myFleaTrap FT-02 user manual - Pestys Pest Control Products
Contents
1. QYestham i myFleatrap ECOLOGICAL PET PROTECTOR Model No FLT 02 User manual Patent No 5 231 790 Elea rap ECOLOGICAL PET rap Introduction Thank you for purchasing myFleaTrap a Westham Innovations product Westham Innovations designs and manufactures unique and ecological pest control devices and insect traps myFlealrap isa safe cordless and highly effective device designed to rid your home of fleas swiftly and efficiently MyFleaTrap i is chemical free and environmentally friendly Product Layout Two LEDs Protective Grill Battery compartment On Off Switch Light sensor 6DCV socket Adhesive sheet AXAA batteries not Included ied AC to 6DCV adaptor not included Trapping Principles myFlealrap s based on Kansas State University patent 5 731 90 and on extensive laboratory testing The intensity and color of the lights and their on off lighting pattern attracts the insects and traps them on the disposable adhesive sneet estham INNOVATIONS Set Up Batteries 1 Remove battery compartment cover 2 Insert 4XAA Alkaline dry long lasting batteries 3 Close battery compartment External power supply Connect AC to DCV adaptor and to 6DCV 200mA socket Important Make sure to use an adaptor with the correct voltage and polarity Positioning adhesive sheet 1 Open trap 2 Remove grill 3 Position new adhesive she2. frequently Store the trap properly when not in use to ensure longevity 1 Disconnect myFleaTrap from the external electrical outlet and remove from socket 2 Remove batteries from battery compartment 3 Dispose of adhesive sheet 4 Close myFlealrap and store in cool place until required Designed ana manutactured by Gyestham INNOVATIONS www wsthm com Replacing batteries 1 Open battery compartment cover 2 Remove used batteries Do not harm the environment dispose of batteries properly 3 Insert fresh batteries 4XAA 4 Replace battery compartment cover Troubleshooting LEDs do not light up Ensure operating switch is in T or position If you are operating on external power supply e Check connections between the electrical cable and the outlet and between the electric cable and socket If you are using Internal power supply e Make sure to replace batteries before they wear out Important When switch Is set to AA it will only operate in the dark Safety Precautions e Prevent children from looking directly at LEDs when device Is operating Keep children s fingers away from trap when open Ensure trap does not get wet when operating on external power supply Made in China
3. et on bottom of trap with adhesive side facing up 4 Remove transparent cover of adhesive sheet 5 Replace grill cover 6 Position trap In desired location Positioning the Trap myFleaTrap is designed for use indoors and in semi enclosed covered areas The trap will attract fleas in the same room lt is located The trap operates best in darkened areas The trap will operate etfectively when located adjacent to wall or in the corner facing the room Effective light beam angle is 160 See diagram on bottom of trap Operation MyFleaTrap is ready once you have completed set up procedures The device has two operating modes 1 Continuously Operating Mode Set operating switch to I position 2 Energy Saving Operating Mode operates only in the dark Set operating switch to FA AUTO position 3 To switch device off set operating switch to O position Maintenance Replacing adhesive sheet When the sheet is full of fleas 1 Open the trap 2 Remove the grill 3 Grasp the adhesive sheet by both tabs Lift fold and dispose 4 Position new adhesive sheet on bottom of trap 5 Remove transparent cover of adhesive sheet 6 Replace grill Optimal Handling e Avoid getting the trap wet e Remove batteries when device not in use Do not let excessive dust accumulate on LEDs In dusty areas the adhesive sheet may lose its effectiveness and need to be replaced more
Download Pdf Manuals
Related Search