KGNFHDLEDH40VA USER MANUAL
Contents
1. EN 5 Digital LED LCD Television Instruction Manual About your LED LCD TV Installing your TV on the wall 1 Carefully place the TV screen face down on a soft surface or table covered in a cloth We suggest that you place the wrapping material from the TV package on the table top to protect the screen from damage LI 2 Position the cover over the stand aperture and secure with the 5 cross head screws supplied 3 32 FHD Digital LED LCD TV Attach the wall mounting bracket not supplied to the back of the TV using 4 x 4mm screws not supplied Fit the TV to the wall referring to the wall mounting manufactures instructions WARNING Take secure when fitting the TV to the wall TV is heavy 3 40 FHD Digital LED LCD TV Remove the 4 blanking screws from the TV 4 X wallmounting points 4 Attach the wall mounting bracket not supplied to the back of the TV using 4 x 6mm screws the screws supplied with the TV may not be long enough select suitable screws to securely fit the wall mounting Fit the TV to the wall referring to the wall mounting manufactures instructions WARNING Take secure when fitting the TV to the wall TV is heavy Digital LED LCD Television Instruct2. kogan KGNFHDLEDH40VA USER MANUAL Contents Content Safety Warnings 2 Operations a e a 15 WELCOME USING YOUR TY sivcsssssccsccssscnscssscecccscosscesscsssaccssese 15 E A RN AE ia How to select the TV program scsssssssessessseessesseeeee 15 IMPORTANT INFORMATION ceccsssessrscceseees 2 HOW to adjust VOIUME ccsssessssssessssesecsssesscseseessseeseens 15 CHLIST TURCO Merine aa 16 About your LED LCD TV gt ADJUSTING PICTURE SETTINGS ccsscscoeeees 16 INSTALLING THE STAND ccccccccccocecccccccccccccccccsces 5 Changing the Picture Setting ssssssesssesssseseseseseeeeereeeees 16 Install you TV on the walll cccccccscccsesseeees 6 matte ton eats PO gree aoa 16 Changing the Sound Setting s essessessssssessessesseessessesses 16 a A ew atireestepranesenesereesevegatieT 7 FUNCTION SETTINGS csssssssssssssscscsssssssssnssscsee 17 Frontcontrol panel missiekenana 7 TIME SETTINGS oeoeccecececcececcececcececcccecececceceseccesess 19 Rear Terminals Control es sesesesessseesssessseessseessessseeosseesseess 7 GET TO KNOW YOUR REMOTE CONTROL g LOCK MENU SETTING cccssccccsscrccesscecers 20 CONNECTING YOUR TV cccssssssessessssssssssescesecoees 9 SHORTCUT MENU DISPLAY ssrrsresssseseesesseees 21 ANTENNA CONNECTION esssssssccssssseeesnsseersnssecerensseerensee 9 Using the features ccccccccssescees 23 IMPROVE YOUR SIGNAL cssessssesssssssssssecess
3. press 4 gt to select Text A Press OK to confirm the selection and enter the text file list E Press and OK button to select the text you want to play and then press PLAY PAUSE button to play the text Press PREV NEXT to select the last or next text Using the features QO Toexit the Text mode just press BACK repeatedly P Note L You can enjoy the music and the text at the same time USING EXTERNAL USB DEVICE FOR RECORDING E Press the Source button and pressa w buttons to select TV and press the OK button Language English Subtitle Language English Display Mode 16 9 Blue Screen Off Recorder SCART Input AV OSD Time Out Off OSD Transparency Off Reset mJ Picture s Sound a HTa aa e Time B Lock Y Note _I Only USB1 is available for recording F Insert the USB device with FAT32 format into theUSB1 connector Then press MENU button E Press button to select FUNCTION menu pressthe OK button to enter 4 Press a w buttons to select Recorder Press OK button to enter the submenu Menu select Disk USBI C Check File System start USB Disk Format Time Shift Size Speed E Press button to Select Disk and press orOK button to enter Press 4 button to select disk if your device has several disks Digital LED LCD Television Instruction Manual EN 26 Using the features P Note L If this is not the first time t
4. the stored files or the USB storage may become damaged Operating the USB device Press to scroll through main menu or submenu and select your desired option Press OK to confirm your selection Press 44 gt gt to achieve the FWD fast forward and REV fast back of the option being played Press PLAY PAUSE to play and press it again to pause playing Press ZOOM to magnify pictures when the picture is enlarged press 4 gt and to move the picture c3 an D wo Press STOP to stop playing or return to the previous menu and press BACK repeatedly to return to the main menu RA Note L You can choose the photos or music in different files to play together Playing a Picture O After entering USB main interface press 4 gt to select PHOTO item A Press OK to confirm the selection and enter the picture file list E Press to select the picture you want to play press OK to confirm and then press PLAY PAUSE button to play the pictures EN 25 Digital LED LCD Television Instruction Manual g If you want to pause the picture which is being played press the PLAY PAUSE button again Press ZOOM to magnify the picture When the picture is enlarged press 4 gt and to move the picture Press PREV NEXT to select the last or next picture Press to rotate the picture Press
5. Press 4 button to select Time menu press v button to enter Repeat Hour Minute ml Picture s Sound 3 Tuning 3k Function Time a Lock E Press button to select Off Time item press gt button to enter setting Press w button to select Repeat option and then press gt button to set it on Pressa w button to select hour or minute press 4 gt button to adjust the value When the off time has arrived the TV set will enter into standby mode Sleep The sleep timer automatically shuts off the TV after a preset time from 5 to 240 minutes g Press the MENU button and then use 4 gt button to select the Time menu Clock 00 00 Date n Off time Off Sleep lt Off gt Time Zone lt LondonGMT gt ml Picture T a HT aa Time MM Lock 2 Press the button and then use a button to select the Sleep E Press the 4 button and then use 4 button to select the number of minutes Select Off 5Min 10Min 15Min 30Min 45Min 60Min 90Min 120Min 180Min 240Min O when you are satisfied with your choice press MENU button to return to the previous menu or press the EXIT button to return to TV viewing And the time begins to count down from the number of minutes selected lt Time Zone g Press MENU button Clock 00 00 Date 2a ee Off time Off Sleep lt Off gt Time Zone lt LondonGMT gt mJ Picture s Sound Tuning y amp Function Time MM Lock Press 4 gt button t
6. STOP W to stop the picture being played HB Toexit playing just press BACK repeatedly RA Note _I The menu display varies with the photo name and pixel in your equipment Playing Music E After entering USB main interface press 4 gt to select MUSIC 2 Press OK to confirm the selection and enter the music file list E Press a and OK button to select the music you want to play then press PLAY PAUSE button to play the music Press 44 to achieve the REV fast back and FWD fast forward of the music being played Press PREV NEXT to select the last or next music Press STOP W to stop the music being played when the current interface is the music being played GQ Toreturn to the main menu just press BACK repeatedly RA Note L You can enjoy the music and the picture at the same time Playing a Movie O After entering USB main interface press 4 gt to select Movie 2 Press OK to confirm the selection and enter the movie file list E Press and OK button to select the movie you want to play and then press PLAY PAUSE button to play the movie Press ZOOM to magnify the picture Press PREV NEXT to select the last or next movie Press STOP W to stop the movie being played O To exit playing just press BACK repeatedly Text E After entering USB main interface
7. download and your TV set will go back to the DTV source Press EXIT to cancel download Updating in progress Do not tum off the TV fJ After the download has finished your TV set will enter configuration state and the indicator light is shining The menu 4 of right appears The set will be back the DTV source when the update is completed USING YOUR TV How to select the TV program g Using Program number button Enter the channel number with the number keypad on the remote control Fl Using P P button Press the P P button to select a channel number HOW to adjust volume Press V V button on the remote control or the side of the TV to adjust the volume level CH LIST function Press CH LIST button on the remote control will display Channel List menu and then press w button to enter Pressa w button to select the channel and then press OK button to enter ADJUSTING PICTURE SETTINGS Changing the Picture Setting g Press MENU button Contrast Brightness Colour Sharpness Tint Mode Colour Temperature Noise Reduction Reset Standard Cool standard VVVVVVVV lt lt lt lt lt lt lt lt 2 A Im Picture a Sound Tuning Y amp eFunction Time fH Lock Press 4 gt button to select Picture menu press v button to enter Press w button to select the item requires adjusting Press 4 gt button to adjust the selection item When you are sat
8. turn the TV set to avoid the direct light source Do not put the remote control in direct heat or ina damp place as you may damage the remote Please use two AAA 1 5V batteries Do not mix battery types Install the batteries at the correct polarities Do not use rechargeable batteries If your TV is to be stored for a period of time remove the batteries from the remote control Getting Started SETTING UP LOCATION You will need to place your TV near your plug socket so the power cable can comfortably reach and within reach of your aerial socket or extension lead CONNECTION 1 Insert your TV aerial lead into the Antenna input at the side of the TV Insert the batteries into the remote control Make sure they are inserted the right way around matching the polarity as indicated inside the battery compartment SWITCHING YOUR TV ON Connect your TV to the mains electrical supply Note The red light at the bottom of the TV will be on whenever the TV is in standby and there is power to the TV Touch the POWER button on the right side of the TV Digital LED LCD Television Instruction Manual EN 10 Getting Started once The red light at the bottom of the TV will flash for a few seconds and then the picture will appear EJ With the TV connected to the mains electricity supply press the red POWER button on the remote control The red light at the bottom of the TV will flash for a few seconds and then t
9. ART Input AV OSD Time Out Off OSD Transparency Off Reset Im Picture m Sound Tuning yeFunction Time ff Lock OSD Transparency To set the transparency background of OSD the transparency will be set in sequence Off 25 50 75 100 Reset To recover to the default value Digital LED LCD Television Instruction Manual EN 18 Getting Started TIME SETTINGS Clock g Press MENU button F Press 4 button to select Time menu press v button to enter E Press button to select Clock item press gt 00 00 OK Im Picture s Sound fgg Tuning Ik Function Time Lock button to enter setting Press a w button to select hour or minute press 4 gt button to adjust the value Date g Press MENU button F Press 4 button to select Time menu press v button to enter Clock 00 00 Date are pe Date lt 02 gt Timez Month lt 3 gt Year lt 2009 gt Close Im Picture s Sound Tuning K Function Time ele E Press button to select Date item press gt button to enter setting Press w button to select the option and then press 4 gt button to adjust value P Note L In DTV mode because the time information is from the signal the Clock and Date are not able to be changed If you want to change the time turn off the TV in EN 19 Digital LED LCD Television Instruction Manual ATV mode then turn on the TV Off Time g Press MENU button F
10. IT button to make the recording interface minimum OPEN CLOSE INFO PMODE S MODE SLEEP AUDIO SUBTITLE CH LIST OO Recording 5 five 15 06 00 00 00 The streets of SAN francisco 384MB fl Press STOP button to stop the program recording being played E For Playback of the recorded program Press INDEX button to open the recorded list Recorded List Gold workshop wit Gold workshop wit peier INDEX gt Press a w button to select the content you recorded Press the gt button to display the program information DATE 2004 03 01 TIME 14 56 09 DURATION 0000 00 00 CHANNE NAME 16QVC PROGRAM NAME Gold workshop with jan Springer Press 4 button to cancel Press OK or PLAY PAUSE button to play the program recorded and press STOP button to stop it Using the features PLAYBACK 14 51 IIIT II OOOO _ Al B 00 00 12 00 10 00 5 FIVE Gold workshop with jan Springer P Note L Changing the channel will not influence the recording in the same frequency but will influence the time shift When the recorded program is being played you can not delete it _I Press the INDEX button repeatedly the program will be displayed in the order of program name channel name program time file name and file length Note The TV needs to be ON when recording You cannot schedule recording and put the TV in to standby mode Digital LED LCD Televisi
11. QD DEL EV FWD P R SETUP TLE SEAR Ghata PROGRAM A B ANGLE D CALL RA Note L RED button GREEN button BLUE button and YELLOW button are fast text button in analog signal Function button in DVBT just reference the OSD SOSOPVDOHHOG OCHO OP OHO VO OO OO MV MDODODOGVOOOQOQOOHOLOHO POWER DVD Menu REC DVD open close Picture Mode Sound Mode Call Screen Display Sleep button DTV Audio NICAM DVD Audio Aspect Ratio Control button Channel list button Subtitle button Program Number Channel selection Source Exchange Q VIEW Swap Channel V V Volume selection P P Channel selection Mute Menu button GUIDE button only for DTV Favourite list button OK button Cursor Mover button Back button only for USB Exit Screen Display REPEAT only for DVD amp USB CANCEL button Zoom only for DVD amp USB Teletext index only for TV REC index Play Pause button only for DVD amp USB Timeshift Stop only for DVD USB REC amp Timeshift Fast Reverse only for DVD USB REC amp Timeshift Fast Forward only for DVD USB REC amp Timeshift Previous only for DVD USB REC amp Timeshift Next only for DVD USB REC amp Timeshift DVD Set up Text DVD Title Teletext Mix DVD Search Teletext Subcode DVD 10 Teletext Hold DVD Program Teletext Reveal DVD A B Repeat Teletext Size DVD Call Teletext Mode DVD Angle Teletext Time Digital LED LCD Televisi
12. andard If USB equipment in conformity with USB1 1 full speed Interface Standard is used the playing may be unsmooth When connecting removing the USB device Press SOURCE on the remote control unit to select USB option Insert USB equipment into corresponding USB interface 2s after starting the system After entering the system menu press 4 gt on the remote control unit to select the require USB files press OK button to confirm the selection and enter the file list relative to the selection Press on the remote control unit to select the required file press OK button to enter the selected file To exit the streaming media playing system and watch aTV program you must press BACK button to return to the streaming media main menu at first to protect equipment and then press SOURCE to select TV to return to the TV mode SP Note Q Under source of USB when press button MENU screen goes black except when images or movies are being played Q While playing the USB press BACK button repeatly the screen picture will return to USB main interface and only at this time you can switch corresponding signal sources by pressing SOURCE again Digital LED LCD Television Instruction Manual EN 24 Using the features U Please do not unplug the USB device when the connected USB storage device is working When such device is suddenly separated or unplugged
13. cccccccccccsccccccees 30 ERE TA sts ccses accusation cue re ace eat a cuuua tice Hunk 12 AUTO SEARCH eisian ENNO 12 DIGITAL MANUAL SEARCH cssscssssssssssssecssesssscseeneees 12 Analog Manual Search s sesessssesseessseessseesseesseeosseesseesssessss 12 Channel Edi Geesen a N 13 RENAME casat ccs rn aa T 13 MOVE sgeanan e S 13 Setting favourite channel sese ssssesssseessssesssseesssseessseesss 13 EI S AIE E E E PAE A E ale 13 GUIDE Electronic Program Guide cesses 13 COMMON INTERFACE ccccscccccescccsccscsccsecees 14 Software Update function sse sssesssessssessseesseessseesseesssessss 14 EN 1 Digital LED LCD Television Instruction Manual Safety Warnings WELCOME Thanks for buying this FHD Digital LED LCD TV This manual will help you set up and begin using your TV First check the contents of your box with the parts checklist below e FHD Digital LED LCD TV e Remote control AAA battery x 2 e Instruction Manual e Quick Start Guide e Warranty Card e TV Stand e 5 x Screws for TV stand Component adapter Component audio adapter SCART adapter e Cover Used when wall mounting the TV Now you can get started IMPORTANT INFORMATION READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE WARNING RISK z Sea eae WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER TO QUALIFIED SERVICE PERSONNEL To a
14. cssscseessseeneess 9 CONNECT YOUR PC TO THE TV ccssesssssssessesessssscseesseees 9 SE PEAS TES NOMS reece eaan oe CONNECT A DVD PLAYER TO YOUR TV ccccccccccccccccceces 9 i Eas cc ieee te ey OR en IO Oe N 23 CONNECT A DVD PLAYER OR VCR TO YOUR TV 6 USB MODE wsssicssescsscssscaccusveciccssacsccencsciessseveedeoavens 24 SCAR TINE UT Terei O 9 TO USE THE USB DEVICE iiron 24 FID MATIN OV accccicscies ctesstscquce NEE E A 9 When connecting removing the USB device 24 MOUNT YOUR TV ONTO THE WALL esesessseeseeeeees 9 Operating the USB device esesssseeseeseesecnecteseeseenees 25 PREPARATION OF YOUR REMOTE CONTROL Pla VIG a PICU e annn taste aANT 25 BATTERY INSTALLATION ooccccccccccccccccccccccecccccccccccccccececcecccees 10 Playing Music sudbdesedbsevavessesssasddnecneceusnsnsevadadunecedenessanesadnnowatees 25 BATTERY CAUTION cccccccccccccccccccceccccccecececcececcccccccccececsecesecs 10 Playing a MOV Geshe tna tha cetera scene E 26 TEXT nio A T eri rere ery Tere tere 26 Getting Started 10 USING EXTERNAL USBDEVICE FOR RECORDING26 TIME STAMP Torea 27 ae een ERA by RECORDING na S 28 LOCATON srne T 10 CONNEC HON Taa EE A E 12 Reference Sections 29 SWITCHING YOUR TV ON serivisi 12 gt roe a i lt C TONING YOUR TV cisceteigecssiteriusiinlcaisieecaniances 12 TROUBLESHOOTING ssssssssssssssssrsesssesssessseees 29 SWITCHING TO AN EXTERNAL SOURCE OTHER THAN SPECIFICATION ccccccccccccccccscc
15. d skip the channel in the analogue mode g Press MENU button Digital LED LCD Television Instruction Manual EN 12 Getting Started Country Auto Search Digital Manual Search Analog Manual Search Channel Edit Guide Cl Information Software Upgrade Start Upgrade ml Picture s Sound 3 Tuning Function Time A Lock F Press 4 button to select TUNING menu press v button to enter E Press a button to select CHANNEL EDIT item Press gt button to enter the sub menu You can press red green yellow or blue button to enter the menu you need RENAME E Press button to select the channel and press green button to rename Channel Edit 8C 23 9C 28 10C 30 110 32 12C 47 13C 49 14C 58 15C 61 16C 65 E EE E E E E EEE F Press4 button to select the number position of channel name Press a w button to select number E You can press the EXIT button to cancel the changes at anytime RA Note L The RENAME function is only available in ATV program MOVE E Press button to select the channel and press yellow button to select the position EN 13 Digital LED LCD Television Instruction Manual F Press a button to select the number position you want to remove to press yellow button to confirm B You can press the EXIT button to cancel the changes at anytime Setting favourite channel E Press a button to select the channel press red button to set your favourit
16. display the Source is locked Change Password Child Lock Tuning Lock Sourcel Set Channel No Source Lock Max Volume Initial Volume Parental Lock AN ARAA A AL A A mJ Picture m Sound Tuning eFunction Time B Lock lt Max Volume Press button to select Max Volume Press 4 gt button for adjustment between 0 100 If a certain Value is set when volume is being adjusted the sound value can not exceed maximum volume value If current volume is over Max Volume when lock set menu is set current volume will become set maximum volume if current volume is below maximum volume customer set volume will stay unchanged Initial Volume The TV will remember it after your setting that will be the volume when turning back on the TV the next time Parental Lock Press a w button to select parental lock Press 4 gt button to select OFF or 4 18 to limit the age of children who will watch TV Clear Lock Press a w button to select Unlock mode Press 4 gt button to unlock all set modes setting all lock options to off and the maximum volume returns to 100 SHORTCUT MENU DISPLAY Subtitle Function E Press SUBTITLE button on the remote control will display Subtitle languages menu press button to enter Subtitle Languages off English F Press a button to select the item and press OK button to enter You can press the EXIT button to cancel the changes at anytime RA Not
17. e Sound Tuning y amp eFunction Time ff Lock Audio Languages Press a w button to select Primary Secondary item and then press 4 gt button to select the languages you needed Press w button to select Close item press OK button to close it Menu P Note L The Audio Language function is only available in DTV mode Reset To recover to the default menu setting FUNCTION SETTINGS g Press MENU button Language English Subtitle Language English Display Mode 16 9 Blue Screen Off Recorder SCART Input AV OSD Time Out Off OSD Transparency Off Reset ok ml Picture s Sound fs Tuning JK Function Time a Lock F Press button to select Sound menu press v button to enter Language lt English Subtitle Language English Display Mod Blue Screen Primary Recorder SCART Inp OSD Time Q OSD Transp lt English gt Secondary lt English gt Im Picture s Sound 3 Tuning Kk Function Time a Lock Press w button to select the item requires adjusting Press 4 gt button to adjust the selection item en When you are satisfied with your choice press the EXIT button to return to normal viewing or press MENU button to return to the previous menu Language To select the menu language Subtitle Language To select the Subtitle language Display Mode To set the picture proportion press 4 gt button to select 4 3 Zoom1 Zoom2 Wide 16 9 Auto You can quickly
18. e _I Press SUBTITLE button on the remote it will display subtitle languages menu only in the DTV mode CH LIST Function g Press CH LIST button on the remote control will display Channel List menu Channel List ov 1 BBCI gt Vane 1 Om O DIV 5 five DIV 7 BBC THREE DIV 16 QVC DTV 17 UK Gold DIV 23 bid uptv pv 25 TCM pbTV 26 UK Style DIV 27 Discovery F Press a button to select the channel and press OK button to enter You can press the EXIT button to cancel the changes at anytime GUIDE Function Press GUIDE button on the remote control will display Program Guide menu press a 4 gt button to select the program You can press the EXIT button to cancel the changes at anytime GUIDE DTV 1 BBC ONE Wales 10 Mar 2004 15 04 14 00 16 00 Gold Workshop With Jan Springer 10 Mar a 16 00 1 BBC ONE Wa No Information 2 BBC 2W Funstamps 7 BBC THREE No Information 23 bid up tv No Information 25 TCM No Information 26 UK Style No Information a NIRO Record Schedule OK RA Note EN 21 Digital LED LCD Television Instruction Manual I Available only in the DTV mode FAV Function Press FAV button on the remote control will display Favourite List menu Press w button to select program and press OK button to enter You can press the EXIT button to cancel the changes at anytime FAVORITE LIST DIV 1 BBC1 ov2 BBC TWO a DIV 5 five INFO Press INFO button
19. e channel You can press the red button to cancel the changes at anytime 2 3 Press FAV button on the remote control and Favourite List will be displayed g Pressa w button to select the channel and press OK button to enter SKIP E Pressa button to select the channel and press blue button to skip the current channel A Youcan press the blue button to cancel the changes at anytime GUIDE Electronic Program Guide Using this function you can access the DTV program information g Press MENU button Country Auto Search Digital Manual Search Analog Manual Search Channel Edit Guide CI Information Software Upgrade Start Upgrade mi Picture s Sound EJ Tuning KFunction Time amp Lock 2 Press 4 gt button to select TUNING menu Press button to enter E Pressa button to select the guide item Press OK button to enter the submenu the electronic program guide is displayed You can quickly call up Guide menu by GUIDE button on the remote control GUIDE DTV 1 BBC ONE Wales 10 Mar 2004 15 04 14 00 16 00 Gold Workshop With Jan Springer 10 Mar BE 16 00 1 BBC ONE Wa No Information 2 BBC 2W Funstamps 7 BBC THREE No Information 23 bid up tv No Information 25 TCM No Information 26 UK Style No Information ON NFO REMIND J Ok Bg Note L Only DTV mode COMMON INTERFACE The common interface Cl slot is designed to accept the Conditional Access CA Module and Smart card in
20. em still exists contact authorized after sales service for technical assistance RA Note LI If the fault can not be repaired using the above guide consult with your local authorized service centre L The TV set must only be repaired by a qualified registered service person Never attempt to remove the back cover as the TV set has dangerous voltages in side that may cause a fatality or fire Using the features SPECIFICATION Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations Picture sound system PAL SECAM B G D K L L Audio output 8W 8W External input port COMPONENT input PC input PC DVI Audio input SCART Antenna input HDMI input USB Temperature Working 5 C 35 C Storage 15 C 45 C Humidity Working 20 80 Storage 5 90 Accessories Remote control AAA battery x2 Instruction Manual Warranty Quick Start Guide TV Stand 5XScrews for TV stand Component adapter Component audio adapter SCART adapter Cover bottom K 2 E _J The part specifications of this TV set provided here are for reference only L Differences may occur as product technology is updated _J Design and specifications are subject to change without notice Digital LED LCD Television Instruction Manual EN 30
21. for record is 1GB Providedevice formatting function is up to 2TB The maxMulti Partition is 16 partitions and one is active ata time I Bit rate e Device bit rate gt 4 5MB s REC is is good at HD streaming speed e Device bit rate gt 1 5MB s REC is good at SDstreaming speed e Device bit rate lt 600KB s REC is bad for REC e Keep all cables as short as possible the keep streaming speed as high as possible L The system cannot work normally if the USBdevice has the problems listed below e The device has bug e The device has error block e The device size less than 1GB or exceeds the Time Shift maximum e The device is not FAT32 format Jk IMPORTANT e The USB device should be formatted as FAT32 format This can be done by your PC refer to PC software instructions for formatting a device to FAT32 format before inserting the USB device into the USB Port TIME SHIFT Time Shift 14 51 00000000 OOOO il 00 00 12 00 10700 gt Time Shift 14 51 CIIIIII I OOO0OOO0_ 00 00 12 00 10 00 Time Shift function is only available in DTV mode L Press PLAY PAUSE to pause the program and press PLAY PAUSE again the time shift program will be played If you want to stop time shift function press the STOP button L You can stop the time shift program being played by pressing the STOP button RECORDING E Press D MENU button to record the program being played and press D MENU or EX
22. from the TV shop s web you can update the operating software using the Download menu The data for various units are transferred consecutively on a special receiving channel e You need to search the channel with updating code stream Digital LED LCD Television Instruction Manual EN 14 Getting Started Country Auto Search Digital Manual Search Analog Manual Search Channel Edit Guide Cl Information Software Upgrade Start Upgrade Ml Picture s Sound Tuning yeFunction Time fM Lock RA Note LI You can get information from the TV shop or internet Operation g Press MENU button Country Auto Search Digital Manual Search Analog Manual Search Channel Edit Press 4 gt button to select TUNING menu press v button to enter Press a w button to select Software Upgrade item Press 4 gt button to set it as On The default is Off The Start Upgrade item can be selected The default is grey and cannot be selected Press EXIT to cancel download EN 15 Digital LED LCD Television Instruction Manual J Press button to select the Start Upgrade option and use OK button to enter Then the TV will restart and search the upgrade information RA Note LI If the upgrade information is received the TV will begin to upgrade Or else the TV will go back to the DTV source El Load the receiver identification This process may also take several minutes You can press EXIT button to cancel the
23. g g Press MENU button F Press4 button to select Sound menu press v button to enter Digital LED LCD Television Instruction Manual EN 16 Getting Started Renu baana lt E i AM cnt J TEN u gt Digo Aio Cet pac om gt Pps ri J an E ra a i a a E Press a button to select the item requires adjusting O Press button to adjust the selection item AY when you are Satisfied with your choice press the EXIT button to return to normal viewing or press MENU button to return to the previous menu Balance This will adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening position Mode This will select the sound mode Press 4 gt button to select Standard Music Theater User according to the program You can quickly select the desired mode by S MODE button on the remote control AVL Automatic volume control This will reduces the differences in volume level among broadcasters SRS TS XT This will control the Woofer output Press a v button to select SRS TS XT Press 4 gt button to set SRS TS XT as OFF ON Digital Audio Output This will control the Digital Audio Output Press button to select Digital Audio Output Press button to set Digital Audio Output as OFF PCM RAW Equalizer This sound setting can be adjusted to suit your personal preference EN 17 Digital LED LCD Television Instruction Manual mi Pictur
24. he DvD player and insert a DVD 2 Press the source buttom on the remote control to select the source of COMPONENT in your TV EJ Refer to the DVD player user guide for operating instructions e N FP Do ee DVD S J SCART INPUT El Connect the scart lead from the external device DVD player Set top box or games console with the supplied SCART adapter to the TV scart socket Press the SOURCE button to select SCART mode Press the PLAY button on the external device HDMI INPUT g Connect the cable from the HDMI device to the TV HDMI socket 2 Press the SOURCE button to select HDMI mode E Refer to the HDMI device user guide for how to operate MOUNT YOUR TV ONTO THE WALL You can mount your TV onto the wall by using a wall bracket not supplied Use M4 M6 machine screws 4 pcs to screw the TV onto the bracket not supplied About your LED LCD TV Getting Started PREPARATION OF YOUR REMOTE CONTROL BATTERY INSTALLATION E Piace the remote control face down then open the cover of the battery compartment Install two AAA batteries The and symbol of the battery must match with the marks on the remote Abc BATTERY CAUTION Confirm there is no object between the remote control and the remote sensor of the TV set Sunshine or other strong light will interfere with the signal sent by the remote control In this situation
25. he USB has been used to record you can check the device Time Shift size and speed by selecting Check File System Press a w buttons to select Check File System press the OK button and after a short delay the on screen display will show Time Shift size the streaming speed and the picture standard either HD SD or REC For first time use of the USB device J Press button to select Format and press gt to enter Press 4 gt button to select the size you wantto format Press OK button to format the USB Disk File System Size File System Size All SD 27Min HD 7Min P Note L The system will format the whole device and if your device size is bigger than 1 GB you can set the size which is used for time shift El Format may take several minutes and the time isdepending on the memory size Press 4 buttonto select the Time Shift Disk Size The max device sizefor Time Shift is 8GB Then press OK button to save Format Do not unplug USB device Formating Time Shift Size ime saii oze All HD4Min CANCEL SD 14Min EN 27 Digital LED LCD Television Instruction Manual P Note LI If you select all the size format for time shift you cannot do any recording g Waiting for the system to finish checking You can seethe speed data displayed on screen after the checking is completed P Note L You only have to format when you use the device for recording for the first time L The minimum device size
26. he picture will appear GQ oninitial switch on only Select your chosen language when prompted from the list that will appear on screen Use the gt button to scroll to the language you want and press to confirm Note The Power buttons toggle the TV between Standby and ON To remove power from the TV switch off and unplug the TV from the mains supply TUNING YOURTV SWITCHING TO AN EXTERNAL SOURCE OTHER THAN THETV If you have attached a DVD player or similar external device to the TV you will need to tell the TV to display the content from it Simply press SOURCE which will bring up the source menu in the left corner of the screen use the a and button to highlight the required source and press OK select For details of how to plug in other equipment see GET TO KNOW YOUR TV on page 6 Input Source DIV TV SCART Component PE HDMI HDMI2 HDMI3 USB AUTO SEARCH g Press MENU button EN 11 Digital LED LCD Television Instruction Manual Country Auto Search Digital Manual Search Analog Manual Search Channel Edit Guide CI Information Software Upgrade Start Upgrade Picture L Esd Tuning Kk Function Time a Lock F Press 4 button to select Tuning menu press v button to enter E Press a button to select Country item Press 4 gt button to select you needed Press a button to select Auto Search item press OK button to enter Press 4 gt button to select the OK optio
27. ion Manual EN 6 About your LED LCD TV GET TO KNOW YOUR TV Front control panel SOURCE MENU To use the touch sensor on the side of the TV Touch to toggle between all the available Touch to change channels SOURCE input sources Use with the CH and A CHa w Note Touch to move the on screen selection up VOL buttons to make selections or down when Source is selected MENU Touch to see an on screen menu ofyourlVs Touchtoturn the TV On and again to Standby _ features Touch to increase or decrease the volume 3 VOL Note When Source is selected touch VOL to confirm selection Rear Terminals Control COMMON INTERFACE us DAA E AUDIO PC PC DVI AUDIO COMPONENT IN N HDMI 3 IN HDMI 2 IN QA mm O gt gt SCART Input Common Interface Component Input Earphone Output 3 Component Audio Input ANTENNA Input 4 PC Output a PC DVI AUDIO Input d USB Input Output 6 HDMI3 IN Input 3 HDMI1IN Input D HDMI2 IN Input EN 7 Digital LED LCD Television Instruction Manual About your LED LCD TV GET TO KNOW YOUR REMOTE CONTROL When using the remote control aim it towards the remote sensor on the TV D MENU OPEN CLOSE INFO P MODE S MODE SLEEP AUDIO SUBTITLE CH LIST SCREEN SOURCE Q VIEW MUTE 70000 GUIDE EXIT Cv BACK O REPEAT INDEX PLAY PAUSE Ca Gx Gr
28. isfied with your choice press the EXIT button to return to normal viewing or press MENU button to return to the previous menu Contrast This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged Brightness This will adjust the light output of the complete picture which will mainly affect the darker areas of the picture Getting Started Colour This will adjust the saturation level of the colours to suit your personal preference Sharpness This will adjust the sharpness of fine details in the picture Tint Allows you to select the colour mix Tint of the picture P Note L The Tint function is only available in NTSC mode Mode This will select the picture mode Select Standard Mild User Vivid according to the program You can quickly select the desired mode by P MODE button on the remote control Colour temperature This will increase or decrease Warm red and Cool blue colours to suit personal preferences Select Cool to give the white colour a blue tint Normal to give the white colour a neutral tint Warm to give the white colour a red tint Noise Reduction Automatically filters out and reduces the image noise and improves picture quality when receiving weak video signals Select Off Low Standard High according to the image noise Reset To recover to the default value ADJUSTING SOUND SETTINGS Changing the Sound Settin
29. n and press OK button to start searching Press the MENU button you can choose to skip the TV DTV Search or not Country Auto Search Digital Manua Analog Ma Channel Ed Guide Cl Informat Software U Start Upgrae OK Do you want to start Auto Search ml Picture s Sound 3 Tuning Kk Function Time B Lock E Press EXIT button to stop auto search during searching RA Note L It may take a few moments to complete the Auto Search DIGITAL MANUAL SEARCH g Press MENU button Country Auto Search Digital Manual Search Analog Manual Search Channel Edit Guide CI Information Software Upgrade Start Upgrade mal Picture s Sound aa Tuning Jk Function Time a Lock E Press 4 button to select Tuning menu press v button to enter EJ Press a button to select Digital Manual Search item press gt button to enter Digital Manual Search Please select channel then Please OK to searh DTV 13 Radio 6 Bad Normal Good Gal Ea Coo O Press 4 button to select the Channel Press OK button to start searching HY once a channel is located you can press OK button to save it Press EXIT button to exit Analog Manual Search Follow the below steps when you need to have a manual search g Press MENU button Country Auto Search Digital Manual Search Analog Manual Search Channel Edit Guide CI Information Software Upgrade Start Upgrade Picture s Sound Tuning KFu
30. nction Time Lock F Press 4 button to select Tuning menu press v button to enter E Press a button to select Analog Manual Search item press gt button to enter Getting Started Analog Manual Search ColourSystem lt PAL Sound System lt Current CH lt 9 Storage To lt 9 Search z Fine Tune lt Frequency 487 25Mhz O Press button to select Search item press gt button is used to select the higher frequency channel Press 4 button is used to select the lower frequency channel EJ And then select Storage To press 4 button to select the position number you want the channel on Once a channel is located you can press red button to save it Press EXIT button to exit Sound System Press button to select Sound System then press 4 gt button to select the correct sound system Current CH Press 4 gt button to select the channel number to edit Storage To Press 4 gt button to select the program number you want to storage to Fine tune If the picture and or sound are poor try using the FINE TUNE feature Do not use this feature unless reception is poor g Repeat above steps I H then press button to select the Fine Tune item E Press 4 button repeatedly to carry out fine tune till the best picture and sound are obtained then loosen the button Channel Edit Using this function you can rename move set favorite channel an
31. nel number you are using is 18 as shown in the figure 18 18 If you want to return to the last watched program channel 8 you can simply press the Q View button If you want to return to channel 18 press the button again Use this function you can easily change between the channel you are using and the channel you used last Time Digital LED LCD Television Instruction Manual EN 22 Using the features USING THE FEATURES Teletext functions Teletext is an information system broadcast by certain channels which can be read like a newspaper It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast cable networks satellite channels etc FP Note L The teletext buttons could be working even if there is no teletext signal but there is no teletext display Teletext Teletext functions To select teletext press the button on the handset To switch off teletext press the button again Note all menu functions are not available in teletext mode Only a few direct button control functions are available in teletext mode they are e Volume adjustment e Mute function P SETUP Page up down Use the P P buttons to browse next or previous page OG Page number entering To select a Teletext page enter the page number using the numeric key pad on the remote control or use the P
32. o select Time menu press v button to enter Press a w button to select Time Zone item Press 4 gt button to select the correct time zone A Press MENU button to save and exit LOCK MENU SETTING Using this function can control the tuner program source volume and so on Pressing MENU on the remote control press 4 gt button to select Lock menu press v button to enter the sub menu and you will be required to enter the password The initial password of the television is 0000 If you forget your password you can always input 9443 to regain control Change Password Child Lock Tuning Lock Sourcel Set Channel No Source Lock Max Volume Initial Volume Parental Lock AN ARIANA A AL A A Ml Picture Sound Esg Tuning K Function Time B Lock CHANGE PASSWORD E Press button to select Change Password item Press gt button to enter the submenu Getting Started Change Password Child Lock Tuning Lock Sourcel Set Channel No Source Lock Max Volume e Initial Volume Parental Lock Please Enter Password mm Picture s Sound f Tuning Jk Function Time Gi Lock A when you have inputted the four digits you will be prompted to enter it again Your new password will then be automatically saved CHILD LOCK Press a w button to select Child Lock Press 4 gt button to set On or Off mode If lock on mode is set Child Lock is in activated automatically In such case if the button
33. on Instruction Manual EN 28 Reference Sections TROUBLESHOOTING below No picture no sound Blank screen No sound Poor sound No picture in some channel No color for some channel program black and white Spots with some or all pictures E To assist in location of possible faults use the help guide Verify if the television is properly plugged in Verify if the television has a proper supplied power source Verify if electricity is available Verify if correct signals are input Operate the remote to change signal input to correct input Restart the television if power supply is interrupted Press MUTE button and verify if Mute mode is set Switch to other channel and verify if the same problem happens Press VOL button to see if the problem can be solved Verify if sound system is correct Refer to user s manual for adjustment Verify if correct channel is selected Adjust the antenna Verify if the same problem exists in other channels Check out of picture and sound systems Refer to relative instructions in the Manual for color adjustment Verify if the antenna is correctly connected Verify if the antenna is in good condition Make fine adjustment of channel EN 29 Digital LED LCD Television Instruction Manual Disconnect the television from power supply and 10 seconds later connect the television Television out to the power supply If the of control i probl
34. on Instruction Manual EN 8 About your LED LCD TV CONNECTING YOUR TV ANTENNA CONNECTION Connect your aerial to the back of the TV into the ANTENNA IN socket IMPROVE YOUR SIGNAL To improve picture quality in a poor signal area use a signal amplifier not supplied CONNECT YOUR PC TO THE TV You can use your TV as a monitor for your personal computer by connecting it with a VGA cable not supplied E Read your computer user guide and check it has a VGA connector BH Turn the power off on your TV and PC E connect aD type 15 pin VGA interface cable to the VGA video interface connector on the PC Connect the other end of the cable to the PC interface connector on the TV Tighten the screws on the VGA connectors and connect the audio cable not supplied to the audio input socket on the back of the TV Turn on the power of the TV firstly and then the PC A Press the button on the TV or TV remote control to set the video input mode to VGA once the image shows if there is noise present change the VGA mode to another resolution change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear CONNECT A DVD PLAYER TO YOUR TV Connect the DVD video outputs Y Pb Pr with the supplied component adapter and component audio EN 9 Digital LED LCD Television Instruction Manual adapter to the COMPONENT Y Pb Pr IN socket on your TV E Turn ont
35. on on the remote control as the coloured link at the bottom of the teletext page to go directly to that page REV FWD PREV NEXT Subcode Pressing the button by entering its 4 digit number to enter a secondary page oS SEARCH USB MODE P Note L The diagrams in the following section are schematic and only for your reference Please see the actual product if necessary L The OSD of the USB function may be somewhat different from your product because it is just example to help the instruction TO USE THE USB DEVICE g Supported file formats e Photo jpg e Music mp3 files e Movie avi files e TEXT txt Only on some models RA Note L Due to the particularity of file recording some files may be unable to be read E To achieve smooth playing ensure the following Using the features Supported equipment Support the equipment that supports Mass Storage Protocol and whose file system is FAT32 such as some USB disks mobile harddisks and MP3 player If USB equipment could not be identified due to unsupported file system please format the equipment to the above mentioned file system e The file code rate should be lower than 300KB S e Due to the limitation of USB signal transmission distance it is recommended not to use USB patch cord in case of using the cord make sure that its length is not over 1m e Use high speed USB equipment in conformity with USB2 0 full speed Interface St
36. on the remote control will display the current channel information You can press the EXIT button to cancel the changes at anytime News and Factual Start your day with all latest news sport business and weather from the BBC s Breakfast team Includes regional news at 25 and 55minutes past each hour AUDIO I II Press AUDIO button on the remote control will display Audio Languages menu Press w button to select the desired settings and press OK button to enter You can press the EXIT button to cancel the changes at anytime ANI items i Valeler le l a4 English CIEE m6 English RA Note l1 Press AUDIO button on the remote it will display Audio Languages menu only in the DTV mode Eliminate Sound When you need to pay attention to surrounding sounds or there is a telephone call or there are some guests visiting you the sound elimination mute function is very convenient Quick program view Getting Started Press the MUTE button on the remote control and Mute type face will display on the lower part of the screen At this Time the sound of the TV set is turned off If you want to recover the sound press the MUTE button again or directly press V button This function enables quick swap to the last watched program Press Q view button and the TV will be back to the TV source except in the USB and DVD source Suppose the channel number you used just now is 8 and the chan
37. or P buttons or the coloured Fast text buttons EN 23 Digital LED LCD Television Instruction Manual Mix mode To view the TV picture while in Text mode press the button this will superimpose the Teletext data on top of the TV picture Press this button again to return to Full text INDEX Press the INDEX button to go to the index page of teletext INDEX Language change Pressing the button will change the Teletext characters between Eastern and Western P D CALL Hold Pressing the button will stop the teletext page automatically updating This feature is very useful where there are several teletext pages or data on the same page number Size Pressing the button changes between full screen top half bottom half full screen This feature is very useful as it magnifies the image making the characters easier to read Reveal Pressing the LJ button will reveal hidden text This feature is used to reveal information such as answers to Teletext on line interactive puzzles PROGRAM 5 lt Hide Pressing the amp button will hide text REPEAT Time While in normal TV mode only pressing the button will display the teletext time in the top right hand corner for a few seconds 2 Sane Fast text coloured buttons Fast text automatically displays the four most commonly used pages that the broadcaster thinks that you may want to choose next Press the same coloured butt
38. order to view the pay TV programmes and additional services Contact your Common Interface service provider to get more information about the modules and subscription Please note that CA modules and smart cards are neither supplied nor optional accessories from us Country Auto Search Digital Manual Search Analog Manual Search Channel Edit Guide Cl Information Software Upgrade Start Upgrade Im Picture a Sound Tuning yeFunction Time MM Lock Warning e Switch off your TV before any module is inserted in the Common Interface slot Cl Module Insert E insert the CAM correctly then Smart Card to the Cl slot that is located at the side of the TV Getting Started Main Menu Module information Smart card information Language Software Download Press OK to select or Exit toquit EXIT OK P Turn on the TV and it will display the below message if the CA module is detected Wait for few moments until the card is activated E Press the MENU button to display the Main Menu and use the and button to highlight the Common Interface line and press the OK button 4 Detailed information on the Cl card in use is displayed A Press OK button to access the card menu Refer to the module instruction manual for setting details J When module is removed the following message will appear on the screen CI module removed Software Update function e When you get the updating news
39. product at all times Digital LED LCD Television Instruction Manual EN 2 Safety Warnings If fixing TV to the wall please make sure unit is securely fixed Do not locate the product close to water or oil which may cause fire hazards Do not use damaged or worn electrical plugs and keep electric cord away from heat sources to avoid electric shocks or fire hazards The product must be placed on a solid and stable surface to avoid collapse eae Keep the product away from a transformer or heat source to avoid fire hazards EN 3 Digital LED LCD Television Instruction Manual To avoid fire hazards do not use this product under direct sunlight or close to any heat sources Unplug the power supply and antenna of the product when there is a rainstorm especially Thunderstorm 1 Do not connect excessive sockets in parallel or share the same socket by multiple plugs to avoid fire hazards Unauthorized disassembly of the television is prohibited to avoid electric shocks or fire hazards Contact authorized after sales service if technical service is needed Disconnect the product from power supply and contact authorized after sales service if abnormal sound is heard in the product Do not use or store inflammable materials near the product to avoid explosion or fire hazards The antenna of the product should be kept away from electric cable to avoid electric shocks Always make sure the TV is
40. s on the television is pressed the screen will display Child Lock which will disappear automatically after the latest pressing 5 seconds The Child Lock mode can be resumed by entering Lock Set menu set Child Lock On or Off Tuning Lock Press w to select Tuner Lock and 4 gt to set On Off To set On some operation such as search will be not available When enter the Tuning menu Tuner Lock will be on the screen If you want to operate Tuning menu you need to enter the Lock menu to set Tuner Lock Off or operate unlock Channel NO Channel NO is opted for setting up preset channel Press w button to select preset Channel Press 4 gt button to select channel number Source Selection Source Selection is used for selecting the source your DVD player satellite PC etc connected to this TV of the program you want to watch On the remote press SOURCE button then either buttons to select DTV Digital TV TV Analogue SCART Component PC HDMI1 HDMI2 HDMI3 or USB as required Then press the OK button amp Note DVD is not available on some models Source Lock Source Lock will control the On or Off of hinder external input modes Press 4 gt button to set as on or off Digital LED LCD Television Instruction Manual EN 20 Getting Started When the source lock is set as on TV source will display at this time when press SOURCE button the TV can switch to corresponding source and will
41. securely plugged in aS a poor electrical connection may cause s I L a fire Unplug the TV if you are going to clean the product use soft fabric never chemicals make sure that no water drops are in the product iy Disconnect the television from power supply and antenna when there Is a rainstorm or thunderstorm to avoid electric shocks or fire hazards Safety Warnings Do not place the product in a humid area to avoid fire hazards Never touch the plug when your hand is wet as this might cause electric shocks v amp ais When antenna is used measures should be taken to prevent water from flowing down along the cable into the television The plug and electric cable must be kept clean to avoid electric shocks or fire hazards Disconnect the television from power supply to avoid electric shocks or fire hazards in a long vocation Digital LED LCD Television Instruction Manual EN 4 About your LED LCD TV About your LED LCD TV INSTALLING THE STAND 1 Carefully place the TV screen face down ona table We suggestthat you place the wrapping material fromthe TV package on thetable top toprotect the screen from damage 2 Position the stand with the bottomof the TV as shown below
42. select the desired mode by SCREEN button on the remote control 4 3 mode Choose 4 3 when you want to view a picture with an original 4 3 aspect ratio with gray bars appearing at both the left and right sides 16 9 mode Choose 16 9 when you want to adjust the picture horizontally in a linear proportion to fill the entire screen Zoom Choose Zoom when you want to view the picture without any alteration However the top and bottom portions of the picture will be cropped e Zoom2 Choose Zoom2 when you want the picture to be altered both vertically extended and cropped The picture taking a halfway trade off between alteration and screen coverage Wide Choose Wide when you want to adjust the picture in anon linear proportion that is more enlarged Getting Started at top sides and no alteration at bottom side Blue Screen This will select the character background colour RA Note L The Blue Screen function is only available for ATV mode lt Recorder To record the DTV program Details of Recording are described on the page of 25 27 SCART Input The item does not work OSD Time Out To set how long you want the menus to appear on screen Each press of 4 button repeatedly to select the number of preset minutes the Time will be set in sequence off 10sec 15sec 30sec 45sec 60sec Language English Subtitle Language English Display Mode 16 9 Blue Screen Off Recorder SC
43. void electric hazards it is strongly suggested that the back cover not be opened as there are no accessories inside the casing lf necessary please contact authorized after sales services A lighting flash mark in a triangle A potentially hazardous situation which if not avoided could result in serious injury by high voltage An exclamation mark in a triangle Major part or accessory of which technical specifications must be followed if it is to be replaced WARNING To avoid fire or electric hazards never place your television receiver in an area with heavy moisture Attention should be paid to avoid accidental scratches or impacts onto the screen CAUTION A Please read this manual carefully before using your television and keep this manual in a good place for future reference A To achieve the best performance of your television read this User s Manual carefully and properly store it for future reference A Information of screen displays and figures in the User s Manual may vary due to technical innovations CAUTION A Unauthorized disassembly of this product is prohibited TruSurround XT SRS and the A symbol are trademarks of SRS Labs Inc TruSurround XT technology is incorporated under license from SKS Labs Inc TruSurround XT creates a truly immersive surround sound experience with rich bass and clear dialog from only two speakers l WARNING To prevent the spread of fire keep candles or other open flames away from this
Download Pdf Manuals
Related Search