Operating Instructions
Contents
1. adjustment ring to tighten the extension column in an appropriate position BLADE AND GRILLES ASSEMBLY 1 Unscrew the spinner clockwise and the nut counter clockwise then remove both of them Set the rear grille in the proper position with handle up Screw on plastic nut tightly to attach rear guard Discard plastic sleeve on motor shaft Install the blade onto the motor shaft until it reaches the retaining pin Screw spinner on to motor shaft counter clockwise Press the rim of the front guard onto the rear guard until the front guard is properly fitted Secure both guards firmly by tightening the fan guard locking screws and nuts OTe O NO OPERATING INSTRUCTIONS 1 To make stop the fan head oscillate push down pull up the oscillating 2 The air flow can be adjusted upward or downward by pushing the grilles slightly to the desired up or down direction 3 The height of the fan can be adjusted by loosening the height Adjustment ring carefully raising or lowering the fan and firmly re tightening the ring 4 Speed is controlled by depressing the speed switch 4 position 0 on off 1 low 2 medium 3 high 5 Plug the power supply cord into a wall outlet CLEANING 1 Be sure to unplug from the electrical supply source before cleaning 2 Plastic parts should be cleaned with mild soap and damp cloth or sponge Thoroughly remove soap film with clean water 3 Be sure not to make water or other liquid en2. 3 SPEED OSCILLATING STAND FAN Operating Instructions READ AND SAVE THESE INSTRUCTIONS CAUTION Read Rules for Safe Operation and Instructions Carefully WARNING 1 Keep electrical appliances out of reach from Children or infirm persons Do not let them use the appliances without supervision 2 Ensure that the fan is switched off from the supply mains before removing the guard 3 If the supply cord is damaged it must be replaced by manufacturer or its service agent or a similarly qualified person in order to avoid a hazard RULES FOR SAFE OPERATION 1 Never insert fingers pencils or any other object through 2 the grille when fan is running Disconnect fan when moving from one location to another f _ SCREW 3 Disconnect fan when removing grilles for cleaning rile WASHER 4 Be sure fan is on a stable surface when operating to avoid overturning ji 5 DO NOT use fan in window rain may create electrical hazard WASHER PARTS NAME 1 Front grille 2 Spinner 3 Blade 4 Plastic nut 5 Rear grille 6 PVC sleeve 7 Oscillating 8 motor 9 Fan body 10 Screw 11 Inner tube 12 Height adjustment ring 13 screw 14 Stand ornament 15 Base 16 Outer tube 17 Power cord 1 8 Speed switch BASE ASSEMBLY Take the base and column parts from the packing box and loose the 4 screws Fix the column on the base plate using the 4 sets of screws Unscrew and take off the height adjustment ring mount the column ornament and screw the height
3. ter the inside if motor
Download Pdf Manuals
Related Search