USER MANUAL KT
Contents
1. SQL SQUELCH ADJUSTMENT Squelch System allows you to mute the background noise when no signal being received The Squelch system make Standby operation more pleasant and significantly reduces battery current consumption Please adjust the Squelch level according to the following instructions 1 Press MENU LOCK rotate the DIAL knob come to MENU 3 SQL 2 Then press U V key come to the default setting level SQL5 3 Clockwise or counterclockwise rotation of DIAL knob to adjust between 0 1 2 3 4 5 6 7 8 9 Default Squelch level as 5 4 Select the level at which the background noise is just eliminated when there is no signal Press U V key to save the setting 5 Press MENU LOCK or PTT EXIT to normal operation 18 LIGHT LCD ILLUMIN ATION ON KEY OFF Radio includes a reddish illumination lamp which aids in nighttime operation The red illumination yields clear viewing of the display in a dark environment with minimal degradation of your night vision Three options for activating the lamp are provided Key llluminates the LCD when any key pressed ON Illuminates the LCD continuously OFF Disables the LCD lamp Here is the procedure for setting up the Lamp mode 1 Press MENU LOCK rotate the DIAL knob come to MENU 4 LIGHT 2 Then press U V key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to set ON OFF KEy 4 Press key to save the setti2. the Battery Charger as shown in the illustration to the EXT DC Jack If only 12 16 Volt DC power 4 is available the optional DC Adapter with its cigarette lighter plug may also be used for charging the battery While the battery is being charged the display will indicate See PIC 5 this S meter will deflect accordin g to the charging status and the TX BUSY indicator will glow red When the charging is finished the TX indicator will glow green The charger is only designed for the charging of our battery and is not suitable for other purposes Please be advised that the charger may contribut e noise to TV and radio reception in the immediate vicinity so we do not recommend its use adjacent to such devices SS SS NS NN Important Note 1 Perform the battery charging where the ambient temperature range is 5 35 Charge out of this range could cause damage to the battery pack 2 If the charge is not completed in several hours the battery may be deteriorated Do not attempt to forcibly charge the battery please contact the dealer 3 If you do not use the transceiver for a long time remove the battery pack from the transceiver as battery leakage could cause damage to the transceiver and the battery pack 4 While in storage the charge will drain slightly over time and the battery should be recharged 50 each six months GETTING ACQUAINTED ANTENNA Jack LCD PTT Switch F ALERT
3. LAMP FM will be invalid UV MODE Just press to switch the VFO UHF Mode and VHF Mode Press and Hold to switch frequency control between VFO and Memory Systems LAMP FM Just press to light the Torch Press and Hold to activate the FM Radio Function F MENU LOCK Press the F ALERT then press MENU LOCK to Activate the Scanning Function F UV MODE Press the F ALERT then press UV MODE to Activate the Memory Write mode for memory channel storage F DIAL Press F ALERT then rotate the DIAL knob to increase or decrease the frequency at 1MHz VOL MON DIAL Press VOL MON then rotate the DIAL knob to adjust the volume level NL LCD DISPLAY The display icons appear when certan operatiors are performed or certain specific features are activated It will help you to know the meaning of the indicator and know how to set functions FM DW Low vox w cum voL 7177 111 ICON DESCRIPTION N Secondary Keypad Active Press F ALERT 28 Operating Band Number or Memory Channel Number CTCSS Operation DCS Operation Una UHF 400 470MHz VHF 136 174MHz FM FM Radio 87 108MHz LOW Low High Output Power vox VOX Function Active Wide Narrow Bandwidth Keypad Lock Active Keypad Beeper ON Repeater Shift Direction a Battery Indicator E DW Dual Watch Active musumu
4. the volume level ADVANCED OPERATION RXCODE You may sometimes want to hear calls from only specific persons or groups In this case use the selective call allows you to ignore unwanted calls from other persons who are using the same frequency Set the receiving signal according to the below instructions 16 1 Press MENU LOCK rotate the DIAL knob come to MENU 1 RXCODE 2 Then press U V key enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to select from OFF 67 0 754N press MENU LOCK again to select the code Positive or negative such as 023N 023l OFF gt 67 0 023N gt 023l NOTE CTCSS 67Hz 254 1Hz 50 groups DCS 023N 754N 104 groups 4 Press U V key to save the setting and EXIT Press MENU LOCK or PTT EXIT to normal operation TXCODE Set the transmitting signal according to the below instructions 1 Press MENU LOCK rotate the DIAL knob come to MENU 2 TXCODE 2 Then press U V key enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to select from OFF 67 0 754N press MENU LOCK again to select the code Positive or negative such as 023N 023l gt OFF gt 67 0 gt 023 gt 023l 17 NOTE CTCSS 67Hz 254 1Hz 50groups DCS 023N 754N 104 groups 4 Press U V key to save the setting and EXIT Press MENU LOCK or PTT EXIT to normal operation
5. transceiver has been factory programmed in order to use the product immediately after purchase The programming includes the activation of channels frequencies in the VHF and UHF FM Amateur Bands according to the technical rules in force for the use of this bands NOTICE This transceiver is programmable via PC using the dedicated software and the PC interface cable optional items Any programming or modification of the original default setting must be made by a specialised technician or by an authorised service centre Some functions of this transceiver might be programmed in violation of the technical rules in force for the use of the VHF and UHF FM bands It is the user s responsibility to check that any modification to the programming will be done in compliance with the current regulations Any modification to the product alteration of the internal circuit of the external structure of the radio or any programming in violation of the current regulations will automatically void the product certification and your right to use the product INTEK S R L declines any responsibility concerning any modification of the product made by the user or by a third party after delivery of the product ceo 0 X EZ PRECAUTIONS Refer service to qualified technicians only Do not disassemble or modify the transceiver for any reason Do not expose the transceiver under direct sunlight long or to extremely hot condition Do n
6. 11 SHIFT 2 Then press U V key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to select the repeater shifts 0 4 Press U V key to save the setting 5 Press MENU LOCK or PTT EXIT to normal operation STE Tail Tone Elimination To eliminat e the annoyin g audio caused by carrier wave disappearing after the transmitter ends the communication You should enable the Tail Tone Elimination On the contrary if you want communication via the repeater you should disable the Tail Tone Elimination 1 Press MENU LOCK rotate the DIAL knob come to MENU 12 STE 2 Then press U V key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to select the STE ON OFF 4 Press U V key to save the setting 5 Press MENU LOCK or PTT EXIT to normal operation 24 W N Wide Narrow Band Selection 1 Press MENU LOCK rotate the DIAL knob come to MENU 13 W N 2 Then press U V key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to select the WIDE NARROW 4 Press U V key to save the setting 5 Press MENU LOCK or PTT EXIT to normal operation SAVE Battery Saver The radio includes a useful Transmit Battery Saver which will automatically lower the power output level when the last signal received was very strong For example when you are in the immediate vicinity of a repeater station the
7. DIAL knob come to MENU 18 BCLO 2 Then press U V key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to select the BCLO ON OFF 4 Press U V key to save the setting 5 Press MENU LOCK or PTT EXIT to normal operation PRI Priority Channel Scanning 1 Press MENU LOCK button then rotate the DIAL knob coming to MENU 19 PRI 2 Then press U V key to enter the setting mode 3 Clockwise or counterclockwise rotation of DIAL knob to set PRI ON OFF 4 Press U V key to save the setting 5 Press MODE or PTT button to the normal operation 28 ADDITIONAL FUNCTIONS AND SETTINGS MEMORY CHANNEL STORAGE Memory Channels 01 99 Store the Memory Channel according to the following instructions Select the desired frequency while operating in the VFO mode Be sure to set up any desired CTCSS or DCS tones as well as any repeater offset Press F ALERT button then press U V key Channel 01 99 will flash on the LCD rotate DIAL knob to store the channel between channel 01 99 Press U V key to save the setting Repeat the process above to store other channels Note Repeater offset frequency should be set via programming software EMERGENCY ALARM FEATURE Press and hold the F ALERT button about 1 2 seconds to the Emergency Alarm Mode emergency alarm will be heard press PTT button EXIT to normal operation FM RADIO FUNCTI
8. INTEK KT S50EE DUAL BAND AMATEUR RADIO VHF UHF FM POCKET SIZE HANDHELD TRANSCEIVER 144 146 MHz 99CH 2W 430 440 MHz 99CH 2W PC PROGRAMMABLE KT INSTRUCTION MANUAL claration of Conformi EC Certificate of Conformity to EC Directive 2006 95 2004 108 99 5 DECLARATION OF CONFORMITY With the present declaration we certify that the following products INTEK KT 950EE comply with all the technical regulations applicable to the above mentioned products in accordance with the EC Directives 2006 95 EC 2004 108 EC 99 5 EC Type of product Amateur Radio Equipment VHF UHF Details of applied standards EN 300 086 1 V1 3 1 EN 300 086 2 V1 2 1 EN 301 489 1 V1 8 1 EN 301 489 5 V1 3 1 EN 60950 1 11 Manufacturer INTEK S R L Via G Marconi 16 20090 Segrate Italy Tel 39 02 26950451 Fax 39 02 26952185 E mail intek com intek com it Notified Body EMCCert Dr Rasek Boelwiese 5 91320 Ebermannstadt Germany Identification Number 0678 Contact Reference Armando Zanni Tel 39 02 26950451 Fax 39 02 26952185 E mail intek com Q intek com it Segrate 04 11 2011 dr Vittorio Zanetti CEO GENERAL DESCRIPTION The transceiver is a micro miniature multiband FM transceiver with extensive receive frequency coverage providing local area two way amateur communications along with unmatched monitoring capability We appreciate your purchase of our transceiver and enco
9. K or PTT EXIT to normal operation STEP Channel Spacing Selection Radio s frequency synthesizer provides the option of utilizing channel steps of 5 6 25 10 12 5 25KHz per step optional values differ depending on the band selected If you need to change the channel step increments the procedure to do is very easy 22 1 Press MENU LOCK rotate the DIAL knob come to MENU 9 STEP 2 Then press key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to select the new frequency step size 5 6 25 10 12 5 20 25 KHz 4 Press U V key to save the setting 5 Press MENU LOCK or PTT EXIT to normal operation OFFSET Repeater Operation KT 950EE includes a number of features which make repeater operation simple and enjoyable 1 Press MENU LOCK rotate the DIAL knob come to MENU 10 OFFSET 2 Then press key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to set the offset frequency 0 37 995 0 69 995 4 Press U V key to save the setting 5 Press MENU LOCK or PTT EXIT to normal operation SHIFT Repeater Shifts Depending on the part of the band in which you are operating the repeater shift may be either 23 downward or upward One of these icons will appear at the top of the LCD when repeater shifts have been enabled 1 Press MENU LOCK rotate the DIAL knob come to MENU
10. K turn clockwise counterclockwis e DIAL come to MENU 02 TX CODE Press MENU LOCK turn clockwise or counterclockwise DIAL come to MENU 03 SQL Press MENU LOCK turn clockwise counterclockwise DIAL come to MENU 04 LIGHT 11 r p 10 4 Ea Ls lt lt D ES mt Press MENU LOCK turn clockwis e counterclockwise DIAL come to MENU 05 BEEP Press MENU LOCK turn clockwis e counterclockwise DIAL come to MENU 06 VOX Press MENU LOCK turn clockwis e counterclockwise DIAL come to MENU 07 POWER Press MENU LOCK turn clockwis e counterclockwise DIAL come to MENU 08 DW 12 or or or or Press MENU LOCK turn clockwis e or am counterclockwise PF DIAL come to MENU 09 STEP Press MENU LOCK turn clockwise or counterclockwise DIAL come to MENU 10 OFFSET LILLLILILI Press MENU LOCK 1 turn clockwis e or don ey counterclockwise rna 4 DIAL to MENU 11 SHIFT Lt Press MENU LOCK turn clockwise or counterclockwise DIAL come to MENU 12 STE 13 Press MENU LOCK turn clockwise B ow a counterclockwise DIAL come to MENU 13 W N DOU FE LUA Press MENU LOCK turn clockwise or w am E we Tera fes counterclockwise A DIAL come to MEN
11. ON L R button on side for 2 seconds 1 Press and hold the button L R come to the FM Radio Mode 2 Rotate the DIAL knob to adjust the frequency The FM broadcast coverage is 87 0MHz to 108 0MHz Frequency step as 100 2 3 Then press and hold the L R button EXIT the FM Radio Mode 4 Press and hold the U V to switch the FM radio frequency mode and the FM radio save channel mode Saving broadcast frequencies In broadcast VFO Mode 1 U V for 3 seconds 2 Select a memory 3 U V again until the Beep 29 1 Under the FM radio frequency mode set the frequency you want to save 2 Press the F ALERT button and then press the button 01 15 flashes on the LCD display rotate the DIAL knob to save it 3 Press the U V button to confirm saving In the FM radio mode the communication between the transceivers is priority That means in the FM radio mode when the signal come the transceiver will automatically exit the FM radio mode FM RADIO SCANNING In the FM Radio mode press F ALERT button then press MENU LOCK key to scan the complete band Clockwise or counterclockwise rotation of DIAL knob to scan the band from low to high or from high to low When searches the certain channel the scanning will stop at the channel Rotate the DIAL knob continuously to scan from low to high or from high to low Press any key to exit the scanning TROUBLESHOOTING GUIDE PROBLEMS
12. SOLUTIONS No Power Check battery installation and or replace batteries ST eco The battery life is over replace new one Can t Communicate i with Other Group Verify that the frequency and the CTCSS you are using are the same Members as those of your group members Hear the Voice Change your CTCSS for the channel You also need the CTCSS from Other Groups for all the radios in your group 30 General Frequency Channels Channel spacing DC input voltage Standard Battery Operating temperature Dimensions Weight Current Drain Stand By Receiver Sensitivity 12dB Sinad Audio output Transmitter RF output power Modulation Spurious amp Harmonics Maximum deviation Current Drain FM Radio Frequency range SPECIFICATIONS VHF 144 146 MHz 136 174 MHz UHF 430 440 MHz 400 470 MHz 99 5 6 25 10 12 5 25 KHz 3 7 VDC 1500mAh 20 60 mm 47 x 81 x 23 main body 130 gr lt 75mA 0 2 uV 500mW 2W F3E in compliance with the R amp TTE regulations lt 5KHz lt 2 5KHz lt 1 4 87 5 108 MHz WFM KT 950EX INTERN VERSION 136 174 MHz 400 470 MHz not available for Europe 31 General Information Important notice The use of VHF and UHF FM transceivers is subject to the regulations applied in the country where the product has to be used As regulations are usually subject to possible modifications please check the current regulations
13. Switch LAMP FM Switch ON OFF Key Microphone U V MODE Key PULL KNOB UP TO UNLOCK II NJ EE DIAL Knob TX Indicator SP MIC EXT DC Jack VOL MON Key MENU LOCK Key Speaker THE DEFINITION OF THE CONTROL DIAL Knob The main tuning Dial is used for setting the operating frequency and is used for audio volume level menu selections and other adjustments To rotate this Dial knob pull the knob to unlock the mechanical dial lock and then rotate the Dial knob PTT Switch Press this switch to transmit and release it to receive after your transmission is completed VOL MON Key Press and Hold the key to disable the noise squelching action you to hear very weak signals near the background noise evel Just press the key then rotate the DIAL knob to adjust the audio ON OFF Press and hold this key for two seconds to toggle the transceiver s power on and off F ALERT Just press to activate the Alternate key function such as setting Scanning Memory Write Mode etc Press and hold the switch to activate the Alarm function MENU LOCK Just press the key entering into the MENU Rotate the DIAL knob will see different functions setting under the MENU Press and Hold the key activate the Key Lock or disable the Key Lock Note After the is locked the operations of the F ALERT UV MODE
14. U 14 SAVE Press MENU LOCK turn clockwise or am counterclockwise EN DIAL come to MENU 15 TOT Press MENU LOCK 1 turn clockwise or counterclockwise DIAL come to MENU 16 SCANM 14 Press MENU LOCK turn clockwise or counterclockwise DIAL come to MENU 17 RELAYM Press MENU LOCK turn clockwise or counterclockwise DIAL come to MENU 18 BCLO Press MENU LOCK turn clockwise or counterclockwise DIAL come to MENU 19 PRI Press the key UV MODE confirm the setting and EXIT the functions setting Battery Save Time out Limit Width Narrow only be changed via program software Under the VFO mode turn clockwise or counterclockwise DIAL to increase or decrease the frequency 15 OPERATION POWER ON OFF 1 Be sure the Battery Pack is installed and the battery is fully charged Connect the antenna to the top panel ANTENNA jack 2 Press and hold the key ON OFF currert DC supply voltage will appear on the LCD for 2 seconds and beeps will be heard the display will resume its normal indication of the operating frequency 3 To turn the transceiver off press and hold the ON OFF again for one second ADJUSTING THE VOLUME LEVEL Pull the DIAL knob tounlock the mechanical dial lock then rotate the DIAL knob after press the VOL MON to set the desired audio level Clockwise rotation increased
15. in your country with your dealer or local supplier INTEK does not take any responsibility for illegal use and operation of this product not in accordance with the regulation of the country where the product is used User Information in accordance with art 13 of the Legislative Decree of 25th July 2005 no 15 Implementation of Directives 2002 95 EC 2002 96 EC and 2003 108 EC relative to reduction of the use of hazardous substances in electrical and electronic equipment in addition to waste disposal The crossed bin symbol shown on the equipment indicates that at the end of its working life the product must be collected separately from other waste The user must therefore take the above equipment to the appropriate differentiated collection centres for electronic and electro technical waste or return it to the dealer when purchasing a new appliance of GSS equivalent type in a ratio of one to one Appropriate differentiated waste collection for subsequent recycling treatment and environment friendly disposal of the discarded equipment helps to prevent possible negative environmental and health effects and encourages recycling of the component materials of the equipment Illegal disposal of the product by the user will be punished by application of the administrative fines provided for by the legislative decree no 22 1997 article 50 and following of the legislative decree no 22 1997 32 33 INTEK
16. ions Grade1 3 the Least Sensitive VOX Gain Level Set under too much noise conditions When VOX function is activated the LCD will display the ICON POWER HIGH LOW RF OUTPUT POWER SELECTION Select the High Low RF Output Power please set according to the following instructions 1 Press MENU LOCK rotate the DIAL knob come to MENU 7 POWER 2 Then press U V key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to set HIGH LOW 4 Press U V key to save the setting 5 Press MENU LOCK or EXIT to normal operation When set the LOW output power the LCD will display the ICON LOW and not display the ICON HIGH when set the HIGH output power 21 DW DUAL WATCH FEATURE The transceiver s Scanning features include a two channel scanning capability which allows you to operate between UHF channel and VHF channel in the VFO mode while periodically checking a user defined channel for activity If one channel is received the signal the scanner will pause on that channel Please activate the DW feature according to the following instructions 1 Press MENU LOCK rotate the DIAL knob come to MENU 8 DW 2 Then press U V key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to set OFF disables the Dual Watch feature ON activates the Dual Watch feature 4 Press U V key to save the setting 5 Press MENU LOC
17. material If any items are missing or have been damaged during shipment please contact the dealers immediately Standard Accessories ITEM QUANTITY B Dual Band Antenna 1 Li lon Battery Hand Strap Belt Clip 12 24VDC Car Adaptor Desk Charger USB Charging Cable User Manual k EIE a Antenna Li ion Hand Strap CarAdaptor Desk Charger USB Charging Cable Battery Belt Clip ad Optional Accessories EM 950 External Earset Microphone with tie clip CDKT 0950 USB Programming Kit PC interface cable and software CD INSTALLATION OF ACCESSORIES ANTENNA INSTALLATION The supplied antenna provides good results over the entire frequency range of the transceiver However for enhanced based station medium wave and shortwave reception you may wish to connect an external antenna as the supplied antenna is very small and can not be expected to provide high performance at these frequencies To install the supplied antenna hold the bottom end of the antenna and screw it onto the mating connector on the transceive until it is snug Do not over tighten by use of extreme force See PIC 1 A PIC 1 WW 2 Note Never transmit without having an antenna connected When installing the supplied antenna never hold the upper part of antenna while screwing it onto the mating connector on the transceiver If using an external antenna for transmission ensu
18. ng 5 Press MENU LOCK or PTT EXIT to normal operation BEEP KEYPAD BEEPER ON OFF If the Keypad Beeper will inconvenience you especially being operated in the silent room you may disable the Beeper according to the following instructions 19 1 Press MENU LOCK rotate the DIAL knob come to MENU 5 BEEP 2 Then press U V key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to set ON OFF 4 Press U V key to save the setting 5 Press MENU LOCK orPTT EXIT to normal operation ON The beeper being activated LCD displays icon OFF The beeper being disabled VOX VOICE OPERATED TRANSMISSION VOX eliminate s the necessity of manually switchin g to the transmissim Mode each time you want to transmit The transceive automaticall y switches to transmission mode when the VOX circuitr y senses that you have begun speaking into the microphone Please set according to the following instructions 1 Press MENU LOCK rotate the DIAL knob come to MENU 6 VOX 2 Then press U V key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to set OFF 1 2 3 4 5 6 7 8 9 4 Press U V key to save the setting 20 5 Press MENU LOCK or PTT EXIT to normal operation NOTE Grade 7 9 the Most Sensitive VOX Gain Level Set under silent conditions Grade 4 6 the Medium Sensitiv e VOX Gain Level Set under common condit
19. ot place the transceiver on the unstable surface Keep the transceiver out of dust moisture water Do not operate the transceiver or charge the battery pack under explosive conditions SAFETY It is important that the operator is aware of and understands hazards common to the operation of any transceiver waRNING Please turn the transceiver off at the following locations P In explosive atmospheres inflammable gas dust particles metallic powders grain powders etc p While taking on fuel or while parking at gasoline service stations P Near explosives or blasting sites P In medical institutes or aircrafts changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment CONTENTS UNPACKING AND CHECKING EQUIPMENTS 01 INSTALLATION OF ACCESSORIES 02 BATTERY CHARGING 04 GETTING ACQUAINTED M 06 OPERATION 16 ADVANCED OPERATION 16 ADDITIONAL FUNCTIONS AND SETTINGS 29 TROUBLESHOOTING GUIDE 30 SPECIFICATIONS esee 81 GENERAL INFORMATION 32 UNPACKING AND CHECKING EQUIPMENTS Carefully unpack the transceiver We recommend that you identify the items listed in the following table before discarding the packing
20. ow 1 Press MENU LOCK rotate the DIAL knob come to MENU 16 SCANM 2 Then press U V key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to select the SCANM TO CO 4 Press U V key to save the setting 5 Press MENU LOCK or PTT EXIT to normal operation ELAYM Repeater Sound Response Radio comes with the Repeater Sound Response feature When the feature is activated the handheld transceiver will hear the sound from the repeater that means the handheld transceiver is working via the repeater Please see below to activate the features 1 Press MENU LOCK rotate the DIAL knob come to MENU 17 RELAYM 2 Then press U V key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to select the RELAYM ON OFF 4 Press U V key to save the setting 5 Press MENU LOCK or PTT EXIT to normal operation 27 BCLO Busy Channel Lock out The BCLO feature prevents the radio s transmitter from being activated if a signal strong enough to break through the noise squelch is present On a frequency where stations using different CTCSS or DCS codes may be active BCLO prevents you from disruptin g their communications accidentally because your radio may be muted by its own Tone Decoder The default setting for the BCLO is OFF The below instruction is the procedure to activate the BCLO 1 Press MENU LOCK rotate the
21. re generally is no reason to use the high power output in order to achieve full quieting access to the repeater With the transmit battery saver the automatic selection of Low Power operation conserves battery drain significantly To activate the Transmit Battery Saver 1 Press MENU LOCK rotate the DIAL knob come to MENU 14 SAVE 2 Then press U V key to enter the set mode 25 3 Clockwise or counterclockwise rotation of DIAL knob to select the SAVE ON OFF 4 Press U V key to save the setting 5 Press MENU LOCK or PTT EXIT to normal operation TOT Time out Timer The TOT Feature provides a safety switch which limits transmission time to preprogrammed value This will conserve battery power by limiting the length of transmissions The TOT default is 180s To adjust the timer see the instructions below 1 Press MENU LOCK rotate the DIAL knob come to MENU 15 TOT 2 Then press U V key to enter the set mode 3 Clockwise or counterclockwise rotation of DIAL knob to select the TOT OFF 30S 60S 90S 120S 150S 180S 4 Press U V key to save the setting 5 Press MENU LOCK or PTT EXIT to normal operation SCANM Scan Mode Radio allows you to scan the memory channels entire operating band or a portion of that band It will halt on signals encountered so you can talk to the station on that frequency if you like 26 To select the scanning mode please see bel
22. re that the SWR presented to the transceiver is 1 5 1 or lower to avoid excessive feed line loss N J f BELT CLIP INSTALLATION If necessary install the belt clip into the location on the back 1 of the battery See PIC 2 PIC 2 Note Do not use the glue to fasten the screw while installing the belt clip Otherwise the acrylic acid of the glue may damage the battery panel EXTERNAL EAR MIC INSTALLATION Insert the optional earset microphone plugs into the SP amp MIC Jacks of the transceiver See PIC 3 SNNT PIC 3 NY BATTERY PACK INSTALLATION The battery pack is a high performance Li ion battery providing high capacity in a very compact package Under normal use the battery may be used for approximately 400 charge cycles after which operating time may be expected to decrease If you have an older battery that is displaying diminished capacity you should replace the battery with a new one Installation of the battery is easy and quick 1 Slide the Battery Cover to the Unlock position and then slide the Battery Cover toward the bottom to remove it 2 Install the battery into the Battery Compartment 3 Replace the Battery Cover and then slide the Battery Cover Latch into the Lock position 8 B UNLOCK BATTERY CHARGING If the battery has never been used or its charge is depleted it may be charged by connecting
23. sHHHEP Audio Volume Level COMBINATION KEY FUNCTION 1750Hz Tone Calling PTT VOL MONI for 1 second Press and hold the button PTT and VOL MONI to enter the Tone Calling Mode 1750Hz The transceiver send out the signal 1750Hz Release the button VOL MONI to exit Restore to Default Factory Setting ON OFF VOL MON for 5 seconds Press and hold the key ON OFF VOL MON then Power ON the transceiver will restore to the default factory setting Factory Default Setting as 454 000MHz No CTCSS DCS Low Output power Battery Save Volume Level 5 SQ 5 Key Tone ON other settings OFF MENU DESCRIPTION Menu Item Description Settings 1 RXCODE OFF CTCSS DCS 2 TXCODE OFF CTCSS DCS 3 SQL Squelch 0 9 4 LIGHT LCD Illumination OFF ON Key 5 BEEP Keypad Beeper OFF ON 6 VOX OFF 1 9 7 POWER RF Output Power HIGH LOW 8 DW Dual Watch UHF amp VHF ON OFF 9 STEP 5 6 25 10 12 5 20 25 KHz 10 OFFSET 0 37 995 0 69 995MHz 11 SHIFT 0 12 STE Tail Tone Elimination ON OFF 13 W N Wide Band Narrow Band WIDE NARROW 14 SAVE Battery Saver ON OFF 15 TOT Time out Timer OFF 30 60 90 120 150 180S 16 SCANM Scan Mode TO CO I7 RELAYM Repeater Sound Response ON OFF 18 BCLO Busy Channel Lock out ON OFF 19 PRI Priority Channel Scanning ON OFF 10 MENU SETTING Press MENU LOCK come to MENU 01 RXCODE Press MENU LOC
24. urage you to read this manual thoroughly and learn about many exciting features SAFETY TRAINING INFORMATION Your KT 950EE radio generates RF electromagnetic energy during transmit mode This radio is designed for and classified as Occupational Use Only meaning it must be used only during the course of employment by individuals warining aware of the hazards and the ways to minimize such hazards This radio is NOT intended for use by the General Population in an uncontrolled environment Electromagnetic Interfe rence Compatibility During transmissions your radio generates RF energy that can possibly cause interference with other devices or systems To avoid such interference turn off the radio in areas where signs are posted to do so DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals aircraft and blasting sites Occupational Controlled Use The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure NOTICE It is recommended to carefully read this owner s manual before using the product This will also help the user to prevent using the radio in violation of the regulations valid in the country where the product is used as well as to avoid any possible interferences with other services NOTICE This
Download Pdf Manuals
Related Search