Home

GATE - LITE USER MANUAL

1. 5 back_reg File name Track Date Time Car Dri Lap Laptime Note 0 Get Mugello 23 08 2007 12 25 woo 00 08 211 Demo la 01 17 290 0 tracklib VI E Immagini 01 15 907 H lavoro amp 3 01 15 466 Ee Musica Ea 011 15 454 B My Games E 01 15 455 My PSPS Files SELECTED LAPS ni OLANTA j nero 2 HE 00 17 711 Nerovision 5 Presentazioni Corel telefono Ulead Burn Now Menu Avvio Preferiti Lapo oo 08 211 M W Ref Lap2 01 15 907 V Ref Magione 23 08 2007 12 25 Magione 23 08 2007 12 25 Remember that the times on the lap are influenced by the position of the finish line applied to the session in the case that one has official chronometric times and you wish to compare these properly with those provided by MX2 LITE it is necessary select a track with a finish line as close as possible to that actually used by the track transponder The same consideration prevails obviously even during the use of the MD60LOG unit the lap time visualised by the unit in this case as well depends upon the position of the finish line of the track used The check in the Ref check box indicates the reference lap for the data analysis this property enables the display of the Diff Time and Diff Distance channels see chap 9 2 9 2 Channel Bar Button Visualisation of the channels After having added the laps to analyse it is necessary to select the channels to be displayed in the analysis
2. User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved m Z G U I 9 3 6 Segments Setting The final control item in the previous selection indicated as Segments enables the definition of the sectors that will be visualised in the lower bar of the analysis window These are used to divide the track into distinct parts which may be visualised in the linear map of the MX2 LITE analysis window The positioning of the segments comes about in the same manner seen before for the finish line and the split points For the segments however it is necessary to specify additional information such as a name and a type After having entered all of the lines that delimit the segments click on the Left Curve usually red in colour or Right Curve usually green in colour then click on the corresponding portions of the track to assign the types NOTE The left and right curves are conventionally defined as such based on the direction of travel on the track Manage track library Available tracks Adina Tale RIGHT CURVE AND LEFT i ane CURVE BUTTONS Alcaraz Assen ere Pomposa Barcellona Jesolo Port Giorgio Binetto Ledenon Rijeka Brasilia Lombardore Silverstone Brno Magione Siracusa Calafat Magny Cours Valencia Cartagena Malagrotta Vallelunga Castelletto Misano Yarana Cellole Montagnana E storil Monza FRANCIA Most Franciacorta Mugello GET TEST Nardo i Create ne
3. GATE LITE USER MANUAL By Athena Evolution User Manual GATE LITE software Rev 02 Copyright 2010 GET by Athena Evolution All rights reserved The contents of this document or any part of it may not be reproduced transferred distributed or memorised in any form whatsoever without the written permission of GET by Athena Evolution s r l GET reserves the right to modify the content of this manual without prior notice 1 SOFTWARE FUNCTIONS 5 2 PRELIMINARY OPERATIONS SOFTWARE INSTALLATION 5 2 1 System Requirements iss siionncctencdsinnmsenuevtisexsamsisdunchdtsusnentiiunenaidinsnwdisdsanbartesnuanisemotetadieatenisduseatiiuiawsieunneeins 5 22 MAS TAM AMIO I Progi aesmar rog aee pirate tarare raid ino ai iaia 5 23 USB DrverinstalatiON esaeraren nene oraria rai PONEN PE EE 8 3 OPFP RE S TART OUP EREE EA EEE EEE toi EE EEEE 9 3 1 SOFTWARE FUNCTIONS AND WARNINGS i 9 4 BOWNLOAD OF REPOR TO initial 10 4 1 OPENING A REPORT FILE FROM THE MD60LOG ii 11 5 DOWNLOAD OF SESSIONS RECORDED IN DATA LOGGER MODE 13 6 MX2 LITE SOFTWARE OPENING COMMAND ARRANGEMENT ccccccccccccssssssssseeeeeeeeeeeeeeeees 14 6 1 MX2 LITE Software Window i 15 Orti PAG StS ANC li rita iaia italica iii rega vi 16 62 SONA IU barrata 17 0S U0Pperi00 Dialer rai 17 bi NVO OND E e a E E roi 17 bo AIG OOS Meraca o Lala 18 66 Track win
4. e Verify that the Connection Status LED is green e Click on the DOWNLOAD DATA LOGGING Mi button and stand by for the end of the operation Data Logging e The session just downloaded will be saved in the PC you can disconnect your MD60LOG now a button and stand by for the visualisation of the following screen Click on the MX2 LITE MX2 project1 sxp File Analysis Track View Options Sa G 2 GK IU P di Gy ey F 9 PLEASE LOAD A SESSION Upload track library from Pc to MD60 LOG Download track library from MD60 LOG to Pc NO TRACK SELECTED User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved e Open the Browser Bar SI and search for the session just downloaded in the folder tree MX2 Lite OE a Fie Analysis Track view Options el x Fade Yor GA A A A Ys vs re F SSRI GARBER V8 O Browser Bar 2 LLI doc File name Track Date Time Car Dr Laptime aji download Magione 23 08 2007 12 25 00 08 211 El Get 01 17 290 Demo E MD6OLOG 01 15 907 4 20030101 01 15 466 20081001 01 15 434 20081006 01 15 455 d 20081022 dii d 20081027 I _ 20081028 00 17 711 do tracklib aia a wa Upload Track Library from PC to MD60LOG TA Download Track Library from MD60LOG to PC CONNECTION STATUS The sessions downloaded from MD60LOG will be archived in the following path C Documents and Settings User Name Do
5. 7 1 1 Update data folders command The Update Data Folder command enables the software to update the data folders list visualised in the Browser Bar This function may be necessary if the sessions sought are not visible perhaps after a shift of a file during their selection in the Browser Bar 7 1 2 Functions connected to printing of the sessions The MX2 LITE software enables the printing of everything that is displayed in the analysis window and in the track window at any moment Print functions are gathered in the File menu Clicking on the item Print Settings accesses the settings window here it is possible to select the elements to be printed and as necessary to specify a title to be entered in the upper part of the sheet Print Setup Print Configuration Analysis Tracks Select Title Font Title Preview B Load Logo e Vertical hadio A Load Client Logo OF Annulla 7 User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved In the Print Configuration tab it is possible to select a title that will be printed on each sheet printed In the subsequent tabs Track and Analyses instead it is possible to specify the elements to be printed and a subheading relative to each of the elements To add an element to be printed select it from the list on the left clicking on it with the left mouse button and pushing the gt gt button To eliminate it fr
6. 00 38 105 Lap 5 Best Sector 2 Time 00 28 866 Lap 3 Best Sector 3 Time 00 24 393 Lap 4 Lap 0 Top Speed 152 Lap time 01 45 834 Sector 1 time 00 39 073 Sector 2 time 00 29 470 Lap 1 Top Speed 152 Lap time 01 45 834 Sector 1 time 00 39 073 Sector 2 time 00 29 470 Session Statistics Lap 2 Top Speed 152 Lap time 01 45 834 Sector 1 time 00 39 073 Sector 2 time 00 29 470 Lap 3 Top Speed 152 Lap time 01 45 834 Sector 1 time 00 39 073 Sector 2 time 00 29 470 NOTE The opening procedure of the file may be simplified by simply double clicking on the report file icon Windows usually associates txt files to NOTEPAD automatically as the default program User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 5 DOWNLOAD OF SESSIONS RECORDED IN DATA LOGGER MODE p L e Pa TT The sessions realised in the DATA LOGGER mode of the MD60LOG may be downloaded only by way of the use of the GATE LITE software The sessions once downloaded enable the analysis of the trajectories and the speeds obtained during their recording To perform the download of the sessions saved inside of the MD60LOG to the PC proceed as follows a Make sure that the MD60LOG is turned on and connected to the PC with the USB cable e Startup the GATE LITE software and stand by for the start up screen to appear Download Download Data
7. window To do this it is necessary to open the channels window clicking on the button corresponding to the left hand navigation bar In the first start up the window is opened in a minimised form therefore it is necessary to expand it clicking on the arrow located in the upper right edge of the same window MX2 Lite project sxp File Analysis Track View Options Hy OH OA A GA dt d IK SO Fe F visible iv T fx Diff time Tx Diff Distance Ta Distance 6 a iv Channel EXPANSION BUTTON Channels Bar a NSAT n a se M fx Lap time E K Lap distance of y M1 a W N o j User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved Channels Bar 4 Channel a Downs Up Hertz w ACC 0 00 1000 1000 RAC N E e fue fre 2 fx pF istance __ pw a i TT e pei pe oo 6 fxe ma pr i 7 fe tap distance T T ect E The channels available for analysis are the following ACC Mathematical channel for the acceleration of the vehicle Diff Time Difference in time between the reference lap and any other lap loaded i Diff Distance Difference in distance between the reference lap and any other lap loaded i Distance Distance in metres driven during the session recorded NSAT Number of GPS satellites received by the
8. 99 d2 198 17 dd 19603 81 wi 0 05 v2 0 00 dv 0 05 TY w Show scales w Show tables I Showyhide reference cursor R PIA 19000 19200 19600 20200 20600 21000 21200 WARNING the GPS point based alignments make no sense on Diff Time and Diff Distance channels User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 7 2 3 Reset Alignments The last item in the contextual menu of the analysis window Reset Alignments enables all of the alignments introduced previously to be cancelled so as to bring all of the graphics back to their original positions 73 Track Menu NN The Track menu contains the following items m Z G U I e Session Analysis enables the visualisation with different colours of the GPS trajectories of the laps being analysed e Distance Measurement Tool enables linear measurements to be made in the Track Bar window e Zoom enlarges or reduces the maps displayed in the Track Bar e Library visualises the track library window Tracklib 7 3 1 Session Analysis Function Activating the Session Analysis function from the Track menu or pressing the button in the upper tool bar it is possible to enter into trajectory analysis mode By way of this function it is possible to compare the lap trajectories selected in the Browser Bar inside of the track window Track Bar in case only one lap has been selected then only one line will be vi
9. Car Dr Laptime EH download Magione 23 08 2007 12 25 00 08 21 01 17 290 o 2 S Demo i E MDBOLOG 01 15 907 i i gt 20030701 01 15 466 i fi 20081001 01 15 434 01 15 455 01 30 734 20091027 i LL tracklib so rl Syncronize MD60Log Track Library on Tt gt i e Syncronize PC Track Library CMNENI an imterf M Lod Interfac _NIVOULOg Interac CONNECTION STATUS Once the folder is selected from the tree structure in the control immediately on the right the sessions contained in it are listed Selecting a session in the control immediately on the right the laps available are listed while in the lower left part a preview of the track to which the session refers is displayed In the list containing the available lap list there are the corresponding time and any notes present for each item the lap number The fastest lap of the session selected is indicated in red NOTE only lap 0 will appear if a track has not been applied to the session to be analysed User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved CAUsersDocumenta Get Demosdemo sxd coe doc File name Track Date Time Car Dr Lap Laptime Hote E download tu Magione 23 09 2007 12 25 00 08 21 Ey Get Demo CHECKBOX LAP a Eh fr SELECTION 01 15 90 01 15 466 01 15 455 01 40 34 28 17 71 BEST SESSION LAP To visualise a lap in MX2 LITE it is nece
10. Evolution srl All rights reserved nn Pa TT If the message visible in the figure below appears click on the Run button m 0 Apri file Avviso di protezione D T Impossibile verificare l attendibilit dell autore Eseguire il software Nome 201003 6b GATELite_setup exe Autore Autore sconosciuto Tipo Applicazione Da C Documents and Settings walerioF Desktop ee Esegui Annus AYVISa sempre prima di aprire questo file Eseguire solo software proveniente da autori considerati attendibili x Il file non dispone di una firma digitale valida che ne verifichi l autore Come determinare quale software eseguire In the initial installation page click on Next i Setup GATE Lite Welcome to the GATE Lite Setup Wizard This will install GATE Lite on your computer It ig recommended that you close all other applications before continuing Click Next to continue or Cancel to esit Setup ie Setup GATE Lite Select Destination Location Where should GATE Lite be installed CJ Setup will install GATE Lite into the following folder To continue click Next Ifyou would like to select a different folder click Browse C Programmi GATE Lite Atleast 24 5 ME of free disk space ts required ces so User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved Afterwards it is poss
11. GET by Athena Evolution srl All rights reserved During the installation the files being copied are shown as well as a progress bar wait for the end of the procedure m Z G U I 2 3 USB Driver Installation At the end of the installation leaving the control Install USB drivers selected click on Finish The USB drivers necessary for the PC to dialogue with the GET receivers are installed At this point the software installation process is complete ie Setup GATE Lite Completing the GATE Lite Setup Wizard Setup has finished installing GATE Lite on your computer The application may be launched by selecting the installed icons Click Finish to exit Setup Install Ant drivers C Solve USB conflicts User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved nn Pa TT Start up of the software comes about by clicking on the program icon The GATE LITE start up screen is shown in the figure below Download Download i Data Logging Timing Report Mae Lite CONNECTION STATUS A 3 1 SOFTWARE FUNCTIONS AND WARNINGS Below the software functions and or its activity modes are listed E Reduces the GATE LITE software to an icon on the Windows application bar Closes the GATE LITE software Indicates the connection to the MD60LOG device to the PC the download button is enabled Indicates the disc
12. position and size are not reset to the default values of the program l K Channel Visible Seale color tosh bonne Lut Autoa Min Max Hertz I o fax Acc e ut 50 i00 fM 0 00 0 00 1000 gt e fi jorrtime O IRIS OT oso oso fion CIC b fo C M Joe stesa f1 WD je e E I i io e elfele LIETI ooo 05 12 99 1000 rift I JT loo lese sooo 9 2 5 Hertz Properties This column indicates the channel acquisition frequencies expressed in Hertz Hz for the interpolated channels ex Lap Time this is re sampled at 100 Hz to improve its graphic resolution 9 3 Track Library Track Library Management Button The track library contains the list of all of the tracks memorised inside of the PC Accessing it the user may work with these TO set finish lines intermediate time measurement points divide the route in segments and select the track to apply to the session in use To display the Track Library Management window click on the corresponding button in the navigation bar on the left SG Cad The Track Library Management window shows on its left side a graphic representation of the track with finish line and intermediate split points and segments if set See the following paragraphs for further information In the right hand side of the window there is instead the list of the tracks available and the buttons enabling the execution of some simple operatio
13. special indicator has been set up in the lower area of the MD60LOG INTERFACE The states that this may take on are Indicates the status of the unit connected the Track Library Downloading from the PC to the MD60LOGand the Track Library Downloading from the MD60LOG to the PC buttons are enabled Pa Indicates the status of the unit not connected the Upload Track Library from the PC to MD60LOG and the Download Track Library from MD60LOG to PC buttons are disabled 10 1 2 Track Updating from PC to MD6OLOG If one wishes to transfer the entire track library from the PC to the MD60LOG unit proceed as follows e Make sure that the MD60LOG is connected to the PC with the USB cable e Start up the GATE LITE software e Start up the MX2 LITE software e Verify that the device connection status warning light is green e Press the Upload Track Library from PC to MD60LOG RA and stand by for the completion of the synchronisation operation L_ e Attheendofthe operations unplug the USB cable and restart the MD60LOG User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 10 1 3 Track Downloading from MD6OLOG In case you have created one or more customised tracks custom with the MD60LOG unit these will not be available inside of the PC library It is necessary therefore to perform the transfer with the download tracks command this function makes the customised tracks available during the u
14. track are changed for example inserting segments or shifting the finish line it is important to press the save button so as to memorise the changes made di The saving of the new track does not implicate that the new settings will be used in the session being used To apply the changes to the sessions being used actually it is necessary to press the Apply button Create new Create copy Delete Map rotation deg l p This double passage enables the change of more than one track selecting them each time from the list on the right without having to for this reason change the track used by the sessions loaded in the MX2 LITE User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved m Z G U I 10 MX2 LITE MD60LOG INTERFACE AREA The area called MD60LOG INTERFACE enables one to e Download the tracks from the PC library to the MD60LOG unit Update Tracks e Download the tracks from the MD60LOG unit library to the PC Download Tracks e Monitor the connection status of the unit to the PC by way of the USB cable NOTE If the unit is not properly connected to the PC the synchronisation buttons for the tracks are disabled Upload track library from Pc to MD60 LOG BA Download track library from MD60 LOG to Pe CONNECTION STATUS a 10 1 1 Indication of the USB connection status To monitor the USB connection status from the unit to the PC a
15. which you are working available Use the Zoom backward button to return to the original size The track rotation function enables the application of a rotation of the selected track from 0 to 360 degrees to facilitate the work of insertion of the finish lines split points and segments nn Pa TT Create new Create copy Delete Map rotation deg i O ae 9 3 8 Lap Selection Buttons The Arrow left and right buttons found in the upper tool bar enable one to select on which lap to work of the selection used this is useful in the creation of a new track phase to execute the operations described above in the best track acquired 4 gt There is therefore the possibility of creating a track directly from a recorded session this option is available when the software is given the command to create a new track during the loading of a session which turns out to not be divided into laps see chapter relative to the use of the Browser Bar Once the finish line has been set FL the software divides the session in laps and enables its running using the buttons mentioned above This option enables the track that is best adapted to the needs of the user to be visualised it is possible in fact to carry out all of the operations for the definition of split points and segments working on finished laps and not on laps with entry and exit to and from the pits 9 3 9 Track Saving When the settings for a
16. Lagging Timing Report Mx Lite CONNECTION STATUS M e Verify that the Connection Status LED is green amp e Click on the DOWNLOAD DATA LOGGING button and stand by for the end of the operation Download Data Logging e Thesession just downloaded will be saved in the PC in the following path C Documents and Settings User Name Documents Get MD60LOG session date file name sxd Where User Name stands for the name of the Windows user session date stands for the name of the folder in which the downloaded file is saved equivalent to the session recording date file name sxd is the name of the session file with the sxd extension The name of the file contains the date and time of the start of the session downloaded ATTENTION AFTER DOWNLOADING THE SESSIONS THE INTERNAL MEMORY OF THE MD60LOG WILL BE DELETED When download has finished you can disconnect your MD60 from the PC User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 6 MX2 LITE SOFTWARE OPENING COMMAND ARRANGEMENT The MX2 LITE software enables the user to analyse and compare sessions realised with the MD60LOG unit To start up the program proceed as follows m Z G U I e Start up the GATE LITE software and stand by for the start up screen to appear Download Download Mx Lite Data Logging Timing Report CONNECTION STATUS em e Clickon the MX2 LITE bu
17. Library from PC to MD60LOG H Download Track Library from MD60LOG to PC CONNECTION STATUS User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved mm Z G U I t Press the Download Track Library from PC to MD60LOG and stand by for the completion of the synchronisation operation if you want to transfer the track library from the PC to the MD60LOG At the end of the operations unplug the USB cable and restart the MD60LOG 4 Press the Download Track Library from PC to MD60LOG and stand by for the completion of the synchronisation operation if you want to transfer the track library from the PC to the MD60LOG If custom tracks are identified in the unit the software will save them in the PC asking the user to enter its name NOTE the tracks downloaded as indicated above do not provide the preview in the MX2 LITE track manager Track Lib until they are associated with a valid session recorded in that track after this operation the preview will be available permanently User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved NOTE NOTES T D l Z Lu User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved Athena Evolution s r l Via delle Albere 8 36045 Alonte VI Italy
18. R e to GPS position di alignments SHOW HIDE RIFERENCE CURSOR User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved After having activated the reference cursor in the upper part of the analysis window an additional bar appears In this bar the data for time distance channel values selected in the values table and difference delta for the two cursors I Ce nl CHANNEL TIME CURSOR POSITION CURSOR CHANNEL VALUES ON O POSITION DISTANCE REFERENCE CURSOR Z CHANNEL VALUES ON POSITION CURSOR A ST f PA FE F j SIM ABSOLUTE DELTA ISPOG t1 04 15 74 04 24 41 de 00 08 67 d1 5151 17 d2 95403 72 dd 252 55 w1 1 we s dvd DELTA DISTANCES TIME REFERENCE REFERENCE CURSOR CURSOR TIME DELTA DISTANCE 7 2 2 Align with GPS position If several laps are being compared and it becomes necessary to align the graphs to a precise GPS coordinate it is possible to use the Align with GPS position function Once the cursor is displayed in the window shift the cursor to the point desired therefore open the contextual menu in the analysis window clicking on the right key in the channel graph area and select the item Align with GPS position In this way all of the laps will be aligned with the GPS point indicated by the Cursor MX2 Lite project sxp File Analysis Track View Options Z RR ife ADDA Acc t1 15 02 23 t2 03 06 01 dt 11 56 22 d1 19801
19. SEWN G essene a agi ra 36 9 3 7 Rotation and zoom of the selected track 37 93 8 LAP CISC OM BUNONS se acces taster Se ON E TR a Roger 37 90 95 WAG aI Gana et 37 10 MX2LITE MD60LOG INTERFACE AREA iii 38 10 1 1Indication of the USB connection status ii 38 10 1 2Track Updating from PC to MD60LOG i 38 10 1 3Track Downloading from MD60LOG ii 39 APPENDIX 1 QUICK GUIDE FOR USE OF THE MD60LOG WITH A PC 40 1 DOWNLOAD AND OPEN SESSIONS RECORDED IN DATA LOGGING i 40 2 DOWNLOADING AND OPENING REPORTS FROM THE MD60LOG i 43 3 UPDATING THE TRACKUBRARY aller bia oa 45 User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved nn Pa TT Dear Customer Thank you for having chosen a product from the DATA ACQUISITION AND ANALYSIS SYSTEMS line from GET by Athena Evolution Certain that our passion and experience will be able to assist you in successfully expressing yourself in any competition in which you may wish to participate we invite you to read this manual certain that it will assist you in the use of your new GET by Athena Evolution device mm Z G U I User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved SOFTWARE FUNCTIONS The GATE LITE software enables sessions memorised by the MD60LOG device to be downloaded and
20. analysed by a PC in the DATA LOGGER mode The GATE LITE software is supplied with a data download kit for the MD60LOG The connection between the device and the personal computer must be established by way of the USB mini USB cable supplied in the aforementioned kit The software also enables reports to be downloaded from and to synchronise the track library runs on the MD60LOG Athena Evolution declines any and all responsibility for damages derived from improper use of the GATE LITE software 2 PRELIMINARY OPERATIONS SOFTWARE INSTALLATION To use the GATE LITE software it is necessary to perform its installation PERFORM THE INSTALLATION WITHOUT CONNECTING THE MD60LOG DEVICE TO THE USB PORT ON THE PC AS THIS COULD CAUSE CONFLICTS WITH OTHER PERIPHERALS INSTALLED ON YOUR COMPUTER 2 1 System Requirements To install GATE LITE in a personal computer make sure that the requirements found in the table below are respected prim Ram 2 2 Installation Program Before installing GATE LITE make sure that no GET device has been connected to it including any Ant key to the USB of your PC To install GATE LITE software execute the file GATELITE setup exe with a user who has Administrator privileges on the computer double clicking on the set up icon the guided procedure will Start up GATELITE_setup exe Tite GATE Setup les GETDATA User Manual GATE LITE rev 02 Copyright 2010 GET by Athena
21. cesso ai programmi Pe Microsoft Office POJ Rubrica produttivit b amp Sincronizza Windows Update oT mj multimedia verifica guidata compatibilit programmi Tn Comunicazioni Ls Windows Movie Maker Dati recenti 3 2 Acquisizione guidata immagini F s ap Connessione desktop remoto Impostazioni iat Comunicazioni dl 4 P Cerca j P Guida in linea e supporto tecnico 357 Esegui Windows XP Professional i e Once started the NOTEPAD screen will be the following Senza nome Blocco note le Modifica Formato Visualizza User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved e Click on the File menu in the upper left and on the item Open search for the file previously downloaded and click on the command Open f Senza nome Blocco note m Z G U I Documenti E test_assen txt recenti Desktop Documenti Risorse del computer ei _ _l b ili I IIPI x a Nome file test_assen tut Risorse direte Tipofie Documenti di testo txt Codifica ANSI e The figure below illustrates an example of a report provided by the instrument Session Number Session 3 Date DD MM YYYY Time HH MM SS aps 8 Best Lap Time 01 31 385 Lap 4 Session Top Speed 165 Lap 4 Session Date Time Session Statistics ldeal Lap Time 01 31 826 Best Sector 1 Time
22. cuments Get MD60LOG session date name file sxd Where User Name stands for the name of the Windows user Session date stands for the name of the folder in which the downloaded file is saved equivalent to the session recording date in numeric format year month day file name sxd is the name of the session file with extension sxd The name of the file contains the date and time of the start of the session downloaded For example if the session was recorded on March 15 2010 at 10 30 it will be archived as C Documents and Settings User Name Documents Get MD60LOG 20100315 15 03 2010 10 30 sxd e Select the session desired among those that appear under the File name column e Apply the track or create one at the chosen lap by way of the track selection window to obtain the division of the laps if necessary TRACK SELECTED OK BUTTON CREATE NEW TRACK BUTTON Select track Current loaded track Mugello demo Current data file case User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved NOTE only lap 0 will appear as long as a track has not been applied to the session to be analysed Once this operation has been executed the division of the laps will be undertaken this division will be memorised and made available in later accesses to the same session Remember that the times on the lap are influenced by the position of the finish line appl
23. device during the session recorded SPEED GPS speed measured during the session recorded Lap Time Time of the lap selected Lap Distance Distance in metres driven during the lap being analysed For the listed channels certain functions or properties are available described in the following paragraphs ordered in columns Visible If selected visualises the corresponding channel graph Scale Visualises the name and numbers of the channel scale on the Y axis Colour Modifies the colour of the channel graph Lock Locks the graph display scale Auto Activates the graph auto scale function Min Max Indicate the minimum and maximum values achieved by the corresponding channel Hertz Indicates the corresponding channel acquisition frequency 9 2 1 Visible Properties Selecting or deselecting the Visible check box it is possible to show or hide the channel in the area of the graphics in the MX2 LITE software 9 2 2 Scale Function Selecting or deselecting the Scale check box it is possible to show or hide the name and the values of the scale of the channel on the Y axis in the area of the graphics in the MX2 LITE software 9 2 3 Colour Properties Clicking on the Colour property check box in the desired channel it is possible to modify the colour of the graphs displayed by the MX2 LITE software This math channel must be used during data analysis only with X axis set on Distance This math channel must be used during data analy
24. dow track Bal ariani aiar pain 18 7 MAZ EITE MnD I ense Ne nie 20 7 IMG 20 7 1 1 Update data folders command 20 7 1 2 Functions connected to printing of the SESSIONS 20 7 2 Analysis Menu ui 22 7 2 1 Show Hide Second Cursor 22 7 2 2 Align With GPS DOSIION sicccs2 cecascescnns cotanta errante Soares iiini iaar n aada iiianoe 23 1 29 MISSELAIGNMEN Sienalibri reni 24 LS OK NO e e oo 24 Tal SESSION SS UNG HOM ssenari Ee aan A ER poni 24 7 3 2 Distance Measurement Tool a rcocorsiinena iii iran riavere iaia 24 To L OO Fr nr 25 TA E e E A E A litro lenire 25 To ODS Me eoep A ee ae E 25 8 MX2 LITE UPPER TOOL BAR erreia ssr iieiea EA aaan a N EEEE Se a NASE EEEE A EnA ETEA aen AniS 27 9 MX2 LITE INAVIGATONIBAR iii pedone eletto 28 Oli BOWSER Bal OMe nilo aiar 28 9 2 Channel Bar Button Visualisation of the ChTanNeEls 30 eel VADE PODENI SR lario vieni 31 22 delie 31 D228 COlOU PO Be eS a E E E EEE TE E ONAN E N 31 9 24 ScaleaNd LOCK FUANGHONS tiara le palate lie 32 SPAS ACI OOS EE N EA EE A E E E E E EOE A E E A 32 9 3 Track Library Track Library Management Button 32 93 Track Seleclon eccirni a E ee ee 33 9 3 2 Application of the track to the loaded SESSION 33 9 3 3 Create delete and copy trackS 33 9 3 4 Setting the Finish LIN i 34 9 3 0 Split POINTS SENG ricarica deretano 35 9 3 6 Segmen
25. e is the possibility that not all of the laps will be divided nor too long in which case the lap may be intersected in more than one point If the finish line has already been placed and one wishes to change its position slightly instead position the mouse pointer on the corresponding line and drag its end until achieving the position desired Manage track library Ed me el S elope gt Available tracks Adria Alhacet TRACK ZOOM BUTTONS Albetto Alcaraz Assen ere Paul Alcano Barcellona Jesolo Pomposa Binetto Ledenon Port Giorgio Brasilia Emo FINISH LINE FL Calata artagens Tal ruta ole il Castelletto Misana Vallelunga Cellole Montagnana Varano E storil Monza FRANCIA Most Franciacorta Mugello GET TEST Mardo Create new Create copy Delete Map rotation deg p w _ User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved To eliminate a finish line make sure that the item Finish Line is selected in the upper left drop down menu then press the Eraser button Manage track library A ma i eae I L l Z T Available tracks dia ERASER BUTTON Albacete Albettone Alcaraz Interlagos Pannonia Assen Jerez Paul Ricard Barcellona Jesolo Pomposa Binetto Ledenon Port Giorgio Brazilia Lombardore Rijeka Brno Magione Silverstone Calafat Magny Cours Siracusa Cartagena Malagrotta Valencia Castel
26. e track window Track Bar if previously on this there had been applied the zoom Activates the linear measurement tool Ruler applicable to the Trackbar as described in chap 7 3 2 in this manual Visualises the option window in the MX2 LITE illustrated in chap 7 5 in this manual User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved L e Pa TT m Z G U I 9 MX2 LITE NAVIGATION BAR 9 1 Browser Bar Button To perform the analysis of the sessions downloaded it is necessary to load them into the software To select a session among those available it is necessary to open the Browser Bar from the left navigation bar The window provides in the left hand part a structure representing the folder tree on the hard disk of the computer As a default setting the sessions are downloaded from the devices into the Documents Get folder of the Windows user in use creating a folder with the name of the device from which the data is downloaded MD60LOG and a subfolder with the date in which these were created In the Browser Bar the main folder holding the different sessions in the example given below it is GET it is selected automatically in such a manner as to speed up the selection operation MX2 Lite File Analysis Track view Options w O OH A A 2 C8 GG CG VA S t 7 FR GE di dr VOTA 18 E de doc File name Track Date Time
27. eference cursor Align with GPS position Performs the alignment of the graphs by GPS coordinates useful for comparison of several laps e Reset Alignments deactivates GPS point alignments Given that some menu commands are extremely intuitive the next chapters will only describe the items Show Hide Reference Cursor and Align with GPS position 7 2 1 Show Hide Second Cursor The reference cursor is an additional cursor that is used as reference for the visualisation of data between two cursors The reference cursor is represented by a red vertical line and may be activated in three different ways e Press the shift command on the keyboard and click on any point of the analysis window Press the R key on the keyboard the reference cursor will appear in the position of the mouse pointer Press the R key on the keyboard again the reference cursor will be hidden e In the context specific menu in the analysis window select the item Show Hide Second Cursor Repeating the operation the reference cursor is hidden To move the reference cursor all of the methods identified are good for the main cursor but in addition it is necessary to hold down the shift key on the keyboard a OPTI x File Analysis Track view Options EX Y R R RAZR RRF R Acc t1 15 13 52 t2 15 01 71 dt 00 11 81 d1 20159 51 d2 19771 99 dd 387 52 w1 0 58 G v2 0 31 GEIM IEAS k 4 REFERENCE CURSOR POSITION v Show tables CURSO
28. efore it is not possible to visualise the entire downloaded session It is nevertheless possible to perform the comparison of several laps by overlapping the graphs User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 6 2 Software menu bar The MX2 LITE software menu bar is in the upper part of the software window MX2 Lite File Analysis Track View Options 6 3 Upper tool bar The main tool bar is located in the upper part of the program window and enables rapid access of the most used functions of the software The tool bar is made up as follows A Selection of the display scale of the x axis time or distance B Analysis window zoom in C Analysis window zoom out D Re set zoom on selected lap E Zoom of the selected area or report on the maximum and minimum values of the channels in the selected area F Set lap trajectory comparison mode trajectory analysis mode G Enlarge the track loaded in the project H Reduces the track loaded in the project I Reset zoom on the track L Ruler tool useful for making measurements in the track window M Options window useful for configuring the MX2 LITE options 6 4 Navigation bar The navigation bar is located by default in the left hand side of the program window The navigation bar is made up as follows A Visualisation browser window B Visualisation channels window C Visualisa
29. eric field that shows the value relative to the position of the cursor in the selected channel e Show lap times to visualise the time of each lap along the finish line e Show split times to visualise the vertical lines drawn in the analysis window that identify the position of the intermediate times e Unlock Chrono Bar enables the modification of the position and the dimensions of the MD60LOG Interface window e Unlock Track Bar enables the modification of the position and the dimensions of the Track Bar window e Select Language enables the setting of the language for the software menus Currently the supported languages are Italian and English m Z G U I The second tab Colours and characters enable the setting of the colours and characters in the MX2 LITE software Analysis options Colors and fonts Scale font Table font Hap font Setup font Background color Foreground color Grid color Finish line color Color manager OF Annulla User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 8 MX2 LITE UPPER TOOL BAR The upper tool bar enables quick access to many of the functions dealt with in the previous chapters Later the functions associated with the buttons will be briefly listed nf x Change the X axis scale it is possible to choose between Time and Distance If Time is set it will be easier to evaluate
30. erved If in the analysis window the reference cursor is activated this is visualised in the track window as a red cross SPEED lies ean V l File Analysis Track View Options Lu 4 by Y 5 x 7 OB Y ZA G GR GE j TR Acc t1 15 27 73 t2 15 00 75 dt 00 26 98 d1 20626 99 d2 19717 00 dd 909 99 v1 0 47 G v2 0 31 GS IMA ALES Ba Ace ANALYSIS CURSOR REFERENCE CURSOR 19000 i 19900 19600 19 20200 20600 20800 21200 Distance Upload track library from Pc to MD60LOG Download track library from MD60LOG to Pc CONNECTION STATUS If finish lines and split points intermediate times have been added to the track these will be displayed in the Track Bar under the form of grey lines that cut the track INTERMEDIATE TIMES hid eae EE SPT User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved m Z G U I 7 MX2 LITE Menu Bar The functions available in the MX2 LITE menu bar will be dealt with in the following chapters 7 1 Menu File GR The File menu contains the following items e Update Data Folder performs the update of the data folders visualised in the Browser Bar e Print prints the loaded sessions e Print Settings enables the choice of the print settings for the data loaded into the MX2 LITE software program e Print Preview Performs the preview of the sessions to be printed e Quit quits the MX2 LITE analysis software
31. from Pc to MD60 LOG CONNECTION STATUS Download track library from MD60 LOG to Pc CIRCUIT MAP In the event that a single lap is being analysed each channel is represented with a different coloured graph If this is not the case that is analysing more than one lap at the same time the graphs are represented with the colours of the corresponding laps The analysis window is furthermore made up of the following elements e Y Axis carries the scale and the name of each channel visualised using the same colour of the graph e X Axis carries the time scale or the distance according to the setting e Circuit map or Trackbar may be viewed in the lower part of the analysis window under the x scale If segments have been associated to the session track the circuit map will visualise the sequence of those segments relative to the zone displayed in the analysis window Each segment is displayed with the corresponding colour and name e Intermediate times these are represented by broken vertical white lines They are displayed only if the track in use contains split points intermediate time points and only if they have been enabled in the options window of the program e Analysis cursor allow to analyse the channels value in a desired point of graphics e Table of channel value show the channels value at the analysis cursor position It would be well to remember that the MX2 LITE software limits the display to the laps selected ther
32. hed at the end of the operation the user will be asked to enter the name and path for where the file just downloaded is to be saved Salva con nome Salva In 4 Risorse del computer d fe amp H Floppy da 3 5 pollici 41 Me Ss Disco locale C Documenti Se DATA DSK Ds RIE Sunita DYD Es gt Unit DVD RAM F i S password su Server Athena Evolution Server ael 2 Desktop Documenti Risorse del computer meri Risorse di rete Home file report nd Sala come Report file txt Annulla User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 4 1 OPENING A REPORT FILE FROM THE MD60L0G Opening a report file from the MD60LOG may be performed with any text editor program In this manual the procedure to follow is described with the NOTEPAD program from Windows usually included in all Microsoft operating systems Start up NOTEPAD pressing Start Programs Accessories NOTEPAD nn Pa TT an Accesso Facilitato b im Esecuzione automatica H Mm Svago d IA Giochi t F Utilit di sistema e Assistenza remota Blocco note Wi MSN Explorer 2 Calcolatrice fa Outlook Express C Esplora Risorse Windows Media Player bo Y Faint 8 Windows Messenger i i i a Catalogo di Windows 3 g t Presentazione di Windows XP Strumenti di amministrazione fc Prompt dei comandi amp Impostazioni ac
33. ible to select a name for the folder that will appear in the Start menu of Windows Proceed by clicking on Next ie Setup GATE Lite Select Start Henu Folder Where should Setup place the program s shortcuts nn TT Setup will create the program s shortcuts in the following Start Menu folder To continue click Nest IF you would like to select a different folder click Browse Browse Select in what point to position the connection icons for the GATE LITE software Proceed by clicking on Next ie Setup GATE Lite Select Additional Tasks Which additional tasks should be performed Select the additional tasks you would like Setup to perform while installing GATE Lite then click Next Additional icons Create a desktop icon The overview screen below shows all of the choices made up to this moment it is possible to return to the previous pages to make any needed changes clicking on the Back button To proceed with the installation click on Install ie Setup GATE Lite Ready to Install Setup is now ready to begin installing GATE Lite on your computer Click Install to continue with the installation or click Back if you want to review or change any settings Destination location CA Programmi GATE Lite Start Menu folder GATE Lite Additional tasks Additional icons Create a desktop icon User Manual GATE LITE rev 02 Copyright 2010
34. ied to the session in the case that one has official chronometric times and you wish to compare these properly with those provided by MX2 LITE it is necessary select a track with a finish line as close as possible to that actually used by the circuit transponder The same consideration prevails obviously even during the use of the MD60LOG unit the lap time visualised by the unit in this case as well depends upon the position of the finish line of the track used m Z G V I e The channels acquired are now available in the software MX2 LITE analysis area x File Analysis Track view Options Er X 7 d OK ZIP BS ye G 5 19 ANALYSIS TABLE OF CURSOR CHANNELS VALUE INTERMEDIATE 24400 Distance Upload track library from Pc to MD60 LOG Download track library from MD60 LOG to Pc CIRCUIT MAP CONNECTION STATUS e Itis possible to display or hide the acquired channels by opening the Channel Bar in MX2 LITE User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 2 DOWNLOADING AND OPENING REPORTS FROM THE nn Pa TT To perform the download of the reports saved inside of the MD60LOG to the PC proceed as follows e Make sure that the MD60LOG is turned on and connected to the PC with the USB cable Start up the GATE LITE software Make sure that the device connection status warning light is green O Oo p Dow
35. ime 00 28 866 Lap 3 Best Sector 3 Time 00 24 393 Lap 4 Session Statistics Top Speed 152 Lap time 01 45 834 Sector 1 time 00 39 073 Sector 2 time 00 29 470 Lap 1 Top Speed 152 Lap time 01 45 834 Sector 1 time 00 39 073 Sector 2 time 00 29 470 Session Statistics Lap 2 Top Speed 152 Lap time 01 45 834 Sector 1 time 00 39 073 Sector 2 time 00 29 470 Lap 3 Top Speed 152 Lap time 01 45 834 Sector 1 time 00 39 073 Sector 2 time 00 29 470 User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 3 UPDATING THE TRACK LIBRARY I L _l Z Lu To carry out the updating of the Track Library proceed as follows e Make sure that the MD60LOG is turned on and connected to the PC with the USB cable e Startup the GATE LITE software and stand by for the start up screen to appear Download Download Data Logging Timing Report 4 Lita CONNECTION STATUS 4 i a i button and stand by for the visualisation of the following screen MX2 Lite ER a x Fie Analysis Track View Options tr O O J 5 4 di A A S t itri F Pa F Fx a 5 TY e Click on the MX2 LITE amp BY Upload Track Library from PC to MD60LOG Download Track Library from MD60LOG to PC CONNECTION STATUS e Verify that the device connection status warning light gt is green CA Upload Track
36. letto Misano Vallelunga Cellole kontagnana Varano Estoril Monza HAM LA O CANCELLED FINISH LINE FL l Create new Create copy Delete Map rotation deg L w zal 9 3 5 Split Points Setting To place the lines where intermediate times are measured select the item Split from 1 to 4 in the upper left drop down menu in the Track Library Management window then proceed to entering the corresponding lines just as in the previous paragraph To add split points it is necessary to respect the order from 1 to 4 following the travel direction on the track It is not necessary to add all of the split points Make sure that the split points entered intersect the track otherwise the intermediate times cannot be calculated properly Manage track library El Gi sisi PPC iz Available tracks Adria GETI new_track Albacete Hungaro Nogaro Albettone Imola Ottobiano Alcaraz Interlagos Pannonia Assen Jerez Paul Ricard Barcellona Jesolo Pomposa Binetto Ledenon Port Giorgia Brazilia Lombardore Rijeka Brno Magione Silverstone Calafat Magny Cours Siracusa Cartagena Malagrotta Valencia Castelletto Misano Vallelunga Cellole Montagnana Varano Estoril Monza FRANCIA Mast Franciacorta Mugello GET TEST Nardo Create new Create copy Delete Map rotation deg ww To eliminate a split point select it in the menu high on the left then press the Eraser button as seen for erasing the Finish Line
37. nload Download Data Logging Timing Report MeZ Lite CONNECTION STATUS A e Click on the DOWNLOAD TIMING REPORT button gt Timing Report NOTE the DOWNLOAD TIMING REPORT button is enabled only if the CONNECTION STATUS warning light is green e Stand by until the report download process has finished at the end of the operation the user will be asked to enter the name and path for where the file just downloaded is to be saved Salva con nome Salva in og Risorse del computer E amp N SR Floppy da 3 5 pollici 4 3 Md amp Disco locale Ci Documenti Ss DATA DSK D pei LA Unit DVD E iz LB Unit DVD RAM F ni S password su Server Athena Evolution Server ae 2 5 Desktop Documenti a Risorse del computer Risorse di rete Nome file report r salva come Report file E txt Annulla User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved e The reports are downloaded in text format for their consultation it is possible to use any text editor such as Notepad or Microsoft Word The figure below illustrates an example of a report provided by the instrument Session Sesion mm Z G U I Session 3 Session Date Time Date DD MM YYYY Time HH MM SS Best Lap Time 01 31 385 Lap 4 Session Top Speed 165 Lap 4 Ideal Lap Time 01 31 826 Best Sector 1 Time 00 38 105 Lap 5 Best Sector 2 T
38. ns on these such as copy create or delete These operations as well are discussed in greater detail below User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved Manage track library Froni ti elele gt Available tracks Castelletto Cellole Estoril FRANCIA Franciacorta GET TEST GETI Hungara Imola Interlagos Jerez Jesolo Ledenon Lombardore Magione Magny Cours Malagrotta Misano Montagnana Monza Most Mugello Nardo new_track Nogaro Ottobiano Pannonia Paul Ricard Pomposa Port Giorgio Rijeka Silverstone Siracusa Valencia Vallelunga Varano Create new Create copy Delete w Map rotation deg 9 3 1 Track Selection The selection of the track desired is made by clicking once with the left hand mouse buiton on the relative name to be looked for in the Tracks Present list which is selected so that the corresponding image will be automatically displayed in the left hand part of the window Once a track is selected it is possible to work with it and save the changes without necessarily having to apply it to the session in use 9 3 2 Application of the track to the loaded session After having loaded one or more laps it may become necessary to change the default track so as to be able to use for example a track with a different layout of the finish line and points in which the intermediate times are measured To a
39. om the print list select it from the list on the right and push the lt lt button SUBHEADING FIELD nn Pa TT Print Setup x Print Setup Print Configuration Analysis Tracks Print Configurah Analysis Tracks Select Subtitle Select Subtitle Subtitle Font Change Font Subtitle Change Active Graphs Printed Graphs Active Tracks Printed Tracks Hain Main Corrent Track Corent Track 0K Annulla BUTTON TO ADD ELIMINATE ELEMENTS TO BE PRINTED Once the elements desired have been added press OK In this manner the print preview is automatically displayed To navigate among the print preview pages use the Next Page and Previous Page buttons found in the upper part of the window Press the Print button to print or the Close button to close the print preview Pit Next Pag Prev Pag E il Zoom In Zoom Out Close The print preview may also be reached with the Print Preview button in the File menu The Print item in the same menu calls up the Print window instead User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved m Z G U I 7 2 Analysis Menu The Analysis menu contains the following items Show Scales visualises hides the scales of the channels on the Y axis Show Tables visualises hides the channel values Show Hide Reference Cursor visualises hides the r
40. onnection of the MD60LOG device from the PC the download button is disabled e Executes the download of all of the sessions present on the device onto the path Drea C Document and Settings User name Documents Get MD60Log a At the end of the download the memory of the unit is cleared Carries out the download of the reports from the unit Download Timing Report Starts up the MX2 LITE analysis software i MX2 Lite an Closes the GATE LITE software User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 4 DOWNLOAD OF REPORTS m Z G U I The report downloaded from the MD60LOG is saved in a text format openable with Notepad Microsoft Word or any other text editor This contains data relative to lap times speed etc present in the unit s memory To perform the download of the reports saved inside of the MD60LOG to the PC proceed as follows o Make sure that the MD60LOG is turned on and connected to the PC with the USB cable Start up the GATE LITE software Make sure that the device connection status warning light is green 4 a B Download Download Data Logging Timing Report Maz Lite CONNECTION STATUS VU e Click on the DOWNLOAD TIMING REPORT button es NOTE the DOWNLOAD TIMING REPORT button is enabled only if the CONNECTION STATUS warning light is green Stand by until the report download process has finis
41. rajectories of the laps added to the project L Dv Pa TT 7 4 View Menu The View menu contains the following items Zoom Rectangle enables the enlargement of a particular area of the laps being analysed Zoom X in enables the enlargement of the area around the cursor Zoom X out enables the reduction of the area around the cursor Show all visualises the entire lap selected in the Track Bar Toolbar show hide the upper toolbar Explore Window opens the Browser Bar The options Enlarge Area Enlarge Reduce and Show all are available also in the upper tool bar of the MX2 LITE software 7 5 Options Menu The Options Menu contains the item Setup which enable the modification of the MX2 LITE software options Clicking on the item Setup the user can access the software customisation options the figure below illustrates the access window Analpeiz options Colors and fonts O Show cursor info Show lap times Show split times Unlock Chrono bar W Unlock track bar Language English User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved In the dialogue box there are 2 tabs the first Analysis Options permits the setting of the following controls e Show horizontal cursor visualises a horizontal line at the intersection point between the cursors and the graphs in the analysis window e Show Cursor Info visualises a num
42. se of the MX2 LITE analysis software Proceed as follows nn Pa TT e Make sure that the MD60LOG is connected to the PC with the USB cable e Startup the GATE LITE software e Start up the MX2 LITE software e Verify that the device connection status warning light is green e Press the Download Track Library from MD60LOG to PC amp and stand by for the completion of the operations if custom tracks are identified in the unit the software will save these in the PC asking the user to enter its name NOTE the tracks downloaded as indicated above do not provide the preview in the MX2 LITE track manager Track Lib until they are associated with a valid session recorded in that track after this operation the preview will be available permanently User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved m Z G U I APPENDIX 1 QUICK GUIDE FOR USE OF THE MD6OLOG WITH A PC This appendix is to be used as a quick guide for use of the MD60LOG with a PC For further information or to resolve any doubts refer to what is found in the DOWNLOAD AND OPEN SESSIONS RECORDED IN DATA LOGGING To access the analyses of the sessions realised in DATA LOGGING mode with the MD60LOG proceed as follows e Start up the GATE LITE software and stand by for the start up screen to appear Download Download Data Logging Timing Report Msz Lite CONNECTION STATUS 6
43. sis only with X axis set on Time User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved nn TT m Z G U I 9 2 4 Scale and Lock Functions Selecting the Auto control check box the software sees to automatically adjusting the vertical dimensions of the channel graph As a default option the auto scale is activated automatically at the moment in which a channel is set to visible The Lock function is instead used to lock the size and position of the graph Y axis on the values set in the Down and Up columns These values are set only when the channel lock has not been set and specify the vertical limits in percentiles of the positions that the graph assumes inside of the analysis window For example with a lower limit of 0 Down and an upper limit of 50 Up the graph will be displayed in the lower half of the analysis window while with a lower limit of 50 and an upper limit of 100 the graph will be displayed in the upper half of the window It is furthermore possible to display the graphs in the same area of the analysis window giving common values to the Down and Up columns setting for example 0 on all of the Down columns and 100 on all of the Up columns of the channels the graphs will then occupy all of the vertical space in the analysis window Once the display limits have been set it is important to perform the lock of the channel so that its
44. ssary to click on the corresponding check box in the Lap column The lap is added to the list present in the lower part of the browser bar In the same manner to eliminate a lap from MX2 LITE it is necessary to click again on the same check box so as to eliminate the check sign Once selected a lap may appear in the track selection window then the user is asked specify to which track the selected lap should be associated Once the track to be used has been selected it is enough to click on the OK button in the window It is also possible to click on the button Create New in the window to make a new track useful if the track is not present in the library In case that one does not wish to apply or create a new track for the lap selected the window can be closed simply by clicking the Close window button in the upper right corner CLOSE WINDOW BUTTON Select track x Current loaded track Mugello Current data file demo TRACK SELECTED OK BUTTON CREATE NEW TRACK BUTTON The list containing all of the selected laps summarises for each item the information regarding the same lap and the corresponding session so as to be able to quickly and precisely identify all of the laps to be identified User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved nn Pa TT m Z G U I Ci Docume nts and Settingsivale DocumentilGet Demoidemo sxd
45. ssign a new track to the session in use it is necessary to select it from the tracks list and then press the Apply button to apply the choice made Once the window is closed with the Close button all of the sessions open will use the new track Create new Create copy Delete Map rotation deg 9 3 3 Create delete and copy tracks Through the track library it is possible to perform certain operations on the listed tracks In case you would like to change the track in use without losing the original settings for example a new version of the track may be made by pressing the Create New button In this way a new track with the name new_track is created in the Tracks Present list This track will be a version without finish line split points or segments of the track applied to the laps loaded in the MX2 LITE In case you would like to create a copy of an existent track instead just select the and press the Create Copy button You will be asked to specify a name for the track Finally to delete a track just select it and press the Delete button The track will be deleted from the list and from the hard disk of the computer Create copy Delete eco _ cone Map rotation deg User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved ENGLISH m Z G U I 9 3 4 Setting the Finish Line So that a session can be divided into laps i
46. sualised When the function is not activated all of the trajectories of the laps loaded are displayed in white without distinction To properly visualise the differences among the laps it may be necessary to perform a zoom on the track window TRACK BAR WITH TRAJECTORY COMPARISON BETWEEN 2 LAPS 7 3 2 Distance Measurement Tool Be Ge The Distance Measurement tool Ruler which may also be activated by pressing the amp _ button on the main tool bar enables the distance between 2 points inside of the track window to be measured To use this tool click on the track window to set a starting point from which the measurements begin then holding the left mouse button down drag the pointer to the final point and release the button This operation produces a segment in white with indications of the distance in metres between the 2 ends POINT TO POINT MEASUREMENT IN METRES User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved To visualise an enlargement of a specific part of the track place the cursor near the point on which you wish to make the zoom It is possible to use the Zoom forward and the Zoom backward commands in the Track menu or the main tool bar buttons amp to enlarge or shrink the visualisation of the track inside of the window The zoom functions are particularly indicated during the trajectory analysis visualisation to identify the differences among the t
47. t is necessary that the track associated have a finish line defined To set a finish line on a previously selected track click on the first drop down menu in the upper part of the track library It is possible to select which element to add or change in the graph display of the track underneath in the drop down menu Avallable tracks Adria GET new track Albacete Hungaro Nogaro Albettone Imola Ottobiano Alcaraz Interlagos Pannonia Assen Jerez Paul Ricard Barcellona Jesolo Pomposa Binetto Ledenon Port Giorgio Brasilia Lombardore Rijeka Brno Magione Silverstone Calafat Magny Cours Siracusa Cartagena Malagrotta Valencia Castelletto Misana Vallelunga Cellole Montagnana Varano E storil Monza FRANCIA Most Franciacorta Mugello GET TEST Nardo Create new Create copy Delete Map rotation deg b ww Once the item Finish Line has been selected in the drop down menu in the upper left part of the screen it is possible to define its corresponding position in the track FL clicking on the image of the track and dragging the mouse holding down the left mouse button realising a line with the dimensions desired Releasing the mouse button the finish line is permanently positioned Make sure that the finish line intersects the track otherwise the laps cannot be calculated It is recommended that a line perpendicular to the direction of movement and with a suitable length be created It should not be too short otherwise ther
48. the differences in the track positions at a given instant when a comparison of several laps is being performed If Distance is set it will be easier to evaluate the differences in time at a given point when a comparison of several laps is being performed Enlarges the graph area Reduces the graph area Visualises the entire lap selected in the graph area Executes the zoom on a selected area pressing the button and then later clicking on the graph and dragging the mouse horizontally in such a manner as to draw a selection rectangle a context menu will appear releasing the mouse button from which it is possible to choose the item Zoom that enables the area selected to be enlarged or MaxMin that generates a window with maximum and minimum values of all of the channels in the selected area Activates deactivates the comparison of trajectories among the laps selected if pressed while comparing several laps the button will differentiate the different GPS trajectories with different colours visualised in the Track Bar to enable a faster analysis Enlarges the track visualised in the track window Track Bar The zoom will be centred in the area in which the cursor is positioned coloured dot visualised in the track Reduces the track visualised in the track window Track Bar The zoom will be centred in the area in which the cursor is positioned coloured dot visualised in the track Resets the visualisation of the tracks in th
49. tion track library User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved nu Dv Pa TT m Z G U I 6 5 MD60LOG Interface Area The MD60Log Interface area enables the administration of the track library for the MD60LOG unit Upload track library from Pc to MD6O LOG ees Download track library from MD60 LOG to Pe For further information please refer to the relative chapter 6 6 Track window Track Bar The Track Bar window is located by default in the lower right hand side of the program window In this area the image of the track associated with the session being analysed is displayed In the case in which more than one lap has been added to the current display the trajectory of the selected lap will be shown The part of the lap displayed in the analysis window is indicated in the track window with a white line beside the selected lap trajectory This line is visible only if not in trajectory analysis mode button F of the menu bar not selected In the track window Track Bar a circle indicator the same colour as the lap selected will appear automatically The indicator will always be in the same position as the cursor in the analysis window moving the cursor the position indicator will shift into the corresponding position on the track User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights res
50. tton and stand by for the visualisation of the following screen E project sxp a xi __ File Analysis Track View Options 7 2 ATO ENI PLEASE LOAD A SESSION Upload track library from Pc to MD60 LOG CONNECTION STATUS Download track library from MD60 LOG to Pc NO TRACK SELECTED User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 6 1 MX2 LITE Software Window L Ce MX2 project1 sxp fe __ File Analysis Track View Options 0X Z PS SA R l B o MAI amp BYE PLEASE LOAD A SESSION A Upload track library from Pc to MD60 LOG fe 5 Download track library from MD60 LOG to Pc NO TRACK SELECTED CONNECTION STATUS In the figure the different zones of the MX2 LITE window are identified A Analysis Area B Tool Bar Menu C Navigation Bar D Track Library Management Window MD60LOG MD60LOG Interface E Track Window Trackbar User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 6 1 1 Analysis area m m The analysis area is the main zone for the MX2 LITE software In this window the values of the channels D acquired are shown in a graphic representation x File Analysis Track wiew Options Sx rin gt F R R RARA N 9 ANALYSIS TABLE OF CURSOR CHANNELS VALUE INTERMEDIATE 22400 22600 22800 Upload track library
51. w Create copy Delete Map rotation deg o coh On the portion of the track clicked on the type colour selected will be assigned then a name will be requested to define the segment As a default option the segments are identified with a number the value of which is increased each time However it is also possible to specify a customised name clicking on the left mouse button in correspondence with the text box with the number on the left of the OK button Press OK to assign the name to the segment SEGMENT NAME FIELD OK BUTTON The portions of the track which are not assigned a colour and which therefore remain blue identify straightaways To eliminate a segment click on one of the ends of the line that delimits it and then take it outside of the track line so that it does not intersect it The segment will be eliminated automatically To eliminate all of the segments in a track make sure that the item Segments is selected in the left menu then press the Eraser button User Manual GATE LITE rev 02 Copyright 2010 GET by Athena Evolution srl All rights reserved 9 3 7 Rotation and zoom of the selected track To insert a finish line and the split points in a precise manner position them on the track then use the Zoom forward button to enlarge the corresponding part of the track PIPI It is possible to correct the position of the line just entered having an enlargement of that part of the track on

GATE - LITE USER MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents