User Guide
Contents
1. Answer e Please make sure you installed the correct installation file that matches the USB key number you have e If your installation file number and your USB number are identical and you still have a problem please consult with Radix Question lost my USB key what do I do Answer e You may order a new key with the same ID as you had before e To get the ID of the key press Ctrl B when it tells you to insert Radix key You will then be displayed with a string of numbers and letters please send it to Radix and Radix will know your key ID e You may also have a one time access ability that will let you remove the installation of Radix and you may continue working until you get a replacement key you will work with no protection To get one time access press Ctrl B when it tells you to insert Radix key You will then be displayed with a string of numbers and letters please send it to Radix and Radix will send you the gate key input the gate key number and press enter NOTE DO NOT RESTART YOU PC BEFORE YOU ENTER THE GATE KEY NUMBER OTHERWISE YOU WILL NEED A NEW NUMBER Question installed Radix USB key but it takes very long time for the system to display the request to insert Radix USB why Answer e Disconnect any other USB devices connected to you PC such as USB fdd drive and so on e Use a different USB port Question After installation can t get into the OS from either User Mode or Manager Mode Why2. Radix PROTECTOR Radix Business Protector User Guide February 2004 License Agreement NO eee ere ee ee a ee What is Radix Business Protector System Requirements and preparation Before Installation System Requirements n n nnnnnennenennennenrsrnnenrnssenerrerereene System Preparation MAN Hardware Installation Software Installation Windows installation Installation switches Management amp Configuration WAAC SIS EE EE EE Modify USETEAMG Luse su Modify User Password Modify Manager Password Configure Partition Properties rrrrnrvnrnnrnrrrrrnnrnnnnnnnnnnnrr Disable 1 COMO UN ANON EEE DISDIAY MOE items Prevent floppy disk boot rrrrrrrnnrrnnnnnnrnovenrrnnnnnrnrrenennnn BON SEE Eee HDD IO protection a ns CMOS prolechion uasmuisausnammmiidssmimsdebesikueviensieden BOOlIMGINOGS EE Clear share disk DF WEIS ic el antennes eine cast este seine ele Working with Radix Protector MLP ervrrnnrnrrrnrrnrnnnnnnnrnnnrr Adding A New Restore Point Restoring to a Specific Restore Point Auto Save amp Restore procedures Monitoring Radix used space area Buffer Copyright 2004 Radix Technologies Ltd Radi
3. User mode 7 Radix space used User mode 7 Radix space used am 12 32 Operation mode User Mode Protected XX Radix area size used Radix Caution Normal Radix space used size should be within 15 to 35 range In case used buffer space is greater than 80 a new restore point will be automatically added yh r If the system is set to auto restore mode restore at every boot the Radix space will be automatically cleared every boot Clearing the Radix space area There are two ways of clearing the Radix space User level and Manager level User level By adding a new restore point the data stored in the Radix space area is saved and protected by the MLP mechanism and the Radix space is cleared Manager Level By activate the HDD Save or Save changes permanently commands the current HDD status is being permanently saved as point 0 The Radix space will be cleared and also all restore points will be removed Copyright 2004 Radix Technologies Ltd 21 Radix Business Protector User Guide Working with Multi Boot Multiple OS Working with Multi boot description Radix Protector MLP multi boot is designed to work with multiple partitions each OS Operating System installed on a different partition managed by the MLP console When Radix Protector MLP is set to use a single boot OS a single OS is displayed representing one OS boot selection option Prepa
4. 3 The date and time is automatically stored along with the Restore Point s name and will be visible when you wish to restore Copyright 2004 Radix Technologies Ltd 17 Copyright 2004 Radix Technologies Ltd 18 Radix Business Protector User Guide A new point is now added Windows will continue the booting process Restoring to a Specific Restore Point v r Caution A strict discipline of Restore Point management is required in order to prevent restoration to a wrong point and lose data Note Verify that you keep a proper back up of your data files before restoring the system to a previous point In order to protect your data you may save your data files in an unprotected partition to separate your data file from system restoration In case the need for system restoration arises users can restore the system to any Point added in the past including to Point 0 set by the manager 1 Click Restore to a selected Point button Radix Protector MLP Current Boot selection is WinXP Restore keep changes and run uindous Add a new Restore Point Mise hy solano Pine Save changes permanently Select a boot partition OS Management and conf igurat ion Date 01 13 2004 11 10 10 Name Point Yes No If you only got Point 0 and have not yet added multiple Restore Points the system will automatically be restored to Point 0 without displaying
5. Answer e Change HDD I O protection to no protection under configuration menu e Reinstall Radix after you ran the MBR clearing process See the related FAQ scandisk and defrag e Run 3 party fix disk tool to fix partition errors and install Radix again Question After installation I get a black screen Why Answer e Reinstall Radix after you ran the MBR clearing process and scandisk and defrag e _ Run 3 party fix disk tool to fix partition errors and install Radix again e Make sure the system does not have a raid controller e There might be a problem with the VGA card support under DOS change the VGA card or move the disk to a different HDD to complete the installation after that you may freely use the installed Copyright O 2004 Radix Technologies Ltd 26 Radix Business Protector User Guide Radix MLP on the system Question How do I clear the MBR Answer e For Windows 9x Boot with a bootable floppy disk Run fdisk mbr fdisk file can be found under Windows Command directory e For Windows NT 2K XP Boot the system with the Windows installation CD Choose the Repair option when available When in the DOS prompt type the following commands fix boot then enter and confirm the execution of the command fixmbr then enter and confirm the execution of the command e Restart the system Question Does Radix Protector MLP support SCSI interface Answer e Yes but only for Windows NT 2K an
6. its suppliers distributors or resellers be liable for any indirect special incidental or consequential damage resulting from the use of or inability to use the product including without limitation damages for loss of good will work stoppage computer failure or malfunction or any and all other commercial damages or losses of any kind even if advised of the possibility thereof and regardless of the legal or equitable theory contract tort or otherwise upon which the claim is based on any case Radix s entire liability under any provision of this License Agreement shall not exceed in the aggregate the sum of the fees Licensee paid for this License if any and fees for support of the Product received by Radix under a separate support agreement if any with the exception of death or personal injury caused by the negligence of Radix Radix shall not be responsible for any liability arising out of content provided by Licensee to a third party that is accessed through the Product and or any material linked through such content 7 Governing Law Unless otherwise specifically provided in previous agreement between same parties this agreement shall be governed by the laws of the State of Israel and the exclusive jurisdiction shall be Tel Aviv Notice Radix reserves the right to change the contents of this manual at any time without notice Unless additional remarks are made any name of a company person and information used in this manual are v
7. should be no more than three primary partitions All the rest of the partitions should be extended Copyright 2004 Radix Technologies Ltd 27 Radix Business Protector User Guide e The partition type is not standard MS partition make sure you create partition with standard MS partitioning tools Question Under Windows Radix installation a message There is a NON DOS partition in the last partition in your HDD Installing Radix Protector MLP will damage data inside the partition continue Why Answer e Radix Protector will consider a Non DOS partition as free space this is a warning message e You may choose to stop the installation and make sure you have no important data that can be damaged Question Can I run Scandisk and Defrag under Protection mode Answer e No please see Running Scandisk and defrag section of this guide Question When I prevent floppy boot system crashes why Answer e Old AMI BIOS versions do not support this function Question After Radix installation there is no protection in user mode why Answer e On Windows 98 please make sure you do not have 3 party bus master drivers installed e Make sure you did not have an anti virus software running during installation Question After Radix Protector MLP is working for a while when trying to add a new restore point the following message appears Not enough disk space cannot save why Answer e Free up some disk space from
8. the Restore Point chart 2 Click a Point numbered and the point s information will be displayed on Point information includes the date and time followed by the Point s description set at time point added point added by the add point automation process will be named Point You may toggle between points to select the one you choose Copyright O 2004 Radix Technologies Ltd 19 Radix Business Protector User Guide Caution All Restore Points stored at later date time will be permanently erased during system restoration to a certain Restore Point 3 Click Yes to confirm the restore process Auto Save amp Restore procedures Radix Protector can be set to automatically Save amp Restore points in an automated procedure When Auto Process is selected the main menu is not displayed Please see the Boot Methods section of this guide Note In order to display the Protector menus at any given time press Alt F10 when the line Starting Radix Protector is displayed Copyright O 2004 Radix Technologies Ltd 20 Radix Business Protector User Guide Monitoring Radix used space area Buffer Monitoring Radix space In order to monitor the buffer condition move the mouse cursor on to the blue icon on the bottom right hand side of the system tray The used buffer area is being displayed when the cursor is placed on the icon for a second You may also double click the blue icon cal 10 30
9. whether that License Agreement is presented for acceptance the first time that the third party software is invoked is included in a file in electronic form or is included in the package in printed form 2 License Granted 3 For all Radix intellectual property and proprietary rights related to the Product Radix grants the Licensee a non exclusive and non transferable License to use the Product for personal or internal business purposes only Restrictions Except as otherwise specified in this License Agreement Licensee may not a Modify or create any derivative works of the Product or documentation including translation or localization b Decompile disassemble reverse engineer or otherwise attempt to derive the source code for the Product except to the extent the applicable laws specifically prohibit such restriction c Encumber sell rent lease sublicense or otherwise transfer rights on or related to the Product d Remove or alter any trademark logo copyright or other proprietary notices legends symbols or labels in the Product or e Publish any results of benchmark tests run on the Product to a third party without Radix s prior written consent such consent to be given at Radix s sole discretion 4 Termination Without prejudice to any other rights Radix may terminate this License Agreement by prior written notice in any event where the Licensee breaches any of the terms and or condition of this License Agreement Upon te
10. Points snapshots as they want and in the event of failure instantly restore their computer to C While Radix Protector has been thoroughly safety tested other factors such as power failure previous working condition without knowing the cause of the problem how to solve it and without having to corrupted files and hardware defects can put your data at risk In order to avoid such cases we wait for technical service recommend that you backup your hard disk content to a backup device D Verify that your system is not infected with viruses E Verify that your hard disk content is free of corrupted files using a hard disk checking program e g SCANDISK F Make sure all disk space is allocated and there is no empty unallocated disk space If there is any disk space which is not part of a partition create a partition using that space and format it G Verify that your system is not compressed with disk compression software H Perform a complete system defrag of all drives even if you install the Radix Protector in a new PC Radix Business Protector MLP PCI form factor Radix Protector installation requires certain technical skills and knowledge of the computer s hardware and operating systems If you have any doubt please consult Radix tech support or your local dealer for assistance If you are inexperienced user do not attempt installation as it could result in data loss pr J In case you face any problem during
11. ager password Click Next when you are done If you did not defrag your system yet please run Defrag now Click Finish to restart your computer After computer is restarted the following message will be displayed Building Radix Protection At this point the system is being installed using the selected parameters Caution When the message Building Radix Protection is display do not turn off the computer s power This process may last a few minutes After system building is completed the following message should appear Starting Radix Protector If the Radix Protector USB is not connected to the system the following message will be prompted Ls Please insert Radix Key and press lt Enter gt Insert the Protector into the USB port and press lt Enter gt to continue Copyright 2004 Radix Technologies Ltd 10 Radix Business Protector User Guide Radix Business Protector User Guide If you chose one of the automation processes such as Management amp Configuration Keep every boot There are several ways for using the Radix Protector You need to determine the best suited for you Restore every boot During Radix Protector installation process the major configuration options can be set but many After performing the automated selected task restore or keep the Radix Protector s menu will not be configuration options may be changed or set later prompledand Windows Oper
12. ake sure the status icon is red noting Manager Mode 5 Run Scandisk and Defrag normally 6 Restart the system Copyright O 2004 Radix Technologies Ltd 24 Radix Business Protector User Guide Troubleshooting FAQ Question When I turn on the PC I get the following message Radix Protector not found Press Enter to restart Why Answer Make sure you have Radix Protector MLP card inserted to your system on a PCI slot Make sure it is Radix Protector MLP and not a different version If card is present please try to move it to other available PCI slots Try to set the boot priority in the BIOS so that the first boot option will be LAN or Option ROM Replace card since it may be damaged Question When I install Radix Protector MLP the installation process skips the DOS configuration screen and loads Windows without finishing the protection installation Answer e Make sure your Windows based Virus protection is disabled e Make sure BIOS virus protection is disabled e Make sure you have enough free disk space and system is defragged e Run Scandisk to make sure the disk is OK e Install Radix Protector again Question Windows is not installed on the Primary HDD partition can still install Radix Protector MLP and protect the system Answer e Radix Protector MLP is designed to protect the Primary Partition please install Windows on the first primary partition Question Can Radix Protector MLP pr
13. aung syerem Wi lgad Once the Radix Protector is installed you may configure different options to your specific needs Note In order to display the Radix Protector s menu press Alt F10 when the line See Working with Radix Protector to discover the most suitable configuration for you Starting Radix Protector is displayed Note In order to display the Protector menus at any given time press Alt F10 when the line Starting Radix Protector is displayed Congratulations Radix Protector is successfully installed Installation switches Radix Protector MLP i You may run the Windows setup process completely unattended and set all the setup parameters VIA command line Current Boot selection is WinXP MLPSetup s up n ap b def r keep changes and run windows Add Rest Point Default Add a neu Restore Poin ls 101 i Set Radix space 0 500MB 1 1GB Set User Password NO SPACES Restore to a sclected Point 11 characters Set boot partition name NO SPACES Set Admin password NO SPACES Saue changes permanently b 0 1 2 Set boot method 0 Display menu 1 Restore every boot 2 Keep every boot Select a boot partition 05 def O Run defrag after setup 0 No 1 Yes RE Reboot after setup 0 No 1 Yes Management and conf igurat ion Example SLPRSetup 6 32 s 1 up 1234 n Windows ap 12345678 b 1 def 0 r 1 Result Install a
14. d XP Windows 98 on a SCSI HDD is not supported Question Does Radix Protector MLP support Raid systems Answer e Radix Protector MLP supports some types of Raid controllers and Raid technology Please consult with Radix for further information Question I have older version Radix Protector MLP can I install new version Answer e Yes but you have to first uninstall the older version When uninstalling the MLP make sure you save the system first otherwise data will be lost Question After installation system halts after Starting Radix Protector MLP Why Answer e Change HDD I O protection to no protection under configuration menu e Reinstall Radix after you ran the MBR clearing process scandisk and defrag e Run3 party fix disk tool to fix partition errors and install Radix again Question After installation under Windows a message Not enough disk space appears in DOS mode Why Answer e There is not enough disk space Radix Protector MLP needs at least 300 MB Win98 of free disk space and about 700MB WinNT 2K XP from the last partition e The last partition is not formatted please format the partition e You PC BIOS spans in to the HDD and does not allow Radix to be installed Question Under Windows Radix installation a message Non standard HDD partition structure cannot install Radix Protector MLP Please exit installation appears Why Answer e The standard disk structure
15. disable the following users functions The disabled items will not be displayed on the Main menu e Add a new Restore Point e Restore to a selected Point e Save changes permanently This will enable the managers full control over user s ability to manage restoration tasks To Enable Disable options click the arrow of the selected option or use the up down arrow keys to go to the selected option and the left right arrow keys to toggle the selection Enable 4 gt Press Yes to save changes and exit Copyright 2004 Radix Technologies Ltd 14 Radix Business Protector User Guide Configuration In order to modify Configuration options on Main Menu click Configure The System Configuration screen will appear System configuration Main Menu Manager Mode Displag mieli 800X600 256 Prevent floppy disk boot Disable HDD Restore Boot sequence A C HDD Save HDD 1 0 protection No protection 4 f gt CMOS protection No protection Conf igure gt ne AE Boot methods Display menu EE Management Clear share disk Do not clear Drivers Check gt Uninstall PEAS Eie Exit ts e Setting up the different options can be done by clicking the arrow of the selected option or use the up down arrow keys to go to the selected option and the left right arrow keys to toggle the selection Display mode Setting the screen resolution This
16. he following screen will help you move the store folder content and definitions to a different location J Radix Protector MLP Setup x Setup Wizard My document C My Documents Browse Favorites JCAWINDOWS Favorites Browse Outlook Express Outlook Default 71 Cancel The following data folders can be moved e My Documents e Favorites e Outlook Express e Outlook Choose the location to move folders by clicking the Browse and selecting the new location By clicking next the folders with it s content will be moved to the new location Copyright 2004 Radix Technologies Ltd 9 5 6 7 Radix Business Protector User Guide Setting Radix Protector parameters J Radix Protector MLP Setup x Setup Wizard Partition name User password win8 Boot methods Confirm user password Display menu v Manager password Confirm manager password Default Cancel e Partition name Mainly used for multi boot selection See Working with multi boot e Boot methods Setting Radix Protector automation See Boot methods section e User password Setting the User password this will allow system manager to control and restrict users options See Modify users password e Manager password Setting the Manager password will allow you to control and restrict the modifications of Radix Protector parameters by unauthorized users See Modify Man
17. ill contain the OS already installed In order to install OS on the second and third and forth if available 1 Click Management and Configuration on Main Menu 2 Click Manager Mode 3 Select the desired boot partition 4 Install the OS as usual or dump an already prepared image to the selected partition 5 Install Radix Protector MLP setup in the newly installed Windows Follow these steps until all OS installations are completed Copyright O 2004 Radix Technologies Ltd 23 Radix Business Protector User Guide Using Scandisk amp Defrag With Radix Protector Caution Scandisk and Defrag operations are strictly forbidden on a protected system unless Radix Protector is set to Manager mode When the Radix Protector is already installed Scandisk operation is meaningless since the files structure and the HDD space occupied by Radix Protector cannot be recognized by the Scandisk mechanism False information is displayed and many bad sectors are being detected Obviously the available disk space is not defective and is constantly being monitored by the Radix Protector mechanism Running Defrag is also prohibited when working in User Mode Running Scandisk and Defrag In order to run the Scan Disk and Defrag process when Radix Protector is already installed please follow the following steps 1 On main screen click Management and Configuration 2 Click Manager Mode 3 Run Windows 4 M
18. installation please stop the installation process and consult Ss Radix tech support or your local dealer for further assistance K If you do not accept the above terms please do not install or use the Radix Protector products Radix Laptop Protector USB form factor Copyright O 2004 Radix Technologies Ltd 5 Copyright O 2004 Radix Technologies Ltd 6 Radix Business Protector User Guide System Requirements Before installing Radix Business Protector please make sure your system meets the following minimum requirements e IBM 486 PC compatible or later e Available PCI slot or supported USB port e Minimum 8GB HDD capacity e Microsoft Windows Operating System Win98 WinME WinNT Win2K or WinXP e Atleast 500MB free disk space on the end part of the HDD e No boot managers installed System Preparation 1 Disable all pre installed anti virus software Your Anti virus can be enabled after Radix Protector installation 2 Disable virus protection function in the system BIOS BIOS virus protection function can be enabled after Radix Protector installation process 3 In case your HDD includes more than 3 primary boot partition please remove the last primary partition or convert it to an extended partition using a HDD partitioning utility For best performance it is recommended to install Radix Protector on a fresh PC new Windows installation this will avoid carrying and preserving problematic old software in
19. irtual No part of this manual may be copied or transmitted in any form or by any method electric or mechanical means included for any purpose without prior written permission from Radix Radix owns the property for purposes of its application utility trademark copyright or other intellectual properties covered in this documentation or has patent rights being applied for Unless written authorization has been issued and obtained from this company the above items shall not be allowed to be used arbitrarily Under copyright laws neither the documentation nor the software may be copied photocopied reproduced translated or reduced to any electronic medium or machine readable form in whole or in part without the prior written consent of Radix Copyright 2004 Radix Technologies Ltd 4 Radix Business Protector User Guide Radix Business Protector User Guide What is Radix Business Protector System Requirements and preparation Radix Business Protector is an instant recovery solution primarily designed to protect business and home Before Installation computers desktops or laptops where users constantly produce new data e mails work files Internet downloads applications updates etc and make frequent configuration updates new applications new A Read this User Manual thoroughly games etc B Backup your data files The Radix Business Protector includes a unique recovery technology that allows users to create as many Restore
20. k computer shows internet caf s learning centers etc Schedule Restore This option will restore the system to Point 0 at fixed time intervals Setting the time interval will be done after clicking the Yes button Keep Last Boot Status The Main user menu will not be displayed during boot and there will be no changes to the system content It is as the user is clicking Keep changes run Windows every boot Note In order to display the Protector menus press Alt F10 when the line Starting Radix Protector is displayed Copyright 2004 Radix Technologies Ltd 16 Radix Business Protector User Guide Radix Business Protector User Guide Clear share disk i i Working with Radix Protector MLP Please see working with multi boot section of this guide Working with Radix Protector MLP differs by the way you configure it during Radix installation or Drivers configuration If you get Drivers not found error when trying to boot set drivers check to Do not check otherwise do At this point we assume that the working mode boot method selected is Display menu which needs not change this option user interaction and decision to proceed If any of the automation sequences were selected by pressing Alt F10 you can bring up the menu just as it is when working in Display menu mode Automation sequences booting directly to Windows without Caution Save command permanently st
21. o Windows without stopping on the user menu while performing the Restore Add point or Keep tasks Boot methods Display Menu The User s main menu will be displayed at every boot The user can decide what to do next and how to manage the protection and restoration tasks This is the default and recommended option for maximum user flexibility for novice users it is recommended to select one of the following automation sequences Scheduled Multi Point Save You may set the system to automatically add a new Restore Point during boot at a fixed time interval i e every XX amount of time The system will add a new Restore Point at the next boot that passed the period of time longer than the set fixed time interval We recommend setting the added Restore Point interval for two days a Point will be added at every other day during restart Example Set the system to add a new Restore Point every two days After one day reboot the system no Restore Point will be added during boot Keep the computer On for another day and then reboot the system a new Restore Point will now be added since the total time accumulated is now two days Setting the time interval will be done after clicking the Yes button Recover Every Boot This option will restore the protected partition to Point 0 during every system boot This option is most recommended for public access computers i e library help des
22. ores the current status of the protected stopping on the user menu while performing the Restore Add point or Keep tasks partition and make it the new Point 0 All prior existing Restore Points will be erased Adding A New Restore Point Using the Radix Protector MLP users have the ability to add scores of Restore Points A restore point is a snapshot of the current condition of the protected partition At any time user can add a new restore points reflecting the current status of his HDD i e before performing new installation after data change a daily point etc Radix Protector MLP Current Boot selection is WinXP Add Point keep changes and run uindous Mel nim Hios neis Poing Restore to a selected Point Save changes permanent ly Please input Restore Point name Point Select a boot partition OS No Management and conf igurat ion 1 To add a new point enter a name to the point The date and time automatically added by the system to every point Note It is recommended to name the point with a title most suitable that will describe the content of the point The point name can also describe an action yest to be performed like Before Office installation 2 Name the Restore Point Give the new point a title with a short description of the changes made This information will help you later in choosing the right recovery point when needed
23. ot what should I do Answer e Run the MBR fix process e Set the primary partition to active using fdisk Question When try to enter the Main Menu using Alt F10 during boot it does not stop and bring the Main Menu up and runs Windows why Answer e Hold the Alt key down when you see the message Starting Radix Protector and repeatedly press F10 key When the Alt key is down e lf you are using Microsoft keyboard make sure the button that lock the function key is not selected e Try to change the keyboard Copyright 2004 Radix Technologies Ltd 29 Contact Information Radix Israel Ltd 126 Hageffen Street Hemed 50295 Israel Web www radix co il E mail info radix co il Tel 972 3 9606350 Fax 972 3 9607104 Technical Support Email support radix co il Sales E mail sales radix co il Copyright 2004 Radix Technologies Ltd Radix Business Protector User Guide 30 Notes Radix Business Protector User Guide Copyright O 2004 Radix Technologies Ltd 31
24. otect Linux OS Answer e No For Linux based OS please use Radix Protector LNX Question How can install Multiple operation systems on the same HDD Answer e Radix Protector MLP supports multiple operating system on the same disk using the build in multi boot manager Every OS should be set on a different partition Please see working with mutli boot section on this guide Question During Windows part of the installation get an error message about the partition type what does it mean Answer e Your partition structure or master boot record is invalid e You have more than three primary partition convert one partition to extended Question After installation on Windows 98 I have a collusion yellow in the device manager why Answer e You have installed a 3 party bus master driver please use standard Windows bus master driver Copyright 2004 Radix Technologies Ltd 25 Radix Business Protector User Guide e Reinstall re install Radix Protector MLP Question I installed Radix Protector USB but even if the USB is in the USB port the system tells me to insert the key and press lt enter gt why Answer e You did not plug the USB key in to the main USB port try to plug it to a different port e You have plugged the USB key to a USB HUB please connect it directly to the PC e Your USB port is not supported Please consult Radix Question When I plug the card I get a message Wrong Key why
25. ring the HDD for Multi boot Preparation for Multi boot should be done before Radix Protector MLP installation If your Windows multi boot system is already installed you may need to remove it unless both OS are installed on the same partition For example if your system includes Windows XP and Windows 98 installed and managed by the build in Windows XP boot selection menu and both OS are installed on the same partition you do not have to reconfigure the partition But in case the same configuration is installed on two separate partitions you must remove the second OS In order to set more than a single boot OS you will need at least two HDD partitions If your HDD is already installed and prepared and contains a single partition is it recommended to use a partitioning tool that supports on the fly partition change or any other third party partitioning tool to resize the partition and create new partitions before installing the Radix Protector MLP Setting partitions as boot data or shared partition After creating the number of partitions you want on your system one primary partition and as many extended partitions you desire you may set them as boot partitions data partition or shared partition Boot partitions are the partitions carrying the OS and visible in the boot selection menu These partitions are NOT visible in Windows mode one to the other Data partition is the partition available and
26. rmination Licensee shall destroy all copies of the Product 5 Intellectual Property and Proprietary Rights Radix shall retain the sole and exclusive ownership of all rights title and intellectual property rights in and to the Product and all modifications and enhancements thereof This License Agreement does not provide Licensee with title or ownership of the Product Licensee shall not take any action to jeopardize limit or interfere in any manner with respect to the Product with Radix or its supplier s rights The Product is treated by Radix as confidential and contains substantial Radix trade secrets Licensee shall keep confidential at all times during and after the expiry of the term of this License Agreement any and all information relating to the Product including but not limited to the machine readable object code and other information which is not generally known to the public and shall ensure that its directors and employees observe the foregoing confidentiality obligation The Product is protected by all the relevant intellectual property laws and by international treaties The title and all related rights in the content accessed through the Product is the property of Radix and or the applicable content owner and is protected by applicable law The License granted under this License Agreement gives the Licensee no rights to such content 6 Liability Limitation To the maximum extent permitted by applicable law in no event shall Radix or
27. stallations viruses un needed files corrupted FAT entries existing registry problems etc Copyright O 2004 Radix Technologies Ltd 7 Radix Business Protector User Guide Installation Hardware Installation If you are about to install Radix Laptop Protector USB version you may skip the Hardware Installation section and start with Software installation Caution If you are not 100 confident in your ability to perform the hardware s installation please consult your local hardware dealer 1 Turn PC power off 2 Remove PC cover 3 Insert the Radix Protector card into a free PCI slot white slot 4 Mount the PC cover and turn the PC power on yy Note In case Windows does not properly load go to Troubleshooting section Copyright O 2004 Radix Technologies Ltd 8 Radix Business Protector User Guide Software Installation Note You must verify that Windows is properly running before installing Radix Protector software Note In case you would like to install the Radix Protector on a multi boot system please go to the Working with Multi Boot section If you have not done this yet run Scandisk and Defrag now Windows installation 1 Double Click on MLP Setup file in the installation media 2 Confirm if you have backup If you do not have backup please backup your data now 3 Select Radix space Recommended 1GB The Radix space is used as dynamic buffering system 4 T
28. the protected partition e You may also use save command to permanently save data and clear restore points which take up space from the partition Question After Radix Protector MLP is working for a while when trying to get in to manager mode get the following message Driver is not installed or damaged why Answer e MLP Windows driver was corrupted please reinstall Radix Question After Radix installation I get the following message Cannot find driver what should do Answer e Enter the configuration menu and under configure menu set the driver check to do not check e For Wings Make sure that diskhook vxd is found in Windows System losubsys directory e For WinNT Make sure diskfilt sys and diskhook vxd found in the Windows System32 Drivers directory e For Win2K XP Make sure you have the file DISKFILT SYS in CAPITAL letter found in the Windows System32 Drivers directory Copyright 2004 Radix Technologies Ltd 28 Radix Business Protector User Guide Question I have created more than 25 restore points but I can only see 24 points why Answer e The display area only shows 24 points at a time but all your points are there When you start restoring points older points will reveal one by one Question My mouse is not working in Radix configuration screen why Answer e Some PC BIOS do not support USB before Windows is running Question After uninstall Radix system does not bo
29. utomatically create 1GB Radix space Set user password to 1234 Boot partition name is set to Windows Admin password is set to 12345678 system restore at every boot no defrag will be run Radix Business Protector main screen System reboot when setup is done Press Management and configuration on main screen to enter the Configuration Menu You may use your pointing device some USB pointing devices may not work at this stage to click the Management and configuration button or use the arrow keys to move and Enter key to select Note All parameters are mandatory any parameter entered incorrectly with no valid value or missing the default parameter will be applied P Ka Copyright 2004 Radix Technologies Ltd 11 Copyright 2004 Radix Technologies Ltd 12 Radix Business Protector User Guide Management Click Management on Main Menu in order to modify Management options The User Management screen will appear Main Menu User Management Manager Mode Activate Boot Function Modify Username Modify User Password Conf igure b gt Modify Manager Password Management Uninstall gt HDD Restore HDD Save Configure Partition Properties Disable Itens Exit Modify Username The Username is a description or the name of a boot partition During installation the default Username is the name of the Operating System installed on a specific partition
30. version is set to a fixed 800x600 display Prevent floppy disk boot Enabling the Prevent Floppy Disk Boot will verify that the floppy drive boot option will be disabled Boot sequence Select the boot sequence to set the boot order of your system boot devices HDD 1 0 protection The HDD I O protection will protect the first sectors of the disk from direct I O attempt There are two protection options Advanced This will protect all sectors with the powerful algorithm Standard This will protect all sectors but will exclude the advanced BIOS level algorithm Select this option when Advanced cannot work In some un predetermined cases the Advanced option will halt the PC because of the different BIOS types which attempt disk saving CMOS protection CMOS settings can be protected by selecting the protection type Complete This will protect all CMOS options Standard This will protect the standard CMOS options same in every BIOS type like HDD settings etc Select this option when Complete cannot work In some un predetermined cases the Complete option will halt the PC because of the different BIOS types which have unique parameters which are not supported Copyright 2004 Radix Technologies Ltd 15 Radix Business Protector User Guide Boot methods By changing the Boot methods you may be able to set the automation sequences e g booting directly t
31. visible in Windows to its selected boot partition Shared Partition is a data partition visible to all boot partition therefore called shared Installing Multi boot systems After setting the partitions install Windows on the first primary partition Install Radix Protector MLP as explained in the Radix Protector MLP installation steps on the OS you just installed The OS on the primary partition 1 After Radix Protector MLP installation on main menu Click Management and configuration 2 Click Management 3 On Management click Configure Partition Properties 4 The list of available partitions will be displayed 5 Toggle the displayed partition and set them to be Boot partition Data partition or Shared partition Copyright 2004 Radix Technologies Ltd 22 Radix Business Protector User Guide After saving changes on main menu click Select a boot partition OSY The boot partition list on the right side will display the available boot partitions you saved Radix Protector MLP i Current Boot selection is WinXP Select a boot partition 05 keep changes and run windous og Add a new Restore Point C Win2K Restore to a selected Point Save changes permanent ly C Win98 Seloack va hook ypaekleton NS Management and conf igurat ion As you can see we now have 3 boot partitions Installing OS on other boot partition The first boot partition w
32. x Business Protector User Guide E Ae EE eee dnecnate teen T 5 Radix Business Protector User Guide Monitoring Rad SP CG me 21 Cleaning Ne Radixspace Ea ANG AE 21 Working with Multi Boot Multiple OS siennes 22 Working with Multi boot description 22 Preparing the HDD for Multi DOO Late ae een denied 22 Setting partitions as boot data or Shared partition rrrnnrrnrnnnnnnovrnrrrnnnnnrrrrnrrrrnnnnrrrrrnnnrnnnnn 22 Mstalng Mak DOS SES user 22 Installing OS on other boot partition 23 Using Scandisk amp Defrag With Radix Protector ss 24 Running Scandisk and Dei ag issn sitter Nine 24 TONE ON pecs ce bc sucta eaae a aerga ton dea tots pet e a A a aE tentnek porate Suse 25 NORE ERE EN EE EEE EE EE 25 Gonactnbmalasas2rvse AE 30 NN 31 Copyright O 2004 Radix Technologies Ltd Radix Business Protector User Guide License Agreement By installing or using Radix Protector hardware and or software hereinafter referred as the Product the individual or entity licensing the Product hereinafter referred to as Licensee agrees to be bound by and become a party to this License Agreement If you do not accept all terms of this License Agreement do not install or use this product 1 License Agreement In this License Agreement Radix Technologies Ltd shall hereinafter be referred to as Radix The use of any third party software product included in the Product shall be governed by the third party s License Agreement
33. you may modify it to any name 1 Click Modify Username 2 Click the Username you wish to change 3 Type in a new name up to 11 characters Click Exit then Yes to save the new Username and return to User Management screen Modify User Password User passwords prevents access of unauthorized users to the selected OS environment and to the user options such as adding a new restore point and restoring the system Setting the User Password is recommended step for security boot prevention no password no boot 1 Click Modify User Password 2 Click the User you wish to apply the password to 3 Enter password up to 8 digits and or characters case sensitive 4 Click Yes to accept password 5 Click Exit then Yes to save password and return to User Management screen Copyright O 2004 Radix Technologies Ltd 13 Radix Business Protector User Guide Modify Manager Password If you have not done this under Windows installation process you may set the manager password at any time You may also modify an existing password Setting the Manager Password will help you prevent configuration changes by an unauthorized person 1 Select Modify Manager Password 2 Enter password up to 8 digits and or characters case sensitive 3 Re enter password 4 Click Exit to finish Configure Partition Properties Please see Working with Multi Boot section of this guide Disable Items Manager has the ability to
Download Pdf Manuals
Related Search