User's Manual Switch for medical gas distribution line
Contents
1. Keep the original packaging for use in case of any further transport and for storage Damage to the appliance caused during transport and handling is not covered by the guarantee Repairs or replacement of the damaged parts are the responsibility of the client The device must be stored in a dry cool area away from direct sunlight It must not be placed in contact with any substances or chemical agents which could cause damage and reduce safety characteristics 4 2 Preparation On receipt of the product e Remove the packaging and display the material so that all components are visible e Check that all the components pieces on the accompanying list are present e Connect the two F 1 4 inlets G of the turning connections to the non toxic oxygen tube crimped with M 1 4 G leading from the two pressure reducers on the cylinders Use fittings with O ring seals already integrated e Connect the outlet on the opposite side of the knob to the plug block using non toxic oxygen tube crimped with M 1 4 G Use a sealant adapt for use with oxygen or tape for oxygen LN For Pop module make the calibrated lodgement for the POP module The dimensions of the hole for a single H H k 4 4 PROBLEM Leakage in the distribution system of medical gas near to the deviator The system has not closed or changed cylinder with the turning of the knob by 90 or 180 module is height 75 mm length 92 mm Make sure the dimens2. is being used the assistance of qualified staff must be guaranteed Do not store the device underneath any heavy objects which could cause structural damage Store in a cool dry dark place and do not expose to direct sun Store and transport device in its original packaging The device not be exposed to or come into contact with any source of combustion or inflammable agents Position and adjust the device taking care not to cause any obstruction to rescuers and or any other rescue equipment Attention laboratory testing post production tests instruction manuals cannot always consider every possible scenario for use This means that in some cases the performance of the product could be notable different from results to date obtained Instructions are continually being updated and are under tight surveillance of fully qualified staffs with adequate technical formation With reference to the D Lgs 24th February 1997 n 46 emended by D Lgs 25 01 2010 n 37 Acknowledgement of Directive 93 42 CEE and 2007 47 CE we remind both public and private operators that they are obliged to report any accident that involves any medical device to the Ministry of Health and to the Manufacture as specified and within time given by the European regulations In addition both public and private operators are obliged to inform the Manufacturer of any measures that should be adopted to make the steps necessary to guarantee the safety and the health of the patien
3. register which will certify the eligibility of the operators to use the Spencer device has to be kept for a period of 10 years after the disposal of the device itself This register will be made available to the Competent Authorities and or Manufacturer if requested Spencer Italia S r l is always at your disposal to plan trainings on products e Before carrying out any kind of operation on the appliance training installation use the operator must carefully read the enclosed instructions paying particular attention to the correct safety precautions and to the procedures to be followed for installation and for correct use If the instructions belong to another device and not the device received inform the Manufacturer immediately and avoid use of the device e In the case of any doubts as to the correct interpretation of the instructions please contact Spencer Italia S r l for any necessary clarifications Do not allow untrained persons to help during the use of the device because they could cause damage to the patient or to themselves Regularly check the appliance carry out the prescribed maintenance and respect the average life span as indicated by the manufacturer in this user s manual Before each use of device the perfect operating state of the device must be checked as specified in the Instruction manual If any damage or abnormalities which could in any way influence the correct functioning and the safety of the devi
4. P DEVIATION MODULE CYLINDER 1 CYLINDER 2 OFF OX07200A REK OX DEVIATION MODULE CYLINDER 1 CYLINDER 2 OFF WITHOUT MONITOX OX07202A REK OX DEVIATION MODULE CYLINDER 1 CYLINDER 2 OFF IN LINE 3 4 Technical data Characteristics Technical data Weight Pop kg Weight Rek Ox kg Functioning pressure bar 3o09 Pressures higher than 5 bar 500 Kpa might damage the device 3 5 Reference standards Reference Title of document MDD 93 42 CEE Modifications to 90 385 CEE Directive about active implants Directive MDD 2007 47 CEE 93 42 CEE about medical devices and Directive 98 8 CE about the introduction of biocides onto the market Medical devices Symbols to be used with medical device labels UAE ELENI RLA labelling and information to be supplied Part 1 General requirements UNI CEI EN 1041 Information supplied by the medical devices manufacturer CEI EN 62366 Medical Devices Application of the utilisation characteristics of engineering to medical devices UNI EN 14155 Clinical evaluation of the medical devices for human beings Part 2 Clinical evaluation plans 3 6 Environmental conditions Functioning temperature from 10 to 50 C Storage temperature from 20 to 60 C Relative humidity from 5 to 95 4 OPERATING INSTRUCTIONS 4 1 Transport and storage Before transporting the appliance make sure that it is correctly packaged ensuring also that there are no risks of shocks bumps or falls during the transport itself
5. The appliance must be checked before every use so as To reveal any working abnormalities and or damage caused by transport and or storage M 1 2 yn 4 Ke _ othe gt J NN a For Rek Ox module make the appropriate 4 holes 4 mm and secure with countersunk M4 screws class 10 9 In the rear part of the wall to which the Rek Ox module is fixed is necessary that there is a counter or a structure to guarantee the resistance of the fastener Functioning Troubleshootinc CAUSE 5 MAINTENANCE AND CLEANING Cleaning With the gas closed Position the knob vertically Open the cylinder so that the gas pressure of inlets of deviator is at correct level for use Turn the knob anticlockwise as far as possible to activate cylinder n 1 and check the pressure in the terminal unit Turn the knob clockwise as far as possible to activate the cylinder n 2 and check the pressure in the terminal unit When no longer in use reposition the knob vertically in the OFF position The knob does not automatically position itself so the correct position of the knob for the application needed must be checked REMEDY Washers sealing products or tube Check that the joints are correctly clamps are not adapt tightened and control leakage in distribution system Hole on Knob for connection to the Replace the adjustment knob deviator is damaged Failure to carry out the correct cleaning routine could increase the r
6. User s Manual Switch for medical gas distribution line SPENCER CE 0123 C C0123 This appliance conforms with the Directive 93 42 CEE Medical Devices Guarantee of Quality system for the production and the final control of the products certified by the notifying body TUV SUD Product Service GmbH INDEX General information page 2 Operating instructions page 4 Warnings page 2 Maintenance and cleaning page 6 Product description page 3 Accessories and spare parts page 6 First edition 30 06 10 Rev 2 23 02 15 Spencer Italia S r l Strada Cavi 7 43044 Collecchio PR ITALY Tel 39 0521 541111 Fax 39 0521 541222 E mail info spencer it r Thank you for choosing a Spencer product 1 GENERAL INFORMATION 1 1 Aim and contents The aim of this manual is to supply all the information necessary so that the client will not only attain adequate use of the appliance he will also be capable of using the instrument in the most autonomous and secure way possible This includes information regarding technical aspects functioning maintenance spare parts and safety 1 2 Conservation of the instruction manual The instruction and maintenance manual must be kept together with the product for the whole life of the device inside the specially provided container and above all away from any substances or liquids which could compromise perfect legibility 1 3 Symbols used Symbol Meaning i pd General or specific
7. ase note that you must do the cleaning as described in paragraph 5 1 and verify functionality before and after each use Spencer Italia S r l declines any responsibility for the proper functioning or damages caused to the patient or user by the use of devices not subject to routine maintenance warranty and will void the compliance to the Medical Device Directive 93 42 CEE The person responsible for every day maintenance can substitute the Spare parts indicated on paragraph 6 2 Spare Parts only if authorized by the manufacturer or by a centre authorised by Spencer Use only accessories original spare parts approved by Spencer Italia S r l otherwise we will accept no responsibility for the incorrect functioning and or damage caused by the use of any device which has not been repaired or certified on expiry date by the Manufacturer or by one of the Manufacturer s Authorised Service centres Warranty will be considered void in compliance with the Medical Device Directive 93 42 EEC 5 2 2 Periodic maintenance The device does not require periodic review of the planned interventions by the Manufacturer or an authorized centre but is prescribed to clean it and check it as described on the paragraphs 5 2 1 5 2 3 Special servicing Only the Manufacturer or centres with written authorisation are authorised to complete any special servicing operations For any operations that are not carried out directly by the Manufacturer but by an author
8. ce of the patient and or of the user are detected the device must be immediately removed from service and the Manufacturer must be contacted e If any failure or incorrect functioning of the device is detected it must be immediately substituted with a similar item so that the rescue procedures are guaranteed without any interruption Use of the device in anyway other than described in this manual is forbidden e Do not alter or modify in any way the appliance any such interference could cause malfunctions and injury to the patient and or rescuer e The appliance must not in any way be tampered with modification adjustment addition replacement In such cases all responsibility will be denied for any malfunctions or injuries caused by the appliance itself moreover CE certification and product warranty will be considered void Those who modify or have modified prepare or have prepared medical appliances in such a way that they no longer serve the purpose for which they were intended or no longer supply the intended service must satisfy the valid conditions for the introduction onto the market 2 2 3 Handle with care Ensure that all the necessary precautions are taken in order to avoid the hazards that can arise as the result of contact with blood or body fluids Register and store with these instructions lot number place and date of purchase first date of use date of checks name of users any comments When the device
9. he patient and or rescuer and the lack of warranty The manufacturer won t be anymore responsible for the product The product must be used by trained personnel only Do not force the knob over the end position It could cause damage Do not use teflon tape or other materials and sealants liquid for input and output connections of the medical gas their use could cause damage to the device When not in use the source of medical gas to the deviator must be closed Contraindications and side effects The use of this device if used as described in this manual does not present any contraindications or collateral effects 3 DESCRIPTION OF PRODUCT 3 1 Intended use The manual deviator has been designed for use in low pressure medical gas distribution systems oxygen medical air vacuum and nitrous oxide so that in just one simple operation the continuous supply of gas distribution on appliances is ensured 3 2 Main components 3 2 1 Main components Pop Deviation module Hex keys and fixing nuts for attachment to Pop block Pop block and caps with sliding block complete with springs 3 ta Knob with fixing hex key Turning connections Deviator label for Pop 3 2 2 Main components Rek Ox Deviation module Rek Ox block Knob with fixing hex key Turning connections Deviator label for Rek Ox 3 3 Models These models could be modified with reference to codes and or descriptions without any previous notification OX04306A PO
10. ill be deemed fully responsible for all damages that might occur Therefore we expressly disclaim any responsibility and or liability for your non compliance with the present regulatory provisions Specific warnings Establish a maintenance program and periodic testing identifying a reference employee The person to whom the ordinary maintenance of the device is entrusted must ensure the basic requirements foreseen by the manufacturer in the user s manual Training routines must be registered on a special register in which the names of those trained of the trainers date and place are indicated This register which will certify the eligibility of the operators to use the Spencer device has to be kept for a period of 10 years after the disposal of the device itself This register will be made available to the competent authorities and or manufacturer if requested Use only accessories spare parts that are original or approved by Spencer Italia S r l in order to carry out any operation without causing any alteration or modification to the device otherwise we assume no responsibility for the proper functioning or damage resulting from device to the patient or the operator and warranty and will be considered void according to the compliance to the Medical Device Directive 93 42 CEE Do not lubricate the product Avoid contact with sharp objects Do not alter or modify in any way the appliance any such interference could cause malfunctions and injury to t
11. ions of the lodging are as indicated above Failure to do so would compromise the correct assembly of the module Adjust the Pop module to the thickness of the wall to which it is assembled Adjustment is done by cutting the plastic extensions on the base of the lodging The extensions are respectively 3 5 7 10 mm Follow the operations shown in the picture below 1 Lower the moving part of the module as far as possible Insert module in the hole made First push lower part as far as possible into the hole and then the upper part 2 Check that the part is level with the wall and position the other half on top Screw up the attachments on the sides 3 After checking that the module is level with the wall screw up the attachments on the edges of the module until complete fixation to the wall piece Do not over tighten these attachments doing so could cause irreparable damages to the module Screw only until it feels tight and then just give an extra half turn 4 Assemble the lid with its label on the module checking that it is correctly positioned on the structure Place the red knob on the fixing hub position and push on knob Tighten the screws inside until firmly blocked Do not over tighten the screw doing so could cause irreparable damages to the module Screw only until it feels tight and then just give an extra half turn Before use check that the knob is firmly attached and is moving correctly to each position
12. ised centre we have to underline that a report regarding all operations carried out must be requested This will permit both Spencer Italia S r l and the end user to keep a log book regarding the operations carried out on the device The device if used as indicated in the following instruction manual has an average life span of 5 years The life span can be expanded only following a general revision of the product that must be carried out by the Manufacturer or by a centre authorised by the Manufacturer Spencer Italia S r l will accept no responsibility for the incorrect functioning and or damage caused by the use of any device which has not been repaired or certified on expiry date by the Manufacturer or by one of the Manufacturer s Authorised Service centres making void the guarantee and the conformity to the Medical Devices Directive 93 42 CEE 6 ACCESSORIES AND SPARE PARTS 6 1 Accessories OX07006A Cylindrical tube holder 7 M 1 4 G OX10104B Non toxic oxygen tube 12 7 x 6 7 OX10109B Non toxic tube for medical gas 12 7 x 6 7 The tube for medical gas may be supplied only on specific request with the ends already terminated with threaded connection Before ordering please make a specific request for the required length and connections 6 2 Spare parts OX05014B Deviator label for caps of Pop only for Pop models OX07031B Red regulation knob ATTACHMENT A TRAINING REGISTER A The product must be used by trained pers
13. isk of cross infection due to presence of body fluids and or residuals The operator must always wear adequate personal protection such as gloves and mask etc during all checking and cleaning procedures The exposed metal parts are usually treated and or painted in order to increase their resistance The board has been made out of incontaminable material in order to increase hygiene and easy cleaning Clean the exposed parts with water and delicate soap then dry with a soft cloth In order to obtain a shine effect it is possible to use car waxes and creams Do not clean with high pressure water this will damage the joints and the lubricated parts If the stretcher is not cleaned regularly this may cause risks in terms of cross contamination We recommend the use of the polishing detergent Spencer STX 99 E Rinse thoroughly with warm water making sure that you have removed all traces of detergent which could degrade or compromise the integrity and durability of the device The use of high pressure water should be avoided Water penetrates the joints and removes the oil creating the risk of corrosion of components Allow to dry thoroughly before storing Drying after washing or after use in wet environments must be natural and not forced do not use flames or other sources of direct heat 5 2 Maintenance 5 2 1 Precautionary maintenance The person who carries out the precautionary maintenance of the appliance user in per
14. onnel only having attended specific training for this device and not for similar products Training date Training method user s manual during service former class etc Operator s name Trainer Basic training Advanced training ATTACHMENT B MAINTENANCE REGISTER Ty Keep this document at least 10 years from the end of life of the device Perform the required maintenance and to respect the life span of the device as indicated by the Manufacturer in the User s Manual Code and description of the device Purchase date Lot LOT or serial number SN Bought by PERSON IN CHARGE OF SERVICE RESULT Operator Authorized centre KIND OF SERVICE Maintenance OPERATIONS MADE ON THE check DEVICE extension of life span SERVICE DATE Warning The information contained in this document could be modified without any warning and is not to be intended as a commitment on behalf of Spencer Italia S r l Spencer products are exported to many countries and the same identical regulations are not always valid For this reason there could be differences between the description here described and the product actually delivered Spencer continually strives to reach the perfection of all items sold We therefore hope you will understand if we reserve the right at any time to modify the shape equipment lay out or technical aspects that are herein described Copyright Spencer Italia S r l All righ
15. son Manufacturer supplier or a third party has to guarantee the following basic requirements e Technical knowledge of the appliance and of the periodic maintenance procedures as described in these instructions e Specific qualifications and training in the maintenance operations of the appliance in question e The use of components replacement parts accessories that are either original or approved by the supplier in such a way that each operation causes no alteration or modification to the appliance e Possession of the checklist of operations carried out on the appliance e Guarantee complete adherence to the instructions of the Directive 93 42 CEE which includes also the obligation towards the Manufacturer to maintain post sales records and traceability of the appliance if requested During all checking maintenance and cleaning procedures the operator must wear adequate personal protection such as gloves mask glasses etc Checks to be carried out before and after each use and at least every month are as follows e General functionality of the device Cleanliness of the device remember that the failure of cleaning may cause the risk of cross infections Absence of cuts holes tears on the structure Correct fixation of all nuts bolts and screws Integrity of components The inspection frequency is determined by factors such as legal requirements the type of use frequency of use environmental conditions during use and storage Ple
16. ts and the users o any medical device As a Distributor or End Users of products manufactured and or marketed by Spencer Italia S r l you are strictly required to have a basic knowledge of any legal requirements applying to the devices contained in this supply that are in power in the goods final destination Country including laws and norms regarding technical specifications and or safety requirements and therefore you are also strictly required to have the necessary knowledge to guarantee all aspects regarding the total conformity of the products to the regulations in the relevant territory Promptly notify Spencer Italia S r l regarding any revisions to be made by Manufacturer in order to guarantee the conformity of the product to the territory s legal specifications including those resulting from rules and or norms of other nature Act with all due care and diligence and contribute to ensure conformity to general safety requirements of all devices marketed in the territory by providing final users with all necessary information for carrying out periodical checks on their devices as specified in the relevant User Manual Actively contribute to product safety checks on products sold by communicating any relevant risk analysis information both to the Manufacturer and to any competent authorities so that the necessary action can be promptly taken You are aware that in the event of any failure to conform to the above mentioned requirements you w
17. ts reserved No part of this document can be photocopied reproduced or translated into another language without the written approval of Spencer Italia S r l 8
18. warnings See instructions for use Ai Lot number Product code C E The product is compliant with the specifications of the Directive 93 42 CEE 1 4 Servicing request For any information regarding the correct interpretation of the instruction manual the use maintenance installation and restore of the product please contact the Spencer Customer Care Service tel 0039 0521 541111 fax 0039 0521 541222 e mail service spencer it or write to Spencer Italia S r l Strada Cavi 7 43044 Collecchio Parma ITALY In order to facilitate the assistance service please always indicate the lot number LOT shown on the label applied on the box or on the device 1 5 Demolition When the devices are no more suitable for being used if they haven t been contaminated by any particular agents they can be disposed of as normal solid waste otherwise follow the current regulations about demolition 1 6 Labelling Each device has got an identifying label positioned on the device itself and or on the box This label includes information about the manufacturer the product the CE mark the lot number LOT It must never be removed or covered 2 1 General warnings The product must be used by trained personnel only having attended specific training for this device and not for similar products e Training routines must be registered on a special register in which the names of those trained of the trainers date and place are indicated This
Download Pdf Manuals
Related Search