Home

User manual ELJA Battery Isolators

1. ELJA U ser manual ELJA Battery Isolators This user manual is available for the following types named in the diagram below ELJA type Maximum Battery Number R Alternator charger of contact current current chargers 702 70 A 50 2 702 4 70A 50 2 X 703 70A 50 3 1202 120 A 100 2 1202 4 120 A 100 2 X 1203 120 A 100 3 1203 4 120 A 100 3 X 1602 160 A 100 2 ELJA battery isolator without R contact Alternator Orginele Accu Tweede Accu Instructions 1 Disconnect the groundcable s from the battery before installing isolator to eliminate an accidental short that could damage the electrical system Never run the engine with loose or open connection This could burn the alternator Mount the ELJA battery isolator always on a dry place where there is enough ventilation of air Connect the positive from the first chargerset on connection 1 from the isolator Connect the positive from the second chargerset on connection 2 from the isolator If the isolator has a third batteryconnection 703 or 1203 then you can connect the third chargerset on connection 3 from the isolator Connect the B connection of the alternator on to the A connection from the isolator Application with battery chargers When the ELJA Battery Isolator is used with a battery charger the procedure is the same as with an alternator The only point of attention is that there is
2. no B from the alternator as main connection but the from the battery charger The R connection is not applicable in this case Guarantee 1 year after sale in reservation of correct placement and connection All rights reserved Jaarsveld Electra B V ELJA battery isolator with R contact Alternatori 3 Batt 1 Regelaar amp Controlelamp Batt 2 Tweede Accu Orginele Accu When the battery isolator has a R connection follow the instructions and add the points below to the instructions 10 11 12 Connect the votage regulator from the alternator with the R connection on the battery isolator Solder a wire 1 5 mm2 on to the connection point on the regulator which makes contact with the springcontact in the alternator Take care of it that the connection point on the regulator may not come in contact with the springcontact in the alternator Remount the voltage regulator on the alternator and let the new wire come out Connect the new wire mentioned in point 10 to the connection point R on the ELJA battery isolator Disconnect the wire which comes from the dashboard controllamp from the alternator D and connect this wire also on connection point R or connect this wire with the wire mentioned in point 11 February 2004

User manual ELJA Battery Isolators

Contents

Download Pdf Manuals

Related Search

Related Contents