IAWAR SPS—K INSTALLATION MANUAL
Contents
1. 23 672 24 162. JAWAR SPS K INSTALLATION MANUAL 1 Place damp insulation on the foun dation Remember to consider the 0 level Use a grinder to cut an opening h 12cm b 22cm in the top part of the first block 2 Place the first block and fill it with concrete up to the opening After the concrete has set put the conden sate tray into it front towards the opening p 160 130 200 40 50 60 100 100 100 rednic b mm h mm 4 Remember not to block the air chan 5 Cut a pressure equalizing opening nels when putting grout 7 Put glue on the cleaned moistured edge of the condensate tray Next place the tee and center it exactly T after building the whole chimney 10 Next place the chimney door and the condensate tray cover Installation of the chimney door can be also made size b x h in the bottom of the in spection tee 8 Center the tee using stabilising rings at least 1 ring per 1m 11 Place the needed number of pipes and blocks until the demanded con nection hight is reached Remove the excessive pipe glue using a moist sponge 3 Before placing the second block cut an opening size h 26cm attention the block hight is 24cm the rema ining part should be cut from the next block b 26cm Place the block on the first block using grout 6 Prepare the pipe ge in a ratio 7 1 7 x glue 1 x water 9 Place the locking plug in the tee branch size h 24cm b 20
3. cm in a block for the gas con nection 12 Cut on openin JAWAR SPS K INSTALLATION MANUAL a Gas connection Air connection ha ay at lickin plaster 13 Place the block with the opening 14 Remove the block and the pipe 15 Use pipe glue to paste the connec and a pipe without glue and grout Cut an opening according to the tion branch into the pipe Use grout Next using the connection frame drawn dimensions and glue the con to paste the outer air connection ele mark a place for connection opening nection branch into the pipe ment into the block centering it to in the pipe wards the gas connection branch 16 Place the block using grout Put 17 After the pipe glue has set insert 18 Use grout to place next blocks pipe glue on the bottom part of the Bas membrane into the connection until the demanded chimney hight is pipe and place it on the tee Next place branch In case of 2 connections on reached the stabilising rings one storey the hight difference be tween the connections axes should be at least 30cm Chimney top Cut two opposite openings size 17x20cm for ventilation checks in the last block Place the block using grout Next place the covering plate Remem ber to center the opening towards the pipe End cone is the last element of the chimney Mount it onto the last pipe which should stick out above the covering plate FIn i i wW Jawar sp z o o ul Sonska 89 06 400 Ciechan w tel
Download Pdf Manuals
Related Search