button and release E to flush system Wait until the water cycle finishes Repeat the process twice before use WARNING Steam will be dispensed from G PH 1800 800 255 bluepod com au DAILY USE The Easy Touch Machine is pre programmed with three default settings Before making a coffee the following instructions must be followed Fill the water tank M with water and the milk tank F with fresh cold milk Plug in the connection plug Ensure that the espresso machine has been switched on or in standby mode Exit standby mode by opening the lever A Your espresso machine is ready to be used when the LCD displays Please Select If the machine is turned off switch the ON OFF button K and wait until the LCD displays Please Select Open the lever A fully and insert an espresso capsule Then close the lever A fully FOLLOW INSTRUCTIONS ON NEXT PAGE FOR A COFFEE PREPARATION NOTE The device is intended for normal household use The machine can be overheated if you prepare directly more than 10 espresso s repeatedly The capsule container tray H and drip tray 1 must be emptied and rinsed out regularly WARNING Using the machine when the water tank is empty is not recommended PH 1800 800 255 bluepod com au HOW TO OPERATE Before output Fill water
8. e stand by mode after 9 minutes of inactivity The espresso machine is turned on and one or more espressos are generated a If you do not use the machine within 9 minutes it automatically starts the stand by mode LCD will display Stand by Standby Exit standby mode by opening the lever A Your espresso machine is ready to be used when the LCD displays Please Select If you want to switch off the espresso machine completely then switch the ON OFF button K to the OFF position WARNING Easy Touch Espresso Capsule System is designed to be used ONLY with Lavazza Blue capsules PH 1800 800 255 bluepod com au HOW TO CLEAN THE UNIT DAILY ROUTINE To be done daily when machine is in use Switch the Power switch I to turn the unit OFF o Remove the water tank M and the milk tank F Fill the water tank and milk tank with cold water and place on machine Empty and rinse out the used capsule container H drip tray I upper cup and the lower cup J Replace parts back into the machine To make sure there are no capsules in the capsule compartment open and close capsule lever A Make sure the lever is lowered A Please cup or container under nozzle G Press the Power switch o to turn the unit ON I Wait for LCD screen to display Please Select Press and release brew button E Please note that the machine will only dispence 300 ml approx at one time so
9. iquids WARNINGS Danger from unintended use If the machine is not used as intended and or used differently than intended this may result in danger to the user Use the machine only as intended Follow the warnings and instructions outlined in this user manual DANGER a repair There is a danger of Obey the following safety instructions electrocution if voltage carrying to prevent danger of electrocution contacts are touched and or the If the appliance iS damaged electrical and mechanical construction immediately cease use and contact is modified In the case of an our Authorised Service Centre emergency Do not use if the power cord or plug immediately remove the plug from is damaged These must be replaced the power socket by the manufacturer its service agent Always remove the plug from the or similarly qualified persons in order power socket prior to cleaning the to avoid a hazard machine Do not use the machine with bare feet and wet hands Never open the machine to diagnose a problem or attempt WARNINGS Parts of the machine may become very hot during operation Heating element surface is subject to residual heat after use Obey the following Safety instructions to prevent scalding or burning yourself and or others Do not touch the hot parts coffee nozzle after using the machine Whilst brewing coffee be aware that hot coffee may splash Do not open main lever while making coffee
10. lever A is closed The capsule container may be full and should removed from the unit for at least 5 seconds to reset the counter and empty the used capsules Make sure that the water tank M is installed correctly CAUTION When refilling the water tank M always turn off the power and then remove the tank and fill it Otherwise water may leak from the back of the unit This is not a fault but normal action of the pressure control valve Coffee has natural occurring oils which may clog the espresso nozzle To clean regularly run a brew cycle with water only Coffee has natural occurring oils which may clog the espresso nozzle To clean regularly run a brew cycle with water only The espresso machine takes approximately 70 seconds to heat up The capsule container H may be full Please empty it or make sure the capsule lever is fully open The capsule container H may be full Please empty it or make sure the capsule lever is fully open The One Touch Barista Capsule System is preprogrammed with four default settings A single press on brew button C will deliver a 40 ml espresso A double press on brew button C will deliver a 180ml lungo A single button press for brew button D will deliver a delicious cappuccino and a single button press for brew button E will delivery a rich cafe latte Coffee distribution is interrupted in advance
11. misuse of appliance OBEY THE FOLLOWING SAFETY INSTRUCTIONS TO PREVENT PERSONAL INJ URY amp PROPERTY DAMAGE Before using the machine inspect it for visible damage to the housing lever water tank milk container power cord and plug Do not use the machine if it is damaged call our Customer Support Line immediately Make sure the machine is turned off before plugging it into the socket outlet Do not stick any objects or body parts into the machine during operation Do not leave the machine unattended during operation Do not move the machine during operation Do not place anything on top of or cover the machine during use Always unplug the machine from the power socket after using it Do not leave the machine without water in the tank SAVE THESE INSTRUCTIONS Technical Data Model Easy Touch Type IDMP17S 240 Vac 50 Hz 1500 W Made in China ELECTRICAL CONNECTION To ensure the safe and correct operation of the machine the following instructions must be observed when connecting it to the power supply This machine is rated at 220 240V 1500W Prior to connecting ensure that this is compatible with your power sup ply Make sure that the power cord is not damaged prior to use and that it cannot come in contact with hot surfaces or sharp edges The machine may not be connected Nl A Lever for opening and closing the lid B Rotary knob C Brew Button Esp
12. resso amp Lungo D Brew Button Cappuccino E Brew Button Caf Latte F Removable milktank G Milk nozzle H Capsule container I Drip tray grid Upper Cup Platform for small cups J Lower Cup Platform for large cups K ON OFF Button L Espresso nozzle M Removable Watertank N LCD Display Screen PH 1800 800 255 bluepod com au BEFORE FIRST USE The product should contain all of the following components at the time of purchase Coffee machine including water tank and drain tray User manual Milk canister Inspect the delivery for completeness and visible damage If the product is incomplete or damaged please call 1800 800 255 or email sales bluepod com au immediately and do not use the machine Before using the machine for the first time clean it as described under the heading How to clean coffee machine before first use HOW TO CLEAN COFFEE MACHINE BEFORE FIRST USE It is important you clean the unit before first use Please note the first time the machine is used there may be an odour caused This is entirely normal and will disappear after a few minutes Rinse removable water tank M and milk tank F with warm water Rinse thoroughly Fill water tank M and milk tank F with cold water Place a container or a large cup under the espresso nozzle G Plug in the connection plug Turn the ON OFF switch to ON position K and wait until the LCD displays
13. rom part R tube If blocked rinse all of part R thoroughly with warm water Assemble all parts in proper order and install housing assembly onto the unit and gently insert frother pin B correctly for proper operation PH 1800 800 255 bluepod com au DESCALING WARNING Any traces of lime scale naturally present in the water may seriously compromise correct operation of the machine The manufacturer recommends descaling regularly every 3 to 6 months IMPORTANT The company will not be held responsible for intervention covered by a warranty for espresso machines that are broken or do not work correctly due to the fact that the user has not carried out the descaling procedure Switch the Power button K to turn the unit OFF o Fill the water tank M with 0 8 L warm tap water and place back on the espresso machine Switch the Power button K to ON Pour ExpressoKleen 40g sachet available on bluepod com au into water tank Stir until disolved Take care not to splash Follow the safety directions on the packet Place a large cup on the drip tray grid J Press and release the brew button C twice After 10 minutes press and release the brew button Long twice to run the remainder of the water through the machine Repeat with remainder of water Remove the water tank M and rinse thoroughly Fill the water tank M with 0 8 L warm tap water and place back onto the espresso machine

Download Pdf Manuals

image

Related Search

Related Contents

  取扱説明書  参考資料 - 古河電気工業株式会社  + + ULTRAGLIDE EASYCORD  Home Network Connection Center Owners Manual - ps  Scosche QUSBH mobile device charger  VT64 WorkStation 9500 X  A L2 - Flotec  Samsung Star WiFi  

Copyright © All rights reserved.
Failed to retrieve file