User manual Salvus laptop safe
Contents
1. ERROR is shown on the display when inputting your code 4 OPENING THE SAFE a Press the displays shows ENT CODE b Input your code and press c If the code is correct you will hear a confirmation sound the display shows OPEN and the door will open Warning a If the code is wrong you will hear three short beeps and the display shows ERROR b If an intruder enters wrong codes 4 times consecutively the buzzer will sound for 1 minute 5 CLOSING THE SAFE a Close the safe door Press followed by c The bolts will lock the door and the display shows CLOSE o 6 BUZZER CONTROL Keep pressed and then press 2 to control the buzzer sound When the display shows BUZZER it means the buzzer will work when display shows SILENT it means the buzzer is silent unless 4 wrong codes are entered consecutively 7 CODE DISPLAY CONTROL Keep pressed and then press 1 to control the code display When display shows dP it means the entered digits will not be displayed when display shows dP COdE means the entered digits will be displayed 8 OVERRIDE INSTRUCTION TO OPEN THE SAFE This safe has a manual override system operated by the keys supplied a Move the plate Z in anti clockwise direction b Insert the key into the lock and turn it clockwise to open the door Notice For security reasons the key can not be removed and the elec2. User manual Salvus laptop safe Thank you for choosing our safe Before operating your new safe please read the user manual to ensure maximum performance 1 OPENING THE SAFE FOR THE FIRST TIME a Move the plate Z see diagram 1 in anti clockwise direction b Insert the key into the lock and turn it clockwise to open the door Diagram 1 2 INSTALLING THE BATTERIES The safe requires 4X size AA 1 5V batteries Remove the battery cover Y see diagram 2 and install the batteries into the compartment Ensuring the batteries are fitted with the correct corresponding polarity Use of alkaline batteries is recommended 3 PROGRAMMING THE CODE a The code may only be programmed when the safe is unlocked if necessary use the override key to open the safe b Keep pressed and then press 3 the display shows SET CODE cC Enter your code combination between 3 8 digits then press You will now be asked to repeat the code you just entered the display shows REPEAT Re enter your code and press d Asound and the display GOOD to confirm that you have successfully programmed a new code If you hear three short beeps and the display shows ERROR repeat step b and c Notice Test your code with open door according as in step 4 If it works you can close the door Important Before testing your code you need to take off the key by turning it anti clockwise Otherwise
3. tronic lock is deactivated when the safe is opened using the mechanical override key To remove the key you must lock the safe using the key 9 RE ACTIVATING THE INTERIOR LIGHT To re activate the light press the display shows LIGHT ON and the light X see diagram 2 will be turned on for another 30 seconds The light is automatically activated when the safe door is opened with the electronic keypad The light can be horizontally and secure to a solid re activated at any time concrete floor or wall For your convenience there are fixing holes both in the bottom and on the back 10 BATTERY REPLACEMENT WARNING j please fix the safe correctly according to To test the batteries pPress x if the elegant batteries are low the display will show Diagram 3 Lo BAT you should replace the batteries 11 REPLACING THE BATTERIES The safe requires 4X size AA 1 5V LR6 batteries To replace the batteries open the safe remove the battery cover and replace the old batteries see diagram 2 Diagram 2 X Y 12 INSTALLING THE SAFE To reduce the risk of theft it is essential that your safe is securely fixed Please use the provided bolts to fix the safe
Download Pdf Manuals
Related Search