DP1213 User Manual Ver 1 53 ENG 04-05-08
Contents
1. Level SAVE Level RESET Manual Emergency Press UP A or DOWN Vio select one of the three modes of dimmer s reaction in case of losing the DMX signal e Level SAVE mode the value of the latest DMX signal is saved e Level RESET mode all the channels turn down if the DMX signal disappears e Manual Emergency setting the output signals recorded in the memory of the device in the scene Cue 13 e 4 Press OK to confirm In the last line of the display symbol appears 5 f Level RESET mode is selected symbol F appears in the last line of the settings menu If Manual Emergency mode is selected symbol E appears in the last line of the settings menu DMX NO A 001 PF DMX NO A 001 PE 2 6 EDIT CURVE mode 1 Enter MAIN MENU press RIGHT or LEFT to select the mode in this mode you can choose a law according to which each channel will be regulated MAIN MENU Edit Curve 2 Press OK Q to enter the mode EDIT MENU i Ch 01 Curve LL 10 3 Press UP A or DOWN Vio select the number of channel from 1 to 12 or AL Press OK move the cursor to Curve Press UP A or DOWN v to choose one of the 4 laws of regulation for the selected channel Press OK i 4 The dimmer provides 4 laws of regulation e LL curve linear law e LS curve luminosity linear law e LQ curve logarithmic law e SR curve switch on off law 5 Repeat paragraph 3 for all channels 6 Press LEFT to quit to MAIN MENU2. Power supply connection Terminals 65A 600V 10sq mm Load connection Terminals 30A 600V 4sq mm Mounting into rack Block size mm W x D x H 482 x 424 x 132 3U h Block weight no more than kg 14 5 Package size mm W x D x H 540 x 495 x 205 Overall weight no more than kg 16 0 1 2 Installation 1 2 1 Bundling e Block of dimmers PD1213 e Manual 1 2 2 Before installation Please read this paragraph carefully before installation This device is not designed for home use Do not switch on power until the device is ready for use All connections of the dimmer should be done by qualified staff Do not install close to sources of heat Install the dimmer in a well aerated place Do not block air supply to the front and back panels of the dimmer e The dimmer should not be installed in the following places v Wet places or places with very low or high humidity less than 35 and more than 8096 v Places prone to vibration and strokes v Places with surrounding temperature below 2 C and above 40 C CAUTION The dimmer MUST be earthed 5 1 3 Connection of Dimmer PD1213 1 3 1 Front panel Oo DEPEXK 12 chxi3a O i rs 1 2 3 4 5 6 7 8 9 10 11 12 The Lighting Company o Oo 1 3 2 Back panel O z a n z 70 O O n iN sN AE m ABB Oo o DMXIN DMXOUT O o o
3. 2 7 EDIT PREHEAT mode 1 Enter MAIN MENU press RIGHT gt or LEFT lt to select the mode in this mode you can choose the preheat rate of filaments for each channel of the dimmer MAIN MENU Edit Preheat 2 Press OK to enter the mode EDIT MENU Ch 01 Preheat 00 3 Press UP A or DOWN Vio select the number of channel from 1 to 12 or AL Press OK e move the cursor to Preheat Press UP A or DOWN v to choose the preheat rate from 0 to 20 Press OK 4 Repeat paragraph 3 for all channels 5 Press LEFT to quit to MAIN MENU 2 8 EDIT LIMIT mode 1 Enter MAIN MENU press RIGHT gt or LEFT lt to select the mode in this mode you can limit the luminosity for each channel MAIN MENU Edit Limit 2 Press OK to enter the mode EDIT MENU s Ch 01 Limit FF 3 Press UP A or DOWN Vio select the number of channel from 1 to 12 or AL Press OK f move the cursor to Limit Press UP A or DOWN Vio choose the limit from 100 to 20 Press OK ifa 4 Repeat paragraph 3 for all channels 5 Press LEFT to quit to MAIN MENU 2 9 EDIT CUE mode 1 Enter MAIN MENU press RIGHT gt or LEFT lt to select the mode in this mode you can programming CUE max 13 MAIN MENU Edit CUE 2 Press OK to enter the mode the cursor is on cue C B EDIT CUE E C 01 Ch 01 Lv 00 3 Press UP A or DOWN Vio select the number of cue C from 1 to 12 or 13 cue uses the Manual Emergency mode Pre
4. O CAUTION O O ui 7 o o LCOMMON 2 DATA 3 DATA 12 chx 13A MAIN 3 N PE 380V 50Hz MAX 30kW Oo Oo Serial Ne Oo Oo L C DTS ILLUMINAZIONE SRL Cy MADE IN EUROPE O OUTPUT 112 Oo o MAINS INPUT O O Oo Oo e L1 L2 L3 phases of power supply e N neutral e earthing e Power for the dimmer should be fed from a electromagnetic breaker e Power load connections and XLR 5pin connectors for DMX 512 connection are provided via terminals on the back panel of the block On the front panel automatic 13A switchers the block control buttons and the LCD display are situated 1 3 3 DMX 512 signal connection The interface cable should conform to the protocol EIA RS 485 specifications and possess the following characteristics v 2wires braded screen Y resistance 120 Ohm Y low capacity Y provide max transmission speed of 250Kbit s Cable connection See the picture Make sure that the screen is connected to contact 1 DMX IN 1 COMMON 2 DATA 3 DATA CAUTION The braded screen of the cable MUST NOT touch the earth wire of the system as it can cause malfunctions 6 1 3 4 An example of the DMX line connection In order to get true data keep to the following settings of the connection line Max length of the connection line Max number of devices Cable laying De not lay the cable close to power lines Terminator structure A resistor of 120 Ohm between contacts 2 and 3 of the last connec
5. Patch On appellation of a unique DMX address to each channel of the dimmer e Manual 2 4 DMX ADDRESS mode 1 Select MAIN MENU press RIGHT gt or LEFT lt to select the mode MAIN MENU DMX Address 2 Press OK to enter the mode If the protocol mode is PATCH OFF see paragraph 2 2 the display reads the following DMX ADDRESS First DMX 001 3 Press UP A or DOWN v to select the initial address of the DMX signal from 1 to 512 Press O K to confirm the selected address The display reads the following MAIN MENU DMX Address 4 Press UP A to enter the mode If the protocol mode is PATCH ON see paragraph 2 2 the display will read the following DMX ADDRESS Ch 01 DMX 001 5 Press UP A or DOWN v to select the number of channel from 1 to 12 or AL press OK J move the cursor to DMX 6 Press UP A or DOWN v to select the DMX address from 1 to 512 press OK O move the cursor to Ch 7 Repeat the actions described in paragraphs 5 and 6 for all channels 8 Press LEFT lt to quit to MAIN MENU The factory default in the PATCH ON mode is the following channel 1 has address 1 channel 2 has address 2 etc 2 5 DMX FAULT mode Enter MAIN MENU press RIGHT or LEFT to select the mode in this mode you can choose the reaction of the dimmer on losing the DMX signal MAIN MENU DMX fault 2 Press OK to enter the mode DMX FAULT P DMX FAULT li DMX FAULT
6. Pwr Ok Ok Ok 3 The first line reads the temperature of block radiators in C the last line reads availability of all phases of the feeding network symbol OK in case the phase is off symbol Bad 4 Enter MAIN MENU press LEFT lt The display will read the following mode CUE MANUAL CUE 01 The first line reads channels level The last line shows the following information e Mode MANUAL e Number CUE 5 Press RIGHT gt or LEFT lt now you can see the following STATUS DEVICE RAMPA The first line reads STATUS DEVICE The last line shows the following information the given name of the block 3 Circuits protection 3 1 Temperature protection the maximum temperature of any of the radiators can achieve the rate of 80 C When this rate is achieved the dimmer s outputs turn to off The display reads the following The display light starts to blink T C Hi 23 ALARM Pwr Ok Ok Ok Having cooled down the dimmer starts again 3 2 Protection of disappearing of one or two phases if the voltage of phase L2 or L3 of the power circuit disappears the following message is displayed The display light starts to blink T C 23 24 ALARM Pwr Ok Bad Bad After the breakdown is dealt with the dimmer starts again 3 3 Load protection is provided by 13A electromagnetic breakers 15 The information contained in this publication has been carefully prepared and checked However no responsib
7. mode 1 Enter MAIN MENU press RIGHT or LEFT lt to select the mode all the settings return to factory default MAIN MENU Set by default 2 Press OK Q to enter the mode Set by default Are you sure 3 Press simultaneously LEFT lt and RIGHT gt to confirm All the settings will return to factory default All the settings will return to factory default DMX NO A 001 2 14 CHANNEL TEST mode 1 Enter MAIN MENU press RIGHT gt or LEFT lt to select the mode MAIN MENU Channel Test 2 Press OK Q to enter the mode TEST MENU P Ch 01 Level 00 3 Press UP A or DOWN v to select the number of channel from 1 to 12 or AL press OK move the cursor to Level Press UP A or DOWN Vio choose the output signal rate from O to 100 Press OK the cursor will move to Ch 4 Repeat paragraph 3 for all channels 5 Press LEFT to quit to MAIN MENU 2 15 SETTINGS DISPLAY 1 Enter MAIN MENU press RIGHT gt or LEFT The display will read the following DMX OK A 001 The first line reads channels level The last line shows the following information e DMX availability DMX OK e DMX absence DMX NO the display light twinkles to attract staff s attention e Signal receipt error DMX ER the display light twinkles e Initial block address in PATCH OFF mode 4 e First channel address in PATCH ON mode 2 Press RIGHT or LEFT lt now you can see the following T C 24 23
8. DP1213 Lighting Dimmer User Manual ver 1 53 ENG The Lighting Company Basic information Please read this manual carefully before placing DP1213 in operation e Block of dimmers DP1213 is designed to regulate the intensity of light in theatres discotheques etc DO NOT DISMANTLE OR ALTER THIS DEVICE In case of malfunction IMMEDIATELY switch off power Do not open the device Do not try to fix the device on your own Turn to your distributor Block of dimmers DP1213 conforms to standard TU 3434 001 434800356758 06 is certified with system ROSTEST conformance certificate Ne POCC RU AH46 B16038 e The warranty period for this device is 24 months of the day of sale e The warranty period ceases in case of self repairing of the device Manufacturer DTS Illuminazione srl Via Fagnano selve 10 12 14 47843 Misano Adriatico RN ITALIA Tel 39 0541 611131 Fax 39 0541611111 info dts lighting it http www dts lighting it Made in Europe Contents Page 1 Basic characteristics 1 1 Technical characteristics 1 2 Installation 1 2 1 Bundling 1 2 2 Before installation CO1010101 C01 1 8 Connection of Dimmer DP1213 1 3 1 Front panel 1 3 2 Back panel 1 3 3 DMX 512 signal connection 1 3 4 An example of the DMX line connection 1 3 5 DMX line terminator structure 1 3 6 First switching on 1 3 7 Using the microprocessor 40000 Menu pictures description MAIN MENU STATUS DEVICE mode PROTOCOL mode DMX AD
9. DRESS mode DMX FAULT mode EDIT CURVE mode EDIT PREHEAT mode 8 EDIT LIMIT mode 2 9 EDIT CUE mode 2 10 SOFT START mode 2 11 DISPLAY mode 2 12 FAN mode 2 48 SET BY DEFAULT mode 2 14 CHANNEL TEST mode 2 15 SETTINGS DISPLAY 3 Circuits protection 1 Basic Characteristics e Power supply 380V 3 PHASES NEUTRAL Frequency 50 Hz Power supply of electronics by one PHASE and NEUTRAL e Max supply 45A per PHASE e input control signal DMX 512 optoizolate e Cooling system forced air cooling by cooler Smooth rotation speed control depending on the temperature of radiators e Protection output power circuits protected by electromagnetic circuit breakers 13A Electronics power circuit protected by a 0 25A safety fuse situated on the board near the feeding transformer Temperature control of the radiators provided by the microprocessor With the temperature of radiators above 80 C output signals are blocked e Microprocessor settings control from the front panel via the keyboard and the LCD display by means of the menu e Modes of operation individual control of each channel from the operator s desk test mode soft start mode 1 1 Technical characteristics Power supply 380V three PHASES NEUTRAL Frequency 50 Hz Number of channels 12 Max output each channels 2500VA Load active or inductive Interference suppression filter LC 120 mcs Power element Inverse parallel SCRs 35A Control signals DMX 512
10. In the last line of the display symbol appears 4 Press LEFT lt to quit to MAIN MENU 2 12 FAN mode 1 Enter MAIN MENU press RIGHT gt or LEFT lt to select the mode FAN MAIN MENU FAN 2 Press OK e to enter the mode FAN MENU FAN MENU FAN Lin SPEED FF FAN Int SPEED FF FAN MENU FAN MENU FAN On SPEED FF FAN Off SPEED FF 3 Press UP A or DOWN Vio select pexuM pa6oTb i FAN e FAN Lin fan performance is changed depending on radiators temperature As soon as radiators temperature achieves the rate of 32 C the fan starts at speed one then speed increases in proportion to the rise in temperature When radiators cool down to about 27 C the fan switches off e FAN Int should at least 2 channels of the dimmer reach the rate of 50 or 4 channels of the dimmer reach the rate of 1095 the fan turns to max speed The fan switches off within 30 sec after all the channels fall to 096 e FAN On the fan is ALWAYS ON independently of reading of the temperature sensor e FAN Off the fan is OFF The fan switches on automatically at maximum speed should temperature of at least one radiator of the dimmer exceed 50 C and remains on until the temperature falls to about 30 C 4 Press OK o move the cursor to SPEED FF Press UP A or DOWN Vio choose the max speed of the fan The speed rate lies between 37 and 100 Press OK 5 Press LEFT lt to quit to MAIN MENU 13 2 13 SET BY DEFAULT
11. ility will be taken for any errors All rights are reserved and this document cannot be copied photocopied or reproduced in part or completely without prior written consent from D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice D T S assumes no responsibility for the use or application of the products or circuits described herein The Lighting Company D T S Illuminazione s r Via Fagnano Selve 10 12 14 47843 Misano Adriatico RN Italy Tel 39 0541 611131 Fax 39 0541 611111 info dts lighting it www dts lighting it 16
12. immers can be given a name containing no more than 16 symbols for example SOFIT 1 RAMPA and the like Capital letters of the Latin alphabet space and figures from 0 to 9 may be used 2 Press OK to enter the mode the display reads the following STATUS DEVICE 3 Press UP A or DOWN v to choose letters and figures you need see paragraph 2 2 1 for each of the 16 character cells STATUS DEVICE f 4 Press OK o the cursor will move automatically to the next cell 5 By pressing and retaining uPA you can move to the letter Z 6 By pressing and retaining pown V you can move to the symbol space 7 By pressing RIGHT or LEFT lt you can move the cursor from one cell to another 8 To quit STATUS DEVICE mode use LEFT lt to move the cursor to the leftmost position and then press this button again 2 3 PROTOCOL mode Enter MAIN MENU The display reads the following MAIN MENU Protocol 2 Press OK Q to enter the mode PROTOCOL MENU DMX Patch OFF 3 Press UP A una DOWN v to select a mode PROTOCOL MENU PROTOCOL MENU DMX Patch ON MANUAL 4 Press OK Q to confirm to the right of the mode name symbol appears 5 To quit the menu press LEFT 4 6 If DMX Patch ON mode is selected in the last line of the settings menu symbol P appears DMX NO A 001P Input signal modes are the following e Patch Off appellation of a DMX address to the dimmer e
13. ss OK move the cursor to channel Ch Press UP A or DOWN Vio choose the Channel from 1 to 12 or AL Press OK move the cursor to level Lv Press UP A or DOWN Vio choose the level from 0 to 100 Press OK o To repeat paragraph 3 for all channels 4 Press LEFT to quit number of cue C 5 Press LEFT lt to quit to MAIN MENU All the cues are recorded in the flash memory of the device 2 10 SOFT START mode 1 Enter MAIN MENU press RIGHT or LEFT to select the mode MAIN MENU Soft start 2 Press OK to enter the mode SOFT START Status OFF 3 Press UP A or DOWN Vio select one of the two modes Status OFF soft start mode off or Status ON soft start mode on Press OK o When the mode is on the output signal achieves its maximum value in about 0 2 seconds 4 Press LEFT lt to quit to MAIN MENU CAUTION All the settings of the dimmer are saved in the flash memory and are available even after power is switched off 12 2 11 DISPLAY mode 1 Enter MAIN MENU press RIGHT or LEFT lt to select the mode in this mode you can control the display illumination MAIN MENU Display 2 Press OK C to enter the mode DISPLAY MENU DISPLAY MENU LED Always on LED Auto off 3 Press UP A or DOWN Vio select one of the two modes Always On or Auto Off the illumination turns off automatically in 40 seconds after the latest pressure of any button Press OK to confirm
14. tor 1 3 5 DMX line terminator structure On the end of the DMX line a terminator should be installed It is a resistor of 120 Om and power of 0 25W situated between contacts 2 and 3 of the standard 3 5 contact XLR connector 1 3 6 First switching on As soon as you have switched on the dimmer the display reads the following DTS Illuminazione DP1213 ver 1 53 DMX No A 001 1 3 7 Using microprocessor A o v To list through the menu use buttons RIGHT LEFT lt Press OK to enter the menu N To change settings use buttons UP DOWN A wv e 4 To confirm change of the settings press button o 5 To quit the menu press LEFT lt 2 Menu pictures description 2 1 MAIN MENU In this menu dimmer setting modes can be selected STATUS DEVICE Protocol DMX ADDRESS DMX fault EDIT CURVE EDIT PREHEAT EDIT LIMIT EDIT CUE SOFT START DISPLAY FAN Set by default CHANNEL TEST To select a mode do the following 1 Enter MAIN MENU by pressing OK B while in the settings menu MAIN MENU Status Device 2 By pressing buttons RIGHT gt or LEFT lt in the last line of the display select the mode you need see paragraph 2 1 3 Press OK to enter the mode you need Press LEFT lt to quit the settings menu DMX NO A 001 2 2 STATUS DEVICE mode 1 Enter MAIN MENU The display reads the following MAIN MENU Status Device In this mode the block of d
Download Pdf Manuals
Related Search