Home
user manual & warranty
Contents
1. pads can be removed see fig 17 and must be washed by hand Please note the following maximum temperature 30 C 85 F do not bleach do not tumble dry do not iron do not dry clean CHECK OTHER PARTS From time to time check xari for loose screws worn parts torn material and loose stitching Contact your retailer if parts need to be replaced or repair the parts as needed www mimakids com All right reserved Mima Europe S L 2010
2. the wheels This is unsafe and may damage the stroller Check that the carrycot and or seat are installed correctly and securely locked in place before usage Always apply the brake when standing still even for only a few moments Apply brake when loading or unloading children Make sure children are clear of any moving parts before making adjustments or folding unfolding stroller Ensure that fingers are kept away from the folding mechanism when folding the stroller Do not use the stroller if any parts are damaged or missing It may be unsafe to use replacement parts that or not supplied by mima GETTING STARTED FIRST SETUP 1 Unfold chassis Pull up the handlebar while holding down the tip of the chassis with your foot Continue to pull the handlebar towards you until the chassis completely unfolds and stands by itself WHEELS e Please note the L R indication on the chassis and on each wheel 2 Attach rear wheels Press in the wheel axle hub and insert the axle into the wheel fitting Check if the wheels are properly attached by attempting to pull them out again 3 Remove rear wheels Press in the wheel axle hub and pull out the wheel 4 Attach front wheels Insert the wheel rod into the wheel fitting and push in until it clicks 5 Front wheel swivel lock Use the front wheel swivel lock when you are using xari on rough terrain Push down the swivel lock button to activate Pull it up again to
3. ch the canopy first 33 Attach rain cover to seat or carrycot Fully open the canopy Position the rain cover over the canopy so the rotation lever goes through the hole in the raincover Stretch the rain cover over the seat or carrycot and fix the velcro straps around the seat brackets OTHER ACCESSORIES We develop new accessories for xari frequently For more details please check www mimakids com or with your supplier The following accessories are already available and can be purchased separately e Footmuff e Mosquitonet e Adapter kit Maxi Cosi Cabrio Cybex Aton B b Confort Pebble CARE AND MAINTENANCE e To keep xari in perfect condition please go through the following steps regularly e Fabrics and plastics conform to the highest grade of colourfastness But excessive exposure to the sun can cause premature fading of plastics and fabrics CHASSIS CLEANING Wash off sand and salt after visiting the beach Brush off excessive dirt Then wipe clean with a moist cloth and a mild cleaning agent LUBRICATING MOVING PARTS Periodicly lubricate the wheels hinges and other sliding parts using a light oil or silicon spray Do not use heavy oil as this will attract dust and grit which tend to clog and damage moving parts SEAT CLEANING The rigid seat can be wiped clean with a moist cloth and a mild cleaning agent More resistent marks can be rubbed away using a pencil eraser The seat cushion and shoulder
4. deactivate 6 Remove front wheels Slide the unlock button sideways and pull out the front wheel HANDLEBAR HEIGHT 7 Adjust handlebar height Press and hold both buttons located on the outside of the handlebar and rotate the handlebar into the desired position FOLDING AND UNFOLDING e WARNING child should not be near to the stroller when folding or unfolding e Ensure the brake is on while folding and unfolding the chassis 8 Unfold chassis Pull the handlebar upwards and continue to pull it towards yourself until the chassis completely unfolds and stands by itself Rotate the handlebar into the desired position 9 Fold chassis with seat attached e Kari can be folded with the seat attached i e in its upright position and forward facing e xari cannot be folded with the carrycot attached Rotate the handlebar into position 4 see fig 7 Push down the safety button and pull the two folding locks upwards then lower the handlebar Grab the chassis at the two hinge parts and pull it upwards so the front fork folds down Let the chassis stand and rest onto the front wheels To transport the chassis grab the carrying handle PARKING BRAKE e WARNING Always use the brake even when standing still for only a few moments 10 Apply and release parking brake Press down the brake pedal to park Press it down again to release PHASE 1 BABY CARRYCOT e When using xari for children under the age o
5. e MIMQ XI EI user manual amp warranty manual de usuario y garant a manual do usu rio e garantia handleiding amp garantie Gebrauchsanleitung und Gew hrleistung mode d emploi et garantie Dear parents grandparents and friends Thank you for choosing xari and making it part of your family We have designed and developed our products carefully keeping in mind the comfort and safety for you and your child We hope you will enjoy using xari Please read these instructions with care before using it for the first time This will enable you to appreciate all features and will ensure a safe usage mima CONTENTS WHAT YOU GET PAY ATTENTION GETTING STARTED FIRST SETUP WHEELS HANDLEBAR HEIGHT FOLDING AND UNFOLDING PARKING BRAKE PHASE 1 BABY CARRYCOT PHASE 2 TODDLER SAFETY HARNESS SEAT ACCESSORIES SAFETY BAR CANOPY APRON RAIN COVER CARE AND MAINTENANCE WARRANTY WHAT YOU GET You have received two boxes Please check if all parts listed below are in there If anything is missing please contact your supplier Hardware box Softgoods starter box 1 chassis with 2 baskets attached 1 seat pad with safety harness 1 seat with carrycot inside 1 carrycot apron 1 canopy 1 carrycot mattress 2 front wheels 2 rear wheels 1 rain cover canopy apron carrycot seat handlebar carrying handle height adjuster folding lock parking brake seat release bu
6. f 6 months we recommend using the supplied carrycot until the child can sit unaided 11 Set up carrycot Zip open the seat and take out the carrycot Push the two flaps underneath the carrycot tube Place the mattress inside the carrycot and attach the safety bar see fig 25 12 Adjust carrycot angle It is easier to fit the carrycot onto the chassis if the attachment brackets are in position Ill pointing straight downwards To achieve this pull the angle adjustment lever and rotate the brackets The carrycot angle can also be adjusted when fitted to the chassis 13 Attach carrycot Position the carrycot so that the angle adjustment lever is at the front end of the stroller Lower the carrycot onto the chassis until it clicks in place 14 Remove carrycot Press the two buttons on both sides of the carrycot and lift it up 15 Adjust height of carrycot e There are two height positions for the carrycot Press the height adjustment buttons on both sides of the chassis and move the carrycot up or down 16 Collapse carrycot Remove the mattress and the safety bar Release the sideflaps from the carrycot frame Open the seat and position the collapsed carrycot inside the seat Align the angle adjustment lever with the hole in the rear shell of the seat Make sure the seat brackets stay out of the seat PHASE 2 TODDLER SAFETY HARNESS e Whenever a child is placed in the seat ensure that the safety harness i
7. s correctly fitted e The shoulder straps can be set at two different height positions Choose the position closest to the top of the child s shoulders 17 Set up harness Take each harness attachment and slide off the bottom part Push the harness attachment through its corresponding hole in the seatpad and the seat Zip open the seat and slide the bottom part onto the harness attachment from the inside of the seat until it clicks in place 18 Buckle up Push the shoulder strap buckles into the buckle slot until it clicks Pull the loose ends on the shoulder straps to fit the harness snugly around the child 19 Buckle down Push the central buckle button to release the harness SEAT e The seat is suitable for children from the age of 6 months and up to 17 kg e The seat can be attached either forward facing or backward facing 20 Attach seat Lower the seat onto the chassis until it clicks in place 21 Remove seat Press the two seat release buttons on both sides of the seat and lift it up 22 Adjust seat angle Pull up the lever on the top of the seat and rotate the seat into the desired angle 23 Adjust height of seat e There are two height positions for the seat Press the height adjustment buttons on both sides of the chassis and move the seat up or down 28 29 30 ACCESSORIES SAFETY BAR e Always use the safety bar for the safety of your child 24 Remove safety bar covers Push in the but
8. tons and slide the covers off Keep the covers in a safe place for future use 25 Attach safety bar While pressing the two buttons on the outside of the bumper bar push it down onto the seat frame until it clicks Check if the bumper bar is properly attached by attempting to pull it out again 26 Remove safety bar Press the buttons on the outside of the bumper bar and pull it up 27 Adjust safety bar angle While pressing the two buttons on the inner side of the safety bar rotate it to the desired angle CANOPY e The canopy can be fixed to both the seat as well as the carrycot e When the canopy becomes wet keep it open and let it dry before closing it 28 Attach canopy to seat or carrycot Push the canopy clips onto the seat frame until they click in place Fix the velcro flap to the seat 29 Open close canopy Pull the canopy flaps to open Push down the canopy flaps to close 30 Remove canopy Release the velcro flap at the top of the canopy Pull the canopy clips outwards and pull them up to remove them from the seat frame APRON 31 Attach apron to carrycot Place the apron over the carrycot frame Click the snap buttons on both sides of the apron onto the studs of the carrycot frame 32 Adjust apron The upper apron flap can be placed into two different positions which are magnetized RAIN COVER e The rain cover can be fixed to both the seat as well as the carrycot e Make sure you atta
9. tton seat height adjuster basket ENG PAY ATTENTION IMPORTANT Read these instructions carefully before use and keep them for future reference Your child s safety may be affected if you do not follow these instructions e This stroller is intended for children from birth and up to 17 kg When used for children under the age of 6 months we recommend to use the supplied carrycot until the child can sit unaided e This stroller can be used for transporting a maximum of one child at a time The recommended maximum load is 17 kg e The maximum permitted weight in each of the two baskets is 3 kg WARNINGS e A child s safety is your responsibility e It may be dangerous to leave your child unattended e Ensure that all the locking devices are engaged before use e Do not add a mattress thicker than 20 mm Do not add an additional mattress in the carrycot only use the one provided by mima e As soon as your child can sit in the seat unaided make sure to always use the safety harness Ensure the harness is fitted correctly to prevent the risk of your child sliding or falling out e The seat is not suitable for children under 6 months e Any load attached to the handle affects the stability of xari and increases the risk of it tipping over accidentally Always use the crotch strap in combination with the waist belt This product is not suitable for running or skating Do not stand on the crossbars between
Download Pdf Manuals
Related Search
Related Contents
Sanyo Projector PLV-70 User's Manual Clarion VRX935VD Automobile Parts User Manual Samsung SGH-E630 Instrukcja obsługi Handleiding Inforad Moto manual SSR Des flips et des tresses Copyright © All rights reserved.
Failed to retrieve file