Home

OPERATORS MANUAL - International Arcade Museum

image

Contents

1. EE ENTERTAINMENT GROUP INC ALL RIGHTS RESERVED Sais VIDEO GAME S PRODUCED UNDER LICENSE ROM MARVEL ENTERTAINMENT GROUP INC OPERATORS MANUAL WARNING This game is for use in the United States of America and Canada Sales export or operation outside of these countries may be constructed as copyright and trademark infringements and is strictly prohibited Violators are subject to severe penalties and will be prosecuted to the full extent of the law ABDCOMM COIN OP INC 3311 N Kennicott Avenue Arlington Heights Illinois 60004 00176 847 797 6192 101696 847 797 6306 PON coin op inc THANK YOU FOR PURCHASING X MEN vs STREET FIGHTER WE INVITE YOU TO USE THE FOLLOWING MAILING ADDRESS TELEPHONE OR FAX NUMBER FOR PARTS OR SERVICE INFORMATION CONCERNING THIS GAME CAPCOM COIN OP INC ATTN FIELD SERVICE VIDEO PRODUCTS 3311 KENNICOTT AVENUE ARLINGTON HEIGHTS ILLINOIS 60004 PHONE 847 797 6100 FAX 847 797 6306 THE SERIAL NUMBERS OF YOUR KIT ARE LOCATED ON THE GAME CARTRIDGES AS SHOWN BELOW PLEASE HAVE THESE SERIAL NUMBERS AVAILABLE WHEN CONTACTING US FOR SERVICE INFORMATION X MEN vs STREET FIGHTER B CARTRIDGE A CARTRIDGE SERIAL NUMBER BOTTOM OF CASE V300900 PLEASE RECORD YOUR KIT SERIAL NUMBERS HERE FULL KIT A CARTRIDGE SERIAL B CARTRIDGE SERIAL AAMA SERIAL B KIT B CARTRIDGE SERIAL 4
2. CLOSING THE TEST MENU To close the Test Menu highlight 9 EXIT and push the PLAYER 1 SHOT 1 1P SHOTI1 button TEST MENU ITEM DESCRIPTIONS INPUT Used to test all the input switches such as joysticks and buttons The 0 changes to a 1 as the button is pushed or joystick is moved Check connections and switches in case the 0 doesn t change to a 1 when depressed or moved OUTPUT Used to test the coin meter and the coin lock SOUND amp VOICE Select a code of SOUND or VOICE with the PLAYER I JOYSTICK Push the PLAYER I SHOT 1 button to hear the sound of the selected code COLOR Shows color bars of red green blue and white Adjust RGB and brightness to obtain the optimum color balance and solid black background DOT CROSS Used to test the screen size focus and distortion HATCH GAME DATA Coin m ter and playtime information will be displayed CONFIGURATION Used to change the game play settings Refer to the CONFIGURATION MENU section MEMORY CHECK _ Used to test memory appears when each block of memory passes test NG appears in case of malfunction If appears repeat the memory test and wait for the OK message Contact your distributor if NG still appears EXIT Select this item and push the PLAYER 1 SHOT 1 1P 1 button to return to game play mode 10 Proprietary and confidential information not to be disclosed or copied wit
3. NT coin op inc X MEN vs STREET FIGHTER LIMITED PRODUCT WARRANTY APPLIES TO DOMESTIC SALES ONLY CAPCOM COIN OP INC Seller warrants only to the initial purchaser of its products that the items listed below are free from defects in material and workmanship under normal use and service for the warranty periods specified A CPS II System Cartridges One 1 Year B Electronic and Mechanical Components Ninety 90 days No other part of Seller s products are warranted Warranty periods are effective from the initial date of shipment from seller to its authorized distributors Seller s sole liability shall be at its option to repair or replace products which are returned to Seller during the warranty periods specified provided A Seller is notified promptly upon discovery by buyer that stated products are defective B Such products are properly packaged and then returned prepaid to Seller s designated plant This warranty does not apply to any parts damaged during shipment or handling or due to improper installation or usage or alteration In no event shall Seller be liable for any anticipated profits loss of profits loss of use incidental or consequential damages or any other losses incurred by the customer in connection with the purchase of a CAPCOM COIN OP INC product WARRANTY DISCLAIMER EXCEPT AS SPECIFICALLY PROVIDED IN A WRITTEN CONTRACT BETWEEN SELLER AND PURCHASER THERE ARE NO OTHER WARRA
4. e COIN OP INC vs STREET FIGHTERTM E KIT INSTALLATION 1 Remove the monitor glass and throughly remove the old game stickers from the monitor card or bezel Peel off the backing to the game instruction decal and apply to the top of the monitor card bezel 2 VERIFY that the existing control panel wiring conforms to the JAMMA configuration for this game as shown in Tables 1 amp 2 on page 5 of this manual any of the lower button wires are frayed or nicked replace with new auxiliary cable included in the kit 4 To install the game cartridges follow the Game Cartridge Installation instructions steps 21 through 24 on page 6 of this manual BE KIT INSTALLATION Remove the monitor glass and throughly remove the old game stickers from the monitor card or bezel Peel off the backing to the game instruction decal and apply to the top of the monitor card bezel 2 Follow the KIT INSTALLATION instructions steps 2 and 3 on page 7 of this manual 8 Proprietary and confidential information not to be disclosed or copied without the express permission of COIN OP INC 5215888641 coin op INC X MEN vs STREET FIGHTER TEST MENU The test menu allows you to test the functions and configure the game These items include input devices such as joysticks buttons and coin door or switches output devices such as monitor speakers and meters
5. AAMA SERIAL E KIT A CARTRIDGE SERIAL B CARTRIDGE SERIAL AAMA SERIAL BE KIT B CARTRIDGE SERIAL AAMA SERIAL NY coin op inc X MEN vs STREET FIGHTER TABLE OF CONTENTS Warranty Information 3w 0 1 IHSDeCHON ah 1 Kit Installation FULL Kit CabinstPIeparallOl aiu GO PC B d MS 3 Control Panel Overlay 3 Reassembly of Components 3 Control Panel Wiring UN REPE DG ENS 4 Remote Volume Test Switch ere an crine 6 Game Cartridges i edu 6 Cabinet Graphics d tuo 7 B Kit eid 7 GamecCawndae Lapointe 7 E Kit amp BE Kits 8 Game ER 8 Test Mode Test Vien 9 ACCESSING the Men Y 9 Selecting an Item 9 Closing the Ment Min ides e d waste 10 Menu enLDescHploS aet 10 Confipuration Men 1 11 System Configuration a utu o ponia Nea EIN 12 Game Co fig r tion tede cna are A 13 Wiring References JAMMA Connections 14 Auxiliary Cable Connections 14 Template Control Panel Drill Hole s
6. JOIN IN SETS THE OPTION TO ALLOW OTHER PLAYERS TO JOIN IN 6 EVENT TURNS ON EVENT MODE USEFUL FOR CHAMPIONSHIP TOURNAMENTS OFF NORMAL SETTING SETS THE MODE TO NORMAL OPERATION 1MATCH MATCHES PLAYER WITH ONE CREDIT A WIN OR A LOSS RESULTS IN GAME OVER CONTINUE IS NOT AVAILABLE 7 GAME SPEED SETS THE SPEED AT WHICH CHARACTERS FIGHT FREE SELECT ALLOWS THE PLAYER TO SELECT THE GAME SPEED 8 EXIT RETURN TO THE CONFIGURATION MENU GAME CONFIGURATION OPTION SETTINGS 1 DIFFICULTY EASY NORMAL HARDI 2 DAMAGE LEVEL 10 _ T 4 AUTOMATIC 5 JOIN IN 6 EVENT EXPERT jo FASTEST JLo OE ee le MATCH 222 Proprietary and confidential information not to be disclosed or copied without the express permission COIN OP INC 13 co op ic X MEN vs STREET FIGHTER JAMMA Connections SOLDER SIDE GGNE LL O al 5 VDC 5 VDC 12 VDC G N KE N Fe ER comtor a VIDEO GREEN G N us ER COIN LOCK 2 9 VIDEO SYNC E Ru SERVICE FREE CREDIT N 2 PLAYER COIN Ou 2PLAYER START_ 2PLAYER DOWN 2PLAYER LEFT _ XT 2PLAYER LIGHTPUNCH 2 2PLAYER MIDDLEPUNCH a _4 mw ND ND C Y C C
7. Through the Test Menu you can also access the Configuration Menu where you can change the settings of the game ACCESSING THE TEST MENU Fora cabinet or a cabinet with a test switch Make sure the game is on and push the test switch The screen shown below will appear For a cabinet without a test switch Push the blue test switch on the outside of the black plastic casing refer to the inside back cover of the manual TEST MENU INPUT OUTPUT SOUND amp VOICE COLOR DOT CROSS HATCH DATA 9 EXIT SELECT 1P UP or DOWN START 1 SHOT1 SELECTING AN ITEM On the control panel move the PLAYER 1 JOYSTICK 1P UP OR DOWN to move the arrow in front of the desired item and then push the PLAYER 7 SHOT 1 1P SHOTI1 button as shown below Player 1 Joystick Player 1 Start 2 2 Player 1 Shot 1 Player 1 Shot 2 V1601 Proprietary and confidential information not to be disclosed or copied without the express permission of COIN OP INC 9 NT O coin op inc X MEN vs STREET FIGHTER SELECTING AN ITEM continued To return to the test menu push the PLAYER 1 START 1P START and PLAYER 7 SHOT 1 1P SHOT1 buttons simultaneously The test menu will return to the screen a After you exit the 7 CONFIGURATION MENU and b After the memory is tested from the menu 8 MEMORY CHECK
8. X MEN vs STREET FIGHTER CAUTION Please read the following instructions to keep the PC board in good condition Do not block the ventilation slots Do not drop or bump the board Do not spill any liquids on the case not disassemble the case ATTENTION The product that you have purchased contains a recyclable battery At the end of its useful life under various state and local laws it may be illegal to dispose of this battery into the municipal waste system Check with your local solid waste official for details in your area for recycling options or proper disposal DISASSEMBLING THE CASE OR REMOVING THE STICKER MAY CAUSE THE TERMINATION OF YOUR REPAIR WARRANTY e NT coin op inc FULL KIT INSTALLATION MAKE SURE ELECTRICAL POWER TO THE GAME IS OFF BEFORE STARTING THE KIT INSTALLATION CABINET PREPARATION 1 Remove the marquee glass old marquee overlay and the old cabinet graphics 2 Disconnect and remove the old printed circuit board s from the cabinet 3 Remove or open the control panel and disconnect and remove the buttons and joystick s from the control panel 4 Remove any covering from the control panel overlay and then remove the control panel overlay 5 Place the Drill Hole Template included in this manual over the control panel to determine where any new holes should go Center punch any needed new holes on the control panel 6 Cutout the new holes u
9. ND ND WIRE COLOR WIRE COLOR CONNECTOR ODD ROW CONNECTOR EVEN ROW NO 5 1 1 1 CV E Nie NIC 1 C gt gt E PLAYER 1 MIDDLE KICK 322222224 PLAYER 2 MIDDLE KICK noce O FE ES 95 Y BLACK WHITE TEST BRKT VOLUME COMMON EU BLACK PLAYER 2 KICK COMMON PLAYER 1 KICK COMMON BLACK 14 1 3 16 DRILL FOR PLAYER HOLE 1 3 4 DRILL FOR JOYSTICK HOLE TRIM LINE TYPICAL 1 3 16 DRILL FOR BUTTON HOLES CAPCOM INC 3311 NORTH KENNICOTT RD ARLINGTON HEIGHTS ILLINOIS 60004 X MEN VS STREET FIGHTER DRILL TEMPLATE CAPCOM coop inc X MENTM vs STREET FIGHTER REFERENCE INFORMATION GAME CASE CONTROLS COIN REGISTER COMMUNICATION PORTS es NOT USED OUT IN VOLUME DOWN JAMMA AUXILIARY CABLE AUDIO OUT FOR O SOUND CONNECTOR CONNECTOR RIGHT RED LEFT WHITE V300800 NOTE IF YOU ARE EXPERIENCING VOLUME CONTROL PROBLEMS DEPRES
10. JAMMA HARNESS TO THE GAME CARTRIDGE WILL CAUSE DAMAGE TO THE ENCLOSED PCB 24 Power up the game and set all operator adjustable options by pressing the TEST switch Follow the instructions under the TEST MENU section of this manual Cabinet Decals amp Marquee Installation 25 Install the new game marquee and and re install its protective covering 26 Peel off the backing to the game instruction decal and place on the top of the monitor card Also apply the cabinet decals to both sides of the cabinet MARQUEE MONITOR CABINET DECAL INSTRUCTION DECAL Figure 9 Cabinet Decals X MEN vs STREET FIGHTER B KIT INSTALLATION 1 To install the cabinet graphics you must follow the FULL Kit Preparation and Installation Procedure steps 1 and steps 3 through 14 2 To remove the existing B cartridge from the cartridge pull the old case clamps apart see Figure 10 Carefully remove the old B cartridge and install the new cartridge Re install the case clamps Case Clamp Figure 10 Case Clamp Installation DISASSEMBLY OF EITHER GAME CARTRIDGE WILL VOID YOUR WARRANTY 3 Power up the game and set all operator adjustable options by pressing the TEST switch Follow the instructions under the TEST MENU section of this manual Proprietary and confidential information not to be disclosed or copied without the express permission of COIN OP INC 7
11. NTIES EXPRESSED OR IMPLIED INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IMPORTANT NOTICE THIS SHIPMENT HAS BEEN CAREFULLY INSPECTED AND PROPERLY PACKAGED BEFORE LEAVING THE FACTORY WE CANNOT ASSUME RESPONSIBILITY FOR BREAKAGE THAT MAY OCCUR DURING TRANSPORTATION OF THE GAME IF THIS GAME IS DAMAGED UPON RECEIPT FROM THE CARRIER IMMEDIATELY NOTIFY THE CARRIER AND FILE A DAMAGE REPORT 11 Proprietary and confidential information not to be disclosed or copied without the express permission of COIN OP INC CAPOT coin op inc X MEN vs STREET FIGHTER KIT INSPECTION There are four kits available for cabinet conversion to X MEN vs STREET FIGHTER 1 XVS1000 FULL kit contains the complete game cartridges all necessary graphics and replacement joysticks and button switches The FULL kit is intended for conversion of most JAMMA compatible horizontal screen cabinets 2 XVS1000B B kit contains the game memory cartridge B cartridge and must also be installed to a current System II game It includes all the necessary game graphics for a cabinet conversion marquee control panel overlay monitor card etc This kit is intended for conversion of most JAMMA compatible horizontal screen cabinets currently configured with a CPS II system board A cartridge 3 XVS1000E E kit contains the complete game cartridges so
12. RETURN TO THE CONFIGURATION MENU HIGHLIGHT THIS ITEM AND PUSH EITHER THE PLAYER 1 SHOT 7 BUTTON OR THE PLAYER 1 SHOT 2 BUTTON 4 DEMO SOUND 5 SOUND MODE 6 CHUTE TYPE 7 EXIT SYSTEM CONFIGURATION OPTION SETTINGS 1 CREDIT 2 CREDITS 3 CREDITS 4 CREDITS 5 CREDITS 6 CREDITS 7 CREDITS 8 CREDITS 9 CREDITS 2 2 3 COINS 4 COINS 5 COINS 6 COINS 7 COINS 2 COINS START FREE PLAY 4 NOTE FACTORY SETTING 3 MONITOR 2 CONTINUE 4 DEMO SOUND 1 12 N 9 coin op INC X MEN vs STREET FIGHTERTM GAME CONFIGURATION CHANGING THE GAME CONFIGURATION SETTINGS Move the PLAYER 1 JOYSTICK up or down to highlight the desired option Once the option is highlighted move the PLAYER 1 JOYSTICK left or right or press the PLAYER 1 SHOT 1 button to select 7 2 GAME CONFIGURATION DIFFICULTY EXPERT DAMAGE LEVEL NORMAL TIMER SPEED NORMAL AUTOMATIC OFF JOIN IN ON EVENT OFF GAME SPEED TURBO2 EXIT SELECT OPTION 1 UP or DOWN MODIFY SETTINGS 1P LEFT or RIGHT 15 5 1 or SHOT2 GAME CONFIGURATION ITEM DESCRIPTIONS 1 DIFFICULTY SETS THE DIFFICULTY LEVEL i 2 DAMAGELEVEL SETS THE OFENSIVE POWER LEVEL 3 TIMER SPEED SETS THE SPEED OF THE COUNTDOWN FROM THE TIMER DISPLAY 4 AUTOMATIC SETS AN AUTOMATIC BLOCKING FEATURE FOR MOST CHARACTERS SHOULD BE USED ONLY FOR BEGINNING PLATERS NOT RECOMMENDED FOR MOST LOCATIONS 5
13. S AND HOLD VOLUME DOWN FOR AT LEAST 5 SECONDS AND RELEASE THEN SET VOLUME UP FOR APPROPRIATE SOUND LEVEL FOR SOUND LEVEL VERIFICATION FOLLOW THE INSTRUCTIONS IN THIS MANUAL UNDER TEST MENU AND SELECT SOUND amp VOICE TYPICAL CONTROL PANEL LAYOUT OF X MEN vs STREET FIGHTER NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense WARNING Federal law provides severe civil and criminal penalties for the unauthorized reproduction distribution or exhibition of copyrighted audiovisual works and video games The Federal Bureau of Investigation investigates allegations of criminal copyright infringement nae INC 3311 N Kennicott Avenue Arlington Heights lllinois 60004 Phone 847 797 6192 Fax 847 797 6306 Copyright 1995 CAPCOM coin op INC All Rights Reserved
14. hout the express permission of COIN OP INC CAPON coin op INC X MEN vs STREET FIGHTER CONFIGURATION MENU The Configuration Menu is used to change various game settings such as level difficulty credits sound configuration etc These settings are stored in memory on the PCB The Configuration Menu is divided into 2 sections In the SYSTEM section you can change credits sound and coin door configurations In the GAME section you can change the play difficulty level and duration of the game ACCESSING THE CONFIGURATION MENU From the TEST MENU move the arrow to 7 CONFIGURATION and push the PLAYER I SHOT 1 button The screen below will be displayed A description of each option is explained in the table below 7 CONFIGURATION MENU gt 1 SYSTEM 2 GAME 3 DEFAULT 4 SAVE amp EXIT SELECT 1P UP or DOWN START 1P SHOTI CONFIGURATION MENU ITEM DESCRIPTIONS SYSTEM Select this item to change settings for credits monitor flip sound and coin door configurations GAME Select this item to change difficulty level damage level time count speed maximum number of rounds and event type DEFAULT Use this item to restore configuration settings to the original factory values Press the SAVE amp EXIT PLAYER 1 SHOT 1 and PLAYER 7 SHOT 2 buttons at the same time to restore default values Use this to save new configuration settings and exit to the Test Me
15. me game graphics and an auxiliary cable for connections to the control panel and remote test bracket This kit is intended for conversion of most 6 button JAMMA compatible horizontal screen cabinets 4 XVS1000BE BE kit contains the game memory cartridge B cartridge and must also be installed to a current CAPCOM System 11 game It includes a game instruction decal and an operators manual This kit is intended for conversion of most 6 button JAMMA compatible horizontal screen cabinets currently configured with a CPS II system board A cartridge Check that all parts have been shipped Y with your kit If any parts are missing contact your distributor immediately KIT PARTS LIST XVS1000 XVS1000B XVS1000E XVS1000BE PART NO DESCRIPTION 81400 GPSHSysemCanidges AB 1 evs COSI System Cartridge B Mame 1 Frawoo21e 0 06 6 7 1 25 24 _ gt ae 1 eje a 7 110156 i oB SwichButon 10 62 Cab Auxiliary 1 re e gt poem h 13 0066 Bracket A Cartridge Mounting 4 520010405 A Proprietary and confidential information not to be disclosed or copied without the express permission of COIN OP INC 1 GN GW coin op INC
16. nu The message SAVING NEW CONFIGURATION IN EEPROM will appear while the new settings are being saved DO NOT turn power off to the game until SAVING is complete and the Test Menu reappears Proprietary and confidential information not to be disclosed or copied without the express permission of CAPCOM COIN OP INC 11 ANTI A coin op INC X MEN vs STREET FIGHTER SYSTEM CONFIGURATION CHANGING THE SYSTEM CONFIGURATION SETTINGS Move the PLAYER 1 JOYSTICK up or down to highlight the desired option Once the option is highlighted move the PLAYER 1 JOYSTICK left or right or press the PLAYER 1 SHOT 1 button to select 7 1 SYSTEM CONFIGURATION COIN MODE 2 COINS 1 CREDIT CONTINUE ON MONITOR NORMAL DEMO SOUND ON SOUND MODE STEREO QSOUND CHUTE TYPE 2 CHUTES SINGLE EXIT SELECT OPTION 1 UP or DOWN MODIFY SETTING 1P LEFT or RIGHT 1 SHOT1 or SHOT2 SYSTEM CONFIGURATION ITEM DESCRIPTIONS SELECT THE CHARGE PER PLAY 2 CONTINUE SELECT ON FOR CONTINUOUS PLAY OR OFF FOR NON CONTINUOUS PLAY 3 MONITOR FLIPS THE POSITION OF THE SCREEN IF THE SCREEN APPEARS UPSIDE DOWN CHANGE THE SETTING TO FLIP IF THE SCREEN APPEARS CORRECT SELECT NORMAL TURNS ATTRACT SOUNDS ON OR OFF SELECT STEREO OR MONAURAL FOR USE WITH YOUR CABINET NOTE STEREO SHOULD ONLY BE SELECTED FOR USE WITH OSOUND CABINETS SELECT THE NUMBER OF PLA YER S AND COIN CHUTE TO SAVE THE SETTINGS AND
17. omponents 14 Install all buttons and retaining rings on the control panel as shown in Figure 2 Install two RED buttons to the immediate right of each joystick install two GREEN buttons to the right of the red ones and install two BLUE buttons to the right of the green ones Proprietary and confidential information not to be disclosed or copied without the express permission of CAPCOM COIN OP INC 3 coin op INC X MEN vs STREET FIGHTER Control Panel Red Green Blue Red Green Blue Red Green Blue Red Green Blue Buttons Retaining Rings Switches FIGURE 4 FIGURE 2 Joystick Installation Control Panel Buttons and Switches connector and the appropriate control or switch wire on 15 Notice that there are two white buttons See the normally open connector of the switch Figure 3 Install the PLAYER ONE button on the top left hand side of the control panel and the PLAYER 18 Reconnect the existing JAMMA connectors to the TWO button on the top right side of the control panel control panel according to Table 1 The WHITE buttons are START buttons 19 Connect the Player 1 and Player 2 buttons to the auxiliary cable harness connectors shown in Figure 5 1 Pla 2 the connections according to Table 2 TO GAME CASE CONNECTOR FIGURE 3 Function and Start Buttons 16 Install the switched on the buttons as shown in Figure 2 Orient the switches so that when a button is p
18. ressed the red contact on the switch is depressed 17 Install the joysticks on the control panel as shown 6 TO PUSH BUTTON in Figure 4 SWITCHES Wiring TO VOLUME amp TEST NOTE SWITCHES switch wires used in this game must be wired to the normally open connection on the switches Each switch FIGURE 5 requires a ground wire on the common Auxiliary Cable Harness 4 Proprietary and confidential information not to be disclosed or copied without the express permission of COIN OP INC CAPCOM coin op X MEN vs STREET FIGHTER CONNECTOR REF WIRE COLOR TO COMPONENT FUNCTION 0 4 el VIOLET BLACK PLAYER 2 JOYSTICK VIOLET RED PLAYER 2 JOYSTICK prar o e VIOLET YELLOW Table 1 JAMMA Wiring Connections Wire Color Note Wire colors shown are according to the AAMA AMOA Standard for wire color assignments your harness may contain different colors than shown above PLAYER 2 PLAYER 2 PLAYER 2 TEST BRACKET TEST BRACKET TEST BRACKET Table 2 Auxiliary Cable Wiring Connections e CAPCOM COIN OP INC X MEN vs STREET FIGHTER 20 An optional Test Volume bracket see Figure 6 is available through your local Capcom distributor part number 03 0050 Your cabinet may already contain this bracket When installing the bracket
19. should be mounted inside the coin door and on top of the cashbox for easy access NOTE The A cartridge also contains the same Test and Volume functions found on the test bracket UP VOLUME TEST DOWN V300500 Figure 6 Test Bracket Wiring of the Test Bracket requires connections to both the main JAMMA harness as well as the Auxiliary Cable harness refer to Table 3 COLOR FUNCTION TO YELLOW VOLUME UP AUX CABLE YELLOW AUX CABLE AUX CABLE Tor T or 2 WHITE BLACK VOLUME DOWN 30 PINK YELLOW GREEN COMMON 3T BLACK WHITE BLACK GROUND JAMMA or or or 27 or 28 Table 3 Test Bracket Wiring Chart Game Cartridge Installation 21 Install the four 4 mounting brackets to the underside of the cartridge as shown in Figure 7 Figure 7 Mounting Bracket Installation 22 Using the supplied wood screws fasten the game cartridge case to the control panel shelf as shown in Figure 8 Figure 8 Case Mounting 23 Connect the JAMMA harness connector and the Auxiliary Cable connector to the cartridge If your cabinet is equipped with Q SOUND also attach the audio cables 6 Proprietary and confidential information not to be disclosed or copied without the express permission of COIN OP INC CAPON IN OP INC AN CAUTION IMPROPER INSTALLATION OF THE
20. sing a 1 3 16 hole saw 7 there is an additional control panel cover such as plastic or lexan that will be utilized cut any additional holes using the same template 8 Plug up unused holes with wood dowel 1 1 8 diameter being careful to sand any rough edges or use available button plugs KIT INSTALLATION Control Panel Overlay Installation See Figure 1 9 The control panel overlay in the kit is oversized to accommodate most control panel sizes Center the overlay on the control panel leaving some excess material at the edges X MEN vs STREET FIGHTER 10 Remove the protective backing from the overlay and press it down on the control panel keeping it properly aligned Press it down firmly smooth out any bubbles and press it over the edges 11 Trim any excess from the overlay Place the drill hole template on top of the overlay aligning it with the joystick holes Pierce through the overlay at each control panel hole Then cut away overlay material covering the joystick and button holes Remove the template and clean off the overlay 12 Peel off the backings of the 6 button and joystick decals align over the control panel holes and press in place on the overlay refer to the drill hole template for proper placement Using a knife trim material from the center hole of the joystick decal 13 Install the control panel cover if required Figure 1 Overlay Installation Reassembly of C

Download Pdf Manuals

image

Related Search

Related Contents

Sennheiser MX W1  ECE 220 / 220 HP / 220 XL / 225    AT2010 - Audio Technica  DOSAGE RÉGULATION - Catalogue Astralpool 2014  Manual del usuario del EPSON Stylus CX5400  235KB  

Copyright © All rights reserved.
Failed to retrieve file