WSM 02 – WSM 03 MKIII 1200W – 1500W DMX fog machine User
Contents
1. Always disconnect the device when it is not in use for a longer period or time when servicing is needed or when the device needs cleaning Only handle the power cord by its connectors Never pull the cable to remove a connector from its socket as this could lead to damage and electrical shocks Always operate this device with a stable AC current Always operate this device with the AC ground wire connected to the electrical system s ground Never use other types of cables than specified in the manual do not use defective or bad functioning cables Contact your dealer when the included or required cables do not work properly with this device When the device has been exposed to large temperature differences for example transport from outdoor to indoor do not connect the device immediately Do not activate the unit until it has reached room temperature as moist might build up inside the unit which may cause shortcuts and or electrical shocks Guidelines and types of use This device is intended to be used by professionals on stage in theaters clubs and other equal venues This device is not suitable for children and always needs to be operated by an adult Only use the device when the environment is suitable and will not cause any damage Do not use the product in moist or dusty environments or where long term damage may occur such as indoor swimming pools where chlorine is used Beaches where sand and salt are pres2. WSM 02 WSM 03 MKIII 1200W 1500W DMX fog machine User manual All information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 11 02 2014 RV Revision date author initials 16 06 2014 RV Safety instructions A WARNING A Always keep this device away from moisture and rain Hazardous electrical shocks may occur A WARNING A Only connect this device to a matching power outlet This device is intended to work on a specified AC currency Connecting this device to power outlets with other voltages may result in permanent damage and possible hazardous situations such as fire or electrical shocks A WARNING A Be careful with every operation of this device Touching live wires inside and outside the unit may cause hazardous electrical shocks This unit must be operated by or under the supervision of an adult This device is not suitable for children Every person involved with the installation operation and maintenance of this device has to Be qualified Follow the instructions of this manual Make sure there is no damage caused by transport If the device seems damaged from the outside do not use it and contact your dealer for more information and consultation To make sure the device maintains in perfect condition and for safe operation it is necessary for the user to follow the instructions and warning notes
3. Pume eses s ssSSS 40DCB 55DCB Output distance 10 14m Warm up time Ronioximaiely 6 Approximately 7 minutes minutes rReady indiator inside tank XK Wireless keychain remote included XX Wired timer remote included XX Hanging bracket included X l X Safetyeye XK Connectors DMX 3p XLR male and female Power IEC power connector Wired timer remote 5 pin DIN Included accessories Power cable with Shucko amp IEC connectors Mounting bracket with hardware Wired timer remote Wireless keychain remote Connectors and wiring schematics DMX connections Electrical wiring DMX output DMX input ALK mounting socket XLR mounting plug Cable International Brown Sigal i signal Yellow Green 1 Ground 2 Signal 3 Signal Laer total All information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 11 02 2014 RV Revision date author initials 16 06 2014 RV
4. an expandable antenna to improve the range and signal transmission To replace the internal battery remove the screws on the rear DMX control When you are already in the possession of a DMxX controller it is possible to integrate the WSM fog machine in your light show The output of the fog machine can be adjusted with one DMX channel from 0 to 100 For optimal use of the fog machine on DMX some basic knowledge is needed Contact your local dealer for more information Connect the fog machine to your DMX controller using standard XLR male to XLR female cables Select the correct DMX starting address by using the dipswitch panel All information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 11 02 2014 RV Revision date author initials 16 06 2014 RV The dipswitch value is shown for each dipswitch By adding several values you are able to make combinations to reach the desired DMX value between 1 and 512 For example if you wish to set the device to channel 17 you need to select dipswitch 1 5 A status LED is provided indicating that the machine receives DMxX signal from your controller Turning on the machine Turn on the ON OFF switch on the rear of the machine When doing so you will not have instant smoke as the internal heating element needs to reach a certain temperature The machine has a built in indication LED which pro
5. of this user manual Damage caused by improper use or modifications to the device are not covered by warranty This device does not have any user serviceable parts inside Servicing of this device needs to be done by qualified technicians Important notes regarding safety and health Never let the power cord come in contact with other cables Handle the power cord and all connectors with the mains with caution Never remove any warning or informative labels from the unit The ground contact always needs to be connected Do not cover or remove the ground contact Never leave cables lying around Do not open the device and do not modify any hard or software of this unit Do not insert this object into air vents Do not connect this device to a dimmerpack Do not switch the system on and off frequently as this will reduce the lifespan of the device Do not drive the inputs of the fixture with a signal larger than required to work at full performance Only use this device indoor avoid contact with water moist or other liquids Do not place items filled with liquids on top of the unit All information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 11 02 2014 RV Revision date author initials 16 06 2014 RV Avoid nearby flames or heat sources do not place this device near flammable liquids gas or flammable items
6. ause of the high temperature of the fog at short distance Control The WSM fog machines are controllable in several ways You are able to use the included wired remote the included wireless keychain remote or you can control the device with a DMX controller not included Wired remote Connect this controller with the 5 pin DIN connector on the rear of the machine 1 Interval selection Determines the timespan when the machine is activated 2 Duration selection Determines the duration if the timer activates the machine 3 Output intensity Output 0 100 variable 4 Timer functionality on off 5 Continuous fog Continuous operation with the selected output intensity 6 Manual fog Fog projection at the selected output intensity when pressed Yellow LED Timer function on off Red LED Continuous fog function on off Green LED Fog machine ready indicator Wireless keychain remote The wireless keychain remote is compact and gives you flexibility It operates under a range of max 25 meters if not obstructed by objects or walls To use the wireless keychain remote connect the receiver to your fog machine using the correct connector The keychain has a protective cover making it impossible to press buttons while you aren t using the remote The cover slides down easily granting access to the LED and buttons When pressing a button the LED will be lit indicating that a signal is being sent to the receiver The keychain remote has
7. e is used for protection against electrical shocks and short circuit Always mount the fuse cover back to the fuse compartment All information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 11 02 2014 RV Revision date author initials 16 06 2014 RV Guidelines for fog machines Fluid guidelines Only use water based fog liquids Ayra recommends the use of Ayra fog machine fluid only Other types of fog liquid may cause permanent damage or bad performance When the wrong type of fog liquid is used the machine might spray hot liquid Itis possible to keep fog machine fluid in the tank during transport Pay close attention to possible tipping When transporting this device with fluid still in the tank the maximum level should not exceed 50 When transporting this device with parcel delivery companies or any other way of transport where the device could be positioned upside down the fluid tank needs to be fully drained Temperature guidelines AN WARNING AN This machine has a built in heating element The housing of this device may become very hot during use Do not touch the housing of the device during use and do not place your hand in front of the fog machine output nozzle The fog machine requires a heat up time It is not directly ready for use when switched on The temperature of the heating eleme
8. emote control 1x mounting bracket Unit and accessory inspection Always check the unit box and accessories for possible damage before use If you suspect that something is wrong with the unit do not connect it to a power source When you suspect that your unit is broken or damaged contact your local dealer or a certified technician to inspect the unit If any of the parts that should be included is missing contact your local dealer for help If the box appears severely damaged soaked with liquid or ripped apart do not unpack the product and contact your local dealer for help and more information Always preserve the original box and packaging materials as long as the warranty period is active This way the device can be transported for repair and inspection safely All information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 11 02 2014 RV Revision date author initials 16 06 2014 RV Device overview y _ E TTE Sfiddaas 1 Fog machine nozzle fog output 2 Transport handle 3 Ventilation slots 4 Liquid hose and liquid tank cap 5 Wired control input 5 pin connector 6 DMX dipswitch panel with indication LED 7 On off switch 8 DMX input 9 DMX output 10 Power inlet IEC connector 11 Fluid level indicator D 12 Duration selection 13 Interval selection 14 Output intensity 15 Tim
9. ent Outdoor without roof protection Indoor areas where intense heat sources are present or where the temperature exceeds levels which are comfortable for humans Only use the included power adapter and only connect the device to a suitable power outlet with the correct output voltage Connecting the device to a power outlet with the wrong type of voltage or using the product with a wrong type of power supply may cause permanent damage to the device Avoid shocks and collision during use and transport Do not transport the device while in use Avoid brute force during the installation and operation of this device Familiarize yourself with the functions of the device before use Do not allow operation of the device by unskilled or unqualified people Use of the device in other ways than described in this user manual may cause damage and injury Ayra does not take responsibility for any damage or injury caused by improper use Storage and transport This device is intended for mobile use When transported use the original packaging of the product ora fitting flightcase preferably filled with foam This device is not intended for permanent use Operation breaks will ensure that the lifespan of the device remains unchanged If the device is not used for a longer period of time disconnect it from its power source and store it in its original packaging or in a fitting flightcase Store the device indoor dry and do not expose t
10. er functionality on off 16 Continuous fog 17 Manual fog 18 Keychain Fog 100 MIN MAX MIN MAX DURATION INTERVAL TIMER b ithout further notice User manual version 2 0 Creation date author initials 11 02 2014 Rgvision date author initials 16 06 2014 RV o l CONTINUOUS MANUAL EAG FOG Tsai a PP RY ETAS PAR A P REAA NY All information and illustrations shown in this user manual are subject to chan Setting up the unit To make sure that you use this machine as intended Ayra recommends to follow the steps described below Liquid Before turning on the machine make sure there is enough fog liquid in the tank This machine is designed and set for Ayra fog fluid Proper fog liquid leaves less residue is more efficient economical and creates almost odorless fog The use of other fog fluids may cause fluid spraying or unpleasant fog odors The liquid tank of your WSM device has a volume of approximately 1 8 liters Fill the tank for approximately 3 4 of its capacity Overfilling the tank may cause the liquid to spill during transport because of shocks impact and tilting of the machine Fluid consumption depends on the type of fluid the amount of fog that you wish to create and the time span of use Positioning The WSM01 MKII fog machines is designed for use on a stable platform It can be positioned on a floor DJ booth or bar However Ayra does not recommend placing the machine near audience bec
11. he device to extreme temperature differences Housing Inspect the housing of the device frequently Severe dents cracks and missing screws should be avoided at all costs Do not use the device when the housing is not in optimal condition Contact your dealer or a skilled technician when in doubt about the state of the device Check the fixture and screws for corrosion Corrosion should not be present on the fixture Contact your dealer or a skilled technician when corrosion is found on the fixture Every power or signal chassis connector should be mounted tightly Do not use the device when connectors are loose Do not use the power cord when the cores are visible Contact your dealer for a replacement if needed Avoid the buildup of dust and dirt Clean the exterior of the fixture every month with a dry or damp cloth When using the device intensively the cleaning frequency needs to be increased Fuses The main fuse of this device is to be found on the rear of the device In most cases directly next to the power inlet Only replace a fuse for a new one with the same type and rating Do not use a fuse with a higher or lower All information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 11 02 2014 RV Revision date author initials 16 06 2014 RV rating Do not bridge the fuse with electrical wires aluminum foil as the fus
12. jects on the liquid tank This way you can see the tank light up when the fog machine is ready indicated with a green LED Projecting fog After 50 seconds depends on the output volume the fog machine will stop its output to reheat the internal heating element A built in thermostat keeps the heating element on a proper temperature During the reheating time the fog machine can not be used to project any fog All information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 11 02 2014 RV Revision date author initials 16 06 2014 RV Maintenance and protection against damage and or injuries To be able to keep your fog machine in optimal shape please pay attention to the maintenance guidelines stated below Following these guidelines ensures that your fog machine remains in perfect condition over a longer period of time Incorrect or no maintenance may reduce the life span of your device and could cause permanent damage Before shutting the machine down If you want to shut the machine down it is recommended that you empty any remaining fluids inside the fluid distribution system Especially when the machine will not be used for a longer period of time it is recommended that you open the fluid tank remove the fluid hose from the tank and place it next to the tank in open air Subsequently emit some fog at 100 output so the fog distribu
13. nt is set in the factory Do not attempt to change the set temperature of the device The fog coming out of the fog machine is very hot and moist on short distance Keep animals small children flammable objects and electronic devices away from the fog machine output After use unplug the power cable from its socket and let the machine cool down at least 20 minutes Do not transport the machine while it is still hot Small puffs of smoke may be produced during cool down time Ventilation and health guidelines A WARNING A Large amounts of fog in a bad ventilated room may cause headaches lightheadedness dizzyness and possible other health related issues If any of these symptoms occur stop producing fog immediately and open a door or window to let fresh air into the room Always make sure that there is sufficient ventilation in the room Fresh air needs to be able to enter the room and vaporized fog needs to be able to be drained from the room Pay caution with the amount of fog used Only small amounts of fog are required to accentuate professional lighting and make the beams visible Do not proceed producing fog when the visibility drops below 2 meters The use of fog is not hazardous for people or animals if used with caution and proper ventilation Do not use more fog than needed to achieve the desired effect Exterior guidelines Do not cover the nozzle of the fog machine do not place a tube over the nozzle When
14. tion system will be cleared from any remaining fluid When you notice a strong reduction in fog emission decrease the output power if possible to approximately 25 until no fog is produced anymore After this switch the machine off Cooling down period After use let the fog machine cool down before transporting it by the handle Small bits of fog may still be emitted just after the machine is switched off Let the machine cool down for at least 20 minutes and only transport it when the housing of the machine reaches a temperature that is comfortable enough to handle Transporting the machine while it is still hot may cause injuries and permanent damage to the internal electronics and heating element Re activating the machine When using your fog machine again with an empty fog fluid distribution system turn on the device as usual Let the machine heat up so it is ready for fog production Always start with 25 output so the internal pump does not have to perform at 100 capacity without any fluid When fog clouds are produced by the machine at 25 output it is safe again to use the machine at full output Increase the output percentage gradually until the desired effect is created Scented fog fluids Ayra strongly discourages the use of scented fog fluids as these fluids usually have a sticky consistency and will be sucked into your fog machine and its internal components If you are going to use scented fog fluids always read the ins
15. tructions first and do not exceed the maximum amount of scented fluid to add to a tank or jerrycan of fluid A few drops of scented fluid are more than enough for 1 liter of fog fluid Exceeding the recommended amount of scented fluid may cause permanent damage to your fog machine and its internal components Damage and defects or decrease in performance caused by wrong use of fluids are not covered by the warranty Fog fluids Ayra strongly recommends the use of Ayra brand fog machine fluids with the WSM series machines water based fog fluids Any other fluids used with this device may not result in optimal performance and could even cause sputtering at the nozzle of the machine causing hot drips of fluid being sprayed from the nozzle output Ayra cannot be held responsible for any damage and or injuries caused by improper use of the device or when wrong types of fog machine fluids are used No other fluids other than fog machine fluids water based fluids should be used to fill the tank of the fog machine Ayra cannot be held responsible for any damage or injuries caused by the use of other liquids than recommended in this user manual All information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 11 02 2014 RV Revision date author initials 16 06 2014 RV Technical specifications S02 MK WSMO3 MK Heating element 1200 Watt 1500 Watt
16. using the fog machine in a standing or hanging angle do not adjust the vertical angle more than 15 up or down When used in a hanging position the device always needs to be secured by using a safety cable Attach the safety cable to the provided safety eye with the carabiner hook A safety cable is not included in delivery and can be purchased separately The device must be installed on a flat surface or hanging from a solid construction by using the included bracket Never hold the machine in your hands during use All information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 11 02 2014 RV Revision date author initials 16 06 2014 RV The handle provided on the device is only to be used during transport not during operation This device is not intended to be installed directly above publicly accessible areas When using the device in a hanging position always mount a G clamp or half coupler to the bracket or use bolts to install the bracket directly to a ceiling or beam All information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 11 02 2014 RV Revision date author initials 16 06 2014 RV Box contents Box contents 1x WSM fog machine WSM 02 MKIII or WSM 03 MKIII 1x power cable 1x wired controller 1x keychain wireless r
Download Pdf Manuals
Related Search